Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 735 insertions, 0 deletions

diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c
new file mode 100644
index 00000000000..88641e5095b
--- /dev/null
+++ b/arch/ia64/pci/pci.c
@@ -0,0 +1,735 @@
+/*
+ * pci.c - Low-Level PCI Access in IA-64
+ *
+ * Derived from bios32.c of i386 tree.
+ *
+ * (c) Copyright 2002, 2005 Hewlett-Packard Development Company, L.P.
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ *	Bjorn Helgaas <bjorn.helgaas@hp.com>
+ * Copyright (C) 2004 Silicon Graphics, Inc.
+ *
+ * Note: Above list of copyright holders is incomplete...
+ */
+#include <linux/config.h>
+
+#include <linux/acpi.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/smp_lock.h>
+#include <linux/spinlock.h>
+
+#include <asm/machvec.h>
+#include <asm/page.h>
+#include <asm/segment.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/sal.h>
+#include <asm/smp.h>
+#include <asm/irq.h>
+#include <asm/hw_irq.h>
+
+
+static int pci_routeirq;
+
+/*
+ * Low-level SAL-based PCI configuration access functions. Note that SAL
+ * calls are already serialized (via sal_lock), so we don't need another
+ * synchronization mechanism here.
+ */
+
+#define PCI_SAL_ADDRESS(seg, bus, devfn, reg)		\
+	(((u64) seg << 24) | (bus << 16) | (devfn << 8) | (reg))
+
+/* SAL 3.2 adds support for extended config space. */
+
+#define PCI_SAL_EXT_ADDRESS(seg, bus, devfn, reg)	\
+	(((u64) seg << 28) | (bus << 20) | (devfn << 12) | (reg))
+
+static int
+pci_sal_read (unsigned int seg, unsigned int bus, unsigned int devfn,
+	      int reg, int len, u32 *value)
+{
+	u64 addr, data = 0;
+	int mode, result;
+
+	if (!value || (seg > 65535) || (bus > 255) || (devfn > 255) || (reg > 4095))
+		return -EINVAL;
+
+	if ((seg | reg) <= 255) {
+		addr = PCI_SAL_ADDRESS(seg, bus, devfn, reg);
+		mode = 0;
+	} else {
+		addr = PCI_SAL_EXT_ADDRESS(seg, bus, devfn, reg);
+		mode = 1;
+	}
+	result = ia64_sal_pci_config_read(addr, mode, len, &data);
+	if (result != 0)
+		return -EINVAL;
+
+	*value = (u32) data;
+	return 0;
+}
+
+static int
+pci_sal_write (unsigned int seg, unsigned int bus, unsigned int devfn,
+	       int reg, int len, u32 value)
+{
+	u64 addr;
+	int mode, result;
+
+	if ((seg > 65535) || (bus > 255) || (devfn > 255) || (reg > 4095))
+		return -EINVAL;
+
+	if ((seg | reg) <= 255) {
+		addr = PCI_SAL_ADDRESS(seg, bus, devfn, reg);
+		mode = 0;
+	} else {
+		addr = PCI_SAL_EXT_ADDRESS(seg, bus, devfn, reg);
+		mode = 1;
+	}
+	result = ia64_sal_pci_config_write(addr, mode, len, value);
+	if (result != 0)
+		return -EINVAL;
+	return 0;
+}
+
+static struct pci_raw_ops pci_sal_ops = {
+	.read = 	pci_sal_read,
+	.write =	pci_sal_write
+};
+
+struct pci_raw_ops *raw_pci_ops = &pci_sal_ops;
+
+static int
+pci_read (struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value)
+{
+	return raw_pci_ops->read(pci_domain_nr(bus), bus->number,
+				 devfn, where, size, value);
+}
+
+static int
+pci_write (struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value)
+{
+	return raw_pci_ops->write(pci_domain_nr(bus), bus->number,
+				  devfn, where, size, value);
+}
+
+struct pci_ops pci_root_ops = {
+	.read = pci_read,
+	.write = pci_write,
+};
+
+#ifdef CONFIG_NUMA
+extern acpi_status acpi_map_iosapic(acpi_handle, u32, void *, void **);
+static void acpi_map_iosapics(void)
+{
+	acpi_get_devices(NULL, acpi_map_iosapic, NULL, NULL);
+}
+#else
+static void acpi_map_iosapics(void)
+{
+	return;
+}
+#endif /* CONFIG_NUMA */
+
+static int __init
+pci_acpi_init (void)
+{
+	struct pci_dev *dev = NULL;
+
+	printk(KERN_INFO "PCI: Using ACPI for IRQ routing\n");
+
+	acpi_map_iosapics();
+
+	if (pci_routeirq) {
+		/*
+		 * PCI IRQ routing is set up by pci_enable_device(), but we
+		 * also do it here in case there are still broken drivers that
+		 * don't use pci_enable_device().
+		 */
+		printk(KERN_INFO "PCI: Routing interrupts for all devices because \"pci=routeirq\" specified\n");
+		for_each_pci_dev(dev)
+			acpi_pci_irq_enable(dev);
+	} else
+		printk(KERN_INFO "PCI: If a device doesn't work, try \"pci=routeirq\".  If it helps, post a report\n");
+
+	return 0;
+}
+
+subsys_initcall(pci_acpi_init);
+
+/* Called by ACPI when it finds a new root bus.  */
+
+static struct pci_controller * __devinit
+alloc_pci_controller (int seg)
+{
+	struct pci_controller *controller;
+
+	controller = kmalloc(sizeof(*controller), GFP_KERNEL);
+	if (!controller)
+		return NULL;
+
+	memset(controller, 0, sizeof(*controller));
+	controller->segment = seg;
+	return controller;
+}
+
+static u64 __devinit
+add_io_space (struct acpi_resource_address64 *addr)
+{
+	u64 offset;
+	int sparse = 0;
+	int i;
+
+	if (addr->address_translation_offset == 0)
+		return IO_SPACE_BASE(0);	/* part of legacy IO space */
+
+	if (addr->attribute.io.translation_attribute == ACPI_SPARSE_TRANSLATION)
+		sparse = 1;
+
+	offset = (u64) ioremap(addr->address_translation_offset, 0);
+	for (i = 0; i < num_io_spaces; i++)
+		if (io_space[i].mmio_base == offset &&
+		    io_space[i].sparse == sparse)
+			return IO_SPACE_BASE(i);
+
+	if (num_io_spaces == MAX_IO_SPACES) {
+		printk("Too many IO port spaces\n");
+		return ~0;
+	}
+
+	i = num_io_spaces++;
+	io_space[i].mmio_base = offset;
+	io_space[i].sparse = sparse;
+
+	return IO_SPACE_BASE(i);
+}
+
+static acpi_status __devinit
+count_window (struct acpi_resource *resource, void *data)
+{
+	unsigned int *windows = (unsigned int *) data;
+	struct acpi_resource_address64 addr;
+	acpi_status status;
+
+	status = acpi_resource_to_address64(resource, &addr);
+	if (ACPI_SUCCESS(status))
+		if (addr.resource_type == ACPI_MEMORY_RANGE ||
+		    addr.resource_type == ACPI_IO_RANGE)
+			(*windows)++;
+
+	return AE_OK;
+}
+
+struct pci_root_info {
+	struct pci_controller *controller;
+	char *name;
+};
+
+static __devinit acpi_status add_window(struct acpi_resource *res, void *data)
+{
+	struct pci_root_info *info = data;
+	struct pci_window *window;
+	struct acpi_resource_address64 addr;
+	acpi_status status;
+	unsigned long flags, offset = 0;
+	struct resource *root;
+
+	status = acpi_resource_to_address64(res, &addr);
+	if (!ACPI_SUCCESS(status))
+		return AE_OK;
+
+	if (!addr.address_length)
+		return AE_OK;
+
+	if (addr.resource_type == ACPI_MEMORY_RANGE) {
+		flags = IORESOURCE_MEM;
+		root = &iomem_resource;
+		offset = addr.address_translation_offset;
+	} else if (addr.resource_type == ACPI_IO_RANGE) {
+		flags = IORESOURCE_IO;
+		root = &ioport_resource;
+		offset = add_io_space(&addr);
+		if (offset == ~0)
+			return AE_OK;
+	} else
+		return AE_OK;
+
+	window = &info->controller->window[info->controller->windows++];
+	window->resource.name = info->name;
+	window->resource.flags = flags;
+	window->resource.start = addr.min_address_range + offset;
+	window->resource.end = addr.max_address_range + offset;
+	window->resource.child = NULL;
+	window->offset = offset;
+
+	if (insert_resource(root, &window->resource)) {
+		printk(KERN_ERR "alloc 0x%lx-0x%lx from %s for %s failed\n",
+			window->resource.start, window->resource.end,
+			root->name, info->name);
+	}
+
+	return AE_OK;
+}
+
+static void __devinit
+pcibios_setup_root_windows(struct pci_bus *bus, struct pci_controller *ctrl)
+{
+	int i, j;
+
+	j = 0;
+	for (i = 0; i < ctrl->windows; i++) {
+		struct resource *res = &ctrl->window[i].resource;
+		/* HP's firmware has a hack to work around a Windows bug.
+		 * Ignore these tiny memory ranges */
+		if ((res->flags & IORESOURCE_MEM) &&
+		    (res->end - res->start < 16))
+			continue;
+		if (j >= PCI_BUS_NUM_RESOURCES) {
+			printk("Ignoring range [%lx-%lx] (%lx)\n", res->start,
+					res->end, res->flags);
+			continue;
+		}
+		bus->resource[j++] = res;
+	}
+}
+
+struct pci_bus * __devinit
+pci_acpi_scan_root(struct acpi_device *device, int domain, int bus)
+{
+	struct pci_root_info info;
+	struct pci_controller *controller;
+	unsigned int windows = 0;
+	struct pci_bus *pbus;
+	char *name;
+
+	controller = alloc_pci_controller(domain);
+	if (!controller)
+		goto out1;
+
+	controller->acpi_handle = device->handle;
+
+	acpi_walk_resources(device->handle, METHOD_NAME__CRS, count_window,
+			&windows);
+	controller->window = kmalloc(sizeof(*controller->window) * windows,
+			GFP_KERNEL);
+	if (!controller->window)
+		goto out2;
+
+	name = kmalloc(16, GFP_KERNEL);
+	if (!name)
+		goto out3;
+
+	sprintf(name, "PCI Bus %04x:%02x", domain, bus);
+	info.controller = controller;
+	info.name = name;
+	acpi_walk_resources(device->handle, METHOD_NAME__CRS, add_window,
+			&info);
+
+	pbus = pci_scan_bus(bus, &pci_root_ops, controller);
+	if (pbus)
+		pcibios_setup_root_windows(pbus, controller);
+
+	return pbus;
+
+out3:
+	kfree(controller->window);
+out2:
+	kfree(controller);
+out1:
+	return NULL;
+}
+
+void pcibios_resource_to_bus(struct pci_dev *dev,
+		struct pci_bus_region *region, struct resource *res)
+{
+	struct pci_controller *controller = PCI_CONTROLLER(dev);
+	unsigned long offset = 0;
+	int i;
+
+	for (i = 0; i < controller->windows; i++) {
+		struct pci_window *window = &controller->window[i];
+		if (!(window->resource.flags & res->flags))
+			continue;
+		if (window->resource.start > res->start)
+			continue;
+		if (window->resource.end < res->end)
+			continue;
+		offset = window->offset;
+		break;
+	}
+
+	region->start = res->start - offset;
+	region->end = res->end - offset;
+}
+EXPORT_SYMBOL(pcibios_resource_to_bus);
+
+void pcibios_bus_to_resource(struct pci_dev *dev,
+		struct resource *res, struct pci_bus_region *region)
+{
+	struct pci_controller *controller = PCI_CONTROLLER(dev);
+	unsigned long offset = 0;
+	int i;
+
+	for (i = 0; i < controller->windows; i++) {
+		struct pci_window *window = &controller->window[i];
+		if (!(window->resource.flags & res->flags))
+			continue;
+		if (window->resource.start - window->offset > region->start)
+			continue;
+		if (window->resource.end - window->offset < region->end)
+			continue;
+		offset = window->offset;
+		break;
+	}
+
+	res->start = region->start + offset;
+	res->end = region->end + offset;
+}
+
+static void __devinit pcibios_fixup_device_resources(struct pci_dev *dev)
+{
+	struct pci_bus_region region;
+	int i;
+	int limit = (dev->hdr_type == PCI_HEADER_TYPE_NORMAL) ? \
+		PCI_BRIDGE_RESOURCES : PCI_NUM_RESOURCES;
+
+	for (i = 0; i < limit; i++) {
+		if (!dev->resource[i].flags)
+			continue;
+		region.start = dev->resource[i].start;
+		region.end = dev->resource[i].end;
+		pcibios_bus_to_resource(dev, &dev->resource[i], &region);
+		pci_claim_resource(dev, i);
+	}
+}
+
+/*
+ *  Called after each bus is probed, but before its children are examined.
+ */
+void __devinit
+pcibios_fixup_bus (struct pci_bus *b)
+{
+	struct pci_dev *dev;
+
+	list_for_each_entry(dev, &b->devices, bus_list)
+		pcibios_fixup_device_resources(dev);
+
+	return;
+}
+
+void __devinit
+pcibios_update_irq (struct pci_dev *dev, int irq)
+{
+	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
+
+	/* ??? FIXME -- record old value for shutdown.  */
+}
+
+static inline int
+pcibios_enable_resources (struct pci_dev *dev, int mask)
+{
+	u16 cmd, old_cmd;
+	int idx;
+	struct resource *r;
+
+	if (!dev)
+		return -EINVAL;
+
+	pci_read_config_word(dev, PCI_COMMAND, &cmd);
+	old_cmd = cmd;
+	for (idx=0; idx<6; idx++) {
+		/* Only set up the desired resources.  */
+		if (!(mask & (1 << idx)))
+			continue;
+
+		r = &dev->resource[idx];
+		if (!r->start && r->end) {
+			printk(KERN_ERR
+			       "PCI: Device %s not available because of resource collisions\n",
+			       pci_name(dev));
+			return -EINVAL;
+		}
+		if (r->flags & IORESOURCE_IO)
+			cmd |= PCI_COMMAND_IO;
+		if (r->flags & IORESOURCE_MEM)
+			cmd |= PCI_COMMAND_MEMORY;
+	}
+	if (dev->resource[PCI_ROM_RESOURCE].start)
+		cmd |= PCI_COMMAND_MEMORY;
+	if (cmd != old_cmd) {
+		printk("PCI: Enabling device %s (%04x -> %04x)\n", pci_name(dev), old_cmd, cmd);
+		pci_write_config_word(dev, PCI_COMMAND, cmd);
+	}
+	return 0;
+}
+
+int
+pcibios_enable_device (struct pci_dev *dev, int mask)
+{
+	int ret;
+
+	ret = pcibios_enable_resources(dev, mask);
+	if (ret < 0)
+		return ret;
+
+	return acpi_pci_irq_enable(dev);
+}
+
+#ifdef CONFIG_ACPI_DEALLOCATE_IRQ
+void
+pcibios_disable_device (struct pci_dev *dev)
+{
+	acpi_pci_irq_disable(dev);
+}
+#endif /* CONFIG_ACPI_DEALLOCATE_IRQ */
+
+void
+pcibios_align_resource (void *data, struct resource *res,
+		        unsigned long size, unsigned long align)
+{
+}
+
+/*
+ * PCI BIOS setup, always defaults to SAL interface
+ */
+char * __init
+pcibios_setup (char *str)
+{
+	if (!strcmp(str, "routeirq"))
+		pci_routeirq = 1;
+	return NULL;
+}
+
+int
+pci_mmap_page_range (struct pci_dev *dev, struct vm_area_struct *vma,
+		     enum pci_mmap_state mmap_state, int write_combine)
+{
+	/*
+	 * I/O space cannot be accessed via normal processor loads and
+	 * stores on this platform.
+	 */
+	if (mmap_state == pci_mmap_io)
+		/*
+		 * XXX we could relax this for I/O spaces for which ACPI
+		 * indicates that the space is 1-to-1 mapped.  But at the
+		 * moment, we don't support multiple PCI address spaces and
+		 * the legacy I/O space is not 1-to-1 mapped, so this is moot.
+		 */
+		return -EINVAL;
+
+	/*
+	 * Leave vm_pgoff as-is, the PCI space address is the physical
+	 * address on this platform.
+	 */
+	vma->vm_flags |= (VM_SHM | VM_RESERVED | VM_IO);
+
+	if (write_combine && efi_range_is_wc(vma->vm_start,
+					     vma->vm_end - vma->vm_start))
+		vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
+	else
+		vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+
+	if (remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
+			     vma->vm_end - vma->vm_start, vma->vm_page_prot))
+		return -EAGAIN;
+
+	return 0;
+}
+
+/**
+ * ia64_pci_get_legacy_mem - generic legacy mem routine
+ * @bus: bus to get legacy memory base address for
+ *
+ * Find the base of legacy memory for @bus.  This is typically the first
+ * megabyte of bus address space for @bus or is simply 0 on platforms whose
+ * chipsets support legacy I/O and memory routing.  Returns the base address
+ * or an error pointer if an error occurred.
+ *
+ * This is the ia64 generic version of this routine.  Other platforms
+ * are free to override it with a machine vector.
+ */
+char *ia64_pci_get_legacy_mem(struct pci_bus *bus)
+{
+	return (char *)__IA64_UNCACHED_OFFSET;
+}
+
+/**
+ * pci_mmap_legacy_page_range - map legacy memory space to userland
+ * @bus: bus whose legacy space we're mapping
+ * @vma: vma passed in by mmap
+ *
+ * Map legacy memory space for this device back to userspace using a machine
+ * vector to get the base address.
+ */
+int
+pci_mmap_legacy_page_range(struct pci_bus *bus, struct vm_area_struct *vma)
+{
+	char *addr;
+
+	addr = pci_get_legacy_mem(bus);
+	if (IS_ERR(addr))
+		return PTR_ERR(addr);
+
+	vma->vm_pgoff += (unsigned long)addr >> PAGE_SHIFT;
+	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+	vma->vm_flags |= (VM_SHM | VM_RESERVED | VM_IO);
+
+	if (remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
+			    vma->vm_end - vma->vm_start, vma->vm_page_prot))
+		return -EAGAIN;
+
+	return 0;
+}
+
+/**
+ * ia64_pci_legacy_read - read from legacy I/O space
+ * @bus: bus to read
+ * @port: legacy port value
+ * @val: caller allocated storage for returned value
+ * @size: number of bytes to read
+ *
+ * Simply reads @size bytes from @port and puts the result in @val.
+ *
+ * Again, this (and the write routine) are generic versions that can be
+ * overridden by the platform.  This is necessary on platforms that don't
+ * support legacy I/O routing or that hard fail on legacy I/O timeouts.
+ */
+int ia64_pci_legacy_read(struct pci_bus *bus, u16 port, u32 *val, u8 size)
+{
+	int ret = size;
+
+	switch (size) {
+	case 1:
+		*val = inb(port);
+		break;
+	case 2:
+		*val = inw(port);
+		break;
+	case 4:
+		*val = inl(port);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	return ret;
+}
+
+/**
+ * ia64_pci_legacy_write - perform a legacy I/O write
+ * @bus: bus pointer
+ * @port: port to write
+ * @val: value to write
+ * @size: number of bytes to write from @val
+ *
+ * Simply writes @size bytes of @val to @port.
+ */
+int ia64_pci_legacy_write(struct pci_dev *bus, u16 port, u32 val, u8 size)
+{
+	int ret = 0;
+
+	switch (size) {
+	case 1:
+		outb(val, port);
+		break;
+	case 2:
+		outw(val, port);
+		break;
+	case 4:
+		outl(val, port);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	return ret;
+}
+
+/**
+ * pci_cacheline_size - determine cacheline size for PCI devices
+ * @dev: void
+ *
+ * We want to use the line-size of the outer-most cache.  We assume
+ * that this line-size is the same for all CPUs.
+ *
+ * Code mostly taken from arch/ia64/kernel/palinfo.c:cache_info().
+ *
+ * RETURNS: An appropriate -ERRNO error value on eror, or zero for success.
+ */
+static unsigned long
+pci_cacheline_size (void)
+{
+	u64 levels, unique_caches;
+	s64 status;
+	pal_cache_config_info_t cci;
+	static u8 cacheline_size;
+
+	if (cacheline_size)
+		return cacheline_size;
+
+	status = ia64_pal_cache_summary(&levels, &unique_caches);
+	if (status != 0) {
+		printk(KERN_ERR "%s: ia64_pal_cache_summary() failed (status=%ld)\n",
+		       __FUNCTION__, status);
+		return SMP_CACHE_BYTES;
+	}
+
+	status = ia64_pal_cache_config_info(levels - 1, /* cache_type (data_or_unified)= */ 2,
+					    &cci);
+	if (status != 0) {
+		printk(KERN_ERR "%s: ia64_pal_cache_config_info() failed (status=%ld)\n",
+		       __FUNCTION__, status);
+		return SMP_CACHE_BYTES;
+	}
+	cacheline_size = 1 << cci.pcci_line_size;
+	return cacheline_size;
+}
+
+/**
+ * pcibios_prep_mwi - helper function for drivers/pci/pci.c:pci_set_mwi()
+ * @dev: the PCI device for which MWI is enabled
+ *
+ * For ia64, we can get the cacheline sizes from PAL.
+ *
+ * RETURNS: An appropriate -ERRNO error value on eror, or zero for success.
+ */
+int
+pcibios_prep_mwi (struct pci_dev *dev)
+{
+	unsigned long desired_linesize, current_linesize;
+	int rc = 0;
+	u8 pci_linesize;
+
+	desired_linesize = pci_cacheline_size();
+
+	pci_read_config_byte(dev, PCI_CACHE_LINE_SIZE, &pci_linesize);
+	current_linesize = 4 * pci_linesize;
+	if (desired_linesize != current_linesize) {
+		printk(KERN_WARNING "PCI: slot %s has incorrect PCI cache line size of %lu bytes,",
+		       pci_name(dev), current_linesize);
+		if (current_linesize > desired_linesize) {
+			printk(" expected %lu bytes instead\n", desired_linesize);
+			rc = -EINVAL;
+		} else {
+			printk(" correcting to %lu\n", desired_linesize);
+			pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, desired_linesize / 4);
+		}
+	}
+	return rc;
+}
+
+int pci_vector_resources(int last, int nr_released)
+{
+	int count = nr_released;
+
+ 	count += (IA64_LAST_DEVICE_VECTOR - last);
+
+	return count;
+}