Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 287 insertions, 0 deletions

diff --git a/arch/m32r/kernel/head.S b/arch/m32r/kernel/head.S
new file mode 100644
index 00000000000..3e83173995c
--- /dev/null
+++ b/arch/m32r/kernel/head.S
@@ -0,0 +1,287 @@
+/*
+ *  linux/arch/m32r/kernel/head.S
+ *
+ *  M32R startup code.
+ *
+ *  Copyright (c) 2001, 2002  Hiroyuki Kondo, Hirokazu Takata,
+ *                            Hitoshi Yamamoto
+ */
+
+/* $Id$ */
+
+#include <linux/init.h>
+__INIT
+__INITDATA
+
+	.text
+#include <linux/config.h>
+#include <linux/linkage.h>
+#include <asm/segment.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/assembler.h>
+#include <asm/m32r.h>
+#include <asm/mmu_context.h>
+
+/*
+ * References to members of the boot_cpu_data structure.
+ */
+	.text
+	.global	start_kernel
+	.global __bss_start
+	.global _end
+ENTRY(stext)
+ENTRY(_stext)
+ENTRY(startup_32)
+	/* Setup up the stack pointer */
+	LDIMM	(r0, spi_stack_top)
+	LDIMM	(r1, spu_stack_top)
+	mvtc	r0, spi
+	mvtc	r1, spu
+
+	/* Initilalize PSW */
+	ldi	r0, #0x0000		/* use SPI, disable EI */
+	mvtc	r0, psw
+
+	/* Set up the stack pointer */
+	LDIMM	(r0, stack_start)
+	ld	r0, @r0
+	mvtc	r0, spi
+
+/*
+ * Clear BSS first so that there are no surprises...
+ */
+#ifdef CONFIG_ISA_DUAL_ISSUE
+
+	LDIMM	(r2, __bss_start)
+	LDIMM	(r3, _end)
+	sub	r3, r2		; BSS size in bytes
+	; R4 = BSS size in longwords (rounded down)
+	mv	r4, r3		    ||	ldi	r1, #0
+	srli	r4, #4		    ||	addi	r2, #-4
+	beqz	r4, .Lendloop1
+.Lloop1:
+#ifndef CONFIG_CHIP_M32310
+	; Touch memory for the no-write-allocating cache.
+	ld	r0, @(4,r2)
+#endif
+	st	r1, @+r2	    ||	addi	r4, #-1
+	st	r1, @+r2
+	st	r1, @+r2
+	st	r1, @+r2	    ||	cmpeq	r1, r4	; R4 = 0?
+	bnc	.Lloop1
+.Lendloop1:
+	and3	r4, r3, #15
+	addi	r2, #4
+	beqz	r4, .Lendloop2
+.Lloop2:
+	stb	r1, @r2		    ||	addi	r4, #-1
+	addi	r2, #1
+	bnez	r4, .Lloop2
+.Lendloop2:
+
+#else /* not CONFIG_ISA_DUAL_ISSUE */
+
+	LDIMM	(r2, __bss_start)
+	LDIMM	(r3, _end)
+	sub	r3, r2		; BSS size in bytes
+	mv	r4, r3
+	srli	r4, #2		; R4 = BSS size in longwords (rounded down)
+	ldi	r1, #0		; clear R1 for longwords store
+	addi	r2, #-4		; account for pre-inc store
+	beqz	r4, .Lendloop1	; any more to go?
+.Lloop1:
+	st	r1, @+r2	; yep, zero out another longword
+	addi	r4, #-1		; decrement count
+	bnez	r4, .Lloop1	; go do some more
+.Lendloop1:
+	and3	r4, r3, #3	; get no. of remaining BSS bytes to clear
+	addi	r2, #4		; account for pre-inc store
+	beqz	r4, .Lendloop2	; any more to go?
+.Lloop2:
+	stb	r1, @r2		; yep, zero out another byte
+	addi	r2, #1		; bump address
+	addi	r4, #-1		; decrement count
+	bnez	r4, .Lloop2	; go do some more
+.Lendloop2:
+
+#endif /* not CONFIG_ISA_DUAL_ISSUE */
+
+#if 0  /* M32R_FIXME */
+/*
+ * Copy data segment from ROM to RAM.
+ */
+	.global ROM_D, TOP_DATA, END_DATA
+
+	LDIMM	(r1, ROM_D)
+	LDIMM	(r2, TOP_DATA)
+	LDIMM	(r3, END_DATA)
+	addi	r2, #-4
+	addi	r3, #-4
+loop1:
+	ld	r0, @r1+
+	st	r0, @+r2
+	cmp	r2, r3
+	bc	loop1
+#endif /* 0 */
+
+/* Jump to kernel */
+	LDIMM	(r2, start_kernel)
+	jl	r2
+	.fillinsn
+1:
+	bra	1b		; main should never return here, but
+				; just in case, we know what happens.
+
+#ifdef CONFIG_SMP
+/*
+ * AP startup routine
+ */
+	.text
+	.global	eit_vector
+ENTRY(startup_AP)
+;; setup EVB
+	LDIMM  (r4, eit_vector)
+	mvtc   r4, cr5
+
+;; enable MMU
+	LDIMM	(r2, init_tlb)
+	jl	r2
+	seth  r4, #high(MATM)
+	or3   r4, r4, #low(MATM)
+	ldi   r5, #0x01
+	st    r5, @r4            ; Set MATM Reg(T bit ON)
+	ld    r6, @r4            ; MATM Check
+	LDIMM (r5, 1f)
+	jmp   r5                 ; enable MMU
+	nop
+	.fillinsn
+1:
+;; ISN check
+	ld    r6, @r4            ; MATM Check
+	seth  r4, #high(M32R_ICU_ISTS_ADDR)
+	or3   r4, r4, #low(M32R_ICU_ISTS_ADDR)
+	ld    r5, @r4		; Read ISTSi reg.
+	mv    r6, r5
+	slli  r5, #13  ; PIML check
+	srli  r5, #13  ;
+	seth  r4, #high(M32R_ICU_IMASK_ADDR)
+	or3   r4, r4, #low(M32R_ICU_IMASK_ADDR)
+	st    r5, @r4		; Write IMASKi reg.
+	slli  r6, #4   ; ISN check
+	srli  r6, #26  ;
+	seth  r4, #high(M32R_IRQ_IPI5)
+	or3   r4, r4, #low(M32R_IRQ_IPI5)
+	bne   r4, r6, 2f  ; if (ISN != CPU_BOOT_IPI) goto sleep;
+
+;; check cpu_bootout_map and set cpu_bootin_map
+	LDIMM (r4, cpu_bootout_map)
+	ld    r4, @r4
+	seth  r5, #high(M32R_CPUID_PORTL)
+	or3   r5, r5, #low(M32R_CPUID_PORTL)
+	ld    r5, @r5
+	ldi   r6, #1
+	sll   r6, r5
+	and   r4, r6
+	beqz  r4, 2f
+	LDIMM (r4, cpu_bootin_map)
+	ld    r5, @r4
+	or    r5, r6
+	st    r6, @r4
+
+;; clear PSW
+	ldi   r4, #0
+	mvtc  r4, psw
+
+;; setup SPI
+	LDIMM (r4, stack_start)
+	ld    r4, @r4
+	mvtc  r4, spi
+
+;; setup BPC (start_secondary)
+	LDIMM (r4, start_secondary)
+	mvtc  r4, bpc
+
+	rte  ; goto startup_secondary
+	nop
+	nop
+
+	.fillinsn
+2:
+	;; disable MMU
+	seth  r4, #high(MATM)
+	or3   r4, r4, #low(MATM)
+	ldi   r5, #0
+    	st    r5, @r4            ; Set MATM Reg(T bit OFF)
+    	ld    r6, @r4            ; MATM Check
+	LDIMM (r4, 3f)
+	seth  r5, #high(__PAGE_OFFSET)
+	or3   r5, r5, #low(__PAGE_OFFSET)
+	not   r5, r5
+	and   r4, r5
+	jmp   r4                 ; disable MMU
+	nop
+	.fillinsn
+3:
+	;; SLEEP and wait IPI
+	LDIMM (r4, AP_loop)
+	seth  r5, #high(__PAGE_OFFSET)
+	or3   r5, r5, #low(__PAGE_OFFSET)
+	not   r5, r5
+	and   r4, r5
+	jmp   r4
+	nop
+	nop
+#endif  /* CONFIG_SMP */
+
+ENTRY(stack_start)
+	.long	init_thread_union+8192
+	.long	__KERNEL_DS
+
+/*
+ * This is initialized to create a identity-mapping at 0-4M (for bootup
+ * purposes) and another mapping of the 0-4M area at virtual address
+ * PAGE_OFFSET.
+ */
+	.text
+
+#define  MOUNT_ROOT_RDONLY    1
+#define  RAMDISK_FLAGS        0		; 1024KB
+#define  ORIG_ROOT_DEV        0x0100	; /dev/ram0 (major:01, minor:00)
+#define  LOADER_TYPE          1		; (??? - non-zero value seems
+					; to be needed to boot from initrd)
+
+#define  COMMAND_LINE ""
+
+	.section	.empty_zero_page, "aw"
+ENTRY(empty_zero_page)
+	.long	MOUNT_ROOT_RDONLY		/* offset: +0x00 */
+	.long	RAMDISK_FLAGS
+	.long	ORIG_ROOT_DEV
+	.long	LOADER_TYPE
+	.long	0	/* INITRD_START */	/* +0x10 */
+	.long	0	/* INITRD_SIZE */
+	.long	0	/* CPU_CLOCK */
+	.long	0	/* BUS_CLOCK */
+	.long	0	/* TIMER_DIVIDE */	/* +0x20 */
+	.balign	256,0
+	.asciz	COMMAND_LINE
+  	.byte	0
+	.balign	4096,0,4096
+
+/*------------------------------------------------------------------------
+ * Stack area
+ */
+	.section .spi
+	ALIGN
+	.global spi_stack_top
+	.zero	1024
+spi_stack_top:
+
+	.section .spu
+	ALIGN
+	.global spu_stack_top
+	.zero	1024
+spu_stack_top:
+
+	.end