m68k: merge m68k and m68knommu arch directories

There is a lot of common code that could be shared between the m68k
and m68knommu arch branches. It makes sense to merge the two branches
into a single directory structure so that we can more easily share
that common code.

This is a brute force merge, based on a script from Stephen King
<sfking@fdwdc.com>, which was originally written by Arnd Bergmann
<arnd@arndb.de>.

> The script was inspired by the script Sam Ravnborg used to merge the
> includes from m68knommu. For those files common to both arches but
> differing in content, the m68k version of the file is renamed to
> <file>_mm.<ext> and the m68knommu version of the file is moved into the
> corresponding m68k directory and renamed <file>_no.<ext> and a small
> wrapper file <file>.<ext> is used to select between the two version. Files
> that are common to both but don't differ are removed from the m68knommu
> tree and files and directories that are unique to the m68knommu tree are
> moved to the m68k tree. Finally, the arch/m68knommu tree is removed.
>
> To select between the the versions of the files, the wrapper uses
>
> #ifdef CONFIG_MMU
> #include <file>_mm.<ext>
> #else
> #include <file>_no.<ext>
> #endif

On top of this file merge I have done a simplistic merge of m68k and
m68knommu Kconfig, which primarily attempts to keep existing options and
menus in place. Other than a handful of options being moved it produces
identical .config outputs on m68k and m68knommu targets I tested it on.

With this in place there is now quite a bit of scope for merge cleanups
in future patches.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>

1 files changed, 403 insertions, 0 deletions

diff --git a/arch/m68k/platform/68360/head-ram.S b/arch/m68k/platform/68360/head-ram.S
new file mode 100644
index 00000000000..8eb94fb6b97
--- /dev/null
+++ b/arch/m68k/platform/68360/head-ram.S
@@ -0,0 +1,403 @@
+/* arch/m68knommu/platform/68360/head-ram.S
+ *
+ * Startup code for Motorola 68360
+ *
+ * Copyright 2001 (C) SED Systems, a Division of Calian Ltd.
+ * Based on: arch/m68knommu/platform/68328/pilot/crt0_rom.S
+ * Based on: arch/m68knommu/platform/68360/uCquicc/crt0_rom.S, 2.0.38.1.pre7
+ *           uClinux Kernel
+ * Copyright (C) Michael Leslie <mleslie@lineo.com>
+ * Based on: arch/m68knommu/platform/68EZ328/ucsimm/crt0_rom.S
+ * Copyright (C) 1998  D. Jeff Dionne <jeff@uclinux.org>,
+ *
+ */
+#define ASSEMBLY
+
+.global _stext
+.global _start
+
+.global _rambase
+.global _ramvec
+.global _ramstart
+.global _ramend
+
+.global _quicc_base
+.global _periph_base
+
+#define	RAMEND                      (CONFIG_RAMBASE + CONFIG_RAMSIZE)
+#define	ROMEND                      (CONFIG_ROMBASE + CONFIG_ROMSIZE)
+
+#define REGB                        0x1000
+#define PEPAR                       (_dprbase + REGB + 0x0016)
+#define GMR                         (_dprbase + REGB + 0x0040)
+#define OR0                         (_dprbase + REGB + 0x0054)
+#define BR0                         (_dprbase + REGB + 0x0050)
+#define OR1                         (_dprbase + REGB + 0x0064)
+#define BR1                         (_dprbase + REGB + 0x0060)
+#define OR4                         (_dprbase + REGB + 0x0094)
+#define BR4                         (_dprbase + REGB + 0x0090)
+#define OR6                         (_dprbase + REGB + 0x00b4)
+#define BR6                         (_dprbase + REGB + 0x00b0)
+#define OR7                         (_dprbase + REGB + 0x00c4)
+#define BR7                         (_dprbase + REGB + 0x00c0)
+
+#define MCR                         (_dprbase + REGB + 0x0000)
+#define AVR                         (_dprbase + REGB + 0x0008)
+
+#define SYPCR                       (_dprbase + REGB + 0x0022)
+
+#define PLLCR                       (_dprbase + REGB + 0x0010)
+#define CLKOCR                      (_dprbase + REGB + 0x000C)
+#define CDVCR                       (_dprbase + REGB + 0x0014)
+
+#define BKAR                        (_dprbase + REGB + 0x0030)
+#define BKCR                        (_dprbase + REGB + 0x0034)
+#define SWIV                        (_dprbase + REGB + 0x0023)
+#define PICR                        (_dprbase + REGB + 0x0026)
+#define PITR                        (_dprbase + REGB + 0x002A)
+
+/* Define for all memory configuration */
+#define MCU_SIM_GMR                 0x00000000
+#define SIM_OR_MASK                 0x0fffffff
+
+/* Defines for chip select zero - the flash */
+#define SIM_OR0_MASK                0x20000002
+#define SIM_BR0_MASK                0x00000001
+
+
+/* Defines for chip select one - the RAM */
+#define SIM_OR1_MASK                0x10000000
+#define SIM_BR1_MASK                0x00000001
+
+#define MCU_SIM_MBAR_ADRS           0x0003ff00
+#define MCU_SIM_MBAR_BA_MASK        0xfffff000
+#define MCU_SIM_MBAR_AS_MASK        0x00000001
+
+#define MCU_SIM_PEPAR               0x00B4
+    
+#define MCU_DISABLE_INTRPTS         0x2700
+#define MCU_SIM_AVR                 0x00
+    
+#define MCU_SIM_MCR                 0x00005cff
+
+#define MCU_SIM_CLKOCR              0x00
+#define MCU_SIM_PLLCR               0x8000
+#define MCU_SIM_CDVCR               0x0000
+
+#define MCU_SIM_SYPCR               0x0000
+#define MCU_SIM_SWIV                0x00
+#define MCU_SIM_PICR                0x0000
+#define MCU_SIM_PITR                0x0000
+
+
+#include <asm/m68360_regs.h>
+
+	
+/*
+ * By the time this RAM specific code begins to execute, DPRAM
+ * and DRAM should already be mapped and accessible.
+ */
+
+	.text
+_start:
+_stext:
+	nop
+	ori.w	#MCU_DISABLE_INTRPTS, %sr	/* disable interrupts: */
+	/* We should not need to setup the boot stack the reset should do it. */
+	movea.l	#RAMEND, %sp			/*set up stack at the end of DRAM:*/
+
+set_mbar_register:
+	moveq.l	#0x07, %d1			/* Setup MBAR */
+	movec	%d1, %dfc
+
+	lea.l	MCU_SIM_MBAR_ADRS, %a0
+	move.l	#_dprbase, %d0
+	andi.l	#MCU_SIM_MBAR_BA_MASK, %d0
+	ori.l	#MCU_SIM_MBAR_AS_MASK, %d0
+	moves.l	%d0, %a0@
+
+	moveq.l	#0x05, %d1
+	movec.l	%d1, %dfc
+
+	/* Now we can begin to access registers in DPRAM */
+
+set_sim_mcr:
+	/* Set Module Configuration Register */
+	move.l	#MCU_SIM_MCR, MCR
+
+	/* to do:	Determine cause of reset */
+
+	/*
+	 *       configure system clock MC68360 p. 6-40
+	 *       (value +1)*osc/128 = system clock
+	 */
+set_sim_clock:
+	move.w	#MCU_SIM_PLLCR, PLLCR
+	move.b	#MCU_SIM_CLKOCR, CLKOCR
+	move.w	#MCU_SIM_CDVCR, CDVCR
+
+	/* Wait for the PLL to settle */
+	move.w	#16384, %d0
+pll_settle_wait:
+	subi.w	#1, %d0
+	bne	pll_settle_wait
+
+	/* Setup the system protection register, and watchdog timer register */
+	move.b	#MCU_SIM_SWIV, SWIV
+	move.w	#MCU_SIM_PICR, PICR
+	move.w	#MCU_SIM_PITR, PITR
+	move.w	#MCU_SIM_SYPCR, SYPCR
+
+	/* Clear DPRAM - system + parameter */
+	movea.l	#_dprbase, %a0
+	movea.l	#_dprbase+0x2000, %a1
+
+	/* Copy 0 to %a0 until %a0 == %a1 */
+clear_dpram:
+	movel	#0, %a0@+
+	cmpal	%a0, %a1
+	bhi	clear_dpram
+
+configure_memory_controller:    
+	/* Set up Global Memory Register (GMR) */
+	move.l	#MCU_SIM_GMR, %d0
+	move.l	%d0, GMR
+
+configure_chip_select_0:
+	move.l	#RAMEND, %d0
+	subi.l	#__ramstart, %d0
+	subq.l	#0x01, %d0
+	eori.l	#SIM_OR_MASK, %d0
+	ori.l	#SIM_OR0_MASK, %d0
+	move.l	%d0, OR0
+
+	move.l	#__ramstart, %d0
+	ori.l	#SIM_BR0_MASK, %d0
+	move.l	%d0, BR0
+
+configure_chip_select_1:
+	move.l	#ROMEND, %d0
+	subi.l	#__rom_start, %d0
+	subq.l	#0x01, %d0
+	eori.l	#SIM_OR_MASK, %d0
+	ori.l	#SIM_OR1_MASK, %d0
+	move.l	%d0, OR1
+
+	move.l	#__rom_start, %d0
+	ori.l	#SIM_BR1_MASK, %d0
+	move.l	%d0, BR1
+
+	move.w	#MCU_SIM_PEPAR, PEPAR 
+
+	/* point to vector table: */
+	move.l	#_romvec, %a0
+	move.l	#_ramvec, %a1
+copy_vectors:
+	move.l	%a0@, %d0
+	move.l	%d0, %a1@
+	move.l	%a0@, %a1@
+	addq.l	#0x04, %a0
+	addq.l	#0x04, %a1
+	cmp.l	#_start, %a0
+	blt	copy_vectors
+
+	move.l	#_ramvec, %a1
+	movec	%a1, %vbr
+
+
+	/* Copy data segment from ROM to RAM */
+	moveal	#_stext, %a0
+	moveal	#_sdata, %a1
+	moveal	#_edata, %a2
+
+	/* Copy %a0 to %a1 until %a1 == %a2 */
+LD1:
+	move.l	%a0@, %d0
+	addq.l	#0x04, %a0
+	move.l	%d0, %a1@
+	addq.l	#0x04, %a1
+	cmp.l	#_edata, %a1
+	blt     LD1
+
+	moveal	#_sbss, %a0
+	moveal	#_ebss, %a1
+
+	/* Copy 0 to %a0 until %a0 == %a1 */
+L1:
+	movel	#0, %a0@+
+	cmpal	%a0, %a1
+	bhi	L1
+
+load_quicc:
+	move.l	#_dprbase, _quicc_base
+
+store_ram_size:
+	/* Set ram size information */
+	move.l	#_sdata, _rambase
+	move.l	#_ebss, _ramstart
+	move.l	#RAMEND, %d0
+	sub.l	#0x1000, %d0			/* Reserve 4K for stack space.*/
+	move.l	%d0, _ramend			/* Different from RAMEND.*/
+
+	pea	0
+	pea	env
+	pea	%sp@(4)
+	pea	0
+
+	lea	init_thread_union, %a2
+	lea	0x2000(%a2), %sp
+
+lp:
+	jsr	start_kernel
+
+_exit:
+	jmp	_exit
+
+
+	.data
+	.align 4
+env:
+	.long	0
+_quicc_base:
+	.long	0
+_periph_base:
+	.long	0
+_ramvec:
+	.long   0
+_rambase:
+	.long   0
+_ramstart:
+	.long   0
+_ramend:
+	.long   0
+_dprbase:
+	.long	0xffffe000
+
+	.text
+
+    /*
+     * These are the exception vectors at boot up, they are copied into RAM
+     * and then overwritten as needed.
+     */
+ 
+.section ".data..initvect","awx"
+    .long   RAMEND	/* Reset: Initial Stack Pointer                 - 0.  */
+    .long   _start      /* Reset: Initial Program Counter               - 1.  */
+    .long   buserr      /* Bus Error                                    - 2.  */
+    .long   trap        /* Address Error                                - 3.  */
+    .long   trap        /* Illegal Instruction                          - 4.  */
+    .long   trap        /* Divide by zero                               - 5.  */
+    .long   trap        /* CHK, CHK2 Instructions                       - 6.  */
+    .long   trap        /* TRAPcc, TRAPV Instructions                   - 7.  */
+    .long   trap        /* Privilege Violation                          - 8.  */
+    .long   trap        /* Trace                                        - 9.  */
+    .long   trap        /* Line 1010 Emulator                           - 10. */
+    .long   trap        /* Line 1111 Emualtor                           - 11. */
+    .long   trap        /* Harware Breakpoint                           - 12. */
+    .long   trap        /* (Reserved for Coprocessor Protocol Violation)- 13. */
+    .long   trap        /* Format Error                                 - 14. */
+    .long   trap        /* Uninitialized Interrupt                      - 15. */
+    .long   trap        /* (Unassigned, Reserver)                       - 16. */
+    .long   trap        /* (Unassigned, Reserver)                       - 17. */
+    .long   trap        /* (Unassigned, Reserver)                       - 18. */
+    .long   trap        /* (Unassigned, Reserver)                       - 19. */
+    .long   trap        /* (Unassigned, Reserver)                       - 20. */
+    .long   trap        /* (Unassigned, Reserver)                       - 21. */
+    .long   trap        /* (Unassigned, Reserver)                       - 22. */
+    .long   trap        /* (Unassigned, Reserver)                       - 23. */
+    .long   trap        /* Spurious Interrupt                           - 24. */
+    .long   trap        /* Level 1 Interrupt Autovector                 - 25. */
+    .long   trap        /* Level 2 Interrupt Autovector                 - 26. */
+    .long   trap        /* Level 3 Interrupt Autovector                 - 27. */
+    .long   trap        /* Level 4 Interrupt Autovector                 - 28. */
+    .long   trap        /* Level 5 Interrupt Autovector                 - 29. */
+    .long   trap        /* Level 6 Interrupt Autovector                 - 30. */
+    .long   trap        /* Level 7 Interrupt Autovector                 - 31. */
+    .long   system_call /* Trap Instruction Vectors 0                   - 32. */
+    .long   trap        /* Trap Instruction Vectors 1                   - 33. */
+    .long   trap        /* Trap Instruction Vectors 2                   - 34. */
+    .long   trap        /* Trap Instruction Vectors 3                   - 35. */
+    .long   trap        /* Trap Instruction Vectors 4                   - 36. */
+    .long   trap        /* Trap Instruction Vectors 5                   - 37. */
+    .long   trap        /* Trap Instruction Vectors 6                   - 38. */
+    .long   trap        /* Trap Instruction Vectors 7                   - 39. */
+    .long   trap        /* Trap Instruction Vectors 8                   - 40. */
+    .long   trap        /* Trap Instruction Vectors 9                   - 41. */
+    .long   trap        /* Trap Instruction Vectors 10                  - 42. */
+    .long   trap        /* Trap Instruction Vectors 11                  - 43. */
+    .long   trap        /* Trap Instruction Vectors 12                  - 44. */
+    .long   trap        /* Trap Instruction Vectors 13                  - 45. */
+    .long   trap        /* Trap Instruction Vectors 14                  - 46. */
+    .long   trap        /* Trap Instruction Vectors 15                  - 47. */
+    .long   0           /* (Reserved for Coprocessor)                   - 48. */
+    .long   0           /* (Reserved for Coprocessor)                   - 49. */
+    .long   0           /* (Reserved for Coprocessor)                   - 50. */
+    .long   0           /* (Reserved for Coprocessor)                   - 51. */
+    .long   0           /* (Reserved for Coprocessor)                   - 52. */
+    .long   0           /* (Reserved for Coprocessor)                   - 53. */
+    .long   0           /* (Reserved for Coprocessor)                   - 54. */
+    .long   0           /* (Reserved for Coprocessor)                   - 55. */
+    .long   0           /* (Reserved for Coprocessor)                   - 56. */
+    .long   0           /* (Reserved for Coprocessor)                   - 57. */
+    .long   0           /* (Reserved for Coprocessor)                   - 58. */
+    .long   0           /* (Unassigned, Reserved)                       - 59. */
+    .long   0           /* (Unassigned, Reserved)                       - 60. */
+    .long   0           /* (Unassigned, Reserved)                       - 61. */
+    .long   0           /* (Unassigned, Reserved)                       - 62. */
+    .long   0           /* (Unassigned, Reserved)                       - 63. */
+    /*                  The assignment of these vectors to the CPM is         */
+    /*                  dependent on the configuration of the CPM vba         */
+    /*                          fields.                                       */
+    .long   0           /* (User-Defined Vectors 1) CPM Error           - 64. */
+    .long   0           /* (User-Defined Vectors 2) CPM Parallel IO PC11- 65. */
+    .long   0           /* (User-Defined Vectors 3) CPM Parallel IO PC10- 66. */
+    .long   0           /* (User-Defined Vectors 4) CPM SMC2 / PIP      - 67. */
+    .long   0           /* (User-Defined Vectors 5) CPM SMC1            - 68. */
+    .long   0           /* (User-Defined Vectors 6) CPM SPI             - 69. */
+    .long   0           /* (User-Defined Vectors 7) CPM Parallel IO PC9 - 70. */
+    .long   0           /* (User-Defined Vectors 8) CPM Timer 4         - 71. */
+    .long   0           /* (User-Defined Vectors 9) CPM Reserved        - 72. */
+    .long   0           /* (User-Defined Vectors 10) CPM Parallel IO PC8- 73. */
+    .long   0           /* (User-Defined Vectors 11) CPM Parallel IO PC7- 74. */
+    .long   0           /* (User-Defined Vectors 12) CPM Parallel IO PC6- 75. */
+    .long   0           /* (User-Defined Vectors 13) CPM Timer 3        - 76. */
+    .long   0           /* (User-Defined Vectors 14) CPM Reserved       - 77. */
+    .long   0           /* (User-Defined Vectors 15) CPM Parallel IO PC5- 78. */
+    .long   0           /* (User-Defined Vectors 16) CPM Parallel IO PC4- 79. */
+    .long   0           /* (User-Defined Vectors 17) CPM Reserved       - 80. */
+    .long   0           /* (User-Defined Vectors 18) CPM RISC Timer Tbl - 81. */
+    .long   0           /* (User-Defined Vectors 19) CPM Timer 2        - 82. */
+    .long   0           /* (User-Defined Vectors 21) CPM Reserved       - 83. */
+    .long   0           /* (User-Defined Vectors 22) CPM IDMA2          - 84. */
+    .long   0           /* (User-Defined Vectors 23) CPM IDMA1          - 85. */
+    .long   0           /* (User-Defined Vectors 24) CPM SDMA Bus Err   - 86. */
+    .long   0           /* (User-Defined Vectors 25) CPM Parallel IO PC3- 87. */
+    .long   0           /* (User-Defined Vectors 26) CPM Parallel IO PC2- 88. */
+    .long   0           /* (User-Defined Vectors 27) CPM Timer 1        - 89. */
+    .long   0           /* (User-Defined Vectors 28) CPM Parallel IO PC1- 90. */
+    .long   0           /* (User-Defined Vectors 29) CPM SCC 4          - 91. */
+    .long   0           /* (User-Defined Vectors 30) CPM SCC 3          - 92. */
+    .long   0           /* (User-Defined Vectors 31) CPM SCC 2          - 93. */
+    .long   0           /* (User-Defined Vectors 32) CPM SCC 1          - 94. */
+    .long   0           /* (User-Defined Vectors 33) CPM Parallel IO PC0- 95. */
+    /*                  I don't think anything uses the vectors after here.   */
+    .long   0           /* (User-Defined Vectors 34)                    - 96. */
+    .long   0,0,0,0,0               /* (User-Defined Vectors 35  -  39). */
+    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 40  -  49). */
+    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 50  -  59). */
+    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 60  -  69). */
+    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 70  -  79). */
+    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 80  -  89). */
+    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 90  -  99). */
+    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 100 - 109). */
+    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 110 - 119). */
+    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 120 - 129). */
+    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 130 - 139). */
+    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 140 - 149). */
+    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 150 - 159). */
+    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 160 - 169). */
+    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 170 - 179). */
+    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 180 - 189). */
+    .long   0,0,0                   /* (User-Defined Vectors 190 - 192). */
+.text
+ignore: rte