Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 494 insertions, 0 deletions

diff --git a/arch/m68k/fpsp040/kernel_ex.S b/arch/m68k/fpsp040/kernel_ex.S
new file mode 100644
index 00000000000..476b711967c
--- /dev/null
+++ b/arch/m68k/fpsp040/kernel_ex.S
@@ -0,0 +1,494 @@
+|
+|	kernel_ex.sa 3.3 12/19/90
+|
+| This file contains routines to force exception status in the
+| fpu for exceptional cases detected or reported within the
+| transcendental functions.  Typically, the t_xx routine will
+| set the appropriate bits in the USER_FPSR word on the stack.
+| The bits are tested in gen_except.sa to determine if an exceptional
+| situation needs to be created on return from the FPSP.
+|
+
+|		Copyright (C) Motorola, Inc. 1990
+|			All Rights Reserved
+|
+|	THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
+|	The copyright notice above does not evidence any
+|	actual or intended publication of such source code.
+
+KERNEL_EX:    |idnt    2,1 | Motorola 040 Floating Point Software Package
+
+	|section    8
+
+#include "fpsp.h"
+
+mns_inf:  .long 0xffff0000,0x00000000,0x00000000
+pls_inf:  .long 0x7fff0000,0x00000000,0x00000000
+nan:      .long 0x7fff0000,0xffffffff,0xffffffff
+huge:     .long 0x7ffe0000,0xffffffff,0xffffffff
+
+	|xref	  ovf_r_k
+	|xref	  unf_sub
+	|xref	  nrm_set
+
+	.global	  t_dz
+	.global      t_dz2
+	.global      t_operr
+	.global      t_unfl
+	.global      t_ovfl
+	.global      t_ovfl2
+	.global      t_inx2
+	.global	  t_frcinx
+	.global	  t_extdnrm
+	.global	  t_resdnrm
+	.global	  dst_nan
+	.global	  src_nan
+|
+|	DZ exception
+|
+|
+|	if dz trap disabled
+|		store properly signed inf (use sign of etemp) into fp0
+|		set FPSR exception status dz bit, condition code
+|		inf bit, and accrued dz bit
+|		return
+|		frestore the frame into the machine (done by unimp_hd)
+|
+|	else dz trap enabled
+|		set exception status bit & accrued bits in FPSR
+|		set flag to disable sto_res from corrupting fp register
+|		return
+|		frestore the frame into the machine (done by unimp_hd)
+|
+| t_dz2 is used by monadic functions such as flogn (from do_func).
+| t_dz is used by monadic functions such as satanh (from the
+| transcendental function).
+|
+t_dz2:
+	bsetb	#neg_bit,FPSR_CC(%a6)	|set neg bit in FPSR
+	fmovel	#0,%FPSR			|clr status bits (Z set)
+	btstb	#dz_bit,FPCR_ENABLE(%a6)	|test FPCR for dz exc enabled
+	bnes	dz_ena_end
+	bras	m_inf			|flogx always returns -inf
+t_dz:
+	fmovel	#0,%FPSR			|clr status bits (Z set)
+	btstb	#dz_bit,FPCR_ENABLE(%a6)	|test FPCR for dz exc enabled
+	bnes	dz_ena
+|
+|	dz disabled
+|
+	btstb	#sign_bit,ETEMP_EX(%a6)	|check sign for neg or pos
+	beqs	p_inf			|branch if pos sign
+
+m_inf:
+	fmovemx mns_inf,%fp0-%fp0		|load -inf
+	bsetb	#neg_bit,FPSR_CC(%a6)	|set neg bit in FPSR
+	bras	set_fpsr
+p_inf:
+	fmovemx pls_inf,%fp0-%fp0		|load +inf
+set_fpsr:
+	orl	#dzinf_mask,USER_FPSR(%a6) |set I,DZ,ADZ
+	rts
+|
+|	dz enabled
+|
+dz_ena:
+	btstb	#sign_bit,ETEMP_EX(%a6)	|check sign for neg or pos
+	beqs	dz_ena_end
+	bsetb	#neg_bit,FPSR_CC(%a6)	|set neg bit in FPSR
+dz_ena_end:
+	orl	#dzinf_mask,USER_FPSR(%a6) |set I,DZ,ADZ
+	st	STORE_FLG(%a6)
+	rts
+|
+|	OPERR exception
+|
+|	if (operr trap disabled)
+|		set FPSR exception status operr bit, condition code
+|		nan bit; Store default NAN into fp0
+|		frestore the frame into the machine (done by unimp_hd)
+|
+|	else (operr trap enabled)
+|		set FPSR exception status operr bit, accrued operr bit
+|		set flag to disable sto_res from corrupting fp register
+|		frestore the frame into the machine (done by unimp_hd)
+|
+t_operr:
+	orl	#opnan_mask,USER_FPSR(%a6) |set NaN, OPERR, AIOP
+
+	btstb	#operr_bit,FPCR_ENABLE(%a6) |test FPCR for operr enabled
+	bnes	op_ena
+
+	fmovemx nan,%fp0-%fp0		|load default nan
+	rts
+op_ena:
+	st	STORE_FLG(%a6)		|do not corrupt destination
+	rts
+
+|
+|	t_unfl --- UNFL exception
+|
+| This entry point is used by all routines requiring unfl, inex2,
+| aunfl, and ainex to be set on exit.
+|
+| On entry, a0 points to the exceptional operand.  The final exceptional
+| operand is built in FP_SCR1 and only the sign from the original operand
+| is used.
+|
+t_unfl:
+	clrl	FP_SCR1(%a6)		|set exceptional operand to zero
+	clrl	FP_SCR1+4(%a6)
+	clrl	FP_SCR1+8(%a6)
+	tstb	(%a0)			|extract sign from caller's exop
+	bpls	unfl_signok
+	bset	#sign_bit,FP_SCR1(%a6)
+unfl_signok:
+	leal	FP_SCR1(%a6),%a0
+	orl	#unfinx_mask,USER_FPSR(%a6)
+|					;set UNFL, INEX2, AUNFL, AINEX
+unfl_con:
+	btstb	#unfl_bit,FPCR_ENABLE(%a6)
+	beqs	unfl_dis
+
+unfl_ena:
+	bfclr	STAG(%a6){#5:#3}		|clear wbtm66,wbtm1,wbtm0
+	bsetb	#wbtemp15_bit,WB_BYTE(%a6) |set wbtemp15
+	bsetb	#sticky_bit,STICKY(%a6)	|set sticky bit
+
+	bclrb	#E1,E_BYTE(%a6)
+
+unfl_dis:
+	bfextu	FPCR_MODE(%a6){#0:#2},%d0	|get round precision
+
+	bclrb	#sign_bit,LOCAL_EX(%a0)
+	sne	LOCAL_SGN(%a0)		|convert to internal ext format
+
+	bsr	unf_sub			|returns IEEE result at a0
+|					;and sets FPSR_CC accordingly
+
+	bfclr	LOCAL_SGN(%a0){#0:#8}	|convert back to IEEE ext format
+	beqs	unfl_fin
+
+	bsetb	#sign_bit,LOCAL_EX(%a0)
+	bsetb	#sign_bit,FP_SCR1(%a6)	|set sign bit of exc operand
+
+unfl_fin:
+	fmovemx (%a0),%fp0-%fp0		|store result in fp0
+	rts
+
+
+|
+|	t_ovfl2 --- OVFL exception (without inex2 returned)
+|
+| This entry is used by scale to force catastrophic overflow.  The
+| ovfl, aovfl, and ainex bits are set, but not the inex2 bit.
+|
+t_ovfl2:
+	orl	#ovfl_inx_mask,USER_FPSR(%a6)
+	movel	ETEMP(%a6),FP_SCR1(%a6)
+	movel	ETEMP_HI(%a6),FP_SCR1+4(%a6)
+	movel	ETEMP_LO(%a6),FP_SCR1+8(%a6)
+|
+| Check for single or double round precision.  If single, check if
+| the lower 40 bits of ETEMP are zero; if not, set inex2.  If double,
+| check if the lower 21 bits are zero; if not, set inex2.
+|
+	moveb	FPCR_MODE(%a6),%d0
+	andib	#0xc0,%d0
+	beq	t_work		|if extended, finish ovfl processing
+	cmpib	#0x40,%d0		|test for single
+	bnes	t_dbl
+t_sgl:
+	tstb	ETEMP_LO(%a6)
+	bnes	t_setinx2
+	movel	ETEMP_HI(%a6),%d0
+	andil	#0xff,%d0		|look at only lower 8 bits
+	bnes	t_setinx2
+	bra	t_work
+t_dbl:
+	movel	ETEMP_LO(%a6),%d0
+	andil	#0x7ff,%d0	|look at only lower 11 bits
+	beq	t_work
+t_setinx2:
+	orl	#inex2_mask,USER_FPSR(%a6)
+	bras	t_work
+|
+|	t_ovfl --- OVFL exception
+|
+|** Note: the exc operand is returned in ETEMP.
+|
+t_ovfl:
+	orl	#ovfinx_mask,USER_FPSR(%a6)
+t_work:
+	btstb	#ovfl_bit,FPCR_ENABLE(%a6) |test FPCR for ovfl enabled
+	beqs	ovf_dis
+
+ovf_ena:
+	clrl	FP_SCR1(%a6)		|set exceptional operand
+	clrl	FP_SCR1+4(%a6)
+	clrl	FP_SCR1+8(%a6)
+
+	bfclr	STAG(%a6){#5:#3}		|clear wbtm66,wbtm1,wbtm0
+	bclrb	#wbtemp15_bit,WB_BYTE(%a6) |clear wbtemp15
+	bsetb	#sticky_bit,STICKY(%a6)	|set sticky bit
+
+	bclrb	#E1,E_BYTE(%a6)
+|					;fall through to disabled case
+
+| For disabled overflow call 'ovf_r_k'.  This routine loads the
+| correct result based on the rounding precision, destination
+| format, rounding mode and sign.
+|
+ovf_dis:
+	bsr	ovf_r_k			|returns unsigned ETEMP_EX
+|					;and sets FPSR_CC accordingly.
+	bfclr	ETEMP_SGN(%a6){#0:#8}	|fix sign
+	beqs	ovf_pos
+	bsetb	#sign_bit,ETEMP_EX(%a6)
+	bsetb	#sign_bit,FP_SCR1(%a6)	|set exceptional operand sign
+ovf_pos:
+	fmovemx ETEMP(%a6),%fp0-%fp0		|move the result to fp0
+	rts
+
+
+|
+|	INEX2 exception
+|
+| The inex2 and ainex bits are set.
+|
+t_inx2:
+	orl	#inx2a_mask,USER_FPSR(%a6) |set INEX2, AINEX
+	rts
+
+|
+|	Force Inex2
+|
+| This routine is called by the transcendental routines to force
+| the inex2 exception bits set in the FPSR.  If the underflow bit
+| is set, but the underflow trap was not taken, the aunfl bit in
+| the FPSR must be set.
+|
+t_frcinx:
+	orl	#inx2a_mask,USER_FPSR(%a6) |set INEX2, AINEX
+	btstb	#unfl_bit,FPSR_EXCEPT(%a6) |test for unfl bit set
+	beqs	no_uacc1		|if clear, do not set aunfl
+	bsetb	#aunfl_bit,FPSR_AEXCEPT(%a6)
+no_uacc1:
+	rts
+
+|
+|	DST_NAN
+|
+| Determine if the destination nan is signalling or non-signalling,
+| and set the FPSR bits accordingly.  See the MC68040 User's Manual
+| section 3.2.2.5 NOT-A-NUMBERS.
+|
+dst_nan:
+	btstb	#sign_bit,FPTEMP_EX(%a6) |test sign of nan
+	beqs	dst_pos			|if clr, it was positive
+	bsetb	#neg_bit,FPSR_CC(%a6)	|set N bit
+dst_pos:
+	btstb	#signan_bit,FPTEMP_HI(%a6) |check if signalling
+	beqs	dst_snan		|branch if signalling
+
+	fmovel	%d1,%fpcr			|restore user's rmode/prec
+	fmovex FPTEMP(%a6),%fp0		|return the non-signalling nan
+|
+| Check the source nan.  If it is signalling, snan will be reported.
+|
+	moveb	STAG(%a6),%d0
+	andib	#0xe0,%d0
+	cmpib	#0x60,%d0
+	bnes	no_snan
+	btstb	#signan_bit,ETEMP_HI(%a6) |check if signalling
+	bnes	no_snan
+	orl	#snaniop_mask,USER_FPSR(%a6) |set NAN, SNAN, AIOP
+no_snan:
+	rts
+
+dst_snan:
+	btstb	#snan_bit,FPCR_ENABLE(%a6) |check if trap enabled
+	beqs	dst_dis			|branch if disabled
+
+	orb	#nan_tag,DTAG(%a6)	|set up dtag for nan
+	st	STORE_FLG(%a6)		|do not store a result
+	orl	#snaniop_mask,USER_FPSR(%a6) |set NAN, SNAN, AIOP
+	rts
+
+dst_dis:
+	bsetb	#signan_bit,FPTEMP_HI(%a6) |set SNAN bit in sop
+	fmovel	%d1,%fpcr			|restore user's rmode/prec
+	fmovex FPTEMP(%a6),%fp0		|load non-sign. nan
+	orl	#snaniop_mask,USER_FPSR(%a6) |set NAN, SNAN, AIOP
+	rts
+
+|
+|	SRC_NAN
+|
+| Determine if the source nan is signalling or non-signalling,
+| and set the FPSR bits accordingly.  See the MC68040 User's Manual
+| section 3.2.2.5 NOT-A-NUMBERS.
+|
+src_nan:
+	btstb	#sign_bit,ETEMP_EX(%a6) |test sign of nan
+	beqs	src_pos			|if clr, it was positive
+	bsetb	#neg_bit,FPSR_CC(%a6)	|set N bit
+src_pos:
+	btstb	#signan_bit,ETEMP_HI(%a6) |check if signalling
+	beqs	src_snan		|branch if signalling
+	fmovel	%d1,%fpcr			|restore user's rmode/prec
+	fmovex ETEMP(%a6),%fp0		|return the non-signalling nan
+	rts
+
+src_snan:
+	btstb	#snan_bit,FPCR_ENABLE(%a6) |check if trap enabled
+	beqs	src_dis			|branch if disabled
+	bsetb	#signan_bit,ETEMP_HI(%a6) |set SNAN bit in sop
+	orb	#norm_tag,DTAG(%a6)	|set up dtag for norm
+	orb	#nan_tag,STAG(%a6)	|set up stag for nan
+	st	STORE_FLG(%a6)		|do not store a result
+	orl	#snaniop_mask,USER_FPSR(%a6) |set NAN, SNAN, AIOP
+	rts
+
+src_dis:
+	bsetb	#signan_bit,ETEMP_HI(%a6) |set SNAN bit in sop
+	fmovel	%d1,%fpcr			|restore user's rmode/prec
+	fmovex ETEMP(%a6),%fp0		|load non-sign. nan
+	orl	#snaniop_mask,USER_FPSR(%a6) |set NAN, SNAN, AIOP
+	rts
+
+|
+| For all functions that have a denormalized input and that f(x)=x,
+| this is the entry point
+|
+t_extdnrm:
+	orl	#unfinx_mask,USER_FPSR(%a6)
+|					;set UNFL, INEX2, AUNFL, AINEX
+	bras	xdnrm_con
+|
+| Entry point for scale with extended denorm.  The function does
+| not set inex2, aunfl, or ainex.
+|
+t_resdnrm:
+	orl	#unfl_mask,USER_FPSR(%a6)
+
+xdnrm_con:
+	btstb	#unfl_bit,FPCR_ENABLE(%a6)
+	beqs	xdnrm_dis
+
+|
+| If exceptions are enabled, the additional task of setting up WBTEMP
+| is needed so that when the underflow exception handler is entered,
+| the user perceives no difference between what the 040 provides vs.
+| what the FPSP provides.
+|
+xdnrm_ena:
+	movel	%a0,-(%a7)
+
+	movel	LOCAL_EX(%a0),FP_SCR1(%a6)
+	movel	LOCAL_HI(%a0),FP_SCR1+4(%a6)
+	movel	LOCAL_LO(%a0),FP_SCR1+8(%a6)
+
+	lea	FP_SCR1(%a6),%a0
+
+	bclrb	#sign_bit,LOCAL_EX(%a0)
+	sne	LOCAL_SGN(%a0)		|convert to internal ext format
+	tstw	LOCAL_EX(%a0)		|check if input is denorm
+	beqs	xdnrm_dn		|if so, skip nrm_set
+	bsr	nrm_set			|normalize the result (exponent
+|					;will be negative
+xdnrm_dn:
+	bclrb	#sign_bit,LOCAL_EX(%a0)	|take off false sign
+	bfclr	LOCAL_SGN(%a0){#0:#8}	|change back to IEEE ext format
+	beqs	xdep
+	bsetb	#sign_bit,LOCAL_EX(%a0)
+xdep:
+	bfclr	STAG(%a6){#5:#3}		|clear wbtm66,wbtm1,wbtm0
+	bsetb	#wbtemp15_bit,WB_BYTE(%a6) |set wbtemp15
+	bclrb	#sticky_bit,STICKY(%a6)	|clear sticky bit
+	bclrb	#E1,E_BYTE(%a6)
+	movel	(%a7)+,%a0
+xdnrm_dis:
+	bfextu	FPCR_MODE(%a6){#0:#2},%d0	|get round precision
+	bnes	not_ext			|if not round extended, store
+|					;IEEE defaults
+is_ext:
+	btstb	#sign_bit,LOCAL_EX(%a0)
+	beqs	xdnrm_store
+
+	bsetb	#neg_bit,FPSR_CC(%a6)	|set N bit in FPSR_CC
+
+	bras	xdnrm_store
+
+not_ext:
+	bclrb	#sign_bit,LOCAL_EX(%a0)
+	sne	LOCAL_SGN(%a0)		|convert to internal ext format
+	bsr	unf_sub			|returns IEEE result pointed by
+|					;a0; sets FPSR_CC accordingly
+	bfclr	LOCAL_SGN(%a0){#0:#8}	|convert back to IEEE ext format
+	beqs	xdnrm_store
+	bsetb	#sign_bit,LOCAL_EX(%a0)
+xdnrm_store:
+	fmovemx (%a0),%fp0-%fp0		|store result in fp0
+	rts
+
+|
+| This subroutine is used for dyadic operations that use an extended
+| denorm within the kernel. The approach used is to capture the frame,
+| fix/restore.
+|
+	.global	t_avoid_unsupp
+t_avoid_unsupp:
+	link	%a2,#-LOCAL_SIZE		|so that a2 fpsp.h negative
+|					;offsets may be used
+	fsave	-(%a7)
+	tstb	1(%a7)			|check if idle, exit if so
+	beq	idle_end
+	btstb	#E1,E_BYTE(%a2)		|check for an E1 exception if
+|					;enabled, there is an unsupp
+	beq	end_avun		|else, exit
+	btstb	#7,DTAG(%a2)		|check for denorm destination
+	beqs	src_den			|else, must be a source denorm
+|
+| handle destination denorm
+|
+	lea	FPTEMP(%a2),%a0
+	btstb	#sign_bit,LOCAL_EX(%a0)
+	sne	LOCAL_SGN(%a0)		|convert to internal ext format
+	bclrb	#7,DTAG(%a2)		|set DTAG to norm
+	bsr	nrm_set			|normalize result, exponent
+|					;will become negative
+	bclrb	#sign_bit,LOCAL_EX(%a0)	|get rid of fake sign
+	bfclr	LOCAL_SGN(%a0){#0:#8}	|convert back to IEEE ext format
+	beqs	ck_src_den		|check if source is also denorm
+	bsetb	#sign_bit,LOCAL_EX(%a0)
+ck_src_den:
+	btstb	#7,STAG(%a2)
+	beqs	end_avun
+src_den:
+	lea	ETEMP(%a2),%a0
+	btstb	#sign_bit,LOCAL_EX(%a0)
+	sne	LOCAL_SGN(%a0)		|convert to internal ext format
+	bclrb	#7,STAG(%a2)		|set STAG to norm
+	bsr	nrm_set			|normalize result, exponent
+|					;will become negative
+	bclrb	#sign_bit,LOCAL_EX(%a0)	|get rid of fake sign
+	bfclr	LOCAL_SGN(%a0){#0:#8}	|convert back to IEEE ext format
+	beqs	den_com
+	bsetb	#sign_bit,LOCAL_EX(%a0)
+den_com:
+	moveb	#0xfe,CU_SAVEPC(%a2)	|set continue frame
+	clrw	NMNEXC(%a2)		|clear NMNEXC
+	bclrb	#E1,E_BYTE(%a2)
+|	fmove.l	%FPSR,FPSR_SHADOW(%a2)
+|	bset.b	#SFLAG,E_BYTE(%a2)
+|	bset.b	#XFLAG,T_BYTE(%a2)
+end_avun:
+	frestore (%a7)+
+	unlk	%a2
+	rts
+idle_end:
+	addl	#4,%a7
+	unlk	%a2
+	rts
+	|end