Merge tag 'v3.8-rc5' into x86/mm

The __pa() fixup series that follows touches KVM code that is not
present in the existing branch based on v3.7-rc5, so merge in the
current upstream from Linus.

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>

16 files changed, 160 insertions, 357 deletions

diff --git a/arch/m68k/include/asm/Kbuild b/arch/m68k/include/asm/Kbuild
index 88fa3ac86fa..c7933e41f10 100644
--- a/arch/m68k/include/asm/Kbuild
+++ b/arch/m68k/include/asm/Kbuild
@@ -7,6 +7,7 @@ generic-y += emergency-restart.h
 generic-y += errno.h
 generic-y += exec.h
 generic-y += futex.h
+generic-y += hw_irq.h
 generic-y += ioctl.h
 generic-y += ipcbuf.h
 generic-y += irq_regs.h
@@ -21,9 +22,13 @@ generic-y += percpu.h
 generic-y += resource.h
 generic-y += scatterlist.h
 generic-y += sections.h
+generic-y += shmparam.h
 generic-y += siginfo.h
+generic-y += spinlock.h
 generic-y += statfs.h
+generic-y += termios.h
 generic-y += topology.h
+generic-y += trace_clock.h
 generic-y += types.h
 generic-y += word-at-a-time.h
 generic-y += xor.h
diff --git a/arch/m68k/include/asm/dma-mapping.h b/arch/m68k/include/asm/dma-mapping.h
index 17f7a45948e..3e6b8445af6 100644
--- a/arch/m68k/include/asm/dma-mapping.h
+++ b/arch/m68k/include/asm/dma-mapping.h
@@ -21,6 +21,22 @@ extern void *dma_alloc_coherent(struct device *, size_t,
 extern void dma_free_coherent(struct device *, size_t,
 			      void *, dma_addr_t);
 
+static inline void *dma_alloc_attrs(struct device *dev, size_t size,
+				    dma_addr_t *dma_handle, gfp_t flag,
+				    struct dma_attrs *attrs)
+{
+	/* attrs is not supported and ignored */
+	return dma_alloc_coherent(dev, size, dma_handle, flag);
+}
+
+static inline void dma_free_attrs(struct device *dev, size_t size,
+				  void *cpu_addr, dma_addr_t dma_handle,
+				  struct dma_attrs *attrs)
+{
+	/* attrs is not supported and ignored */
+	dma_free_coherent(dev, size, cpu_addr, dma_handle);
+}
+
 static inline void *dma_alloc_noncoherent(struct device *dev, size_t size,
 					  dma_addr_t *handle, gfp_t flag)
 {
diff --git a/arch/m68k/include/asm/hw_irq.h b/arch/m68k/include/asm/hw_irq.h
deleted file mode 100644
index eacef0951fb..00000000000
--- a/arch/m68k/include/asm/hw_irq.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_M68K_HW_IRQ_H
-#define __ASM_M68K_HW_IRQ_H
-
-/* Dummy include. */
-
-#endif
diff --git a/arch/m68k/include/asm/m5249sim.h b/arch/m68k/include/asm/m5249sim.h
deleted file mode 100644
index fdf45e6807c..00000000000
--- a/arch/m68k/include/asm/m5249sim.h
+++ /dev/null
@@ -1,269 +0,0 @@
-/****************************************************************************/
-
-/*
- *	m5249sim.h -- ColdFire 5249 System Integration Module support.
- *
- *	(C) Copyright 2002, Greg Ungerer (gerg@snapgear.com)
- */
-
-/****************************************************************************/
-#ifndef	m5249sim_h
-#define	m5249sim_h
-/****************************************************************************/
-
-#define	CPU_NAME		"COLDFIRE(m5249)"
-#define	CPU_INSTR_PER_JIFFY	3
-#define	MCF_BUSCLK		(MCF_CLK / 2)
-
-#include <asm/m52xxacr.h>
-
-/*
- *	The 5249 has a second MBAR region, define its address.
- */
-#define MCF_MBAR2		0x80000000
-
-/*
- *	Define the 5249 SIM register set addresses.
- */
-#define	MCFSIM_RSR		(MCF_MBAR + 0x00)	/* Reset Status */
-#define	MCFSIM_SYPCR		(MCF_MBAR + 0x01)	/* System Protection */
-#define	MCFSIM_SWIVR		(MCF_MBAR + 0x02)	/* SW Watchdog intr */
-#define	MCFSIM_SWSR		(MCF_MBAR + 0x03)	/* SW Watchdog srv */
-#define	MCFSIM_PAR		(MCF_MBAR + 0x04)	/* Pin Assignment */
-#define	MCFSIM_IRQPAR		(MCF_MBAR + 0x06)	/* Intr Assignment */
-#define	MCFSIM_MPARK		(MCF_MBAR + 0x0C)	/* BUS Master Ctrl */
-#define	MCFSIM_IPR		(MCF_MBAR + 0x40)	/* Interrupt Pending */
-#define	MCFSIM_IMR		(MCF_MBAR + 0x44)	/* Interrupt Mask */
-#define	MCFSIM_AVR		(MCF_MBAR + 0x4b)	/* Autovector Ctrl */
-#define	MCFSIM_ICR0		(MCF_MBAR + 0x4c)	/* Intr Ctrl reg 0 */
-#define	MCFSIM_ICR1		(MCF_MBAR + 0x4d)	/* Intr Ctrl reg 1 */
-#define	MCFSIM_ICR2		(MCF_MBAR + 0x4e)	/* Intr Ctrl reg 2 */
-#define	MCFSIM_ICR3		(MCF_MBAR + 0x4f)	/* Intr Ctrl reg 3 */
-#define	MCFSIM_ICR4		(MCF_MBAR + 0x50)	/* Intr Ctrl reg 4 */
-#define	MCFSIM_ICR5		(MCF_MBAR + 0x51)	/* Intr Ctrl reg 5 */
-#define	MCFSIM_ICR6		(MCF_MBAR + 0x52)	/* Intr Ctrl reg 6 */
-#define	MCFSIM_ICR7		(MCF_MBAR + 0x53)	/* Intr Ctrl reg 7 */
-#define	MCFSIM_ICR8		(MCF_MBAR + 0x54)	/* Intr Ctrl reg 8 */
-#define	MCFSIM_ICR9		(MCF_MBAR + 0x55)	/* Intr Ctrl reg 9 */
-#define	MCFSIM_ICR10		(MCF_MBAR + 0x56)	/* Intr Ctrl reg 10 */
-#define	MCFSIM_ICR11		(MCF_MBAR + 0x57)	/* Intr Ctrl reg 11 */
-
-#define	MCFSIM_CSAR0		(MCF_MBAR + 0x80)	/* CS 0 Address reg */
-#define	MCFSIM_CSMR0		(MCF_MBAR + 0x84)	/* CS 0 Mask reg */
-#define	MCFSIM_CSCR0		(MCF_MBAR + 0x8a)	/* CS 0 Control reg */
-#define	MCFSIM_CSAR1		(MCF_MBAR + 0x8c)	/* CS 1 Address reg */
-#define	MCFSIM_CSMR1		(MCF_MBAR + 0x90)	/* CS 1 Mask reg */
-#define	MCFSIM_CSCR1		(MCF_MBAR + 0x96)	/* CS 1 Control reg */
-#define	MCFSIM_CSAR2		(MCF_MBAR + 0x98)	/* CS 2 Address reg */
-#define	MCFSIM_CSMR2		(MCF_MBAR + 0x9c)	/* CS 2 Mask reg */
-#define	MCFSIM_CSCR2		(MCF_MBAR + 0xa2)	/* CS 2 Control reg */
-#define	MCFSIM_CSAR3		(MCF_MBAR + 0xa4)	/* CS 3 Address reg */
-#define	MCFSIM_CSMR3		(MCF_MBAR + 0xa8)	/* CS 3 Mask reg */
-#define	MCFSIM_CSCR3		(MCF_MBAR + 0xae)	/* CS 3 Control reg */
-
-#define MCFSIM_DCR		(MCF_MBAR + 0x100)	/* DRAM Control */
-#define MCFSIM_DACR0		(MCF_MBAR + 0x108)	/* DRAM 0 Addr/Ctrl */
-#define MCFSIM_DMR0		(MCF_MBAR + 0x10c)	/* DRAM 0 Mask */
-#define MCFSIM_DACR1		(MCF_MBAR + 0x110)	/* DRAM 1 Addr/Ctrl */
-#define MCFSIM_DMR1		(MCF_MBAR + 0x114)	/* DRAM 1 Mask */
-
-/*
- *	Timer module.
- */
-#define MCFTIMER_BASE1		(MCF_MBAR + 0x140)	/* Base of TIMER1 */
-#define MCFTIMER_BASE2		(MCF_MBAR + 0x180)	/* Base of TIMER2 */
-
-/*
- *	UART module.
- */
-#define MCFUART_BASE0		(MCF_MBAR + 0x1c0)	/* Base address UART0 */
-#define MCFUART_BASE1		(MCF_MBAR + 0x200)	/* Base address UART1 */
-
-/*
- *	QSPI module.
- */
-#define	MCFQSPI_BASE		(MCF_MBAR + 0x300)	/* Base address QSPI */
-#define	MCFQSPI_SIZE		0x40			/* Register set size */
-
-#define	MCFQSPI_CS0		29
-#define	MCFQSPI_CS1		24
-#define	MCFQSPI_CS2		21
-#define	MCFQSPI_CS3		22
-
-/*
- *	DMA unit base addresses.
- */
-#define MCFDMA_BASE0		(MCF_MBAR + 0x300)	/* Base address DMA 0 */
-#define MCFDMA_BASE1		(MCF_MBAR + 0x340)	/* Base address DMA 1 */
-#define MCFDMA_BASE2		(MCF_MBAR + 0x380)	/* Base address DMA 2 */
-#define MCFDMA_BASE3		(MCF_MBAR + 0x3C0)	/* Base address DMA 3 */
-
-/*
- *	Some symbol defines for the above...
- */
-#define	MCFSIM_SWDICR		MCFSIM_ICR0	/* Watchdog timer ICR */
-#define	MCFSIM_TIMER1ICR	MCFSIM_ICR1	/* Timer 1 ICR */
-#define	MCFSIM_TIMER2ICR	MCFSIM_ICR2	/* Timer 2 ICR */
-#define	MCFSIM_UART1ICR		MCFSIM_ICR4	/* UART 1 ICR */
-#define	MCFSIM_UART2ICR		MCFSIM_ICR5	/* UART 2 ICR */
-#define	MCFSIM_DMA0ICR		MCFSIM_ICR6	/* DMA 0 ICR */
-#define	MCFSIM_DMA1ICR		MCFSIM_ICR7	/* DMA 1 ICR */
-#define	MCFSIM_DMA2ICR		MCFSIM_ICR8	/* DMA 2 ICR */
-#define	MCFSIM_DMA3ICR		MCFSIM_ICR9	/* DMA 3 ICR */
-#define	MCFSIM_QSPIICR		MCFSIM_ICR10	/* QSPI ICR */
-
-/*
- *	Define system peripheral IRQ usage.
- */
-#define	MCF_IRQ_QSPI		28		/* QSPI, Level 4 */
-#define	MCF_IRQ_TIMER		30		/* Timer0, Level 6 */
-#define	MCF_IRQ_PROFILER	31		/* Timer1, Level 7 */
-
-#define	MCF_IRQ_UART0		73		/* UART0 */
-#define	MCF_IRQ_UART1		74		/* UART1 */
-
-/*
- *	General purpose IO registers (in MBAR2).
- */
-#define	MCFSIM2_GPIOREAD	(MCF_MBAR2 + 0x000)	/* GPIO read values */
-#define	MCFSIM2_GPIOWRITE	(MCF_MBAR2 + 0x004)	/* GPIO write values */
-#define	MCFSIM2_GPIOENABLE	(MCF_MBAR2 + 0x008)	/* GPIO enabled */
-#define	MCFSIM2_GPIOFUNC	(MCF_MBAR2 + 0x00C)	/* GPIO function */
-#define	MCFSIM2_GPIO1READ	(MCF_MBAR2 + 0x0B0)	/* GPIO1 read values */
-#define	MCFSIM2_GPIO1WRITE	(MCF_MBAR2 + 0x0B4)	/* GPIO1 write values */
-#define	MCFSIM2_GPIO1ENABLE	(MCF_MBAR2 + 0x0B8)	/* GPIO1 enabled */
-#define	MCFSIM2_GPIO1FUNC	(MCF_MBAR2 + 0x0BC)	/* GPIO1 function */
-
-#define	MCFSIM2_GPIOINTSTAT	(MCF_MBAR2 + 0xc0)	/* GPIO intr status */
-#define	MCFSIM2_GPIOINTCLEAR	(MCF_MBAR2 + 0xc0)	/* GPIO intr clear */
-#define	MCFSIM2_GPIOINTENABLE	(MCF_MBAR2 + 0xc4)	/* GPIO intr enable */
-
-#define	MCFSIM2_INTLEVEL1	(MCF_MBAR2 + 0x140)	/* Intr level reg 1 */
-#define	MCFSIM2_INTLEVEL2	(MCF_MBAR2 + 0x144)	/* Intr level reg 2 */
-#define	MCFSIM2_INTLEVEL3	(MCF_MBAR2 + 0x148)	/* Intr level reg 3 */
-#define	MCFSIM2_INTLEVEL4	(MCF_MBAR2 + 0x14c)	/* Intr level reg 4 */
-#define	MCFSIM2_INTLEVEL5	(MCF_MBAR2 + 0x150)	/* Intr level reg 5 */
-#define	MCFSIM2_INTLEVEL6	(MCF_MBAR2 + 0x154)	/* Intr level reg 6 */
-#define	MCFSIM2_INTLEVEL7	(MCF_MBAR2 + 0x158)	/* Intr level reg 7 */
-#define	MCFSIM2_INTLEVEL8	(MCF_MBAR2 + 0x15c)	/* Intr level reg 8 */
-
-#define	MCFSIM2_DMAROUTE	(MCF_MBAR2 + 0x188)	/* DMA routing */
-
-#define	MCFSIM2_IDECONFIG1	(MCF_MBAR2 + 0x18c)	/* IDEconfig1 */
-#define	MCFSIM2_IDECONFIG2	(MCF_MBAR2 + 0x190)	/* IDEconfig2 */
-
-/*
- * Define the base interrupt for the second interrupt controller.
- * We set it to 128, out of the way of the base interrupts, and plenty
- * of room for its 64 interrupts.
- */
-#define	MCFINTC2_VECBASE	128
-
-#define	MCFINTC2_GPIOIRQ0	(MCFINTC2_VECBASE + 32)
-#define	MCFINTC2_GPIOIRQ1	(MCFINTC2_VECBASE + 33)
-#define	MCFINTC2_GPIOIRQ2	(MCFINTC2_VECBASE + 34)
-#define	MCFINTC2_GPIOIRQ3	(MCFINTC2_VECBASE + 35)
-#define	MCFINTC2_GPIOIRQ4	(MCFINTC2_VECBASE + 36)
-#define	MCFINTC2_GPIOIRQ5	(MCFINTC2_VECBASE + 37)
-#define	MCFINTC2_GPIOIRQ6	(MCFINTC2_VECBASE + 38)
-#define	MCFINTC2_GPIOIRQ7	(MCFINTC2_VECBASE + 39)
-
-/*
- * Generic GPIO support
- */
-#define MCFGPIO_PIN_MAX		64
-#define MCFGPIO_IRQ_MAX		-1
-#define MCFGPIO_IRQ_VECBASE	-1
-
-/****************************************************************************/
-
-#ifdef __ASSEMBLER__
-
-/*
- *	The M5249C3 board needs a little help getting all its SIM devices
- *	initialized at kernel start time. dBUG doesn't set much up, so
- *	we need to do it manually.
- */
-.macro m5249c3_setup
-	/*
-	 *	Set MBAR1 and MBAR2, just incase they are not set.
-	 */
-	movel	#0x10000001,%a0
-	movec	%a0,%MBAR			/* map MBAR region */
-	subql	#1,%a0				/* get MBAR address in a0 */
-
-	movel	#0x80000001,%a1
-	movec	%a1,#3086			/* map MBAR2 region */
-	subql	#1,%a1				/* get MBAR2 address in a1 */
-
-	/*
-	 *      Move secondary interrupts to their base (128).
-	 */
-	moveb	#MCFINTC2_VECBASE,%d0
-	moveb	%d0,0x16b(%a1)			/* interrupt base register */
-
-	/*
-	 *      Work around broken CSMR0/DRAM vector problem.
-	 */
-	movel	#0x001F0021,%d0			/* disable C/I bit */
-	movel	%d0,0x84(%a0)			/* set CSMR0 */
-
-	/*
-	 *	Disable the PLL firstly. (Who knows what state it is
-	 *	in here!).
-	 */
-	movel	0x180(%a1),%d0			/* get current PLL value */
-	andl	#0xfffffffe,%d0			/* PLL bypass first */
-	movel	%d0,0x180(%a1)			/* set PLL register */
-	nop
-
-#if CONFIG_CLOCK_FREQ == 140000000
-	/*
-	 *	Set initial clock frequency. This assumes M5249C3 board
-	 *	is fitted with 11.2896MHz crystal. It will program the
-	 *	PLL for 140MHz. Lets go fast :-)
-	 */
-	movel	#0x125a40f0,%d0			/* set for 140MHz */
-	movel	%d0,0x180(%a1)			/* set PLL register */
-	orl	#0x1,%d0
-	movel	%d0,0x180(%a1)			/* set PLL register */
-#endif
-
-	/*
-	 *	Setup CS1 for ethernet controller.
-	 *	(Setup as per M5249C3 doco).
-	 */
-	movel  #0xe0000000,%d0			/* CS1 mapped at 0xe0000000 */
-	movel  %d0,0x8c(%a0)
-	movel  #0x001f0021,%d0			/* CS1 size of 1Mb */
-	movel  %d0,0x90(%a0)
-	movew  #0x0080,%d0			/* CS1 = 16bit port, AA */
-	movew  %d0,0x96(%a0)
-
-	/*
-	 *	Setup CS2 for IDE interface.
-	 */
-	movel	#0x50000000,%d0			/* CS2 mapped at 0x50000000 */
-	movel	%d0,0x98(%a0)
-	movel	#0x001f0001,%d0			/* CS2 size of 1MB */
-	movel	%d0,0x9c(%a0)
-	movew	#0x0080,%d0			/* CS2 = 16bit, TA */
-	movew	%d0,0xa2(%a0)
-
-	movel	#0x00107000,%d0			/* IDEconfig1 */
-	movel	%d0,0x18c(%a1)
-	movel	#0x000c0400,%d0			/* IDEconfig2 */
-	movel	%d0,0x190(%a1)
-
-	movel	#0x00080000,%d0			/* GPIO19, IDE reset bit */
-	orl	%d0,0xc(%a1)			/* function GPIO19 */
-	orl	%d0,0x8(%a1)			/* enable GPIO19 as output */
-        orl	%d0,0x4(%a1)			/* de-assert IDE reset */
-.endm
-
-#define	PLATFORM_SETUP	m5249c3_setup
-
-#endif /* __ASSEMBLER__ */
-
-/****************************************************************************/
-#endif	/* m5249sim_h */
diff --git a/arch/m68k/include/asm/m525xsim.h b/arch/m68k/include/asm/m525xsim.h
index acab61cb91e..e33f5bb6aca 100644
--- a/arch/m68k/include/asm/m525xsim.h
+++ b/arch/m68k/include/asm/m525xsim.h
@@ -12,6 +12,11 @@
 #define m525xsim_h
 /****************************************************************************/
 
+/*
+ *	This header supports ColdFire 5249, 5251 and 5253. There are a few
+ *	little differences between them, but most of the peripheral support
+ *	can be used by all of them.
+ */
 #define CPU_NAME		"COLDFIRE(m525x)"
 #define CPU_INSTR_PER_JIFFY	3
 #define MCF_BUSCLK		(MCF_CLK / 2)
@@ -65,6 +70,8 @@
 #define MCFSIM_DCR		(MCF_MBAR + 0x100)	/* DRAM Control */
 #define MCFSIM_DACR0		(MCF_MBAR + 0x108)	/* DRAM 0 Addr/Ctrl */
 #define MCFSIM_DMR0		(MCF_MBAR + 0x10c)	/* DRAM 0 Mask */
+#define MCFSIM_DACR1		(MCF_MBAR + 0x110)	/* DRAM 1 Addr/Ctrl */
+#define MCFSIM_DMR1		(MCF_MBAR + 0x114)	/* DRAM 1 Mask */
 
 /*
  * Secondary Interrupt Controller (in MBAR2)
@@ -101,11 +108,17 @@
 #define MCFQSPI_BASE		(MCF_MBAR + 0x300)	/* Base address QSPI */
 #define MCFQSPI_SIZE		0x40			/* Register set size */
 
-
+#ifdef CONFIG_M5249
+#define MCFQSPI_CS0		29
+#define MCFQSPI_CS1		24
+#define MCFQSPI_CS2		21
+#define MCFQSPI_CS3		22
+#else
 #define MCFQSPI_CS0		15
 #define MCFQSPI_CS1		16
 #define MCFQSPI_CS2		24
 #define MCFQSPI_CS3		28
+#endif
 
 /*
  *	I2C module.
@@ -115,6 +128,7 @@
 
 #define MCFI2C_BASE1		(MCF_MBAR2 + 0x440)	/* Base addreess I2C1 */
 #define MCFI2C_SIZE1		0x20			/* Register set size */
+
 /*
  *	DMA unit base addresses.
  */
@@ -163,6 +177,7 @@
 #define MCF_IRQ_GPIO4		(MCFINTC2_VECBASE + 36)
 #define MCF_IRQ_GPIO5		(MCFINTC2_VECBASE + 37)
 #define MCF_IRQ_GPIO6		(MCFINTC2_VECBASE + 38)
+#define MCF_IRQ_GPIO7		(MCFINTC2_VECBASE + 39)
 
 #define MCF_IRQ_USBWUP		(MCFINTC2_VECBASE + 40)
 #define MCF_IRQ_I2C1		(MCFINTC2_VECBASE + 62)
@@ -183,12 +198,111 @@
 #define MCFSIM2_GPIOINTCLEAR	(MCF_MBAR2 + 0xc0)	/* GPIO intr clear */
 #define MCFSIM2_GPIOINTENABLE	(MCF_MBAR2 + 0xc4)	/* GPIO intr enable */
 
+#define MCFSIM2_DMAROUTE	(MCF_MBAR2 + 0x188)     /* DMA routing */
+#define MCFSIM2_IDECONFIG1	(MCF_MBAR2 + 0x18c)	/* IDEconfig1 */
+#define MCFSIM2_IDECONFIG2	(MCF_MBAR2 + 0x190)	/* IDEconfig2 */
+
 /*
  * Generic GPIO support
  */
 #define MCFGPIO_PIN_MAX		64
+#ifdef CONFIG_M5249
+#define MCFGPIO_IRQ_MAX		-1
+#define MCFGPIO_IRQ_VECBASE	-1
+#else
 #define MCFGPIO_IRQ_MAX		7
 #define MCFGPIO_IRQ_VECBASE	MCF_IRQ_GPIO0
+#endif
+
+/****************************************************************************/
+
+#ifdef __ASSEMBLER__
+#ifdef CONFIG_M5249C3
+/*
+ *	The M5249C3 board needs a little help getting all its SIM devices
+ *	initialized at kernel start time. dBUG doesn't set much up, so
+ *	we need to do it manually.
+ */
+.macro m5249c3_setup
+	/*
+	 *	Set MBAR1 and MBAR2, just incase they are not set.
+	 */
+	movel	#0x10000001,%a0
+	movec	%a0,%MBAR			/* map MBAR region */
+	subql	#1,%a0				/* get MBAR address in a0 */
+
+	movel	#0x80000001,%a1
+	movec	%a1,#3086			/* map MBAR2 region */
+	subql	#1,%a1				/* get MBAR2 address in a1 */
+
+	/*
+	 *      Move secondary interrupts to their base (128).
+	 */
+	moveb	#MCFINTC2_VECBASE,%d0
+	moveb	%d0,0x16b(%a1)			/* interrupt base register */
+
+	/*
+	 *      Work around broken CSMR0/DRAM vector problem.
+	 */
+	movel	#0x001F0021,%d0			/* disable C/I bit */
+	movel	%d0,0x84(%a0)			/* set CSMR0 */
+
+	/*
+	 *	Disable the PLL firstly. (Who knows what state it is
+	 *	in here!).
+	 */
+	movel	0x180(%a1),%d0			/* get current PLL value */
+	andl	#0xfffffffe,%d0			/* PLL bypass first */
+	movel	%d0,0x180(%a1)			/* set PLL register */
+	nop
+
+#if CONFIG_CLOCK_FREQ == 140000000
+	/*
+	 *	Set initial clock frequency. This assumes M5249C3 board
+	 *	is fitted with 11.2896MHz crystal. It will program the
+	 *	PLL for 140MHz. Lets go fast :-)
+	 */
+	movel	#0x125a40f0,%d0			/* set for 140MHz */
+	movel	%d0,0x180(%a1)			/* set PLL register */
+	orl	#0x1,%d0
+	movel	%d0,0x180(%a1)			/* set PLL register */
+#endif
+
+	/*
+	 *	Setup CS1 for ethernet controller.
+	 *	(Setup as per M5249C3 doco).
+	 */
+	movel  #0xe0000000,%d0			/* CS1 mapped at 0xe0000000 */
+	movel  %d0,0x8c(%a0)
+	movel  #0x001f0021,%d0			/* CS1 size of 1Mb */
+	movel  %d0,0x90(%a0)
+	movew  #0x0080,%d0			/* CS1 = 16bit port, AA */
+	movew  %d0,0x96(%a0)
+
+	/*
+	 *	Setup CS2 for IDE interface.
+	 */
+	movel	#0x50000000,%d0			/* CS2 mapped at 0x50000000 */
+	movel	%d0,0x98(%a0)
+	movel	#0x001f0001,%d0			/* CS2 size of 1MB */
+	movel	%d0,0x9c(%a0)
+	movew	#0x0080,%d0			/* CS2 = 16bit, TA */
+	movew	%d0,0xa2(%a0)
+
+	movel	#0x00107000,%d0			/* IDEconfig1 */
+	movel	%d0,0x18c(%a1)
+	movel	#0x000c0400,%d0			/* IDEconfig2 */
+	movel	%d0,0x190(%a1)
+
+	movel	#0x00080000,%d0			/* GPIO19, IDE reset bit */
+	orl	%d0,0xc(%a1)			/* function GPIO19 */
+	orl	%d0,0x8(%a1)			/* enable GPIO19 as output */
+        orl	%d0,0x4(%a1)			/* de-assert IDE reset */
+.endm
+
+#define	PLATFORM_SETUP	m5249c3_setup
 
+#endif /* CONFIG_M5249C3 */
+#endif /* __ASSEMBLER__ */
 /****************************************************************************/
 #endif	/* m525xsim_h */
diff --git a/arch/m68k/include/asm/mcfclk.h b/arch/m68k/include/asm/mcfclk.h
index b676a02bb39..ea4791e3a55 100644
--- a/arch/m68k/include/asm/mcfclk.h
+++ b/arch/m68k/include/asm/mcfclk.h
@@ -8,7 +8,6 @@
 
 struct clk;
 
-#ifdef MCFPM_PPMCR0
 struct clk_ops {
 	void (*enable)(struct clk *);
 	void (*disable)(struct clk *);
@@ -23,6 +22,8 @@ struct clk {
 };
 
 extern struct clk *mcf_clks[];
+
+#ifdef MCFPM_PPMCR0
 extern struct clk_ops clk_ops0;
 #ifdef MCFPM_PPMCR1
 extern struct clk_ops clk_ops1;
@@ -38,6 +39,12 @@ static struct clk __clk_##clk_bank##_##clk_slot = { \
 
 void __clk_init_enabled(struct clk *);
 void __clk_init_disabled(struct clk *);
+#else
+#define DEFINE_CLK(clk_ref, clk_name, clk_rate) \
+        static struct clk clk_##clk_ref = { \
+                .name = clk_name, \
+                .rate = clk_rate, \
+        }
 #endif /* MCFPM_PPMCR0 */
 
 #endif /* mcfclk_h */
diff --git a/arch/m68k/include/asm/mcfsim.h b/arch/m68k/include/asm/mcfsim.h
index 7a83e619e73..a04fd9b2714 100644
--- a/arch/m68k/include/asm/mcfsim.h
+++ b/arch/m68k/include/asm/mcfsim.h
@@ -24,10 +24,7 @@
 #elif defined(CONFIG_M523x)
 #include <asm/m523xsim.h>
 #include <asm/mcfintc.h>
-#elif defined(CONFIG_M5249)
-#include <asm/m5249sim.h>
-#include <asm/mcfintc.h>
-#elif defined(CONFIG_M525x)
+#elif defined(CONFIG_M5249) || defined(CONFIG_M525x)
 #include <asm/m525xsim.h>
 #include <asm/mcfintc.h>
 #elif defined(CONFIG_M527x)
diff --git a/arch/m68k/include/asm/page_no.h b/arch/m68k/include/asm/page_no.h
index 90595721185..ef209169579 100644
--- a/arch/m68k/include/asm/page_no.h
+++ b/arch/m68k/include/asm/page_no.h
@@ -26,7 +26,7 @@ extern unsigned long memory_end;
 #define pfn_to_virt(pfn)	__va((pfn) << PAGE_SHIFT)
 
 #define virt_to_page(addr)	(mem_map + (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT))
-#define page_to_virt(page)	((((page) - mem_map) << PAGE_SHIFT) + PAGE_OFFSET)
+#define page_to_virt(page)	__va(((((page) - mem_map) << PAGE_SHIFT) + PAGE_OFFSET))
 
 #define pfn_to_page(pfn)	virt_to_page(pfn_to_virt(pfn))
 #define page_to_pfn(page)	virt_to_pfn(page_to_virt(page))
diff --git a/arch/m68k/include/asm/parport.h b/arch/m68k/include/asm/parport.h
index 646b1872f73..5ea75e6a739 100644
--- a/arch/m68k/include/asm/parport.h
+++ b/arch/m68k/include/asm/parport.h
@@ -15,8 +15,8 @@
 #define outsl(port,buf,len)  isa_outsb(port,buf,(len)<<2)
 
 /* no dma, or IRQ autoprobing */
-static int __devinit parport_pc_find_isa_ports (int autoirq, int autodma);
-static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma)
+static int parport_pc_find_isa_ports (int autoirq, int autodma);
+static int parport_pc_find_nonpci_ports (int autoirq, int autodma)
 {
         if (! (MACH_IS_Q40))
 	  return 0; /* count=0 */
diff --git a/arch/m68k/include/asm/pgtable_no.h b/arch/m68k/include/asm/pgtable_no.h
index bf86b29fe64..037028f4ab7 100644
--- a/arch/m68k/include/asm/pgtable_no.h
+++ b/arch/m68k/include/asm/pgtable_no.h
@@ -64,6 +64,8 @@ extern unsigned int kobjsize(const void *objp);
  */
 #define	VMALLOC_START	0
 #define	VMALLOC_END	0xffffffff
+#define	KMAP_START	0
+#define	KMAP_END	0xffffffff
 
 #include <asm-generic/pgtable.h>
 
diff --git a/arch/m68k/include/asm/ptrace.h b/arch/m68k/include/asm/ptrace.h
index 0f717045bdd..a45cb6894ad 100644
--- a/arch/m68k/include/asm/ptrace.h
+++ b/arch/m68k/include/asm/ptrace.h
@@ -15,6 +15,7 @@
 #define profile_pc(regs) instruction_pointer(regs)
 #define current_pt_regs() \
 	(struct pt_regs *)((char *)current_thread_info() + THREAD_SIZE) - 1
+#define current_user_stack_pointer() rdusp()
 
 #define arch_has_single_step()	(1)
 
diff --git a/arch/m68k/include/asm/shmparam.h b/arch/m68k/include/asm/shmparam.h
deleted file mode 100644
index 558892a2efb..00000000000
--- a/arch/m68k/include/asm/shmparam.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _M68K_SHMPARAM_H
-#define _M68K_SHMPARAM_H
-
-#define	SHMLBA PAGE_SIZE		 /* attach addr a multiple of this */
-
-#endif /* _M68K_SHMPARAM_H */
diff --git a/arch/m68k/include/asm/signal.h b/arch/m68k/include/asm/signal.h
index 67e489d8d1b..9c8c46b06b0 100644
--- a/arch/m68k/include/asm/signal.h
+++ b/arch/m68k/include/asm/signal.h
@@ -41,7 +41,7 @@ struct k_sigaction {
 static inline void sigaddset(sigset_t *set, int _sig)
 {
 	asm ("bfset %0{%1,#1}"
-		: "+od" (*set)
+		: "+o" (*set)
 		: "id" ((_sig - 1) ^ 31)
 		: "cc");
 }
@@ -49,7 +49,7 @@ static inline void sigaddset(sigset_t *set, int _sig)
 static inline void sigdelset(sigset_t *set, int _sig)
 {
 	asm ("bfclr %0{%1,#1}"
-		: "+od" (*set)
+		: "+o" (*set)
 		: "id" ((_sig - 1) ^ 31)
 		: "cc");
 }
@@ -65,7 +65,7 @@ static inline int __gen_sigismember(sigset_t *set, int _sig)
 	int ret;
 	asm ("bfextu %1{%2,#1},%0"
 		: "=d" (ret)
-		: "od" (*set), "id" ((_sig-1) ^ 31)
+		: "o" (*set), "id" ((_sig-1) ^ 31)
 		: "cc");
 	return ret;
 }
@@ -86,11 +86,9 @@ static inline int sigfindinword(unsigned long word)
 
 #endif /* !CONFIG_CPU_HAS_NO_BITFIELDS */
 
-#ifdef __uClinux__
-#define ptrace_signal_deliver(regs, cookie) do { } while (0)
-#else
-struct pt_regs;
-extern void ptrace_signal_deliver(struct pt_regs *regs, void *cookie);
+#ifndef __uClinux__
+extern void ptrace_signal_deliver(void);
+#define ptrace_signal_deliver ptrace_signal_deliver
 #endif /* __uClinux__ */
 
 #endif /* _M68K_SIGNAL_H */
diff --git a/arch/m68k/include/asm/spinlock.h b/arch/m68k/include/asm/spinlock.h
deleted file mode 100644
index 20f46e27b53..00000000000
--- a/arch/m68k/include/asm/spinlock.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __M68K_SPINLOCK_H
-#define __M68K_SPINLOCK_H
-
-#error "m68k doesn't do SMP yet"
-
-#endif
diff --git a/arch/m68k/include/asm/termios.h b/arch/m68k/include/asm/termios.h
deleted file mode 100644
index ad8efb09866..00000000000
--- a/arch/m68k/include/asm/termios.h
+++ /dev/null
@@ -1,50 +0,0 @@
-#ifndef _M68K_TERMIOS_H
-#define _M68K_TERMIOS_H
-
-#include <uapi/asm/termios.h>
-
-/*	intr=^C		quit=^|		erase=del	kill=^U
-	eof=^D		vtime=\0	vmin=\1		sxtc=\0
-	start=^Q	stop=^S		susp=^Z		eol=\0
-	reprint=^R	discard=^U	werase=^W	lnext=^V
-	eol2=\0
-*/
-#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
-
-/*
- * Translate a "termio" structure into a "termios". Ugh.
- */
-#define user_termio_to_kernel_termios(termios, termio) \
-({ \
-	unsigned short tmp; \
-	get_user(tmp, &(termio)->c_iflag); \
-	(termios)->c_iflag = (0xffff0000 & ((termios)->c_iflag)) | tmp; \
-	get_user(tmp, &(termio)->c_oflag); \
-	(termios)->c_oflag = (0xffff0000 & ((termios)->c_oflag)) | tmp; \
-	get_user(tmp, &(termio)->c_cflag); \
-	(termios)->c_cflag = (0xffff0000 & ((termios)->c_cflag)) | tmp; \
-	get_user(tmp, &(termio)->c_lflag); \
-	(termios)->c_lflag = (0xffff0000 & ((termios)->c_lflag)) | tmp; \
-	get_user((termios)->c_line, &(termio)->c_line); \
-	copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
-})
-
-/*
- * Translate a "termios" structure into a "termio". Ugh.
- */
-#define kernel_termios_to_user_termio(termio, termios) \
-({ \
-	put_user((termios)->c_iflag, &(termio)->c_iflag); \
-	put_user((termios)->c_oflag, &(termio)->c_oflag); \
-	put_user((termios)->c_cflag, &(termio)->c_cflag); \
-	put_user((termios)->c_lflag, &(termio)->c_lflag); \
-	put_user((termios)->c_line,  &(termio)->c_line); \
-	copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
-})
-
-#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2))
-#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2))
-#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios))
-#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios))
-
-#endif /* _M68K_TERMIOS_H */
diff --git a/arch/m68k/include/asm/unistd.h b/arch/m68k/include/asm/unistd.h
index 5fc7f7bec1c..f9337f61466 100644
--- a/arch/m68k/include/asm/unistd.h
+++ b/arch/m68k/include/asm/unistd.h
@@ -4,7 +4,7 @@
 #include <uapi/asm/unistd.h>
 
 
-#define NR_syscalls		348
+#define NR_syscalls		349
 
 #define __ARCH_WANT_OLD_READDIR
 #define __ARCH_WANT_OLD_STAT
@@ -31,8 +31,8 @@
 #define __ARCH_WANT_SYS_SIGPROCMASK
 #define __ARCH_WANT_SYS_RT_SIGACTION
 #define __ARCH_WANT_SYS_RT_SIGSUSPEND
-#define __ARCH_WANT_SYS_EXECVE
-#define __ARCH_WANT_KERNEL_EXECVE
+#define __ARCH_WANT_SYS_FORK
+#define __ARCH_WANT_SYS_VFORK
 
 /*
  * "Conditional" syscalls