Merge remote-tracking branch 'upstream' into next

 - bring back critical fixes (esp. aa67f6096c19bc)
 - provide an updated base for development

* upstream: (4334 commits)
  missed mnt_drop_write() in do_dentry_open()
  UBIFS: nuke pdflush from comments
  gfs2: nuke pdflush from comments
  drbd: nuke pdflush from comments
  nilfs2: nuke write_super from comments
  hfs: nuke write_super from comments
  vfs: nuke pdflush from comments
  jbd/jbd2: nuke write_super from comments
  btrfs: nuke pdflush from comments
  btrfs: nuke write_super from comments
  ext4: nuke pdflush from comments
  ext4: nuke write_super from comments
  ext3: nuke write_super from comments
  Documentation: fix the VM knobs descritpion WRT pdflush
  Documentation: get rid of write_super
  vfs: kill write_super and sync_supers
  ACPI processor: Fix tick_broadcast_mask online/offline regression
  ACPI: Only count valid srat memory structures
  ACPI: Untangle a return statement for better readability
  Linux 3.6-rc1
  ...

Signed-off-by: Avi Kivity <avi@redhat.com>

1 files changed, 0 insertions, 248 deletions

diff --git a/arch/m68k/include/asm/apollodma.h b/arch/m68k/include/asm/apollodma.h
deleted file mode 100644
index 954adc851ad..00000000000
--- a/arch/m68k/include/asm/apollodma.h
+++ /dev/null
@@ -1,248 +0,0 @@
-/*
- * linux/include/asm/dma.h: Defines for using and allocating dma channels.
- * Written by Hennus Bergman, 1992.
- * High DMA channel support & info by Hannu Savolainen
- * and John Boyd, Nov. 1992.
- */
-
-#ifndef _ASM_APOLLO_DMA_H
-#define _ASM_APOLLO_DMA_H
-
-#include <asm/apollohw.h>		/* need byte IO */
-#include <linux/spinlock.h>		/* And spinlocks */
-#include <linux/delay.h>
-
-
-#define dma_outb(val,addr) (*((volatile unsigned char *)(addr+IO_BASE)) = (val))
-#define dma_inb(addr)	   (*((volatile unsigned char *)(addr+IO_BASE)))
-
-/*
- * NOTES about DMA transfers:
- *
- *  controller 1: channels 0-3, byte operations, ports 00-1F
- *  controller 2: channels 4-7, word operations, ports C0-DF
- *
- *  - ALL registers are 8 bits only, regardless of transfer size
- *  - channel 4 is not used - cascades 1 into 2.
- *  - channels 0-3 are byte - addresses/counts are for physical bytes
- *  - channels 5-7 are word - addresses/counts are for physical words
- *  - transfers must not cross physical 64K (0-3) or 128K (5-7) boundaries
- *  - transfer count loaded to registers is 1 less than actual count
- *  - controller 2 offsets are all even (2x offsets for controller 1)
- *  - page registers for 5-7 don't use data bit 0, represent 128K pages
- *  - page registers for 0-3 use bit 0, represent 64K pages
- *
- * DMA transfers are limited to the lower 16MB of _physical_ memory.
- * Note that addresses loaded into registers must be _physical_ addresses,
- * not logical addresses (which may differ if paging is active).
- *
- *  Address mapping for channels 0-3:
- *
- *   A23 ... A16 A15 ... A8  A7 ... A0    (Physical addresses)
- *    |  ...  |   |  ... |   |  ... |
- *    |  ...  |   |  ... |   |  ... |
- *    |  ...  |   |  ... |   |  ... |
- *   P7  ...  P0  A7 ... A0  A7 ... A0
- * |    Page    | Addr MSB | Addr LSB |   (DMA registers)
- *
- *  Address mapping for channels 5-7:
- *
- *   A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0    (Physical addresses)
- *    |  ...  |   \   \   ... \  \  \  ... \  \
- *    |  ...  |    \   \   ... \  \  \  ... \  (not used)
- *    |  ...  |     \   \   ... \  \  \  ... \
- *   P7  ...  P1 (0) A7 A6  ... A0 A7 A6 ... A0
- * |      Page      |  Addr MSB   |  Addr LSB  |   (DMA registers)
- *
- * Again, channels 5-7 transfer _physical_ words (16 bits), so addresses
- * and counts _must_ be word-aligned (the lowest address bit is _ignored_ at
- * the hardware level, so odd-byte transfers aren't possible).
- *
- * Transfer count (_not # bytes_) is limited to 64K, represented as actual
- * count - 1 : 64K => 0xFFFF, 1 => 0x0000.  Thus, count is always 1 or more,
- * and up to 128K bytes may be transferred on channels 5-7 in one operation.
- *
- */
-
-#define MAX_DMA_CHANNELS	8
-
-/* The maximum address that we can perform a DMA transfer to on this platform */#define MAX_DMA_ADDRESS      (PAGE_OFFSET+0x1000000)
-
-/* 8237 DMA controllers */
-#define IO_DMA1_BASE	0x10C00	/* 8 bit slave DMA, channels 0..3 */
-#define IO_DMA2_BASE	0x10D00	/* 16 bit master DMA, ch 4(=slave input)..7 */
-
-/* DMA controller registers */
-#define DMA1_CMD_REG		(IO_DMA1_BASE+0x08) /* command register (w) */
-#define DMA1_STAT_REG		(IO_DMA1_BASE+0x08) /* status register (r) */
-#define DMA1_REQ_REG            (IO_DMA1_BASE+0x09) /* request register (w) */
-#define DMA1_MASK_REG		(IO_DMA1_BASE+0x0A) /* single-channel mask (w) */
-#define DMA1_MODE_REG		(IO_DMA1_BASE+0x0B) /* mode register (w) */
-#define DMA1_CLEAR_FF_REG	(IO_DMA1_BASE+0x0C) /* clear pointer flip-flop (w) */
-#define DMA1_TEMP_REG           (IO_DMA1_BASE+0x0D) /* Temporary Register (r) */
-#define DMA1_RESET_REG		(IO_DMA1_BASE+0x0D) /* Master Clear (w) */
-#define DMA1_CLR_MASK_REG       (IO_DMA1_BASE+0x0E) /* Clear Mask */
-#define DMA1_MASK_ALL_REG       (IO_DMA1_BASE+0x0F) /* all-channels mask (w) */
-
-#define DMA2_CMD_REG		(IO_DMA2_BASE+0x10) /* command register (w) */
-#define DMA2_STAT_REG		(IO_DMA2_BASE+0x10) /* status register (r) */
-#define DMA2_REQ_REG            (IO_DMA2_BASE+0x12) /* request register (w) */
-#define DMA2_MASK_REG		(IO_DMA2_BASE+0x14) /* single-channel mask (w) */
-#define DMA2_MODE_REG		(IO_DMA2_BASE+0x16) /* mode register (w) */
-#define DMA2_CLEAR_FF_REG	(IO_DMA2_BASE+0x18) /* clear pointer flip-flop (w) */
-#define DMA2_TEMP_REG           (IO_DMA2_BASE+0x1A) /* Temporary Register (r) */
-#define DMA2_RESET_REG		(IO_DMA2_BASE+0x1A) /* Master Clear (w) */
-#define DMA2_CLR_MASK_REG       (IO_DMA2_BASE+0x1C) /* Clear Mask */
-#define DMA2_MASK_ALL_REG       (IO_DMA2_BASE+0x1E) /* all-channels mask (w) */
-
-#define DMA_ADDR_0              (IO_DMA1_BASE+0x00) /* DMA address registers */
-#define DMA_ADDR_1              (IO_DMA1_BASE+0x02)
-#define DMA_ADDR_2              (IO_DMA1_BASE+0x04)
-#define DMA_ADDR_3              (IO_DMA1_BASE+0x06)
-#define DMA_ADDR_4              (IO_DMA2_BASE+0x00)
-#define DMA_ADDR_5              (IO_DMA2_BASE+0x04)
-#define DMA_ADDR_6              (IO_DMA2_BASE+0x08)
-#define DMA_ADDR_7              (IO_DMA2_BASE+0x0C)
-
-#define DMA_CNT_0               (IO_DMA1_BASE+0x01)   /* DMA count registers */
-#define DMA_CNT_1               (IO_DMA1_BASE+0x03)
-#define DMA_CNT_2               (IO_DMA1_BASE+0x05)
-#define DMA_CNT_3               (IO_DMA1_BASE+0x07)
-#define DMA_CNT_4               (IO_DMA2_BASE+0x02)
-#define DMA_CNT_5               (IO_DMA2_BASE+0x06)
-#define DMA_CNT_6               (IO_DMA2_BASE+0x0A)
-#define DMA_CNT_7               (IO_DMA2_BASE+0x0E)
-
-#define DMA_MODE_READ	0x44	/* I/O to memory, no autoinit, increment, single mode */
-#define DMA_MODE_WRITE	0x48	/* memory to I/O, no autoinit, increment, single mode */
-#define DMA_MODE_CASCADE 0xC0   /* pass thru DREQ->HRQ, DACK<-HLDA only */
-
-#define DMA_AUTOINIT	0x10
-
-#define DMA_8BIT 0
-#define DMA_16BIT 1
-#define DMA_BUSMASTER 2
-
-extern spinlock_t  dma_spin_lock;
-
-static __inline__ unsigned long claim_dma_lock(void)
-{
-	unsigned long flags;
-	spin_lock_irqsave(&dma_spin_lock, flags);
-	return flags;
-}
-
-static __inline__ void release_dma_lock(unsigned long flags)
-{
-	spin_unlock_irqrestore(&dma_spin_lock, flags);
-}
-
-/* enable/disable a specific DMA channel */
-static __inline__ void enable_dma(unsigned int dmanr)
-{
-	if (dmanr<=3)
-		dma_outb(dmanr,  DMA1_MASK_REG);
-	else
-		dma_outb(dmanr & 3,  DMA2_MASK_REG);
-}
-
-static __inline__ void disable_dma(unsigned int dmanr)
-{
-	if (dmanr<=3)
-		dma_outb(dmanr | 4,  DMA1_MASK_REG);
-	else
-		dma_outb((dmanr & 3) | 4,  DMA2_MASK_REG);
-}
-
-/* Clear the 'DMA Pointer Flip Flop'.
- * Write 0 for LSB/MSB, 1 for MSB/LSB access.
- * Use this once to initialize the FF to a known state.
- * After that, keep track of it. :-)
- * --- In order to do that, the DMA routines below should ---
- * --- only be used while holding the DMA lock ! ---
- */
-static __inline__ void clear_dma_ff(unsigned int dmanr)
-{
-	if (dmanr<=3)
-		dma_outb(0,  DMA1_CLEAR_FF_REG);
-	else
-		dma_outb(0,  DMA2_CLEAR_FF_REG);
-}
-
-/* set mode (above) for a specific DMA channel */
-static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
-{
-	if (dmanr<=3)
-		dma_outb(mode | dmanr,  DMA1_MODE_REG);
-	else
-		dma_outb(mode | (dmanr&3),  DMA2_MODE_REG);
-}
-
-/* Set transfer address & page bits for specific DMA channel.
- * Assumes dma flipflop is clear.
- */
-static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
-{
-	if (dmanr <= 3)  {
-	    dma_outb( a & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
-            dma_outb( (a>>8) & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
-	}  else  {
-	    dma_outb( (a>>1) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE );
-	    dma_outb( (a>>9) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE );
-	}
-}
-
-
-/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for
- * a specific DMA channel.
- * You must ensure the parameters are valid.
- * NOTE: from a manual: "the number of transfers is one more
- * than the initial word count"! This is taken into account.
- * Assumes dma flip-flop is clear.
- * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7.
- */
-static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
-{
-        count--;
-	if (dmanr <= 3)  {
-	    dma_outb( count & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE );
-	    dma_outb( (count>>8) & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE );
-        } else {
-	    dma_outb( (count>>1) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE );
-	    dma_outb( (count>>9) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE );
-        }
-}
-
-
-/* Get DMA residue count. After a DMA transfer, this
- * should return zero. Reading this while a DMA transfer is
- * still in progress will return unpredictable results.
- * If called before the channel has been used, it may return 1.
- * Otherwise, it returns the number of _bytes_ left to transfer.
- *
- * Assumes DMA flip-flop is clear.
- */
-static __inline__ int get_dma_residue(unsigned int dmanr)
-{
-	unsigned int io_port = (dmanr<=3)? ((dmanr&3)<<1) + 1 + IO_DMA1_BASE
-					 : ((dmanr&3)<<2) + 2 + IO_DMA2_BASE;
-
-	/* using short to get 16-bit wrap around */
-	unsigned short count;
-
-	count = 1 + dma_inb(io_port);
-	count += dma_inb(io_port) << 8;
-
-	return (dmanr<=3)? count : (count<<1);
-}
-
-
-/* These are in kernel/dma.c: */
-extern int request_dma(unsigned int dmanr, const char * device_id);	/* reserve a DMA channel */
-extern void free_dma(unsigned int dmanr);	/* release it again */
-
-/* These are in arch/m68k/apollo/dma.c: */
-extern unsigned short dma_map_page(unsigned long phys_addr,int count,int type);
-extern void dma_unmap_page(unsigned short dma_addr);
-
-#endif /* _ASM_APOLLO_DMA_H */