m68knommu: Add support for the Coldfire m5441x.

Add support for the Coldfire 5441x (54410/54415/54416/54417/54418).  Currently
we only support noMMU mode.  It requires the PIT patch posted previously as it
uses the PIT instead of the dma timer as a clock source so we can get all that
GENERIC_CLOCKEVENTS goodness.  It also adds some simple clk definitions and
very simple minded power management.  The gpio code is tweeked and some
additional devices are added to devices.c.  The Makefile uses -mv4e as
apparently, the only difference a v4m (m5441x) and a v4e is the later has a
FPU, which I don't think should matter to us in the kernel.

Signed-off-by: Steven King <sfking@fdwdc.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>

1 files changed, 54 insertions, 3 deletions

diff --git a/arch/m68k/platform/coldfire/device.c b/arch/m68k/platform/coldfire/device.c
index 3aa77ddea89..81f0fb5e51c 100644
--- a/arch/m68k/platform/coldfire/device.c
+++ b/arch/m68k/platform/coldfire/device.c
@@ -13,6 +13,7 @@
 #include <linux/io.h>
 #include <linux/spi/spi.h>
 #include <linux/gpio.h>
+#include <linux/fec.h>
 #include <asm/traps.h>
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
@@ -20,7 +21,7 @@
 #include <asm/mcfqspi.h>
 
 /*
- *	All current ColdFire parts contain from 2, 3 or 4 UARTS.
+ *	All current ColdFire parts contain from 2, 3, 4 or 10 UARTS.
  */
 static struct mcf_platform_uart mcf_uart_platform_data[] = {
 	{
@@ -43,6 +44,42 @@ static struct mcf_platform_uart mcf_uart_platform_data[] = {
 		.irq		= MCF_IRQ_UART3,
 	},
 #endif
+#ifdef MCFUART_BASE4
+	{
+		.mapbase	= MCFUART_BASE4,
+		.irq		= MCF_IRQ_UART4,
+	},
+#endif
+#ifdef MCFUART_BASE5
+	{
+		.mapbase	= MCFUART_BASE5,
+		.irq		= MCF_IRQ_UART5,
+	},
+#endif
+#ifdef MCFUART_BASE6
+	{
+		.mapbase	= MCFUART_BASE6,
+		.irq		= MCF_IRQ_UART6,
+	},
+#endif
+#ifdef MCFUART_BASE7
+	{
+		.mapbase	= MCFUART_BASE7,
+		.irq		= MCF_IRQ_UART7,
+	},
+#endif
+#ifdef MCFUART_BASE8
+	{
+		.mapbase	= MCFUART_BASE8,
+		.irq		= MCF_IRQ_UART8,
+	},
+#endif
+#ifdef MCFUART_BASE9
+	{
+		.mapbase	= MCFUART_BASE9,
+		.irq		= MCF_IRQ_UART9,
+	},
+#endif
 	{ },
 };
 
@@ -53,6 +90,18 @@ static struct platform_device mcf_uart = {
 };
 
 #ifdef CONFIG_FEC
+
+#ifdef CONFIG_M5441x
+#define FEC_NAME	"enet-fec"
+static struct fec_platform_data fec_pdata = {
+	.phy		= PHY_INTERFACE_MODE_RMII,
+};
+#define FEC_PDATA	(&fec_pdata)
+#else
+#define FEC_NAME	"fec"
+#define FEC_PDATA	NULL
+#endif
+
 /*
  *	Some ColdFire cores contain the Fast Ethernet Controller (FEC)
  *	block. It is Freescale's own hardware block. Some ColdFires
@@ -82,10 +131,11 @@ static struct resource mcf_fec0_resources[] = {
 };
 
 static struct platform_device mcf_fec0 = {
-	.name			= "fec",
+	.name			= FEC_NAME,
 	.id			= 0,
 	.num_resources		= ARRAY_SIZE(mcf_fec0_resources),
 	.resource		= mcf_fec0_resources,
+	.dev.platform_data	= FEC_PDATA,
 };
 
 #ifdef MCFFEC_BASE1
@@ -113,10 +163,11 @@ static struct resource mcf_fec1_resources[] = {
 };
 
 static struct platform_device mcf_fec1 = {
-	.name			= "fec",
+	.name			= FEC_NAME,
 	.id			= 1,
 	.num_resources		= ARRAY_SIZE(mcf_fec1_resources),
 	.resource		= mcf_fec1_resources,
+	.dev.platform_data	= FEC_PDATA,
 };
 #endif /* MCFFEC_BASE1 */
 #endif /* CONFIG_FEC */