m68knommu: merge common ColdFire QSPI platform setup code

The ColdFire QSPI is common to quite a few ColdFire CPUs. No need to duplicate
its platform setup code for every CPU family member that has it. Merge all the
setup code into a single shared file.

This also results in few platforms no longer needing any local platform
setup code. In those cases remove the empty devices array and initcall
code as well.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>

1 files changed, 161 insertions, 1 deletions

diff --git a/arch/m68k/platform/coldfire/device.c b/arch/m68k/platform/coldfire/device.c
index 24b0d5e5350..fa50c48292f 100644
--- a/arch/m68k/platform/coldfire/device.c
+++ b/arch/m68k/platform/coldfire/device.c
@@ -11,10 +11,13 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/spi/spi.h>
+#include <linux/gpio.h>
 #include <asm/traps.h>
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
 #include <asm/mcfuart.h>
+#include <asm/mcfqspi.h>
 
 /*
  *	All current ColdFire parts contain from 2, 3 or 4 UARTS.
@@ -118,6 +121,161 @@ static struct platform_device mcf_fec1 = {
 #endif /* MCFFEC_BASE1 */
 #endif /* CONFIG_FEC */
 
+#ifdef CONFIG_SPI_COLDFIRE_QSPI
+/*
+ *	The ColdFire QSPI module is an SPI protocol hardware block used
+ *	on a number of different ColdFire CPUs.
+ */
+static struct resource mcf_qspi_resources[] = {
+	{
+		.start		= MCFQSPI_BASE,
+		.end		= MCFQSPI_BASE + MCFQSPI_SIZE - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= MCF_IRQ_QSPI,
+		.end		= MCF_IRQ_QSPI,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static int mcf_cs_setup(struct mcfqspi_cs_control *cs_control)
+{
+	int status;
+
+	status = gpio_request(MCFQSPI_CS0, "MCFQSPI_CS0");
+	if (status) {
+		pr_debug("gpio_request for MCFQSPI_CS0 failed\n");
+		goto fail0;
+	}
+	status = gpio_direction_output(MCFQSPI_CS0, 1);
+	if (status) {
+		pr_debug("gpio_direction_output for MCFQSPI_CS0 failed\n");
+		goto fail1;
+	}
+
+	status = gpio_request(MCFQSPI_CS1, "MCFQSPI_CS1");
+	if (status) {
+		pr_debug("gpio_request for MCFQSPI_CS1 failed\n");
+		goto fail1;
+	}
+	status = gpio_direction_output(MCFQSPI_CS1, 1);
+	if (status) {
+		pr_debug("gpio_direction_output for MCFQSPI_CS1 failed\n");
+		goto fail2;
+	}
+
+	status = gpio_request(MCFQSPI_CS2, "MCFQSPI_CS2");
+	if (status) {
+		pr_debug("gpio_request for MCFQSPI_CS2 failed\n");
+		goto fail2;
+	}
+	status = gpio_direction_output(MCFQSPI_CS2, 1);
+	if (status) {
+		pr_debug("gpio_direction_output for MCFQSPI_CS2 failed\n");
+		goto fail3;
+	}
+
+#ifdef MCFQSPI_CS3
+	status = gpio_request(MCFQSPI_CS3, "MCFQSPI_CS3");
+	if (status) {
+		pr_debug("gpio_request for MCFQSPI_CS3 failed\n");
+		goto fail3;
+	}
+	status = gpio_direction_output(MCFQSPI_CS3, 1);
+	if (status) {
+		pr_debug("gpio_direction_output for MCFQSPI_CS3 failed\n");
+		gpio_free(MCFQSPI_CS3);
+		goto fail3;
+	}
+#endif
+
+	return 0;
+
+fail3:
+	gpio_free(MCFQSPI_CS2);
+fail2:
+	gpio_free(MCFQSPI_CS1);
+fail1:
+	gpio_free(MCFQSPI_CS0);
+fail0:
+	return status;
+}
+
+static void mcf_cs_teardown(struct mcfqspi_cs_control *cs_control)
+{
+#ifdef MCFQSPI_CS3
+	gpio_free(MCFQSPI_CS3);
+#endif
+	gpio_free(MCFQSPI_CS2);
+	gpio_free(MCFQSPI_CS1);
+	gpio_free(MCFQSPI_CS0);
+}
+
+static void mcf_cs_select(struct mcfqspi_cs_control *cs_control,
+			  u8 chip_select, bool cs_high)
+{
+	switch (chip_select) {
+	case 0:
+		gpio_set_value(MCFQSPI_CS0, cs_high);
+		break;
+	case 1:
+		gpio_set_value(MCFQSPI_CS1, cs_high);
+		break;
+	case 2:
+		gpio_set_value(MCFQSPI_CS2, cs_high);
+		break;
+#ifdef MCFQSPI_CS3
+	case 3:
+		gpio_set_value(MCFQSPI_CS3, cs_high);
+		break;
+#endif
+	}
+}
+
+static void mcf_cs_deselect(struct mcfqspi_cs_control *cs_control,
+			    u8 chip_select, bool cs_high)
+{
+	switch (chip_select) {
+	case 0:
+		gpio_set_value(MCFQSPI_CS0, !cs_high);
+		break;
+	case 1:
+		gpio_set_value(MCFQSPI_CS1, !cs_high);
+		break;
+	case 2:
+		gpio_set_value(MCFQSPI_CS2, !cs_high);
+		break;
+#ifdef MCFQSPI_CS3
+	case 3:
+		gpio_set_value(MCFQSPI_CS3, !cs_high);
+		break;
+#endif
+	}
+}
+
+static struct mcfqspi_cs_control mcf_cs_control = {
+	.setup			= mcf_cs_setup,
+	.teardown		= mcf_cs_teardown,
+	.select			= mcf_cs_select,
+	.deselect		= mcf_cs_deselect,
+};
+
+static struct mcfqspi_platform_data mcf_qspi_data = {
+	.bus_num		= 0,
+	.num_chipselect		= 4,
+	.cs_control		= &mcf_cs_control,
+};
+
+static struct platform_device mcf_qspi = {
+	.name			= "mcfqspi",
+	.id			= 0,
+	.num_resources		= ARRAY_SIZE(mcf_qspi_resources),
+	.resource		= mcf_qspi_resources,
+	.dev.platform_data	= &mcf_qspi_data,
+};
+#endif /* CONFIG_SPI_COLDFIRE_QSPI */
+
 static struct platform_device *mcf_devices[] __initdata = {
 	&mcf_uart,
 #ifdef CONFIG_FEC
@@ -126,9 +284,11 @@ static struct platform_device *mcf_devices[] __initdata = {
 	&mcf_fec1,
 #endif
 #endif
+#ifdef CONFIG_SPI_COLDFIRE_QSPI
+	&mcf_qspi,
+#endif
 };
 
-
 /*
  *	Some ColdFire UARTs let you set the IRQ line to use.
  */