m68k: merge m68k and m68knommu arch directories

There is a lot of common code that could be shared between the m68k
and m68knommu arch branches. It makes sense to merge the two branches
into a single directory structure so that we can more easily share
that common code.

This is a brute force merge, based on a script from Stephen King
<sfking@fdwdc.com>, which was originally written by Arnd Bergmann
<arnd@arndb.de>.

> The script was inspired by the script Sam Ravnborg used to merge the
> includes from m68knommu. For those files common to both arches but
> differing in content, the m68k version of the file is renamed to
> <file>_mm.<ext> and the m68knommu version of the file is moved into the
> corresponding m68k directory and renamed <file>_no.<ext> and a small
> wrapper file <file>.<ext> is used to select between the two version. Files
> that are common to both but don't differ are removed from the m68knommu
> tree and files and directories that are unique to the m68knommu tree are
> moved to the m68k tree. Finally, the arch/m68knommu tree is removed.
>
> To select between the the versions of the files, the wrapper uses
>
> #ifdef CONFIG_MMU
> #include <file>_mm.<ext>
> #else
> #include <file>_no.<ext>
> #endif

On top of this file merge I have done a simplistic merge of m68k and
m68knommu Kconfig, which primarily attempts to keep existing options and
menus in place. Other than a handful of options being moved it produces
identical .config outputs on m68k and m68knommu targets I tested it on.

With this in place there is now quite a bit of scope for merge cleanups
in future patches.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>

16 files changed, 1980 insertions, 0 deletions

diff --git a/arch/m68k/platform/coldfire/Makefile b/arch/m68k/platform/coldfire/Makefile
new file mode 100644
index 00000000000..a8967baabd7
--- /dev/null
+++ b/arch/m68k/platform/coldfire/Makefile
@@ -0,0 +1,32 @@
+#
+# Makefile for the m68knommu kernel.
+#
+
+#
+# If you want to play with the HW breakpoints then you will
+# need to add define this,  which will give you a stack backtrace
+# on the console port whenever a DBG interrupt occurs. You have to
+# set up you HW breakpoints to trigger a DBG interrupt:
+#
+# ccflags-y := -DTRAP_DBG_INTERRUPT
+# asflags-y := -DTRAP_DBG_INTERRUPT
+#
+
+asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
+
+obj-$(CONFIG_COLDFIRE)	+= cache.o clk.o dma.o entry.o vectors.o
+obj-$(CONFIG_M5206)	+= timers.o intc.o
+obj-$(CONFIG_M5206e)	+= timers.o intc.o
+obj-$(CONFIG_M520x)	+= pit.o intc-simr.o
+obj-$(CONFIG_M523x)	+= pit.o dma_timer.o intc-2.o
+obj-$(CONFIG_M5249)	+= timers.o intc.o
+obj-$(CONFIG_M527x)	+= pit.o intc-2.o
+obj-$(CONFIG_M5272)	+= timers.o
+obj-$(CONFIG_M528x)	+= pit.o intc-2.o
+obj-$(CONFIG_M5307)	+= timers.o intc.o
+obj-$(CONFIG_M532x)	+= timers.o intc-simr.o
+obj-$(CONFIG_M5407)	+= timers.o intc.o
+obj-$(CONFIG_M54xx)	+= sltimers.o intc-2.o
+
+obj-y			+= pinmux.o gpio.o
+extra-y := head.o
diff --git a/arch/m68k/platform/coldfire/cache.c b/arch/m68k/platform/coldfire/cache.c
new file mode 100644
index 00000000000..235d3c4f4f0
--- /dev/null
+++ b/arch/m68k/platform/coldfire/cache.c
@@ -0,0 +1,48 @@
+/***************************************************************************/
+
+/*
+ *	cache.c -- general ColdFire Cache maintainence code
+ *
+ *	Copyright (C) 2010, Greg Ungerer (gerg@snapgear.com)
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+
+/***************************************************************************/
+#ifdef CACHE_PUSH
+/***************************************************************************/
+
+/*
+ *	Use cpushl to push all dirty cache lines back to memory.
+ *	Older versions of GAS don't seem to know how to generate the
+ *	ColdFire cpushl instruction... Oh well, bit stuff it for now.
+ */
+
+void mcf_cache_push(void)
+{
+	__asm__ __volatile__ (
+		"clrl	%%d0\n\t"
+		"1:\n\t"
+		"movel	%%d0,%%a0\n\t"
+		"2:\n\t"
+		".word	0xf468\n\t"
+		"addl	%0,%%a0\n\t"
+		"cmpl	%1,%%a0\n\t"
+		"blt	2b\n\t"
+		"addql	#1,%%d0\n\t"
+		"cmpil	%2,%%d0\n\t"
+		"bne	1b\n\t"
+		: /* No output */
+		: "i" (CACHE_LINE_SIZE),
+		  "i" (DCACHE_SIZE / CACHE_WAYS),
+		  "i" (CACHE_WAYS)
+		: "d0", "a0" );
+}
+
+/***************************************************************************/
+#endif /* CACHE_PUSH */
+/***************************************************************************/
diff --git a/arch/m68k/platform/coldfire/clk.c b/arch/m68k/platform/coldfire/clk.c
new file mode 100644
index 00000000000..9f1260c5e2a
--- /dev/null
+++ b/arch/m68k/platform/coldfire/clk.c
@@ -0,0 +1,45 @@
+/***************************************************************************/
+
+/*
+ *	clk.c -- general ColdFire CPU kernel clk handling
+ *
+ *	Copyright (C) 2009, Greg Ungerer (gerg@snapgear.com)
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <asm/coldfire.h>
+
+/***************************************************************************/
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+	return NULL;
+}
+EXPORT_SYMBOL(clk_get);
+
+int clk_enable(struct clk *clk)
+{
+	return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_disable);
+
+void clk_put(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_put);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	return MCF_CLK;
+}
+EXPORT_SYMBOL(clk_get_rate);
+/***************************************************************************/
diff --git a/arch/m68k/platform/coldfire/dma.c b/arch/m68k/platform/coldfire/dma.c
new file mode 100644
index 00000000000..e88b95e2cc6
--- /dev/null
+++ b/arch/m68k/platform/coldfire/dma.c
@@ -0,0 +1,39 @@
+/***************************************************************************/
+
+/*
+ *	dma.c -- Freescale ColdFire DMA support
+ *
+ *	Copyright (C) 2007, Greg Ungerer (gerg@snapgear.com)
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <asm/dma.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfdma.h>
+
+/***************************************************************************/
+
+/*
+ *      DMA channel base address table.
+ */
+unsigned int dma_base_addr[MAX_M68K_DMA_CHANNELS] = {
+#ifdef MCFDMA_BASE0
+	MCFDMA_BASE0,
+#endif
+#ifdef MCFDMA_BASE1
+	MCFDMA_BASE1,
+#endif
+#ifdef MCFDMA_BASE2
+	MCFDMA_BASE2,
+#endif
+#ifdef MCFDMA_BASE3
+	MCFDMA_BASE3,
+#endif
+};
+
+unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS];
+
+/***************************************************************************/
diff --git a/arch/m68k/platform/coldfire/dma_timer.c b/arch/m68k/platform/coldfire/dma_timer.c
new file mode 100644
index 00000000000..a5f562823d7
--- /dev/null
+++ b/arch/m68k/platform/coldfire/dma_timer.c
@@ -0,0 +1,84 @@
+/*
+ * dma_timer.c -- Freescale ColdFire DMA Timer.
+ *
+ * Copyright (C) 2007, Benedikt Spranger <b.spranger@linutronix.de>
+ * Copyright (C) 2008. Sebastian Siewior, Linutronix
+ *
+ */
+
+#include <linux/clocksource.h>
+#include <linux/io.h>
+
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfpit.h>
+#include <asm/mcfsim.h>
+
+#define DMA_TIMER_0	(0x00)
+#define DMA_TIMER_1	(0x40)
+#define DMA_TIMER_2	(0x80)
+#define DMA_TIMER_3	(0xc0)
+
+#define DTMR0	(MCF_IPSBAR + DMA_TIMER_0 + 0x400)
+#define DTXMR0	(MCF_IPSBAR + DMA_TIMER_0 + 0x402)
+#define DTER0	(MCF_IPSBAR + DMA_TIMER_0 + 0x403)
+#define DTRR0	(MCF_IPSBAR + DMA_TIMER_0 + 0x404)
+#define DTCR0	(MCF_IPSBAR + DMA_TIMER_0 + 0x408)
+#define DTCN0	(MCF_IPSBAR + DMA_TIMER_0 + 0x40c)
+
+#define DMA_FREQ    ((MCF_CLK / 2) / 16)
+
+/* DTMR */
+#define DMA_DTMR_RESTART	(1 << 3)
+#define DMA_DTMR_CLK_DIV_1	(1 << 1)
+#define DMA_DTMR_CLK_DIV_16	(2 << 1)
+#define DMA_DTMR_ENABLE		(1 << 0)
+
+static cycle_t cf_dt_get_cycles(struct clocksource *cs)
+{
+	return __raw_readl(DTCN0);
+}
+
+static struct clocksource clocksource_cf_dt = {
+	.name		= "coldfire_dma_timer",
+	.rating		= 200,
+	.read		= cf_dt_get_cycles,
+	.mask		= CLOCKSOURCE_MASK(32),
+	.shift		= 20,
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int __init  init_cf_dt_clocksource(void)
+{
+	/*
+	 * We setup DMA timer 0 in free run mode. This incrementing counter is
+	 * used as a highly precious clock source. With MCF_CLOCK = 150 MHz we
+	 * get a ~213 ns resolution and the 32bit register will overflow almost
+	 * every 15 minutes.
+	 */
+	__raw_writeb(0x00, DTXMR0);
+	__raw_writeb(0x00, DTER0);
+	__raw_writel(0x00000000, DTRR0);
+	__raw_writew(DMA_DTMR_CLK_DIV_16 | DMA_DTMR_ENABLE, DTMR0);
+	clocksource_cf_dt.mult = clocksource_hz2mult(DMA_FREQ,
+						     clocksource_cf_dt.shift);
+	return clocksource_register(&clocksource_cf_dt);
+}
+
+arch_initcall(init_cf_dt_clocksource);
+
+#define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */
+#define CYC2NS_SCALE	((1000000 << CYC2NS_SCALE_FACTOR) / (DMA_FREQ / 1000))
+
+static unsigned long long cycles2ns(unsigned long cycl)
+{
+	return (unsigned long long) ((unsigned long long)cycl *
+			CYC2NS_SCALE) >> CYC2NS_SCALE_FACTOR;
+}
+
+unsigned long long sched_clock(void)
+{
+	unsigned long cycl = __raw_readl(DTCN0);
+
+	return cycles2ns(cycl);
+}
diff --git a/arch/m68k/platform/coldfire/entry.S b/arch/m68k/platform/coldfire/entry.S
new file mode 100644
index 00000000000..5837cf080b6
--- /dev/null
+++ b/arch/m68k/platform/coldfire/entry.S
@@ -0,0 +1,203 @@
+/*
+ *  linux/arch/m68knommu/platform/5307/entry.S
+ *
+ *  Copyright (C) 1999-2007, Greg Ungerer (gerg@snapgear.com)
+ *  Copyright (C) 1998  D. Jeff Dionne <jeff@lineo.ca>,
+ *                      Kenneth Albanowski <kjahds@kjahds.com>,
+ *  Copyright (C) 2000  Lineo Inc. (www.lineo.com)
+ *  Copyright (C) 2004-2006  Macq Electronique SA. (www.macqel.com)
+ *
+ * Based on:
+ *
+ *  linux/arch/m68k/kernel/entry.S
+ *
+ *  Copyright (C) 1991, 1992  Linus Torvalds
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file README.legal in the main directory of this archive
+ * for more details.
+ *
+ * Linux/m68k support by Hamish Macdonald
+ *
+ * 68060 fixes by Jesper Skov
+ * ColdFire support by Greg Ungerer (gerg@snapgear.com)
+ * 5307 fixes by David W. Miller
+ * linux 2.4 support David McCullough <davidm@snapgear.com>
+ * Bug, speed and maintainability fixes by Philippe De Muyter <phdm@macqel.be>
+ */
+
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/unistd.h>
+#include <asm/thread_info.h>
+#include <asm/errno.h>
+#include <asm/setup.h>
+#include <asm/segment.h>
+#include <asm/asm-offsets.h>
+#include <asm/entry.h>
+
+#ifdef CONFIG_COLDFIRE_SW_A7
+/*
+ *	Define software copies of the supervisor and user stack pointers.
+ */
+.bss
+sw_ksp:
+.long	0
+sw_usp:
+.long	0
+#endif /* CONFIG_COLDFIRE_SW_A7 */
+
+.text
+
+.globl system_call
+.globl resume
+.globl ret_from_exception
+.globl ret_from_signal
+.globl sys_call_table
+.globl inthandler
+.globl fasthandler
+
+enosys:
+	mov.l	#sys_ni_syscall,%d3
+	bra	1f
+
+ENTRY(system_call)
+	SAVE_ALL
+	move	#0x2000,%sr		/* enable intrs again */
+
+	cmpl	#NR_syscalls,%d0
+	jcc	enosys
+	lea	sys_call_table,%a0
+	lsll	#2,%d0			/* movel %a0@(%d0:l:4),%d3 */
+	movel	%a0@(%d0),%d3
+	jeq	enosys
+
+1:
+	movel	%sp,%d2			/* get thread_info pointer */
+	andl	#-THREAD_SIZE,%d2	/* at start of kernel stack */
+	movel	%d2,%a0
+	movel	%a0@,%a1		/* save top of frame */
+	movel	%sp,%a1@(TASK_THREAD+THREAD_ESP0)
+	btst	#(TIF_SYSCALL_TRACE%8),%a0@(TI_FLAGS+(31-TIF_SYSCALL_TRACE)/8)
+	bnes	1f
+
+	movel	%d3,%a0
+	jbsr	%a0@
+	movel	%d0,%sp@(PT_OFF_D0)	/* save the return value */
+	jra	ret_from_exception
+1:
+	movel	#-ENOSYS,%d2		/* strace needs -ENOSYS in PT_OFF_D0 */
+	movel	%d2,PT_OFF_D0(%sp)	/* on syscall entry */
+	subql	#4,%sp
+	SAVE_SWITCH_STACK
+	jbsr	syscall_trace_enter
+	RESTORE_SWITCH_STACK
+	addql	#4,%sp
+	movel	%d3,%a0
+	jbsr	%a0@
+	movel	%d0,%sp@(PT_OFF_D0)		/* save the return value */
+	subql	#4,%sp			/* dummy return address */
+	SAVE_SWITCH_STACK
+	jbsr	syscall_trace_leave
+
+ret_from_signal:
+	RESTORE_SWITCH_STACK
+	addql	#4,%sp
+
+ret_from_exception:
+	move	#0x2700,%sr		/* disable intrs */
+	btst	#5,%sp@(PT_OFF_SR)	/* check if returning to kernel */
+	jeq	Luser_return		/* if so, skip resched, signals */
+
+#ifdef CONFIG_PREEMPT
+	movel	%sp,%d1			/* get thread_info pointer */
+	andl	#-THREAD_SIZE,%d1	/* at base of kernel stack */
+	movel	%d1,%a0
+	movel	%a0@(TI_FLAGS),%d1	/* get thread_info->flags */
+	andl	#(1<<TIF_NEED_RESCHED),%d1
+	jeq	Lkernel_return
+
+	movel	%a0@(TI_PREEMPTCOUNT),%d1
+	cmpl	#0,%d1
+	jne	Lkernel_return
+
+	pea	Lkernel_return
+	jmp	preempt_schedule_irq	/* preempt the kernel */
+#endif
+
+Lkernel_return:
+	moveml	%sp@,%d1-%d5/%a0-%a2
+	lea	%sp@(32),%sp		/* space for 8 regs */
+	movel	%sp@+,%d0
+	addql	#4,%sp			/* orig d0 */
+	addl	%sp@+,%sp		/* stk adj */
+	rte
+
+Luser_return:
+	movel	%sp,%d1			/* get thread_info pointer */
+	andl	#-THREAD_SIZE,%d1	/* at base of kernel stack */
+	movel	%d1,%a0
+	movel	%a0@(TI_FLAGS),%d1	/* get thread_info->flags */
+	jne	Lwork_to_do		/* still work to do */
+
+Lreturn:
+	RESTORE_USER
+
+Lwork_to_do:
+	movel	%a0@(TI_FLAGS),%d1	/* get thread_info->flags */
+	move	#0x2000,%sr		/* enable intrs again */
+	btst	#TIF_NEED_RESCHED,%d1
+	jne	reschedule
+
+	/* GERG: do we need something here for TRACEing?? */
+
+Lsignal_return:
+	subql	#4,%sp			/* dummy return address */
+	SAVE_SWITCH_STACK
+	pea	%sp@(SWITCH_STACK_SIZE)
+	jsr	do_signal
+	addql	#4,%sp
+	RESTORE_SWITCH_STACK
+	addql	#4,%sp
+	jmp	Luser_return
+
+/*
+ * This is the generic interrupt handler (for all hardware interrupt
+ * sources). Calls upto high level code to do all the work.
+ */
+ENTRY(inthandler)
+	SAVE_ALL
+	moveq	#-1,%d0
+	movel	%d0,%sp@(PT_OFF_ORIG_D0)
+
+	movew	%sp@(PT_OFF_FORMATVEC),%d0 /* put exception # in d0 */
+	andl	#0x03fc,%d0		/* mask out vector only */
+
+	movel	%sp,%sp@-		/* push regs arg */
+	lsrl	#2,%d0			/* calculate real vector # */
+	movel	%d0,%sp@-		/* push vector number */
+	jbsr	do_IRQ			/* call high level irq handler */
+	lea	%sp@(8),%sp		/* pop args off stack */
+
+	bra	ret_from_exception
+
+/*
+ * Beware - when entering resume, prev (the current task) is
+ * in a0, next (the new task) is in a1,so don't change these
+ * registers until their contents are no longer needed.
+ * This is always called in supervisor mode, so don't bother to save
+ * and restore sr; user's process sr is actually in the stack.
+ */
+ENTRY(resume)
+	movel	%a0, %d1			/* get prev thread in d1 */
+	RDUSP
+	movel	%a2,%a0@(TASK_THREAD+THREAD_USP)
+
+	SAVE_SWITCH_STACK
+	movel	%sp,%a0@(TASK_THREAD+THREAD_KSP) /* save kernel stack pointer */
+	movel	%a1@(TASK_THREAD+THREAD_KSP),%sp /* restore new thread stack */
+	RESTORE_SWITCH_STACK
+
+	movel	%a1@(TASK_THREAD+THREAD_USP),%a0 /* restore thread user stack */
+	WRUSP
+	rts
diff --git a/arch/m68k/platform/coldfire/gpio.c b/arch/m68k/platform/coldfire/gpio.c
new file mode 100644
index 00000000000..ff004579345
--- /dev/null
+++ b/arch/m68k/platform/coldfire/gpio.c
@@ -0,0 +1,127 @@
+/*
+ * Coldfire generic GPIO support.
+ *
+ * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sysdev.h>
+
+#include <asm/gpio.h>
+#include <asm/pinmux.h>
+#include <asm/mcfgpio.h>
+
+#define MCF_CHIP(chip) container_of(chip, struct mcf_gpio_chip, gpio_chip)
+
+int mcf_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	unsigned long flags;
+	MCFGPIO_PORTTYPE dir;
+	struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip);
+
+	local_irq_save(flags);
+	dir = mcfgpio_read(mcf_chip->pddr);
+	dir &= ~mcfgpio_bit(chip->base + offset);
+	mcfgpio_write(dir, mcf_chip->pddr);
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+int mcf_gpio_get_value(struct gpio_chip *chip, unsigned offset)
+{
+	struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip);
+
+	return mcfgpio_read(mcf_chip->ppdr) & mcfgpio_bit(chip->base + offset);
+}
+
+int mcf_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
+		int value)
+{
+	unsigned long flags;
+	MCFGPIO_PORTTYPE data;
+	struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip);
+
+	local_irq_save(flags);
+	/* write the value to the output latch */
+	data = mcfgpio_read(mcf_chip->podr);
+	if (value)
+		data |= mcfgpio_bit(chip->base + offset);
+	else
+		data &= ~mcfgpio_bit(chip->base + offset);
+	mcfgpio_write(data, mcf_chip->podr);
+
+	/* now set the direction to output */
+	data = mcfgpio_read(mcf_chip->pddr);
+	data |= mcfgpio_bit(chip->base + offset);
+	mcfgpio_write(data, mcf_chip->pddr);
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+void mcf_gpio_set_value(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip);
+
+	unsigned long flags;
+	MCFGPIO_PORTTYPE data;
+
+	local_irq_save(flags);
+	data = mcfgpio_read(mcf_chip->podr);
+	if (value)
+		data |= mcfgpio_bit(chip->base + offset);
+	else
+		data &= ~mcfgpio_bit(chip->base + offset);
+	mcfgpio_write(data, mcf_chip->podr);
+	local_irq_restore(flags);
+}
+
+void mcf_gpio_set_value_fast(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip);
+
+	if (value)
+		mcfgpio_write(mcfgpio_bit(chip->base + offset), mcf_chip->setr);
+	else
+		mcfgpio_write(~mcfgpio_bit(chip->base + offset), mcf_chip->clrr);
+}
+
+int mcf_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+	struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip);
+
+	return mcf_chip->gpio_to_pinmux ?
+		mcf_pinmux_request(mcf_chip->gpio_to_pinmux[offset], 0) : 0;
+}
+
+void mcf_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+	struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip);
+
+	mcf_gpio_direction_input(chip, offset);
+
+	if (mcf_chip->gpio_to_pinmux)
+		mcf_pinmux_release(mcf_chip->gpio_to_pinmux[offset], 0);
+}
+
+struct sysdev_class mcf_gpio_sysclass = {
+	.name	= "gpio",
+};
+
+static int __init mcf_gpio_sysinit(void)
+{
+	return sysdev_class_register(&mcf_gpio_sysclass);
+}
+
+core_initcall(mcf_gpio_sysinit);
diff --git a/arch/m68k/platform/coldfire/head.S b/arch/m68k/platform/coldfire/head.S
new file mode 100644
index 00000000000..129bff4956b
--- /dev/null
+++ b/arch/m68k/platform/coldfire/head.S
@@ -0,0 +1,250 @@
+/*****************************************************************************/
+
+/*
+ *	head.S -- common startup code for ColdFire CPUs.
+ *
+ *	(C) Copyright 1999-2010, Greg Ungerer <gerg@snapgear.com>.
+ */
+
+/*****************************************************************************/
+
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/asm-offsets.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/thread_info.h>
+
+/*****************************************************************************/
+
+/*
+ *	If we don't have a fixed memory size, then lets build in code
+ *	to auto detect the DRAM size. Obviously this is the prefered
+ *	method, and should work for most boards. It won't work for those
+ *	that do not have their RAM starting at address 0, and it only
+ *	works on SDRAM (not boards fitted with SRAM).
+ */
+#if CONFIG_RAMSIZE != 0
+.macro GET_MEM_SIZE
+	movel	#CONFIG_RAMSIZE,%d0	/* hard coded memory size */
+.endm
+
+#elif defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
+      defined(CONFIG_M5249) || defined(CONFIG_M527x) || \
+      defined(CONFIG_M528x) || defined(CONFIG_M5307) || \
+      defined(CONFIG_M5407)
+/*
+ *	Not all these devices have exactly the same DRAM controller,
+ *	but the DCMR register is virtually identical - give or take
+ *	a couple of bits. The only exception is the 5272 devices, their
+ *	DRAM controller is quite different.
+ */
+.macro GET_MEM_SIZE
+	movel	MCFSIM_DMR0,%d0		/* get mask for 1st bank */
+	btst	#0,%d0			/* check if region enabled */
+	beq	1f
+	andl	#0xfffc0000,%d0
+	beq	1f
+	addl	#0x00040000,%d0		/* convert mask to size */
+1:
+	movel	MCFSIM_DMR1,%d1		/* get mask for 2nd bank */
+	btst	#0,%d1			/* check if region enabled */
+	beq	2f
+	andl	#0xfffc0000,%d1
+	beq	2f
+	addl	#0x00040000,%d1
+	addl	%d1,%d0			/* total mem size in d0 */
+2:
+.endm
+
+#elif defined(CONFIG_M5272)
+.macro GET_MEM_SIZE
+	movel	MCF_MBAR+MCFSIM_CSOR7,%d0 /* get SDRAM address mask */
+	andil	#0xfffff000,%d0		/* mask out chip select options */
+	negl	%d0			/* negate bits */
+.endm
+
+#elif defined(CONFIG_M520x)
+.macro GET_MEM_SIZE
+	clrl	%d0
+	movel	MCFSIM_SDCS0, %d2	/* Get SDRAM chip select 0 config */
+	andl	#0x1f, %d2		/* Get only the chip select size */
+	beq	3f			/* Check if it is enabled */
+	addql	#1, %d2			/* Form exponent */
+	moveql	#1, %d0
+	lsll	%d2, %d0		/* 2 ^ exponent */
+3:
+	movel	MCFSIM_SDCS1, %d2	/* Get SDRAM chip select 1 config */
+	andl	#0x1f, %d2		/* Get only the chip select size */
+	beq	4f			/* Check if it is enabled */
+	addql	#1, %d2			/* Form exponent */
+	moveql	#1, %d1
+	lsll	%d2, %d1		/* 2 ^ exponent */
+	addl	%d1, %d0		/* Total size of SDRAM in d0 */
+4:
+.endm
+
+#else
+#error "ERROR: I don't know how to probe your boards memory size?"
+#endif
+
+/*****************************************************************************/
+
+/*
+ *	Boards and platforms can do specific early hardware setup if
+ *	they need to. Most don't need this, define away if not required.
+ */
+#ifndef PLATFORM_SETUP
+#define	PLATFORM_SETUP
+#endif
+
+/*****************************************************************************/
+
+.global	_start
+.global _rambase
+.global _ramvec
+.global	_ramstart
+.global	_ramend
+#if defined(CONFIG_UBOOT)
+.global	_init_sp
+#endif
+
+/*****************************************************************************/
+
+.data
+
+/*
+ *	During startup we store away the RAM setup. These are not in the
+ *	bss, since their values are determined and written before the bss
+ *	has been cleared.
+ */
+_rambase:
+.long	0
+_ramvec:
+.long	0
+_ramstart:
+.long	0
+_ramend:
+.long	0
+#if defined(CONFIG_UBOOT)
+_init_sp:
+.long	0
+#endif
+
+/*****************************************************************************/
+
+__HEAD
+
+/*
+ *	This is the codes first entry point. This is where it all
+ *	begins...
+ */
+
+_start:
+	nop					/* filler */
+	movew	#0x2700, %sr			/* no interrupts */
+#if defined(CONFIG_UBOOT)
+	movel	%sp,_init_sp			/* save initial stack pointer */
+#endif
+
+	/*
+	 *	Do any platform or board specific setup now. Most boards
+	 *	don't need anything. Those exceptions are define this in
+	 *	their board specific includes.
+	 */
+	PLATFORM_SETUP
+
+	/*
+	 *	Create basic memory configuration. Set VBR accordingly,
+	 *	and size memory.
+	 */
+	movel	#CONFIG_VECTORBASE,%a7
+	movec   %a7,%VBR			/* set vectors addr */
+	movel	%a7,_ramvec
+
+	movel	#CONFIG_RAMBASE,%a7		/* mark the base of RAM */
+	movel	%a7,_rambase
+
+	GET_MEM_SIZE				/* macro code determines size */
+	addl	%a7,%d0
+	movel	%d0,_ramend			/* set end ram addr */
+
+	/*
+	 *	Now that we know what the memory is, lets enable cache
+	 *	and get things moving. This is Coldfire CPU specific. Not
+	 *	all version cores have identical cache register setup. But
+	 *	it is very similar. Define the exact settings in the headers
+	 *	then the code here is the same for all.
+	 */
+	movel	#CACHE_INIT,%d0			/* invalidate whole cache */
+	movec	%d0,%CACR
+	nop
+	movel	#ACR0_MODE,%d0			/* set RAM region for caching */
+	movec	%d0,%ACR0
+	movel	#ACR1_MODE,%d0			/* anything else to cache? */
+	movec	%d0,%ACR1
+#ifdef ACR2_MODE
+	movel	#ACR2_MODE,%d0
+	movec	%d0,%ACR2
+	movel	#ACR3_MODE,%d0
+	movec	%d0,%ACR3
+#endif
+	movel	#CACHE_MODE,%d0			/* enable cache */
+	movec	%d0,%CACR
+	nop
+
+#ifdef CONFIG_ROMFS_FS
+	/*
+	 *	Move ROM filesystem above bss :-)
+	 */
+	lea	_sbss,%a0			/* get start of bss */
+	lea	_ebss,%a1			/* set up destination  */
+	movel	%a0,%a2				/* copy of bss start */
+
+	movel	8(%a0),%d0			/* get size of ROMFS */
+	addql	#8,%d0				/* allow for rounding */
+	andl	#0xfffffffc, %d0		/* whole words */
+
+	addl	%d0,%a0				/* copy from end */
+	addl	%d0,%a1				/* copy from end */
+	movel	%a1,_ramstart			/* set start of ram */
+
+_copy_romfs:
+	movel	-(%a0),%d0			/* copy dword */
+	movel	%d0,-(%a1)
+	cmpl	%a0,%a2				/* check if at end */
+	bne	_copy_romfs
+
+#else /* CONFIG_ROMFS_FS */
+	lea	_ebss,%a1
+	movel	%a1,_ramstart
+#endif /* CONFIG_ROMFS_FS */
+
+
+	/*
+	 *	Zero out the bss region.
+	 */
+	lea	_sbss,%a0			/* get start of bss */
+	lea	_ebss,%a1			/* get end of bss */
+	clrl	%d0				/* set value */
+_clear_bss:
+	movel	%d0,(%a0)+			/* clear each word */
+	cmpl	%a0,%a1				/* check if at end */
+	bne	_clear_bss
+
+	/*
+	 *	Load the current task pointer and stack.
+	 */
+	lea	init_thread_union,%a0
+	lea	THREAD_SIZE(%a0),%sp
+
+	/*
+	 *	Assember start up done, start code proper.
+	 */
+	jsr	start_kernel			/* start Linux kernel */
+
+_exit:
+	jmp	_exit				/* should never get here */
+
+/*****************************************************************************/
diff --git a/arch/m68k/platform/coldfire/intc-2.c b/arch/m68k/platform/coldfire/intc-2.c
new file mode 100644
index 00000000000..2cbfbf035db
--- /dev/null
+++ b/arch/m68k/platform/coldfire/intc-2.c
@@ -0,0 +1,214 @@
+/*
+ * intc-2.c
+ *
+ * General interrupt controller code for the many ColdFire cores that use
+ * interrupt controllers with 63 interrupt sources, organized as 56 fully-
+ * programmable + 7 fixed-level interrupt sources. This includes the 523x
+ * family, the 5270, 5271, 5274, 5275, and the 528x family which have two such
+ * controllers, and the 547x and 548x families which have only one of them.
+ *
+ * The external 7 fixed interrupts are part the the Edge Port unit of these
+ * ColdFire parts. They can be configured as level or edge triggered.
+ *
+ * (C) Copyright 2009-2011, Greg Ungerer <gerg@snapgear.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/traps.h>
+
+/*
+ * Bit definitions for the ICR family of registers.
+ */
+#define MCFSIM_ICR_LEVEL(l)	((l)<<3)	/* Level l intr */
+#define MCFSIM_ICR_PRI(p)	(p)		/* Priority p intr */
+
+/*
+ *	The EDGE Port interrupts are the fixed 7 external interrupts.
+ *	They need some special treatment, for example they need to be acked.
+ */
+#define	EINT0	64	/* Is not actually used, but spot reserved for it */
+#define	EINT1	65	/* EDGE Port interrupt 1 */
+#define	EINT7	71	/* EDGE Port interrupt 7 */
+
+#ifdef MCFICM_INTC1
+#define NR_VECS	128
+#else
+#define NR_VECS	64
+#endif
+
+static void intc_irq_mask(struct irq_data *d)
+{
+	unsigned int irq = d->irq - MCFINT_VECBASE;
+	unsigned long imraddr;
+	u32 val, imrbit;
+
+#ifdef MCFICM_INTC1
+	imraddr = (irq & 0x40) ? MCFICM_INTC1 : MCFICM_INTC0;
+#else
+	imraddr = MCFICM_INTC0;
+#endif
+	imraddr += (irq & 0x20) ? MCFINTC_IMRH : MCFINTC_IMRL;
+	imrbit = 0x1 << (irq & 0x1f);
+
+	val = __raw_readl(imraddr);
+	__raw_writel(val | imrbit, imraddr);
+}
+
+static void intc_irq_unmask(struct irq_data *d)
+{
+	unsigned int irq = d->irq - MCFINT_VECBASE;
+	unsigned long imraddr;
+	u32 val, imrbit;
+
+#ifdef MCFICM_INTC1
+	imraddr = (irq & 0x40) ? MCFICM_INTC1 : MCFICM_INTC0;
+#else
+	imraddr = MCFICM_INTC0;
+#endif
+	imraddr += ((irq & 0x20) ? MCFINTC_IMRH : MCFINTC_IMRL);
+	imrbit = 0x1 << (irq & 0x1f);
+
+	/* Don't set the "maskall" bit! */
+	if ((irq & 0x20) == 0)
+		imrbit |= 0x1;
+
+	val = __raw_readl(imraddr);
+	__raw_writel(val & ~imrbit, imraddr);
+}
+
+/*
+ *	Only the external (or EDGE Port) interrupts need to be acknowledged
+ *	here, as part of the IRQ handler. They only really need to be ack'ed
+ *	if they are in edge triggered mode, but there is no harm in doing it
+ *	for all types.
+ */
+static void intc_irq_ack(struct irq_data *d)
+{
+	unsigned int irq = d->irq;
+
+	__raw_writeb(0x1 << (irq - EINT0), MCFEPORT_EPFR);
+}
+
+/*
+ *	Each vector needs a unique priority and level associated with it.
+ *	We don't really care so much what they are, we don't rely on the
+ *	traditional priority interrupt scheme of the m68k/ColdFire. This
+ *	only needs to be set once for an interrupt, and we will never change
+ *	these values once we have set them.
+ */
+static u8 intc_intpri = MCFSIM_ICR_LEVEL(6) | MCFSIM_ICR_PRI(6);
+
+static unsigned int intc_irq_startup(struct irq_data *d)
+{
+	unsigned int irq = d->irq - MCFINT_VECBASE;
+	unsigned long icraddr;
+
+#ifdef MCFICM_INTC1
+	icraddr = (irq & 0x40) ? MCFICM_INTC1 : MCFICM_INTC0;
+#else
+	icraddr = MCFICM_INTC0;
+#endif
+	icraddr += MCFINTC_ICR0 + (irq & 0x3f);
+	if (__raw_readb(icraddr) == 0)
+		__raw_writeb(intc_intpri--, icraddr);
+
+	irq = d->irq;
+	if ((irq >= EINT1) && (irq <= EINT7)) {
+		u8 v;
+
+		irq -= EINT0;
+
+		/* Set EPORT line as input */
+		v = __raw_readb(MCFEPORT_EPDDR);
+		__raw_writeb(v & ~(0x1 << irq), MCFEPORT_EPDDR);
+
+		/* Set EPORT line as interrupt source */
+		v = __raw_readb(MCFEPORT_EPIER);
+		__raw_writeb(v | (0x1 << irq), MCFEPORT_EPIER);
+	}
+
+	intc_irq_unmask(d);
+	return 0;
+}
+
+static int intc_irq_set_type(struct irq_data *d, unsigned int type)
+{
+	unsigned int irq = d->irq;
+	u16 pa, tb;
+
+	switch (type) {
+	case IRQ_TYPE_EDGE_RISING:
+		tb = 0x1;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		tb = 0x2;
+		break;
+	case IRQ_TYPE_EDGE_BOTH:
+		tb = 0x3;
+		break;
+	default:
+		/* Level triggered */
+		tb = 0;
+		break;
+	}
+
+	if (tb)
+		set_irq_handler(irq, handle_edge_irq);
+
+	irq -= EINT0;
+	pa = __raw_readw(MCFEPORT_EPPAR);
+	pa = (pa & ~(0x3 << (irq * 2))) | (tb << (irq * 2));
+	__raw_writew(pa, MCFEPORT_EPPAR);
+	
+	return 0;
+}
+
+static struct irq_chip intc_irq_chip = {
+	.name		= "CF-INTC",
+	.irq_startup	= intc_irq_startup,
+	.irq_mask	= intc_irq_mask,
+	.irq_unmask	= intc_irq_unmask,
+};
+
+static struct irq_chip intc_irq_chip_edge_port = {
+	.name		= "CF-INTC-EP",
+	.irq_startup	= intc_irq_startup,
+	.irq_mask	= intc_irq_mask,
+	.irq_unmask	= intc_irq_unmask,
+	.irq_ack	= intc_irq_ack,
+	.irq_set_type	= intc_irq_set_type,
+};
+
+void __init init_IRQ(void)
+{
+	int irq;
+
+	init_vectors();
+
+	/* Mask all interrupt sources */
+	__raw_writel(0x1, MCFICM_INTC0 + MCFINTC_IMRL);
+#ifdef MCFICM_INTC1
+	__raw_writel(0x1, MCFICM_INTC1 + MCFINTC_IMRL);
+#endif
+
+	for (irq = MCFINT_VECBASE; (irq < MCFINT_VECBASE + NR_VECS); irq++) {
+		if ((irq >= EINT1) && (irq <=EINT7))
+			set_irq_chip(irq, &intc_irq_chip_edge_port);
+		else
+			set_irq_chip(irq, &intc_irq_chip);
+		set_irq_type(irq, IRQ_TYPE_LEVEL_HIGH);
+		set_irq_handler(irq, handle_level_irq);
+	}
+}
+
diff --git a/arch/m68k/platform/coldfire/intc-simr.c b/arch/m68k/platform/coldfire/intc-simr.c
new file mode 100644
index 00000000000..e642b24ab72
--- /dev/null
+++ b/arch/m68k/platform/coldfire/intc-simr.c
@@ -0,0 +1,191 @@
+/*
+ * intc-simr.c
+ *
+ * Interrupt controller code for the ColdFire 5208, 5207 & 532x parts.
+ *
+ * (C) Copyright 2009-2011, Greg Ungerer <gerg@snapgear.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/traps.h>
+
+/*
+ *	The EDGE Port interrupts are the fixed 7 external interrupts.
+ *	They need some special treatment, for example they need to be acked.
+ */
+#ifdef CONFIG_M520x
+/*
+ *	The 520x parts only support a limited range of these external
+ *	interrupts, only 1, 4 and 7 (as interrupts 65, 66 and 67).
+ */
+#define	EINT0	64	/* Is not actually used, but spot reserved for it */
+#define	EINT1	65	/* EDGE Port interrupt 1 */
+#define	EINT4	66	/* EDGE Port interrupt 4 */
+#define	EINT7	67	/* EDGE Port interrupt 7 */
+
+static unsigned int irqebitmap[] = { 0, 1, 4, 7 };
+static unsigned int inline irq2ebit(unsigned int irq)
+{
+	return irqebitmap[irq - EINT0];
+}
+
+#else
+
+/*
+ *	Most of the ColdFire parts with the EDGE Port module just have
+ *	a strait direct mapping of the 7 external interrupts. Although
+ *	there is a bit reserved for 0, it is not used.
+ */
+#define	EINT0	64	/* Is not actually used, but spot reserved for it */
+#define	EINT1	65	/* EDGE Port interrupt 1 */
+#define	EINT7	71	/* EDGE Port interrupt 7 */
+
+static unsigned int inline irq2ebit(unsigned int irq)
+{
+	return irq - EINT0;
+}
+
+#endif
+
+/*
+ *	There maybe one or two interrupt control units, each has 64
+ *	interrupts. If there is no second unit then MCFINTC1_* defines
+ *	will be 0 (and code for them optimized away).
+ */
+
+static void intc_irq_mask(struct irq_data *d)
+{
+	unsigned int irq = d->irq - MCFINT_VECBASE;
+
+	if (MCFINTC1_SIMR && (irq > 64))
+		__raw_writeb(irq - 64, MCFINTC1_SIMR);
+	else
+		__raw_writeb(irq, MCFINTC0_SIMR);
+}
+
+static void intc_irq_unmask(struct irq_data *d)
+{
+	unsigned int irq = d->irq - MCFINT_VECBASE;
+
+	if (MCFINTC1_CIMR && (irq > 64))
+		__raw_writeb(irq - 64, MCFINTC1_CIMR);
+	else
+		__raw_writeb(irq, MCFINTC0_CIMR);
+}
+
+static void intc_irq_ack(struct irq_data *d)
+{
+	unsigned int ebit = irq2ebit(d->irq);
+
+	__raw_writeb(0x1 << ebit, MCFEPORT_EPFR);
+}
+
+static unsigned int intc_irq_startup(struct irq_data *d)
+{
+	unsigned int irq = d->irq;
+
+	if ((irq >= EINT1) && (irq <= EINT7)) {
+		unsigned int ebit = irq2ebit(irq);
+		u8 v;
+
+		/* Set EPORT line as input */
+		v = __raw_readb(MCFEPORT_EPDDR);
+		__raw_writeb(v & ~(0x1 << ebit), MCFEPORT_EPDDR);
+
+		/* Set EPORT line as interrupt source */
+		v = __raw_readb(MCFEPORT_EPIER);
+		__raw_writeb(v | (0x1 << ebit), MCFEPORT_EPIER);
+	}
+
+	irq -= MCFINT_VECBASE;
+	if (MCFINTC1_ICR0 && (irq > 64))
+		__raw_writeb(5, MCFINTC1_ICR0 + irq - 64);
+	else
+		__raw_writeb(5, MCFINTC0_ICR0 + irq);
+
+
+	intc_irq_unmask(d);
+	return 0;
+}
+
+static int intc_irq_set_type(struct irq_data *d, unsigned int type)
+{
+	unsigned int ebit, irq = d->irq;
+	u16 pa, tb;
+
+	switch (type) {
+	case IRQ_TYPE_EDGE_RISING:
+		tb = 0x1;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		tb = 0x2;
+		break;
+	case IRQ_TYPE_EDGE_BOTH:
+		tb = 0x3;
+		break;
+	default:
+		/* Level triggered */
+		tb = 0;
+		break;
+	}
+
+	if (tb)
+		set_irq_handler(irq, handle_edge_irq);
+
+	ebit = irq2ebit(irq) * 2;
+	pa = __raw_readw(MCFEPORT_EPPAR);
+	pa = (pa & ~(0x3 << ebit)) | (tb << ebit);
+	__raw_writew(pa, MCFEPORT_EPPAR);
+	
+	return 0;
+}
+
+static struct irq_chip intc_irq_chip = {
+	.name		= "CF-INTC",
+	.irq_startup	= intc_irq_startup,
+	.irq_mask	= intc_irq_mask,
+	.irq_unmask	= intc_irq_unmask,
+};
+
+static struct irq_chip intc_irq_chip_edge_port = {
+	.name		= "CF-INTC-EP",
+	.irq_startup	= intc_irq_startup,
+	.irq_mask	= intc_irq_mask,
+	.irq_unmask	= intc_irq_unmask,
+	.irq_ack	= intc_irq_ack,
+	.irq_set_type	= intc_irq_set_type,
+};
+
+void __init init_IRQ(void)
+{
+	int irq, eirq;
+
+	init_vectors();
+
+	/* Mask all interrupt sources */
+	__raw_writeb(0xff, MCFINTC0_SIMR);
+	if (MCFINTC1_SIMR)
+		__raw_writeb(0xff, MCFINTC1_SIMR);
+
+	eirq = MCFINT_VECBASE + 64 + (MCFINTC1_ICR0 ? 64 : 0);
+	for (irq = MCFINT_VECBASE; (irq < eirq); irq++) {
+		if ((irq >= EINT1) && (irq <= EINT7))
+			set_irq_chip(irq, &intc_irq_chip_edge_port);
+		else
+			set_irq_chip(irq, &intc_irq_chip);
+		set_irq_type(irq, IRQ_TYPE_LEVEL_HIGH);
+		set_irq_handler(irq, handle_level_irq);
+	}
+}
+
diff --git a/arch/m68k/platform/coldfire/intc.c b/arch/m68k/platform/coldfire/intc.c
new file mode 100644
index 00000000000..d648081a63f
--- /dev/null
+++ b/arch/m68k/platform/coldfire/intc.c
@@ -0,0 +1,151 @@
+/*
+ * intc.c  -- support for the old ColdFire interrupt controller
+ *
+ * (C) Copyright 2009, Greg Ungerer <gerg@snapgear.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <asm/traps.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+
+/*
+ * The mapping of irq number to a mask register bit is not one-to-one.
+ * The irq numbers are either based on "level" of interrupt or fixed
+ * for an autovector-able interrupt. So we keep a local data structure
+ * that maps from irq to mask register. Not all interrupts will have
+ * an IMR bit.
+ */
+unsigned char mcf_irq2imr[NR_IRQS];
+
+/*
+ * Define the miniumun and maximum external interrupt numbers.
+ * This is also used as the "level" interrupt numbers.
+ */
+#define	EIRQ1	25
+#define	EIRQ7	31
+
+/*
+ * In the early version 2 core ColdFire parts the IMR register was 16 bits
+ * in size. Version 3 (and later version 2) core parts have a 32 bit
+ * sized IMR register. Provide some size independant methods to access the
+ * IMR register.
+ */
+#ifdef MCFSIM_IMR_IS_16BITS
+
+void mcf_setimr(int index)
+{
+	u16 imr;
+	imr = __raw_readw(MCF_MBAR + MCFSIM_IMR);
+	__raw_writew(imr | (0x1 << index), MCF_MBAR + MCFSIM_IMR);
+}
+
+void mcf_clrimr(int index)
+{
+	u16 imr;
+	imr = __raw_readw(MCF_MBAR + MCFSIM_IMR);
+	__raw_writew(imr & ~(0x1 << index), MCF_MBAR + MCFSIM_IMR);
+}
+
+void mcf_maskimr(unsigned int mask)
+{
+	u16 imr;
+	imr = __raw_readw(MCF_MBAR + MCFSIM_IMR);
+	imr |= mask;
+	__raw_writew(imr, MCF_MBAR + MCFSIM_IMR);
+}
+
+#else
+
+void mcf_setimr(int index)
+{
+	u32 imr;
+	imr = __raw_readl(MCF_MBAR + MCFSIM_IMR);
+	__raw_writel(imr | (0x1 << index), MCF_MBAR + MCFSIM_IMR);
+}
+
+void mcf_clrimr(int index)
+{
+	u32 imr;
+	imr = __raw_readl(MCF_MBAR + MCFSIM_IMR);
+	__raw_writel(imr & ~(0x1 << index), MCF_MBAR + MCFSIM_IMR);
+}
+
+void mcf_maskimr(unsigned int mask)
+{
+	u32 imr;
+	imr = __raw_readl(MCF_MBAR + MCFSIM_IMR);
+	imr |= mask;
+	__raw_writel(imr, MCF_MBAR + MCFSIM_IMR);
+}
+
+#endif
+
+/*
+ * Interrupts can be "vectored" on the ColdFire cores that support this old
+ * interrupt controller. That is, the device raising the interrupt can also
+ * supply the vector number to interrupt through. The AVR register of the
+ * interrupt controller enables or disables this for each external interrupt,
+ * so provide generic support for this. Setting this up is out-of-band for
+ * the interrupt system API's, and needs to be done by the driver that
+ * supports this device. Very few devices actually use this.
+ */
+void mcf_autovector(int irq)
+{
+#ifdef MCFSIM_AVR
+	if ((irq >= EIRQ1) && (irq <= EIRQ7)) {
+		u8 avec;
+		avec = __raw_readb(MCF_MBAR + MCFSIM_AVR);
+		avec |= (0x1 << (irq - EIRQ1 + 1));
+		__raw_writeb(avec, MCF_MBAR + MCFSIM_AVR);
+	}
+#endif
+}
+
+static void intc_irq_mask(struct irq_data *d)
+{
+	if (mcf_irq2imr[d->irq])
+		mcf_setimr(mcf_irq2imr[d->irq]);
+}
+
+static void intc_irq_unmask(struct irq_data *d)
+{
+	if (mcf_irq2imr[d->irq])
+		mcf_clrimr(mcf_irq2imr[d->irq]);
+}
+
+static int intc_irq_set_type(struct irq_data *d, unsigned int type)
+{
+	return 0;
+}
+
+static struct irq_chip intc_irq_chip = {
+	.name		= "CF-INTC",
+	.irq_mask	= intc_irq_mask,
+	.irq_unmask	= intc_irq_unmask,
+	.irq_set_type	= intc_irq_set_type,
+};
+
+void __init init_IRQ(void)
+{
+	int irq;
+
+	init_vectors();
+	mcf_maskimr(0xffffffff);
+
+	for (irq = 0; (irq < NR_IRQS); irq++) {
+		set_irq_chip(irq, &intc_irq_chip);
+		set_irq_type(irq, IRQ_TYPE_LEVEL_HIGH);
+		set_irq_handler(irq, handle_level_irq);
+	}
+}
+
diff --git a/arch/m68k/platform/coldfire/pinmux.c b/arch/m68k/platform/coldfire/pinmux.c
new file mode 100644
index 00000000000..8c62b825939
--- /dev/null
+++ b/arch/m68k/platform/coldfire/pinmux.c
@@ -0,0 +1,28 @@
+/*
+ * Coldfire generic GPIO pinmux support.
+ *
+ * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; version 2 of the License.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+
+#include <asm/pinmux.h>
+
+int mcf_pinmux_request(unsigned pinmux, unsigned func)
+{
+	return 0;
+}
+
+void mcf_pinmux_release(unsigned pinmux, unsigned func)
+{
+}
diff --git a/arch/m68k/platform/coldfire/pit.c b/arch/m68k/platform/coldfire/pit.c
new file mode 100644
index 00000000000..c2b980926be
--- /dev/null
+++ b/arch/m68k/platform/coldfire/pit.c
@@ -0,0 +1,169 @@
+/***************************************************************************/
+
+/*
+ *	pit.c -- Freescale ColdFire PIT timer. Currently this type of
+ *	         hardware timer only exists in the Freescale ColdFire
+ *		 5270/5271, 5282 and 5208 CPUs. No doubt newer ColdFire
+ *		 family members will probably use it too.
+ *
+ *	Copyright (C) 1999-2008, Greg Ungerer (gerg@snapgear.com)
+ *	Copyright (C) 2001-2004, SnapGear Inc. (www.snapgear.com)
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/clockchips.h>
+#include <asm/machdep.h>
+#include <asm/io.h>
+#include <asm/coldfire.h>
+#include <asm/mcfpit.h>
+#include <asm/mcfsim.h>
+
+/***************************************************************************/
+
+/*
+ *	By default use timer1 as the system clock timer.
+ */
+#define	FREQ	((MCF_CLK / 2) / 64)
+#define	TA(a)	(MCFPIT_BASE1 + (a))
+#define PIT_CYCLES_PER_JIFFY (FREQ / HZ)
+
+static u32 pit_cnt;
+
+/*
+ * Initialize the PIT timer.
+ *
+ * This is also called after resume to bring the PIT into operation again.
+ */
+
+static void init_cf_pit_timer(enum clock_event_mode mode,
+                             struct clock_event_device *evt)
+{
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+
+		__raw_writew(MCFPIT_PCSR_DISABLE, TA(MCFPIT_PCSR));
+		__raw_writew(PIT_CYCLES_PER_JIFFY, TA(MCFPIT_PMR));
+		__raw_writew(MCFPIT_PCSR_EN | MCFPIT_PCSR_PIE | \
+				MCFPIT_PCSR_OVW | MCFPIT_PCSR_RLD | \
+				MCFPIT_PCSR_CLK64, TA(MCFPIT_PCSR));
+		break;
+
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	case CLOCK_EVT_MODE_UNUSED:
+
+		__raw_writew(MCFPIT_PCSR_DISABLE, TA(MCFPIT_PCSR));
+		break;
+
+	case CLOCK_EVT_MODE_ONESHOT:
+
+		__raw_writew(MCFPIT_PCSR_DISABLE, TA(MCFPIT_PCSR));
+		__raw_writew(MCFPIT_PCSR_EN | MCFPIT_PCSR_PIE | \
+				MCFPIT_PCSR_OVW | MCFPIT_PCSR_CLK64, \
+				TA(MCFPIT_PCSR));
+		break;
+
+	case CLOCK_EVT_MODE_RESUME:
+		/* Nothing to do here */
+		break;
+	}
+}
+
+/*
+ * Program the next event in oneshot mode
+ *
+ * Delta is given in PIT ticks
+ */
+static int cf_pit_next_event(unsigned long delta,
+		struct clock_event_device *evt)
+{
+	__raw_writew(delta, TA(MCFPIT_PMR));
+	return 0;
+}
+
+struct clock_event_device cf_pit_clockevent = {
+	.name		= "pit",
+	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.set_mode	= init_cf_pit_timer,
+	.set_next_event	= cf_pit_next_event,
+	.shift		= 32,
+	.irq		= MCFINT_VECBASE + MCFINT_PIT1,
+};
+
+
+
+/***************************************************************************/
+
+static irqreturn_t pit_tick(int irq, void *dummy)
+{
+	struct clock_event_device *evt = &cf_pit_clockevent;
+	u16 pcsr;
+
+	/* Reset the ColdFire timer */
+	pcsr = __raw_readw(TA(MCFPIT_PCSR));
+	__raw_writew(pcsr | MCFPIT_PCSR_PIF, TA(MCFPIT_PCSR));
+
+	pit_cnt += PIT_CYCLES_PER_JIFFY;
+	evt->event_handler(evt);
+	return IRQ_HANDLED;
+}
+
+/***************************************************************************/
+
+static struct irqaction pit_irq = {
+	.name	 = "timer",
+	.flags	 = IRQF_DISABLED | IRQF_TIMER,
+	.handler = pit_tick,
+};
+
+/***************************************************************************/
+
+static cycle_t pit_read_clk(struct clocksource *cs)
+{
+	unsigned long flags;
+	u32 cycles;
+	u16 pcntr;
+
+	local_irq_save(flags);
+	pcntr = __raw_readw(TA(MCFPIT_PCNTR));
+	cycles = pit_cnt;
+	local_irq_restore(flags);
+
+	return cycles + PIT_CYCLES_PER_JIFFY - pcntr;
+}
+
+/***************************************************************************/
+
+static struct clocksource pit_clk = {
+	.name	= "pit",
+	.rating	= 100,
+	.read	= pit_read_clk,
+	.shift	= 20,
+	.mask	= CLOCKSOURCE_MASK(32),
+};
+
+/***************************************************************************/
+
+void hw_timer_init(void)
+{
+	cf_pit_clockevent.cpumask = cpumask_of(smp_processor_id());
+	cf_pit_clockevent.mult = div_sc(FREQ, NSEC_PER_SEC, 32);
+	cf_pit_clockevent.max_delta_ns =
+		clockevent_delta2ns(0xFFFF, &cf_pit_clockevent);
+	cf_pit_clockevent.min_delta_ns =
+		clockevent_delta2ns(0x3f, &cf_pit_clockevent);
+	clockevents_register_device(&cf_pit_clockevent);
+
+	setup_irq(MCFINT_VECBASE + MCFINT_PIT1, &pit_irq);
+
+	pit_clk.mult = clocksource_hz2mult(FREQ, pit_clk.shift);
+	clocksource_register(&pit_clk);
+}
+
+/***************************************************************************/
diff --git a/arch/m68k/platform/coldfire/sltimers.c b/arch/m68k/platform/coldfire/sltimers.c
new file mode 100644
index 00000000000..0a1b937c3e1
--- /dev/null
+++ b/arch/m68k/platform/coldfire/sltimers.c
@@ -0,0 +1,145 @@
+/***************************************************************************/
+
+/*
+ *	sltimers.c -- generic ColdFire slice timer support.
+ *
+ *	Copyright (C) 2009-2010, Philippe De Muyter <phdm@macqel.be>
+ *	based on
+ *	timers.c -- generic ColdFire hardware timer support.
+ *	Copyright (C) 1999-2008, Greg Ungerer <gerg@snapgear.com>
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/profile.h>
+#include <linux/clocksource.h>
+#include <asm/io.h>
+#include <asm/traps.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfslt.h>
+#include <asm/mcfsim.h>
+
+/***************************************************************************/
+
+#ifdef CONFIG_HIGHPROFILE
+
+/*
+ *	By default use Slice Timer 1 as the profiler clock timer.
+ */
+#define	PA(a)	(MCF_MBAR + MCFSLT_TIMER1 + (a))
+
+/*
+ *	Choose a reasonably fast profile timer. Make it an odd value to
+ *	try and get good coverage of kernel operations.
+ */
+#define	PROFILEHZ	1013
+
+irqreturn_t mcfslt_profile_tick(int irq, void *dummy)
+{
+	/* Reset Slice Timer 1 */
+	__raw_writel(MCFSLT_SSR_BE | MCFSLT_SSR_TE, PA(MCFSLT_SSR));
+	if (current->pid)
+		profile_tick(CPU_PROFILING);
+	return IRQ_HANDLED;
+}
+
+static struct irqaction mcfslt_profile_irq = {
+	.name	 = "profile timer",
+	.flags	 = IRQF_DISABLED | IRQF_TIMER,
+	.handler = mcfslt_profile_tick,
+};
+
+void mcfslt_profile_init(void)
+{
+	printk(KERN_INFO "PROFILE: lodging TIMER 1 @ %dHz as profile timer\n",
+	       PROFILEHZ);
+
+	setup_irq(MCF_IRQ_PROFILER, &mcfslt_profile_irq);
+
+	/* Set up TIMER 2 as high speed profile clock */
+	__raw_writel(MCF_BUSCLK / PROFILEHZ - 1, PA(MCFSLT_STCNT));
+	__raw_writel(MCFSLT_SCR_RUN | MCFSLT_SCR_IEN | MCFSLT_SCR_TEN,
+								PA(MCFSLT_SCR));
+
+}
+
+#endif	/* CONFIG_HIGHPROFILE */
+
+/***************************************************************************/
+
+/*
+ *	By default use Slice Timer 0 as the system clock timer.
+ */
+#define	TA(a)	(MCF_MBAR + MCFSLT_TIMER0 + (a))
+
+static u32 mcfslt_cycles_per_jiffy;
+static u32 mcfslt_cnt;
+
+static irqreturn_t mcfslt_tick(int irq, void *dummy)
+{
+	/* Reset Slice Timer 0 */
+	__raw_writel(MCFSLT_SSR_BE | MCFSLT_SSR_TE, TA(MCFSLT_SSR));
+	mcfslt_cnt += mcfslt_cycles_per_jiffy;
+	return arch_timer_interrupt(irq, dummy);
+}
+
+static struct irqaction mcfslt_timer_irq = {
+	.name	 = "timer",
+	.flags	 = IRQF_DISABLED | IRQF_TIMER,
+	.handler = mcfslt_tick,
+};
+
+static cycle_t mcfslt_read_clk(struct clocksource *cs)
+{
+	unsigned long flags;
+	u32 cycles;
+	u16 scnt;
+
+	local_irq_save(flags);
+	scnt = __raw_readl(TA(MCFSLT_SCNT));
+	cycles = mcfslt_cnt;
+	local_irq_restore(flags);
+
+	/* substract because slice timers count down */
+	return cycles - scnt;
+}
+
+static struct clocksource mcfslt_clk = {
+	.name	= "slt",
+	.rating	= 250,
+	.read	= mcfslt_read_clk,
+	.shift	= 20,
+	.mask	= CLOCKSOURCE_MASK(32),
+	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+void hw_timer_init(void)
+{
+	mcfslt_cycles_per_jiffy = MCF_BUSCLK / HZ;
+	/*
+	 *	The coldfire slice timer (SLT) runs from STCNT to 0 included,
+	 *	then STCNT again and so on.  It counts thus actually
+	 *	STCNT + 1 steps for 1 tick, not STCNT.  So if you want
+	 *	n cycles, initialize STCNT with n - 1.
+	 */
+	__raw_writel(mcfslt_cycles_per_jiffy - 1, TA(MCFSLT_STCNT));
+	__raw_writel(MCFSLT_SCR_RUN | MCFSLT_SCR_IEN | MCFSLT_SCR_TEN,
+								TA(MCFSLT_SCR));
+	/* initialize mcfslt_cnt knowing that slice timers count down */
+	mcfslt_cnt = mcfslt_cycles_per_jiffy;
+
+	setup_irq(MCF_IRQ_TIMER, &mcfslt_timer_irq);
+
+	mcfslt_clk.mult = clocksource_hz2mult(MCF_BUSCLK, mcfslt_clk.shift);
+	clocksource_register(&mcfslt_clk);
+
+#ifdef CONFIG_HIGHPROFILE
+	mcfslt_profile_init();
+#endif
+}
diff --git a/arch/m68k/platform/coldfire/timers.c b/arch/m68k/platform/coldfire/timers.c
new file mode 100644
index 00000000000..60242f65fea
--- /dev/null
+++ b/arch/m68k/platform/coldfire/timers.c
@@ -0,0 +1,174 @@
+/***************************************************************************/
+
+/*
+ *	timers.c -- generic ColdFire hardware timer support.
+ *
+ *	Copyright (C) 1999-2008, Greg Ungerer <gerg@snapgear.com>
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/profile.h>
+#include <linux/clocksource.h>
+#include <asm/io.h>
+#include <asm/traps.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcftimer.h>
+#include <asm/mcfsim.h>
+
+/***************************************************************************/
+
+/*
+ *	By default use timer1 as the system clock timer.
+ */
+#define	FREQ	(MCF_BUSCLK / 16)
+#define	TA(a)	(MCFTIMER_BASE1 + (a))
+
+/*
+ *	These provide the underlying interrupt vector support.
+ *	Unfortunately it is a little different on each ColdFire.
+ */
+void coldfire_profile_init(void);
+
+#if defined(CONFIG_M532x)
+#define	__raw_readtrr	__raw_readl
+#define	__raw_writetrr	__raw_writel
+#else
+#define	__raw_readtrr	__raw_readw
+#define	__raw_writetrr	__raw_writew
+#endif
+
+static u32 mcftmr_cycles_per_jiffy;
+static u32 mcftmr_cnt;
+
+/***************************************************************************/
+
+static irqreturn_t mcftmr_tick(int irq, void *dummy)
+{
+	/* Reset the ColdFire timer */
+	__raw_writeb(MCFTIMER_TER_CAP | MCFTIMER_TER_REF, TA(MCFTIMER_TER));
+
+	mcftmr_cnt += mcftmr_cycles_per_jiffy;
+	return arch_timer_interrupt(irq, dummy);
+}
+
+/***************************************************************************/
+
+static struct irqaction mcftmr_timer_irq = {
+	.name	 = "timer",
+	.flags	 = IRQF_DISABLED | IRQF_TIMER,
+	.handler = mcftmr_tick,
+};
+
+/***************************************************************************/
+
+static cycle_t mcftmr_read_clk(struct clocksource *cs)
+{
+	unsigned long flags;
+	u32 cycles;
+	u16 tcn;
+
+	local_irq_save(flags);
+	tcn = __raw_readw(TA(MCFTIMER_TCN));
+	cycles = mcftmr_cnt;
+	local_irq_restore(flags);
+
+	return cycles + tcn;
+}
+
+/***************************************************************************/
+
+static struct clocksource mcftmr_clk = {
+	.name	= "tmr",
+	.rating	= 250,
+	.read	= mcftmr_read_clk,
+	.shift	= 20,
+	.mask	= CLOCKSOURCE_MASK(32),
+	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+/***************************************************************************/
+
+void hw_timer_init(void)
+{
+	__raw_writew(MCFTIMER_TMR_DISABLE, TA(MCFTIMER_TMR));
+	mcftmr_cycles_per_jiffy = FREQ / HZ;
+	/*
+	 *	The coldfire timer runs from 0 to TRR included, then 0
+	 *	again and so on.  It counts thus actually TRR + 1 steps
+	 *	for 1 tick, not TRR.  So if you want n cycles,
+	 *	initialize TRR with n - 1.
+	 */
+	__raw_writetrr(mcftmr_cycles_per_jiffy - 1, TA(MCFTIMER_TRR));
+	__raw_writew(MCFTIMER_TMR_ENORI | MCFTIMER_TMR_CLK16 |
+		MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENABLE, TA(MCFTIMER_TMR));
+
+	mcftmr_clk.mult = clocksource_hz2mult(FREQ, mcftmr_clk.shift);
+	clocksource_register(&mcftmr_clk);
+
+	setup_irq(MCF_IRQ_TIMER, &mcftmr_timer_irq);
+
+#ifdef CONFIG_HIGHPROFILE
+	coldfire_profile_init();
+#endif
+}
+
+/***************************************************************************/
+#ifdef CONFIG_HIGHPROFILE
+/***************************************************************************/
+
+/*
+ *	By default use timer2 as the profiler clock timer.
+ */
+#define	PA(a)	(MCFTIMER_BASE2 + (a))
+
+/*
+ *	Choose a reasonably fast profile timer. Make it an odd value to
+ *	try and get good coverage of kernel operations.
+ */
+#define	PROFILEHZ	1013
+
+/*
+ *	Use the other timer to provide high accuracy profiling info.
+ */
+irqreturn_t coldfire_profile_tick(int irq, void *dummy)
+{
+	/* Reset ColdFire timer2 */
+	__raw_writeb(MCFTIMER_TER_CAP | MCFTIMER_TER_REF, PA(MCFTIMER_TER));
+	if (current->pid)
+		profile_tick(CPU_PROFILING);
+	return IRQ_HANDLED;
+}
+
+/***************************************************************************/
+
+static struct irqaction coldfire_profile_irq = {
+	.name	 = "profile timer",
+	.flags	 = IRQF_DISABLED | IRQF_TIMER,
+	.handler = coldfire_profile_tick,
+};
+
+void coldfire_profile_init(void)
+{
+	printk(KERN_INFO "PROFILE: lodging TIMER2 @ %dHz as profile timer\n",
+	       PROFILEHZ);
+
+	/* Set up TIMER 2 as high speed profile clock */
+	__raw_writew(MCFTIMER_TMR_DISABLE, PA(MCFTIMER_TMR));
+
+	__raw_writetrr(((MCF_BUSCLK / 16) / PROFILEHZ), PA(MCFTIMER_TRR));
+	__raw_writew(MCFTIMER_TMR_ENORI | MCFTIMER_TMR_CLK16 |
+		MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENABLE, PA(MCFTIMER_TMR));
+
+	setup_irq(MCF_IRQ_PROFILER, &coldfire_profile_irq);
+}
+
+/***************************************************************************/
+#endif	/* CONFIG_HIGHPROFILE */
+/***************************************************************************/
diff --git a/arch/m68k/platform/coldfire/vectors.c b/arch/m68k/platform/coldfire/vectors.c
new file mode 100644
index 00000000000..a21d3f870b7
--- /dev/null
+++ b/arch/m68k/platform/coldfire/vectors.c
@@ -0,0 +1,80 @@
+/***************************************************************************/
+
+/*
+ *	linux/arch/m68knommu/platform/coldfire/vectors.c
+ *
+ *	Copyright (C) 1999-2007, Greg Ungerer <gerg@snapgear.com>
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <asm/traps.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfwdebug.h>
+
+/***************************************************************************/
+
+#ifdef TRAP_DBG_INTERRUPT
+
+asmlinkage void dbginterrupt_c(struct frame *fp)
+{
+	extern void dump(struct pt_regs *fp);
+	printk(KERN_DEBUG "%s(%d): BUS ERROR TRAP\n", __FILE__, __LINE__);
+	dump((struct pt_regs *) fp);
+	asm("halt");
+}
+
+#endif
+
+/***************************************************************************/
+
+extern e_vector	*_ramvec;
+
+void set_evector(int vecnum, void (*handler)(void))
+{
+	if (vecnum >= 0 && vecnum <= 255)
+		_ramvec[vecnum] = handler;
+}
+
+/***************************************************************************/
+
+/* Assembler routines */
+asmlinkage void buserr(void);
+asmlinkage void trap(void);
+asmlinkage void system_call(void);
+asmlinkage void inthandler(void);
+
+void __init init_vectors(void)
+{
+	int i;
+
+	/*
+	 *	There is a common trap handler and common interrupt
+	 *	handler that handle almost every vector. We treat
+	 *	the system call and bus error special, they get their
+	 *	own first level handlers.
+	 */
+	for (i = 3; (i <= 23); i++)
+		_ramvec[i] = trap;
+	for (i = 33; (i <= 63); i++)
+		_ramvec[i] = trap;
+	for (i = 24; (i <= 31); i++)
+		_ramvec[i] = inthandler;
+	for (i = 64; (i < 255); i++)
+		_ramvec[i] = inthandler;
+	_ramvec[255] = 0;
+
+	_ramvec[2] = buserr;
+	_ramvec[32] = system_call;
+
+#ifdef TRAP_DBG_INTERRUPT
+	_ramvec[12] = dbginterrupt;
+#endif
+}
+
+/***************************************************************************/