Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

7 files changed, 1403 insertions, 0 deletions

diff --git a/arch/ia64/sn/pci/Makefile b/arch/ia64/sn/pci/Makefile
new file mode 100644
index 00000000000..b5dca0097a8
--- /dev/null
+++ b/arch/ia64/sn/pci/Makefile
@@ -0,0 +1,10 @@
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 2000-2004 Silicon Graphics, Inc.  All Rights Reserved.
+#
+# Makefile for the sn pci general routines.
+
+obj-y := pci_dma.o pcibr/ 
diff --git a/arch/ia64/sn/pci/pci_dma.c b/arch/ia64/sn/pci/pci_dma.c
new file mode 100644
index 00000000000..f680824f819
--- /dev/null
+++ b/arch/ia64/sn/pci/pci_dma.c
@@ -0,0 +1,363 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2000,2002-2005 Silicon Graphics, Inc. All rights reserved.
+ *
+ * Routines for PCI DMA mapping.  See Documentation/DMA-API.txt for
+ * a description of how these routines should be used.
+ */
+
+#include <linux/module.h>
+#include <asm/dma.h>
+#include <asm/sn/sn_sal.h>
+#include "pci/pcibus_provider_defs.h"
+#include "pci/pcidev.h"
+#include "pci/pcibr_provider.h"
+
+#define SG_ENT_VIRT_ADDRESS(sg)	(page_address((sg)->page) + (sg)->offset)
+#define SG_ENT_PHYS_ADDRESS(SG)	virt_to_phys(SG_ENT_VIRT_ADDRESS(SG))
+
+/**
+ * sn_dma_supported - test a DMA mask
+ * @dev: device to test
+ * @mask: DMA mask to test
+ *
+ * Return whether the given PCI device DMA address mask can be supported
+ * properly.  For example, if your device can only drive the low 24-bits
+ * during PCI bus mastering, then you would pass 0x00ffffff as the mask to
+ * this function.  Of course, SN only supports devices that have 32 or more
+ * address bits when using the PMU.
+ */
+int sn_dma_supported(struct device *dev, u64 mask)
+{
+	BUG_ON(dev->bus != &pci_bus_type);
+
+	if (mask < 0x7fffffff)
+		return 0;
+	return 1;
+}
+EXPORT_SYMBOL(sn_dma_supported);
+
+/**
+ * sn_dma_set_mask - set the DMA mask
+ * @dev: device to set
+ * @dma_mask: new mask
+ *
+ * Set @dev's DMA mask if the hw supports it.
+ */
+int sn_dma_set_mask(struct device *dev, u64 dma_mask)
+{
+	BUG_ON(dev->bus != &pci_bus_type);
+
+	if (!sn_dma_supported(dev, dma_mask))
+		return 0;
+
+	*dev->dma_mask = dma_mask;
+	return 1;
+}
+EXPORT_SYMBOL(sn_dma_set_mask);
+
+/**
+ * sn_dma_alloc_coherent - allocate memory for coherent DMA
+ * @dev: device to allocate for
+ * @size: size of the region
+ * @dma_handle: DMA (bus) address
+ * @flags: memory allocation flags
+ *
+ * dma_alloc_coherent() returns a pointer to a memory region suitable for
+ * coherent DMA traffic to/from a PCI device.  On SN platforms, this means
+ * that @dma_handle will have the %PCIIO_DMA_CMD flag set.
+ *
+ * This interface is usually used for "command" streams (e.g. the command
+ * queue for a SCSI controller).  See Documentation/DMA-API.txt for
+ * more information.
+ */
+void *sn_dma_alloc_coherent(struct device *dev, size_t size,
+			    dma_addr_t * dma_handle, int flags)
+{
+	void *cpuaddr;
+	unsigned long phys_addr;
+	struct pcidev_info *pcidev_info = SN_PCIDEV_INFO(to_pci_dev(dev));
+
+	BUG_ON(dev->bus != &pci_bus_type);
+
+	/*
+	 * Allocate the memory.
+	 * FIXME: We should be doing alloc_pages_node for the node closest
+	 *        to the PCI device.
+	 */
+	if (!(cpuaddr = (void *)__get_free_pages(GFP_ATOMIC, get_order(size))))
+		return NULL;
+
+	memset(cpuaddr, 0x0, size);
+
+	/* physical addr. of the memory we just got */
+	phys_addr = __pa(cpuaddr);
+
+	/*
+	 * 64 bit address translations should never fail.
+	 * 32 bit translations can fail if there are insufficient mapping
+	 * resources.
+	 */
+
+	*dma_handle = pcibr_dma_map(pcidev_info, phys_addr, size,
+				    SN_PCIDMA_CONSISTENT);
+	if (!*dma_handle) {
+		printk(KERN_ERR "%s: out of ATEs\n", __FUNCTION__);
+		free_pages((unsigned long)cpuaddr, get_order(size));
+		return NULL;
+	}
+
+	return cpuaddr;
+}
+EXPORT_SYMBOL(sn_dma_alloc_coherent);
+
+/**
+ * sn_pci_free_coherent - free memory associated with coherent DMAable region
+ * @dev: device to free for
+ * @size: size to free
+ * @cpu_addr: kernel virtual address to free
+ * @dma_handle: DMA address associated with this region
+ *
+ * Frees the memory allocated by dma_alloc_coherent(), potentially unmapping
+ * any associated IOMMU mappings.
+ */
+void sn_dma_free_coherent(struct device *dev, size_t size, void *cpu_addr,
+			  dma_addr_t dma_handle)
+{
+	struct pcidev_info *pcidev_info = SN_PCIDEV_INFO(to_pci_dev(dev));
+
+	BUG_ON(dev->bus != &pci_bus_type);
+
+	pcibr_dma_unmap(pcidev_info, dma_handle, 0);
+	free_pages((unsigned long)cpu_addr, get_order(size));
+}
+EXPORT_SYMBOL(sn_dma_free_coherent);
+
+/**
+ * sn_dma_map_single - map a single page for DMA
+ * @dev: device to map for
+ * @cpu_addr: kernel virtual address of the region to map
+ * @size: size of the region
+ * @direction: DMA direction
+ *
+ * Map the region pointed to by @cpu_addr for DMA and return the
+ * DMA address.
+ *
+ * We map this to the one step pcibr_dmamap_trans interface rather than
+ * the two step pcibr_dmamap_alloc/pcibr_dmamap_addr because we have
+ * no way of saving the dmamap handle from the alloc to later free
+ * (which is pretty much unacceptable).
+ *
+ * TODO: simplify our interface;
+ *       figure out how to save dmamap handle so can use two step.
+ */
+dma_addr_t sn_dma_map_single(struct device *dev, void *cpu_addr, size_t size,
+			     int direction)
+{
+	dma_addr_t dma_addr;
+	unsigned long phys_addr;
+	struct pcidev_info *pcidev_info = SN_PCIDEV_INFO(to_pci_dev(dev));
+
+	BUG_ON(dev->bus != &pci_bus_type);
+
+	phys_addr = __pa(cpu_addr);
+	dma_addr = pcibr_dma_map(pcidev_info, phys_addr, size, 0);
+	if (!dma_addr) {
+		printk(KERN_ERR "%s: out of ATEs\n", __FUNCTION__);
+		return 0;
+	}
+	return dma_addr;
+}
+EXPORT_SYMBOL(sn_dma_map_single);
+
+/**
+ * sn_dma_unmap_single - unamp a DMA mapped page
+ * @dev: device to sync
+ * @dma_addr: DMA address to sync
+ * @size: size of region
+ * @direction: DMA direction
+ *
+ * This routine is supposed to sync the DMA region specified
+ * by @dma_handle into the coherence domain.  On SN, we're always cache
+ * coherent, so we just need to free any ATEs associated with this mapping.
+ */
+void sn_dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
+			 int direction)
+{
+	struct pcidev_info *pcidev_info = SN_PCIDEV_INFO(to_pci_dev(dev));
+
+	BUG_ON(dev->bus != &pci_bus_type);
+	pcibr_dma_unmap(pcidev_info, dma_addr, direction);
+}
+EXPORT_SYMBOL(sn_dma_unmap_single);
+
+/**
+ * sn_dma_unmap_sg - unmap a DMA scatterlist
+ * @dev: device to unmap
+ * @sg: scatterlist to unmap
+ * @nhwentries: number of scatterlist entries
+ * @direction: DMA direction
+ *
+ * Unmap a set of streaming mode DMA translations.
+ */
+void sn_dma_unmap_sg(struct device *dev, struct scatterlist *sg,
+		     int nhwentries, int direction)
+{
+	int i;
+	struct pcidev_info *pcidev_info = SN_PCIDEV_INFO(to_pci_dev(dev));
+
+	BUG_ON(dev->bus != &pci_bus_type);
+
+	for (i = 0; i < nhwentries; i++, sg++) {
+		pcibr_dma_unmap(pcidev_info, sg->dma_address, direction);
+		sg->dma_address = (dma_addr_t) NULL;
+		sg->dma_length = 0;
+	}
+}
+EXPORT_SYMBOL(sn_dma_unmap_sg);
+
+/**
+ * sn_dma_map_sg - map a scatterlist for DMA
+ * @dev: device to map for
+ * @sg: scatterlist to map
+ * @nhwentries: number of entries
+ * @direction: direction of the DMA transaction
+ *
+ * Maps each entry of @sg for DMA.
+ */
+int sn_dma_map_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
+		  int direction)
+{
+	unsigned long phys_addr;
+	struct scatterlist *saved_sg = sg;
+	struct pcidev_info *pcidev_info = SN_PCIDEV_INFO(to_pci_dev(dev));
+	int i;
+
+	BUG_ON(dev->bus != &pci_bus_type);
+
+	/*
+	 * Setup a DMA address for each entry in the scatterlist.
+	 */
+	for (i = 0; i < nhwentries; i++, sg++) {
+		phys_addr = SG_ENT_PHYS_ADDRESS(sg);
+		sg->dma_address = pcibr_dma_map(pcidev_info, phys_addr,
+						sg->length, 0);
+
+		if (!sg->dma_address) {
+			printk(KERN_ERR "%s: out of ATEs\n", __FUNCTION__);
+
+			/*
+			 * Free any successfully allocated entries.
+			 */
+			if (i > 0)
+				sn_dma_unmap_sg(dev, saved_sg, i, direction);
+			return 0;
+		}
+
+		sg->dma_length = sg->length;
+	}
+
+	return nhwentries;
+}
+EXPORT_SYMBOL(sn_dma_map_sg);
+
+void sn_dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
+				size_t size, int direction)
+{
+	BUG_ON(dev->bus != &pci_bus_type);
+}
+EXPORT_SYMBOL(sn_dma_sync_single_for_cpu);
+
+void sn_dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle,
+				   size_t size, int direction)
+{
+	BUG_ON(dev->bus != &pci_bus_type);
+}
+EXPORT_SYMBOL(sn_dma_sync_single_for_device);
+
+void sn_dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
+			    int nelems, int direction)
+{
+	BUG_ON(dev->bus != &pci_bus_type);
+}
+EXPORT_SYMBOL(sn_dma_sync_sg_for_cpu);
+
+void sn_dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
+			       int nelems, int direction)
+{
+	BUG_ON(dev->bus != &pci_bus_type);
+}
+EXPORT_SYMBOL(sn_dma_sync_sg_for_device);
+
+int sn_dma_mapping_error(dma_addr_t dma_addr)
+{
+	return 0;
+}
+EXPORT_SYMBOL(sn_dma_mapping_error);
+
+char *sn_pci_get_legacy_mem(struct pci_bus *bus)
+{
+	if (!SN_PCIBUS_BUSSOFT(bus))
+		return ERR_PTR(-ENODEV);
+
+	return (char *)(SN_PCIBUS_BUSSOFT(bus)->bs_legacy_mem | __IA64_UNCACHED_OFFSET);
+}
+
+int sn_pci_legacy_read(struct pci_bus *bus, u16 port, u32 *val, u8 size)
+{
+	unsigned long addr;
+	int ret;
+
+	if (!SN_PCIBUS_BUSSOFT(bus))
+		return -ENODEV;
+
+	addr = SN_PCIBUS_BUSSOFT(bus)->bs_legacy_io | __IA64_UNCACHED_OFFSET;
+	addr += port;
+
+	ret = ia64_sn_probe_mem(addr, (long)size, (void *)val);
+
+	if (ret == 2)
+		return -EINVAL;
+
+	if (ret == 1)
+		*val = -1;
+
+	return size;
+}
+
+int sn_pci_legacy_write(struct pci_bus *bus, u16 port, u32 val, u8 size)
+{
+	int ret = size;
+	unsigned long paddr;
+	unsigned long *addr;
+
+	if (!SN_PCIBUS_BUSSOFT(bus)) {
+		ret = -ENODEV;
+		goto out;
+	}
+
+	/* Put the phys addr in uncached space */
+	paddr = SN_PCIBUS_BUSSOFT(bus)->bs_legacy_io | __IA64_UNCACHED_OFFSET;
+	paddr += port;
+	addr = (unsigned long *)paddr;
+
+	switch (size) {
+	case 1:
+		*(volatile u8 *)(addr) = (u8)(val);
+		break;
+	case 2:
+		*(volatile u16 *)(addr) = (u16)(val);
+		break;
+	case 4:
+		*(volatile u32 *)(addr) = (u32)(val);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+ out:
+	return ret;
+}
diff --git a/arch/ia64/sn/pci/pcibr/Makefile b/arch/ia64/sn/pci/pcibr/Makefile
new file mode 100644
index 00000000000..1850c4a94c4
--- /dev/null
+++ b/arch/ia64/sn/pci/pcibr/Makefile
@@ -0,0 +1,11 @@
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 2002-2004 Silicon Graphics, Inc.  All Rights Reserved.
+#
+# Makefile for the sn2 io routines.
+
+obj-y				+=  pcibr_dma.o pcibr_reg.o \
+				    pcibr_ate.o pcibr_provider.o
diff --git a/arch/ia64/sn/pci/pcibr/pcibr_ate.c b/arch/ia64/sn/pci/pcibr/pcibr_ate.c
new file mode 100644
index 00000000000..9d6854666f9
--- /dev/null
+++ b/arch/ia64/sn/pci/pcibr/pcibr_ate.c
@@ -0,0 +1,188 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001-2004 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#include <linux/types.h>
+#include <asm/sn/sn_sal.h>
+#include "pci/pcibus_provider_defs.h"
+#include "pci/pcidev.h"
+#include "pci/pcibr_provider.h"
+
+int pcibr_invalidate_ate = 0;	/* by default don't invalidate ATE on free */
+
+/*
+ * mark_ate: Mark the ate as either free or inuse.
+ */
+static void mark_ate(struct ate_resource *ate_resource, int start, int number,
+		     uint64_t value)
+{
+
+	uint64_t *ate = ate_resource->ate;
+	int index;
+	int length = 0;
+
+	for (index = start; length < number; index++, length++)
+		ate[index] = value;
+
+}
+
+/*
+ * find_free_ate:  Find the first free ate index starting from the given
+ *		   index for the desired consequtive count.
+ */
+static int find_free_ate(struct ate_resource *ate_resource, int start,
+			 int count)
+{
+
+	uint64_t *ate = ate_resource->ate;
+	int index;
+	int start_free;
+
+	for (index = start; index < ate_resource->num_ate;) {
+		if (!ate[index]) {
+			int i;
+			int free;
+			free = 0;
+			start_free = index;	/* Found start free ate */
+			for (i = start_free; i < ate_resource->num_ate; i++) {
+				if (!ate[i]) {	/* This is free */
+					if (++free == count)
+						return start_free;
+				} else {
+					index = i + 1;
+					break;
+				}
+			}
+		} else
+			index++;	/* Try next ate */
+	}
+
+	return -1;
+}
+
+/*
+ * free_ate_resource:  Free the requested number of ATEs.
+ */
+static inline void free_ate_resource(struct ate_resource *ate_resource,
+				     int start)
+{
+
+	mark_ate(ate_resource, start, ate_resource->ate[start], 0);
+	if ((ate_resource->lowest_free_index > start) ||
+	    (ate_resource->lowest_free_index < 0))
+		ate_resource->lowest_free_index = start;
+
+}
+
+/*
+ * alloc_ate_resource:  Allocate the requested number of ATEs.
+ */
+static inline int alloc_ate_resource(struct ate_resource *ate_resource,
+				     int ate_needed)
+{
+
+	int start_index;
+
+	/*
+	 * Check for ate exhaustion.
+	 */
+	if (ate_resource->lowest_free_index < 0)
+		return -1;
+
+	/*
+	 * Find the required number of free consequtive ates.
+	 */
+	start_index =
+	    find_free_ate(ate_resource, ate_resource->lowest_free_index,
+			  ate_needed);
+	if (start_index >= 0)
+		mark_ate(ate_resource, start_index, ate_needed, ate_needed);
+
+	ate_resource->lowest_free_index =
+	    find_free_ate(ate_resource, ate_resource->lowest_free_index, 1);
+
+	return start_index;
+}
+
+/*
+ * Allocate "count" contiguous Bridge Address Translation Entries
+ * on the specified bridge to be used for PCI to XTALK mappings.
+ * Indices in rm map range from 1..num_entries.  Indicies returned
+ * to caller range from 0..num_entries-1.
+ *
+ * Return the start index on success, -1 on failure.
+ */
+int pcibr_ate_alloc(struct pcibus_info *pcibus_info, int count)
+{
+	int status = 0;
+	uint64_t flag;
+
+	flag = pcibr_lock(pcibus_info);
+	status = alloc_ate_resource(&pcibus_info->pbi_int_ate_resource, count);
+
+	if (status < 0) {
+		/* Failed to allocate */
+		pcibr_unlock(pcibus_info, flag);
+		return -1;
+	}
+
+	pcibr_unlock(pcibus_info, flag);
+
+	return status;
+}
+
+/*
+ * Setup an Address Translation Entry as specified.  Use either the Bridge
+ * internal maps or the external map RAM, as appropriate.
+ */
+static inline uint64_t *pcibr_ate_addr(struct pcibus_info *pcibus_info,
+				       int ate_index)
+{
+	if (ate_index < pcibus_info->pbi_int_ate_size) {
+		return pcireg_int_ate_addr(pcibus_info, ate_index);
+	}
+	panic("pcibr_ate_addr: invalid ate_index 0x%x", ate_index);
+}
+
+/*
+ * Update the ate.
+ */
+void inline
+ate_write(struct pcibus_info *pcibus_info, int ate_index, int count,
+	  volatile uint64_t ate)
+{
+	while (count-- > 0) {
+		if (ate_index < pcibus_info->pbi_int_ate_size) {
+			pcireg_int_ate_set(pcibus_info, ate_index, ate);
+		} else {
+			panic("ate_write: invalid ate_index 0x%x", ate_index);
+		}
+		ate_index++;
+		ate += IOPGSIZE;
+	}
+
+	pcireg_tflush_get(pcibus_info);	/* wait until Bridge PIO complete */
+}
+
+void pcibr_ate_free(struct pcibus_info *pcibus_info, int index)
+{
+
+	volatile uint64_t ate;
+	int count;
+	uint64_t flags;
+
+	if (pcibr_invalidate_ate) {
+		/* For debugging purposes, clear the valid bit in the ATE */
+		ate = *pcibr_ate_addr(pcibus_info, index);
+		count = pcibus_info->pbi_int_ate_resource.ate[index];
+		ate_write(pcibus_info, index, count, (ate & ~PCI32_ATE_V));
+	}
+
+	flags = pcibr_lock(pcibus_info);
+	free_ate_resource(&pcibus_info->pbi_int_ate_resource, index);
+	pcibr_unlock(pcibus_info, flags);
+}
diff --git a/arch/ia64/sn/pci/pcibr/pcibr_dma.c b/arch/ia64/sn/pci/pcibr/pcibr_dma.c
new file mode 100644
index 00000000000..b1d66ac065c
--- /dev/null
+++ b/arch/ia64/sn/pci/pcibr/pcibr_dma.c
@@ -0,0 +1,379 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001-2004 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <asm/sn/sn_sal.h>
+#include <asm/sn/geo.h>
+#include "xtalk/xwidgetdev.h"
+#include "xtalk/hubdev.h"
+#include "pci/pcibus_provider_defs.h"
+#include "pci/pcidev.h"
+#include "pci/tiocp.h"
+#include "pci/pic.h"
+#include "pci/pcibr_provider.h"
+#include "pci/tiocp.h"
+#include "tio.h"
+#include <asm/sn/addrs.h>
+
+extern int sn_ioif_inited;
+
+/* =====================================================================
+ *    DMA MANAGEMENT
+ *
+ *      The Bridge ASIC provides three methods of doing DMA: via a "direct map"
+ *      register available in 32-bit PCI space (which selects a contiguous 2G
+ *	address space on some other widget), via "direct" addressing via 64-bit
+ *      PCI space (all destination information comes from the PCI address,
+ *      including transfer attributes), and via a "mapped" region that allows 
+ *      a bunch of different small mappings to be established with the PMU.
+ *
+ *      For efficiency, we most prefer to use the 32bit direct mapping facility,
+ *      since it requires no resource allocations. The advantage of using the
+ *      PMU over the 64-bit direct is that single-cycle PCI addressing can be
+ *      used; the advantage of using 64-bit direct over PMU addressing is that
+ *      we do not have to allocate entries in the PMU.
+ */
+
+static uint64_t
+pcibr_dmamap_ate32(struct pcidev_info *info,
+		   uint64_t paddr, size_t req_size, uint64_t flags)
+{
+
+	struct pcidev_info *pcidev_info = info->pdi_host_pcidev_info;
+	struct pcibus_info *pcibus_info = (struct pcibus_info *)pcidev_info->
+	    pdi_pcibus_info;
+	uint8_t internal_device = (PCI_SLOT(pcidev_info->pdi_host_pcidev_info->
+					    pdi_linux_pcidev->devfn)) - 1;
+	int ate_count;
+	int ate_index;
+	uint64_t ate_flags = flags | PCI32_ATE_V;
+	uint64_t ate;
+	uint64_t pci_addr;
+	uint64_t xio_addr;
+	uint64_t offset;
+
+	/* PIC in PCI-X mode does not supports 32bit PageMap mode */
+	if (IS_PIC_SOFT(pcibus_info) && IS_PCIX(pcibus_info)) {
+		return 0;
+	}
+
+	/* Calculate the number of ATEs needed. */
+	if (!(MINIMAL_ATE_FLAG(paddr, req_size))) {
+		ate_count = IOPG((IOPGSIZE - 1)	/* worst case start offset */
+				 +req_size	/* max mapping bytes */
+				 - 1) + 1;	/* round UP */
+	} else {		/* assume requested target is page aligned */
+		ate_count = IOPG(req_size	/* max mapping bytes */
+				 - 1) + 1;	/* round UP */
+	}
+
+	/* Get the number of ATEs required. */
+	ate_index = pcibr_ate_alloc(pcibus_info, ate_count);
+	if (ate_index < 0)
+		return 0;
+
+	/* In PCI-X mode, Prefetch not supported */
+	if (IS_PCIX(pcibus_info))
+		ate_flags &= ~(PCI32_ATE_PREF);
+
+	xio_addr =
+	    IS_PIC_SOFT(pcibus_info) ? PHYS_TO_DMA(paddr) :
+	    PHYS_TO_TIODMA(paddr);
+	offset = IOPGOFF(xio_addr);
+	ate = ate_flags | (xio_addr - offset);
+
+	/* If PIC, put the targetid in the ATE */
+	if (IS_PIC_SOFT(pcibus_info)) {
+		ate |= (pcibus_info->pbi_hub_xid << PIC_ATE_TARGETID_SHFT);
+	}
+	ate_write(pcibus_info, ate_index, ate_count, ate);
+
+	/*
+	 * Set up the DMA mapped Address.
+	 */
+	pci_addr = PCI32_MAPPED_BASE + offset + IOPGSIZE * ate_index;
+
+	/*
+	 * If swap was set in device in pcibr_endian_set()
+	 * we need to turn swapping on.
+	 */
+	if (pcibus_info->pbi_devreg[internal_device] & PCIBR_DEV_SWAP_DIR)
+		ATE_SWAP_ON(pci_addr);
+
+	return pci_addr;
+}
+
+static uint64_t
+pcibr_dmatrans_direct64(struct pcidev_info * info, uint64_t paddr,
+			uint64_t dma_attributes)
+{
+	struct pcibus_info *pcibus_info = (struct pcibus_info *)
+	    ((info->pdi_host_pcidev_info)->pdi_pcibus_info);
+	uint64_t pci_addr;
+
+	/* Translate to Crosstalk View of Physical Address */
+	pci_addr = (IS_PIC_SOFT(pcibus_info) ? PHYS_TO_DMA(paddr) :
+		    PHYS_TO_TIODMA(paddr)) | dma_attributes;
+
+	/* Handle Bus mode */
+	if (IS_PCIX(pcibus_info))
+		pci_addr &= ~PCI64_ATTR_PREF;
+
+	/* Handle Bridge Chipset differences */
+	if (IS_PIC_SOFT(pcibus_info)) {
+		pci_addr |=
+		    ((uint64_t) pcibus_info->
+		     pbi_hub_xid << PIC_PCI64_ATTR_TARG_SHFT);
+	} else
+		pci_addr |= TIOCP_PCI64_CMDTYPE_MEM;
+
+	/* If PCI mode, func zero uses VCHAN0, every other func uses VCHAN1 */
+	if (!IS_PCIX(pcibus_info) && PCI_FUNC(info->pdi_linux_pcidev->devfn))
+		pci_addr |= PCI64_ATTR_VIRTUAL;
+
+	return pci_addr;
+
+}
+
+static uint64_t
+pcibr_dmatrans_direct32(struct pcidev_info * info,
+			uint64_t paddr, size_t req_size, uint64_t flags)
+{
+
+	struct pcidev_info *pcidev_info = info->pdi_host_pcidev_info;
+	struct pcibus_info *pcibus_info = (struct pcibus_info *)pcidev_info->
+	    pdi_pcibus_info;
+	uint64_t xio_addr;
+
+	uint64_t xio_base;
+	uint64_t offset;
+	uint64_t endoff;
+
+	if (IS_PCIX(pcibus_info)) {
+		return 0;
+	}
+
+	xio_addr = IS_PIC_SOFT(pcibus_info) ? PHYS_TO_DMA(paddr) :
+	    PHYS_TO_TIODMA(paddr);
+
+	xio_base = pcibus_info->pbi_dir_xbase;
+	offset = xio_addr - xio_base;
+	endoff = req_size + offset;
+	if ((req_size > (1ULL << 31)) ||	/* Too Big */
+	    (xio_addr < xio_base) ||	/* Out of range for mappings */
+	    (endoff > (1ULL << 31))) {	/* Too Big */
+		return 0;
+	}
+
+	return PCI32_DIRECT_BASE | offset;
+
+}
+
+/*
+ * Wrapper routine for free'ing DMA maps
+ * DMA mappings for Direct 64 and 32 do not have any DMA maps.
+ */
+void
+pcibr_dma_unmap(struct pcidev_info *pcidev_info, dma_addr_t dma_handle,
+		int direction)
+{
+	struct pcibus_info *pcibus_info = (struct pcibus_info *)pcidev_info->
+	    pdi_pcibus_info;
+
+	if (IS_PCI32_MAPPED(dma_handle)) {
+		int ate_index;
+
+		ate_index =
+		    IOPG((ATE_SWAP_OFF(dma_handle) - PCI32_MAPPED_BASE));
+		pcibr_ate_free(pcibus_info, ate_index);
+	}
+}
+
+/*
+ * On SN systems there is a race condition between a PIO read response and 
+ * DMA's.  In rare cases, the read response may beat the DMA, causing the
+ * driver to think that data in memory is complete and meaningful.  This code
+ * eliminates that race.  This routine is called by the PIO read routines
+ * after doing the read.  For PIC this routine then forces a fake interrupt
+ * on another line, which is logically associated with the slot that the PIO
+ * is addressed to.  It then spins while watching the memory location that
+ * the interrupt is targetted to.  When the interrupt response arrives, we 
+ * are sure that the DMA has landed in memory and it is safe for the driver
+ * to proceed.	For TIOCP use the Device(x) Write Request Buffer Flush 
+ * Bridge register since it ensures the data has entered the coherence domain,
+ * unlike the PIC Device(x) Write Request Buffer Flush register.
+ */
+
+void sn_dma_flush(uint64_t addr)
+{
+	nasid_t nasid;
+	int is_tio;
+	int wid_num;
+	int i, j;
+	int bwin;
+	uint64_t flags;
+	struct hubdev_info *hubinfo;
+	volatile struct sn_flush_device_list *p;
+	struct sn_flush_nasid_entry *flush_nasid_list;
+
+	if (!sn_ioif_inited)
+		return;
+
+	nasid = NASID_GET(addr);
+	if (-1 == nasid_to_cnodeid(nasid))
+		return;
+
+	hubinfo = (NODEPDA(nasid_to_cnodeid(nasid)))->pdinfo;
+
+	if (!hubinfo) {
+		BUG();
+	}
+	is_tio = (nasid & 1);
+	if (is_tio) {
+		wid_num = TIO_SWIN_WIDGETNUM(addr);
+		bwin = TIO_BWIN_WINDOWNUM(addr);
+	} else {
+		wid_num = SWIN_WIDGETNUM(addr);
+		bwin = BWIN_WINDOWNUM(addr);
+	}
+
+	flush_nasid_list = &hubinfo->hdi_flush_nasid_list;
+	if (flush_nasid_list->widget_p == NULL)
+		return;
+	if (bwin > 0) {
+		uint64_t itte = flush_nasid_list->iio_itte[bwin];
+
+		if (is_tio) {
+			wid_num = (itte >> TIO_ITTE_WIDGET_SHIFT) &
+			    TIO_ITTE_WIDGET_MASK;
+		} else {
+			wid_num = (itte >> IIO_ITTE_WIDGET_SHIFT) &
+			    IIO_ITTE_WIDGET_MASK;
+		}
+	}
+	if (flush_nasid_list->widget_p == NULL)
+		return;
+	if (flush_nasid_list->widget_p[wid_num] == NULL)
+		return;
+	p = &flush_nasid_list->widget_p[wid_num][0];
+
+	/* find a matching BAR */
+	for (i = 0; i < DEV_PER_WIDGET; i++) {
+		for (j = 0; j < PCI_ROM_RESOURCE; j++) {
+			if (p->sfdl_bar_list[j].start == 0)
+				break;
+			if (addr >= p->sfdl_bar_list[j].start
+			    && addr <= p->sfdl_bar_list[j].end)
+				break;
+		}
+		if (j < PCI_ROM_RESOURCE && p->sfdl_bar_list[j].start != 0)
+			break;
+		p++;
+	}
+
+	/* if no matching BAR, return without doing anything. */
+	if (i == DEV_PER_WIDGET)
+		return;
+
+	/*
+	 * For TIOCP use the Device(x) Write Request Buffer Flush Bridge
+	 * register since it ensures the data has entered the coherence
+	 * domain, unlike PIC
+	 */
+	if (is_tio) {
+		uint32_t tio_id = REMOTE_HUB_L(nasid, TIO_NODE_ID);
+		uint32_t revnum = XWIDGET_PART_REV_NUM(tio_id);
+
+		/* TIOCP BRINGUP WAR (PV907516): Don't write buffer flush reg */
+		if ((1 << XWIDGET_PART_REV_NUM_REV(revnum)) & PV907516) {
+			return;
+		} else {
+			pcireg_wrb_flush_get(p->sfdl_pcibus_info,
+					     (p->sfdl_slot - 1));
+		}
+	} else {
+		spin_lock_irqsave(&((struct sn_flush_device_list *)p)->
+				  sfdl_flush_lock, flags);
+
+		p->sfdl_flush_value = 0;
+
+		/* force an interrupt. */
+		*(volatile uint32_t *)(p->sfdl_force_int_addr) = 1;
+
+		/* wait for the interrupt to come back. */
+		while (*(p->sfdl_flush_addr) != 0x10f) ;
+
+		/* okay, everything is synched up. */
+		spin_unlock_irqrestore((spinlock_t *)&p->sfdl_flush_lock, flags);
+	}
+	return;
+}
+
+/*
+ * Wrapper DMA interface.  Called from pci_dma.c routines.
+ */
+
+uint64_t
+pcibr_dma_map(struct pcidev_info * pcidev_info, unsigned long phys_addr,
+	      size_t size, unsigned int flags)
+{
+	dma_addr_t dma_handle;
+	struct pci_dev *pcidev = pcidev_info->pdi_linux_pcidev;
+
+	if (flags & SN_PCIDMA_CONSISTENT) {
+		/* sn_pci_alloc_consistent interfaces */
+		if (pcidev->dev.coherent_dma_mask == ~0UL) {
+			dma_handle =
+			    pcibr_dmatrans_direct64(pcidev_info, phys_addr,
+						    PCI64_ATTR_BAR);
+		} else {
+			dma_handle =
+			    (dma_addr_t) pcibr_dmamap_ate32(pcidev_info,
+							    phys_addr, size,
+							    PCI32_ATE_BAR);
+		}
+	} else {
+		/* map_sg/map_single interfaces */
+
+		/* SN cannot support DMA addresses smaller than 32 bits. */
+		if (pcidev->dma_mask < 0x7fffffff) {
+			return 0;
+		}
+
+		if (pcidev->dma_mask == ~0UL) {
+			/*
+			 * Handle the most common case: 64 bit cards.  This
+			 * call should always succeed.
+			 */
+
+			dma_handle =
+			    pcibr_dmatrans_direct64(pcidev_info, phys_addr,
+						    PCI64_ATTR_PREF);
+		} else {
+			/* Handle 32-63 bit cards via direct mapping */
+			dma_handle =
+			    pcibr_dmatrans_direct32(pcidev_info, phys_addr,
+						    size, 0);
+			if (!dma_handle) {
+				/*
+				 * It is a 32 bit card and we cannot do direct mapping,
+				 * so we use an ATE.
+				 */
+
+				dma_handle =
+				    pcibr_dmamap_ate32(pcidev_info, phys_addr,
+						       size, PCI32_ATE_PREF);
+			}
+		}
+	}
+
+	return dma_handle;
+}
+
+EXPORT_SYMBOL(sn_dma_flush);
diff --git a/arch/ia64/sn/pci/pcibr/pcibr_provider.c b/arch/ia64/sn/pci/pcibr/pcibr_provider.c
new file mode 100644
index 00000000000..92bd278cf7f
--- /dev/null
+++ b/arch/ia64/sn/pci/pcibr/pcibr_provider.c
@@ -0,0 +1,170 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001-2004 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <asm/sn/sn_sal.h>
+#include "xtalk/xwidgetdev.h"
+#include <asm/sn/geo.h>
+#include "xtalk/hubdev.h"
+#include "pci/pcibus_provider_defs.h"
+#include "pci/pcidev.h"
+#include "pci/pcibr_provider.h"
+#include <asm/sn/addrs.h>
+
+
+static int sal_pcibr_error_interrupt(struct pcibus_info *soft)
+{
+	struct ia64_sal_retval ret_stuff;
+	uint64_t busnum;
+	int segment;
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+
+	segment = 0;
+	busnum = soft->pbi_buscommon.bs_persist_busnum;
+	SAL_CALL_NOLOCK(ret_stuff,
+			(u64) SN_SAL_IOIF_ERROR_INTERRUPT,
+			(u64) segment, (u64) busnum, 0, 0, 0, 0, 0);
+
+	return (int)ret_stuff.v0;
+}
+
+/* 
+ * PCI Bridge Error interrupt handler.  Gets invoked whenever a PCI 
+ * bridge sends an error interrupt.
+ */
+static irqreturn_t
+pcibr_error_intr_handler(int irq, void *arg, struct pt_regs *regs)
+{
+	struct pcibus_info *soft = (struct pcibus_info *)arg;
+
+	if (sal_pcibr_error_interrupt(soft) < 0) {
+		panic("pcibr_error_intr_handler(): Fatal Bridge Error");
+	}
+	return IRQ_HANDLED;
+}
+
+void *
+pcibr_bus_fixup(struct pcibus_bussoft *prom_bussoft)
+{
+	int nasid, cnode, j;
+	struct hubdev_info *hubdev_info;
+	struct pcibus_info *soft;
+	struct sn_flush_device_list *sn_flush_device_list;
+
+	if (! IS_PCI_BRIDGE_ASIC(prom_bussoft->bs_asic_type)) {
+		return NULL;
+	}
+
+	/*
+	 * Allocate kernel bus soft and copy from prom.
+	 */
+
+	soft = kmalloc(sizeof(struct pcibus_info), GFP_KERNEL);
+	if (!soft) {
+		return NULL;
+	}
+
+	memcpy(soft, prom_bussoft, sizeof(struct pcibus_info));
+	soft->pbi_buscommon.bs_base =
+	    (((u64) soft->pbi_buscommon.
+	      bs_base << 4) >> 4) | __IA64_UNCACHED_OFFSET;
+
+	spin_lock_init(&soft->pbi_lock);
+
+	/*
+	 * register the bridge's error interrupt handler
+	 */
+	if (request_irq(SGI_PCIBR_ERROR, (void *)pcibr_error_intr_handler,
+			SA_SHIRQ, "PCIBR error", (void *)(soft))) {
+		printk(KERN_WARNING
+		       "pcibr cannot allocate interrupt for error handler\n");
+	}
+
+	/* 
+	 * Update the Bridge with the "kernel" pagesize 
+	 */
+	if (PAGE_SIZE < 16384) {
+		pcireg_control_bit_clr(soft, PCIBR_CTRL_PAGE_SIZE);
+	} else {
+		pcireg_control_bit_set(soft, PCIBR_CTRL_PAGE_SIZE);
+	}
+
+	nasid = NASID_GET(soft->pbi_buscommon.bs_base);
+	cnode = nasid_to_cnodeid(nasid);
+	hubdev_info = (struct hubdev_info *)(NODEPDA(cnode)->pdinfo);
+
+	if (hubdev_info->hdi_flush_nasid_list.widget_p) {
+		sn_flush_device_list = hubdev_info->hdi_flush_nasid_list.
+		    widget_p[(int)soft->pbi_buscommon.bs_xid];
+		if (sn_flush_device_list) {
+			for (j = 0; j < DEV_PER_WIDGET;
+			     j++, sn_flush_device_list++) {
+				if (sn_flush_device_list->sfdl_slot == -1)
+					continue;
+				if (sn_flush_device_list->
+				    sfdl_persistent_busnum ==
+				    soft->pbi_buscommon.bs_persist_busnum)
+					sn_flush_device_list->sfdl_pcibus_info =
+					    soft;
+			}
+		}
+	}
+
+	/* Setup the PMU ATE map */
+	soft->pbi_int_ate_resource.lowest_free_index = 0;
+	soft->pbi_int_ate_resource.ate =
+	    kmalloc(soft->pbi_int_ate_size * sizeof(uint64_t), GFP_KERNEL);
+	memset(soft->pbi_int_ate_resource.ate, 0,
+ 	       (soft->pbi_int_ate_size * sizeof(uint64_t)));
+
+	return soft;
+}
+
+void pcibr_force_interrupt(struct sn_irq_info *sn_irq_info)
+{
+	struct pcidev_info *pcidev_info;
+	struct pcibus_info *pcibus_info;
+	int bit = sn_irq_info->irq_int_bit;
+
+	pcidev_info = (struct pcidev_info *)sn_irq_info->irq_pciioinfo;
+	if (pcidev_info) {
+		pcibus_info =
+		    (struct pcibus_info *)pcidev_info->pdi_host_pcidev_info->
+		    pdi_pcibus_info;
+		pcireg_force_intr_set(pcibus_info, bit);
+	}
+}
+
+void pcibr_change_devices_irq(struct sn_irq_info *sn_irq_info)
+{
+	struct pcidev_info *pcidev_info;
+	struct pcibus_info *pcibus_info;
+	int bit = sn_irq_info->irq_int_bit;
+	uint64_t xtalk_addr = sn_irq_info->irq_xtalkaddr;
+
+	pcidev_info = (struct pcidev_info *)sn_irq_info->irq_pciioinfo;
+	if (pcidev_info) {
+		pcibus_info =
+		    (struct pcibus_info *)pcidev_info->pdi_host_pcidev_info->
+		    pdi_pcibus_info;
+
+		/* Disable the device's IRQ   */
+		pcireg_intr_enable_bit_clr(pcibus_info, bit);
+
+		/* Change the device's IRQ    */
+		pcireg_intr_addr_addr_set(pcibus_info, bit, xtalk_addr);
+
+		/* Re-enable the device's IRQ */
+		pcireg_intr_enable_bit_set(pcibus_info, bit);
+
+		pcibr_force_interrupt(sn_irq_info);
+	}
+}
diff --git a/arch/ia64/sn/pci/pcibr/pcibr_reg.c b/arch/ia64/sn/pci/pcibr/pcibr_reg.c
new file mode 100644
index 00000000000..74a74a7d2a1
--- /dev/null
+++ b/arch/ia64/sn/pci/pcibr/pcibr_reg.c
@@ -0,0 +1,282 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2004 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include "pci/pcibus_provider_defs.h"
+#include "pci/pcidev.h"
+#include "pci/tiocp.h"
+#include "pci/pic.h"
+#include "pci/pcibr_provider.h"
+
+union br_ptr {
+	struct tiocp tio;
+	struct pic pic;
+};
+
+/*
+ * Control Register Access -- Read/Write                            0000_0020
+ */
+void pcireg_control_bit_clr(struct pcibus_info *pcibus_info, uint64_t bits)
+{
+	union br_ptr *ptr = (union br_ptr *)pcibus_info->pbi_buscommon.bs_base;
+
+	if (pcibus_info) {
+		switch (pcibus_info->pbi_bridge_type) {
+		case PCIBR_BRIDGETYPE_TIOCP:
+			ptr->tio.cp_control &= ~bits;
+			break;
+		case PCIBR_BRIDGETYPE_PIC:
+			ptr->pic.p_wid_control &= ~bits;
+			break;
+		default:
+			panic
+			    ("pcireg_control_bit_clr: unknown bridgetype bridge 0x%p",
+			     (void *)ptr);
+		}
+	}
+}
+
+void pcireg_control_bit_set(struct pcibus_info *pcibus_info, uint64_t bits)
+{
+	union br_ptr *ptr = (union br_ptr *)pcibus_info->pbi_buscommon.bs_base;
+
+	if (pcibus_info) {
+		switch (pcibus_info->pbi_bridge_type) {
+		case PCIBR_BRIDGETYPE_TIOCP:
+			ptr->tio.cp_control |= bits;
+			break;
+		case PCIBR_BRIDGETYPE_PIC:
+			ptr->pic.p_wid_control |= bits;
+			break;
+		default:
+			panic
+			    ("pcireg_control_bit_set: unknown bridgetype bridge 0x%p",
+			     (void *)ptr);
+		}
+	}
+}
+
+/*
+ * PCI/PCIX Target Flush Register Access -- Read Only		    0000_0050
+ */
+uint64_t pcireg_tflush_get(struct pcibus_info *pcibus_info)
+{
+	union br_ptr *ptr = (union br_ptr *)pcibus_info->pbi_buscommon.bs_base;
+	uint64_t ret = 0;
+
+	if (pcibus_info) {
+		switch (pcibus_info->pbi_bridge_type) {
+		case PCIBR_BRIDGETYPE_TIOCP:
+			ret = ptr->tio.cp_tflush;
+			break;
+		case PCIBR_BRIDGETYPE_PIC:
+			ret = ptr->pic.p_wid_tflush;
+			break;
+		default:
+			panic
+			    ("pcireg_tflush_get: unknown bridgetype bridge 0x%p",
+			     (void *)ptr);
+		}
+	}
+
+	/* Read of the Target Flush should always return zero */
+	if (ret != 0)
+		panic("pcireg_tflush_get:Target Flush failed\n");
+
+	return ret;
+}
+
+/*
+ * Interrupt Status Register Access -- Read Only		    0000_0100
+ */
+uint64_t pcireg_intr_status_get(struct pcibus_info * pcibus_info)
+{
+	union br_ptr *ptr = (union br_ptr *)pcibus_info->pbi_buscommon.bs_base;
+	uint64_t ret = 0;
+
+	if (pcibus_info) {
+		switch (pcibus_info->pbi_bridge_type) {
+		case PCIBR_BRIDGETYPE_TIOCP:
+			ret = ptr->tio.cp_int_status;
+			break;
+		case PCIBR_BRIDGETYPE_PIC:
+			ret = ptr->pic.p_int_status;
+			break;
+		default:
+			panic
+			    ("pcireg_intr_status_get: unknown bridgetype bridge 0x%p",
+			     (void *)ptr);
+		}
+	}
+	return ret;
+}
+
+/*
+ * Interrupt Enable Register Access -- Read/Write                   0000_0108
+ */
+void pcireg_intr_enable_bit_clr(struct pcibus_info *pcibus_info, uint64_t bits)
+{
+	union br_ptr *ptr = (union br_ptr *)pcibus_info->pbi_buscommon.bs_base;
+
+	if (pcibus_info) {
+		switch (pcibus_info->pbi_bridge_type) {
+		case PCIBR_BRIDGETYPE_TIOCP:
+			ptr->tio.cp_int_enable &= ~bits;
+			break;
+		case PCIBR_BRIDGETYPE_PIC:
+			ptr->pic.p_int_enable &= ~bits;
+			break;
+		default:
+			panic
+			    ("pcireg_intr_enable_bit_clr: unknown bridgetype bridge 0x%p",
+			     (void *)ptr);
+		}
+	}
+}
+
+void pcireg_intr_enable_bit_set(struct pcibus_info *pcibus_info, uint64_t bits)
+{
+	union br_ptr *ptr = (union br_ptr *)pcibus_info->pbi_buscommon.bs_base;
+
+	if (pcibus_info) {
+		switch (pcibus_info->pbi_bridge_type) {
+		case PCIBR_BRIDGETYPE_TIOCP:
+			ptr->tio.cp_int_enable |= bits;
+			break;
+		case PCIBR_BRIDGETYPE_PIC:
+			ptr->pic.p_int_enable |= bits;
+			break;
+		default:
+			panic
+			    ("pcireg_intr_enable_bit_set: unknown bridgetype bridge 0x%p",
+			     (void *)ptr);
+		}
+	}
+}
+
+/*
+ * Intr Host Address Register (int_addr) -- Read/Write  0000_0130 - 0000_0168
+ */
+void pcireg_intr_addr_addr_set(struct pcibus_info *pcibus_info, int int_n,
+			       uint64_t addr)
+{
+	union br_ptr *ptr = (union br_ptr *)pcibus_info->pbi_buscommon.bs_base;
+
+	if (pcibus_info) {
+		switch (pcibus_info->pbi_bridge_type) {
+		case PCIBR_BRIDGETYPE_TIOCP:
+			ptr->tio.cp_int_addr[int_n] &= ~TIOCP_HOST_INTR_ADDR;
+			ptr->tio.cp_int_addr[int_n] |=
+			    (addr & TIOCP_HOST_INTR_ADDR);
+			break;
+		case PCIBR_BRIDGETYPE_PIC:
+			ptr->pic.p_int_addr[int_n] &= ~PIC_HOST_INTR_ADDR;
+			ptr->pic.p_int_addr[int_n] |=
+			    (addr & PIC_HOST_INTR_ADDR);
+			break;
+		default:
+			panic
+			    ("pcireg_intr_addr_addr_get: unknown bridgetype bridge 0x%p",
+			     (void *)ptr);
+		}
+	}
+}
+
+/*
+ * Force Interrupt Register Access -- Write Only	0000_01C0 - 0000_01F8
+ */
+void pcireg_force_intr_set(struct pcibus_info *pcibus_info, int int_n)
+{
+	union br_ptr *ptr = (union br_ptr *)pcibus_info->pbi_buscommon.bs_base;
+
+	if (pcibus_info) {
+		switch (pcibus_info->pbi_bridge_type) {
+		case PCIBR_BRIDGETYPE_TIOCP:
+			ptr->tio.cp_force_pin[int_n] = 1;
+			break;
+		case PCIBR_BRIDGETYPE_PIC:
+			ptr->pic.p_force_pin[int_n] = 1;
+			break;
+		default:
+			panic
+			    ("pcireg_force_intr_set: unknown bridgetype bridge 0x%p",
+			     (void *)ptr);
+		}
+	}
+}
+
+/*
+ * Device(x) Write Buffer Flush Reg Access -- Read Only 0000_0240 - 0000_0258
+ */
+uint64_t pcireg_wrb_flush_get(struct pcibus_info *pcibus_info, int device)
+{
+	union br_ptr *ptr = (union br_ptr *)pcibus_info->pbi_buscommon.bs_base;
+	uint64_t ret = 0;
+
+	if (pcibus_info) {
+		switch (pcibus_info->pbi_bridge_type) {
+		case PCIBR_BRIDGETYPE_TIOCP:
+			ret = ptr->tio.cp_wr_req_buf[device];
+			break;
+		case PCIBR_BRIDGETYPE_PIC:
+			ret = ptr->pic.p_wr_req_buf[device];
+			break;
+		default:
+		      panic("pcireg_wrb_flush_get: unknown bridgetype bridge 0x%p", (void *)ptr);
+		}
+
+	}
+	/* Read of the Write Buffer Flush should always return zero */
+	return ret;
+}
+
+void pcireg_int_ate_set(struct pcibus_info *pcibus_info, int ate_index,
+			uint64_t val)
+{
+	union br_ptr *ptr = (union br_ptr *)pcibus_info->pbi_buscommon.bs_base;
+
+	if (pcibus_info) {
+		switch (pcibus_info->pbi_bridge_type) {
+		case PCIBR_BRIDGETYPE_TIOCP:
+			ptr->tio.cp_int_ate_ram[ate_index] = (uint64_t) val;
+			break;
+		case PCIBR_BRIDGETYPE_PIC:
+			ptr->pic.p_int_ate_ram[ate_index] = (uint64_t) val;
+			break;
+		default:
+			panic
+			    ("pcireg_int_ate_set: unknown bridgetype bridge 0x%p",
+			     (void *)ptr);
+		}
+	}
+}
+
+uint64_t *pcireg_int_ate_addr(struct pcibus_info *pcibus_info, int ate_index)
+{
+	union br_ptr *ptr = (union br_ptr *)pcibus_info->pbi_buscommon.bs_base;
+	uint64_t *ret = (uint64_t *) 0;
+
+	if (pcibus_info) {
+		switch (pcibus_info->pbi_bridge_type) {
+		case PCIBR_BRIDGETYPE_TIOCP:
+			ret =
+			    (uint64_t *) & (ptr->tio.cp_int_ate_ram[ate_index]);
+			break;
+		case PCIBR_BRIDGETYPE_PIC:
+			ret =
+			    (uint64_t *) & (ptr->pic.p_int_ate_ram[ate_index]);
+			break;
+		default:
+			panic
+			    ("pcireg_int_ate_addr: unknown bridgetype bridge 0x%p",
+			     (void *)ptr);
+		}
+	}
+	return ret;
+}