m68knommu: merge common ColdFire QSPI platform setup code

The ColdFire QSPI is common to quite a few ColdFire CPUs. No need to duplicate
its platform setup code for every CPU family member that has it. Merge all the
setup code into a single shared file.

This also results in few platforms no longer needing any local platform
setup code. In those cases remove the empty devices array and initcall
code as well.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>

1 files changed, 3 insertions, 162 deletions

diff --git a/arch/m68k/platform/527x/config.c b/arch/m68k/platform/527x/config.c
index e86ff3a0ba1..9bdf522d9f0 100644
--- a/arch/m68k/platform/527x/config.c
+++ b/arch/m68k/platform/527x/config.c
@@ -16,158 +16,14 @@
 #include <linux/param.h>
 #include <linux/init.h>
 #include <linux/io.h>
-#include <linux/spi/spi.h>
-#include <linux/gpio.h>
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
 #include <asm/mcfuart.h>
-#include <asm/mcfqspi.h>
 
 /***************************************************************************/
 
-#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
-static struct resource m527x_qspi_resources[] = {
-	{
-		.start		= MCFQSPI_BASE,
-		.end		= MCFQSPI_BASE + MCFQSPI_SIZE - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= MCF_IRQ_QSPI,
-		.end		= MCF_IRQ_QSPI,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static int m527x_cs_setup(struct mcfqspi_cs_control *cs_control)
-{
-	int status;
-
-	status = gpio_request(MCFQSPI_CS0, "MCFQSPI_CS0");
-	if (status) {
-		pr_debug("gpio_request for MCFQSPI_CS0 failed\n");
-		goto fail0;
-	}
-	status = gpio_direction_output(MCFQSPI_CS0, 1);
-	if (status) {
-		pr_debug("gpio_direction_output for MCFQSPI_CS0 failed\n");
-		goto fail1;
-	}
-
-	status = gpio_request(MCFQSPI_CS1, "MCFQSPI_CS1");
-	if (status) {
-		pr_debug("gpio_request for MCFQSPI_CS1 failed\n");
-		goto fail1;
-	}
-	status = gpio_direction_output(MCFQSPI_CS1, 1);
-	if (status) {
-		pr_debug("gpio_direction_output for MCFQSPI_CS1 failed\n");
-		goto fail2;
-	}
-
-	status = gpio_request(MCFQSPI_CS2, "MCFQSPI_CS2");
-	if (status) {
-		pr_debug("gpio_request for MCFQSPI_CS2 failed\n");
-		goto fail2;
-	}
-	status = gpio_direction_output(MCFQSPI_CS2, 1);
-	if (status) {
-		pr_debug("gpio_direction_output for MCFQSPI_CS2 failed\n");
-		goto fail3;
-	}
-
-	status = gpio_request(MCFQSPI_CS3, "MCFQSPI_CS3");
-	if (status) {
-		pr_debug("gpio_request for MCFQSPI_CS3 failed\n");
-		goto fail3;
-	}
-	status = gpio_direction_output(MCFQSPI_CS3, 1);
-	if (status) {
-		pr_debug("gpio_direction_output for MCFQSPI_CS3 failed\n");
-		goto fail4;
-	}
-
-	return 0;
-
-fail4:
-	gpio_free(MCFQSPI_CS3);
-fail3:
-	gpio_free(MCFQSPI_CS2);
-fail2:
-	gpio_free(MCFQSPI_CS1);
-fail1:
-	gpio_free(MCFQSPI_CS0);
-fail0:
-	return status;
-}
-
-static void m527x_cs_teardown(struct mcfqspi_cs_control *cs_control)
-{
-	gpio_free(MCFQSPI_CS3);
-	gpio_free(MCFQSPI_CS2);
-	gpio_free(MCFQSPI_CS1);
-	gpio_free(MCFQSPI_CS0);
-}
-
-static void m527x_cs_select(struct mcfqspi_cs_control *cs_control,
-			    u8 chip_select, bool cs_high)
-{
-	switch (chip_select) {
-	case 0:
-		gpio_set_value(MCFQSPI_CS0, cs_high);
-		break;
-	case 1:
-		gpio_set_value(MCFQSPI_CS1, cs_high);
-		break;
-	case 2:
-		gpio_set_value(MCFQSPI_CS2, cs_high);
-		break;
-	case 3:
-		gpio_set_value(MCFQSPI_CS3, cs_high);
-		break;
-	}
-}
-
-static void m527x_cs_deselect(struct mcfqspi_cs_control *cs_control,
-			      u8 chip_select, bool cs_high)
-{
-	switch (chip_select) {
-	case 0:
-		gpio_set_value(MCFQSPI_CS0, !cs_high);
-		break;
-	case 1:
-		gpio_set_value(MCFQSPI_CS1, !cs_high);
-		break;
-	case 2:
-		gpio_set_value(MCFQSPI_CS2, !cs_high);
-		break;
-	case 3:
-		gpio_set_value(MCFQSPI_CS3, !cs_high);
-		break;
-	}
-}
-
-static struct mcfqspi_cs_control m527x_cs_control = {
-	.setup                  = m527x_cs_setup,
-	.teardown               = m527x_cs_teardown,
-	.select                 = m527x_cs_select,
-	.deselect               = m527x_cs_deselect,
-};
-
-static struct mcfqspi_platform_data m527x_qspi_data = {
-	.bus_num		= 0,
-	.num_chipselect		= 4,
-	.cs_control		= &m527x_cs_control,
-};
-
-static struct platform_device m527x_qspi = {
-	.name			= "mcfqspi",
-	.id			= 0,
-	.num_resources		= ARRAY_SIZE(m527x_qspi_resources),
-	.resource		= m527x_qspi_resources,
-	.dev.platform_data	= &m527x_qspi_data,
-};
+#ifdef CONFIG_SPI_COLDFIRE_QSPI
 
 static void __init m527x_qspi_init(void)
 {
@@ -185,13 +41,8 @@ static void __init m527x_qspi_init(void)
 	writew(0x003e, MCFGPIO_PAR_QSPI);
 #endif
 }
-#endif /* defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) */
 
-static struct platform_device *m527x_devices[] __initdata = {
-#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
-	&m527x_qspi,
-#endif
-};
+#endif /* CONFIG_SPI_COLDFIRE_QSPI */
 
 /***************************************************************************/
 
@@ -250,19 +101,9 @@ void __init config_BSP(char *commandp, int size)
 	mach_sched_init = hw_timer_init;
 	m527x_uarts_init();
 	m527x_fec_init();
-#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
+#ifdef CONFIG_SPI_COLDFIRE_QSPI
 	m527x_qspi_init();
 #endif
 }
 
 /***************************************************************************/
-
-static int __init init_BSP(void)
-{
-	platform_add_devices(m527x_devices, ARRAY_SIZE(m527x_devices));
-	return 0;
-}
-
-arch_initcall(init_BSP);
-
-/***************************************************************************/