Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 398 insertions, 0 deletions

diff --git a/arch/m68k/mac/debug.c b/arch/m68k/mac/debug.c
new file mode 100644
index 00000000000..cc62ed61cda
--- /dev/null
+++ b/arch/m68k/mac/debug.c
@@ -0,0 +1,398 @@
+/*
+ * linux/arch/m68k/mac/debug.c
+ *
+ * Shamelessly stolen (SCC code and general framework) from:
+ *
+ * linux/arch/m68k/atari/debug.c
+ *
+ * Atari debugging and serial console stuff
+ *
+ * Assembled of parts of former atari/config.c 97-12-18 by Roman Hodek
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/tty.h>
+#include <linux/console.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+
+#define BOOTINFO_COMPAT_1_0
+#include <asm/setup.h>
+#include <asm/bootinfo.h>
+#include <asm/machw.h>
+#include <asm/macints.h>
+
+extern char m68k_debug_device[];
+
+extern struct compat_bootinfo compat_boot_info;
+
+extern unsigned long mac_videobase;
+extern unsigned long mac_videodepth;
+extern unsigned long mac_rowbytes;
+
+extern void mac_serial_print(const char *);
+
+#define DEBUG_HEADS
+#undef DEBUG_SCREEN
+#define DEBUG_SERIAL
+
+/*
+ * These two auxiliary debug functions should go away ASAP. Only usage:
+ * before the console output is up (after head.S come some other crucial
+ * setup routines :-) it permits writing 'data' to the screen as bit patterns
+ * (good luck reading those). Helped to figure that the bootinfo contained
+ * garbage data on the amount and size of memory chunks ...
+ *
+ * The 'pos' argument now simply means 'linefeed after print' ...
+ */
+
+#ifdef DEBUG_SCREEN
+static int peng=0, line=0;
+#endif
+
+void mac_debugging_short(int pos, short num)
+{
+#ifdef DEBUG_SCREEN
+	unsigned char *pengoffset;
+	unsigned char *pptr;
+	int i;
+#endif
+
+#ifdef DEBUG_SERIAL
+	printk("debug: %d !\n", num);
+#endif
+
+#ifdef DEBUG_SCREEN
+	if (!MACH_IS_MAC) {
+		/* printk("debug: %d !\n", num); */
+		return;
+	}
+
+	/* calculate current offset */
+	pengoffset=(unsigned char *)(mac_videobase+(150+line*2)*mac_rowbytes)
+		    +80*peng;
+
+	pptr=pengoffset;
+
+	for(i=0;i<8*sizeof(short);i++) /* # of bits */
+	{
+		/*        value        mask for bit i, reverse order */
+		*pptr++ = (num & ( 1 << (8*sizeof(short)-i-1) ) ? 0xFF : 0x00);
+	}
+
+	peng++;
+
+	if (pos) {
+		line++;
+		peng = 0;
+	}
+#endif
+}
+
+void mac_debugging_long(int pos, long addr)
+{
+#ifdef DEBUG_SCREEN
+	unsigned char *pengoffset;
+	unsigned char *pptr;
+	int i;
+#endif
+
+#ifdef DEBUG_SERIAL
+	printk("debug: #%ld !\n", addr);
+#endif
+
+#ifdef DEBUG_SCREEN
+	if (!MACH_IS_MAC) {
+		/* printk("debug: #%ld !\n", addr); */
+		return;
+	}
+
+	pengoffset=(unsigned char *)(mac_videobase+(150+line*2)*mac_rowbytes)
+		    +80*peng;
+
+	pptr=pengoffset;
+
+	for(i=0;i<8*sizeof(long);i++) /* # of bits */
+	{
+		*pptr++ = (addr & ( 1 << (8*sizeof(long)-i-1) ) ? 0xFF : 0x00);
+	}
+
+	peng++;
+
+	if (pos) {
+		line++;
+		peng = 0;
+	}
+#endif
+}
+
+#ifdef DEBUG_SERIAL
+/*
+ * TODO: serial debug code
+ */
+
+struct mac_SCC
+ {
+  u_char cha_b_ctrl;
+  u_char char_dummy1;
+  u_char cha_a_ctrl;
+  u_char char_dummy2;
+  u_char cha_b_data;
+  u_char char_dummy3;
+  u_char cha_a_data;
+ };
+
+# define scc (*((volatile struct mac_SCC*)mac_bi_data.sccbase))
+
+/* Flag that serial port is already initialized and used */
+int mac_SCC_init_done;
+/* Can be set somewhere, if a SCC master reset has already be done and should
+ * not be repeated; used by kgdb */
+int mac_SCC_reset_done;
+
+static int scc_port = -1;
+
+static struct console mac_console_driver = {
+	.name =		"debug",
+	.flags =	CON_PRINTBUFFER,
+	.index =	-1,
+};
+
+/*
+ * Crude hack to get console output to the screen before the framebuffer
+ * is initialized (happens a lot later in 2.1!).
+ * We just use the console routines declared in head.S, this will interfere
+ * with regular framebuffer console output and should be used exclusively
+ * to debug kernel problems manifesting before framebuffer init (aka WSOD)
+ *
+ * To keep this hack from interfering with the regular console driver, either
+ * deregister this driver before/on framebuffer console init, or silence this
+ * function after the fbcon driver is running (will lose console messages!?).
+ * To debug real early bugs, need to write a 'mac_register_console_hack()'
+ * that is called from start_kernel() before setup_arch() and just registers
+ * this driver if Mac.
+ */
+
+void mac_debug_console_write (struct console *co, const char *str,
+			      unsigned int count)
+{
+	mac_serial_print(str);
+}
+
+
+
+/* Mac: loops_per_jiffy min. 19000 ^= .5 us; MFPDELAY was 0.6 us*/
+
+#define uSEC 1
+
+static inline void mac_sccb_out (char c)
+{
+    int i;
+    do {
+	for( i = uSEC; i > 0; --i )
+		barrier();
+    } while (!(scc.cha_b_ctrl & 0x04)); /* wait for tx buf empty */
+    for( i = uSEC; i > 0; --i )
+	barrier();
+    scc.cha_b_data = c;
+}
+
+static inline void mac_scca_out (char c)
+{
+    int i;
+    do {
+	for( i = uSEC; i > 0; --i )
+		barrier();
+    } while (!(scc.cha_a_ctrl & 0x04)); /* wait for tx buf empty */
+    for( i = uSEC; i > 0; --i )
+	barrier();
+    scc.cha_a_data = c;
+}
+
+void mac_sccb_console_write (struct console *co, const char *str,
+			      unsigned int count)
+{
+    while (count--) {
+	if (*str == '\n')
+	    mac_sccb_out( '\r' );
+	mac_sccb_out( *str++ );
+    }
+}
+
+void mac_scca_console_write (struct console *co, const char *str,
+			      unsigned int count)
+{
+    while (count--) {
+	if (*str == '\n')
+	    mac_scca_out( '\r' );
+	mac_scca_out( *str++ );
+    }
+}
+
+
+/* The following two functions do a quick'n'dirty initialization of the MFP or
+ * SCC serial ports. They're used by the debugging interface, kgdb, and the
+ * serial console code. */
+#define SCCB_WRITE(reg,val)				\
+    do {						\
+	int i;						\
+	scc.cha_b_ctrl = (reg);				\
+	for( i = uSEC; i > 0; --i )			\
+		barrier();				\
+	scc.cha_b_ctrl = (val);				\
+	for( i = uSEC; i > 0; --i )			\
+		barrier();				\
+    } while(0)
+
+#define SCCA_WRITE(reg,val)				\
+    do {						\
+	int i;						\
+	scc.cha_a_ctrl = (reg);				\
+	for( i = uSEC; i > 0; --i )			\
+		barrier();				\
+	scc.cha_a_ctrl = (val);				\
+	for( i = uSEC; i > 0; --i )			\
+		barrier();				\
+    } while(0)
+
+/* loops_per_jiffy isn't initialized yet, so we can't use udelay(). This does a
+ * delay of ~ 60us. */
+/* Mac: loops_per_jiffy min. 19000 ^= .5 us; MFPDELAY was 0.6 us*/
+#define LONG_DELAY()				\
+    do {					\
+	int i;					\
+	for( i = 60*uSEC; i > 0; --i )		\
+	    barrier();				\
+    } while(0)
+
+#ifndef CONFIG_SERIAL_CONSOLE
+static void __init mac_init_scc_port( int cflag, int port )
+#else
+void mac_init_scc_port( int cflag, int port )
+#endif
+{
+	extern int mac_SCC_reset_done;
+
+	/*
+	 * baud rates: 1200, 1800, 2400, 4800, 9600, 19.2k, 38.4k, 57.6k, 115.2k
+	 */
+
+	static int clksrc_table[9] =
+		/* reg 11: 0x50 = BRG, 0x00 = RTxC, 0x28 = TRxC */
+		{ 0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x00, 0x00 };
+	static int clkmode_table[9] =
+		/* reg 4: 0x40 = x16, 0x80 = x32, 0xc0 = x64 */
+		{ 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0xc0, 0x80 };
+	static int div_table[9] =
+		/* reg12 (BRG low) */
+		{ 94, 62, 46, 22, 10, 4, 1, 0, 0 };
+
+    int baud = cflag & CBAUD;
+    int clksrc, clkmode, div, reg3, reg5;
+
+    if (cflag & CBAUDEX)
+	baud += B38400;
+    if (baud < B1200 || baud > B38400+2)
+	baud = B9600; /* use default 9600bps for non-implemented rates */
+    baud -= B1200; /* tables starts at 1200bps */
+
+    clksrc  = clksrc_table[baud];
+    clkmode = clkmode_table[baud];
+    div     = div_table[baud];
+
+    reg3 = (((cflag & CSIZE) == CS8) ? 0xc0 : 0x40);
+    reg5 = (((cflag & CSIZE) == CS8) ? 0x60 : 0x20) | 0x82 /* assert DTR/RTS */;
+
+    if (port == 1) {
+	    (void)scc.cha_b_ctrl;	/* reset reg pointer */
+	    SCCB_WRITE( 9, 0xc0 );	/* reset */
+	    LONG_DELAY();		/* extra delay after WR9 access */
+	    SCCB_WRITE( 4, (cflag & PARENB) ? ((cflag & PARODD) ? 0x01 : 0x03) : 0 |
+			  0x04 /* 1 stopbit */ |
+			  clkmode );
+	    SCCB_WRITE( 3, reg3 );
+	    SCCB_WRITE( 5, reg5 );
+	    SCCB_WRITE( 9, 0 );		/* no interrupts */
+	    LONG_DELAY();		/* extra delay after WR9 access */
+	    SCCB_WRITE( 10, 0 );	/* NRZ mode */
+	    SCCB_WRITE( 11, clksrc );	/* main clock source */
+	    SCCB_WRITE( 12, div );	/* BRG value */
+	    SCCB_WRITE( 13, 0 );		/* BRG high byte */
+	    SCCB_WRITE( 14, 1 );
+	    SCCB_WRITE( 3, reg3 | 1 );
+	    SCCB_WRITE( 5, reg5 | 8 );
+    } else if (port == 0) {
+	    (void)scc.cha_a_ctrl;	/* reset reg pointer */
+	    SCCA_WRITE( 9, 0xc0 );	/* reset */
+	    LONG_DELAY();		/* extra delay after WR9 access */
+	    SCCA_WRITE( 4, (cflag & PARENB) ? ((cflag & PARODD) ? 0x01 : 0x03) : 0 |
+			  0x04 /* 1 stopbit */ |
+			  clkmode );
+	    SCCA_WRITE( 3, reg3 );
+	    SCCA_WRITE( 5, reg5 );
+	    SCCA_WRITE( 9, 0 );		/* no interrupts */
+	    LONG_DELAY();		/* extra delay after WR9 access */
+	    SCCA_WRITE( 10, 0 );	/* NRZ mode */
+	    SCCA_WRITE( 11, clksrc );	/* main clock source */
+	    SCCA_WRITE( 12, div );	/* BRG value */
+	    SCCA_WRITE( 13, 0 );		/* BRG high byte */
+	    SCCA_WRITE( 14, 1 );
+	    SCCA_WRITE( 3, reg3 | 1 );
+	    SCCA_WRITE( 5, reg5 | 8 );
+    }
+
+    mac_SCC_reset_done = 1;
+    mac_SCC_init_done = 1;
+}
+#endif /* DEBUG_SERIAL */
+
+void mac_init_scca_port( int cflag )
+{
+	mac_init_scc_port(cflag, 0);
+}
+
+void mac_init_sccb_port( int cflag )
+{
+	mac_init_scc_port(cflag, 1);
+}
+
+void __init mac_debug_init(void)
+{
+#ifdef DEBUG_SERIAL
+    if (   !strcmp( m68k_debug_device, "ser"  )
+        || !strcmp( m68k_debug_device, "ser1" )) {
+	/* Mac modem port */
+	mac_init_scc_port( B9600|CS8, 0 );
+	mac_console_driver.write = mac_scca_console_write;
+	scc_port = 0;
+    }
+    else if (!strcmp( m68k_debug_device, "ser2" )) {
+	/* Mac printer port */
+	mac_init_scc_port( B9600|CS8, 1 );
+	mac_console_driver.write = mac_sccb_console_write;
+	scc_port = 1;
+    }
+#endif
+#ifdef DEBUG_HEADS
+    if (   !strcmp( m68k_debug_device, "scn"  )
+        || !strcmp( m68k_debug_device, "con" )) {
+	/* display, using head.S console routines */
+	mac_console_driver.write = mac_debug_console_write;
+    }
+#endif
+    if (mac_console_driver.write)
+	register_console(&mac_console_driver);
+}
+
+/*
+ * Local variables:
+ *  c-indent-level: 4
+ *  tab-width: 8
+ * End:
+ */