m68k/mac: Optimize interrupts using chain handlers

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>

1 files changed, 57 insertions, 17 deletions

diff --git a/arch/m68k/mac/psc.c b/arch/m68k/mac/psc.c
index 0a34b7afc37..52840b8c03b 100644
--- a/arch/m68k/mac/psc.c
+++ b/arch/m68k/mac/psc.c
@@ -33,8 +33,6 @@
 int psc_present;
 volatile __u8 *psc;
 
-irqreturn_t psc_irq(int, void *);
-
 /*
  * Debugging dump, used in various places to see what's going on.
  */
@@ -115,26 +113,40 @@ void __init psc_init(void)
 }
 
 /*
- * Register the PSC interrupt dispatchers for autovector interrupts 3-6.
+ * PSC interrupt handler. It's a lot like the VIA interrupt handler.
  */
 
-void __init psc_register_interrupts(void)
+#ifdef CONFIG_GENERIC_HARDIRQS
+static void psc_irq(unsigned int irq, struct irq_desc *desc)
 {
-	if (request_irq(IRQ_AUTO_3, psc_irq, 0, "psc3", (void *) 0x30))
-		pr_err("Couldn't register psc%d interrupt\n", 3);
-	if (request_irq(IRQ_AUTO_4, psc_irq, 0, "psc4", (void *) 0x40))
-		pr_err("Couldn't register psc%d interrupt\n", 4);
-	if (request_irq(IRQ_AUTO_5, psc_irq, 0, "psc5", (void *) 0x50))
-		pr_err("Couldn't register psc%d interrupt\n", 5);
-	if (request_irq(IRQ_AUTO_6, psc_irq, 0, "psc6", (void *) 0x60))
-		pr_err("Couldn't register psc%d interrupt\n", 6);
-}
+	unsigned int offset = (unsigned int)irq_desc_get_handler_data(desc);
+	int pIFR	= pIFRbase + offset;
+	int pIER	= pIERbase + offset;
+	int irq_num;
+	unsigned char irq_bit, events;
 
-/*
- * PSC interrupt handler. It's a lot like the VIA interrupt handler.
- */
+#ifdef DEBUG_IRQS
+	printk("psc_irq: irq %u pIFR = 0x%02X pIER = 0x%02X\n",
+		irq, (int) psc_read_byte(pIFR), (int) psc_read_byte(pIER));
+#endif
 
-irqreturn_t psc_irq(int irq, void *dev_id)
+	events = psc_read_byte(pIFR) & psc_read_byte(pIER) & 0xF;
+	if (!events)
+		return;
+
+	irq_num = irq << 3;
+	irq_bit = 1;
+	do {
+		if (events & irq_bit) {
+			psc_write_byte(pIFR, irq_bit);
+			generic_handle_irq(irq_num);
+		}
+		irq_num++;
+		irq_bit <<= 1;
+	} while (events >= irq_bit);
+}
+#else
+static irqreturn_t psc_irq(int irq, void *dev_id)
 {
 	int pIFR	= pIFRbase + ((int) dev_id);
 	int pIER	= pIERbase + ((int) dev_id);
@@ -162,6 +174,34 @@ irqreturn_t psc_irq(int irq, void *dev_id)
 	} while (events >= irq_bit);
 	return IRQ_HANDLED;
 }
+#endif
+
+/*
+ * Register the PSC interrupt dispatchers for autovector interrupts 3-6.
+ */
+
+void __init psc_register_interrupts(void)
+{
+#ifdef CONFIG_GENERIC_HARDIRQS
+	irq_set_chained_handler(IRQ_AUTO_3, psc_irq);
+	irq_set_handler_data(IRQ_AUTO_3, (void *)0x30);
+	irq_set_chained_handler(IRQ_AUTO_4, psc_irq);
+	irq_set_handler_data(IRQ_AUTO_4, (void *)0x40);
+	irq_set_chained_handler(IRQ_AUTO_5, psc_irq);
+	irq_set_handler_data(IRQ_AUTO_5, (void *)0x50);
+	irq_set_chained_handler(IRQ_AUTO_6, psc_irq);
+	irq_set_handler_data(IRQ_AUTO_6, (void *)0x60);
+#else /* !CONFIG_GENERIC_HARDIRQS */
+	if (request_irq(IRQ_AUTO_3, psc_irq, 0, "psc3", (void *) 0x30))
+		pr_err("Couldn't register psc%d interrupt\n", 3);
+	if (request_irq(IRQ_AUTO_4, psc_irq, 0, "psc4", (void *) 0x40))
+		pr_err("Couldn't register psc%d interrupt\n", 4);
+	if (request_irq(IRQ_AUTO_5, psc_irq, 0, "psc5", (void *) 0x50))
+		pr_err("Couldn't register psc%d interrupt\n", 5);
+	if (request_irq(IRQ_AUTO_6, psc_irq, 0, "psc6", (void *) 0x60))
+		pr_err("Couldn't register psc%d interrupt\n", 6);
+#endif /* !CONFIG_GENERIC_HARDIRQS */
+}
 
 void psc_irq_enable(int irq) {
 	int irq_src	= IRQ_SRC(irq);