Merge branch 'master' into next

139 files changed, 15831 insertions, 0 deletions

diff --git a/arch/m68knommu/include/asm/Kbuild b/arch/m68knommu/include/asm/Kbuild
new file mode 100644
index 00000000000..c68e1680da0
--- /dev/null
+++ b/arch/m68knommu/include/asm/Kbuild
@@ -0,0 +1 @@
+include include/asm-generic/Kbuild.asm
diff --git a/arch/m68knommu/include/asm/MC68328.h b/arch/m68knommu/include/asm/MC68328.h
new file mode 100644
index 00000000000..a337e56d09b
--- /dev/null
+++ b/arch/m68knommu/include/asm/MC68328.h
@@ -0,0 +1,1266 @@
+
+/* include/asm-m68knommu/MC68328.h: '328 control registers
+ *
+ * Copyright (C) 1999  Vladimir Gurevich <vgurevic@cisco.com>
+ *                     Bear & Hare Software, Inc.
+ *
+ * Based on include/asm-m68knommu/MC68332.h
+ * Copyright (C) 1998  Kenneth Albanowski <kjahds@kjahds.com>,
+ *
+ */
+
+#ifndef _MC68328_H_
+#define _MC68328_H_
+
+#define BYTE_REF(addr) (*((volatile unsigned char*)addr))
+#define WORD_REF(addr) (*((volatile unsigned short*)addr))
+#define LONG_REF(addr) (*((volatile unsigned long*)addr))
+
+#define PUT_FIELD(field, val) (((val) << field##_SHIFT) & field##_MASK)
+#define GET_FIELD(reg, field) (((reg) & field##_MASK) >> field##_SHIFT)
+
+/********** 
+ *
+ * 0xFFFFF0xx -- System Control
+ *
+ **********/
+ 
+/*
+ * System Control Register (SCR)
+ */
+#define SCR_ADDR	0xfffff000
+#define SCR		BYTE_REF(SCR_ADDR)
+
+#define SCR_WDTH8	0x01	/* 8-Bit Width Select */
+#define SCR_DMAP	0x04	/* Double Map */
+#define SCR_SO		0x08	/* Supervisor Only */
+#define SCR_BETEN	0x10	/* Bus-Error Time-Out Enable */
+#define SCR_PRV		0x20	/* Privilege Violation */
+#define SCR_WPV		0x40	/* Write Protect Violation */
+#define SCR_BETO	0x80	/* Bus-Error TimeOut */
+
+/*
+ * Mask Revision Register
+ */
+#define MRR_ADDR 0xfffff004
+#define MRR      LONG_REF(MRR_ADDR)
+ 
+/********** 
+ *
+ * 0xFFFFF1xx -- Chip-Select logic
+ *
+ **********/
+
+/********** 
+ *
+ * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control
+ *
+ **********/
+
+/*
+ * Group Base Address Registers
+ */
+#define GRPBASEA_ADDR	0xfffff100
+#define GRPBASEB_ADDR	0xfffff102
+#define GRPBASEC_ADDR	0xfffff104
+#define GRPBASED_ADDR	0xfffff106
+
+#define GRPBASEA	WORD_REF(GRPBASEA_ADDR)
+#define GRPBASEB	WORD_REF(GRPBASEB_ADDR)
+#define GRPBASEC	WORD_REF(GRPBASEC_ADDR)
+#define GRPBASED	WORD_REF(GRPBASED_ADDR)
+
+#define GRPBASE_V	  0x0001	/* Valid */
+#define GRPBASE_GBA_MASK  0xfff0	/* Group Base Address (bits 31-20) */
+
+/*
+ * Group Base Address Mask Registers 
+ */
+#define GRPMASKA_ADDR	0xfffff108
+#define GRPMASKB_ADDR	0xfffff10a
+#define GRPMASKC_ADDR	0xfffff10c
+#define GRPMASKD_ADDR	0xfffff10e
+
+#define GRPMASKA	WORD_REF(GRPMASKA_ADDR)
+#define GRPMASKB	WORD_REF(GRPMASKB_ADDR)
+#define GRPMASKC	WORD_REF(GRPMASKC_ADDR)
+#define GRPMASKD	WORD_REF(GRPMASKD_ADDR)
+
+#define GRMMASK_GMA_MASK 0xfffff0	/* Group Base Mask (bits 31-20) */
+
+/*
+ * Chip-Select Option Registers (group A)
+ */
+#define CSA0_ADDR	0xfffff110
+#define CSA1_ADDR	0xfffff114
+#define CSA2_ADDR	0xfffff118
+#define CSA3_ADDR	0xfffff11c
+
+#define CSA0		LONG_REF(CSA0_ADDR)
+#define CSA1		LONG_REF(CSA1_ADDR)
+#define CSA2		LONG_REF(CSA2_ADDR)
+#define CSA3		LONG_REF(CSA3_ADDR)
+
+#define CSA_WAIT_MASK	0x00000007	/* Wait State Selection */
+#define CSA_WAIT_SHIFT	0
+#define CSA_RO		0x00000008	/* Read-Only */
+#define CSA_AM_MASK	0x0000ff00	/* Address Mask (bits 23-16) */
+#define CSA_AM_SHIFT	8
+#define CSA_BUSW	0x00010000	/* Bus Width Select */
+#define CSA_AC_MASK	0xff000000	/* Address Compare (bits 23-16) */
+#define CSA_AC_SHIFT	24
+
+/*
+ * Chip-Select Option Registers (group B)
+ */
+#define CSB0_ADDR	0xfffff120
+#define CSB1_ADDR	0xfffff124
+#define CSB2_ADDR	0xfffff128
+#define CSB3_ADDR	0xfffff12c
+
+#define CSB0		LONG_REF(CSB0_ADDR)
+#define CSB1		LONG_REF(CSB1_ADDR)
+#define CSB2		LONG_REF(CSB2_ADDR)
+#define CSB3		LONG_REF(CSB3_ADDR)
+
+#define CSB_WAIT_MASK	0x00000007	/* Wait State Selection */
+#define CSB_WAIT_SHIFT	0
+#define CSB_RO		0x00000008	/* Read-Only */
+#define CSB_AM_MASK	0x0000ff00	/* Address Mask (bits 23-16) */
+#define CSB_AM_SHIFT	8
+#define CSB_BUSW	0x00010000	/* Bus Width Select */
+#define CSB_AC_MASK	0xff000000	/* Address Compare (bits 23-16) */
+#define CSB_AC_SHIFT	24
+
+/*
+ * Chip-Select Option Registers (group C)
+ */
+#define CSC0_ADDR	0xfffff130
+#define CSC1_ADDR	0xfffff134
+#define CSC2_ADDR	0xfffff138
+#define CSC3_ADDR	0xfffff13c
+
+#define CSC0		LONG_REF(CSC0_ADDR)
+#define CSC1		LONG_REF(CSC1_ADDR)
+#define CSC2		LONG_REF(CSC2_ADDR)
+#define CSC3		LONG_REF(CSC3_ADDR)
+
+#define CSC_WAIT_MASK	0x00000007	/* Wait State Selection */
+#define CSC_WAIT_SHIFT	0
+#define CSC_RO		0x00000008	/* Read-Only */
+#define CSC_AM_MASK	0x0000fff0	/* Address Mask (bits 23-12) */
+#define CSC_AM_SHIFT	4
+#define CSC_BUSW	0x00010000	/* Bus Width Select */
+#define CSC_AC_MASK	0xfff00000	/* Address Compare (bits 23-12) */
+#define CSC_AC_SHIFT	20
+
+/*
+ * Chip-Select Option Registers (group D)
+ */
+#define CSD0_ADDR	0xfffff140
+#define CSD1_ADDR	0xfffff144
+#define CSD2_ADDR	0xfffff148
+#define CSD3_ADDR	0xfffff14c
+
+#define CSD0		LONG_REF(CSD0_ADDR)
+#define CSD1		LONG_REF(CSD1_ADDR)
+#define CSD2		LONG_REF(CSD2_ADDR)
+#define CSD3		LONG_REF(CSD3_ADDR)
+
+#define CSD_WAIT_MASK	0x00000007	/* Wait State Selection */
+#define CSD_WAIT_SHIFT	0
+#define CSD_RO		0x00000008	/* Read-Only */
+#define CSD_AM_MASK	0x0000fff0	/* Address Mask (bits 23-12) */
+#define CSD_AM_SHIFT	4
+#define CSD_BUSW	0x00010000	/* Bus Width Select */
+#define CSD_AC_MASK	0xfff00000	/* Address Compare (bits 23-12) */
+#define CSD_AC_SHIFT	20
+
+/**********
+ *
+ * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control
+ *
+ **********/
+ 
+/*
+ * PLL Control Register 
+ */
+#define PLLCR_ADDR	0xfffff200
+#define PLLCR		WORD_REF(PLLCR_ADDR)
+
+#define PLLCR_DISPLL	       0x0008	/* Disable PLL */
+#define PLLCR_CLKEN	       0x0010	/* Clock (CLKO pin) enable */
+#define PLLCR_SYSCLK_SEL_MASK  0x0700	/* System Clock Selection */
+#define PLLCR_SYSCLK_SEL_SHIFT 8
+#define PLLCR_PIXCLK_SEL_MASK  0x3800	/* LCD Clock Selection */
+#define PLLCR_PIXCLK_SEL_SHIFT 11
+
+/* 'EZ328-compatible definitions */
+#define PLLCR_LCDCLK_SEL_MASK	PLLCR_PIXCLK_SEL_MASK
+#define PLLCR_LCDCLK_SEL_SHIFT	PLLCR_PIXCLK_SEL_SHIFT
+
+/*
+ * PLL Frequency Select Register
+ */
+#define PLLFSR_ADDR	0xfffff202
+#define PLLFSR		WORD_REF(PLLFSR_ADDR)
+
+#define PLLFSR_PC_MASK	0x00ff		/* P Count */
+#define PLLFSR_PC_SHIFT 0
+#define PLLFSR_QC_MASK	0x0f00		/* Q Count */
+#define PLLFSR_QC_SHIFT 8
+#define PLLFSR_PROT	0x4000		/* Protect P & Q */
+#define PLLFSR_CLK32	0x8000		/* Clock 32 (kHz) */
+
+/*
+ * Power Control Register
+ */
+#define PCTRL_ADDR	0xfffff207
+#define PCTRL		BYTE_REF(PCTRL_ADDR)
+
+#define PCTRL_WIDTH_MASK	0x1f	/* CPU Clock bursts width */
+#define PCTRL_WIDTH_SHIFT	0
+#define PCTRL_STOP		0x40	/* Enter power-save mode immediately */ 
+#define PCTRL_PCEN		0x80	/* Power Control Enable */
+
+/**********
+ *
+ * 0xFFFFF3xx -- Interrupt Controller
+ *
+ **********/
+
+/* 
+ * Interrupt Vector Register
+ */
+#define IVR_ADDR	0xfffff300
+#define IVR		BYTE_REF(IVR_ADDR)
+
+#define IVR_VECTOR_MASK 0xF8
+
+/*
+ * Interrupt control Register
+ */
+#define ICR_ADRR	0xfffff302
+#define ICR		WORD_REF(ICR_ADDR)
+
+#define ICR_ET6		0x0100	/* Edge Trigger Select for IRQ6 */
+#define ICR_ET3		0x0200	/* Edge Trigger Select for IRQ3 */
+#define ICR_ET2		0x0400	/* Edge Trigger Select for IRQ2 */
+#define ICR_ET1		0x0800	/* Edge Trigger Select for IRQ1 */
+#define ICR_POL6	0x1000	/* Polarity Control for IRQ6 */
+#define ICR_POL3	0x2000	/* Polarity Control for IRQ3 */
+#define ICR_POL2	0x4000	/* Polarity Control for IRQ2 */
+#define ICR_POL1	0x8000	/* Polarity Control for IRQ1 */
+
+/*
+ * Interrupt Mask Register
+ */
+#define IMR_ADDR	0xfffff304
+#define IMR		LONG_REF(IMR_ADDR)
+ 
+/*
+ * Define the names for bit positions first. This is useful for
+ * request_irq
+ */
+#define SPIM_IRQ_NUM	0	/* SPI Master interrupt */
+#define	TMR2_IRQ_NUM	1	/* Timer 2 interrupt */
+#define UART_IRQ_NUM	2	/* UART interrupt */	
+#define	WDT_IRQ_NUM	3	/* Watchdog Timer interrupt */
+#define RTC_IRQ_NUM	4	/* RTC interrupt */
+#define	KB_IRQ_NUM	6	/* Keyboard Interrupt */
+#define PWM_IRQ_NUM	7	/* Pulse-Width Modulator int. */
+#define	INT0_IRQ_NUM	8	/* External INT0 */
+#define	INT1_IRQ_NUM	9	/* External INT1 */
+#define	INT2_IRQ_NUM	10	/* External INT2 */
+#define	INT3_IRQ_NUM	11	/* External INT3 */
+#define	INT4_IRQ_NUM	12	/* External INT4 */
+#define	INT5_IRQ_NUM	13	/* External INT5 */
+#define	INT6_IRQ_NUM	14	/* External INT6 */
+#define	INT7_IRQ_NUM	15	/* External INT7 */
+#define IRQ1_IRQ_NUM	16	/* IRQ1 */
+#define IRQ2_IRQ_NUM	17	/* IRQ2 */
+#define IRQ3_IRQ_NUM	18	/* IRQ3 */
+#define IRQ6_IRQ_NUM	19	/* IRQ6 */
+#define PEN_IRQ_NUM	20	/* Pen Interrupt */
+#define SPIS_IRQ_NUM	21	/* SPI Slave Interrupt */
+#define TMR1_IRQ_NUM	22	/* Timer 1 interrupt */
+#define IRQ7_IRQ_NUM	23	/* IRQ7 */
+
+/* '328-compatible definitions */
+#define SPI_IRQ_NUM	SPIM_IRQ_NUM
+#define TMR_IRQ_NUM	TMR1_IRQ_NUM
+ 
+/*
+ * Here go the bitmasks themselves
+ */
+#define IMR_MSPIM 	(1 << SPIM _IRQ_NUM)	/* Mask SPI Master interrupt */
+#define	IMR_MTMR2	(1 << TMR2_IRQ_NUM)	/* Mask Timer 2 interrupt */
+#define IMR_MUART	(1 << UART_IRQ_NUM)	/* Mask UART interrupt */	
+#define	IMR_MWDT	(1 << WDT_IRQ_NUM)	/* Mask Watchdog Timer interrupt */
+#define IMR_MRTC	(1 << RTC_IRQ_NUM)	/* Mask RTC interrupt */
+#define	IMR_MKB		(1 << KB_IRQ_NUM)	/* Mask Keyboard Interrupt */
+#define IMR_MPWM	(1 << PWM_IRQ_NUM)	/* Mask Pulse-Width Modulator int. */
+#define	IMR_MINT0	(1 << INT0_IRQ_NUM)	/* Mask External INT0 */
+#define	IMR_MINT1	(1 << INT1_IRQ_NUM)	/* Mask External INT1 */
+#define	IMR_MINT2	(1 << INT2_IRQ_NUM)	/* Mask External INT2 */
+#define	IMR_MINT3	(1 << INT3_IRQ_NUM)	/* Mask External INT3 */
+#define	IMR_MINT4	(1 << INT4_IRQ_NUM)	/* Mask External INT4 */
+#define	IMR_MINT5	(1 << INT5_IRQ_NUM)	/* Mask External INT5 */
+#define	IMR_MINT6	(1 << INT6_IRQ_NUM)	/* Mask External INT6 */
+#define	IMR_MINT7	(1 << INT7_IRQ_NUM)	/* Mask External INT7 */
+#define IMR_MIRQ1	(1 << IRQ1_IRQ_NUM)	/* Mask IRQ1 */
+#define IMR_MIRQ2	(1 << IRQ2_IRQ_NUM)	/* Mask IRQ2 */
+#define IMR_MIRQ3	(1 << IRQ3_IRQ_NUM)	/* Mask IRQ3 */
+#define IMR_MIRQ6	(1 << IRQ6_IRQ_NUM)	/* Mask IRQ6 */
+#define IMR_MPEN	(1 << PEN_IRQ_NUM)	/* Mask Pen Interrupt */
+#define IMR_MSPIS	(1 << SPIS_IRQ_NUM)	/* Mask SPI Slave Interrupt */
+#define IMR_MTMR1	(1 << TMR1_IRQ_NUM)	/* Mask Timer 1 interrupt */
+#define IMR_MIRQ7	(1 << IRQ7_IRQ_NUM)	/* Mask IRQ7 */
+
+/* 'EZ328-compatible definitions */
+#define IMR_MSPI	IMR_MSPIM
+#define IMR_MTMR	IMR_MTMR1
+
+/* 
+ * Interrupt Wake-Up Enable Register
+ */
+#define IWR_ADDR	0xfffff308
+#define IWR		LONG_REF(IWR_ADDR)
+
+#define IWR_SPIM 	(1 << SPIM _IRQ_NUM)	/* SPI Master interrupt */
+#define	IWR_TMR2	(1 << TMR2_IRQ_NUM)	/* Timer 2 interrupt */
+#define IWR_UART	(1 << UART_IRQ_NUM)	/* UART interrupt */	
+#define	IWR_WDT		(1 << WDT_IRQ_NUM)	/* Watchdog Timer interrupt */
+#define IWR_RTC		(1 << RTC_IRQ_NUM)	/* RTC interrupt */
+#define	IWR_KB		(1 << KB_IRQ_NUM)	/* Keyboard Interrupt */
+#define IWR_PWM		(1 << PWM_IRQ_NUM)	/* Pulse-Width Modulator int. */
+#define	IWR_INT0	(1 << INT0_IRQ_NUM)	/* External INT0 */
+#define	IWR_INT1	(1 << INT1_IRQ_NUM)	/* External INT1 */
+#define	IWR_INT2	(1 << INT2_IRQ_NUM)	/* External INT2 */
+#define	IWR_INT3	(1 << INT3_IRQ_NUM)	/* External INT3 */
+#define	IWR_INT4	(1 << INT4_IRQ_NUM)	/* External INT4 */
+#define	IWR_INT5	(1 << INT5_IRQ_NUM)	/* External INT5 */
+#define	IWR_INT6	(1 << INT6_IRQ_NUM)	/* External INT6 */
+#define	IWR_INT7	(1 << INT7_IRQ_NUM)	/* External INT7 */
+#define IWR_IRQ1	(1 << IRQ1_IRQ_NUM)	/* IRQ1 */
+#define IWR_IRQ2	(1 << IRQ2_IRQ_NUM)	/* IRQ2 */
+#define IWR_IRQ3	(1 << IRQ3_IRQ_NUM)	/* IRQ3 */
+#define IWR_IRQ6	(1 << IRQ6_IRQ_NUM)	/* IRQ6 */
+#define IWR_PEN		(1 << PEN_IRQ_NUM)	/* Pen Interrupt */
+#define IWR_SPIS	(1 << SPIS_IRQ_NUM)	/* SPI Slave Interrupt */
+#define IWR_TMR1	(1 << TMR1_IRQ_NUM)	/* Timer 1 interrupt */
+#define IWR_IRQ7	(1 << IRQ7_IRQ_NUM)	/* IRQ7 */
+
+/* 
+ * Interrupt Status Register 
+ */
+#define ISR_ADDR	0xfffff30c
+#define ISR		LONG_REF(ISR_ADDR)
+
+#define ISR_SPIM 	(1 << SPIM _IRQ_NUM)	/* SPI Master interrupt */
+#define	ISR_TMR2	(1 << TMR2_IRQ_NUM)	/* Timer 2 interrupt */
+#define ISR_UART	(1 << UART_IRQ_NUM)	/* UART interrupt */	
+#define	ISR_WDT		(1 << WDT_IRQ_NUM)	/* Watchdog Timer interrupt */
+#define ISR_RTC		(1 << RTC_IRQ_NUM)	/* RTC interrupt */
+#define	ISR_KB		(1 << KB_IRQ_NUM)	/* Keyboard Interrupt */
+#define ISR_PWM		(1 << PWM_IRQ_NUM)	/* Pulse-Width Modulator int. */
+#define	ISR_INT0	(1 << INT0_IRQ_NUM)	/* External INT0 */
+#define	ISR_INT1	(1 << INT1_IRQ_NUM)	/* External INT1 */
+#define	ISR_INT2	(1 << INT2_IRQ_NUM)	/* External INT2 */
+#define	ISR_INT3	(1 << INT3_IRQ_NUM)	/* External INT3 */
+#define	ISR_INT4	(1 << INT4_IRQ_NUM)	/* External INT4 */
+#define	ISR_INT5	(1 << INT5_IRQ_NUM)	/* External INT5 */
+#define	ISR_INT6	(1 << INT6_IRQ_NUM)	/* External INT6 */
+#define	ISR_INT7	(1 << INT7_IRQ_NUM)	/* External INT7 */
+#define ISR_IRQ1	(1 << IRQ1_IRQ_NUM)	/* IRQ1 */
+#define ISR_IRQ2	(1 << IRQ2_IRQ_NUM)	/* IRQ2 */
+#define ISR_IRQ3	(1 << IRQ3_IRQ_NUM)	/* IRQ3 */
+#define ISR_IRQ6	(1 << IRQ6_IRQ_NUM)	/* IRQ6 */
+#define ISR_PEN		(1 << PEN_IRQ_NUM)	/* Pen Interrupt */
+#define ISR_SPIS	(1 << SPIS_IRQ_NUM)	/* SPI Slave Interrupt */
+#define ISR_TMR1	(1 << TMR1_IRQ_NUM)	/* Timer 1 interrupt */
+#define ISR_IRQ7	(1 << IRQ7_IRQ_NUM)	/* IRQ7 */
+
+/* 'EZ328-compatible definitions */
+#define ISR_SPI	ISR_SPIM
+#define ISR_TMR	ISR_TMR1
+
+/* 
+ * Interrupt Pending Register 
+ */
+#define IPR_ADDR	0xfffff310
+#define IPR		LONG_REF(IPR_ADDR)
+
+#define IPR_SPIM 	(1 << SPIM _IRQ_NUM)	/* SPI Master interrupt */
+#define	IPR_TMR2	(1 << TMR2_IRQ_NUM)	/* Timer 2 interrupt */
+#define IPR_UART	(1 << UART_IRQ_NUM)	/* UART interrupt */	
+#define	IPR_WDT		(1 << WDT_IRQ_NUM)	/* Watchdog Timer interrupt */
+#define IPR_RTC		(1 << RTC_IRQ_NUM)	/* RTC interrupt */
+#define	IPR_KB		(1 << KB_IRQ_NUM)	/* Keyboard Interrupt */
+#define IPR_PWM		(1 << PWM_IRQ_NUM)	/* Pulse-Width Modulator int. */
+#define	IPR_INT0	(1 << INT0_IRQ_NUM)	/* External INT0 */
+#define	IPR_INT1	(1 << INT1_IRQ_NUM)	/* External INT1 */
+#define	IPR_INT2	(1 << INT2_IRQ_NUM)	/* External INT2 */
+#define	IPR_INT3	(1 << INT3_IRQ_NUM)	/* External INT3 */
+#define	IPR_INT4	(1 << INT4_IRQ_NUM)	/* External INT4 */
+#define	IPR_INT5	(1 << INT5_IRQ_NUM)	/* External INT5 */
+#define	IPR_INT6	(1 << INT6_IRQ_NUM)	/* External INT6 */
+#define	IPR_INT7	(1 << INT7_IRQ_NUM)	/* External INT7 */
+#define IPR_IRQ1	(1 << IRQ1_IRQ_NUM)	/* IRQ1 */
+#define IPR_IRQ2	(1 << IRQ2_IRQ_NUM)	/* IRQ2 */
+#define IPR_IRQ3	(1 << IRQ3_IRQ_NUM)	/* IRQ3 */
+#define IPR_IRQ6	(1 << IRQ6_IRQ_NUM)	/* IRQ6 */
+#define IPR_PEN		(1 << PEN_IRQ_NUM)	/* Pen Interrupt */
+#define IPR_SPIS	(1 << SPIS_IRQ_NUM)	/* SPI Slave Interrupt */
+#define IPR_TMR1	(1 << TMR1_IRQ_NUM)	/* Timer 1 interrupt */
+#define IPR_IRQ7	(1 << IRQ7_IRQ_NUM)	/* IRQ7 */
+
+/* 'EZ328-compatible definitions */
+#define IPR_SPI	IPR_SPIM
+#define IPR_TMR	IPR_TMR1
+
+/**********
+ *
+ * 0xFFFFF4xx -- Parallel Ports
+ *
+ **********/
+
+/*
+ * Port A
+ */
+#define PADIR_ADDR	0xfffff400		/* Port A direction reg */
+#define PADATA_ADDR	0xfffff401		/* Port A data register */
+#define PASEL_ADDR	0xfffff403		/* Port A Select register */
+
+#define PADIR		BYTE_REF(PADIR_ADDR)
+#define PADATA		BYTE_REF(PADATA_ADDR)
+#define PASEL		BYTE_REF(PASEL_ADDR)
+
+#define PA(x)           (1 << (x))
+#define PA_A(x)		PA((x) - 16)	/* This is specific to PA only! */
+
+#define PA_A16		PA(0)		/* Use A16 as PA(0) */
+#define PA_A17		PA(1)		/* Use A17 as PA(1) */
+#define PA_A18		PA(2)		/* Use A18 as PA(2) */
+#define PA_A19		PA(3)		/* Use A19 as PA(3) */
+#define PA_A20		PA(4)		/* Use A20 as PA(4) */
+#define PA_A21		PA(5)		/* Use A21 as PA(5) */
+#define PA_A22		PA(6)		/* Use A22 as PA(6) */
+#define PA_A23		PA(7)		/* Use A23 as PA(7) */
+
+/* 
+ * Port B
+ */
+#define PBDIR_ADDR	0xfffff408		/* Port B direction reg */
+#define PBDATA_ADDR	0xfffff409		/* Port B data register */
+#define PBSEL_ADDR	0xfffff40b		/* Port B Select Register */
+
+#define PBDIR		BYTE_REF(PBDIR_ADDR)
+#define PBDATA		BYTE_REF(PBDATA_ADDR)
+#define PBSEL		BYTE_REF(PBSEL_ADDR)
+
+#define PB(x)           (1 << (x))
+#define PB_D(x)		PB(x)		/* This is specific to port B only */
+
+#define PB_D0		PB(0)		/* Use D0 as PB(0) */
+#define PB_D1		PB(1)		/* Use D1 as PB(1) */
+#define PB_D2		PB(2)		/* Use D2 as PB(2) */
+#define PB_D3		PB(3)		/* Use D3 as PB(3) */
+#define PB_D4		PB(4)		/* Use D4 as PB(4) */
+#define PB_D5		PB(5)		/* Use D5 as PB(5) */
+#define PB_D6		PB(6)		/* Use D6 as PB(6) */
+#define PB_D7		PB(7)		/* Use D7 as PB(7) */
+
+/* 
+ * Port C
+ */
+#define PCDIR_ADDR	0xfffff410		/* Port C direction reg */
+#define PCDATA_ADDR	0xfffff411		/* Port C data register */
+#define PCSEL_ADDR	0xfffff413		/* Port C Select Register */
+
+#define PCDIR		BYTE_REF(PCDIR_ADDR)
+#define PCDATA		BYTE_REF(PCDATA_ADDR)
+#define PCSEL		BYTE_REF(PCSEL_ADDR)
+
+#define PC(x)           (1 << (x))
+
+#define PC_WE		PC(6)		/* Use WE    as PC(6) */
+#define PC_DTACK	PC(5)		/* Use DTACK as PC(5) */
+#define PC_IRQ7		PC(4)		/* Use IRQ7  as PC(4) */
+#define PC_LDS		PC(2)		/* Use LDS   as PC(2) */
+#define PC_UDS		PC(1)		/* Use UDS   as PC(1) */
+#define PC_MOCLK	PC(0)		/* Use MOCLK as PC(0) */
+
+/* 
+ * Port D
+ */
+#define PDDIR_ADDR	0xfffff418		/* Port D direction reg */
+#define PDDATA_ADDR	0xfffff419		/* Port D data register */
+#define PDPUEN_ADDR	0xfffff41a		/* Port D Pull-Up enable reg */
+#define PDPOL_ADDR	0xfffff41c		/* Port D Polarity Register */
+#define PDIRQEN_ADDR	0xfffff41d		/* Port D IRQ enable register */
+#define	PDIQEG_ADDR	0xfffff41f		/* Port D IRQ Edge Register */
+
+#define PDDIR		BYTE_REF(PDDIR_ADDR)
+#define PDDATA		BYTE_REF(PDDATA_ADDR)
+#define PDPUEN		BYTE_REF(PDPUEN_ADDR)
+#define	PDPOL		BYTE_REF(PDPOL_ADDR)
+#define PDIRQEN		BYTE_REF(PDIRQEN_ADDR)
+#define PDIQEG		BYTE_REF(PDIQEG_ADDR)
+
+#define PD(x)           (1 << (x))
+#define PD_KB(x)	PD(x)		/* This is specific for Port D only */
+
+#define PD_KB0		PD(0)	/* Use KB0 as PD(0) */
+#define PD_KB1		PD(1)	/* Use KB1 as PD(1) */
+#define PD_KB2		PD(2)	/* Use KB2 as PD(2) */
+#define PD_KB3		PD(3)	/* Use KB3 as PD(3) */
+#define PD_KB4		PD(4)	/* Use KB4 as PD(4) */
+#define PD_KB5		PD(5)	/* Use KB5 as PD(5) */
+#define PD_KB6		PD(6)	/* Use KB6 as PD(6) */
+#define PD_KB7		PD(7)	/* Use KB7 as PD(7) */
+
+/* 
+ * Port E
+ */
+#define PEDIR_ADDR	0xfffff420		/* Port E direction reg */
+#define PEDATA_ADDR	0xfffff421		/* Port E data register */
+#define PEPUEN_ADDR	0xfffff422		/* Port E Pull-Up enable reg */
+#define PESEL_ADDR	0xfffff423		/* Port E Select Register */
+
+#define PEDIR		BYTE_REF(PEDIR_ADDR)
+#define PEDATA		BYTE_REF(PEDATA_ADDR)
+#define PEPUEN		BYTE_REF(PEPUEN_ADDR)
+#define PESEL		BYTE_REF(PESEL_ADDR)
+
+#define PE(x)           (1 << (x))
+
+#define PE_CSA1		PE(1)	/* Use CSA1 as PE(1) */
+#define PE_CSA2		PE(2)	/* Use CSA2 as PE(2) */
+#define PE_CSA3		PE(3)	/* Use CSA3 as PE(3) */
+#define PE_CSB0		PE(4)	/* Use CSB0 as PE(4) */
+#define PE_CSB1		PE(5)	/* Use CSB1 as PE(5) */
+#define PE_CSB2		PE(6)	/* Use CSB2 as PE(6) */
+#define PE_CSB3		PE(7)	/* Use CSB3 as PE(7) */
+
+/* 
+ * Port F
+ */
+#define PFDIR_ADDR	0xfffff428		/* Port F direction reg */
+#define PFDATA_ADDR	0xfffff429		/* Port F data register */
+#define PFPUEN_ADDR	0xfffff42a		/* Port F Pull-Up enable reg */
+#define PFSEL_ADDR	0xfffff42b		/* Port F Select Register */
+
+#define PFDIR		BYTE_REF(PFDIR_ADDR)
+#define PFDATA		BYTE_REF(PFDATA_ADDR)
+#define PFPUEN		BYTE_REF(PFPUEN_ADDR)
+#define PFSEL		BYTE_REF(PFSEL_ADDR)
+
+#define PF(x)           (1 << (x))
+#define PF_A(x)		PF((x) - 24)	/* This is Port F specific only */
+
+#define PF_A24		PF(0)	/* Use A24 as PF(0) */
+#define PF_A25		PF(1)	/* Use A25 as PF(1) */
+#define PF_A26		PF(2)	/* Use A26 as PF(2) */
+#define PF_A27		PF(3)	/* Use A27 as PF(3) */
+#define PF_A28		PF(4)	/* Use A28 as PF(4) */
+#define PF_A29		PF(5)	/* Use A29 as PF(5) */
+#define PF_A30		PF(6)	/* Use A30 as PF(6) */
+#define PF_A31		PF(7)	/* Use A31 as PF(7) */
+
+/* 
+ * Port G
+ */
+#define PGDIR_ADDR	0xfffff430		/* Port G direction reg */
+#define PGDATA_ADDR	0xfffff431		/* Port G data register */
+#define PGPUEN_ADDR	0xfffff432		/* Port G Pull-Up enable reg */
+#define PGSEL_ADDR	0xfffff433		/* Port G Select Register */
+
+#define PGDIR		BYTE_REF(PGDIR_ADDR)
+#define PGDATA		BYTE_REF(PGDATA_ADDR)
+#define PGPUEN		BYTE_REF(PGPUEN_ADDR)
+#define PGSEL		BYTE_REF(PGSEL_ADDR)
+
+#define PG(x)           (1 << (x))
+
+#define PG_UART_TXD	PG(0)	/* Use UART_TXD as PG(0) */
+#define PG_UART_RXD	PG(1)	/* Use UART_RXD as PG(1) */
+#define PG_PWMOUT	PG(2)	/* Use PWMOUT   as PG(2) */
+#define PG_TOUT2	PG(3)   /* Use TOUT2    as PG(3) */
+#define PG_TIN2		PG(4)	/* Use TIN2     as PG(4) */
+#define PG_TOUT1	PG(5)   /* Use TOUT1    as PG(5) */
+#define PG_TIN1		PG(6)	/* Use TIN1     as PG(6) */
+#define PG_RTCOUT	PG(7)	/* Use RTCOUT   as PG(7) */
+
+/* 
+ * Port J
+ */
+#define PJDIR_ADDR	0xfffff438		/* Port J direction reg */
+#define PJDATA_ADDR	0xfffff439		/* Port J data register */
+#define PJSEL_ADDR	0xfffff43b		/* Port J Select Register */
+
+#define PJDIR		BYTE_REF(PJDIR_ADDR)
+#define PJDATA		BYTE_REF(PJDATA_ADDR)
+#define PJSEL		BYTE_REF(PJSEL_ADDR)
+
+#define PJ(x)           (1 << (x)) 
+
+#define PJ_CSD3		PJ(7)	/* Use CSD3 as PJ(7) */
+
+/* 
+ * Port K
+ */
+#define PKDIR_ADDR	0xfffff440		/* Port K direction reg */
+#define PKDATA_ADDR	0xfffff441		/* Port K data register */
+#define PKPUEN_ADDR	0xfffff442		/* Port K Pull-Up enable reg */
+#define PKSEL_ADDR	0xfffff443		/* Port K Select Register */
+
+#define PKDIR		BYTE_REF(PKDIR_ADDR)
+#define PKDATA		BYTE_REF(PKDATA_ADDR)
+#define PKPUEN		BYTE_REF(PKPUEN_ADDR)
+#define PKSEL		BYTE_REF(PKSEL_ADDR)
+
+#define PK(x)           (1 << (x))
+
+/* 
+ * Port M
+ */
+#define PMDIR_ADDR	0xfffff438		/* Port M direction reg */
+#define PMDATA_ADDR	0xfffff439		/* Port M data register */
+#define PMPUEN_ADDR	0xfffff43a		/* Port M Pull-Up enable reg */
+#define PMSEL_ADDR	0xfffff43b		/* Port M Select Register */
+
+#define PMDIR		BYTE_REF(PMDIR_ADDR)
+#define PMDATA		BYTE_REF(PMDATA_ADDR)
+#define PMPUEN		BYTE_REF(PMPUEN_ADDR)
+#define PMSEL		BYTE_REF(PMSEL_ADDR)
+
+#define PM(x)           (1 << (x))
+
+/**********
+ *
+ * 0xFFFFF5xx -- Pulse-Width Modulator (PWM)
+ *
+ **********/
+
+/*
+ * PWM Control Register 
+ */
+#define PWMC_ADDR	0xfffff500
+#define PWMC		WORD_REF(PWMC_ADDR)
+
+#define PWMC_CLKSEL_MASK	0x0007	/* Clock Selection */
+#define PWMC_CLKSEL_SHIFT	0
+#define PWMC_PWMEN		0x0010	/* Enable PWM */
+#define PMNC_POL		0x0020	/* PWM Output Bit Polarity */
+#define PWMC_PIN		0x0080	/* Current PWM output pin status */
+#define PWMC_LOAD		0x0100	/* Force a new period */
+#define PWMC_IRQEN		0x4000	/* Interrupt Request Enable */
+#define PWMC_CLKSRC		0x8000	/* Clock Source Select */
+
+/* 'EZ328-compatible definitions */
+#define PWMC_EN	PWMC_PWMEN
+
+/*
+ * PWM Period Register
+ */
+#define PWMP_ADDR	0xfffff502
+#define PWMP		WORD_REF(PWMP_ADDR)
+
+/* 
+ * PWM Width Register 
+ */
+#define PWMW_ADDR	0xfffff504
+#define PWMW		WORD_REF(PWMW_ADDR)
+
+/*
+ * PWM Counter Register
+ */
+#define PWMCNT_ADDR	0xfffff506
+#define PWMCNT		WORD_REF(PWMCNT_ADDR)
+
+/**********
+ *
+ * 0xFFFFF6xx -- General-Purpose Timers
+ *
+ **********/
+
+/* 
+ * Timer Unit 1 and 2 Control Registers
+ */
+#define TCTL1_ADDR	0xfffff600
+#define TCTL1		WORD_REF(TCTL1_ADDR)
+#define TCTL2_ADDR	0xfffff60c
+#define TCTL2		WORD_REF(TCTL2_ADDR)
+
+#define	TCTL_TEN		0x0001	/* Timer Enable  */
+#define TCTL_CLKSOURCE_MASK 	0x000e	/* Clock Source: */
+#define   TCTL_CLKSOURCE_STOP	   0x0000	/* Stop count (disabled)    */
+#define   TCTL_CLKSOURCE_SYSCLK	   0x0002	/* SYSCLK to prescaler      */
+#define   TCTL_CLKSOURCE_SYSCLK_16 0x0004	/* SYSCLK/16 to prescaler   */
+#define   TCTL_CLKSOURCE_TIN	   0x0006	/* TIN to prescaler         */
+#define   TCTL_CLKSOURCE_32KHZ	   0x0008	/* 32kHz clock to prescaler */
+#define TCTL_IRQEN		0x0010	/* IRQ Enable    */
+#define TCTL_OM			0x0020	/* Output Mode   */
+#define TCTL_CAP_MASK		0x00c0	/* Capture Edge: */
+#define	  TCTL_CAP_RE		0x0040		/* Capture on rizing edge   */
+#define   TCTL_CAP_FE		0x0080		/* Capture on falling edge  */
+#define TCTL_FRR		0x0010	/* Free-Run Mode */
+
+/* 'EZ328-compatible definitions */
+#define TCTL_ADDR	TCTL1_ADDR
+#define TCTL		TCTL1
+
+/*
+ * Timer Unit 1 and 2 Prescaler Registers
+ */
+#define TPRER1_ADDR	0xfffff602
+#define TPRER1		WORD_REF(TPRER1_ADDR)
+#define TPRER2_ADDR	0xfffff60e
+#define TPRER2		WORD_REF(TPRER2_ADDR)
+
+/* 'EZ328-compatible definitions */
+#define TPRER_ADDR	TPRER1_ADDR
+#define TPRER		TPRER1
+
+/*
+ * Timer Unit 1 and 2 Compare Registers
+ */
+#define TCMP1_ADDR	0xfffff604
+#define TCMP1		WORD_REF(TCMP1_ADDR)
+#define TCMP2_ADDR	0xfffff610
+#define TCMP2		WORD_REF(TCMP2_ADDR)
+
+/* 'EZ328-compatible definitions */
+#define TCMP_ADDR	TCMP1_ADDR
+#define TCMP		TCMP1
+
+/*
+ * Timer Unit 1 and 2 Capture Registers
+ */
+#define TCR1_ADDR	0xfffff606
+#define TCR1		WORD_REF(TCR1_ADDR)
+#define TCR2_ADDR	0xfffff612
+#define TCR2		WORD_REF(TCR2_ADDR)
+
+/* 'EZ328-compatible definitions */
+#define TCR_ADDR	TCR1_ADDR
+#define TCR		TCR1
+
+/*
+ * Timer Unit 1 and 2 Counter Registers
+ */
+#define TCN1_ADDR	0xfffff608
+#define TCN1		WORD_REF(TCN1_ADDR)
+#define TCN2_ADDR	0xfffff614
+#define TCN2		WORD_REF(TCN2_ADDR)
+
+/* 'EZ328-compatible definitions */
+#define TCN_ADDR	TCN1_ADDR
+#define TCN		TCN
+
+/*
+ * Timer Unit 1 and 2 Status Registers
+ */
+#define TSTAT1_ADDR	0xfffff60a
+#define TSTAT1		WORD_REF(TSTAT1_ADDR)
+#define TSTAT2_ADDR	0xfffff616
+#define TSTAT2		WORD_REF(TSTAT2_ADDR)
+
+#define TSTAT_COMP	0x0001		/* Compare Event occurred */
+#define TSTAT_CAPT	0x0001		/* Capture Event occurred */
+
+/* 'EZ328-compatible definitions */
+#define TSTAT_ADDR	TSTAT1_ADDR
+#define TSTAT		TSTAT1
+
+/*
+ * Watchdog Compare Register 
+ */
+#define WRR_ADDR	0xfffff61a
+#define WRR		WORD_REF(WRR_ADDR)
+
+/*
+ * Watchdog Counter Register 
+ */
+#define WCN_ADDR	0xfffff61c
+#define WCN		WORD_REF(WCN_ADDR)
+
+/*
+ * Watchdog Control and Status Register
+ */
+#define WCSR_ADDR	0xfffff618
+#define WCSR		WORD_REF(WCSR_ADDR)
+
+#define WCSR_WDEN	0x0001	/* Watchdog Enable */
+#define WCSR_FI		0x0002	/* Forced Interrupt (instead of SW reset)*/
+#define WCSR_WRST	0x0004	/* Watchdog Reset */
+
+/**********
+ *
+ * 0xFFFFF7xx -- Serial Periferial Interface Slave (SPIS)
+ *
+ **********/
+
+/*
+ * SPI Slave Register
+ */
+#define SPISR_ADDR	0xfffff700
+#define SPISR		WORD_REF(SPISR_ADDR)
+
+#define SPISR_DATA_ADDR	0xfffff701
+#define SPISR_DATA	BYTE_REF(SPISR_DATA_ADDR)
+
+#define SPISR_DATA_MASK	 0x00ff	/* Shifted data from the external device */
+#define SPISR_DATA_SHIFT 0
+#define SPISR_SPISEN	 0x0100	/* SPIS module enable */
+#define SPISR_POL	 0x0200	/* SPSCLK polarity control */
+#define SPISR_PHA	 0x0400	/* Phase relationship between SPSCLK & SPSRxD */
+#define SPISR_OVWR	 0x0800	/* Data buffer has been overwritten */
+#define SPISR_DATARDY	 0x1000	/* Data ready */
+#define SPISR_ENPOL	 0x2000	/* Enable Polarity */
+#define SPISR_IRQEN	 0x4000	/* SPIS IRQ Enable */
+#define SPISR_SPISIRQ	 0x8000	/* SPIS IRQ posted */
+
+/**********
+ *
+ * 0xFFFFF8xx -- Serial Periferial Interface Master (SPIM)
+ *
+ **********/
+
+/*
+ * SPIM Data Register
+ */
+#define SPIMDATA_ADDR	0xfffff800
+#define SPIMDATA	WORD_REF(SPIMDATA_ADDR)
+
+/*
+ * SPIM Control/Status Register
+ */
+#define SPIMCONT_ADDR	0xfffff802
+#define SPIMCONT	WORD_REF(SPIMCONT_ADDR)
+
+#define SPIMCONT_BIT_COUNT_MASK	 0x000f	/* Transfer Length in Bytes */
+#define SPIMCONT_BIT_COUNT_SHIFT 0
+#define SPIMCONT_POL		 0x0010	/* SPMCLK Signel Polarity */
+#define	SPIMCONT_PHA		 0x0020	/* Clock/Data phase relationship */
+#define SPIMCONT_IRQEN		 0x0040 /* IRQ Enable */
+#define SPIMCONT_SPIMIRQ	 0x0080	/* Interrupt Request */
+#define SPIMCONT_XCH		 0x0100	/* Exchange */
+#define SPIMCONT_RSPIMEN	 0x0200	/* Enable SPIM */
+#define SPIMCONT_DATA_RATE_MASK	 0xe000	/* SPIM Data Rate */
+#define SPIMCONT_DATA_RATE_SHIFT 13
+
+/* 'EZ328-compatible definitions */
+#define SPIMCONT_IRQ	SPIMCONT_SPIMIRQ
+#define SPIMCONT_ENABLE	SPIMCONT_SPIMEN
+/**********
+ *
+ * 0xFFFFF9xx -- UART
+ *
+ **********/
+
+/*
+ * UART Status/Control Register
+ */
+#define USTCNT_ADDR	0xfffff900
+#define USTCNT		WORD_REF(USTCNT_ADDR)
+
+#define USTCNT_TXAVAILEN	0x0001	/* Transmitter Available Int Enable */
+#define USTCNT_TXHALFEN		0x0002	/* Transmitter Half Empty Int Enable */
+#define USTCNT_TXEMPTYEN	0x0004	/* Transmitter Empty Int Enable */
+#define USTCNT_RXREADYEN	0x0008	/* Receiver Ready Interrupt Enable */
+#define USTCNT_RXHALFEN		0x0010	/* Receiver Half-Full Int Enable */
+#define USTCNT_RXFULLEN		0x0020	/* Receiver Full Interrupt Enable */
+#define USTCNT_CTSDELTAEN	0x0040	/* CTS Delta Interrupt Enable */
+#define USTCNT_GPIODELTAEN	0x0080	/* Old Data Interrupt Enable */
+#define USTCNT_8_7		0x0100	/* Eight or seven-bit transmission */
+#define USTCNT_STOP		0x0200	/* Stop bit transmission */
+#define USTCNT_ODD_EVEN		0x0400	/* Odd Parity */
+#define	USTCNT_PARITYEN		0x0800	/* Parity Enable */
+#define USTCNT_CLKMODE		0x1000	/* Clock Mode Select */
+#define	USTCNT_TXEN		0x2000	/* Transmitter Enable */
+#define USTCNT_RXEN		0x4000	/* Receiver Enable */
+#define USTCNT_UARTEN		0x8000	/* UART Enable */
+
+/* 'EZ328-compatible definitions */
+#define USTCNT_TXAE	USTCNT_TXAVAILEN 
+#define USTCNT_TXHE	USTCNT_TXHALFEN
+#define USTCNT_TXEE	USTCNT_TXEMPTYEN
+#define USTCNT_RXRE	USTCNT_RXREADYEN
+#define USTCNT_RXHE	USTCNT_RXHALFEN
+#define USTCNT_RXFE	USTCNT_RXFULLEN
+#define USTCNT_CTSD	USTCNT_CTSDELTAEN
+#define USTCNT_ODD	USTCNT_ODD_EVEN
+#define USTCNT_PEN	USTCNT_PARITYEN
+#define USTCNT_CLKM	USTCNT_CLKMODE
+#define USTCNT_UEN	USTCNT_UARTEN
+
+/*
+ * UART Baud Control Register
+ */
+#define UBAUD_ADDR	0xfffff902
+#define UBAUD		WORD_REF(UBAUD_ADDR)
+
+#define UBAUD_PRESCALER_MASK	0x003f	/* Actual divisor is 65 - PRESCALER */
+#define UBAUD_PRESCALER_SHIFT	0
+#define UBAUD_DIVIDE_MASK	0x0700	/* Baud Rate freq. divizor */
+#define UBAUD_DIVIDE_SHIFT	8
+#define UBAUD_BAUD_SRC		0x0800	/* Baud Rate Source */
+#define UBAUD_GPIOSRC		0x1000	/* GPIO source */
+#define UBAUD_GPIODIR		0x2000	/* GPIO Direction */
+#define UBAUD_GPIO		0x4000	/* Current GPIO pin status */
+#define UBAUD_GPIODELTA		0x8000	/* GPIO pin value changed */
+
+/*
+ * UART Receiver Register 
+ */
+#define URX_ADDR	0xfffff904
+#define URX		WORD_REF(URX_ADDR)
+
+#define URX_RXDATA_ADDR	0xfffff905
+#define URX_RXDATA	BYTE_REF(URX_RXDATA_ADDR)
+
+#define URX_RXDATA_MASK	 0x00ff	/* Received data */
+#define URX_RXDATA_SHIFT 0
+#define URX_PARITY_ERROR 0x0100	/* Parity Error */
+#define URX_BREAK	 0x0200	/* Break Detected */
+#define URX_FRAME_ERROR	 0x0400	/* Framing Error */
+#define URX_OVRUN	 0x0800	/* Serial Overrun */
+#define URX_DATA_READY	 0x2000	/* Data Ready (FIFO not empty) */
+#define URX_FIFO_HALF	 0x4000 /* FIFO is Half-Full */
+#define URX_FIFO_FULL	 0x8000	/* FIFO is Full */
+
+/*
+ * UART Transmitter Register 
+ */
+#define UTX_ADDR	0xfffff906
+#define UTX		WORD_REF(UTX_ADDR)
+
+#define UTX_TXDATA_ADDR	0xfffff907
+#define UTX_TXDATA	BYTE_REF(UTX_TXDATA_ADDR)
+
+#define UTX_TXDATA_MASK	 0x00ff	/* Data to be transmitted */
+#define UTX_TXDATA_SHIFT 0
+#define UTX_CTS_DELTA	 0x0100	/* CTS changed */
+#define UTX_CTS_STATUS	 0x0200	/* CTS State */
+#define	UTX_IGNORE_CTS	 0x0800	/* Ignore CTS */
+#define UTX_SEND_BREAK	 0x1000	/* Send a BREAK */
+#define UTX_TX_AVAIL	 0x2000	/* Transmit FIFO has a slot available */
+#define UTX_FIFO_HALF	 0x4000	/* Transmit FIFO is half empty */
+#define UTX_FIFO_EMPTY	 0x8000	/* Transmit FIFO is empty */
+
+/* 'EZ328-compatible definitions */
+#define UTX_CTS_STAT	UTX_CTS_STATUS
+#define UTX_NOCTS	UTX_IGNORE_CTS
+
+/*
+ * UART Miscellaneous Register 
+ */
+#define UMISC_ADDR	0xfffff908
+#define UMISC		WORD_REF(UMISC_ADDR)
+
+#define UMISC_TX_POL	 0x0004	/* Transmit Polarity */
+#define UMISC_RX_POL	 0x0008	/* Receive Polarity */
+#define UMISC_IRDA_LOOP	 0x0010	/* IrDA Loopback Enable */
+#define UMISC_IRDA_EN	 0x0020	/* Infra-Red Enable */
+#define UMISC_RTS	 0x0040	/* Set RTS status */
+#define UMISC_RTSCONT	 0x0080	/* Choose RTS control */
+#define UMISC_LOOP	 0x1000	/* Serial Loopback Enable */
+#define UMISC_FORCE_PERR 0x2000	/* Force Parity Error */
+#define UMISC_CLKSRC	 0x4000	/* Clock Source */
+
+
+/* generalization of uart control registers to support multiple ports: */
+typedef volatile struct {
+  volatile unsigned short int ustcnt;
+  volatile unsigned short int ubaud;
+  union {
+    volatile unsigned short int w;
+    struct {
+      volatile unsigned char status;
+      volatile unsigned char rxdata;
+    } b;
+  } urx;
+  union {
+    volatile unsigned short int w;
+    struct {
+      volatile unsigned char status;
+      volatile unsigned char txdata;
+    } b;
+  } utx;
+  volatile unsigned short int umisc;
+  volatile unsigned short int pad1;
+  volatile unsigned short int pad2;
+  volatile unsigned short int pad3;
+} __attribute__((packed)) m68328_uart;
+
+
+/**********
+ *
+ * 0xFFFFFAxx -- LCD Controller
+ *
+ **********/
+
+/*
+ * LCD Screen Starting Address Register 
+ */
+#define LSSA_ADDR	0xfffffa00
+#define LSSA		LONG_REF(LSSA_ADDR)
+
+#define LSSA_SSA_MASK	0xfffffffe	/* Bit 0 is reserved */
+
+/*
+ * LCD Virtual Page Width Register 
+ */
+#define LVPW_ADDR	0xfffffa05
+#define LVPW		BYTE_REF(LVPW_ADDR)
+
+/*
+ * LCD Screen Width Register (not compatible with 'EZ328 !!!)
+ */
+#define LXMAX_ADDR	0xfffffa08
+#define LXMAX		WORD_REF(LXMAX_ADDR)
+
+#define LXMAX_XM_MASK	0x02ff		/* Bits 0-3 are reserved */
+
+/*
+ * LCD Screen Height Register
+ */
+#define LYMAX_ADDR	0xfffffa0a
+#define LYMAX		WORD_REF(LYMAX_ADDR)
+
+#define LYMAX_YM_MASK	0x02ff		/* Bits 10-15 are reserved */
+
+/*
+ * LCD Cursor X Position Register
+ */
+#define LCXP_ADDR	0xfffffa18
+#define LCXP		WORD_REF(LCXP_ADDR)
+
+#define LCXP_CC_MASK	0xc000		/* Cursor Control */
+#define   LCXP_CC_TRAMSPARENT	0x0000
+#define   LCXP_CC_BLACK		0x4000
+#define   LCXP_CC_REVERSED	0x8000
+#define   LCXP_CC_WHITE		0xc000
+#define LCXP_CXP_MASK	0x02ff		/* Cursor X position */
+
+/*
+ * LCD Cursor Y Position Register
+ */
+#define LCYP_ADDR	0xfffffa1a
+#define LCYP		WORD_REF(LCYP_ADDR)
+
+#define LCYP_CYP_MASK	0x01ff		/* Cursor Y Position */
+
+/*
+ * LCD Cursor Width and Heigth Register
+ */
+#define LCWCH_ADDR	0xfffffa1c
+#define LCWCH		WORD_REF(LCWCH_ADDR)
+
+#define LCWCH_CH_MASK	0x001f		/* Cursor Height */
+#define LCWCH_CH_SHIFT	0
+#define LCWCH_CW_MASK	0x1f00		/* Cursor Width */
+#define LCWCH_CW_SHIFT	8
+
+/*
+ * LCD Blink Control Register
+ */
+#define LBLKC_ADDR	0xfffffa1f
+#define LBLKC		BYTE_REF(LBLKC_ADDR)
+
+#define LBLKC_BD_MASK	0x7f	/* Blink Divisor */
+#define LBLKC_BD_SHIFT	0
+#define LBLKC_BKEN	0x80	/* Blink Enabled */
+
+/*
+ * LCD Panel Interface Configuration Register 
+ */
+#define LPICF_ADDR	0xfffffa20
+#define LPICF		BYTE_REF(LPICF_ADDR)
+
+#define LPICF_GS_MASK	 0x01	 /* Gray-Scale Mode */
+#define	  LPICF_GS_BW	   0x00
+#define   LPICF_GS_GRAY_4  0x01
+#define LPICF_PBSIZ_MASK 0x06	/* Panel Bus Width */
+#define   LPICF_PBSIZ_1	   0x00
+#define   LPICF_PBSIZ_2    0x02
+#define   LPICF_PBSIZ_4    0x04
+
+/*
+ * LCD Polarity Configuration Register 
+ */
+#define LPOLCF_ADDR	0xfffffa21
+#define LPOLCF		BYTE_REF(LPOLCF_ADDR)
+
+#define LPOLCF_PIXPOL	0x01	/* Pixel Polarity */
+#define LPOLCF_LPPOL	0x02	/* Line Pulse Polarity */
+#define LPOLCF_FLMPOL	0x04	/* Frame Marker Polarity */
+#define LPOLCF_LCKPOL	0x08	/* LCD Shift Lock Polarity */
+
+/*
+ * LACD (LCD Alternate Crystal Direction) Rate Control Register
+ */
+#define LACDRC_ADDR	0xfffffa23
+#define LACDRC		BYTE_REF(LACDRC_ADDR)
+
+#define LACDRC_ACD_MASK	 0x0f	/* Alternate Crystal Direction Control */
+#define LACDRC_ACD_SHIFT 0
+
+/*
+ * LCD Pixel Clock Divider Register
+ */
+#define LPXCD_ADDR	0xfffffa25
+#define LPXCD		BYTE_REF(LPXCD_ADDR)
+
+#define	LPXCD_PCD_MASK	0x3f 	/* Pixel Clock Divider */
+#define LPXCD_PCD_SHIFT	0
+
+/*
+ * LCD Clocking Control Register
+ */
+#define LCKCON_ADDR	0xfffffa27
+#define LCKCON		BYTE_REF(LCKCON_ADDR)
+
+#define LCKCON_PCDS	 0x01	/* Pixel Clock Divider Source Select */
+#define LCKCON_DWIDTH	 0x02	/* Display Memory Width  */
+#define LCKCON_DWS_MASK	 0x3c	/* Display Wait-State */
+#define LCKCON_DWS_SHIFT 2
+#define LCKCON_DMA16	 0x40	/* DMA burst length */
+#define LCKCON_LCDON	 0x80	/* Enable LCD Controller */
+
+/* 'EZ328-compatible definitions */
+#define LCKCON_DW_MASK	LCKCON_DWS_MASK
+#define LCKCON_DW_SHIFT	LCKCON_DWS_SHIFT
+
+/*
+ * LCD Last Buffer Address Register
+ */
+#define LLBAR_ADDR	0xfffffa29
+#define LLBAR		BYTE_REF(LLBAR_ADDR)
+
+#define LLBAR_LBAR_MASK	 0x7f	/* Number of memory words to fill 1 line */
+#define LLBAR_LBAR_SHIFT 0
+
+/*
+ * LCD Octet Terminal Count Register 
+ */
+#define LOTCR_ADDR	0xfffffa2b
+#define LOTCR		BYTE_REF(LOTCR_ADDR)
+
+/*
+ * LCD Panning Offset Register
+ */
+#define LPOSR_ADDR	0xfffffa2d
+#define LPOSR		BYTE_REF(LPOSR_ADDR)
+
+#define LPOSR_BOS	0x08	/* Byte offset (for B/W mode only */
+#define LPOSR_POS_MASK	0x07	/* Pixel Offset Code */
+#define LPOSR_POS_SHIFT	0
+
+/*
+ * LCD Frame Rate Control Modulation Register
+ */
+#define LFRCM_ADDR	0xfffffa31
+#define LFRCM		BYTE_REF(LFRCM_ADDR)
+
+#define LFRCM_YMOD_MASK	 0x0f	/* Vertical Modulation */
+#define LFRCM_YMOD_SHIFT 0
+#define LFRCM_XMOD_MASK	 0xf0	/* Horizontal Modulation */
+#define LFRCM_XMOD_SHIFT 4
+
+/*
+ * LCD Gray Palette Mapping Register
+ */
+#define LGPMR_ADDR	0xfffffa32
+#define LGPMR		WORD_REF(LGPMR_ADDR)
+
+#define LGPMR_GLEVEL3_MASK	0x000f
+#define LGPMR_GLEVEL3_SHIFT	0 
+#define LGPMR_GLEVEL2_MASK	0x00f0
+#define LGPMR_GLEVEL2_SHIFT	4 
+#define LGPMR_GLEVEL0_MASK	0x0f00
+#define LGPMR_GLEVEL0_SHIFT	8 
+#define LGPMR_GLEVEL1_MASK	0xf000
+#define LGPMR_GLEVEL1_SHIFT	12
+
+/**********
+ *
+ * 0xFFFFFBxx -- Real-Time Clock (RTC)
+ *
+ **********/
+
+/*
+ * RTC Hours Minutes and Seconds Register
+ */
+#define RTCTIME_ADDR	0xfffffb00
+#define RTCTIME		LONG_REF(RTCTIME_ADDR)
+
+#define RTCTIME_SECONDS_MASK	0x0000003f	/* Seconds */
+#define RTCTIME_SECONDS_SHIFT	0
+#define RTCTIME_MINUTES_MASK	0x003f0000	/* Minutes */
+#define RTCTIME_MINUTES_SHIFT	16
+#define RTCTIME_HOURS_MASK	0x1f000000	/* Hours */
+#define RTCTIME_HOURS_SHIFT	24
+
+/*
+ *  RTC Alarm Register 
+ */
+#define RTCALRM_ADDR    0xfffffb04
+#define RTCALRM         LONG_REF(RTCALRM_ADDR)
+
+#define RTCALRM_SECONDS_MASK    0x0000003f      /* Seconds */
+#define RTCALRM_SECONDS_SHIFT   0
+#define RTCALRM_MINUTES_MASK    0x003f0000      /* Minutes */
+#define RTCALRM_MINUTES_SHIFT   16
+#define RTCALRM_HOURS_MASK      0x1f000000      /* Hours */
+#define RTCALRM_HOURS_SHIFT     24
+
+/*
+ * RTC Control Register
+ */
+#define RTCCTL_ADDR	0xfffffb0c
+#define RTCCTL		WORD_REF(RTCCTL_ADDR)
+
+#define RTCCTL_384	0x0020	/* Crystal Selection */
+#define RTCCTL_ENABLE	0x0080	/* RTC Enable */
+
+/* 'EZ328-compatible definitions */
+#define RTCCTL_XTL	RTCCTL_384
+#define RTCCTL_EN	RTCCTL_ENABLE
+
+/*
+ * RTC Interrupt Status Register 
+ */
+#define RTCISR_ADDR	0xfffffb0e
+#define RTCISR		WORD_REF(RTCISR_ADDR)
+
+#define RTCISR_SW	0x0001	/* Stopwatch timed out */
+#define RTCISR_MIN	0x0002	/* 1-minute interrupt has occurred */
+#define RTCISR_ALM	0x0004	/* Alarm interrupt has occurred */
+#define RTCISR_DAY	0x0008	/* 24-hour rollover interrupt has occurred */
+#define RTCISR_1HZ	0x0010	/* 1Hz interrupt has occurred */
+
+/*
+ * RTC Interrupt Enable Register
+ */
+#define RTCIENR_ADDR	0xfffffb10
+#define RTCIENR		WORD_REF(RTCIENR_ADDR)
+
+#define RTCIENR_SW	0x0001	/* Stopwatch interrupt enable */
+#define RTCIENR_MIN	0x0002	/* 1-minute interrupt enable */
+#define RTCIENR_ALM	0x0004	/* Alarm interrupt enable */
+#define RTCIENR_DAY	0x0008	/* 24-hour rollover interrupt enable */
+#define RTCIENR_1HZ	0x0010	/* 1Hz interrupt enable */
+
+/* 
+ * Stopwatch Minutes Register
+ */
+#define STPWCH_ADDR	0xfffffb12
+#define STPWCH		WORD_REF(STPWCH)
+
+#define STPWCH_CNT_MASK	 0x00ff	/* Stopwatch countdown value */
+#define SPTWCH_CNT_SHIFT 0
+
+#endif /* _MC68328_H_ */
diff --git a/arch/m68knommu/include/asm/MC68332.h b/arch/m68knommu/include/asm/MC68332.h
new file mode 100644
index 00000000000..6bb8f02685a
--- /dev/null
+++ b/arch/m68knommu/include/asm/MC68332.h
@@ -0,0 +1,152 @@
+
+/* include/asm-m68knommu/MC68332.h: '332 control registers
+ *
+ * Copyright (C) 1998  Kenneth Albanowski <kjahds@kjahds.com>,
+ *
+ */
+
+#ifndef _MC68332_H_
+#define _MC68332_H_
+
+#define BYTE_REF(addr) (*((volatile unsigned char*)addr))
+#define WORD_REF(addr) (*((volatile unsigned short*)addr))
+
+#define PORTE_ADDR	0xfffa11
+#define PORTE	BYTE_REF(PORTE_ADDR)
+#define DDRE_ADDR	0xfffa15
+#define DDRE	BYTE_REF(DDRE_ADDR)
+#define PEPAR_ADDR	0xfffa17
+#define PEPAR	BYTE_REF(PEPAR_ADDR)
+
+#define PORTF_ADDR	0xfffa19
+#define PORTF	BYTE_REF(PORTF_ADDR)
+#define DDRF_ADDR	0xfffa1d
+#define DDRF	BYTE_REF(DDRF_ADDR)
+#define PFPAR_ADDR	0xfffa1f
+#define PFPAR	BYTE_REF(PFPAR_ADDR)
+
+#define PORTQS_ADDR	0xfffc15
+#define PORTQS	BYTE_REF(PORTQS_ADDR)
+#define DDRQS_ADDR	0xfffc17
+#define DDRQS	BYTE_REF(DDRQS_ADDR)
+#define PQSPAR_ADDR	0xfffc16
+#define PQSPAR	BYTE_REF(PQSPAR_ADDR)
+
+#define CSPAR0_ADDR 0xFFFA44
+#define CSPAR0 WORD_REF(CSPAR0_ADDR)
+#define CSPAR1_ADDR 0xFFFA46
+#define CSPAR1 WORD_REF(CSPAR1_ADDR)
+#define CSARBT_ADDR 0xFFFA48
+#define CSARBT WORD_REF(CSARBT_ADDR)
+#define CSOPBT_ADDR 0xFFFA4A
+#define CSOPBT WORD_REF(CSOPBT_ADDR)
+#define CSBAR0_ADDR 0xFFFA4C
+#define CSBAR0 WORD_REF(CSBAR0_ADDR)
+#define CSOR0_ADDR 0xFFFA4E
+#define CSOR0 WORD_REF(CSOR0_ADDR)
+#define CSBAR1_ADDR 0xFFFA50
+#define CSBAR1 WORD_REF(CSBAR1_ADDR)
+#define CSOR1_ADDR 0xFFFA52
+#define CSOR1 WORD_REF(CSOR1_ADDR)
+#define CSBAR2_ADDR 0xFFFA54
+#define CSBAR2 WORD_REF(CSBAR2_ADDR)
+#define CSOR2_ADDR 0xFFFA56
+#define CSOR2 WORD_REF(CSOR2_ADDR)
+#define CSBAR3_ADDR 0xFFFA58
+#define CSBAR3 WORD_REF(CSBAR3_ADDR)
+#define CSOR3_ADDR 0xFFFA5A
+#define CSOR3 WORD_REF(CSOR3_ADDR)
+#define CSBAR4_ADDR 0xFFFA5C
+#define CSBAR4 WORD_REF(CSBAR4_ADDR)
+#define CSOR4_ADDR 0xFFFA5E
+#define CSOR4 WORD_REF(CSOR4_ADDR)
+#define CSBAR5_ADDR 0xFFFA60
+#define CSBAR5 WORD_REF(CSBAR5_ADDR)
+#define CSOR5_ADDR 0xFFFA62
+#define CSOR5 WORD_REF(CSOR5_ADDR)
+#define CSBAR6_ADDR 0xFFFA64
+#define CSBAR6 WORD_REF(CSBAR6_ADDR)
+#define CSOR6_ADDR 0xFFFA66
+#define CSOR6 WORD_REF(CSOR6_ADDR)
+#define CSBAR7_ADDR 0xFFFA68
+#define CSBAR7 WORD_REF(CSBAR7_ADDR)
+#define CSOR7_ADDR 0xFFFA6A
+#define CSOR7 WORD_REF(CSOR7_ADDR)
+#define CSBAR8_ADDR 0xFFFA6C
+#define CSBAR8 WORD_REF(CSBAR8_ADDR)
+#define CSOR8_ADDR 0xFFFA6E
+#define CSOR8 WORD_REF(CSOR8_ADDR)
+#define CSBAR9_ADDR 0xFFFA70
+#define CSBAR9 WORD_REF(CSBAR9_ADDR)
+#define CSOR9_ADDR 0xFFFA72
+#define CSOR9 WORD_REF(CSOR9_ADDR)
+#define CSBAR10_ADDR 0xFFFA74
+#define CSBAR10 WORD_REF(CSBAR10_ADDR)
+#define CSOR10_ADDR 0xFFFA76
+#define CSOR10 WORD_REF(CSOR10_ADDR)
+
+#define CSOR_MODE_ASYNC	0x0000
+#define CSOR_MODE_SYNC	0x8000
+#define CSOR_MODE_MASK	0x8000
+#define CSOR_BYTE_DISABLE	0x0000
+#define CSOR_BYTE_UPPER		0x4000
+#define CSOR_BYTE_LOWER		0x2000
+#define CSOR_BYTE_BOTH		0x6000
+#define CSOR_BYTE_MASK		0x6000
+#define CSOR_RW_RSVD		0x0000
+#define CSOR_RW_READ		0x0800
+#define CSOR_RW_WRITE		0x1000
+#define CSOR_RW_BOTH		0x1800
+#define CSOR_RW_MASK		0x1800
+#define CSOR_STROBE_DS		0x0400
+#define CSOR_STROBE_AS		0x0000
+#define CSOR_STROBE_MASK	0x0400
+#define CSOR_DSACK_WAIT(x)	(wait << 6)
+#define CSOR_DSACK_FTERM	(14 << 6)
+#define CSOR_DSACK_EXTERNAL	(15 << 6)
+#define CSOR_DSACK_MASK		0x03c0
+#define CSOR_SPACE_CPU		0x0000
+#define CSOR_SPACE_USER		0x0010
+#define CSOR_SPACE_SU		0x0020
+#define CSOR_SPACE_BOTH		0x0030
+#define CSOR_SPACE_MASK		0x0030
+#define CSOR_IPL_ALL		0x0000
+#define CSOR_IPL_PRIORITY(x)	(x << 1)
+#define CSOR_IPL_MASK		0x000e
+#define CSOR_AVEC_ON		0x0001
+#define CSOR_AVEC_OFF		0x0000
+#define CSOR_AVEC_MASK		0x0001
+
+#define CSBAR_ADDR(x)		((addr >> 11) << 3) 
+#define CSBAR_ADDR_MASK		0xfff8
+#define CSBAR_BLKSIZE_2K	0x0000
+#define CSBAR_BLKSIZE_8K	0x0001
+#define CSBAR_BLKSIZE_16K	0x0002
+#define CSBAR_BLKSIZE_64K	0x0003
+#define CSBAR_BLKSIZE_128K	0x0004
+#define CSBAR_BLKSIZE_256K	0x0005
+#define CSBAR_BLKSIZE_512K	0x0006
+#define CSBAR_BLKSIZE_1M	0x0007
+#define CSBAR_BLKSIZE_MASK	0x0007
+
+#define CSPAR_DISC	0
+#define CSPAR_ALT	1
+#define CSPAR_CS8	2
+#define CSPAR_CS16	3
+#define CSPAR_MASK	3
+
+#define CSPAR0_CSBOOT(x) (x << 0)
+#define CSPAR0_CS0(x)	(x << 2)
+#define CSPAR0_CS1(x)	(x << 4)
+#define CSPAR0_CS2(x)	(x << 6)
+#define CSPAR0_CS3(x)	(x << 8)
+#define CSPAR0_CS4(x)	(x << 10)
+#define CSPAR0_CS5(x)	(x << 12)
+
+#define CSPAR1_CS6(x)	(x << 0)
+#define CSPAR1_CS7(x)	(x << 2)
+#define CSPAR1_CS8(x)	(x << 4)
+#define CSPAR1_CS9(x)	(x << 6)
+#define CSPAR1_CS10(x)	(x << 8)
+
+#endif
diff --git a/arch/m68knommu/include/asm/MC68EZ328.h b/arch/m68knommu/include/asm/MC68EZ328.h
new file mode 100644
index 00000000000..69b7f9139e5
--- /dev/null
+++ b/arch/m68knommu/include/asm/MC68EZ328.h
@@ -0,0 +1,1253 @@
+
+/* include/asm-m68knommu/MC68EZ328.h: 'EZ328 control registers
+ *
+ * Copyright (C) 1999  Vladimir Gurevich <vgurevic@cisco.com>
+ *                     Bear & Hare Software, Inc.
+ *
+ * Based on include/asm-m68knommu/MC68332.h
+ * Copyright (C) 1998  Kenneth Albanowski <kjahds@kjahds.com>,
+ *                     The Silver Hammer Group, Ltd.
+ *
+ */
+
+#ifndef _MC68EZ328_H_
+#define _MC68EZ328_H_
+
+#define BYTE_REF(addr) (*((volatile unsigned char*)addr))
+#define WORD_REF(addr) (*((volatile unsigned short*)addr))
+#define LONG_REF(addr) (*((volatile unsigned long*)addr))
+
+#define PUT_FIELD(field, val) (((val) << field##_SHIFT) & field##_MASK)
+#define GET_FIELD(reg, field) (((reg) & field##_MASK) >> field##_SHIFT)
+
+/********** 
+ *
+ * 0xFFFFF0xx -- System Control
+ *
+ **********/
+ 
+/*
+ * System Control Register (SCR)
+ */
+#define SCR_ADDR	0xfffff000
+#define SCR		BYTE_REF(SCR_ADDR)
+
+#define SCR_WDTH8	0x01	/* 8-Bit Width Select */
+#define SCR_DMAP	0x04	/* Double Map */
+#define SCR_SO		0x08	/* Supervisor Only */
+#define SCR_BETEN	0x10	/* Bus-Error Time-Out Enable */
+#define SCR_PRV		0x20	/* Privilege Violation */
+#define SCR_WPV		0x40	/* Write Protect Violation */
+#define SCR_BETO	0x80	/* Bus-Error TimeOut */
+
+/*
+ * Silicon ID Register (Mask Revision Register (MRR) for '328 Compatibility)
+ */
+#define MRR_ADDR 0xfffff004
+#define MRR	 LONG_REF(MRR_ADDR)
+
+/********** 
+ *
+ * 0xFFFFF1xx -- Chip-Select logic
+ *
+ **********/
+ 
+/*
+ * Chip Select Group Base Registers 
+ */
+#define CSGBA_ADDR	0xfffff100
+#define CSGBB_ADDR	0xfffff102
+
+#define CSGBC_ADDR	0xfffff104
+#define CSGBD_ADDR	0xfffff106
+
+#define CSGBA		WORD_REF(CSGBA_ADDR)
+#define CSGBB		WORD_REF(CSGBB_ADDR)
+#define CSGBC		WORD_REF(CSGBC_ADDR)
+#define CSGBD		WORD_REF(CSGBD_ADDR)
+
+/*
+ * Chip Select Registers 
+ */
+#define CSA_ADDR	0xfffff110
+#define CSB_ADDR	0xfffff112
+#define CSC_ADDR	0xfffff114
+#define CSD_ADDR	0xfffff116
+
+#define CSA		WORD_REF(CSA_ADDR)
+#define CSB		WORD_REF(CSB_ADDR)
+#define CSC		WORD_REF(CSC_ADDR)
+#define CSD		WORD_REF(CSD_ADDR)
+
+#define CSA_EN		0x0001		/* Chip-Select Enable */
+#define CSA_SIZ_MASK	0x000e		/* Chip-Select Size */
+#define CSA_SIZ_SHIFT   1
+#define CSA_WS_MASK	0x0070		/* Wait State */
+#define CSA_WS_SHIFT    4
+#define CSA_BSW		0x0080		/* Data Bus Width */
+#define CSA_FLASH	0x0100		/* FLASH Memory Support */
+#define CSA_RO		0x8000		/* Read-Only */
+
+#define CSB_EN		0x0001		/* Chip-Select Enable */
+#define CSB_SIZ_MASK	0x000e		/* Chip-Select Size */
+#define CSB_SIZ_SHIFT   1
+#define CSB_WS_MASK	0x0070		/* Wait State */
+#define CSB_WS_SHIFT    4
+#define CSB_BSW		0x0080		/* Data Bus Width */
+#define CSB_FLASH	0x0100		/* FLASH Memory Support */
+#define CSB_UPSIZ_MASK	0x1800		/* Unprotected memory block size */
+#define CSB_UPSIZ_SHIFT 11
+#define CSB_ROP		0x2000		/* Readonly if protected */
+#define CSB_SOP		0x4000		/* Supervisor only if protected */
+#define CSB_RO		0x8000		/* Read-Only */
+
+#define CSC_EN		0x0001		/* Chip-Select Enable */
+#define CSC_SIZ_MASK	0x000e		/* Chip-Select Size */
+#define CSC_SIZ_SHIFT   1
+#define CSC_WS_MASK	0x0070		/* Wait State */
+#define CSC_WS_SHIFT    4
+#define CSC_BSW		0x0080		/* Data Bus Width */
+#define CSC_FLASH	0x0100		/* FLASH Memory Support */
+#define CSC_UPSIZ_MASK	0x1800		/* Unprotected memory block size */
+#define CSC_UPSIZ_SHIFT 11
+#define CSC_ROP		0x2000		/* Readonly if protected */
+#define CSC_SOP		0x4000		/* Supervisor only if protected */
+#define CSC_RO		0x8000		/* Read-Only */
+
+#define CSD_EN		0x0001		/* Chip-Select Enable */
+#define CSD_SIZ_MASK	0x000e		/* Chip-Select Size */
+#define CSD_SIZ_SHIFT   1
+#define CSD_WS_MASK	0x0070		/* Wait State */
+#define CSD_WS_SHIFT    4
+#define CSD_BSW		0x0080		/* Data Bus Width */
+#define CSD_FLASH	0x0100		/* FLASH Memory Support */
+#define CSD_DRAM	0x0200		/* Dram Selection */
+#define	CSD_COMB	0x0400		/* Combining */
+#define CSD_UPSIZ_MASK	0x1800		/* Unprotected memory block size */
+#define CSD_UPSIZ_SHIFT 11
+#define CSD_ROP		0x2000		/* Readonly if protected */
+#define CSD_SOP		0x4000		/* Supervisor only if protected */
+#define CSD_RO		0x8000		/* Read-Only */
+
+/*
+ * Emulation Chip-Select Register 
+ */
+#define EMUCS_ADDR	0xfffff118
+#define EMUCS		WORD_REF(EMUCS_ADDR)
+
+#define EMUCS_WS_MASK	0x0070
+#define EMUCS_WS_SHIFT	4
+
+/********** 
+ *
+ * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control
+ *
+ **********/
+
+/*
+ * PLL Control Register 
+ */
+#define PLLCR_ADDR	0xfffff200
+#define PLLCR		WORD_REF(PLLCR_ADDR)
+
+#define PLLCR_DISPLL	       0x0008	/* Disable PLL */
+#define PLLCR_CLKEN	       0x0010	/* Clock (CLKO pin) enable */
+#define PLLCR_PRESC	       0x0020	/* VCO prescaler */
+#define PLLCR_SYSCLK_SEL_MASK  0x0700	/* System Clock Selection */
+#define PLLCR_SYSCLK_SEL_SHIFT 8
+#define PLLCR_LCDCLK_SEL_MASK  0x3800	/* LCD Clock Selection */
+#define PLLCR_LCDCLK_SEL_SHIFT 11
+
+/* '328-compatible definitions */
+#define PLLCR_PIXCLK_SEL_MASK	PLLCR_LCDCLK_SEL_MASK
+#define PLLCR_PIXCLK_SEL_SHIFT	PLLCR_LCDCLK_SEL_SHIFT
+
+/*
+ * PLL Frequency Select Register
+ */
+#define PLLFSR_ADDR	0xfffff202
+#define PLLFSR		WORD_REF(PLLFSR_ADDR)
+
+#define PLLFSR_PC_MASK	0x00ff		/* P Count */
+#define PLLFSR_PC_SHIFT 0
+#define PLLFSR_QC_MASK	0x0f00		/* Q Count */
+#define PLLFSR_QC_SHIFT 8
+#define PLLFSR_PROT	0x4000		/* Protect P & Q */
+#define PLLFSR_CLK32	0x8000		/* Clock 32 (kHz) */
+
+/*
+ * Power Control Register
+ */
+#define PCTRL_ADDR	0xfffff207
+#define PCTRL		BYTE_REF(PCTRL_ADDR)
+
+#define PCTRL_WIDTH_MASK	0x1f	/* CPU Clock bursts width */
+#define PCTRL_WIDTH_SHIFT	0
+#define PCTRL_PCEN		0x80	/* Power Control Enable */
+
+/**********
+ *
+ * 0xFFFFF3xx -- Interrupt Controller
+ *
+ **********/
+
+/* 
+ * Interrupt Vector Register
+ */
+#define IVR_ADDR	0xfffff300
+#define IVR		BYTE_REF(IVR_ADDR)
+
+#define IVR_VECTOR_MASK 0xF8
+
+/*
+ * Interrupt control Register
+ */
+#define ICR_ADDR	0xfffff302
+#define ICR		WORD_REF(ICR_ADDR)
+
+#define ICR_POL5	0x0080	/* Polarity Control for IRQ5 */
+#define ICR_ET6		0x0100	/* Edge Trigger Select for IRQ6 */
+#define ICR_ET3		0x0200	/* Edge Trigger Select for IRQ3 */
+#define ICR_ET2		0x0400	/* Edge Trigger Select for IRQ2 */
+#define ICR_ET1		0x0800	/* Edge Trigger Select for IRQ1 */
+#define ICR_POL6	0x1000	/* Polarity Control for IRQ6 */
+#define ICR_POL3	0x2000	/* Polarity Control for IRQ3 */
+#define ICR_POL2	0x4000	/* Polarity Control for IRQ2 */
+#define ICR_POL1	0x8000	/* Polarity Control for IRQ1 */
+
+/*
+ * Interrupt Mask Register
+ */
+#define IMR_ADDR	0xfffff304
+#define IMR		LONG_REF(IMR_ADDR)
+
+/*
+ * Define the names for bit positions first. This is useful for 
+ * request_irq
+ */
+#define SPI_IRQ_NUM	0	/* SPI interrupt */
+#define TMR_IRQ_NUM	1	/* Timer interrupt */
+#define UART_IRQ_NUM	2	/* UART interrupt */	
+#define	WDT_IRQ_NUM	3	/* Watchdog Timer interrupt */
+#define RTC_IRQ_NUM	4	/* RTC interrupt */
+#define	KB_IRQ_NUM	6	/* Keyboard Interrupt */
+#define PWM_IRQ_NUM	7	/* Pulse-Width Modulator int. */
+#define	INT0_IRQ_NUM	8	/* External INT0 */
+#define	INT1_IRQ_NUM	9	/* External INT1 */
+#define	INT2_IRQ_NUM	10	/* External INT2 */
+#define	INT3_IRQ_NUM	11	/* External INT3 */
+#define IRQ1_IRQ_NUM	16	/* IRQ1 */
+#define IRQ2_IRQ_NUM	17	/* IRQ2 */
+#define IRQ3_IRQ_NUM	18	/* IRQ3 */
+#define IRQ6_IRQ_NUM	19	/* IRQ6 */
+#define IRQ5_IRQ_NUM	20	/* IRQ5 */
+#define SAM_IRQ_NUM	22	/* Sampling Timer for RTC */
+#define EMIQ_IRQ_NUM	23	/* Emulator Interrupt */
+
+/* '328-compatible definitions */
+#define SPIM_IRQ_NUM	SPI_IRQ_NUM
+#define TMR1_IRQ_NUM	TMR_IRQ_NUM
+
+/* 
+ * Here go the bitmasks themselves
+ */
+#define IMR_MSPI 	(1 << SPI_IRQ_NUM)	/* Mask SPI interrupt */
+#define	IMR_MTMR	(1 << TMR_IRQ_NUM)	/* Mask Timer interrupt */
+#define IMR_MUART	(1 << UART_IRQ_NUM)	/* Mask UART interrupt */	
+#define	IMR_MWDT	(1 << WDT_IRQ_NUM)	/* Mask Watchdog Timer interrupt */
+#define IMR_MRTC	(1 << RTC_IRQ_NUM)	/* Mask RTC interrupt */
+#define	IMR_MKB		(1 << KB_IRQ_NUM)	/* Mask Keyboard Interrupt */
+#define IMR_MPWM	(1 << PWM_IRQ_NUM)	/* Mask Pulse-Width Modulator int. */
+#define	IMR_MINT0	(1 << INT0_IRQ_NUM)	/* Mask External INT0 */
+#define	IMR_MINT1	(1 << INT1_IRQ_NUM)	/* Mask External INT1 */
+#define	IMR_MINT2	(1 << INT2_IRQ_NUM)	/* Mask External INT2 */
+#define	IMR_MINT3	(1 << INT3_IRQ_NUM)	/* Mask External INT3 */
+#define IMR_MIRQ1	(1 << IRQ1_IRQ_NUM)	/* Mask IRQ1 */
+#define IMR_MIRQ2	(1 << IRQ2_IRQ_NUM)	/* Mask IRQ2 */
+#define IMR_MIRQ3	(1 << IRQ3_IRQ_NUM)	/* Mask IRQ3 */
+#define IMR_MIRQ6	(1 << IRQ6_IRQ_NUM)	/* Mask IRQ6 */
+#define IMR_MIRQ5	(1 << IRQ5_IRQ_NUM)	/* Mask IRQ5 */
+#define IMR_MSAM	(1 << SAM_IRQ_NUM)	/* Mask Sampling Timer for RTC */
+#define IMR_MEMIQ	(1 << EMIQ_IRQ_NUM)	/* Mask Emulator Interrupt */
+
+/* '328-compatible definitions */
+#define IMR_MSPIM	IMR_MSPI
+#define IMR_MTMR1	IMR_MTMR
+
+/* 
+ * Interrupt Status Register 
+ */
+#define ISR_ADDR	0xfffff30c
+#define ISR		LONG_REF(ISR_ADDR)
+
+#define ISR_SPI 	(1 << SPI_IRQ_NUM)	/* SPI interrupt */
+#define	ISR_TMR		(1 << TMR_IRQ_NUM)	/* Timer interrupt */
+#define ISR_UART	(1 << UART_IRQ_NUM)	/* UART interrupt */	
+#define	ISR_WDT		(1 << WDT_IRQ_NUM)	/* Watchdog Timer interrupt */
+#define ISR_RTC		(1 << RTC_IRQ_NUM)	/* RTC interrupt */
+#define	ISR_KB		(1 << KB_IRQ_NUM)	/* Keyboard Interrupt */
+#define ISR_PWM		(1 << PWM_IRQ_NUM)	/* Pulse-Width Modulator interrupt */
+#define	ISR_INT0	(1 << INT0_IRQ_NUM)	/* External INT0 */
+#define	ISR_INT1	(1 << INT1_IRQ_NUM)	/* External INT1 */
+#define	ISR_INT2	(1 << INT2_IRQ_NUM)	/* External INT2 */
+#define	ISR_INT3	(1 << INT3_IRQ_NUM)	/* External INT3 */
+#define ISR_IRQ1	(1 << IRQ1_IRQ_NUM)	/* IRQ1 */
+#define ISR_IRQ2	(1 << IRQ2_IRQ_NUM)	/* IRQ2 */
+#define ISR_IRQ3	(1 << IRQ3_IRQ_NUM)	/* IRQ3 */
+#define ISR_IRQ6	(1 << IRQ6_IRQ_NUM)	/* IRQ6 */
+#define ISR_IRQ5	(1 << IRQ5_IRQ_NUM)	/* IRQ5 */
+#define ISR_SAM		(1 << SAM_IRQ_NUM)	/* Sampling Timer for RTC */
+#define ISR_EMIQ	(1 << EMIQ_IRQ_NUM)	/* Emulator Interrupt */
+
+/* '328-compatible definitions */
+#define ISR_SPIM	ISR_SPI
+#define ISR_TMR1	ISR_TMR
+
+/* 
+ * Interrupt Pending Register 
+ */
+#define IPR_ADDR	0xfffff30c
+#define IPR		LONG_REF(IPR_ADDR)
+
+#define IPR_SPI 	(1 << SPI_IRQ_NUM)	/* SPI interrupt */
+#define	IPR_TMR		(1 << TMR_IRQ_NUM)	/* Timer interrupt */
+#define IPR_UART	(1 << UART_IRQ_NUM)	/* UART interrupt */	
+#define	IPR_WDT		(1 << WDT_IRQ_NUM)	/* Watchdog Timer interrupt */
+#define IPR_RTC		(1 << RTC_IRQ_NUM)	/* RTC interrupt */
+#define	IPR_KB		(1 << KB_IRQ_NUM)	/* Keyboard Interrupt */
+#define IPR_PWM		(1 << PWM_IRQ_NUM)	/* Pulse-Width Modulator interrupt */
+#define	IPR_INT0	(1 << INT0_IRQ_NUM)	/* External INT0 */
+#define	IPR_INT1	(1 << INT1_IRQ_NUM)	/* External INT1 */
+#define	IPR_INT2	(1 << INT2_IRQ_NUM)	/* External INT2 */
+#define	IPR_INT3	(1 << INT3_IRQ_NUM)	/* External INT3 */
+#define IPR_IRQ1	(1 << IRQ1_IRQ_NUM)	/* IRQ1 */
+#define IPR_IRQ2	(1 << IRQ2_IRQ_NUM)	/* IRQ2 */
+#define IPR_IRQ3	(1 << IRQ3_IRQ_NUM)	/* IRQ3 */
+#define IPR_IRQ6	(1 << IRQ6_IRQ_NUM)	/* IRQ6 */
+#define IPR_IRQ5	(1 << IRQ5_IRQ_NUM)	/* IRQ5 */
+#define IPR_SAM		(1 << SAM_IRQ_NUM)	/* Sampling Timer for RTC */
+#define IPR_EMIQ	(1 << EMIQ_IRQ_NUM)	/* Emulator Interrupt */
+
+/* '328-compatible definitions */
+#define IPR_SPIM	IPR_SPI
+#define IPR_TMR1	IPR_TMR
+
+/**********
+ *
+ * 0xFFFFF4xx -- Parallel Ports
+ *
+ **********/
+
+/*
+ * Port A
+ */
+#define PADIR_ADDR	0xfffff400		/* Port A direction reg */
+#define PADATA_ADDR	0xfffff401		/* Port A data register */
+#define PAPUEN_ADDR	0xfffff402		/* Port A Pull-Up enable reg */
+
+#define PADIR		BYTE_REF(PADIR_ADDR)
+#define PADATA		BYTE_REF(PADATA_ADDR)
+#define PAPUEN		BYTE_REF(PAPUEN_ADDR)
+
+#define PA(x)		(1 << (x))
+
+/* 
+ * Port B
+ */
+#define PBDIR_ADDR	0xfffff408		/* Port B direction reg */
+#define PBDATA_ADDR	0xfffff409		/* Port B data register */
+#define PBPUEN_ADDR	0xfffff40a		/* Port B Pull-Up enable reg */
+#define PBSEL_ADDR	0xfffff40b		/* Port B Select Register */
+
+#define PBDIR		BYTE_REF(PBDIR_ADDR)
+#define PBDATA		BYTE_REF(PBDATA_ADDR)
+#define PBPUEN		BYTE_REF(PBPUEN_ADDR)
+#define PBSEL		BYTE_REF(PBSEL_ADDR)
+
+#define PB(x)		(1 << (x))
+
+#define PB_CSB0		0x01	/* Use CSB0      as PB[0] */
+#define PB_CSB1		0x02	/* Use CSB1      as PB[1] */
+#define PB_CSC0_RAS0	0x04    /* Use CSC0/RAS0 as PB[2] */	
+#define PB_CSC1_RAS1	0x08    /* Use CSC1/RAS1 as PB[3] */	
+#define PB_CSD0_CAS0	0x10    /* Use CSD0/CAS0 as PB[4] */	
+#define PB_CSD1_CAS1	0x20    /* Use CSD1/CAS1 as PB[5] */
+#define PB_TIN_TOUT	0x40	/* Use TIN/TOUT  as PB[6] */
+#define PB_PWMO		0x80	/* Use PWMO      as PB[7] */
+
+/* 
+ * Port C
+ */
+#define PCDIR_ADDR	0xfffff410		/* Port C direction reg */
+#define PCDATA_ADDR	0xfffff411		/* Port C data register */
+#define PCPDEN_ADDR	0xfffff412		/* Port C Pull-Down enb. reg */
+#define PCSEL_ADDR	0xfffff413		/* Port C Select Register */
+
+#define PCDIR		BYTE_REF(PCDIR_ADDR)
+#define PCDATA		BYTE_REF(PCDATA_ADDR)
+#define PCPDEN		BYTE_REF(PCPDEN_ADDR)
+#define PCSEL		BYTE_REF(PCSEL_ADDR)
+
+#define PC(x)		(1 << (x))
+
+#define PC_LD0		0x01	/* Use LD0  as PC[0] */
+#define PC_LD1		0x02	/* Use LD1  as PC[1] */
+#define PC_LD2		0x04	/* Use LD2  as PC[2] */
+#define PC_LD3		0x08	/* Use LD3  as PC[3] */
+#define PC_LFLM		0x10	/* Use LFLM as PC[4] */
+#define PC_LLP 		0x20	/* Use LLP  as PC[5] */
+#define PC_LCLK		0x40	/* Use LCLK as PC[6] */
+#define PC_LACD		0x80	/* Use LACD as PC[7] */
+
+/* 
+ * Port D
+ */
+#define PDDIR_ADDR	0xfffff418		/* Port D direction reg */
+#define PDDATA_ADDR	0xfffff419		/* Port D data register */
+#define PDPUEN_ADDR	0xfffff41a		/* Port D Pull-Up enable reg */
+#define PDSEL_ADDR	0xfffff41b		/* Port D Select Register */
+#define PDPOL_ADDR	0xfffff41c		/* Port D Polarity Register */
+#define PDIRQEN_ADDR	0xfffff41d		/* Port D IRQ enable register */
+#define PDKBEN_ADDR	0xfffff41e		/* Port D Keyboard Enable reg */
+#define	PDIQEG_ADDR	0xfffff41f		/* Port D IRQ Edge Register */
+
+#define PDDIR		BYTE_REF(PDDIR_ADDR)
+#define PDDATA		BYTE_REF(PDDATA_ADDR)
+#define PDPUEN		BYTE_REF(PDPUEN_ADDR)
+#define PDSEL		BYTE_REF(PDSEL_ADDR)
+#define	PDPOL		BYTE_REF(PDPOL_ADDR)
+#define PDIRQEN		BYTE_REF(PDIRQEN_ADDR)
+#define PDKBEN		BYTE_REF(PDKBEN_ADDR)
+#define PDIQEG		BYTE_REF(PDIQEG_ADDR)
+
+#define PD(x)		(1 << (x))
+
+#define PD_INT0		0x01	/* Use INT0 as PD[0] */
+#define PD_INT1		0x02	/* Use INT1 as PD[1] */
+#define PD_INT2		0x04	/* Use INT2 as PD[2] */
+#define PD_INT3		0x08	/* Use INT3 as PD[3] */
+#define PD_IRQ1		0x10	/* Use IRQ1 as PD[4] */
+#define PD_IRQ2		0x20	/* Use IRQ2 as PD[5] */
+#define PD_IRQ3		0x40	/* Use IRQ3 as PD[6] */
+#define PD_IRQ6		0x80	/* Use IRQ6 as PD[7] */
+
+/* 
+ * Port E
+ */
+#define PEDIR_ADDR	0xfffff420		/* Port E direction reg */
+#define PEDATA_ADDR	0xfffff421		/* Port E data register */
+#define PEPUEN_ADDR	0xfffff422		/* Port E Pull-Up enable reg */
+#define PESEL_ADDR	0xfffff423		/* Port E Select Register */
+
+#define PEDIR		BYTE_REF(PEDIR_ADDR)
+#define PEDATA		BYTE_REF(PEDATA_ADDR)
+#define PEPUEN		BYTE_REF(PEPUEN_ADDR)
+#define PESEL		BYTE_REF(PESEL_ADDR)
+
+#define PE(x)		(1 << (x))
+
+#define PE_SPMTXD	0x01	/* Use SPMTXD as PE[0] */
+#define PE_SPMRXD	0x02	/* Use SPMRXD as PE[1] */
+#define PE_SPMCLK	0x04	/* Use SPMCLK as PE[2] */
+#define PE_DWE		0x08	/* Use DWE    as PE[3] */
+#define PE_RXD		0x10	/* Use RXD    as PE[4] */
+#define PE_TXD		0x20	/* Use TXD    as PE[5] */
+#define PE_RTS		0x40	/* Use RTS    as PE[6] */
+#define PE_CTS		0x80	/* Use CTS    as PE[7] */
+
+/* 
+ * Port F
+ */
+#define PFDIR_ADDR	0xfffff428		/* Port F direction reg */
+#define PFDATA_ADDR	0xfffff429		/* Port F data register */
+#define PFPUEN_ADDR	0xfffff42a		/* Port F Pull-Up enable reg */
+#define PFSEL_ADDR	0xfffff42b		/* Port F Select Register */
+
+#define PFDIR		BYTE_REF(PFDIR_ADDR)
+#define PFDATA		BYTE_REF(PFDATA_ADDR)
+#define PFPUEN		BYTE_REF(PFPUEN_ADDR)
+#define PFSEL		BYTE_REF(PFSEL_ADDR)
+
+#define PF(x)		(1 << (x))
+
+#define PF_LCONTRAST	0x01	/* Use LCONTRAST as PF[0] */
+#define PF_IRQ5         0x02    /* Use IRQ5      as PF[1] */
+#define PF_CLKO         0x04    /* Use CLKO      as PF[2] */
+#define PF_A20          0x08    /* Use A20       as PF[3] */
+#define PF_A21          0x10    /* Use A21       as PF[4] */
+#define PF_A22          0x20    /* Use A22       as PF[5] */
+#define PF_A23          0x40    /* Use A23       as PF[6] */
+#define PF_CSA1		0x80    /* Use CSA1      as PF[7] */
+
+/* 
+ * Port G
+ */
+#define PGDIR_ADDR	0xfffff430		/* Port G direction reg */
+#define PGDATA_ADDR	0xfffff431		/* Port G data register */
+#define PGPUEN_ADDR	0xfffff432		/* Port G Pull-Up enable reg */
+#define PGSEL_ADDR	0xfffff433		/* Port G Select Register */
+
+#define PGDIR		BYTE_REF(PGDIR_ADDR)
+#define PGDATA		BYTE_REF(PGDATA_ADDR)
+#define PGPUEN		BYTE_REF(PGPUEN_ADDR)
+#define PGSEL		BYTE_REF(PGSEL_ADDR)
+
+#define PG(x)		(1 << (x))
+
+#define PG_BUSW_DTACK	0x01	/* Use BUSW/DTACK as PG[0] */
+#define PG_A0		0x02	/* Use A0         as PG[1] */
+#define PG_EMUIRQ	0x04	/* Use EMUIRQ     as PG[2] */
+#define PG_HIZ_P_D	0x08	/* Use HIZ/P/D    as PG[3] */
+#define PG_EMUCS        0x10	/* Use EMUCS      as PG[4] */
+#define PG_EMUBRK	0x20	/* Use EMUBRK     as PG[5] */
+
+/**********
+ *
+ * 0xFFFFF5xx -- Pulse-Width Modulator (PWM)
+ *
+ **********/
+
+/*
+ * PWM Control Register 
+ */
+#define PWMC_ADDR	0xfffff500
+#define PWMC		WORD_REF(PWMC_ADDR)
+
+#define PWMC_CLKSEL_MASK	0x0003	/* Clock Selection */
+#define PWMC_CLKSEL_SHIFT	0
+#define PWMC_REPEAT_MASK	0x000c	/* Sample Repeats */
+#define PWMC_REPEAT_SHIFT	2
+#define PWMC_EN			0x0010	/* Enable PWM */
+#define PMNC_FIFOAV		0x0020	/* FIFO Available */
+#define PWMC_IRQEN		0x0040	/* Interrupt Request Enable */
+#define PWMC_IRQ		0x0080	/* Interrupt Request (FIFO empty) */
+#define PWMC_PRESCALER_MASK	0x7f00	/* Incoming Clock prescaler */
+#define PWMC_PRESCALER_SHIFT	8
+#define PWMC_CLKSRC		0x8000	/* Clock Source Select */
+
+/* '328-compatible definitions */
+#define PWMC_PWMEN	PWMC_EN
+
+/*
+ * PWM Sample Register 
+ */
+#define PWMS_ADDR	0xfffff502
+#define PWMS		WORD_REF(PWMS_ADDR)
+
+/*
+ * PWM Period Register
+ */
+#define PWMP_ADDR	0xfffff504
+#define PWMP		BYTE_REF(PWMP_ADDR)
+
+/*
+ * PWM Counter Register
+ */
+#define PWMCNT_ADDR	0xfffff505
+#define PWMCNT		BYTE_REF(PWMCNT_ADDR)
+
+/**********
+ *
+ * 0xFFFFF6xx -- General-Purpose Timer
+ *
+ **********/
+
+/* 
+ * Timer Control register
+ */
+#define TCTL_ADDR	0xfffff600
+#define TCTL		WORD_REF(TCTL_ADDR)
+
+#define	TCTL_TEN		0x0001	/* Timer Enable  */
+#define TCTL_CLKSOURCE_MASK 	0x000e	/* Clock Source: */
+#define   TCTL_CLKSOURCE_STOP	   0x0000	/* Stop count (disabled)    */
+#define   TCTL_CLKSOURCE_SYSCLK	   0x0002	/* SYSCLK to prescaler      */
+#define   TCTL_CLKSOURCE_SYSCLK_16 0x0004	/* SYSCLK/16 to prescaler   */
+#define   TCTL_CLKSOURCE_TIN	   0x0006	/* TIN to prescaler         */
+#define   TCTL_CLKSOURCE_32KHZ	   0x0008	/* 32kHz clock to prescaler */
+#define TCTL_IRQEN		0x0010	/* IRQ Enable    */
+#define TCTL_OM			0x0020	/* Output Mode   */
+#define TCTL_CAP_MASK		0x00c0	/* Capture Edge: */
+#define	  TCTL_CAP_RE		0x0040		/* Capture on rizing edge   */
+#define   TCTL_CAP_FE		0x0080		/* Capture on falling edge  */
+#define TCTL_FRR		0x0010	/* Free-Run Mode */
+
+/* '328-compatible definitions */
+#define TCTL1_ADDR	TCTL_ADDR
+#define TCTL1		TCTL
+
+/*
+ * Timer Prescaler Register
+ */
+#define TPRER_ADDR	0xfffff602
+#define TPRER		WORD_REF(TPRER_ADDR)
+
+/* '328-compatible definitions */
+#define TPRER1_ADDR	TPRER_ADDR
+#define TPRER1		TPRER
+
+/*
+ * Timer Compare Register
+ */
+#define TCMP_ADDR	0xfffff604
+#define TCMP		WORD_REF(TCMP_ADDR)
+
+/* '328-compatible definitions */
+#define TCMP1_ADDR	TCMP_ADDR
+#define TCMP1		TCMP
+
+/*
+ * Timer Capture register
+ */
+#define TCR_ADDR	0xfffff606
+#define TCR		WORD_REF(TCR_ADDR)
+
+/* '328-compatible definitions */
+#define TCR1_ADDR	TCR_ADDR
+#define TCR1		TCR
+
+/*
+ * Timer Counter Register
+ */
+#define TCN_ADDR	0xfffff608
+#define TCN		WORD_REF(TCN_ADDR)
+
+/* '328-compatible definitions */
+#define TCN1_ADDR	TCN_ADDR
+#define TCN1		TCN
+
+/*
+ * Timer Status Register
+ */
+#define TSTAT_ADDR	0xfffff60a
+#define TSTAT		WORD_REF(TSTAT_ADDR)
+
+#define TSTAT_COMP	0x0001		/* Compare Event occurred */
+#define TSTAT_CAPT	0x0001		/* Capture Event occurred */
+
+/* '328-compatible definitions */
+#define TSTAT1_ADDR	TSTAT_ADDR
+#define TSTAT1		TSTAT
+
+/**********
+ *
+ * 0xFFFFF8xx -- Serial Periferial Interface Master (SPIM)
+ *
+ **********/
+
+/*
+ * SPIM Data Register
+ */
+#define SPIMDATA_ADDR	0xfffff800
+#define SPIMDATA	WORD_REF(SPIMDATA_ADDR)
+
+/*
+ * SPIM Control/Status Register
+ */
+#define SPIMCONT_ADDR	0xfffff802
+#define SPIMCONT	WORD_REF(SPIMCONT_ADDR)
+
+#define SPIMCONT_BIT_COUNT_MASK	 0x000f	/* Transfer Length in Bytes */
+#define SPIMCONT_BIT_COUNT_SHIFT 0
+#define SPIMCONT_POL		 0x0010	/* SPMCLK Signel Polarity */
+#define	SPIMCONT_PHA		 0x0020	/* Clock/Data phase relationship */
+#define SPIMCONT_IRQEN		 0x0040 /* IRQ Enable */
+#define SPIMCONT_IRQ		 0x0080	/* Interrupt Request */
+#define SPIMCONT_XCH		 0x0100	/* Exchange */
+#define SPIMCONT_ENABLE		 0x0200	/* Enable SPIM */
+#define SPIMCONT_DATA_RATE_MASK	 0xe000	/* SPIM Data Rate */
+#define SPIMCONT_DATA_RATE_SHIFT 13
+
+/* '328-compatible definitions */
+#define SPIMCONT_SPIMIRQ	SPIMCONT_IRQ
+#define SPIMCONT_SPIMEN		SPIMCONT_ENABLE
+
+/**********
+ *
+ * 0xFFFFF9xx -- UART
+ *
+ **********/
+
+/*
+ * UART Status/Control Register
+ */
+#define USTCNT_ADDR	0xfffff900
+#define USTCNT		WORD_REF(USTCNT_ADDR)
+
+#define USTCNT_TXAE	0x0001	/* Transmitter Available Interrupt Enable */
+#define USTCNT_TXHE	0x0002	/* Transmitter Half Empty Enable */
+#define USTCNT_TXEE	0x0004	/* Transmitter Empty Interrupt Enable */
+#define USTCNT_RXRE	0x0008	/* Receiver Ready Interrupt Enable */
+#define USTCNT_RXHE	0x0010	/* Receiver Half-Full Interrupt Enable */
+#define USTCNT_RXFE	0x0020	/* Receiver Full Interrupt Enable */
+#define USTCNT_CTSD	0x0040	/* CTS Delta Interrupt Enable */
+#define USTCNT_ODEN	0x0080	/* Old Data Interrupt Enable */
+#define USTCNT_8_7	0x0100	/* Eight or seven-bit transmission */
+#define USTCNT_STOP	0x0200	/* Stop bit transmission */
+#define USTCNT_ODD	0x0400	/* Odd Parity */
+#define	USTCNT_PEN	0x0800	/* Parity Enable */
+#define USTCNT_CLKM	0x1000	/* Clock Mode Select */
+#define	USTCNT_TXEN	0x2000	/* Transmitter Enable */
+#define USTCNT_RXEN	0x4000	/* Receiver Enable */
+#define USTCNT_UEN	0x8000	/* UART Enable */
+
+/* '328-compatible definitions */
+#define USTCNT_TXAVAILEN	USTCNT_TXAE
+#define USTCNT_TXHALFEN		USTCNT_TXHE
+#define USTCNT_TXEMPTYEN	USTCNT_TXEE
+#define USTCNT_RXREADYEN	USTCNT_RXRE
+#define USTCNT_RXHALFEN		USTCNT_RXHE
+#define USTCNT_RXFULLEN		USTCNT_RXFE
+#define USTCNT_CTSDELTAEN	USTCNT_CTSD
+#define USTCNT_ODD_EVEN		USTCNT_ODD
+#define USTCNT_PARITYEN		USTCNT_PEN
+#define USTCNT_CLKMODE		USTCNT_CLKM
+#define USTCNT_UARTEN		USTCNT_UEN
+
+/*
+ * UART Baud Control Register
+ */
+#define UBAUD_ADDR	0xfffff902
+#define UBAUD		WORD_REF(UBAUD_ADDR)
+
+#define UBAUD_PRESCALER_MASK	0x003f	/* Actual divisor is 65 - PRESCALER */
+#define UBAUD_PRESCALER_SHIFT	0
+#define UBAUD_DIVIDE_MASK	0x0700	/* Baud Rate freq. divizor */
+#define UBAUD_DIVIDE_SHIFT	8
+#define UBAUD_BAUD_SRC		0x0800	/* Baud Rate Source */
+#define UBAUD_UCLKDIR		0x2000	/* UCLK Direction */
+
+/*
+ * UART Receiver Register 
+ */
+#define URX_ADDR	0xfffff904
+#define URX		WORD_REF(URX_ADDR)
+
+#define URX_RXDATA_ADDR	0xfffff905
+#define URX_RXDATA	BYTE_REF(URX_RXDATA_ADDR)
+
+#define URX_RXDATA_MASK	 0x00ff	/* Received data */
+#define URX_RXDATA_SHIFT 0
+#define URX_PARITY_ERROR 0x0100	/* Parity Error */
+#define URX_BREAK	 0x0200	/* Break Detected */
+#define URX_FRAME_ERROR	 0x0400	/* Framing Error */
+#define URX_OVRUN	 0x0800	/* Serial Overrun */
+#define URX_OLD_DATA	 0x1000	/* Old data in FIFO */
+#define URX_DATA_READY	 0x2000	/* Data Ready (FIFO not empty) */
+#define URX_FIFO_HALF	 0x4000 /* FIFO is Half-Full */
+#define URX_FIFO_FULL	 0x8000	/* FIFO is Full */
+
+/*
+ * UART Transmitter Register 
+ */
+#define UTX_ADDR	0xfffff906
+#define UTX		WORD_REF(UTX_ADDR)
+
+#define UTX_TXDATA_ADDR	0xfffff907
+#define UTX_TXDATA	BYTE_REF(UTX_TXDATA_ADDR)
+
+#define UTX_TXDATA_MASK	 0x00ff	/* Data to be transmitted */
+#define UTX_TXDATA_SHIFT 0
+#define UTX_CTS_DELTA	 0x0100	/* CTS changed */
+#define UTX_CTS_STAT	 0x0200	/* CTS State */
+#define	UTX_BUSY	 0x0400	/* FIFO is busy, sending a character */
+#define	UTX_NOCTS	 0x0800	/* Ignore CTS */
+#define UTX_SEND_BREAK	 0x1000	/* Send a BREAK */
+#define UTX_TX_AVAIL	 0x2000	/* Transmit FIFO has a slot available */
+#define UTX_FIFO_HALF	 0x4000	/* Transmit FIFO is half empty */
+#define UTX_FIFO_EMPTY	 0x8000	/* Transmit FIFO is empty */
+
+/* '328-compatible definitions */
+#define UTX_CTS_STATUS	UTX_CTS_STAT
+#define UTX_IGNORE_CTS	UTX_NOCTS
+
+/*
+ * UART Miscellaneous Register 
+ */
+#define UMISC_ADDR	0xfffff908
+#define UMISC		WORD_REF(UMISC_ADDR)
+
+#define UMISC_TX_POL	 0x0004	/* Transmit Polarity */
+#define UMISC_RX_POL	 0x0008	/* Receive Polarity */
+#define UMISC_IRDA_LOOP	 0x0010	/* IrDA Loopback Enable */
+#define UMISC_IRDA_EN	 0x0020	/* Infra-Red Enable */
+#define UMISC_RTS	 0x0040	/* Set RTS status */
+#define UMISC_RTSCONT	 0x0080	/* Choose RTS control */
+#define UMISC_IR_TEST	 0x0400	/* IRDA Test Enable */
+#define UMISC_BAUD_RESET 0x0800	/* Reset Baud Rate Generation Counters */
+#define UMISC_LOOP	 0x1000	/* Serial Loopback Enable */
+#define UMISC_FORCE_PERR 0x2000	/* Force Parity Error */
+#define UMISC_CLKSRC	 0x4000	/* Clock Source */
+#define UMISC_BAUD_TEST	 0x8000	/* Enable Baud Test Mode */
+
+/* 
+ * UART Non-integer Prescaler Register
+ */
+#define NIPR_ADDR	0xfffff90a
+#define NIPR		WORD_REF(NIPR_ADDR)
+
+#define NIPR_STEP_VALUE_MASK	0x00ff	/* NI prescaler step value */
+#define NIPR_STEP_VALUE_SHIFT	0
+#define NIPR_SELECT_MASK	0x0700	/* Tap Selection */
+#define NIPR_SELECT_SHIFT	8
+#define NIPR_PRE_SEL		0x8000	/* Non-integer prescaler select */
+
+
+/* generalization of uart control registers to support multiple ports: */
+typedef volatile struct {
+  volatile unsigned short int ustcnt;
+  volatile unsigned short int ubaud;
+  union {
+    volatile unsigned short int w;
+    struct {
+      volatile unsigned char status;
+      volatile unsigned char rxdata;
+    } b;
+  } urx;
+  union {
+    volatile unsigned short int w;
+    struct {
+      volatile unsigned char status;
+      volatile unsigned char txdata;
+    } b;
+  } utx;
+  volatile unsigned short int umisc;
+  volatile unsigned short int nipr;
+  volatile unsigned short int pad1;
+  volatile unsigned short int pad2;
+} __attribute__((packed)) m68328_uart;
+
+
+/**********
+ *
+ * 0xFFFFFAxx -- LCD Controller
+ *
+ **********/
+
+/*
+ * LCD Screen Starting Address Register 
+ */
+#define LSSA_ADDR	0xfffffa00
+#define LSSA		LONG_REF(LSSA_ADDR)
+
+#define LSSA_SSA_MASK	0x1ffffffe	/* Bits 0 and 29-31 are reserved */
+
+/*
+ * LCD Virtual Page Width Register 
+ */
+#define LVPW_ADDR	0xfffffa05
+#define LVPW		BYTE_REF(LVPW_ADDR)
+
+/*
+ * LCD Screen Width Register (not compatible with '328 !!!) 
+ */
+#define LXMAX_ADDR	0xfffffa08
+#define LXMAX		WORD_REF(LXMAX_ADDR)
+
+#define LXMAX_XM_MASK	0x02f0		/* Bits 0-3 and 10-15 are reserved */
+
+/*
+ * LCD Screen Height Register
+ */
+#define LYMAX_ADDR	0xfffffa0a
+#define LYMAX		WORD_REF(LYMAX_ADDR)
+
+#define LYMAX_YM_MASK	0x01ff		/* Bits 9-15 are reserved */
+
+/*
+ * LCD Cursor X Position Register
+ */
+#define LCXP_ADDR	0xfffffa18
+#define LCXP		WORD_REF(LCXP_ADDR)
+
+#define LCXP_CC_MASK	0xc000		/* Cursor Control */
+#define   LCXP_CC_TRAMSPARENT	0x0000
+#define   LCXP_CC_BLACK		0x4000
+#define   LCXP_CC_REVERSED	0x8000
+#define   LCXP_CC_WHITE		0xc000
+#define LCXP_CXP_MASK	0x02ff		/* Cursor X position */
+
+/*
+ * LCD Cursor Y Position Register
+ */
+#define LCYP_ADDR	0xfffffa1a
+#define LCYP		WORD_REF(LCYP_ADDR)
+
+#define LCYP_CYP_MASK	0x01ff		/* Cursor Y Position */
+
+/*
+ * LCD Cursor Width and Heigth Register
+ */
+#define LCWCH_ADDR	0xfffffa1c
+#define LCWCH		WORD_REF(LCWCH_ADDR)
+
+#define LCWCH_CH_MASK	0x001f		/* Cursor Height */
+#define LCWCH_CH_SHIFT	0
+#define LCWCH_CW_MASK	0x1f00		/* Cursor Width */
+#define LCWCH_CW_SHIFT	8
+
+/*
+ * LCD Blink Control Register
+ */
+#define LBLKC_ADDR	0xfffffa1f
+#define LBLKC		BYTE_REF(LBLKC_ADDR)
+
+#define LBLKC_BD_MASK	0x7f	/* Blink Divisor */
+#define LBLKC_BD_SHIFT	0
+#define LBLKC_BKEN	0x80	/* Blink Enabled */
+
+/*
+ * LCD Panel Interface Configuration Register 
+ */
+#define LPICF_ADDR	0xfffffa20
+#define LPICF		BYTE_REF(LPICF_ADDR)
+
+#define LPICF_GS_MASK	 0x03	 /* Gray-Scale Mode */
+#define	  LPICF_GS_BW	   0x00
+#define   LPICF_GS_GRAY_4  0x01
+#define   LPICF_GS_GRAY_16 0x02
+#define LPICF_PBSIZ_MASK 0x0c	/* Panel Bus Width */
+#define   LPICF_PBSIZ_1	   0x00
+#define   LPICF_PBSIZ_2    0x04
+#define   LPICF_PBSIZ_4    0x08
+
+/*
+ * LCD Polarity Configuration Register 
+ */
+#define LPOLCF_ADDR	0xfffffa21
+#define LPOLCF		BYTE_REF(LPOLCF_ADDR)
+
+#define LPOLCF_PIXPOL	0x01	/* Pixel Polarity */
+#define LPOLCF_LPPOL	0x02	/* Line Pulse Polarity */
+#define LPOLCF_FLMPOL	0x04	/* Frame Marker Polarity */
+#define LPOLCF_LCKPOL	0x08	/* LCD Shift Lock Polarity */
+
+/*
+ * LACD (LCD Alternate Crystal Direction) Rate Control Register
+ */
+#define LACDRC_ADDR	0xfffffa23
+#define LACDRC		BYTE_REF(LACDRC_ADDR)
+
+#define LACDRC_ACDSLT	 0x80	/* Signal Source Select */
+#define LACDRC_ACD_MASK	 0x0f	/* Alternate Crystal Direction Control */
+#define LACDRC_ACD_SHIFT 0
+
+/*
+ * LCD Pixel Clock Divider Register
+ */
+#define LPXCD_ADDR	0xfffffa25
+#define LPXCD		BYTE_REF(LPXCD_ADDR)
+
+#define	LPXCD_PCD_MASK	0x3f 	/* Pixel Clock Divider */
+#define LPXCD_PCD_SHIFT	0
+
+/*
+ * LCD Clocking Control Register
+ */
+#define LCKCON_ADDR	0xfffffa27
+#define LCKCON		BYTE_REF(LCKCON_ADDR)
+
+#define LCKCON_DWS_MASK	 0x0f	/* Display Wait-State */
+#define LCKCON_DWS_SHIFT 0
+#define LCKCON_DWIDTH	 0x40	/* Display Memory Width  */
+#define LCKCON_LCDON	 0x80	/* Enable LCD Controller */
+
+/* '328-compatible definitions */
+#define LCKCON_DW_MASK  LCKCON_DWS_MASK
+#define LCKCON_DW_SHIFT LCKCON_DWS_SHIFT
+ 
+/*
+ * LCD Refresh Rate Adjustment Register 
+ */
+#define LRRA_ADDR	0xfffffa29
+#define LRRA		BYTE_REF(LRRA_ADDR)
+
+/*
+ * LCD Panning Offset Register
+ */
+#define LPOSR_ADDR	0xfffffa2d
+#define LPOSR		BYTE_REF(LPOSR_ADDR)
+
+#define LPOSR_POS_MASK	0x0f	/* Pixel Offset Code */
+#define LPOSR_POS_SHIFT	0
+
+/*
+ * LCD Frame Rate Control Modulation Register
+ */
+#define LFRCM_ADDR	0xfffffa31
+#define LFRCM		BYTE_REF(LFRCM_ADDR)
+
+#define LFRCM_YMOD_MASK	 0x0f	/* Vertical Modulation */
+#define LFRCM_YMOD_SHIFT 0
+#define LFRCM_XMOD_MASK	 0xf0	/* Horizontal Modulation */
+#define LFRCM_XMOD_SHIFT 4
+
+/*
+ * LCD Gray Palette Mapping Register
+ */
+#define LGPMR_ADDR	0xfffffa33
+#define LGPMR		BYTE_REF(LGPMR_ADDR)
+
+#define LGPMR_G1_MASK	0x0f
+#define LGPMR_G1_SHIFT	0
+#define LGPMR_G2_MASK	0xf0
+#define LGPMR_G2_SHIFT	4
+
+/* 
+ * PWM Contrast Control Register
+ */
+#define PWMR_ADDR	0xfffffa36
+#define PWMR		WORD_REF(PWMR_ADDR)
+
+#define PWMR_PW_MASK	0x00ff	/* Pulse Width */
+#define PWMR_PW_SHIFT	0
+#define PWMR_CCPEN	0x0100	/* Contrast Control Enable */
+#define PWMR_SRC_MASK	0x0600	/* Input Clock Source */
+#define   PWMR_SRC_LINE	  0x0000	/* Line Pulse  */
+#define   PWMR_SRC_PIXEL  0x0200	/* Pixel Clock */
+#define   PWMR_SRC_LCD    0x4000	/* LCD clock   */
+
+/**********
+ *
+ * 0xFFFFFBxx -- Real-Time Clock (RTC)
+ *
+ **********/
+
+/*
+ * RTC Hours Minutes and Seconds Register
+ */
+#define RTCTIME_ADDR	0xfffffb00
+#define RTCTIME		LONG_REF(RTCTIME_ADDR)
+
+#define RTCTIME_SECONDS_MASK	0x0000003f	/* Seconds */
+#define RTCTIME_SECONDS_SHIFT	0
+#define RTCTIME_MINUTES_MASK	0x003f0000	/* Minutes */
+#define RTCTIME_MINUTES_SHIFT	16
+#define RTCTIME_HOURS_MASK	0x1f000000	/* Hours */
+#define RTCTIME_HOURS_SHIFT	24
+
+/*
+ *  RTC Alarm Register 
+ */
+#define RTCALRM_ADDR    0xfffffb04
+#define RTCALRM         LONG_REF(RTCALRM_ADDR)
+
+#define RTCALRM_SECONDS_MASK    0x0000003f      /* Seconds */
+#define RTCALRM_SECONDS_SHIFT   0
+#define RTCALRM_MINUTES_MASK    0x003f0000      /* Minutes */
+#define RTCALRM_MINUTES_SHIFT   16
+#define RTCALRM_HOURS_MASK      0x1f000000      /* Hours */
+#define RTCALRM_HOURS_SHIFT     24
+
+/*
+ * Watchdog Timer Register 
+ */
+#define WATCHDOG_ADDR	0xfffffb0a
+#define WATCHDOG	WORD_REF(WATCHDOG_ADDR)
+
+#define WATCHDOG_EN	0x0001	/* Watchdog Enabled */
+#define WATCHDOG_ISEL	0x0002	/* Select the watchdog interrupt */
+#define WATCHDOG_INTF	0x0080	/* Watchdog interrupt occcured */
+#define WATCHDOG_CNT_MASK  0x0300	/* Watchdog Counter */
+#define WATCHDOG_CNT_SHIFT 8
+
+/*
+ * RTC Control Register
+ */
+#define RTCCTL_ADDR	0xfffffb0c
+#define RTCCTL		WORD_REF(RTCCTL_ADDR)
+
+#define RTCCTL_XTL	0x0020	/* Crystal Selection */
+#define RTCCTL_EN	0x0080	/* RTC Enable */
+
+/* '328-compatible definitions */
+#define RTCCTL_384	RTCCTL_XTL
+#define RTCCTL_ENABLE	RTCCTL_EN
+
+/*
+ * RTC Interrupt Status Register 
+ */
+#define RTCISR_ADDR	0xfffffb0e
+#define RTCISR		WORD_REF(RTCISR_ADDR)
+
+#define RTCISR_SW	0x0001	/* Stopwatch timed out */
+#define RTCISR_MIN	0x0002	/* 1-minute interrupt has occurred */
+#define RTCISR_ALM	0x0004	/* Alarm interrupt has occurred */
+#define RTCISR_DAY	0x0008	/* 24-hour rollover interrupt has occurred */
+#define RTCISR_1HZ	0x0010	/* 1Hz interrupt has occurred */
+#define RTCISR_HR	0x0020	/* 1-hour interrupt has occurred */
+#define RTCISR_SAM0	0x0100	/*   4Hz /   4.6875Hz interrupt has occurred */ 
+#define RTCISR_SAM1	0x0200	/*   8Hz /   9.3750Hz interrupt has occurred */ 
+#define RTCISR_SAM2	0x0400	/*  16Hz /  18.7500Hz interrupt has occurred */ 
+#define RTCISR_SAM3	0x0800	/*  32Hz /  37.5000Hz interrupt has occurred */ 
+#define RTCISR_SAM4	0x1000	/*  64Hz /  75.0000Hz interrupt has occurred */ 
+#define RTCISR_SAM5	0x2000	/* 128Hz / 150.0000Hz interrupt has occurred */ 
+#define RTCISR_SAM6	0x4000	/* 256Hz / 300.0000Hz interrupt has occurred */ 
+#define RTCISR_SAM7	0x8000	/* 512Hz / 600.0000Hz interrupt has occurred */ 
+
+/*
+ * RTC Interrupt Enable Register
+ */
+#define RTCIENR_ADDR	0xfffffb10
+#define RTCIENR		WORD_REF(RTCIENR_ADDR)
+
+#define RTCIENR_SW	0x0001	/* Stopwatch interrupt enable */
+#define RTCIENR_MIN	0x0002	/* 1-minute interrupt enable */
+#define RTCIENR_ALM	0x0004	/* Alarm interrupt enable */
+#define RTCIENR_DAY	0x0008	/* 24-hour rollover interrupt enable */
+#define RTCIENR_1HZ	0x0010	/* 1Hz interrupt enable */
+#define RTCIENR_HR	0x0020	/* 1-hour interrupt enable */
+#define RTCIENR_SAM0	0x0100	/*   4Hz /   4.6875Hz interrupt enable */ 
+#define RTCIENR_SAM1	0x0200	/*   8Hz /   9.3750Hz interrupt enable */ 
+#define RTCIENR_SAM2	0x0400	/*  16Hz /  18.7500Hz interrupt enable */ 
+#define RTCIENR_SAM3	0x0800	/*  32Hz /  37.5000Hz interrupt enable */ 
+#define RTCIENR_SAM4	0x1000	/*  64Hz /  75.0000Hz interrupt enable */ 
+#define RTCIENR_SAM5	0x2000	/* 128Hz / 150.0000Hz interrupt enable */ 
+#define RTCIENR_SAM6	0x4000	/* 256Hz / 300.0000Hz interrupt enable */ 
+#define RTCIENR_SAM7	0x8000	/* 512Hz / 600.0000Hz interrupt enable */ 
+
+/* 
+ * Stopwatch Minutes Register
+ */
+#define STPWCH_ADDR	0xfffffb12
+#define STPWCH		WORD_REF(STPWCH)
+
+#define STPWCH_CNT_MASK	 0x003f	/* Stopwatch countdown value */
+#define SPTWCH_CNT_SHIFT 0
+
+/*
+ * RTC Day Count Register 
+ */
+#define DAYR_ADDR	0xfffffb1a
+#define DAYR		WORD_REF(DAYR_ADDR)
+
+#define DAYR_DAYS_MASK	0x1ff	/* Day Setting */
+#define DAYR_DAYS_SHIFT 0
+
+/*
+ * RTC Day Alarm Register 
+ */
+#define DAYALARM_ADDR	0xfffffb1c
+#define DAYALARM	WORD_REF(DAYALARM_ADDR)
+
+#define DAYALARM_DAYSAL_MASK	0x01ff	/* Day Setting of the Alarm */
+#define DAYALARM_DAYSAL_SHIFT 	0
+
+/**********
+ *
+ * 0xFFFFFCxx -- DRAM Controller
+ *
+ **********/
+
+/*
+ * DRAM Memory Configuration Register 
+ */
+#define DRAMMC_ADDR	0xfffffc00
+#define DRAMMC		WORD_REF(DRAMMC_ADDR)
+
+#define DRAMMC_ROW12_MASK	0xc000	/* Row address bit for MD12 */
+#define   DRAMMC_ROW12_PA10	0x0000
+#define   DRAMMC_ROW12_PA21	0x4000	
+#define   DRAMMC_ROW12_PA23	0x8000
+#define	DRAMMC_ROW0_MASK	0x3000	/* Row address bit for MD0 */
+#define	  DRAMMC_ROW0_PA11	0x0000
+#define   DRAMMC_ROW0_PA22	0x1000
+#define   DRAMMC_ROW0_PA23	0x2000
+#define DRAMMC_ROW11		0x0800	/* Row address bit for MD11 PA20/PA22 */
+#define DRAMMC_ROW10		0x0400	/* Row address bit for MD10 PA19/PA21 */
+#define	DRAMMC_ROW9		0x0200	/* Row address bit for MD9  PA9/PA19  */
+#define DRAMMC_ROW8		0x0100	/* Row address bit for MD8  PA10/PA20 */
+#define DRAMMC_COL10		0x0080	/* Col address bit for MD10 PA11/PA0  */
+#define DRAMMC_COL9		0x0040	/* Col address bit for MD9  PA10/PA0  */
+#define DRAMMC_COL8		0x0020	/* Col address bit for MD8  PA9/PA0   */
+#define DRAMMC_REF_MASK		0x001f	/* Reresh Cycle */
+#define DRAMMC_REF_SHIFT	0
+
+/*
+ * DRAM Control Register
+ */
+#define DRAMC_ADDR	0xfffffc02
+#define DRAMC		WORD_REF(DRAMC_ADDR)
+
+#define DRAMC_DWE	   0x0001	/* DRAM Write Enable */
+#define DRAMC_RST	   0x0002	/* Reset Burst Refresh Enable */
+#define DRAMC_LPR	   0x0004	/* Low-Power Refresh Enable */
+#define DRAMC_SLW	   0x0008	/* Slow RAM */
+#define DRAMC_LSP	   0x0010	/* Light Sleep */
+#define DRAMC_MSW	   0x0020	/* Slow Multiplexing */
+#define DRAMC_WS_MASK	   0x00c0	/* Wait-states */
+#define DRAMC_WS_SHIFT	   6
+#define DRAMC_PGSZ_MASK    0x0300	/* Page Size for fast page mode */
+#define DRAMC_PGSZ_SHIFT   8
+#define   DRAMC_PGSZ_256K  0x0000	
+#define   DRAMC_PGSZ_512K  0x0100
+#define   DRAMC_PGSZ_1024K 0x0200
+#define	  DRAMC_PGSZ_2048K 0x0300
+#define DRAMC_EDO	   0x0400	/* EDO DRAM */
+#define DRAMC_CLK	   0x0800	/* Refresh Timer Clock source select */
+#define DRAMC_BC_MASK	   0x3000	/* Page Access Clock Cycle (FP mode) */
+#define DRAMC_BC_SHIFT	   12
+#define DRAMC_RM	   0x4000	/* Refresh Mode */
+#define DRAMC_EN	   0x8000	/* DRAM Controller enable */
+
+
+/**********
+ *
+ * 0xFFFFFDxx -- In-Circuit Emulation (ICE)
+ *
+ **********/
+
+/*
+ * ICE Module Address Compare Register
+ */
+#define ICEMACR_ADDR	0xfffffd00
+#define ICEMACR		LONG_REF(ICEMACR_ADDR)
+
+/*
+ * ICE Module Address Mask Register
+ */
+#define ICEMAMR_ADDR	0xfffffd04
+#define ICEMAMR		LONG_REF(ICEMAMR_ADDR)
+
+/*
+ * ICE Module Control Compare Register
+ */
+#define ICEMCCR_ADDR	0xfffffd08
+#define ICEMCCR		WORD_REF(ICEMCCR_ADDR)
+
+#define ICEMCCR_PD	0x0001	/* Program/Data Cycle Selection */
+#define ICEMCCR_RW	0x0002	/* Read/Write Cycle Selection */
+
+/*
+ * ICE Module Control Mask Register
+ */
+#define ICEMCMR_ADDR	0xfffffd0a
+#define ICEMCMR		WORD_REF(ICEMCMR_ADDR)
+
+#define ICEMCMR_PDM	0x0001	/* Program/Data Cycle Mask */
+#define ICEMCMR_RWM	0x0002	/* Read/Write Cycle Mask */
+
+/*
+ * ICE Module Control Register 
+ */
+#define ICEMCR_ADDR	0xfffffd0c
+#define ICEMCR		WORD_REF(ICEMCR_ADDR)
+
+#define ICEMCR_CEN	0x0001	/* Compare Enable */
+#define ICEMCR_PBEN	0x0002	/* Program Break Enable */
+#define ICEMCR_SB	0x0004	/* Single Breakpoint */
+#define ICEMCR_HMDIS	0x0008	/* HardMap disable */
+#define ICEMCR_BBIEN	0x0010	/* Bus Break Interrupt Enable */
+
+/*
+ * ICE Module Status Register 
+ */
+#define ICEMSR_ADDR	0xfffffd0e
+#define ICEMSR		WORD_REF(ICEMSR_ADDR)
+
+#define ICEMSR_EMUEN	0x0001	/* Emulation Enable */
+#define ICEMSR_BRKIRQ	0x0002	/* A-Line Vector Fetch Detected */
+#define ICEMSR_BBIRQ	0x0004	/* Bus Break Interrupt Detected */
+#define ICEMSR_EMIRQ	0x0008	/* EMUIRQ Falling Edge Detected */
+
+#endif /* _MC68EZ328_H_ */
diff --git a/arch/m68knommu/include/asm/MC68VZ328.h b/arch/m68knommu/include/asm/MC68VZ328.h
new file mode 100644
index 00000000000..2b9bf626a0a
--- /dev/null
+++ b/arch/m68knommu/include/asm/MC68VZ328.h
@@ -0,0 +1,1349 @@
+
+/* include/asm-m68knommu/MC68VZ328.h: 'VZ328 control registers
+ *
+ * Copyright (c) 2000-2001	Lineo Inc. <www.lineo.com>
+ * Copyright (c) 2000-2001	Lineo Canada Corp. <www.lineo.ca>
+ * Copyright (C) 1999		Vladimir Gurevich <vgurevic@cisco.com>
+ * 				Bare & Hare Software, Inc.
+ * Based on include/asm-m68knommu/MC68332.h
+ * Copyright (C) 1998  Kenneth Albanowski <kjahds@kjahds.com>,
+ *                     The Silver Hammer Group, Ltd.
+ *
+ * M68VZ328 fixes by Evan Stawnyczy <evan@lineo.com>
+ * vz multiport fixes by Michael Leslie <mleslie@lineo.com>
+ */
+
+#ifndef _MC68VZ328_H_
+#define _MC68VZ328_H_
+
+#define BYTE_REF(addr) (*((volatile unsigned char*)addr))
+#define WORD_REF(addr) (*((volatile unsigned short*)addr))
+#define LONG_REF(addr) (*((volatile unsigned long*)addr))
+
+#define PUT_FIELD(field, val) (((val) << field##_SHIFT) & field##_MASK)
+#define GET_FIELD(reg, field) (((reg) & field##_MASK) >> field##_SHIFT)
+
+/********** 
+ *
+ * 0xFFFFF0xx -- System Control
+ *
+ **********/
+ 
+/*
+ * System Control Register (SCR)
+ */
+#define SCR_ADDR	0xfffff000
+#define SCR		BYTE_REF(SCR_ADDR)
+
+#define SCR_WDTH8	0x01	/* 8-Bit Width Select */
+#define SCR_DMAP	0x04	/* Double Map */
+#define SCR_SO		0x08	/* Supervisor Only */
+#define SCR_BETEN	0x10	/* Bus-Error Time-Out Enable */
+#define SCR_PRV		0x20	/* Privilege Violation */
+#define SCR_WPV		0x40	/* Write Protect Violation */
+#define SCR_BETO	0x80	/* Bus-Error TimeOut */
+
+/*
+ * Silicon ID Register (Mask Revision Register (MRR) for '328 Compatibility)
+ */
+#define MRR_ADDR 0xfffff004
+#define MRR	 LONG_REF(MRR_ADDR)
+
+/********** 
+ *
+ * 0xFFFFF1xx -- Chip-Select logic
+ *
+ **********/
+ 
+/*
+ * Chip Select Group Base Registers 
+ */
+#define CSGBA_ADDR	0xfffff100
+#define CSGBB_ADDR	0xfffff102
+
+#define CSGBC_ADDR	0xfffff104
+#define CSGBD_ADDR	0xfffff106
+
+#define CSGBA		WORD_REF(CSGBA_ADDR)
+#define CSGBB		WORD_REF(CSGBB_ADDR)
+#define CSGBC		WORD_REF(CSGBC_ADDR)
+#define CSGBD		WORD_REF(CSGBD_ADDR)
+
+/*
+ * Chip Select Registers 
+ */
+#define CSA_ADDR	0xfffff110
+#define CSB_ADDR	0xfffff112
+#define CSC_ADDR	0xfffff114
+#define CSD_ADDR	0xfffff116
+
+#define CSA		WORD_REF(CSA_ADDR)
+#define CSB		WORD_REF(CSB_ADDR)
+#define CSC		WORD_REF(CSC_ADDR)
+#define CSD		WORD_REF(CSD_ADDR)
+
+#define CSA_EN		0x0001		/* Chip-Select Enable */
+#define CSA_SIZ_MASK	0x000e		/* Chip-Select Size */
+#define CSA_SIZ_SHIFT   1
+#define CSA_WS_MASK	0x0070		/* Wait State */
+#define CSA_WS_SHIFT    4
+#define CSA_BSW		0x0080		/* Data Bus Width */
+#define CSA_FLASH	0x0100		/* FLASH Memory Support */
+#define CSA_RO		0x8000		/* Read-Only */
+
+#define CSB_EN		0x0001		/* Chip-Select Enable */
+#define CSB_SIZ_MASK	0x000e		/* Chip-Select Size */
+#define CSB_SIZ_SHIFT   1
+#define CSB_WS_MASK	0x0070		/* Wait State */
+#define CSB_WS_SHIFT    4
+#define CSB_BSW		0x0080		/* Data Bus Width */
+#define CSB_FLASH	0x0100		/* FLASH Memory Support */
+#define CSB_UPSIZ_MASK	0x1800		/* Unprotected memory block size */
+#define CSB_UPSIZ_SHIFT 11
+#define CSB_ROP		0x2000		/* Readonly if protected */
+#define CSB_SOP		0x4000		/* Supervisor only if protected */
+#define CSB_RO		0x8000		/* Read-Only */
+
+#define CSC_EN		0x0001		/* Chip-Select Enable */
+#define CSC_SIZ_MASK	0x000e		/* Chip-Select Size */
+#define CSC_SIZ_SHIFT   1
+#define CSC_WS_MASK	0x0070		/* Wait State */
+#define CSC_WS_SHIFT    4
+#define CSC_BSW		0x0080		/* Data Bus Width */
+#define CSC_FLASH	0x0100		/* FLASH Memory Support */
+#define CSC_UPSIZ_MASK	0x1800		/* Unprotected memory block size */
+#define CSC_UPSIZ_SHIFT 11
+#define CSC_ROP		0x2000		/* Readonly if protected */
+#define CSC_SOP		0x4000		/* Supervisor only if protected */
+#define CSC_RO		0x8000		/* Read-Only */
+
+#define CSD_EN		0x0001		/* Chip-Select Enable */
+#define CSD_SIZ_MASK	0x000e		/* Chip-Select Size */
+#define CSD_SIZ_SHIFT   1
+#define CSD_WS_MASK	0x0070		/* Wait State */
+#define CSD_WS_SHIFT    4
+#define CSD_BSW		0x0080		/* Data Bus Width */
+#define CSD_FLASH	0x0100		/* FLASH Memory Support */
+#define CSD_DRAM	0x0200		/* Dram Selection */
+#define	CSD_COMB	0x0400		/* Combining */
+#define CSD_UPSIZ_MASK	0x1800		/* Unprotected memory block size */
+#define CSD_UPSIZ_SHIFT 11
+#define CSD_ROP		0x2000		/* Readonly if protected */
+#define CSD_SOP		0x4000		/* Supervisor only if protected */
+#define CSD_RO		0x8000		/* Read-Only */
+
+/*
+ * Emulation Chip-Select Register 
+ */
+#define EMUCS_ADDR	0xfffff118
+#define EMUCS		WORD_REF(EMUCS_ADDR)
+
+#define EMUCS_WS_MASK	0x0070
+#define EMUCS_WS_SHIFT	4
+
+/********** 
+ *
+ * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control
+ *
+ **********/
+
+/*
+ * PLL Control Register 
+ */
+#define PLLCR_ADDR	0xfffff200
+#define PLLCR		WORD_REF(PLLCR_ADDR)
+
+#define PLLCR_DISPLL	       0x0008	/* Disable PLL */
+#define PLLCR_CLKEN	       0x0010	/* Clock (CLKO pin) enable */
+#define PLLCR_PRESC	       0x0020	/* VCO prescaler */
+#define PLLCR_SYSCLK_SEL_MASK  0x0700	/* System Clock Selection */
+#define PLLCR_SYSCLK_SEL_SHIFT 8
+#define PLLCR_LCDCLK_SEL_MASK  0x3800	/* LCD Clock Selection */
+#define PLLCR_LCDCLK_SEL_SHIFT 11
+
+/* '328-compatible definitions */
+#define PLLCR_PIXCLK_SEL_MASK	PLLCR_LCDCLK_SEL_MASK
+#define PLLCR_PIXCLK_SEL_SHIFT	PLLCR_LCDCLK_SEL_SHIFT
+
+/*
+ * PLL Frequency Select Register
+ */
+#define PLLFSR_ADDR	0xfffff202
+#define PLLFSR		WORD_REF(PLLFSR_ADDR)
+
+#define PLLFSR_PC_MASK	0x00ff		/* P Count */
+#define PLLFSR_PC_SHIFT 0
+#define PLLFSR_QC_MASK	0x0f00		/* Q Count */
+#define PLLFSR_QC_SHIFT 8
+#define PLLFSR_PROT	0x4000		/* Protect P & Q */
+#define PLLFSR_CLK32	0x8000		/* Clock 32 (kHz) */
+
+/*
+ * Power Control Register
+ */
+#define PCTRL_ADDR	0xfffff207
+#define PCTRL		BYTE_REF(PCTRL_ADDR)
+
+#define PCTRL_WIDTH_MASK	0x1f	/* CPU Clock bursts width */
+#define PCTRL_WIDTH_SHIFT	0
+#define PCTRL_PCEN		0x80	/* Power Control Enable */
+
+/**********
+ *
+ * 0xFFFFF3xx -- Interrupt Controller
+ *
+ **********/
+
+/* 
+ * Interrupt Vector Register
+ */
+#define IVR_ADDR	0xfffff300
+#define IVR		BYTE_REF(IVR_ADDR)
+
+#define IVR_VECTOR_MASK 0xF8
+
+/*
+ * Interrupt control Register
+ */
+#define ICR_ADDR	0xfffff302
+#define ICR		WORD_REF(ICR_ADDR)
+
+#define ICR_POL5	0x0080	/* Polarity Control for IRQ5 */
+#define ICR_ET6		0x0100	/* Edge Trigger Select for IRQ6 */
+#define ICR_ET3		0x0200	/* Edge Trigger Select for IRQ3 */
+#define ICR_ET2		0x0400	/* Edge Trigger Select for IRQ2 */
+#define ICR_ET1		0x0800	/* Edge Trigger Select for IRQ1 */
+#define ICR_POL6	0x1000	/* Polarity Control for IRQ6 */
+#define ICR_POL3	0x2000	/* Polarity Control for IRQ3 */
+#define ICR_POL2	0x4000	/* Polarity Control for IRQ2 */
+#define ICR_POL1	0x8000	/* Polarity Control for IRQ1 */
+
+/*
+ * Interrupt Mask Register
+ */
+#define IMR_ADDR	0xfffff304
+#define IMR		LONG_REF(IMR_ADDR)
+
+/*
+ * Define the names for bit positions first. This is useful for 
+ * request_irq
+ */
+#define SPI2_IRQ_NUM	0	/* SPI 2 interrupt */
+#define TMR_IRQ_NUM	1	/* Timer 1 interrupt */
+#define UART1_IRQ_NUM	2	/* UART 1 interrupt */	
+#define	WDT_IRQ_NUM	3	/* Watchdog Timer interrupt */
+#define RTC_IRQ_NUM	4	/* RTC interrupt */
+#define TMR2_IRQ_NUM	5	/* Timer 2 interrupt */
+#define	KB_IRQ_NUM	6	/* Keyboard Interrupt */
+#define PWM1_IRQ_NUM	7	/* Pulse-Width Modulator 1 int. */
+#define	INT0_IRQ_NUM	8	/* External INT0 */
+#define	INT1_IRQ_NUM	9	/* External INT1 */
+#define	INT2_IRQ_NUM	10	/* External INT2 */
+#define	INT3_IRQ_NUM	11	/* External INT3 */
+#define UART2_IRQ_NUM	12	/* UART 2 interrupt */	
+#define PWM2_IRQ_NUM	13	/* Pulse-Width Modulator 1 int. */
+#define IRQ1_IRQ_NUM	16	/* IRQ1 */
+#define IRQ2_IRQ_NUM	17	/* IRQ2 */
+#define IRQ3_IRQ_NUM	18	/* IRQ3 */
+#define IRQ6_IRQ_NUM	19	/* IRQ6 */
+#define IRQ5_IRQ_NUM	20	/* IRQ5 */
+#define SPI1_IRQ_NUM	21	/* SPI 1 interrupt */
+#define SAM_IRQ_NUM	22	/* Sampling Timer for RTC */
+#define EMIQ_IRQ_NUM	23	/* Emulator Interrupt */
+
+#define SPI_IRQ_NUM	SPI2_IRQ_NUM
+
+/* '328-compatible definitions */
+#define SPIM_IRQ_NUM	SPI_IRQ_NUM
+#define TMR1_IRQ_NUM	TMR_IRQ_NUM
+#define UART_IRQ_NUM	UART1_IRQ_NUM
+
+/* 
+ * Here go the bitmasks themselves
+ */
+#define IMR_MSPI 	(1 << SPI_IRQ_NUM)	/* Mask SPI interrupt */
+#define	IMR_MTMR	(1 << TMR_IRQ_NUM)	/* Mask Timer interrupt */
+#define IMR_MUART	(1 << UART_IRQ_NUM)	/* Mask UART interrupt */	
+#define	IMR_MWDT	(1 << WDT_IRQ_NUM)	/* Mask Watchdog Timer interrupt */
+#define IMR_MRTC	(1 << RTC_IRQ_NUM)	/* Mask RTC interrupt */
+#define	IMR_MKB		(1 << KB_IRQ_NUM)	/* Mask Keyboard Interrupt */
+#define IMR_MPWM	(1 << PWM_IRQ_NUM)	/* Mask Pulse-Width Modulator int. */
+#define	IMR_MINT0	(1 << INT0_IRQ_NUM)	/* Mask External INT0 */
+#define	IMR_MINT1	(1 << INT1_IRQ_NUM)	/* Mask External INT1 */
+#define	IMR_MINT2	(1 << INT2_IRQ_NUM)	/* Mask External INT2 */
+#define	IMR_MINT3	(1 << INT3_IRQ_NUM)	/* Mask External INT3 */
+#define IMR_MIRQ1	(1 << IRQ1_IRQ_NUM)	/* Mask IRQ1 */
+#define IMR_MIRQ2	(1 << IRQ2_IRQ_NUM)	/* Mask IRQ2 */
+#define IMR_MIRQ3	(1 << IRQ3_IRQ_NUM)	/* Mask IRQ3 */
+#define IMR_MIRQ6	(1 << IRQ6_IRQ_NUM)	/* Mask IRQ6 */
+#define IMR_MIRQ5	(1 << IRQ5_IRQ_NUM)	/* Mask IRQ5 */
+#define IMR_MSAM	(1 << SAM_IRQ_NUM)	/* Mask Sampling Timer for RTC */
+#define IMR_MEMIQ	(1 << EMIQ_IRQ_NUM)	/* Mask Emulator Interrupt */
+
+/* '328-compatible definitions */
+#define IMR_MSPIM	IMR_MSPI
+#define IMR_MTMR1	IMR_MTMR
+
+/* 
+ * Interrupt Status Register 
+ */
+#define ISR_ADDR	0xfffff30c
+#define ISR		LONG_REF(ISR_ADDR)
+
+#define ISR_SPI 	(1 << SPI_IRQ_NUM)	/* SPI interrupt */
+#define	ISR_TMR		(1 << TMR_IRQ_NUM)	/* Timer interrupt */
+#define ISR_UART	(1 << UART_IRQ_NUM)	/* UART interrupt */	
+#define	ISR_WDT		(1 << WDT_IRQ_NUM)	/* Watchdog Timer interrupt */
+#define ISR_RTC		(1 << RTC_IRQ_NUM)	/* RTC interrupt */
+#define	ISR_KB		(1 << KB_IRQ_NUM)	/* Keyboard Interrupt */
+#define ISR_PWM		(1 << PWM_IRQ_NUM)	/* Pulse-Width Modulator interrupt */
+#define	ISR_INT0	(1 << INT0_IRQ_NUM)	/* External INT0 */
+#define	ISR_INT1	(1 << INT1_IRQ_NUM)	/* External INT1 */
+#define	ISR_INT2	(1 << INT2_IRQ_NUM)	/* External INT2 */
+#define	ISR_INT3	(1 << INT3_IRQ_NUM)	/* External INT3 */
+#define ISR_IRQ1	(1 << IRQ1_IRQ_NUM)	/* IRQ1 */
+#define ISR_IRQ2	(1 << IRQ2_IRQ_NUM)	/* IRQ2 */
+#define ISR_IRQ3	(1 << IRQ3_IRQ_NUM)	/* IRQ3 */
+#define ISR_IRQ6	(1 << IRQ6_IRQ_NUM)	/* IRQ6 */
+#define ISR_IRQ5	(1 << IRQ5_IRQ_NUM)	/* IRQ5 */
+#define ISR_SAM		(1 << SAM_IRQ_NUM)	/* Sampling Timer for RTC */
+#define ISR_EMIQ	(1 << EMIQ_IRQ_NUM)	/* Emulator Interrupt */
+
+/* '328-compatible definitions */
+#define ISR_SPIM	ISR_SPI
+#define ISR_TMR1	ISR_TMR
+
+/* 
+ * Interrupt Pending Register 
+ */
+#define IPR_ADDR	0xfffff30c
+#define IPR		LONG_REF(IPR_ADDR)
+
+#define IPR_SPI 	(1 << SPI_IRQ_NUM)	/* SPI interrupt */
+#define	IPR_TMR		(1 << TMR_IRQ_NUM)	/* Timer interrupt */
+#define IPR_UART	(1 << UART_IRQ_NUM)	/* UART interrupt */	
+#define	IPR_WDT		(1 << WDT_IRQ_NUM)	/* Watchdog Timer interrupt */
+#define IPR_RTC		(1 << RTC_IRQ_NUM)	/* RTC interrupt */
+#define	IPR_KB		(1 << KB_IRQ_NUM)	/* Keyboard Interrupt */
+#define IPR_PWM		(1 << PWM_IRQ_NUM)	/* Pulse-Width Modulator interrupt */
+#define	IPR_INT0	(1 << INT0_IRQ_NUM)	/* External INT0 */
+#define	IPR_INT1	(1 << INT1_IRQ_NUM)	/* External INT1 */
+#define	IPR_INT2	(1 << INT2_IRQ_NUM)	/* External INT2 */
+#define	IPR_INT3	(1 << INT3_IRQ_NUM)	/* External INT3 */
+#define IPR_IRQ1	(1 << IRQ1_IRQ_NUM)	/* IRQ1 */
+#define IPR_IRQ2	(1 << IRQ2_IRQ_NUM)	/* IRQ2 */
+#define IPR_IRQ3	(1 << IRQ3_IRQ_NUM)	/* IRQ3 */
+#define IPR_IRQ6	(1 << IRQ6_IRQ_NUM)	/* IRQ6 */
+#define IPR_IRQ5	(1 << IRQ5_IRQ_NUM)	/* IRQ5 */
+#define IPR_SAM		(1 << SAM_IRQ_NUM)	/* Sampling Timer for RTC */
+#define IPR_EMIQ	(1 << EMIQ_IRQ_NUM)	/* Emulator Interrupt */
+
+/* '328-compatible definitions */
+#define IPR_SPIM	IPR_SPI
+#define IPR_TMR1	IPR_TMR
+
+/**********
+ *
+ * 0xFFFFF4xx -- Parallel Ports
+ *
+ **********/
+
+/*
+ * Port A
+ */
+#define PADIR_ADDR	0xfffff400		/* Port A direction reg */
+#define PADATA_ADDR	0xfffff401		/* Port A data register */
+#define PAPUEN_ADDR	0xfffff402		/* Port A Pull-Up enable reg */
+
+#define PADIR		BYTE_REF(PADIR_ADDR)
+#define PADATA		BYTE_REF(PADATA_ADDR)
+#define PAPUEN		BYTE_REF(PAPUEN_ADDR)
+
+#define PA(x)		(1 << (x))
+
+/* 
+ * Port B
+ */
+#define PBDIR_ADDR	0xfffff408		/* Port B direction reg */
+#define PBDATA_ADDR	0xfffff409		/* Port B data register */
+#define PBPUEN_ADDR	0xfffff40a		/* Port B Pull-Up enable reg */
+#define PBSEL_ADDR	0xfffff40b		/* Port B Select Register */
+
+#define PBDIR		BYTE_REF(PBDIR_ADDR)
+#define PBDATA		BYTE_REF(PBDATA_ADDR)
+#define PBPUEN		BYTE_REF(PBPUEN_ADDR)
+#define PBSEL		BYTE_REF(PBSEL_ADDR)
+
+#define PB(x)		(1 << (x))
+
+#define PB_CSB0		0x01	/* Use CSB0      as PB[0] */
+#define PB_CSB1		0x02	/* Use CSB1      as PB[1] */
+#define PB_CSC0_RAS0	0x04    /* Use CSC0/RAS0 as PB[2] */	
+#define PB_CSC1_RAS1	0x08    /* Use CSC1/RAS1 as PB[3] */	
+#define PB_CSD0_CAS0	0x10    /* Use CSD0/CAS0 as PB[4] */	
+#define PB_CSD1_CAS1	0x20    /* Use CSD1/CAS1 as PB[5] */
+#define PB_TIN_TOUT	0x40	/* Use TIN/TOUT  as PB[6] */
+#define PB_PWMO		0x80	/* Use PWMO      as PB[7] */
+
+/* 
+ * Port C
+ */
+#define PCDIR_ADDR	0xfffff410		/* Port C direction reg */
+#define PCDATA_ADDR	0xfffff411		/* Port C data register */
+#define PCPDEN_ADDR	0xfffff412		/* Port C Pull-Down enb. reg */
+#define PCSEL_ADDR	0xfffff413		/* Port C Select Register */
+
+#define PCDIR		BYTE_REF(PCDIR_ADDR)
+#define PCDATA		BYTE_REF(PCDATA_ADDR)
+#define PCPDEN		BYTE_REF(PCPDEN_ADDR)
+#define PCSEL		BYTE_REF(PCSEL_ADDR)
+
+#define PC(x)		(1 << (x))
+
+#define PC_LD0		0x01	/* Use LD0  as PC[0] */
+#define PC_LD1		0x02	/* Use LD1  as PC[1] */
+#define PC_LD2		0x04	/* Use LD2  as PC[2] */
+#define PC_LD3		0x08	/* Use LD3  as PC[3] */
+#define PC_LFLM		0x10	/* Use LFLM as PC[4] */
+#define PC_LLP 		0x20	/* Use LLP  as PC[5] */
+#define PC_LCLK		0x40	/* Use LCLK as PC[6] */
+#define PC_LACD		0x80	/* Use LACD as PC[7] */
+
+/* 
+ * Port D
+ */
+#define PDDIR_ADDR	0xfffff418		/* Port D direction reg */
+#define PDDATA_ADDR	0xfffff419		/* Port D data register */
+#define PDPUEN_ADDR	0xfffff41a		/* Port D Pull-Up enable reg */
+#define PDSEL_ADDR	0xfffff41b		/* Port D Select Register */
+#define PDPOL_ADDR	0xfffff41c		/* Port D Polarity Register */
+#define PDIRQEN_ADDR	0xfffff41d		/* Port D IRQ enable register */
+#define PDKBEN_ADDR	0xfffff41e		/* Port D Keyboard Enable reg */
+#define	PDIQEG_ADDR	0xfffff41f		/* Port D IRQ Edge Register */
+
+#define PDDIR		BYTE_REF(PDDIR_ADDR)
+#define PDDATA		BYTE_REF(PDDATA_ADDR)
+#define PDPUEN		BYTE_REF(PDPUEN_ADDR)
+#define PDSEL		BYTE_REF(PDSEL_ADDR)
+#define	PDPOL		BYTE_REF(PDPOL_ADDR)
+#define PDIRQEN		BYTE_REF(PDIRQEN_ADDR)
+#define PDKBEN		BYTE_REF(PDKBEN_ADDR)
+#define PDIQEG		BYTE_REF(PDIQEG_ADDR)
+
+#define PD(x)		(1 << (x))
+
+#define PD_INT0		0x01	/* Use INT0 as PD[0] */
+#define PD_INT1		0x02	/* Use INT1 as PD[1] */
+#define PD_INT2		0x04	/* Use INT2 as PD[2] */
+#define PD_INT3		0x08	/* Use INT3 as PD[3] */
+#define PD_IRQ1		0x10	/* Use IRQ1 as PD[4] */
+#define PD_IRQ2		0x20	/* Use IRQ2 as PD[5] */
+#define PD_IRQ3		0x40	/* Use IRQ3 as PD[6] */
+#define PD_IRQ6		0x80	/* Use IRQ6 as PD[7] */
+
+/* 
+ * Port E
+ */
+#define PEDIR_ADDR	0xfffff420		/* Port E direction reg */
+#define PEDATA_ADDR	0xfffff421		/* Port E data register */
+#define PEPUEN_ADDR	0xfffff422		/* Port E Pull-Up enable reg */
+#define PESEL_ADDR	0xfffff423		/* Port E Select Register */
+
+#define PEDIR		BYTE_REF(PEDIR_ADDR)
+#define PEDATA		BYTE_REF(PEDATA_ADDR)
+#define PEPUEN		BYTE_REF(PEPUEN_ADDR)
+#define PESEL		BYTE_REF(PESEL_ADDR)
+
+#define PE(x)		(1 << (x))
+
+#define PE_SPMTXD	0x01	/* Use SPMTXD as PE[0] */
+#define PE_SPMRXD	0x02	/* Use SPMRXD as PE[1] */
+#define PE_SPMCLK	0x04	/* Use SPMCLK as PE[2] */
+#define PE_DWE		0x08	/* Use DWE    as PE[3] */
+#define PE_RXD		0x10	/* Use RXD    as PE[4] */
+#define PE_TXD		0x20	/* Use TXD    as PE[5] */
+#define PE_RTS		0x40	/* Use RTS    as PE[6] */
+#define PE_CTS		0x80	/* Use CTS    as PE[7] */
+
+/* 
+ * Port F
+ */
+#define PFDIR_ADDR	0xfffff428		/* Port F direction reg */
+#define PFDATA_ADDR	0xfffff429		/* Port F data register */
+#define PFPUEN_ADDR	0xfffff42a		/* Port F Pull-Up enable reg */
+#define PFSEL_ADDR	0xfffff42b		/* Port F Select Register */
+
+#define PFDIR		BYTE_REF(PFDIR_ADDR)
+#define PFDATA		BYTE_REF(PFDATA_ADDR)
+#define PFPUEN		BYTE_REF(PFPUEN_ADDR)
+#define PFSEL		BYTE_REF(PFSEL_ADDR)
+
+#define PF(x)		(1 << (x))
+
+#define PF_LCONTRAST	0x01	/* Use LCONTRAST as PF[0] */
+#define PF_IRQ5         0x02    /* Use IRQ5      as PF[1] */
+#define PF_CLKO         0x04    /* Use CLKO      as PF[2] */
+#define PF_A20          0x08    /* Use A20       as PF[3] */
+#define PF_A21          0x10    /* Use A21       as PF[4] */
+#define PF_A22          0x20    /* Use A22       as PF[5] */
+#define PF_A23          0x40    /* Use A23       as PF[6] */
+#define PF_CSA1		0x80    /* Use CSA1      as PF[7] */
+
+/* 
+ * Port G
+ */
+#define PGDIR_ADDR	0xfffff430		/* Port G direction reg */
+#define PGDATA_ADDR	0xfffff431		/* Port G data register */
+#define PGPUEN_ADDR	0xfffff432		/* Port G Pull-Up enable reg */
+#define PGSEL_ADDR	0xfffff433		/* Port G Select Register */
+
+#define PGDIR		BYTE_REF(PGDIR_ADDR)
+#define PGDATA		BYTE_REF(PGDATA_ADDR)
+#define PGPUEN		BYTE_REF(PGPUEN_ADDR)
+#define PGSEL		BYTE_REF(PGSEL_ADDR)
+
+#define PG(x)		(1 << (x))
+
+#define PG_BUSW_DTACK	0x01	/* Use BUSW/DTACK as PG[0] */
+#define PG_A0		0x02	/* Use A0         as PG[1] */
+#define PG_EMUIRQ	0x04	/* Use EMUIRQ     as PG[2] */
+#define PG_HIZ_P_D	0x08	/* Use HIZ/P/D    as PG[3] */
+#define PG_EMUCS        0x10	/* Use EMUCS      as PG[4] */
+#define PG_EMUBRK	0x20	/* Use EMUBRK     as PG[5] */
+
+/* 
+ * Port J
+ */
+#define PJDIR_ADDR	0xfffff438		/* Port J direction reg */
+#define PJDATA_ADDR	0xfffff439		/* Port J data register */
+#define PJPUEN_ADDR	0xfffff43A		/* Port J Pull-Up enb. reg */
+#define PJSEL_ADDR	0xfffff43B		/* Port J Select Register */
+
+#define PJDIR		BYTE_REF(PJDIR_ADDR)
+#define PJDATA		BYTE_REF(PJDATA_ADDR)
+#define PJPUEN		BYTE_REF(PJPUEN_ADDR)
+#define PJSEL		BYTE_REF(PJSEL_ADDR)
+
+#define PJ(x)		(1 << (x))
+
+/*
+ * Port K
+ */
+#define PKDIR_ADDR	0xfffff440		/* Port K direction reg */
+#define PKDATA_ADDR	0xfffff441		/* Port K data register */
+#define PKPUEN_ADDR	0xfffff442		/* Port K Pull-Up enb. reg */
+#define PKSEL_ADDR	0xfffff443		/* Port K Select Register */
+
+#define PKDIR		BYTE_REF(PKDIR_ADDR)
+#define PKDATA		BYTE_REF(PKDATA_ADDR)
+#define PKPUEN		BYTE_REF(PKPUEN_ADDR)
+#define PKSEL		BYTE_REF(PKSEL_ADDR)
+
+#define PK(x)		(1 << (x))
+
+#define PK_DATAREADY		0x01	/* Use ~DATA_READY  as PK[0] */
+#define PK_PWM2		0x01	/* Use PWM2  as PK[0] */
+#define PK_R_W		0x02	/* Use R/W  as PK[1] */
+#define PK_LDS		0x04	/* Use /LDS  as PK[2] */
+#define PK_UDS		0x08	/* Use /UDS  as PK[3] */
+#define PK_LD4		0x10	/* Use LD4 as PK[4] */
+#define PK_LD5 		0x20	/* Use LD5  as PK[5] */
+#define PK_LD6		0x40	/* Use LD6 as PK[6] */
+#define PK_LD7		0x80	/* Use LD7 as PK[7] */
+
+#define PJDIR_ADDR	0xfffff438		/* Port J direction reg */
+#define PJDATA_ADDR	0xfffff439		/* Port J data register */
+#define PJPUEN_ADDR	0xfffff43A		/* Port J Pull-Up enable reg */
+#define PJSEL_ADDR	0xfffff43B		/* Port J Select Register */
+
+#define PJDIR		BYTE_REF(PJDIR_ADDR)
+#define PJDATA		BYTE_REF(PJDATA_ADDR)
+#define PJPUEN		BYTE_REF(PJPUEN_ADDR)
+#define PJSEL		BYTE_REF(PJSEL_ADDR)
+
+#define PJ(x)		(1 << (x))
+
+#define PJ_MOSI 	0x01	/* Use MOSI       as PJ[0] */
+#define PJ_MISO		0x02	/* Use MISO       as PJ[1] */
+#define PJ_SPICLK1  	0x04	/* Use SPICLK1    as PJ[2] */
+#define PJ_SS   	0x08	/* Use SS         as PJ[3] */
+#define PJ_RXD2         0x10	/* Use RXD2       as PJ[4] */
+#define PJ_TXD2  	0x20	/* Use TXD2       as PJ[5] */
+#define PJ_RTS2  	0x40	/* Use RTS2       as PJ[5] */
+#define PJ_CTS2  	0x80	/* Use CTS2       as PJ[5] */
+
+/*
+ * Port M
+ */
+#define PMDIR_ADDR	0xfffff448		/* Port M direction reg */
+#define PMDATA_ADDR	0xfffff449		/* Port M data register */
+#define PMPUEN_ADDR	0xfffff44a		/* Port M Pull-Up enable reg */
+#define PMSEL_ADDR	0xfffff44b		/* Port M Select Register */
+
+#define PMDIR		BYTE_REF(PMDIR_ADDR)
+#define PMDATA		BYTE_REF(PMDATA_ADDR)
+#define PMPUEN		BYTE_REF(PMPUEN_ADDR)
+#define PMSEL		BYTE_REF(PMSEL_ADDR)
+
+#define PM(x)		(1 << (x))
+
+#define PM_SDCLK	0x01	/* Use SDCLK      as PM[0] */
+#define PM_SDCE		0x02	/* Use SDCE       as PM[1] */
+#define PM_DQMH 	0x04	/* Use DQMH       as PM[2] */
+#define PM_DQML 	0x08	/* Use DQML       as PM[3] */
+#define PM_SDA10        0x10	/* Use SDA10      as PM[4] */
+#define PM_DMOE 	0x20	/* Use DMOE       as PM[5] */
+
+/**********
+ *
+ * 0xFFFFF5xx -- Pulse-Width Modulator (PWM)
+ *
+ **********/
+
+/*
+ * PWM Control Register
+ */
+#define PWMC_ADDR	0xfffff500
+#define PWMC		WORD_REF(PWMC_ADDR)
+
+#define PWMC_CLKSEL_MASK	0x0003	/* Clock Selection */
+#define PWMC_CLKSEL_SHIFT	0
+#define PWMC_REPEAT_MASK	0x000c	/* Sample Repeats */
+#define PWMC_REPEAT_SHIFT	2
+#define PWMC_EN			0x0010	/* Enable PWM */
+#define PMNC_FIFOAV		0x0020	/* FIFO Available */
+#define PWMC_IRQEN		0x0040	/* Interrupt Request Enable */
+#define PWMC_IRQ		0x0080	/* Interrupt Request (FIFO empty) */
+#define PWMC_PRESCALER_MASK	0x7f00	/* Incoming Clock prescaler */
+#define PWMC_PRESCALER_SHIFT	8
+#define PWMC_CLKSRC		0x8000	/* Clock Source Select */
+
+/* '328-compatible definitions */
+#define PWMC_PWMEN	PWMC_EN
+
+/*
+ * PWM Sample Register 
+ */
+#define PWMS_ADDR	0xfffff502
+#define PWMS		WORD_REF(PWMS_ADDR)
+
+/*
+ * PWM Period Register
+ */
+#define PWMP_ADDR	0xfffff504
+#define PWMP		BYTE_REF(PWMP_ADDR)
+
+/*
+ * PWM Counter Register
+ */
+#define PWMCNT_ADDR	0xfffff505
+#define PWMCNT		BYTE_REF(PWMCNT_ADDR)
+
+/**********
+ *
+ * 0xFFFFF6xx -- General-Purpose Timer
+ *
+ **********/
+
+/* 
+ * Timer Control register
+ */
+#define TCTL_ADDR	0xfffff600
+#define TCTL		WORD_REF(TCTL_ADDR)
+
+#define	TCTL_TEN		0x0001	/* Timer Enable  */
+#define TCTL_CLKSOURCE_MASK 	0x000e	/* Clock Source: */
+#define   TCTL_CLKSOURCE_STOP	   0x0000	/* Stop count (disabled)    */
+#define   TCTL_CLKSOURCE_SYSCLK	   0x0002	/* SYSCLK to prescaler      */
+#define   TCTL_CLKSOURCE_SYSCLK_16 0x0004	/* SYSCLK/16 to prescaler   */
+#define   TCTL_CLKSOURCE_TIN	   0x0006	/* TIN to prescaler         */
+#define   TCTL_CLKSOURCE_32KHZ	   0x0008	/* 32kHz clock to prescaler */
+#define TCTL_IRQEN		0x0010	/* IRQ Enable    */
+#define TCTL_OM			0x0020	/* Output Mode   */
+#define TCTL_CAP_MASK		0x00c0	/* Capture Edge: */
+#define	  TCTL_CAP_RE		0x0040		/* Capture on rizing edge   */
+#define   TCTL_CAP_FE		0x0080		/* Capture on falling edge  */
+#define TCTL_FRR		0x0010	/* Free-Run Mode */
+
+/* '328-compatible definitions */
+#define TCTL1_ADDR	TCTL_ADDR
+#define TCTL1		TCTL
+
+/*
+ * Timer Prescaler Register
+ */
+#define TPRER_ADDR	0xfffff602
+#define TPRER		WORD_REF(TPRER_ADDR)
+
+/* '328-compatible definitions */
+#define TPRER1_ADDR	TPRER_ADDR
+#define TPRER1		TPRER
+
+/*
+ * Timer Compare Register
+ */
+#define TCMP_ADDR	0xfffff604
+#define TCMP		WORD_REF(TCMP_ADDR)
+
+/* '328-compatible definitions */
+#define TCMP1_ADDR	TCMP_ADDR
+#define TCMP1		TCMP
+
+/*
+ * Timer Capture register
+ */
+#define TCR_ADDR	0xfffff606
+#define TCR		WORD_REF(TCR_ADDR)
+
+/* '328-compatible definitions */
+#define TCR1_ADDR	TCR_ADDR
+#define TCR1		TCR
+
+/*
+ * Timer Counter Register
+ */
+#define TCN_ADDR	0xfffff608
+#define TCN		WORD_REF(TCN_ADDR)
+
+/* '328-compatible definitions */
+#define TCN1_ADDR	TCN_ADDR
+#define TCN1		TCN
+
+/*
+ * Timer Status Register
+ */
+#define TSTAT_ADDR	0xfffff60a
+#define TSTAT		WORD_REF(TSTAT_ADDR)
+
+#define TSTAT_COMP	0x0001		/* Compare Event occurred */
+#define TSTAT_CAPT	0x0001		/* Capture Event occurred */
+
+/* '328-compatible definitions */
+#define TSTAT1_ADDR	TSTAT_ADDR
+#define TSTAT1		TSTAT
+
+/**********
+ *
+ * 0xFFFFF8xx -- Serial Periferial Interface Master (SPIM)
+ *
+ **********/
+
+/*
+ * SPIM Data Register
+ */
+#define SPIMDATA_ADDR	0xfffff800
+#define SPIMDATA	WORD_REF(SPIMDATA_ADDR)
+
+/*
+ * SPIM Control/Status Register
+ */
+#define SPIMCONT_ADDR	0xfffff802
+#define SPIMCONT	WORD_REF(SPIMCONT_ADDR)
+
+#define SPIMCONT_BIT_COUNT_MASK	 0x000f	/* Transfer Length in Bytes */
+#define SPIMCONT_BIT_COUNT_SHIFT 0
+#define SPIMCONT_POL		 0x0010	/* SPMCLK Signel Polarity */
+#define	SPIMCONT_PHA		 0x0020	/* Clock/Data phase relationship */
+#define SPIMCONT_IRQEN		 0x0040 /* IRQ Enable */
+#define SPIMCONT_IRQ		 0x0080	/* Interrupt Request */
+#define SPIMCONT_XCH		 0x0100	/* Exchange */
+#define SPIMCONT_ENABLE		 0x0200	/* Enable SPIM */
+#define SPIMCONT_DATA_RATE_MASK	 0xe000	/* SPIM Data Rate */
+#define SPIMCONT_DATA_RATE_SHIFT 13
+
+/* '328-compatible definitions */
+#define SPIMCONT_SPIMIRQ	SPIMCONT_IRQ
+#define SPIMCONT_SPIMEN		SPIMCONT_ENABLE
+
+/**********
+ *
+ * 0xFFFFF9xx -- UART
+ *
+ **********/
+
+/*
+ * UART Status/Control Register
+ */
+
+#define USTCNT_ADDR	0xfffff900
+#define USTCNT		WORD_REF(USTCNT_ADDR)
+
+#define USTCNT_TXAE	0x0001	/* Transmitter Available Interrupt Enable */
+#define USTCNT_TXHE	0x0002	/* Transmitter Half Empty Enable */
+#define USTCNT_TXEE	0x0004	/* Transmitter Empty Interrupt Enable */
+#define USTCNT_RXRE	0x0008	/* Receiver Ready Interrupt Enable */
+#define USTCNT_RXHE	0x0010	/* Receiver Half-Full Interrupt Enable */
+#define USTCNT_RXFE	0x0020	/* Receiver Full Interrupt Enable */
+#define USTCNT_CTSD	0x0040	/* CTS Delta Interrupt Enable */
+#define USTCNT_ODEN	0x0080	/* Old Data Interrupt Enable */
+#define USTCNT_8_7	0x0100	/* Eight or seven-bit transmission */
+#define USTCNT_STOP	0x0200	/* Stop bit transmission */
+#define USTCNT_ODD	0x0400	/* Odd Parity */
+#define	USTCNT_PEN	0x0800	/* Parity Enable */
+#define USTCNT_CLKM	0x1000	/* Clock Mode Select */
+#define	USTCNT_TXEN	0x2000	/* Transmitter Enable */
+#define USTCNT_RXEN	0x4000	/* Receiver Enable */
+#define USTCNT_UEN	0x8000	/* UART Enable */
+
+/* '328-compatible definitions */
+#define USTCNT_TXAVAILEN	USTCNT_TXAE
+#define USTCNT_TXHALFEN		USTCNT_TXHE
+#define USTCNT_TXEMPTYEN	USTCNT_TXEE
+#define USTCNT_RXREADYEN	USTCNT_RXRE
+#define USTCNT_RXHALFEN		USTCNT_RXHE
+#define USTCNT_RXFULLEN		USTCNT_RXFE
+#define USTCNT_CTSDELTAEN	USTCNT_CTSD
+#define USTCNT_ODD_EVEN		USTCNT_ODD
+#define USTCNT_PARITYEN		USTCNT_PEN
+#define USTCNT_CLKMODE		USTCNT_CLKM
+#define USTCNT_UARTEN		USTCNT_UEN
+
+/*
+ * UART Baud Control Register
+ */
+#define UBAUD_ADDR	0xfffff902
+#define UBAUD		WORD_REF(UBAUD_ADDR)
+
+#define UBAUD_PRESCALER_MASK	0x003f	/* Actual divisor is 65 - PRESCALER */
+#define UBAUD_PRESCALER_SHIFT	0
+#define UBAUD_DIVIDE_MASK	0x0700	/* Baud Rate freq. divizor */
+#define UBAUD_DIVIDE_SHIFT	8
+#define UBAUD_BAUD_SRC		0x0800	/* Baud Rate Source */
+#define UBAUD_UCLKDIR		0x2000	/* UCLK Direction */
+
+/*
+ * UART Receiver Register 
+ */
+#define URX_ADDR	0xfffff904
+#define URX		WORD_REF(URX_ADDR)
+
+#define URX_RXDATA_ADDR	0xfffff905
+#define URX_RXDATA	BYTE_REF(URX_RXDATA_ADDR)
+
+#define URX_RXDATA_MASK	 0x00ff	/* Received data */
+#define URX_RXDATA_SHIFT 0
+#define URX_PARITY_ERROR 0x0100	/* Parity Error */
+#define URX_BREAK	 0x0200	/* Break Detected */
+#define URX_FRAME_ERROR	 0x0400	/* Framing Error */
+#define URX_OVRUN	 0x0800	/* Serial Overrun */
+#define URX_OLD_DATA	 0x1000	/* Old data in FIFO */
+#define URX_DATA_READY	 0x2000	/* Data Ready (FIFO not empty) */
+#define URX_FIFO_HALF	 0x4000 /* FIFO is Half-Full */
+#define URX_FIFO_FULL	 0x8000	/* FIFO is Full */
+
+/*
+ * UART Transmitter Register 
+ */
+#define UTX_ADDR	0xfffff906
+#define UTX		WORD_REF(UTX_ADDR)
+
+#define UTX_TXDATA_ADDR	0xfffff907
+#define UTX_TXDATA	BYTE_REF(UTX_TXDATA_ADDR)
+
+#define UTX_TXDATA_MASK	 0x00ff	/* Data to be transmitted */
+#define UTX_TXDATA_SHIFT 0
+#define UTX_CTS_DELTA	 0x0100	/* CTS changed */
+#define UTX_CTS_STAT	 0x0200	/* CTS State */
+#define	UTX_BUSY	 0x0400	/* FIFO is busy, sending a character */
+#define	UTX_NOCTS	 0x0800	/* Ignore CTS */
+#define UTX_SEND_BREAK	 0x1000	/* Send a BREAK */
+#define UTX_TX_AVAIL	 0x2000	/* Transmit FIFO has a slot available */
+#define UTX_FIFO_HALF	 0x4000	/* Transmit FIFO is half empty */
+#define UTX_FIFO_EMPTY	 0x8000	/* Transmit FIFO is empty */
+
+/* '328-compatible definitions */
+#define UTX_CTS_STATUS	UTX_CTS_STAT
+#define UTX_IGNORE_CTS	UTX_NOCTS
+
+/*
+ * UART Miscellaneous Register 
+ */
+#define UMISC_ADDR	0xfffff908
+#define UMISC		WORD_REF(UMISC_ADDR)
+
+#define UMISC_TX_POL	 0x0004	/* Transmit Polarity */
+#define UMISC_RX_POL	 0x0008	/* Receive Polarity */
+#define UMISC_IRDA_LOOP	 0x0010	/* IrDA Loopback Enable */
+#define UMISC_IRDA_EN	 0x0020	/* Infra-Red Enable */
+#define UMISC_RTS	 0x0040	/* Set RTS status */
+#define UMISC_RTSCONT	 0x0080	/* Choose RTS control */
+#define UMISC_IR_TEST	 0x0400	/* IRDA Test Enable */
+#define UMISC_BAUD_RESET 0x0800	/* Reset Baud Rate Generation Counters */
+#define UMISC_LOOP	 0x1000	/* Serial Loopback Enable */
+#define UMISC_FORCE_PERR 0x2000	/* Force Parity Error */
+#define UMISC_CLKSRC	 0x4000	/* Clock Source */
+#define UMISC_BAUD_TEST	 0x8000	/* Enable Baud Test Mode */
+
+/* 
+ * UART Non-integer Prescaler Register
+ */
+#define NIPR_ADDR	0xfffff90a
+#define NIPR		WORD_REF(NIPR_ADDR)
+
+#define NIPR_STEP_VALUE_MASK	0x00ff	/* NI prescaler step value */
+#define NIPR_STEP_VALUE_SHIFT	0
+#define NIPR_SELECT_MASK	0x0700	/* Tap Selection */
+#define NIPR_SELECT_SHIFT	8
+#define NIPR_PRE_SEL		0x8000	/* Non-integer prescaler select */
+
+
+/* generalization of uart control registers to support multiple ports: */
+typedef struct {
+  volatile unsigned short int ustcnt;
+  volatile unsigned short int ubaud;
+  union {
+    volatile unsigned short int w;
+    struct {
+      volatile unsigned char status;
+      volatile unsigned char rxdata;
+    } b;
+  } urx;
+  union {
+    volatile unsigned short int w;
+    struct {
+      volatile unsigned char status;
+      volatile unsigned char txdata;
+    } b;
+  } utx;
+  volatile unsigned short int umisc;
+  volatile unsigned short int nipr;
+  volatile unsigned short int hmark;
+  volatile unsigned short int unused;
+} __attribute__((packed)) m68328_uart;
+
+
+
+
+/**********
+ *
+ * 0xFFFFFAxx -- LCD Controller
+ *
+ **********/
+
+/*
+ * LCD Screen Starting Address Register 
+ */
+#define LSSA_ADDR	0xfffffa00
+#define LSSA		LONG_REF(LSSA_ADDR)
+
+#define LSSA_SSA_MASK	0x1ffffffe	/* Bits 0 and 29-31 are reserved */
+
+/*
+ * LCD Virtual Page Width Register 
+ */
+#define LVPW_ADDR	0xfffffa05
+#define LVPW		BYTE_REF(LVPW_ADDR)
+
+/*
+ * LCD Screen Width Register (not compatible with '328 !!!) 
+ */
+#define LXMAX_ADDR	0xfffffa08
+#define LXMAX		WORD_REF(LXMAX_ADDR)
+
+#define LXMAX_XM_MASK	0x02f0		/* Bits 0-3 and 10-15 are reserved */
+
+/*
+ * LCD Screen Height Register
+ */
+#define LYMAX_ADDR	0xfffffa0a
+#define LYMAX		WORD_REF(LYMAX_ADDR)
+
+#define LYMAX_YM_MASK	0x01ff		/* Bits 9-15 are reserved */
+
+/*
+ * LCD Cursor X Position Register
+ */
+#define LCXP_ADDR	0xfffffa18
+#define LCXP		WORD_REF(LCXP_ADDR)
+
+#define LCXP_CC_MASK	0xc000		/* Cursor Control */
+#define   LCXP_CC_TRAMSPARENT	0x0000
+#define   LCXP_CC_BLACK		0x4000
+#define   LCXP_CC_REVERSED	0x8000
+#define   LCXP_CC_WHITE		0xc000
+#define LCXP_CXP_MASK	0x02ff		/* Cursor X position */
+
+/*
+ * LCD Cursor Y Position Register
+ */
+#define LCYP_ADDR	0xfffffa1a
+#define LCYP		WORD_REF(LCYP_ADDR)
+
+#define LCYP_CYP_MASK	0x01ff		/* Cursor Y Position */
+
+/*
+ * LCD Cursor Width and Heigth Register
+ */
+#define LCWCH_ADDR	0xfffffa1c
+#define LCWCH		WORD_REF(LCWCH_ADDR)
+
+#define LCWCH_CH_MASK	0x001f		/* Cursor Height */
+#define LCWCH_CH_SHIFT	0
+#define LCWCH_CW_MASK	0x1f00		/* Cursor Width */
+#define LCWCH_CW_SHIFT	8
+
+/*
+ * LCD Blink Control Register
+ */
+#define LBLKC_ADDR	0xfffffa1f
+#define LBLKC		BYTE_REF(LBLKC_ADDR)
+
+#define LBLKC_BD_MASK	0x7f	/* Blink Divisor */
+#define LBLKC_BD_SHIFT	0
+#define LBLKC_BKEN	0x80	/* Blink Enabled */
+
+/*
+ * LCD Panel Interface Configuration Register 
+ */
+#define LPICF_ADDR	0xfffffa20
+#define LPICF		BYTE_REF(LPICF_ADDR)
+
+#define LPICF_GS_MASK	 0x03	 /* Gray-Scale Mode */
+#define	  LPICF_GS_BW	   0x00
+#define   LPICF_GS_GRAY_4  0x01
+#define   LPICF_GS_GRAY_16 0x02
+#define LPICF_PBSIZ_MASK 0x0c	/* Panel Bus Width */
+#define   LPICF_PBSIZ_1	   0x00
+#define   LPICF_PBSIZ_2    0x04
+#define   LPICF_PBSIZ_4    0x08
+
+/*
+ * LCD Polarity Configuration Register 
+ */
+#define LPOLCF_ADDR	0xfffffa21
+#define LPOLCF		BYTE_REF(LPOLCF_ADDR)
+
+#define LPOLCF_PIXPOL	0x01	/* Pixel Polarity */
+#define LPOLCF_LPPOL	0x02	/* Line Pulse Polarity */
+#define LPOLCF_FLMPOL	0x04	/* Frame Marker Polarity */
+#define LPOLCF_LCKPOL	0x08	/* LCD Shift Lock Polarity */
+
+/*
+ * LACD (LCD Alternate Crystal Direction) Rate Control Register
+ */
+#define LACDRC_ADDR	0xfffffa23
+#define LACDRC		BYTE_REF(LACDRC_ADDR)
+
+#define LACDRC_ACDSLT	 0x80	/* Signal Source Select */
+#define LACDRC_ACD_MASK	 0x0f	/* Alternate Crystal Direction Control */
+#define LACDRC_ACD_SHIFT 0
+
+/*
+ * LCD Pixel Clock Divider Register
+ */
+#define LPXCD_ADDR	0xfffffa25
+#define LPXCD		BYTE_REF(LPXCD_ADDR)
+
+#define	LPXCD_PCD_MASK	0x3f 	/* Pixel Clock Divider */
+#define LPXCD_PCD_SHIFT	0
+
+/*
+ * LCD Clocking Control Register
+ */
+#define LCKCON_ADDR	0xfffffa27
+#define LCKCON		BYTE_REF(LCKCON_ADDR)
+
+#define LCKCON_DWS_MASK	 0x0f	/* Display Wait-State */
+#define LCKCON_DWS_SHIFT 0
+#define LCKCON_DWIDTH	 0x40	/* Display Memory Width  */
+#define LCKCON_LCDON	 0x80	/* Enable LCD Controller */
+
+/* '328-compatible definitions */
+#define LCKCON_DW_MASK  LCKCON_DWS_MASK
+#define LCKCON_DW_SHIFT LCKCON_DWS_SHIFT
+ 
+/*
+ * LCD Refresh Rate Adjustment Register 
+ */
+#define LRRA_ADDR	0xfffffa29
+#define LRRA		BYTE_REF(LRRA_ADDR)
+
+/*
+ * LCD Panning Offset Register
+ */
+#define LPOSR_ADDR	0xfffffa2d
+#define LPOSR		BYTE_REF(LPOSR_ADDR)
+
+#define LPOSR_POS_MASK	0x0f	/* Pixel Offset Code */
+#define LPOSR_POS_SHIFT	0
+
+/*
+ * LCD Frame Rate Control Modulation Register
+ */
+#define LFRCM_ADDR	0xfffffa31
+#define LFRCM		BYTE_REF(LFRCM_ADDR)
+
+#define LFRCM_YMOD_MASK	 0x0f	/* Vertical Modulation */
+#define LFRCM_YMOD_SHIFT 0
+#define LFRCM_XMOD_MASK	 0xf0	/* Horizontal Modulation */
+#define LFRCM_XMOD_SHIFT 4
+
+/*
+ * LCD Gray Palette Mapping Register
+ */
+#define LGPMR_ADDR	0xfffffa33
+#define LGPMR		BYTE_REF(LGPMR_ADDR)
+
+#define LGPMR_G1_MASK	0x0f
+#define LGPMR_G1_SHIFT	0
+#define LGPMR_G2_MASK	0xf0
+#define LGPMR_G2_SHIFT	4
+
+/* 
+ * PWM Contrast Control Register
+ */
+#define PWMR_ADDR	0xfffffa36
+#define PWMR		WORD_REF(PWMR_ADDR)
+
+#define PWMR_PW_MASK	0x00ff	/* Pulse Width */
+#define PWMR_PW_SHIFT	0
+#define PWMR_CCPEN	0x0100	/* Contrast Control Enable */
+#define PWMR_SRC_MASK	0x0600	/* Input Clock Source */
+#define   PWMR_SRC_LINE	  0x0000	/* Line Pulse  */
+#define   PWMR_SRC_PIXEL  0x0200	/* Pixel Clock */
+#define   PWMR_SRC_LCD    0x4000	/* LCD clock   */
+
+/**********
+ *
+ * 0xFFFFFBxx -- Real-Time Clock (RTC)
+ *
+ **********/
+
+/*
+ * RTC Hours Minutes and Seconds Register
+ */
+#define RTCTIME_ADDR	0xfffffb00
+#define RTCTIME		LONG_REF(RTCTIME_ADDR)
+
+#define RTCTIME_SECONDS_MASK	0x0000003f	/* Seconds */
+#define RTCTIME_SECONDS_SHIFT	0
+#define RTCTIME_MINUTES_MASK	0x003f0000	/* Minutes */
+#define RTCTIME_MINUTES_SHIFT	16
+#define RTCTIME_HOURS_MASK	0x1f000000	/* Hours */
+#define RTCTIME_HOURS_SHIFT	24
+
+/*
+ *  RTC Alarm Register 
+ */
+#define RTCALRM_ADDR    0xfffffb04
+#define RTCALRM         LONG_REF(RTCALRM_ADDR)
+
+#define RTCALRM_SECONDS_MASK    0x0000003f      /* Seconds */
+#define RTCALRM_SECONDS_SHIFT   0
+#define RTCALRM_MINUTES_MASK    0x003f0000      /* Minutes */
+#define RTCALRM_MINUTES_SHIFT   16
+#define RTCALRM_HOURS_MASK      0x1f000000      /* Hours */
+#define RTCALRM_HOURS_SHIFT     24
+
+/*
+ * Watchdog Timer Register 
+ */
+#define WATCHDOG_ADDR	0xfffffb0a
+#define WATCHDOG	WORD_REF(WATCHDOG_ADDR)
+
+#define WATCHDOG_EN	0x0001	/* Watchdog Enabled */
+#define WATCHDOG_ISEL	0x0002	/* Select the watchdog interrupt */
+#define WATCHDOG_INTF	0x0080	/* Watchdog interrupt occcured */
+#define WATCHDOG_CNT_MASK  0x0300	/* Watchdog Counter */
+#define WATCHDOG_CNT_SHIFT 8
+
+/*
+ * RTC Control Register
+ */
+#define RTCCTL_ADDR	0xfffffb0c
+#define RTCCTL		WORD_REF(RTCCTL_ADDR)
+
+#define RTCCTL_XTL	0x0020	/* Crystal Selection */
+#define RTCCTL_EN	0x0080	/* RTC Enable */
+
+/* '328-compatible definitions */
+#define RTCCTL_384	RTCCTL_XTL
+#define RTCCTL_ENABLE	RTCCTL_EN
+
+/*
+ * RTC Interrupt Status Register 
+ */
+#define RTCISR_ADDR	0xfffffb0e
+#define RTCISR		WORD_REF(RTCISR_ADDR)
+
+#define RTCISR_SW	0x0001	/* Stopwatch timed out */
+#define RTCISR_MIN	0x0002	/* 1-minute interrupt has occurred */
+#define RTCISR_ALM	0x0004	/* Alarm interrupt has occurred */
+#define RTCISR_DAY	0x0008	/* 24-hour rollover interrupt has occurred */
+#define RTCISR_1HZ	0x0010	/* 1Hz interrupt has occurred */
+#define RTCISR_HR	0x0020	/* 1-hour interrupt has occurred */
+#define RTCISR_SAM0	0x0100	/*   4Hz /   4.6875Hz interrupt has occurred */ 
+#define RTCISR_SAM1	0x0200	/*   8Hz /   9.3750Hz interrupt has occurred */ 
+#define RTCISR_SAM2	0x0400	/*  16Hz /  18.7500Hz interrupt has occurred */ 
+#define RTCISR_SAM3	0x0800	/*  32Hz /  37.5000Hz interrupt has occurred */ 
+#define RTCISR_SAM4	0x1000	/*  64Hz /  75.0000Hz interrupt has occurred */ 
+#define RTCISR_SAM5	0x2000	/* 128Hz / 150.0000Hz interrupt has occurred */ 
+#define RTCISR_SAM6	0x4000	/* 256Hz / 300.0000Hz interrupt has occurred */ 
+#define RTCISR_SAM7	0x8000	/* 512Hz / 600.0000Hz interrupt has occurred */ 
+
+/*
+ * RTC Interrupt Enable Register
+ */
+#define RTCIENR_ADDR	0xfffffb10
+#define RTCIENR		WORD_REF(RTCIENR_ADDR)
+
+#define RTCIENR_SW	0x0001	/* Stopwatch interrupt enable */
+#define RTCIENR_MIN	0x0002	/* 1-minute interrupt enable */
+#define RTCIENR_ALM	0x0004	/* Alarm interrupt enable */
+#define RTCIENR_DAY	0x0008	/* 24-hour rollover interrupt enable */
+#define RTCIENR_1HZ	0x0010	/* 1Hz interrupt enable */
+#define RTCIENR_HR	0x0020	/* 1-hour interrupt enable */
+#define RTCIENR_SAM0	0x0100	/*   4Hz /   4.6875Hz interrupt enable */ 
+#define RTCIENR_SAM1	0x0200	/*   8Hz /   9.3750Hz interrupt enable */ 
+#define RTCIENR_SAM2	0x0400	/*  16Hz /  18.7500Hz interrupt enable */ 
+#define RTCIENR_SAM3	0x0800	/*  32Hz /  37.5000Hz interrupt enable */ 
+#define RTCIENR_SAM4	0x1000	/*  64Hz /  75.0000Hz interrupt enable */ 
+#define RTCIENR_SAM5	0x2000	/* 128Hz / 150.0000Hz interrupt enable */ 
+#define RTCIENR_SAM6	0x4000	/* 256Hz / 300.0000Hz interrupt enable */ 
+#define RTCIENR_SAM7	0x8000	/* 512Hz / 600.0000Hz interrupt enable */ 
+
+/* 
+ * Stopwatch Minutes Register
+ */
+#define STPWCH_ADDR	0xfffffb12
+#define STPWCH		WORD_REF(STPWCH_ADDR)
+
+#define STPWCH_CNT_MASK	 0x003f	/* Stopwatch countdown value */
+#define SPTWCH_CNT_SHIFT 0
+
+/*
+ * RTC Day Count Register 
+ */
+#define DAYR_ADDR	0xfffffb1a
+#define DAYR		WORD_REF(DAYR_ADDR)
+
+#define DAYR_DAYS_MASK	0x1ff	/* Day Setting */
+#define DAYR_DAYS_SHIFT 0
+
+/*
+ * RTC Day Alarm Register 
+ */
+#define DAYALARM_ADDR	0xfffffb1c
+#define DAYALARM	WORD_REF(DAYALARM_ADDR)
+
+#define DAYALARM_DAYSAL_MASK	0x01ff	/* Day Setting of the Alarm */
+#define DAYALARM_DAYSAL_SHIFT 	0
+
+/**********
+ *
+ * 0xFFFFFCxx -- DRAM Controller
+ *
+ **********/
+
+/*
+ * DRAM Memory Configuration Register 
+ */
+#define DRAMMC_ADDR	0xfffffc00
+#define DRAMMC		WORD_REF(DRAMMC_ADDR)
+
+#define DRAMMC_ROW12_MASK	0xc000	/* Row address bit for MD12 */
+#define   DRAMMC_ROW12_PA10	0x0000
+#define   DRAMMC_ROW12_PA21	0x4000	
+#define   DRAMMC_ROW12_PA23	0x8000
+#define	DRAMMC_ROW0_MASK	0x3000	/* Row address bit for MD0 */
+#define	  DRAMMC_ROW0_PA11	0x0000
+#define   DRAMMC_ROW0_PA22	0x1000
+#define   DRAMMC_ROW0_PA23	0x2000
+#define DRAMMC_ROW11		0x0800	/* Row address bit for MD11 PA20/PA22 */
+#define DRAMMC_ROW10		0x0400	/* Row address bit for MD10 PA19/PA21 */
+#define	DRAMMC_ROW9		0x0200	/* Row address bit for MD9  PA9/PA19  */
+#define DRAMMC_ROW8		0x0100	/* Row address bit for MD8  PA10/PA20 */
+#define DRAMMC_COL10		0x0080	/* Col address bit for MD10 PA11/PA0  */
+#define DRAMMC_COL9		0x0040	/* Col address bit for MD9  PA10/PA0  */
+#define DRAMMC_COL8		0x0020	/* Col address bit for MD8  PA9/PA0   */
+#define DRAMMC_REF_MASK		0x001f	/* Reresh Cycle */
+#define DRAMMC_REF_SHIFT	0
+
+/*
+ * DRAM Control Register
+ */
+#define DRAMC_ADDR	0xfffffc02
+#define DRAMC		WORD_REF(DRAMC_ADDR)
+
+#define DRAMC_DWE	   0x0001	/* DRAM Write Enable */
+#define DRAMC_RST	   0x0002	/* Reset Burst Refresh Enable */
+#define DRAMC_LPR	   0x0004	/* Low-Power Refresh Enable */
+#define DRAMC_SLW	   0x0008	/* Slow RAM */
+#define DRAMC_LSP	   0x0010	/* Light Sleep */
+#define DRAMC_MSW	   0x0020	/* Slow Multiplexing */
+#define DRAMC_WS_MASK	   0x00c0	/* Wait-states */
+#define DRAMC_WS_SHIFT	   6
+#define DRAMC_PGSZ_MASK    0x0300	/* Page Size for fast page mode */
+#define DRAMC_PGSZ_SHIFT   8
+#define   DRAMC_PGSZ_256K  0x0000	
+#define   DRAMC_PGSZ_512K  0x0100
+#define   DRAMC_PGSZ_1024K 0x0200
+#define	  DRAMC_PGSZ_2048K 0x0300
+#define DRAMC_EDO	   0x0400	/* EDO DRAM */
+#define DRAMC_CLK	   0x0800	/* Refresh Timer Clock source select */
+#define DRAMC_BC_MASK	   0x3000	/* Page Access Clock Cycle (FP mode) */
+#define DRAMC_BC_SHIFT	   12
+#define DRAMC_RM	   0x4000	/* Refresh Mode */
+#define DRAMC_EN	   0x8000	/* DRAM Controller enable */
+
+
+/**********
+ *
+ * 0xFFFFFDxx -- In-Circuit Emulation (ICE)
+ *
+ **********/
+
+/*
+ * ICE Module Address Compare Register
+ */
+#define ICEMACR_ADDR	0xfffffd00
+#define ICEMACR		LONG_REF(ICEMACR_ADDR)
+
+/*
+ * ICE Module Address Mask Register
+ */
+#define ICEMAMR_ADDR	0xfffffd04
+#define ICEMAMR		LONG_REF(ICEMAMR_ADDR)
+
+/*
+ * ICE Module Control Compare Register
+ */
+#define ICEMCCR_ADDR	0xfffffd08
+#define ICEMCCR		WORD_REF(ICEMCCR_ADDR)
+
+#define ICEMCCR_PD	0x0001	/* Program/Data Cycle Selection */
+#define ICEMCCR_RW	0x0002	/* Read/Write Cycle Selection */
+
+/*
+ * ICE Module Control Mask Register
+ */
+#define ICEMCMR_ADDR	0xfffffd0a
+#define ICEMCMR		WORD_REF(ICEMCMR_ADDR)
+
+#define ICEMCMR_PDM	0x0001	/* Program/Data Cycle Mask */
+#define ICEMCMR_RWM	0x0002	/* Read/Write Cycle Mask */
+
+/*
+ * ICE Module Control Register 
+ */
+#define ICEMCR_ADDR	0xfffffd0c
+#define ICEMCR		WORD_REF(ICEMCR_ADDR)
+
+#define ICEMCR_CEN	0x0001	/* Compare Enable */
+#define ICEMCR_PBEN	0x0002	/* Program Break Enable */
+#define ICEMCR_SB	0x0004	/* Single Breakpoint */
+#define ICEMCR_HMDIS	0x0008	/* HardMap disable */
+#define ICEMCR_BBIEN	0x0010	/* Bus Break Interrupt Enable */
+
+/*
+ * ICE Module Status Register 
+ */
+#define ICEMSR_ADDR	0xfffffd0e
+#define ICEMSR		WORD_REF(ICEMSR_ADDR)
+
+#define ICEMSR_EMUEN	0x0001	/* Emulation Enable */
+#define ICEMSR_BRKIRQ	0x0002	/* A-Line Vector Fetch Detected */
+#define ICEMSR_BBIRQ	0x0004	/* Bus Break Interrupt Detected */
+#define ICEMSR_EMIRQ	0x0008	/* EMUIRQ Falling Edge Detected */
+
+#endif /* _MC68VZ328_H_ */
diff --git a/arch/m68knommu/include/asm/a.out.h b/arch/m68knommu/include/asm/a.out.h
new file mode 100644
index 00000000000..ce18ef99de0
--- /dev/null
+++ b/arch/m68knommu/include/asm/a.out.h
@@ -0,0 +1 @@
+#include <asm-m68k/a.out.h>
diff --git a/arch/m68knommu/include/asm/anchor.h b/arch/m68knommu/include/asm/anchor.h
new file mode 100644
index 00000000000..871c0d5cfc3
--- /dev/null
+++ b/arch/m68knommu/include/asm/anchor.h
@@ -0,0 +1,112 @@
+/****************************************************************************/
+
+/*
+ *	anchor.h -- Anchor CO-MEM Lite PCI host bridge part.
+ *
+ *	(C) Copyright 2000, Moreton Bay (www.moreton.com.au)
+ */
+
+/****************************************************************************/
+#ifndef	anchor_h
+#define	anchor_h
+/****************************************************************************/
+
+/*
+ *	Define basic addressing info.
+ */
+#if defined(CONFIG_M5407C3)
+#define	COMEM_BASE	0xFFFF0000	/* Base of CO-MEM address space */
+#define	COMEM_IRQ	25		/* IRQ of anchor part */
+#else
+#define	COMEM_BASE	0x80000000	/* Base of CO-MEM address space */
+#define	COMEM_IRQ	25		/* IRQ of anchor part */
+#endif
+
+/****************************************************************************/
+
+/*
+ *	4-byte registers of CO-MEM, so adjust register addresses for
+ *	easy access. Handy macro for word access too.
+ */
+#define	LREG(a)		((a) >> 2)
+#define	WREG(a)		((a) >> 1)
+
+
+/*
+ *	Define base addresses within CO-MEM Lite register address space.
+ */
+#define	COMEM_I2O	0x0000		/* I2O registers */
+#define	COMEM_OPREGS	0x0400		/* Operation registers */
+#define	COMEM_PCIBUS	0x2000		/* Direct access to PCI bus */
+#define	COMEM_SHMEM	0x4000		/* Shared memory region */
+
+#define	COMEM_SHMEMSIZE	0x4000		/* Size of shared memory */
+
+
+/*
+ *	Define CO-MEM Registers.
+ */
+#define	COMEM_I2OHISR	0x0030		/* I2O host interrupt status */
+#define	COMEM_I2OHIMR	0x0034		/* I2O host interrupt mask */
+#define	COMEM_I2OLISR	0x0038		/* I2O local interrupt status */
+#define	COMEM_I2OLIMR	0x003c		/* I2O local interrupt mask */
+#define	COMEM_IBFPFIFO	0x0040		/* I2O inbound free/post FIFO */
+#define	COMEM_OBPFFIFO	0x0044		/* I2O outbound post/free FIFO */
+#define	COMEM_IBPFFIFO	0x0048		/* I2O inbound post/free FIFO */
+#define	COMEM_OBFPFIFO	0x004c		/* I2O outbound free/post FIFO */
+
+#define	COMEM_DAHBASE	0x0460		/* Direct access base address */
+
+#define	COMEM_NVCMD	0x04a0		/* I2C serial command */
+#define	COMEM_NVREAD	0x04a4		/* I2C serial read */
+#define	COMEM_NVSTAT	0x04a8		/* I2C status */
+
+#define	COMEM_DMALBASE	0x04b0		/* DMA local base address */
+#define	COMEM_DMAHBASE	0x04b4		/* DMA host base address */
+#define	COMEM_DMASIZE	0x04b8		/* DMA size */
+#define	COMEM_DMACTL	0x04bc		/* DMA control */
+
+#define	COMEM_HCTL	0x04e0		/* Host control */
+#define	COMEM_HINT	0x04e4		/* Host interrupt control/status */
+#define	COMEM_HLDATA	0x04e8		/* Host to local data mailbox */
+#define	COMEM_LINT	0x04f4		/* Local interrupt contole status */
+#define	COMEM_LHDATA	0x04f8		/* Local to host data mailbox */
+
+#define	COMEM_LBUSCFG	0x04fc		/* Local bus configuration */
+
+
+/*
+ *	Commands and flags for use with Direct Access Register.
+ */
+#define	COMEM_DA_IACK	0x00000000	/* Interrupt acknowledge (read) */
+#define	COMEM_DA_SPCL	0x00000010	/* Special cycle (write) */
+#define	COMEM_DA_MEMRD	0x00000004	/* Memory read cycle */
+#define	COMEM_DA_MEMWR	0x00000004	/* Memory write cycle */
+#define	COMEM_DA_IORD	0x00000002	/* I/O read cycle */
+#define	COMEM_DA_IOWR	0x00000002	/* I/O write cycle */
+#define	COMEM_DA_CFGRD	0x00000006	/* Configuration read cycle */
+#define	COMEM_DA_CFGWR	0x00000006	/* Configuration write cycle */
+
+#define	COMEM_DA_ADDR(a)	((a) & 0xffffe000)
+
+#define	COMEM_DA_OFFSET(a)	((a) & 0x00001fff)
+
+
+/*
+ *	The PCI bus will be limited in what slots will actually be used.
+ *	Define valid device numbers for different boards.
+ */
+#if defined(CONFIG_M5407C3)
+#define	COMEM_MINDEV	14		/* Minimum valid DEVICE */
+#define	COMEM_MAXDEV	14		/* Maximum valid DEVICE */
+#define	COMEM_BRIDGEDEV	15		/* Slot bridge is in */
+#else
+#define	COMEM_MINDEV	0		/* Minimum valid DEVICE */
+#define	COMEM_MAXDEV	3		/* Maximum valid DEVICE */
+#endif
+
+#define	COMEM_MAXPCI	(COMEM_MAXDEV+1)	/* Maximum PCI devices */
+
+
+/****************************************************************************/
+#endif	/* anchor_h */
diff --git a/arch/m68knommu/include/asm/atomic.h b/arch/m68knommu/include/asm/atomic.h
new file mode 100644
index 00000000000..d5632a305da
--- /dev/null
+++ b/arch/m68knommu/include/asm/atomic.h
@@ -0,0 +1,155 @@
+#ifndef __ARCH_M68KNOMMU_ATOMIC__
+#define __ARCH_M68KNOMMU_ATOMIC__
+
+#include <asm/system.h>
+
+/*
+ * Atomic operations that C can't guarantee us.  Useful for
+ * resource counting etc..
+ */
+
+/*
+ * We do not have SMP m68k systems, so we don't have to deal with that.
+ */
+
+typedef struct { int counter; } atomic_t;
+#define ATOMIC_INIT(i)	{ (i) }
+
+#define atomic_read(v)		((v)->counter)
+#define atomic_set(v, i)	(((v)->counter) = i)
+
+static __inline__ void atomic_add(int i, atomic_t *v)
+{
+#ifdef CONFIG_COLDFIRE
+	__asm__ __volatile__("addl %1,%0" : "+m" (*v) : "d" (i));
+#else
+	__asm__ __volatile__("addl %1,%0" : "+m" (*v) : "di" (i));
+#endif
+}
+
+static __inline__ void atomic_sub(int i, atomic_t *v)
+{
+#ifdef CONFIG_COLDFIRE
+	__asm__ __volatile__("subl %1,%0" : "+m" (*v) : "d" (i));
+#else
+	__asm__ __volatile__("subl %1,%0" : "+m" (*v) : "di" (i));
+#endif
+}
+
+static __inline__ int atomic_sub_and_test(int i, atomic_t * v)
+{
+	char c;
+#ifdef CONFIG_COLDFIRE
+	__asm__ __volatile__("subl %2,%1; seq %0"
+			     : "=d" (c), "+m" (*v)
+			     : "d" (i));
+#else
+	__asm__ __volatile__("subl %2,%1; seq %0"
+			     : "=d" (c), "+m" (*v)
+			     : "di" (i));
+#endif
+	return c != 0;
+}
+
+static __inline__ void atomic_inc(volatile atomic_t *v)
+{
+	__asm__ __volatile__("addql #1,%0" : "+m" (*v));
+}
+
+/*
+ * atomic_inc_and_test - increment and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+
+static __inline__ int atomic_inc_and_test(volatile atomic_t *v)
+{
+	char c;
+	__asm__ __volatile__("addql #1,%1; seq %0" : "=d" (c), "+m" (*v));
+	return c != 0;
+}
+
+static __inline__ void atomic_dec(volatile atomic_t *v)
+{
+	__asm__ __volatile__("subql #1,%0" : "+m" (*v));
+}
+
+static __inline__ int atomic_dec_and_test(volatile atomic_t *v)
+{
+	char c;
+	__asm__ __volatile__("subql #1,%1; seq %0" : "=d" (c), "+m" (*v));
+	return c != 0;
+}
+
+static __inline__ void atomic_clear_mask(unsigned long mask, unsigned long *v)
+{
+	__asm__ __volatile__("andl %1,%0" : "+m" (*v) : "id" (~(mask)));
+}
+
+static __inline__ void atomic_set_mask(unsigned long mask, unsigned long *v)
+{
+	__asm__ __volatile__("orl %1,%0" : "+m" (*v) : "id" (mask));
+}
+
+/* Atomic operations are already serializing */
+#define smp_mb__before_atomic_dec()    barrier()
+#define smp_mb__after_atomic_dec() barrier()
+#define smp_mb__before_atomic_inc()    barrier()
+#define smp_mb__after_atomic_inc() barrier()
+
+static inline int atomic_add_return(int i, atomic_t * v)
+{
+	unsigned long temp, flags;
+
+	local_irq_save(flags);
+	temp = *(long *)v;
+	temp += i;
+	*(long *)v = temp;
+	local_irq_restore(flags);
+
+	return temp;
+}
+
+#define atomic_add_negative(a, v)	(atomic_add_return((a), (v)) < 0)
+
+static inline int atomic_sub_return(int i, atomic_t * v)
+{
+	unsigned long temp, flags;
+
+	local_irq_save(flags);
+	temp = *(long *)v;
+	temp -= i;
+	*(long *)v = temp;
+	local_irq_restore(flags);
+
+	return temp;
+}
+
+#define atomic_cmpxchg(v, o, n) ((int)cmpxchg(&((v)->counter), (o), (n)))
+#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
+
+static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
+{
+	int c, old;
+	c = atomic_read(v);
+	for (;;) {
+		if (unlikely(c == (u)))
+			break;
+		old = atomic_cmpxchg((v), c, c + (a));
+		if (likely(old == c))
+			break;
+		c = old;
+	}
+	return c != (u);
+}
+
+#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
+
+#define atomic_dec_return(v) atomic_sub_return(1,(v))
+#define atomic_inc_return(v) atomic_add_return(1,(v))
+
+#include <asm-generic/atomic.h>
+#endif /* __ARCH_M68KNOMMU_ATOMIC __ */
diff --git a/arch/m68knommu/include/asm/auxvec.h b/arch/m68knommu/include/asm/auxvec.h
new file mode 100644
index 00000000000..844d6d52204
--- /dev/null
+++ b/arch/m68knommu/include/asm/auxvec.h
@@ -0,0 +1,4 @@
+#ifndef __ASMm68k_AUXVEC_H
+#define __ASMm68k_AUXVEC_H
+
+#endif
diff --git a/arch/m68knommu/include/asm/bitops.h b/arch/m68knommu/include/asm/bitops.h
new file mode 100644
index 00000000000..6f3685eab44
--- /dev/null
+++ b/arch/m68knommu/include/asm/bitops.h
@@ -0,0 +1,336 @@
+#ifndef _M68KNOMMU_BITOPS_H
+#define _M68KNOMMU_BITOPS_H
+
+/*
+ * Copyright 1992, Linus Torvalds.
+ */
+
+#include <linux/compiler.h>
+#include <asm/byteorder.h>	/* swab32 */
+
+#ifdef __KERNEL__
+
+#ifndef _LINUX_BITOPS_H
+#error only <linux/bitops.h> can be included directly
+#endif
+
+#if defined (__mcfisaaplus__) || defined (__mcfisac__)
+static inline int ffs(unsigned int val)
+{
+        if (!val)
+                return 0;
+
+        asm volatile(
+                        "bitrev %0\n\t"
+                        "ff1 %0\n\t"
+                        : "=d" (val)
+                        : "0" (val)
+		    );
+        val++;
+        return val;
+}
+
+static inline int __ffs(unsigned int val)
+{
+        asm volatile(
+                        "bitrev %0\n\t"
+                        "ff1 %0\n\t"
+                        : "=d" (val)
+                        : "0" (val)
+		    );
+        return val;
+}
+
+#else
+#include <asm-generic/bitops/ffs.h>
+#include <asm-generic/bitops/__ffs.h>
+#endif
+
+#include <asm-generic/bitops/sched.h>
+#include <asm-generic/bitops/ffz.h>
+
+static __inline__ void set_bit(int nr, volatile unsigned long * addr)
+{
+#ifdef CONFIG_COLDFIRE
+	__asm__ __volatile__ ("lea %0,%%a0; bset %1,(%%a0)"
+	     : "+m" (((volatile char *)addr)[(nr^31) >> 3])
+	     : "d" (nr)
+	     : "%a0", "cc");
+#else
+	__asm__ __volatile__ ("bset %1,%0"
+	     : "+m" (((volatile char *)addr)[(nr^31) >> 3])
+	     : "di" (nr)
+	     : "cc");
+#endif
+}
+
+#define __set_bit(nr, addr) set_bit(nr, addr)
+
+/*
+ * clear_bit() doesn't provide any barrier for the compiler.
+ */
+#define smp_mb__before_clear_bit()	barrier()
+#define smp_mb__after_clear_bit()	barrier()
+
+static __inline__ void clear_bit(int nr, volatile unsigned long * addr)
+{
+#ifdef CONFIG_COLDFIRE
+	__asm__ __volatile__ ("lea %0,%%a0; bclr %1,(%%a0)"
+	     : "+m" (((volatile char *)addr)[(nr^31) >> 3])
+	     : "d" (nr)
+	     : "%a0", "cc");
+#else
+	__asm__ __volatile__ ("bclr %1,%0"
+	     : "+m" (((volatile char *)addr)[(nr^31) >> 3])
+	     : "di" (nr)
+	     : "cc");
+#endif
+}
+
+#define __clear_bit(nr, addr) clear_bit(nr, addr)
+
+static __inline__ void change_bit(int nr, volatile unsigned long * addr)
+{
+#ifdef CONFIG_COLDFIRE
+	__asm__ __volatile__ ("lea %0,%%a0; bchg %1,(%%a0)"
+	     : "+m" (((volatile char *)addr)[(nr^31) >> 3])
+	     : "d" (nr)
+	     : "%a0", "cc");
+#else
+	__asm__ __volatile__ ("bchg %1,%0"
+	     : "+m" (((volatile char *)addr)[(nr^31) >> 3])
+	     : "di" (nr)
+	     : "cc");
+#endif
+}
+
+#define __change_bit(nr, addr) change_bit(nr, addr)
+
+static __inline__ int test_and_set_bit(int nr, volatile unsigned long * addr)
+{
+	char retval;
+
+#ifdef CONFIG_COLDFIRE
+	__asm__ __volatile__ ("lea %1,%%a0; bset %2,(%%a0); sne %0"
+	     : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
+	     : "d" (nr)
+	     : "%a0");
+#else
+	__asm__ __volatile__ ("bset %2,%1; sne %0"
+	     : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
+	     : "di" (nr)
+	     /* No clobber */);
+#endif
+
+	return retval;
+}
+
+#define __test_and_set_bit(nr, addr) test_and_set_bit(nr, addr)
+
+static __inline__ int test_and_clear_bit(int nr, volatile unsigned long * addr)
+{
+	char retval;
+
+#ifdef CONFIG_COLDFIRE
+	__asm__ __volatile__ ("lea %1,%%a0; bclr %2,(%%a0); sne %0"
+	     : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
+	     : "d" (nr)
+	     : "%a0");
+#else
+	__asm__ __volatile__ ("bclr %2,%1; sne %0"
+	     : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
+	     : "di" (nr)
+	     /* No clobber */);
+#endif
+
+	return retval;
+}
+
+#define __test_and_clear_bit(nr, addr) test_and_clear_bit(nr, addr)
+
+static __inline__ int test_and_change_bit(int nr, volatile unsigned long * addr)
+{
+	char retval;
+
+#ifdef CONFIG_COLDFIRE
+	__asm__ __volatile__ ("lea %1,%%a0\n\tbchg %2,(%%a0)\n\tsne %0"
+	     : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
+	     : "d" (nr)
+	     : "%a0");
+#else
+	__asm__ __volatile__ ("bchg %2,%1; sne %0"
+	     : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
+	     : "di" (nr)
+	     /* No clobber */);
+#endif
+
+	return retval;
+}
+
+#define __test_and_change_bit(nr, addr) test_and_change_bit(nr, addr)
+
+/*
+ * This routine doesn't need to be atomic.
+ */
+static __inline__ int __constant_test_bit(int nr, const volatile unsigned long * addr)
+{
+	return ((1UL << (nr & 31)) & (((const volatile unsigned int *) addr)[nr >> 5])) != 0;
+}
+
+static __inline__ int __test_bit(int nr, const volatile unsigned long * addr)
+{
+	int 	* a = (int *) addr;
+	int	mask;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	return ((mask & *a) != 0);
+}
+
+#define test_bit(nr,addr) \
+(__builtin_constant_p(nr) ? \
+ __constant_test_bit((nr),(addr)) : \
+ __test_bit((nr),(addr)))
+
+#include <asm-generic/bitops/find.h>
+#include <asm-generic/bitops/hweight.h>
+#include <asm-generic/bitops/lock.h>
+
+static __inline__ int ext2_set_bit(int nr, volatile void * addr)
+{
+	char retval;
+
+#ifdef CONFIG_COLDFIRE
+	__asm__ __volatile__ ("lea %1,%%a0; bset %2,(%%a0); sne %0"
+	     : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3])
+	     : "d" (nr)
+	     : "%a0");
+#else
+	__asm__ __volatile__ ("bset %2,%1; sne %0"
+	     : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3])
+	     : "di" (nr)
+	     /* No clobber */);
+#endif
+
+	return retval;
+}
+
+static __inline__ int ext2_clear_bit(int nr, volatile void * addr)
+{
+	char retval;
+
+#ifdef CONFIG_COLDFIRE
+	__asm__ __volatile__ ("lea %1,%%a0; bclr %2,(%%a0); sne %0"
+	     : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3])
+	     : "d" (nr)
+	     : "%a0");
+#else
+	__asm__ __volatile__ ("bclr %2,%1; sne %0"
+	     : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3])
+	     : "di" (nr)
+	     /* No clobber */);
+#endif
+
+	return retval;
+}
+
+#define ext2_set_bit_atomic(lock, nr, addr)		\
+	({						\
+		int ret;				\
+		spin_lock(lock);			\
+		ret = ext2_set_bit((nr), (addr));	\
+		spin_unlock(lock);			\
+		ret;					\
+	})
+
+#define ext2_clear_bit_atomic(lock, nr, addr)		\
+	({						\
+		int ret;				\
+		spin_lock(lock);			\
+		ret = ext2_clear_bit((nr), (addr));	\
+		spin_unlock(lock);			\
+		ret;					\
+	})
+
+static __inline__ int ext2_test_bit(int nr, const volatile void * addr)
+{
+	char retval;
+
+#ifdef CONFIG_COLDFIRE
+	__asm__ __volatile__ ("lea %1,%%a0; btst %2,(%%a0); sne %0"
+	     : "=d" (retval)
+	     : "m" (((const volatile char *)addr)[nr >> 3]), "d" (nr)
+	     : "%a0");
+#else
+	__asm__ __volatile__ ("btst %2,%1; sne %0"
+	     : "=d" (retval)
+	     : "m" (((const volatile char *)addr)[nr >> 3]), "di" (nr)
+	     /* No clobber */);
+#endif
+
+	return retval;
+}
+
+#define ext2_find_first_zero_bit(addr, size) \
+        ext2_find_next_zero_bit((addr), (size), 0)
+
+static __inline__ unsigned long ext2_find_next_zero_bit(void *addr, unsigned long size, unsigned long offset)
+{
+	unsigned long *p = ((unsigned long *) addr) + (offset >> 5);
+	unsigned long result = offset & ~31UL;
+	unsigned long tmp;
+
+	if (offset >= size)
+		return size;
+	size -= result;
+	offset &= 31UL;
+	if(offset) {
+		/* We hold the little endian value in tmp, but then the
+		 * shift is illegal. So we could keep a big endian value
+		 * in tmp, like this:
+		 *
+		 * tmp = __swab32(*(p++));
+		 * tmp |= ~0UL >> (32-offset);
+		 *
+		 * but this would decrease performance, so we change the
+		 * shift:
+		 */
+		tmp = *(p++);
+		tmp |= __swab32(~0UL >> (32-offset));
+		if(size < 32)
+			goto found_first;
+		if(~tmp)
+			goto found_middle;
+		size -= 32;
+		result += 32;
+	}
+	while(size & ~31UL) {
+		if(~(tmp = *(p++)))
+			goto found_middle;
+		result += 32;
+		size -= 32;
+	}
+	if(!size)
+		return result;
+	tmp = *p;
+
+found_first:
+	/* tmp is little endian, so we would have to swab the shift,
+	 * see above. But then we have to swab tmp below for ffz, so
+	 * we might as well do this here.
+	 */
+	return result + ffz(__swab32(tmp) | (~0UL << size));
+found_middle:
+	return result + ffz(__swab32(tmp));
+}
+
+#define ext2_find_next_bit(addr, size, off) \
+	generic_find_next_le_bit((unsigned long *)(addr), (size), (off))
+#include <asm-generic/bitops/minix.h>
+
+#endif /* __KERNEL__ */
+
+#include <asm-generic/bitops/fls.h>
+#include <asm-generic/bitops/fls64.h>
+
+#endif /* _M68KNOMMU_BITOPS_H */
diff --git a/arch/m68knommu/include/asm/bootinfo.h b/arch/m68knommu/include/asm/bootinfo.h
new file mode 100644
index 00000000000..c12e526f518
--- /dev/null
+++ b/arch/m68knommu/include/asm/bootinfo.h
@@ -0,0 +1,2 @@
+
+/* Nothing for m68knommu */
diff --git a/arch/m68knommu/include/asm/bootstd.h b/arch/m68knommu/include/asm/bootstd.h
new file mode 100644
index 00000000000..bdc1a4ac4fe
--- /dev/null
+++ b/arch/m68knommu/include/asm/bootstd.h
@@ -0,0 +1,132 @@
+/* bootstd.h:  Bootloader system call interface
+ *
+ * (c) 1999, Rt-Control, Inc.
+ */
+
+#ifndef __BOOTSTD_H__
+#define __BOOTSTD_H__
+
+#define NR_BSC 21            /* last used bootloader system call */
+
+#define __BN_reset        0  /* reset and start the bootloader */
+#define __BN_test         1  /* tests the system call interface */
+#define __BN_exec         2  /* executes a bootloader image */
+#define __BN_exit         3  /* terminates a bootloader image */
+#define __BN_program      4  /* program FLASH from a chain */
+#define __BN_erase        5  /* erase sector(s) of FLASH */
+#define __BN_open         6
+#define __BN_write        7
+#define __BN_read         8
+#define __BN_close        9
+#define __BN_mmap         10 /* map a file descriptor into memory */
+#define __BN_munmap       11 /* remove a file to memory mapping */
+#define __BN_gethwaddr    12 /* get the hardware address of my interfaces */
+#define __BN_getserialnum 13 /* get the serial number of this board */
+#define __BN_getbenv      14 /* get a bootloader envvar */
+#define __BN_setbenv      15 /* get a bootloader envvar */
+#define __BN_setpmask     16 /* set the protection mask */
+#define __BN_readenv      17 /* read environment variables */
+#define __BN_flash_chattr_range		18
+#define __BN_flash_erase_range		19
+#define __BN_flash_write_range		20
+
+/* Calling conventions compatible to (uC)linux/68k
+ * We use simmilar macros to call into the bootloader as for uClinux
+ */
+
+#define __bsc_return(type, res) \
+do { \
+   if ((unsigned long)(res) >= (unsigned long)(-64)) { \
+      /* let errno be a function, preserve res in %d0 */ \
+      int __err = -(res); \
+      errno = __err; \
+      res = -1; \
+   } \
+   return (type)(res); \
+} while (0)
+
+#define _bsc0(type,name) \
+type name(void) \
+{ \
+   register long __res __asm__ ("%d0") = __BN_##name; \
+   __asm__ __volatile__ ("trap #2" \
+                         : "=g" (__res) \
+                         : "0" (__res) \
+                         ); \
+   __bsc_return(type,__res); \
+}
+
+#define _bsc1(type,name,atype,a) \
+type name(atype a) \
+{ \
+   register long __res __asm__ ("%d0") = __BN_##name; \
+   register long __a __asm__ ("%d1") = (long)a; \
+   __asm__ __volatile__ ("trap #2" \
+                         : "=g" (__res) \
+                         : "0" (__res), "d" (__a) \
+                         ); \
+   __bsc_return(type,__res); \
+}
+
+#define _bsc2(type,name,atype,a,btype,b) \
+type name(atype a, btype b) \
+{ \
+   register long __res __asm__ ("%d0") = __BN_##name; \
+   register long __a __asm__ ("%d1") = (long)a; \
+   register long __b __asm__ ("%d2") = (long)b; \
+   __asm__ __volatile__ ("trap #2" \
+                         : "=g" (__res) \
+                         : "0" (__res), "d" (__a), "d" (__b) \
+                         ); \
+   __bsc_return(type,__res); \
+}
+
+#define _bsc3(type,name,atype,a,btype,b,ctype,c) \
+type name(atype a, btype b, ctype c) \
+{ \
+   register long __res __asm__ ("%d0") = __BN_##name; \
+   register long __a __asm__ ("%d1") = (long)a; \
+   register long __b __asm__ ("%d2") = (long)b; \
+   register long __c __asm__ ("%d3") = (long)c; \
+   __asm__ __volatile__ ("trap #2" \
+                         : "=g" (__res) \
+                         : "0" (__res), "d" (__a), "d" (__b), \
+                           "d" (__c) \
+                         ); \
+   __bsc_return(type,__res); \
+}
+
+#define _bsc4(type,name,atype,a,btype,b,ctype,c,dtype,d) \
+type name(atype a, btype b, ctype c, dtype d) \
+{ \
+   register long __res __asm__ ("%d0") = __BN_##name; \
+   register long __a __asm__ ("%d1") = (long)a; \
+   register long __b __asm__ ("%d2") = (long)b; \
+   register long __c __asm__ ("%d3") = (long)c; \
+   register long __d __asm__ ("%d4") = (long)d; \
+   __asm__ __volatile__ ("trap #2" \
+                         : "=g" (__res) \
+                         : "0" (__res), "d" (__a), "d" (__b), \
+                           "d" (__c), "d" (__d) \
+                         ); \
+   __bsc_return(type,__res); \
+}
+
+#define _bsc5(type,name,atype,a,btype,b,ctype,c,dtype,d,etype,e) \
+type name(atype a, btype b, ctype c, dtype d, etype e) \
+{ \
+   register long __res __asm__ ("%d0") = __BN_##name; \
+   register long __a __asm__ ("%d1") = (long)a; \
+   register long __b __asm__ ("%d2") = (long)b; \
+   register long __c __asm__ ("%d3") = (long)c; \
+   register long __d __asm__ ("%d4") = (long)d; \
+   register long __e __asm__ ("%d5") = (long)e; \
+   __asm__ __volatile__ ("trap #2" \
+                         : "=g" (__res) \
+                         : "0" (__res), "d" (__a), "d" (__b), \
+                           "d" (__c), "d" (__d), "d" (__e) \
+                         ); \
+   __bsc_return(type,__res); \
+}
+
+#endif /* __BOOTSTD_H__ */
diff --git a/arch/m68knommu/include/asm/bug.h b/arch/m68knommu/include/asm/bug.h
new file mode 100644
index 00000000000..70e7dc0af21
--- /dev/null
+++ b/arch/m68knommu/include/asm/bug.h
@@ -0,0 +1,4 @@
+#ifndef _M68KNOMMU_BUG_H
+#define _M68KNOMMU_BUG_H
+#include <asm-generic/bug.h>
+#endif
diff --git a/arch/m68knommu/include/asm/bugs.h b/arch/m68knommu/include/asm/bugs.h
new file mode 100644
index 00000000000..5f382dac3a6
--- /dev/null
+++ b/arch/m68knommu/include/asm/bugs.h
@@ -0,0 +1,16 @@
+/*
+ *  include/asm-m68k/bugs.h
+ *
+ *  Copyright (C) 1994  Linus Torvalds
+ */
+
+/*
+ * This is included by init/main.c to check for architecture-dependent bugs.
+ *
+ * Needs:
+ *	void check_bugs(void);
+ */
+
+static void check_bugs(void)
+{
+}
diff --git a/arch/m68knommu/include/asm/byteorder.h b/arch/m68knommu/include/asm/byteorder.h
new file mode 100644
index 00000000000..20bb4426b61
--- /dev/null
+++ b/arch/m68knommu/include/asm/byteorder.h
@@ -0,0 +1,27 @@
+#ifndef _M68KNOMMU_BYTEORDER_H
+#define _M68KNOMMU_BYTEORDER_H
+
+#include <linux/types.h>
+
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+#  define __BYTEORDER_HAS_U64__
+#  define __SWAB_64_THRU_32__
+#endif
+
+#if defined (__mcfisaaplus__) || defined (__mcfisac__)
+static inline __attribute_const__ __u32 ___arch__swab32(__u32 val)
+{
+	asm(
+			"byterev %0"
+			: "=d" (val)
+			: "0" (val)
+	   );
+	return val;
+}
+
+#define __arch__swab32(x) ___arch__swab32(x)
+#endif
+
+#include <linux/byteorder/big_endian.h>
+
+#endif /* _M68KNOMMU_BYTEORDER_H */
diff --git a/arch/m68knommu/include/asm/cache.h b/arch/m68knommu/include/asm/cache.h
new file mode 100644
index 00000000000..24e9eace5f8
--- /dev/null
+++ b/arch/m68knommu/include/asm/cache.h
@@ -0,0 +1,12 @@
+#ifndef __ARCH_M68KNOMMU_CACHE_H
+#define __ARCH_M68KNOMMU_CACHE_H
+
+/* bytes per L1 cache line */
+#define        L1_CACHE_BYTES  16	/* this need to be at least 1 */
+
+/* m68k-elf-gcc  2.95.2 doesn't like these */
+
+#define __cacheline_aligned
+#define ____cacheline_aligned
+
+#endif
diff --git a/arch/m68knommu/include/asm/cachectl.h b/arch/m68knommu/include/asm/cachectl.h
new file mode 100644
index 00000000000..bcf5a6a9dd5
--- /dev/null
+++ b/arch/m68knommu/include/asm/cachectl.h
@@ -0,0 +1 @@
+#include <asm-m68k/cachectl.h>
diff --git a/arch/m68knommu/include/asm/cacheflush.h b/arch/m68knommu/include/asm/cacheflush.h
new file mode 100644
index 00000000000..87e5dc0413b
--- /dev/null
+++ b/arch/m68knommu/include/asm/cacheflush.h
@@ -0,0 +1,84 @@
+#ifndef _M68KNOMMU_CACHEFLUSH_H
+#define _M68KNOMMU_CACHEFLUSH_H
+
+/*
+ * (C) Copyright 2000-2004, Greg Ungerer <gerg@snapgear.com>
+ */
+#include <linux/mm.h>
+
+#define flush_cache_all()			__flush_cache_all()
+#define flush_cache_mm(mm)			do { } while (0)
+#define flush_cache_dup_mm(mm)			do { } while (0)
+#define flush_cache_range(vma, start, end)	__flush_cache_all()
+#define flush_cache_page(vma, vmaddr)		do { } while (0)
+#define flush_dcache_range(start,len)		__flush_cache_all()
+#define flush_dcache_page(page)			do { } while (0)
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+#define flush_icache_range(start,len)		__flush_cache_all()
+#define flush_icache_page(vma,pg)		do { } while (0)
+#define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
+#define flush_cache_vmap(start, end)		do { } while (0)
+#define flush_cache_vunmap(start, end)		do { } while (0)
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+	memcpy(dst, src, len)
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+	memcpy(dst, src, len)
+
+static inline void __flush_cache_all(void)
+{
+#ifdef CONFIG_M5407
+	/*
+	 *	Use cpushl to push and invalidate all cache lines.
+	 *	Gas doesn't seem to know how to generate the ColdFire
+	 *	cpushl instruction... Oh well, bit stuff it for now.
+	 */
+	__asm__ __volatile__ (
+		"nop\n\t"
+		"clrl	%%d0\n\t"
+		"1:\n\t"
+		"movel	%%d0,%%a0\n\t"
+		"2:\n\t"
+		".word	0xf468\n\t"
+		"addl	#0x10,%%a0\n\t"
+		"cmpl	#0x00000800,%%a0\n\t"
+		"blt	2b\n\t"
+		"addql	#1,%%d0\n\t"
+		"cmpil	#4,%%d0\n\t"
+		"bne	1b\n\t"
+		"movel	#0xb6088500,%%d0\n\t"
+		"movec	%%d0,%%CACR\n\t"
+		: : : "d0", "a0" );
+#endif /* CONFIG_M5407 */
+#if defined(CONFIG_M527x) || defined(CONFIG_M528x)
+	__asm__ __volatile__ (
+		"movel	#0x81000200, %%d0\n\t"
+		"movec	%%d0, %%CACR\n\t"
+		"nop\n\t"
+		: : : "d0" );
+#endif /* CONFIG_M527x || CONFIG_M528x */
+#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || defined(CONFIG_M5272)
+	__asm__ __volatile__ (
+		"movel	#0x81000100, %%d0\n\t"
+		"movec	%%d0, %%CACR\n\t"
+		"nop\n\t"
+		: : : "d0" );
+#endif /* CONFIG_M5206 || CONFIG_M5206e || CONFIG_M5272 */
+#ifdef CONFIG_M5249
+	__asm__ __volatile__ (
+		"movel	#0xa1000200, %%d0\n\t"
+		"movec	%%d0, %%CACR\n\t"
+		"nop\n\t"
+		: : : "d0" );
+#endif /* CONFIG_M5249 */
+#ifdef CONFIG_M532x
+	__asm__ __volatile__ (
+		"movel	#0x81000200, %%d0\n\t"
+		"movec	%%d0, %%CACR\n\t"
+		"nop\n\t"
+		: : : "d0" );
+#endif /* CONFIG_M532x */
+}
+
+#endif /* _M68KNOMMU_CACHEFLUSH_H */
diff --git a/arch/m68knommu/include/asm/checksum.h b/arch/m68knommu/include/asm/checksum.h
new file mode 100644
index 00000000000..81883482ffb
--- /dev/null
+++ b/arch/m68knommu/include/asm/checksum.h
@@ -0,0 +1,132 @@
+#ifndef _M68K_CHECKSUM_H
+#define _M68K_CHECKSUM_H
+
+#include <linux/in6.h>
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+__wsum csum_partial(const void *buff, int len, __wsum sum);
+
+/*
+ * the same as csum_partial, but copies from src while it
+ * checksums
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+
+__wsum csum_partial_copy_nocheck(const void *src, void *dst,
+	int len, __wsum sum);
+
+
+/*
+ * the same as csum_partial_copy, but copies from user space.
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+
+extern __wsum csum_partial_copy_from_user(const void __user *src,
+	void *dst, int len, __wsum sum, int *csum_err);
+
+__sum16 ip_fast_csum(const void *iph, unsigned int ihl);
+
+/*
+ *	Fold a partial checksum
+ */
+
+static inline __sum16 csum_fold(__wsum sum)
+{
+	unsigned int tmp = (__force u32)sum;
+#ifdef CONFIG_COLDFIRE
+	tmp = (tmp & 0xffff) + (tmp >> 16);
+	tmp = (tmp & 0xffff) + (tmp >> 16);
+	return (__force __sum16)~tmp;
+#else
+	__asm__("swap %1\n\t"
+		"addw %1, %0\n\t"
+		"clrw %1\n\t"
+		"addxw %1, %0"
+		: "=&d" (sum), "=&d" (tmp)
+		: "0" (sum), "1" (sum));
+	return (__force __sum16)~sum;
+#endif
+}
+
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+
+static inline __wsum
+csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
+		  unsigned short proto, __wsum sum)
+{
+	__asm__ ("addl  %1,%0\n\t"
+		 "addxl %4,%0\n\t"
+		 "addxl %5,%0\n\t"
+		 "clrl %1\n\t"
+		 "addxl %1,%0"
+		 : "=&d" (sum), "=&d" (saddr)
+		 : "0" (daddr), "1" (saddr), "d" (len + proto),
+		   "d"(sum));
+	return sum;
+}
+
+static inline __sum16
+csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
+		  unsigned short proto, __wsum sum)
+{
+	return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+
+extern __sum16 ip_compute_csum(const void *buff, int len);
+
+#define _HAVE_ARCH_IPV6_CSUM
+static __inline__ __sum16
+csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr,
+		__u32 len, unsigned short proto, __wsum sum)
+{
+	register unsigned long tmp;
+	__asm__("addl %2@,%0\n\t"
+		"movel %2@(4),%1\n\t"
+		"addxl %1,%0\n\t"
+		"movel %2@(8),%1\n\t"
+		"addxl %1,%0\n\t"
+		"movel %2@(12),%1\n\t"
+		"addxl %1,%0\n\t"
+		"movel %3@,%1\n\t"
+		"addxl %1,%0\n\t"
+		"movel %3@(4),%1\n\t"
+		"addxl %1,%0\n\t"
+		"movel %3@(8),%1\n\t"
+		"addxl %1,%0\n\t"
+		"movel %3@(12),%1\n\t"
+		"addxl %1,%0\n\t"
+		"addxl %4,%0\n\t"
+		"clrl %1\n\t"
+		"addxl %1,%0"
+		: "=&d" (sum), "=&d" (tmp)
+		: "a" (saddr), "a" (daddr), "d" (len + proto),
+		  "0" (sum));
+
+	return csum_fold(sum);
+}
+
+#endif /* _M68K_CHECKSUM_H */
diff --git a/arch/m68knommu/include/asm/coldfire.h b/arch/m68knommu/include/asm/coldfire.h
new file mode 100644
index 00000000000..83a9fa4e618
--- /dev/null
+++ b/arch/m68knommu/include/asm/coldfire.h
@@ -0,0 +1,51 @@
+/****************************************************************************/
+
+/*
+ *	coldfire.h -- Motorola ColdFire CPU sepecific defines
+ *
+ *	(C) Copyright 1999-2006, Greg Ungerer (gerg@snapgear.com)
+ *	(C) Copyright 2000, Lineo (www.lineo.com)
+ */
+
+/****************************************************************************/
+#ifndef	coldfire_h
+#define	coldfire_h
+/****************************************************************************/
+
+
+/*
+ *	Define master clock frequency. This is essentially done at config
+ *	time now. No point enumerating dozens of possible clock options
+ *	here. Also the peripheral clock (bus clock) divide ratio is set
+ *	at config time too.
+ */
+#ifdef CONFIG_CLOCK_SET
+#define	MCF_CLK		CONFIG_CLOCK_FREQ
+#define	MCF_BUSCLK	(CONFIG_CLOCK_FREQ / CONFIG_CLOCK_DIV)
+#else
+#error "Don't know what your ColdFire CPU clock frequency is??"
+#endif
+
+/*
+ *	Define the processor support peripherals base address.
+ *	This is generally setup by the boards start up code.
+ */
+#define	MCF_MBAR	0x10000000
+#define	MCF_MBAR2	0x80000000
+#if defined(CONFIG_M520x)
+#define	MCF_IPSBAR	0xFC000000
+#else
+#define	MCF_IPSBAR	0x40000000
+#endif
+
+#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
+    defined(CONFIG_M520x)
+#undef MCF_MBAR
+#define	MCF_MBAR	MCF_IPSBAR
+#elif defined(CONFIG_M532x)
+#undef MCF_MBAR
+#define MCF_MBAR	0x00000000
+#endif
+
+/****************************************************************************/
+#endif	/* coldfire_h */
diff --git a/arch/m68knommu/include/asm/commproc.h b/arch/m68knommu/include/asm/commproc.h
new file mode 100644
index 00000000000..edf5eb6c08d
--- /dev/null
+++ b/arch/m68knommu/include/asm/commproc.h
@@ -0,0 +1,703 @@
+
+/*
+ * 68360 Communication Processor Module.
+ * Copyright (c) 2000 Michael Leslie <mleslie@lineo.com> (mc68360) after:
+ * Copyright (c) 1997 Dan Malek <dmalek@jlc.net> (mpc8xx)
+ *
+ * This file contains structures and information for the communication
+ * processor channels.  Some CPM control and status is available
+ * through the 68360 internal memory map.  See include/asm/360_immap.h for details.
+ * This file is not a complete map of all of the 360 QUICC's capabilities
+ *
+ * On the MBX board, EPPC-Bug loads CPM microcode into the first 512
+ * bytes of the DP RAM and relocates the I2C parameter area to the
+ * IDMA1 space.  The remaining DP RAM is available for buffer descriptors
+ * or other use.
+ */
+#ifndef __CPM_360__
+#define __CPM_360__
+
+
+/* CPM Command register masks: */
+#define CPM_CR_RST	((ushort)0x8000)
+#define CPM_CR_OPCODE	((ushort)0x0f00)
+#define CPM_CR_CHAN	((ushort)0x00f0)
+#define CPM_CR_FLG	((ushort)0x0001)
+
+/* CPM Command set (opcodes): */
+#define CPM_CR_INIT_TRX		((ushort)0x0000)
+#define CPM_CR_INIT_RX		((ushort)0x0001)
+#define CPM_CR_INIT_TX		((ushort)0x0002)
+#define CPM_CR_HUNT_MODE	((ushort)0x0003)
+#define CPM_CR_STOP_TX		((ushort)0x0004)
+#define CPM_CR_GRSTOP_TX	((ushort)0x0005)
+#define CPM_CR_RESTART_TX	((ushort)0x0006)
+#define CPM_CR_CLOSE_RXBD	((ushort)0x0007)
+#define CPM_CR_SET_GADDR	((ushort)0x0008)
+#define CPM_CR_GCI_TIMEOUT	((ushort)0x0009)
+#define CPM_CR_GCI_ABORT	((ushort)0x000a)
+#define CPM_CR_RESET_BCS	((ushort)0x000a)
+
+/* CPM Channel numbers. */
+#define CPM_CR_CH_SCC1	((ushort)0x0000)
+#define CPM_CR_CH_SCC2	((ushort)0x0004)
+#define CPM_CR_CH_SPI	((ushort)0x0005)	/* SPI / Timers */
+#define CPM_CR_CH_TMR	((ushort)0x0005)
+#define CPM_CR_CH_SCC3	((ushort)0x0008)
+#define CPM_CR_CH_SMC1	((ushort)0x0009)	/* SMC1 / IDMA1 */
+#define CPM_CR_CH_IDMA1	((ushort)0x0009)
+#define CPM_CR_CH_SCC4	((ushort)0x000c)
+#define CPM_CR_CH_SMC2	((ushort)0x000d)	/* SMC2 / IDMA2 */
+#define CPM_CR_CH_IDMA2	((ushort)0x000d)
+
+
+#define mk_cr_cmd(CH, CMD)	((CMD << 8) | (CH << 4))
+
+#if 1 /* mleslie: I dinna think we have any such restrictions on
+       * DP RAM aboard the 360 board - see the MC68360UM p.3-3 */
+
+/* The dual ported RAM is multi-functional.  Some areas can be (and are
+ * being) used for microcode.  There is an area that can only be used
+ * as data ram for buffer descriptors, which is all we use right now.
+ * Currently the first 512 and last 256 bytes are used for microcode.
+ */
+/* mleslie: The uCquicc board is using no extra microcode in DPRAM */
+#define CPM_DATAONLY_BASE	((uint)0x0000)
+#define CPM_DATAONLY_SIZE	((uint)0x0800)
+#define CPM_DP_NOSPACE		((uint)0x7fffffff)
+
+#endif
+
+
+/* Export the base address of the communication processor registers
+ * and dual port ram. */
+/* extern	cpm360_t	*cpmp; */		/* Pointer to comm processor */
+extern QUICC *pquicc;
+uint         m360_cpm_dpalloc(uint size);
+/* void         *m360_cpm_hostalloc(uint size); */
+void	      m360_cpm_setbrg(uint brg, uint rate);
+
+#if 0 /* use QUICC_BD declared in include/asm/m68360_quicc.h  */
+/* Buffer descriptors used by many of the CPM protocols. */
+typedef struct cpm_buf_desc {
+	ushort	cbd_sc;		/* Status and Control */
+	ushort	cbd_datlen;	/* Data length in buffer */
+	uint	cbd_bufaddr;	/* Buffer address in host memory */
+} cbd_t;
+#endif
+
+
+/* rx bd status/control bits */
+#define BD_SC_EMPTY	((ushort)0x8000)	/* Recieve is empty */
+#define BD_SC_WRAP	((ushort)0x2000)	/* Last buffer descriptor in table */
+#define BD_SC_INTRPT	((ushort)0x1000)	/* Interrupt on change */
+#define BD_SC_LAST	((ushort)0x0800)	/* Last buffer in frame OR control char */
+
+#define BD_SC_FIRST	((ushort)0x0400)	/* 1st buffer in an HDLC frame */
+#define BD_SC_ADDR	((ushort)0x0400)	/* 1st byte is a multidrop address */
+
+#define BD_SC_CM	((ushort)0x0200)	/* Continous mode */
+#define BD_SC_ID	((ushort)0x0100)	/* Received too many idles */
+
+#define BD_SC_AM	((ushort)0x0080)	/* Multidrop address match */
+#define BD_SC_DE	((ushort)0x0080)	/* DPLL Error (HDLC) */
+
+#define BD_SC_BR	((ushort)0x0020)	/* Break received */
+#define BD_SC_LG	((ushort)0x0020)	/* Frame length violation (HDLC) */
+
+#define BD_SC_FR	((ushort)0x0010)	/* Framing error */
+#define BD_SC_NO	((ushort)0x0010)	/* Nonoctet aligned frame (HDLC) */
+
+#define BD_SC_PR	((ushort)0x0008)	/* Parity error */
+#define BD_SC_AB	((ushort)0x0008)	/* Received abort Sequence (HDLC) */
+
+#define BD_SC_OV	((ushort)0x0002)	/* Overrun */
+#define BD_SC_CD	((ushort)0x0001)	/* Carrier Detect lost */
+
+/* tx bd status/control bits (as differ from rx bd) */
+#define BD_SC_READY	((ushort)0x8000)	/* Transmit is ready */
+#define BD_SC_TC	((ushort)0x0400)	/* Transmit CRC */
+#define BD_SC_P		((ushort)0x0100)	/* xmt preamble */
+#define BD_SC_UN	((ushort)0x0002)	/* Underrun */
+
+
+
+
+/* Parameter RAM offsets. */
+
+
+
+/* In 2.4 ppc, the PROFF_S?C? are used as byte offsets into DPRAM.
+ * In 2.0, we use a more structured C struct map of DPRAM, and so 
+ * instead, we need only a parameter ram `slot'  */
+
+#define PRSLOT_SCC1	0
+#define PRSLOT_SCC2	1
+#define PRSLOT_SCC3	2
+#define PRSLOT_SMC1	2
+#define PRSLOT_SCC4	3
+#define PRSLOT_SMC2	3
+
+
+/* #define PROFF_SCC1	((uint)0x0000) */
+/* #define PROFF_SCC2	((uint)0x0100) */
+/* #define PROFF_SCC3	((uint)0x0200) */
+/* #define PROFF_SMC1	((uint)0x0280) */
+/* #define PROFF_SCC4	((uint)0x0300) */
+/* #define PROFF_SMC2	((uint)0x0380) */
+
+
+/* Define enough so I can at least use the serial port as a UART.
+ * The MBX uses SMC1 as the host serial port.
+ */
+typedef struct smc_uart {
+	ushort	smc_rbase;	/* Rx Buffer descriptor base address */
+	ushort	smc_tbase;	/* Tx Buffer descriptor base address */
+	u_char	smc_rfcr;	/* Rx function code */
+	u_char	smc_tfcr;	/* Tx function code */
+	ushort	smc_mrblr;	/* Max receive buffer length */
+	uint	smc_rstate;	/* Internal */
+	uint	smc_idp;	/* Internal */
+	ushort	smc_rbptr;	/* Internal */
+	ushort	smc_ibc;	/* Internal */
+	uint	smc_rxtmp;	/* Internal */
+	uint	smc_tstate;	/* Internal */
+	uint	smc_tdp;	/* Internal */
+	ushort	smc_tbptr;	/* Internal */
+	ushort	smc_tbc;	/* Internal */
+	uint	smc_txtmp;	/* Internal */
+	ushort	smc_maxidl;	/* Maximum idle characters */
+	ushort	smc_tmpidl;	/* Temporary idle counter */
+	ushort	smc_brklen;	/* Last received break length */
+	ushort	smc_brkec;	/* rcv'd break condition counter */
+	ushort	smc_brkcr;	/* xmt break count register */
+	ushort	smc_rmask;	/* Temporary bit mask */
+} smc_uart_t;
+
+/* Function code bits.
+*/
+#define SMC_EB	((u_char)0x10)	/* Set big endian byte order */
+
+/* SMC uart mode register.
+*/
+#define	SMCMR_REN	((ushort)0x0001)
+#define SMCMR_TEN	((ushort)0x0002)
+#define SMCMR_DM	((ushort)0x000c)
+#define SMCMR_SM_GCI	((ushort)0x0000)
+#define SMCMR_SM_UART	((ushort)0x0020)
+#define SMCMR_SM_TRANS	((ushort)0x0030)
+#define SMCMR_SM_MASK	((ushort)0x0030)
+#define SMCMR_PM_EVEN	((ushort)0x0100)	/* Even parity, else odd */
+#define SMCMR_REVD	SMCMR_PM_EVEN
+#define SMCMR_PEN	((ushort)0x0200)	/* Parity enable */
+#define SMCMR_BS	SMCMR_PEN
+#define SMCMR_SL	((ushort)0x0400)	/* Two stops, else one */
+#define SMCR_CLEN_MASK	((ushort)0x7800)	/* Character length */
+#define smcr_mk_clen(C)	(((C) << 11) & SMCR_CLEN_MASK)
+
+/* SMC2 as Centronics parallel printer.  It is half duplex, in that
+ * it can only receive or transmit.  The parameter ram values for
+ * each direction are either unique or properly overlap, so we can
+ * include them in one structure.
+ */
+typedef struct smc_centronics {
+	ushort	scent_rbase;
+	ushort	scent_tbase;
+	u_char	scent_cfcr;
+	u_char	scent_smask;
+	ushort	scent_mrblr;
+	uint	scent_rstate;
+	uint	scent_r_ptr;
+	ushort	scent_rbptr;
+	ushort	scent_r_cnt;
+	uint	scent_rtemp;
+	uint	scent_tstate;
+	uint	scent_t_ptr;
+	ushort	scent_tbptr;
+	ushort	scent_t_cnt;
+	uint	scent_ttemp;
+	ushort	scent_max_sl;
+	ushort	scent_sl_cnt;
+	ushort	scent_character1;
+	ushort	scent_character2;
+	ushort	scent_character3;
+	ushort	scent_character4;
+	ushort	scent_character5;
+	ushort	scent_character6;
+	ushort	scent_character7;
+	ushort	scent_character8;
+	ushort	scent_rccm;
+	ushort	scent_rccr;
+} smc_cent_t;
+
+/* Centronics Status Mask Register.
+*/
+#define SMC_CENT_F	((u_char)0x08)
+#define SMC_CENT_PE	((u_char)0x04)
+#define SMC_CENT_S	((u_char)0x02)
+
+/* SMC Event and Mask register.
+*/
+#define	SMCM_BRKE	((unsigned char)0x40)	/* When in UART Mode */
+#define	SMCM_BRK	((unsigned char)0x10)	/* When in UART Mode */
+#define	SMCM_TXE	((unsigned char)0x10)	/* When in Transparent Mode */
+#define	SMCM_BSY	((unsigned char)0x04)
+#define	SMCM_TX		((unsigned char)0x02)
+#define	SMCM_RX		((unsigned char)0x01)
+
+/* Baud rate generators.
+*/
+#define CPM_BRG_RST		((uint)0x00020000)
+#define CPM_BRG_EN		((uint)0x00010000)
+#define CPM_BRG_EXTC_INT	((uint)0x00000000)
+#define CPM_BRG_EXTC_CLK2	((uint)0x00004000)
+#define CPM_BRG_EXTC_CLK6	((uint)0x00008000)
+#define CPM_BRG_ATB		((uint)0x00002000)
+#define CPM_BRG_CD_MASK		((uint)0x00001ffe)
+#define CPM_BRG_DIV16		((uint)0x00000001)
+
+/* SCCs.
+*/
+#define SCC_GSMRH_IRP		((uint)0x00040000)
+#define SCC_GSMRH_GDE		((uint)0x00010000)
+#define SCC_GSMRH_TCRC_CCITT	((uint)0x00008000)
+#define SCC_GSMRH_TCRC_BISYNC	((uint)0x00004000)
+#define SCC_GSMRH_TCRC_HDLC	((uint)0x00000000)
+#define SCC_GSMRH_REVD		((uint)0x00002000)
+#define SCC_GSMRH_TRX		((uint)0x00001000)
+#define SCC_GSMRH_TTX		((uint)0x00000800)
+#define SCC_GSMRH_CDP		((uint)0x00000400)
+#define SCC_GSMRH_CTSP		((uint)0x00000200)
+#define SCC_GSMRH_CDS		((uint)0x00000100)
+#define SCC_GSMRH_CTSS		((uint)0x00000080)
+#define SCC_GSMRH_TFL		((uint)0x00000040)
+#define SCC_GSMRH_RFW		((uint)0x00000020)
+#define SCC_GSMRH_TXSY		((uint)0x00000010)
+#define SCC_GSMRH_SYNL16	((uint)0x0000000c)
+#define SCC_GSMRH_SYNL8		((uint)0x00000008)
+#define SCC_GSMRH_SYNL4		((uint)0x00000004)
+#define SCC_GSMRH_RTSM		((uint)0x00000002)
+#define SCC_GSMRH_RSYN		((uint)0x00000001)
+
+#define SCC_GSMRL_SIR		((uint)0x80000000)	/* SCC2 only */
+#define SCC_GSMRL_EDGE_NONE	((uint)0x60000000)
+#define SCC_GSMRL_EDGE_NEG	((uint)0x40000000)
+#define SCC_GSMRL_EDGE_POS	((uint)0x20000000)
+#define SCC_GSMRL_EDGE_BOTH	((uint)0x00000000)
+#define SCC_GSMRL_TCI		((uint)0x10000000)
+#define SCC_GSMRL_TSNC_3	((uint)0x0c000000)
+#define SCC_GSMRL_TSNC_4	((uint)0x08000000)
+#define SCC_GSMRL_TSNC_14	((uint)0x04000000)
+#define SCC_GSMRL_TSNC_INF	((uint)0x00000000)
+#define SCC_GSMRL_RINV		((uint)0x02000000)
+#define SCC_GSMRL_TINV		((uint)0x01000000)
+#define SCC_GSMRL_TPL_128	((uint)0x00c00000)
+#define SCC_GSMRL_TPL_64	((uint)0x00a00000)
+#define SCC_GSMRL_TPL_48	((uint)0x00800000)
+#define SCC_GSMRL_TPL_32	((uint)0x00600000)
+#define SCC_GSMRL_TPL_16	((uint)0x00400000)
+#define SCC_GSMRL_TPL_8		((uint)0x00200000)
+#define SCC_GSMRL_TPL_NONE	((uint)0x00000000)
+#define SCC_GSMRL_TPP_ALL1	((uint)0x00180000)
+#define SCC_GSMRL_TPP_01	((uint)0x00100000)
+#define SCC_GSMRL_TPP_10	((uint)0x00080000)
+#define SCC_GSMRL_TPP_ZEROS	((uint)0x00000000)
+#define SCC_GSMRL_TEND		((uint)0x00040000)
+#define SCC_GSMRL_TDCR_32	((uint)0x00030000)
+#define SCC_GSMRL_TDCR_16	((uint)0x00020000)
+#define SCC_GSMRL_TDCR_8	((uint)0x00010000)
+#define SCC_GSMRL_TDCR_1	((uint)0x00000000)
+#define SCC_GSMRL_RDCR_32	((uint)0x0000c000)
+#define SCC_GSMRL_RDCR_16	((uint)0x00008000)
+#define SCC_GSMRL_RDCR_8	((uint)0x00004000)
+#define SCC_GSMRL_RDCR_1	((uint)0x00000000)
+#define SCC_GSMRL_RENC_DFMAN	((uint)0x00003000)
+#define SCC_GSMRL_RENC_MANCH	((uint)0x00002000)
+#define SCC_GSMRL_RENC_FM0	((uint)0x00001000)
+#define SCC_GSMRL_RENC_NRZI	((uint)0x00000800)
+#define SCC_GSMRL_RENC_NRZ	((uint)0x00000000)
+#define SCC_GSMRL_TENC_DFMAN	((uint)0x00000600)
+#define SCC_GSMRL_TENC_MANCH	((uint)0x00000400)
+#define SCC_GSMRL_TENC_FM0	((uint)0x00000200)
+#define SCC_GSMRL_TENC_NRZI	((uint)0x00000100)
+#define SCC_GSMRL_TENC_NRZ	((uint)0x00000000)
+#define SCC_GSMRL_DIAG_LE	((uint)0x000000c0)	/* Loop and echo */
+#define SCC_GSMRL_DIAG_ECHO	((uint)0x00000080)
+#define SCC_GSMRL_DIAG_LOOP	((uint)0x00000040)
+#define SCC_GSMRL_DIAG_NORM	((uint)0x00000000)
+#define SCC_GSMRL_ENR		((uint)0x00000020)
+#define SCC_GSMRL_ENT		((uint)0x00000010)
+#define SCC_GSMRL_MODE_ENET	((uint)0x0000000c)
+#define SCC_GSMRL_MODE_DDCMP	((uint)0x00000009)
+#define SCC_GSMRL_MODE_BISYNC	((uint)0x00000008)
+#define SCC_GSMRL_MODE_V14	((uint)0x00000007)
+#define SCC_GSMRL_MODE_AHDLC	((uint)0x00000006)
+#define SCC_GSMRL_MODE_PROFIBUS	((uint)0x00000005)
+#define SCC_GSMRL_MODE_UART	((uint)0x00000004)
+#define SCC_GSMRL_MODE_SS7	((uint)0x00000003)
+#define SCC_GSMRL_MODE_ATALK	((uint)0x00000002)
+#define SCC_GSMRL_MODE_HDLC	((uint)0x00000000)
+
+#define SCC_TODR_TOD		((ushort)0x8000)
+
+/* SCC Event and Mask register.
+*/
+#define	SCCM_TXE	((unsigned char)0x10)
+#define	SCCM_BSY	((unsigned char)0x04)
+#define	SCCM_TX		((unsigned char)0x02)
+#define	SCCM_RX		((unsigned char)0x01)
+
+typedef struct scc_param {
+	ushort	scc_rbase;	/* Rx Buffer descriptor base address */
+	ushort	scc_tbase;	/* Tx Buffer descriptor base address */
+	u_char	scc_rfcr;	/* Rx function code */
+	u_char	scc_tfcr;	/* Tx function code */
+	ushort	scc_mrblr;	/* Max receive buffer length */
+	uint	scc_rstate;	/* Internal */
+	uint	scc_idp;	/* Internal */
+	ushort	scc_rbptr;	/* Internal */
+	ushort	scc_ibc;	/* Internal */
+	uint	scc_rxtmp;	/* Internal */
+	uint	scc_tstate;	/* Internal */
+	uint	scc_tdp;	/* Internal */
+	ushort	scc_tbptr;	/* Internal */
+	ushort	scc_tbc;	/* Internal */
+	uint	scc_txtmp;	/* Internal */
+	uint	scc_rcrc;	/* Internal */
+	uint	scc_tcrc;	/* Internal */
+} sccp_t;
+
+
+/* Function code bits.
+ */
+#define SCC_EB	((u_char)0x10)	/* Set big endian byte order */
+#define SCC_FC_DMA ((u_char)0x08) /* Set SDMA */
+
+/* CPM Ethernet through SCC1.
+ */
+typedef struct scc_enet {
+	sccp_t	sen_genscc;
+	uint	sen_cpres;	/* Preset CRC */
+	uint	sen_cmask;	/* Constant mask for CRC */
+	uint	sen_crcec;	/* CRC Error counter */
+	uint	sen_alec;	/* alignment error counter */
+	uint	sen_disfc;	/* discard frame counter */
+	ushort	sen_pads;	/* Tx short frame pad character */
+	ushort	sen_retlim;	/* Retry limit threshold */
+	ushort	sen_retcnt;	/* Retry limit counter */
+	ushort	sen_maxflr;	/* maximum frame length register */
+	ushort	sen_minflr;	/* minimum frame length register */
+	ushort	sen_maxd1;	/* maximum DMA1 length */
+	ushort	sen_maxd2;	/* maximum DMA2 length */
+	ushort	sen_maxd;	/* Rx max DMA */
+	ushort	sen_dmacnt;	/* Rx DMA counter */
+	ushort	sen_maxb;	/* Max BD byte count */
+	ushort	sen_gaddr1;	/* Group address filter */
+	ushort	sen_gaddr2;
+	ushort	sen_gaddr3;
+	ushort	sen_gaddr4;
+	uint	sen_tbuf0data0;	/* Save area 0 - current frame */
+	uint	sen_tbuf0data1;	/* Save area 1 - current frame */
+	uint	sen_tbuf0rba;	/* Internal */
+	uint	sen_tbuf0crc;	/* Internal */
+	ushort	sen_tbuf0bcnt;	/* Internal */
+	ushort	sen_paddrh;	/* physical address (MSB) */
+	ushort	sen_paddrm;
+	ushort	sen_paddrl;	/* physical address (LSB) */
+	ushort	sen_pper;	/* persistence */
+	ushort	sen_rfbdptr;	/* Rx first BD pointer */
+	ushort	sen_tfbdptr;	/* Tx first BD pointer */
+	ushort	sen_tlbdptr;	/* Tx last BD pointer */
+	uint	sen_tbuf1data0;	/* Save area 0 - current frame */
+	uint	sen_tbuf1data1;	/* Save area 1 - current frame */
+	uint	sen_tbuf1rba;	/* Internal */
+	uint	sen_tbuf1crc;	/* Internal */
+	ushort	sen_tbuf1bcnt;	/* Internal */
+	ushort	sen_txlen;	/* Tx Frame length counter */
+	ushort	sen_iaddr1;	/* Individual address filter */
+	ushort	sen_iaddr2;
+	ushort	sen_iaddr3;
+	ushort	sen_iaddr4;
+	ushort	sen_boffcnt;	/* Backoff counter */
+
+	/* NOTE: Some versions of the manual have the following items
+	 * incorrectly documented.  Below is the proper order.
+	 */
+	ushort	sen_taddrh;	/* temp address (MSB) */
+	ushort	sen_taddrm;
+	ushort	sen_taddrl;	/* temp address (LSB) */
+} scc_enet_t;
+
+
+
+#if defined (CONFIG_UCQUICC)
+/* uCquicc has the following signals connected to Ethernet:
+ *  68360    - lxt905
+ * PA0/RXD1  - rxd
+ * PA1/TXD1  - txd
+ * PA8/CLK1  - tclk
+ * PA9/CLK2  - rclk
+ * PC0/!RTS1 - t_en
+ * PC1/!CTS1 - col
+ * PC5/!CD1  - cd
+ */
+#define PA_ENET_RXD	PA_RXD1
+#define PA_ENET_TXD	PA_TXD1
+#define PA_ENET_TCLK	PA_CLK1
+#define PA_ENET_RCLK	PA_CLK2
+#define PC_ENET_TENA	PC_RTS1
+#define PC_ENET_CLSN	PC_CTS1
+#define PC_ENET_RENA	PC_CD1
+
+/* Control bits in the SICR to route TCLK (CLK1) and RCLK (CLK2) to
+ * SCC1.
+ */
+#define SICR_ENET_MASK	((uint)0x000000ff)
+#define SICR_ENET_CLKRT	((uint)0x0000002c)
+
+#endif /* config_ucquicc */
+
+
+#ifdef MBX
+/* Bits in parallel I/O port registers that have to be set/cleared
+ * to configure the pins for SCC1 use.  The TCLK and RCLK seem unique
+ * to the MBX860 board.  Any two of the four available clocks could be
+ * used, and the MPC860 cookbook manual has an example using different
+ * clock pins.
+ */
+#define PA_ENET_RXD	((ushort)0x0001)
+#define PA_ENET_TXD	((ushort)0x0002)
+#define PA_ENET_TCLK	((ushort)0x0200)
+#define PA_ENET_RCLK	((ushort)0x0800)
+#define PC_ENET_TENA	((ushort)0x0001)
+#define PC_ENET_CLSN	((ushort)0x0010)
+#define PC_ENET_RENA	((ushort)0x0020)
+
+/* Control bits in the SICR to route TCLK (CLK2) and RCLK (CLK4) to
+ * SCC1.  Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero.
+ */
+#define SICR_ENET_MASK	((uint)0x000000ff)
+#define SICR_ENET_CLKRT	((uint)0x0000003d)
+#endif
+
+#ifdef CONFIG_RPXLITE
+/* This ENET stuff is for the MPC850 with ethernet on SCC2.  Some of
+ * this may be unique to the RPX-Lite configuration.
+ * Note TENA is on Port B.
+ */
+#define PA_ENET_RXD	((ushort)0x0004)
+#define PA_ENET_TXD	((ushort)0x0008)
+#define PA_ENET_TCLK	((ushort)0x0200)
+#define PA_ENET_RCLK	((ushort)0x0800)
+#define PB_ENET_TENA	((uint)0x00002000)
+#define PC_ENET_CLSN	((ushort)0x0040)
+#define PC_ENET_RENA	((ushort)0x0080)
+
+#define SICR_ENET_MASK	((uint)0x0000ff00)
+#define SICR_ENET_CLKRT	((uint)0x00003d00)
+#endif
+
+#ifdef CONFIG_BSEIP
+/* This ENET stuff is for the MPC823 with ethernet on SCC2.
+ * This is unique to the BSE ip-Engine board.
+ */
+#define PA_ENET_RXD	((ushort)0x0004)
+#define PA_ENET_TXD	((ushort)0x0008)
+#define PA_ENET_TCLK	((ushort)0x0100)
+#define PA_ENET_RCLK	((ushort)0x0200)
+#define PB_ENET_TENA	((uint)0x00002000)
+#define PC_ENET_CLSN	((ushort)0x0040)
+#define PC_ENET_RENA	((ushort)0x0080)
+
+/* BSE uses port B and C bits for PHY control also.
+*/
+#define PB_BSE_POWERUP	((uint)0x00000004)
+#define PB_BSE_FDXDIS	((uint)0x00008000)
+#define PC_BSE_LOOPBACK	((ushort)0x0800)
+
+#define SICR_ENET_MASK	((uint)0x0000ff00)
+#define SICR_ENET_CLKRT	((uint)0x00002c00)
+#endif
+
+/* SCC Event register as used by Ethernet.
+*/
+#define SCCE_ENET_GRA	((ushort)0x0080)	/* Graceful stop complete */
+#define SCCE_ENET_TXE	((ushort)0x0010)	/* Transmit Error */
+#define SCCE_ENET_RXF	((ushort)0x0008)	/* Full frame received */
+#define SCCE_ENET_BSY	((ushort)0x0004)	/* All incoming buffers full */
+#define SCCE_ENET_TXB	((ushort)0x0002)	/* A buffer was transmitted */
+#define SCCE_ENET_RXB	((ushort)0x0001)	/* A buffer was received */
+
+/* SCC Mode Register (PMSR) as used by Ethernet.
+*/
+#define SCC_PMSR_HBC	((ushort)0x8000)	/* Enable heartbeat */
+#define SCC_PMSR_FC	((ushort)0x4000)	/* Force collision */
+#define SCC_PMSR_RSH	((ushort)0x2000)	/* Receive short frames */
+#define SCC_PMSR_IAM	((ushort)0x1000)	/* Check individual hash */
+#define SCC_PMSR_ENCRC	((ushort)0x0800)	/* Ethernet CRC mode */
+#define SCC_PMSR_PRO	((ushort)0x0200)	/* Promiscuous mode */
+#define SCC_PMSR_BRO	((ushort)0x0100)	/* Catch broadcast pkts */
+#define SCC_PMSR_SBT	((ushort)0x0080)	/* Special backoff timer */
+#define SCC_PMSR_LPB	((ushort)0x0040)	/* Set Loopback mode */
+#define SCC_PMSR_SIP	((ushort)0x0020)	/* Sample Input Pins */
+#define SCC_PMSR_LCW	((ushort)0x0010)	/* Late collision window */
+#define SCC_PMSR_NIB22	((ushort)0x000a)	/* Start frame search */
+#define SCC_PMSR_FDE	((ushort)0x0001)	/* Full duplex enable */
+
+/* Buffer descriptor control/status used by Ethernet receive.
+*/
+#define BD_ENET_RX_EMPTY	((ushort)0x8000)
+#define BD_ENET_RX_WRAP		((ushort)0x2000)
+#define BD_ENET_RX_INTR		((ushort)0x1000)
+#define BD_ENET_RX_LAST		((ushort)0x0800)
+#define BD_ENET_RX_FIRST	((ushort)0x0400)
+#define BD_ENET_RX_MISS		((ushort)0x0100)
+#define BD_ENET_RX_LG		((ushort)0x0020)
+#define BD_ENET_RX_NO		((ushort)0x0010)
+#define BD_ENET_RX_SH		((ushort)0x0008)
+#define BD_ENET_RX_CR		((ushort)0x0004)
+#define BD_ENET_RX_OV		((ushort)0x0002)
+#define BD_ENET_RX_CL		((ushort)0x0001)
+#define BD_ENET_RX_STATS	((ushort)0x013f)	/* All status bits */
+
+/* Buffer descriptor control/status used by Ethernet transmit.
+*/
+#define BD_ENET_TX_READY	((ushort)0x8000)
+#define BD_ENET_TX_PAD		((ushort)0x4000)
+#define BD_ENET_TX_WRAP		((ushort)0x2000)
+#define BD_ENET_TX_INTR		((ushort)0x1000)
+#define BD_ENET_TX_LAST		((ushort)0x0800)
+#define BD_ENET_TX_TC		((ushort)0x0400)
+#define BD_ENET_TX_DEF		((ushort)0x0200)
+#define BD_ENET_TX_HB		((ushort)0x0100)
+#define BD_ENET_TX_LC		((ushort)0x0080)
+#define BD_ENET_TX_RL		((ushort)0x0040)
+#define BD_ENET_TX_RCMASK	((ushort)0x003c)
+#define BD_ENET_TX_UN		((ushort)0x0002)
+#define BD_ENET_TX_CSL		((ushort)0x0001)
+#define BD_ENET_TX_STATS	((ushort)0x03ff)	/* All status bits */
+
+/* SCC as UART
+*/
+typedef struct scc_uart {
+	sccp_t	scc_genscc;
+	uint	scc_res1;	/* Reserved */
+	uint	scc_res2;	/* Reserved */
+	ushort	scc_maxidl;	/* Maximum idle chars */
+	ushort	scc_idlc;	/* temp idle counter */
+	ushort	scc_brkcr;	/* Break count register */
+	ushort	scc_parec;	/* receive parity error counter */
+	ushort	scc_frmec;	/* receive framing error counter */
+	ushort	scc_nosec;	/* receive noise counter */
+	ushort	scc_brkec;	/* receive break condition counter */
+	ushort	scc_brkln;	/* last received break length */
+	ushort	scc_uaddr1;	/* UART address character 1 */
+	ushort	scc_uaddr2;	/* UART address character 2 */
+	ushort	scc_rtemp;	/* Temp storage */
+	ushort	scc_toseq;	/* Transmit out of sequence char */
+	ushort	scc_char1;	/* control character 1 */
+	ushort	scc_char2;	/* control character 2 */
+	ushort	scc_char3;	/* control character 3 */
+	ushort	scc_char4;	/* control character 4 */
+	ushort	scc_char5;	/* control character 5 */
+	ushort	scc_char6;	/* control character 6 */
+	ushort	scc_char7;	/* control character 7 */
+	ushort	scc_char8;	/* control character 8 */
+	ushort	scc_rccm;	/* receive control character mask */
+	ushort	scc_rccr;	/* receive control character register */
+	ushort	scc_rlbc;	/* receive last break character */
+} scc_uart_t;
+
+/* SCC Event and Mask registers when it is used as a UART.
+*/
+#define UART_SCCM_GLR		((ushort)0x1000)
+#define UART_SCCM_GLT		((ushort)0x0800)
+#define UART_SCCM_AB		((ushort)0x0200)
+#define UART_SCCM_IDL		((ushort)0x0100)
+#define UART_SCCM_GRA		((ushort)0x0080)
+#define UART_SCCM_BRKE		((ushort)0x0040)
+#define UART_SCCM_BRKS		((ushort)0x0020)
+#define UART_SCCM_CCR		((ushort)0x0008)
+#define UART_SCCM_BSY		((ushort)0x0004)
+#define UART_SCCM_TX		((ushort)0x0002)
+#define UART_SCCM_RX		((ushort)0x0001)
+
+/* The SCC PMSR when used as a UART.
+*/
+#define SCU_PMSR_FLC		((ushort)0x8000)
+#define SCU_PMSR_SL		((ushort)0x4000)
+#define SCU_PMSR_CL		((ushort)0x3000)
+#define SCU_PMSR_UM		((ushort)0x0c00)
+#define SCU_PMSR_FRZ		((ushort)0x0200)
+#define SCU_PMSR_RZS		((ushort)0x0100)
+#define SCU_PMSR_SYN		((ushort)0x0080)
+#define SCU_PMSR_DRT		((ushort)0x0040)
+#define SCU_PMSR_PEN		((ushort)0x0010)
+#define SCU_PMSR_RPM		((ushort)0x000c)
+#define SCU_PMSR_REVP		((ushort)0x0008)
+#define SCU_PMSR_TPM		((ushort)0x0003)
+#define SCU_PMSR_TEVP		((ushort)0x0003)
+
+/* CPM Transparent mode SCC.
+ */
+typedef struct scc_trans {
+	sccp_t	st_genscc;
+	uint	st_cpres;	/* Preset CRC */
+	uint	st_cmask;	/* Constant mask for CRC */
+} scc_trans_t;
+
+#define BD_SCC_TX_LAST		((ushort)0x0800)
+
+
+
+/* CPM interrupts.  There are nearly 32 interrupts generated by CPM
+ * channels or devices.  All of these are presented to the PPC core
+ * as a single interrupt.  The CPM interrupt handler dispatches its
+ * own handlers, in a similar fashion to the PPC core handler.  We
+ * use the table as defined in the manuals (i.e. no special high
+ * priority and SCC1 == SCCa, etc...).
+ */
+/* #define CPMVEC_NR		32 */
+/* #define	CPMVEC_PIO_PC15		((ushort)0x1f) */
+/* #define	CPMVEC_SCC1		((ushort)0x1e) */
+/* #define	CPMVEC_SCC2		((ushort)0x1d) */
+/* #define	CPMVEC_SCC3		((ushort)0x1c) */
+/* #define	CPMVEC_SCC4		((ushort)0x1b) */
+/* #define	CPMVEC_PIO_PC14		((ushort)0x1a) */
+/* #define	CPMVEC_TIMER1		((ushort)0x19) */
+/* #define	CPMVEC_PIO_PC13		((ushort)0x18) */
+/* #define	CPMVEC_PIO_PC12		((ushort)0x17) */
+/* #define	CPMVEC_SDMA_CB_ERR	((ushort)0x16) */
+/* #define CPMVEC_IDMA1		((ushort)0x15) */
+/* #define CPMVEC_IDMA2		((ushort)0x14) */
+/* #define CPMVEC_TIMER2		((ushort)0x12) */
+/* #define CPMVEC_RISCTIMER	((ushort)0x11) */
+/* #define CPMVEC_I2C		((ushort)0x10) */
+/* #define	CPMVEC_PIO_PC11		((ushort)0x0f) */
+/* #define	CPMVEC_PIO_PC10		((ushort)0x0e) */
+/* #define CPMVEC_TIMER3		((ushort)0x0c) */
+/* #define	CPMVEC_PIO_PC9		((ushort)0x0b) */
+/* #define	CPMVEC_PIO_PC8		((ushort)0x0a) */
+/* #define	CPMVEC_PIO_PC7		((ushort)0x09) */
+/* #define CPMVEC_TIMER4		((ushort)0x07) */
+/* #define	CPMVEC_PIO_PC6		((ushort)0x06) */
+/* #define	CPMVEC_SPI		((ushort)0x05) */
+/* #define	CPMVEC_SMC1		((ushort)0x04) */
+/* #define	CPMVEC_SMC2		((ushort)0x03) */
+/* #define	CPMVEC_PIO_PC5		((ushort)0x02) */
+/* #define	CPMVEC_PIO_PC4		((ushort)0x01) */
+/* #define	CPMVEC_ERROR		((ushort)0x00) */
+
+extern void cpm_install_handler(int vec, void (*handler)(void *), void *dev_id);
+
+/* CPM interrupt configuration vector.
+*/
+#define	CICR_SCD_SCC4		((uint)0x00c00000)	/* SCC4 @ SCCd */
+#define	CICR_SCC_SCC3		((uint)0x00200000)	/* SCC3 @ SCCc */
+#define	CICR_SCB_SCC2		((uint)0x00040000)	/* SCC2 @ SCCb */
+#define	CICR_SCA_SCC1		((uint)0x00000000)	/* SCC1 @ SCCa */
+#define CICR_IRL_MASK		((uint)0x0000e000)	/* Core interrupt */
+#define CICR_HP_MASK		((uint)0x00001f00)	/* Hi-pri int. */
+#define CICR_IEN		((uint)0x00000080)	/* Int. enable */
+#define CICR_SPS		((uint)0x00000001)	/* SCC Spread */
+#endif /* __CPM_360__ */
diff --git a/arch/m68knommu/include/asm/cputime.h b/arch/m68knommu/include/asm/cputime.h
new file mode 100644
index 00000000000..a0c4a660878
--- /dev/null
+++ b/arch/m68knommu/include/asm/cputime.h
@@ -0,0 +1,6 @@
+#ifndef __M68KNOMMU_CPUTIME_H
+#define __M68KNOMMU_CPUTIME_H
+
+#include <asm-generic/cputime.h>
+
+#endif /* __M68KNOMMU_CPUTIME_H */
diff --git a/arch/m68knommu/include/asm/current.h b/arch/m68knommu/include/asm/current.h
new file mode 100644
index 00000000000..53ee0f9f7ce
--- /dev/null
+++ b/arch/m68knommu/include/asm/current.h
@@ -0,0 +1,24 @@
+#ifndef _M68KNOMMU_CURRENT_H
+#define _M68KNOMMU_CURRENT_H
+/*
+ *	current.h
+ *	(C) Copyright 2000, Lineo, David McCullough <davidm@uclinux.org>
+ *	(C) Copyright 2002, Greg Ungerer (gerg@snapgear.com)
+ *
+ *	rather than dedicate a register (as the m68k source does), we
+ *	just keep a global,  we should probably just change it all to be
+ *	current and lose _current_task.
+ */
+
+#include <linux/thread_info.h>
+
+struct task_struct;
+
+static inline struct task_struct *get_current(void)
+{
+	return(current_thread_info()->task);
+}
+
+#define	current	get_current()
+
+#endif /* _M68KNOMMU_CURRENT_H */
diff --git a/arch/m68knommu/include/asm/dbg.h b/arch/m68knommu/include/asm/dbg.h
new file mode 100644
index 00000000000..27af3270f67
--- /dev/null
+++ b/arch/m68knommu/include/asm/dbg.h
@@ -0,0 +1,6 @@
+#define DEBUG 1
+#ifdef CONFIG_COLDFIRE
+#define	BREAK asm volatile ("halt")
+#else
+#define BREAK *(volatile unsigned char *)0xdeadbee0 = 0
+#endif
diff --git a/arch/m68knommu/include/asm/delay.h b/arch/m68knommu/include/asm/delay.h
new file mode 100644
index 00000000000..55cbd6294ab
--- /dev/null
+++ b/arch/m68knommu/include/asm/delay.h
@@ -0,0 +1,76 @@
+#ifndef _M68KNOMMU_DELAY_H
+#define _M68KNOMMU_DELAY_H
+
+/*
+ * Copyright (C) 1994 Hamish Macdonald
+ * Copyright (C) 2004 Greg Ungerer <gerg@snapgear.com>
+ */
+
+#include <asm/param.h>
+
+static inline void __delay(unsigned long loops)
+{
+#if defined(CONFIG_COLDFIRE)
+	/* The coldfire runs this loop at significantly different speeds
+	 * depending upon long word alignment or not.  We'll pad it to
+	 * long word alignment which is the faster version.
+	 * The 0x4a8e is of course a 'tstl %fp' instruction.  This is better
+	 * than using a NOP (0x4e71) instruction because it executes in one
+	 * cycle not three and doesn't allow for an arbitary delay waiting
+	 * for bus cycles to finish.  Also fp/a6 isn't likely to cause a
+	 * stall waiting for the register to become valid if such is added
+	 * to the coldfire at some stage.
+	 */
+	__asm__ __volatile__ (	".balignw 4, 0x4a8e\n\t"
+				"1: subql #1, %0\n\t"
+				"jcc 1b"
+		: "=d" (loops) : "0" (loops));
+#else
+	__asm__ __volatile__ (	"1: subql #1, %0\n\t"
+				"jcc 1b"
+		: "=d" (loops) : "0" (loops));
+#endif
+}
+
+/*
+ *	Ideally we use a 32*32->64 multiply to calculate the number of
+ *	loop iterations, but the older standard 68k and ColdFire do not
+ *	have this instruction. So for them we have a clsoe approximation
+ *	loop using 32*32->32 multiplies only. This calculation based on
+ *	the ARM version of delay.
+ *
+ *	We want to implement:
+ *
+ *	loops = (usecs * 0x10c6 * HZ * loops_per_jiffy) / 2^32
+ */
+
+#define	HZSCALE		(268435456 / (1000000/HZ))
+
+extern unsigned long loops_per_jiffy;
+
+static inline void _udelay(unsigned long usecs)
+{
+#if defined(CONFIG_M68328) || defined(CONFIG_M68EZ328) || \
+    defined(CONFIG_M68VZ328) || defined(CONFIG_M68360) || \
+    defined(CONFIG_COLDFIRE)
+	__delay((((usecs * HZSCALE) >> 11) * (loops_per_jiffy >> 11)) >> 6);
+#else
+	unsigned long tmp;
+
+	usecs *= 4295;		/* 2**32 / 1000000 */
+	__asm__ ("mulul %2,%0:%1"
+		: "=d" (usecs), "=d" (tmp)
+		: "d" (usecs), "1" (loops_per_jiffy*HZ));
+	__delay(usecs);
+#endif
+}
+
+/*
+ *	Moved the udelay() function into library code, no longer inlined.
+ *	I had to change the algorithm because we are overflowing now on
+ *	the faster ColdFire parts. The code is a little bigger, so it makes
+ *	sense to library it.
+ */
+extern void udelay(unsigned long usecs);
+
+#endif /* defined(_M68KNOMMU_DELAY_H) */
diff --git a/arch/m68knommu/include/asm/device.h b/arch/m68knommu/include/asm/device.h
new file mode 100644
index 00000000000..d8f9872b0e2
--- /dev/null
+++ b/arch/m68knommu/include/asm/device.h
@@ -0,0 +1,7 @@
+/*
+ * Arch specific extensions to struct device
+ *
+ * This file is released under the GPLv2
+ */
+#include <asm-generic/device.h>
+
diff --git a/arch/m68knommu/include/asm/div64.h b/arch/m68knommu/include/asm/div64.h
new file mode 100644
index 00000000000..6cd978cefb2
--- /dev/null
+++ b/arch/m68knommu/include/asm/div64.h
@@ -0,0 +1 @@
+#include <asm-generic/div64.h>
diff --git a/arch/m68knommu/include/asm/dma-mapping.h b/arch/m68knommu/include/asm/dma-mapping.h
new file mode 100644
index 00000000000..6aeab18e58b
--- /dev/null
+++ b/arch/m68knommu/include/asm/dma-mapping.h
@@ -0,0 +1,10 @@
+#ifndef _M68KNOMMU_DMA_MAPPING_H
+#define _M68KNOMMU_DMA_MAPPING_H
+
+#ifdef CONFIG_PCI
+#include <asm-generic/dma-mapping.h>
+#else
+#include <asm-generic/dma-mapping-broken.h>
+#endif
+
+#endif  /* _M68KNOMMU_DMA_MAPPING_H */
diff --git a/arch/m68knommu/include/asm/dma.h b/arch/m68knommu/include/asm/dma.h
new file mode 100644
index 00000000000..939a0205621
--- /dev/null
+++ b/arch/m68knommu/include/asm/dma.h
@@ -0,0 +1,494 @@
+#ifndef _M68K_DMA_H
+#define _M68K_DMA_H 1
+ 
+//#define	DMA_DEBUG	1
+
+
+#ifdef CONFIG_COLDFIRE
+/*
+ * ColdFire DMA Model:
+ *   ColdFire DMA supports two forms of DMA: Single and Dual address. Single
+ * address mode emits a source address, and expects that the device will either
+ * pick up the data (DMA READ) or source data (DMA WRITE). This implies that
+ * the device will place data on the correct byte(s) of the data bus, as the
+ * memory transactions are always 32 bits. This implies that only 32 bit
+ * devices will find single mode transfers useful. Dual address DMA mode
+ * performs two cycles: source read and destination write. ColdFire will
+ * align the data so that the device will always get the correct bytes, thus
+ * is useful for 8 and 16 bit devices. This is the mode that is supported
+ * below.
+ *
+ * AUG/22/2000 : added support for 32-bit Dual-Address-Mode (K) 2000 
+ *               Oliver Kamphenkel (O.Kamphenkel@tu-bs.de)
+ *
+ * AUG/25/2000 : addad support for 8, 16 and 32-bit Single-Address-Mode (K)2000
+ *               Oliver Kamphenkel (O.Kamphenkel@tu-bs.de)
+ *
+ * APR/18/2002 : added proper support for MCF5272 DMA controller.
+ *               Arthur Shipkowski (art@videon-central.com)
+ */
+
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfdma.h>
+
+/*
+ * Set number of channels of DMA on ColdFire for different implementations.
+ */
+#if defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407) || \
+	defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
+#define MAX_M68K_DMA_CHANNELS 4
+#elif defined(CONFIG_M5272)
+#define MAX_M68K_DMA_CHANNELS 1
+#elif defined(CONFIG_M532x)
+#define MAX_M68K_DMA_CHANNELS 0
+#else
+#define MAX_M68K_DMA_CHANNELS 2
+#endif
+
+extern unsigned int dma_base_addr[MAX_M68K_DMA_CHANNELS];
+extern unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS];
+
+#if !defined(CONFIG_M5272)
+#define DMA_MODE_WRITE_BIT  0x01  /* Memory/IO to IO/Memory select */
+#define DMA_MODE_WORD_BIT   0x02  /* 8 or 16 bit transfers */
+#define DMA_MODE_LONG_BIT   0x04  /* or 32 bit transfers */
+#define DMA_MODE_SINGLE_BIT 0x08  /* single-address-mode */
+
+/* I/O to memory, 8 bits, mode */
+#define DMA_MODE_READ	            0
+/* memory to I/O, 8 bits, mode */
+#define DMA_MODE_WRITE	            1
+/* I/O to memory, 16 bits, mode */
+#define DMA_MODE_READ_WORD          2
+/* memory to I/O, 16 bits, mode */
+#define DMA_MODE_WRITE_WORD         3
+/* I/O to memory, 32 bits, mode */
+#define DMA_MODE_READ_LONG          4
+/* memory to I/O, 32 bits, mode */
+#define DMA_MODE_WRITE_LONG         5
+/* I/O to memory, 8 bits, single-address-mode */     
+#define DMA_MODE_READ_SINGLE        8
+/* memory to I/O, 8 bits, single-address-mode */
+#define DMA_MODE_WRITE_SINGLE       9
+/* I/O to memory, 16 bits, single-address-mode */
+#define DMA_MODE_READ_WORD_SINGLE  10
+/* memory to I/O, 16 bits, single-address-mode */
+#define DMA_MODE_WRITE_WORD_SINGLE 11
+/* I/O to memory, 32 bits, single-address-mode */
+#define DMA_MODE_READ_LONG_SINGLE  12
+/* memory to I/O, 32 bits, single-address-mode */
+#define DMA_MODE_WRITE_LONG_SINGLE 13
+
+#else /* CONFIG_M5272 is defined */
+
+/* Source static-address mode */
+#define DMA_MODE_SRC_SA_BIT 0x01  
+/* Two bits to select between all four modes */
+#define DMA_MODE_SSIZE_MASK 0x06 
+/* Offset to shift bits in */
+#define DMA_MODE_SSIZE_OFF  0x01  
+/* Destination static-address mode */
+#define DMA_MODE_DES_SA_BIT 0x10  
+/* Two bits to select between all four modes */
+#define DMA_MODE_DSIZE_MASK 0x60  
+/* Offset to shift bits in */
+#define DMA_MODE_DSIZE_OFF  0x05
+/* Size modifiers */
+#define DMA_MODE_SIZE_LONG  0x00
+#define DMA_MODE_SIZE_BYTE  0x01
+#define DMA_MODE_SIZE_WORD  0x02
+#define DMA_MODE_SIZE_LINE  0x03
+
+/* 
+ * Aliases to help speed quick ports; these may be suboptimal, however. They
+ * do not include the SINGLE mode modifiers since the MCF5272 does not have a
+ * mode where the device is in control of its addressing.
+ */
+
+/* I/O to memory, 8 bits, mode */
+#define DMA_MODE_READ	              ((DMA_MODE_SIZE_BYTE << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_BYTE << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
+/* memory to I/O, 8 bits, mode */
+#define DMA_MODE_WRITE	            ((DMA_MODE_SIZE_BYTE << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_BYTE << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
+/* I/O to memory, 16 bits, mode */
+#define DMA_MODE_READ_WORD	        ((DMA_MODE_SIZE_WORD << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_WORD << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
+/* memory to I/O, 16 bits, mode */
+#define DMA_MODE_WRITE_WORD         ((DMA_MODE_SIZE_WORD << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_WORD << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
+/* I/O to memory, 32 bits, mode */
+#define DMA_MODE_READ_LONG	        ((DMA_MODE_SIZE_LONG << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_LONG << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
+/* memory to I/O, 32 bits, mode */
+#define DMA_MODE_WRITE_LONG         ((DMA_MODE_SIZE_LONG << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_LONG << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
+
+#endif /* !defined(CONFIG_M5272) */
+
+#if !defined(CONFIG_M5272)
+/* enable/disable a specific DMA channel */
+static __inline__ void enable_dma(unsigned int dmanr)
+{
+  volatile unsigned short *dmawp;
+
+#ifdef DMA_DEBUG
+  printk("enable_dma(dmanr=%d)\n", dmanr);
+#endif
+
+  dmawp = (unsigned short *) dma_base_addr[dmanr];
+  dmawp[MCFDMA_DCR] |= MCFDMA_DCR_EEXT;
+}
+
+static __inline__ void disable_dma(unsigned int dmanr)
+{
+  volatile unsigned short *dmawp;
+  volatile unsigned char  *dmapb;
+
+#ifdef DMA_DEBUG
+  printk("disable_dma(dmanr=%d)\n", dmanr);
+#endif
+
+  dmawp = (unsigned short *) dma_base_addr[dmanr];
+  dmapb = (unsigned char *) dma_base_addr[dmanr];
+
+  /* Turn off external requests, and stop any DMA in progress */
+  dmawp[MCFDMA_DCR] &= ~MCFDMA_DCR_EEXT;
+  dmapb[MCFDMA_DSR] = MCFDMA_DSR_DONE;
+}
+
+/*
+ * Clear the 'DMA Pointer Flip Flop'.
+ * Write 0 for LSB/MSB, 1 for MSB/LSB access.
+ * Use this once to initialize the FF to a known state.
+ * After that, keep track of it. :-)
+ * --- In order to do that, the DMA routines below should ---
+ * --- only be used while interrupts are disabled! ---
+ *
+ * This is a NOP for ColdFire. Provide a stub for compatibility.
+ */
+static __inline__ void clear_dma_ff(unsigned int dmanr)
+{
+}
+
+/* set mode (above) for a specific DMA channel */
+static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
+{
+
+  volatile unsigned char  *dmabp;
+  volatile unsigned short *dmawp;
+
+#ifdef DMA_DEBUG
+  printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode);
+#endif
+
+  dmabp = (unsigned char *) dma_base_addr[dmanr];
+  dmawp = (unsigned short *) dma_base_addr[dmanr];
+
+  // Clear config errors
+  dmabp[MCFDMA_DSR] = MCFDMA_DSR_DONE; 
+
+  // Set command register
+  dmawp[MCFDMA_DCR] =
+    MCFDMA_DCR_INT |         // Enable completion irq
+    MCFDMA_DCR_CS |          // Force one xfer per request
+    MCFDMA_DCR_AA |          // Enable auto alignment
+    // single-address-mode
+    ((mode & DMA_MODE_SINGLE_BIT) ? MCFDMA_DCR_SAA : 0) |
+    // sets s_rw (-> r/w) high if Memory to I/0
+    ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_S_RW : 0) |
+    // Memory to I/O or I/O to Memory
+    ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_SINC : MCFDMA_DCR_DINC) |
+    // 32 bit, 16 bit or 8 bit transfers
+    ((mode & DMA_MODE_WORD_BIT)  ? MCFDMA_DCR_SSIZE_WORD : 
+     ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_SSIZE_LONG :
+                                   MCFDMA_DCR_SSIZE_BYTE)) |
+    ((mode & DMA_MODE_WORD_BIT)  ? MCFDMA_DCR_DSIZE_WORD :
+     ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_DSIZE_LONG :
+                                   MCFDMA_DCR_DSIZE_BYTE));
+
+#ifdef DEBUG_DMA
+  printk("%s(%d): dmanr=%d DSR[%x]=%x DCR[%x]=%x\n", __FILE__, __LINE__,
+         dmanr, (int) &dmabp[MCFDMA_DSR], dmabp[MCFDMA_DSR],
+	 (int) &dmawp[MCFDMA_DCR], dmawp[MCFDMA_DCR]);
+#endif
+}
+
+/* Set transfer address for specific DMA channel */
+static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
+{
+  volatile unsigned short *dmawp;
+  volatile unsigned int   *dmalp;
+
+#ifdef DMA_DEBUG
+  printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a);
+#endif
+
+  dmawp = (unsigned short *) dma_base_addr[dmanr];
+  dmalp = (unsigned int *) dma_base_addr[dmanr];
+
+  // Determine which address registers are used for memory/device accesses
+  if (dmawp[MCFDMA_DCR] & MCFDMA_DCR_SINC) {
+    // Source incrementing, must be memory
+    dmalp[MCFDMA_SAR] = a;
+    // Set dest address, must be device
+    dmalp[MCFDMA_DAR] = dma_device_address[dmanr];
+  } else {
+    // Destination incrementing, must be memory
+    dmalp[MCFDMA_DAR] = a;
+    // Set source address, must be device
+    dmalp[MCFDMA_SAR] = dma_device_address[dmanr];
+  }
+
+#ifdef DEBUG_DMA
+  printk("%s(%d): dmanr=%d DCR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n",
+	__FILE__, __LINE__, dmanr, (int) &dmawp[MCFDMA_DCR], dmawp[MCFDMA_DCR],
+	(int) &dmalp[MCFDMA_SAR], dmalp[MCFDMA_SAR],
+	(int) &dmalp[MCFDMA_DAR], dmalp[MCFDMA_DAR]);
+#endif
+}
+
+/*
+ * Specific for Coldfire - sets device address.
+ * Should be called after the mode set call, and before set DMA address.
+ */
+static __inline__ void set_dma_device_addr(unsigned int dmanr, unsigned int a)
+{
+#ifdef DMA_DEBUG
+  printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a);
+#endif
+
+  dma_device_address[dmanr] = a;
+}
+
+/*
+ * NOTE 2: "count" represents _bytes_.
+ */
+static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
+{
+  volatile unsigned short *dmawp;
+
+#ifdef DMA_DEBUG
+  printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count);
+#endif
+
+  dmawp = (unsigned short *) dma_base_addr[dmanr];
+  dmawp[MCFDMA_BCR] = (unsigned short)count;
+}
+
+/*
+ * Get DMA residue count. After a DMA transfer, this
+ * should return zero. Reading this while a DMA transfer is
+ * still in progress will return unpredictable results.
+ * Otherwise, it returns the number of _bytes_ left to transfer.
+ */
+static __inline__ int get_dma_residue(unsigned int dmanr)
+{
+  volatile unsigned short *dmawp;
+  unsigned short count;
+
+#ifdef DMA_DEBUG
+  printk("get_dma_residue(dmanr=%d)\n", dmanr);
+#endif
+
+  dmawp = (unsigned short *) dma_base_addr[dmanr];
+  count = dmawp[MCFDMA_BCR];
+  return((int) count);
+}
+#else /* CONFIG_M5272 is defined */
+
+/*
+ * The MCF5272 DMA controller is very different than the controller defined above
+ * in terms of register mapping.  For instance, with the exception of the 16-bit 
+ * interrupt register (IRQ#85, for reference), all of the registers are 32-bit.
+ *
+ * The big difference, however, is the lack of device-requested DMA.  All modes
+ * are dual address transfer, and there is no 'device' setup or direction bit.
+ * You can DMA between a device and memory, between memory and memory, or even between
+ * two devices directly, with any combination of incrementing and non-incrementing
+ * addresses you choose.  This puts a crimp in distinguishing between the 'device 
+ * address' set up by set_dma_device_addr.
+ *
+ * Therefore, there are two options.  One is to use set_dma_addr and set_dma_device_addr,
+ * which will act exactly as above in -- it will look to see if the source is set to
+ * autoincrement, and if so it will make the source use the set_dma_addr value and the
+ * destination the set_dma_device_addr value.  Otherwise the source will be set to the
+ * set_dma_device_addr value and the destination will get the set_dma_addr value.
+ *
+ * The other is to use the provided set_dma_src_addr and set_dma_dest_addr functions
+ * and make it explicit.  Depending on what you're doing, one of these two should work
+ * for you, but don't mix them in the same transfer setup.
+ */
+
+/* enable/disable a specific DMA channel */
+static __inline__ void enable_dma(unsigned int dmanr)
+{
+  volatile unsigned int  *dmalp;
+
+#ifdef DMA_DEBUG
+  printk("enable_dma(dmanr=%d)\n", dmanr);
+#endif
+
+  dmalp = (unsigned int *) dma_base_addr[dmanr];
+  dmalp[MCFDMA_DMR] |= MCFDMA_DMR_EN;
+}
+
+static __inline__ void disable_dma(unsigned int dmanr)
+{
+  volatile unsigned int   *dmalp;
+
+#ifdef DMA_DEBUG
+  printk("disable_dma(dmanr=%d)\n", dmanr);
+#endif
+
+  dmalp = (unsigned int *) dma_base_addr[dmanr];
+
+  /* Turn off external requests, and stop any DMA in progress */
+  dmalp[MCFDMA_DMR] &= ~MCFDMA_DMR_EN;
+  dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET;
+}
+
+/*
+ * Clear the 'DMA Pointer Flip Flop'.
+ * Write 0 for LSB/MSB, 1 for MSB/LSB access.
+ * Use this once to initialize the FF to a known state.
+ * After that, keep track of it. :-)
+ * --- In order to do that, the DMA routines below should ---
+ * --- only be used while interrupts are disabled! ---
+ *
+ * This is a NOP for ColdFire. Provide a stub for compatibility.
+ */
+static __inline__ void clear_dma_ff(unsigned int dmanr)
+{
+}
+
+/* set mode (above) for a specific DMA channel */
+static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
+{
+
+  volatile unsigned int   *dmalp;
+  volatile unsigned short *dmawp;
+
+#ifdef DMA_DEBUG
+  printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode);
+#endif
+  dmalp = (unsigned int *) dma_base_addr[dmanr];
+  dmawp = (unsigned short *) dma_base_addr[dmanr];
+
+  // Clear config errors
+  dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET; 
+
+  // Set command register
+  dmalp[MCFDMA_DMR] =
+    MCFDMA_DMR_RQM_DUAL |         // Mandatory Request Mode setting
+    MCFDMA_DMR_DSTT_SD  |         // Set up addressing types; set to supervisor-data.
+    MCFDMA_DMR_SRCT_SD  |         // Set up addressing types; set to supervisor-data. 
+    // source static-address-mode
+    ((mode & DMA_MODE_SRC_SA_BIT) ? MCFDMA_DMR_SRCM_SA : MCFDMA_DMR_SRCM_IA) |
+    // dest static-address-mode
+    ((mode & DMA_MODE_DES_SA_BIT) ? MCFDMA_DMR_DSTM_SA : MCFDMA_DMR_DSTM_IA) |
+    // burst, 32 bit, 16 bit or 8 bit transfers are separately configurable on the MCF5272
+    (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_DSTS_OFF) |
+    (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_SRCS_OFF);
+    
+  dmawp[MCFDMA_DIR] |= MCFDMA_DIR_ASCEN;   /* Enable completion interrupts */
+  
+#ifdef DEBUG_DMA
+  printk("%s(%d): dmanr=%d DMR[%x]=%x DIR[%x]=%x\n", __FILE__, __LINE__,
+         dmanr, (int) &dmalp[MCFDMA_DMR], dmabp[MCFDMA_DMR],
+	 (int) &dmawp[MCFDMA_DIR], dmawp[MCFDMA_DIR]);
+#endif
+}
+
+/* Set transfer address for specific DMA channel */
+static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
+{
+  volatile unsigned int   *dmalp;
+
+#ifdef DMA_DEBUG
+  printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a);
+#endif
+
+  dmalp = (unsigned int *) dma_base_addr[dmanr];
+
+  // Determine which address registers are used for memory/device accesses
+  if (dmalp[MCFDMA_DMR] & MCFDMA_DMR_SRCM) {
+    // Source incrementing, must be memory
+    dmalp[MCFDMA_DSAR] = a;
+    // Set dest address, must be device
+    dmalp[MCFDMA_DDAR] = dma_device_address[dmanr];
+  } else {
+    // Destination incrementing, must be memory
+    dmalp[MCFDMA_DDAR] = a;
+    // Set source address, must be device
+    dmalp[MCFDMA_DSAR] = dma_device_address[dmanr];
+  }
+
+#ifdef DEBUG_DMA
+  printk("%s(%d): dmanr=%d DMR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n",
+	__FILE__, __LINE__, dmanr, (int) &dmawp[MCFDMA_DMR], dmawp[MCFDMA_DMR],
+	(int) &dmalp[MCFDMA_DSAR], dmalp[MCFDMA_DSAR],
+	(int) &dmalp[MCFDMA_DDAR], dmalp[MCFDMA_DDAR]);
+#endif
+}
+
+/*
+ * Specific for Coldfire - sets device address.
+ * Should be called after the mode set call, and before set DMA address.
+ */
+static __inline__ void set_dma_device_addr(unsigned int dmanr, unsigned int a)
+{
+#ifdef DMA_DEBUG
+  printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a);
+#endif
+
+  dma_device_address[dmanr] = a;
+}
+
+/*
+ * NOTE 2: "count" represents _bytes_.
+ *
+ * NOTE 3: While a 32-bit register, "count" is only a maximum 24-bit value.
+ */
+static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
+{
+  volatile unsigned int *dmalp;
+  
+#ifdef DMA_DEBUG
+  printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count);
+#endif
+
+  dmalp = (unsigned int *) dma_base_addr[dmanr];
+  dmalp[MCFDMA_DBCR] = count;
+}
+
+/*
+ * Get DMA residue count. After a DMA transfer, this
+ * should return zero. Reading this while a DMA transfer is
+ * still in progress will return unpredictable results.
+ * Otherwise, it returns the number of _bytes_ left to transfer.
+ */
+static __inline__ int get_dma_residue(unsigned int dmanr)
+{
+  volatile unsigned int *dmalp;
+  unsigned int count;
+
+#ifdef DMA_DEBUG
+  printk("get_dma_residue(dmanr=%d)\n", dmanr);
+#endif
+
+  dmalp = (unsigned int *) dma_base_addr[dmanr];
+  count = dmalp[MCFDMA_DBCR];
+  return(count);
+}
+
+#endif /* !defined(CONFIG_M5272) */
+#endif /* CONFIG_COLDFIRE */
+ 
+#define MAX_DMA_CHANNELS 8
+
+/* Don't define MAX_DMA_ADDRESS; it's useless on the m68k/coldfire and any
+   occurrence should be flagged as an error.  */
+/* under 2.4 it is actually needed by the new bootmem allocator */
+#define MAX_DMA_ADDRESS PAGE_OFFSET
+
+/* These are in kernel/dma.c: */
+extern int request_dma(unsigned int dmanr, const char *device_id);	/* reserve a DMA channel */
+extern void free_dma(unsigned int dmanr);	/* release it again */
+ 
+#endif /* _M68K_DMA_H */
diff --git a/arch/m68knommu/include/asm/elf.h b/arch/m68knommu/include/asm/elf.h
new file mode 100644
index 00000000000..27f0ec70fba
--- /dev/null
+++ b/arch/m68knommu/include/asm/elf.h
@@ -0,0 +1,110 @@
+#ifndef __ASMm68k_ELF_H
+#define __ASMm68k_ELF_H
+
+/*
+ * ELF register definitions..
+ */
+
+#include <asm/ptrace.h>
+#include <asm/user.h>
+
+/*
+ * 68k ELF relocation types
+ */
+#define R_68K_NONE  0
+#define R_68K_32    1
+#define R_68K_16    2
+#define R_68K_8     3
+#define R_68K_PC32  4
+#define R_68K_PC16  5
+#define R_68K_PC8   6
+#define R_68K_GOT32 7
+#define R_68K_GOT16 8
+#define R_68K_GOT8  9
+#define R_68K_GOT32O    10
+#define R_68K_GOT16O    11
+#define R_68K_GOT8O 12
+#define R_68K_PLT32 13
+#define R_68K_PLT16 14
+#define R_68K_PLT8  15
+#define R_68K_PLT32O    16
+#define R_68K_PLT16O    17
+#define R_68K_PLT8O 18
+#define R_68K_COPY  19
+#define R_68K_GLOB_DAT  20
+#define R_68K_JMP_SLOT  21
+#define R_68K_RELATIVE  22
+
+typedef unsigned long elf_greg_t;
+
+#define ELF_NGREG (sizeof(struct user_regs_struct) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef struct user_m68kfp_struct elf_fpregset_t;
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) ((x)->e_machine == EM_68K)
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS	ELFCLASS32
+#define ELF_DATA	ELFDATA2MSB
+#define ELF_ARCH	EM_68K
+
+/* For SVR4/m68k the function pointer to be registered with `atexit' is
+   passed in %a1.  Although my copy of the ABI has no such statement, it
+   is actually used on ASV.  */
+#define ELF_PLAT_INIT(_r, load_addr)	_r->a1 = 0
+
+#define USE_ELF_CORE_DUMP
+#define ELF_EXEC_PAGESIZE	4096
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+   use of this is to invoke "./ld.so someprog" to test out a new version of
+   the loader.  We need to make sure that it is out of the way of the program
+   that it will "exec", and that there is sufficient room for the brk.  */
+
+#define ELF_ET_DYN_BASE         0xD0000000UL
+
+#define ELF_CORE_COPY_REGS(pr_reg, regs)				\
+	/* Bleech. */							\
+	pr_reg[0] = regs->d1;						\
+	pr_reg[1] = regs->d2;						\
+	pr_reg[2] = regs->d3;						\
+	pr_reg[3] = regs->d4;						\
+	pr_reg[4] = regs->d5;						\
+	pr_reg[7] = regs->a0;						\
+	pr_reg[8] = regs->a1;						\
+	pr_reg[14] = regs->d0;						\
+	pr_reg[15] = rdusp();						\
+	pr_reg[16] = 0 /* regs->orig_d0 */;				\
+	pr_reg[17] = regs->sr;						\
+	pr_reg[18] = regs->pc;						\
+	/* pr_reg[19] = (regs->format << 12) | regs->vector; */		\
+	{								\
+	  struct switch_stack *sw = ((struct switch_stack *)regs) - 1;	\
+	  pr_reg[5] = sw->d6;						\
+	  pr_reg[6] = sw->d7;						\
+	  pr_reg[10] = sw->a3;						\
+	  pr_reg[11] = sw->a4;						\
+	  pr_reg[12] = sw->a5;						\
+	  pr_reg[13] = sw->a6;						\
+	}
+
+/* This yields a mask that user programs can use to figure out what
+   instruction set this cpu supports.  */
+
+#define ELF_HWCAP	(0)
+
+/* This yields a string that ld.so will use to load implementation
+   specific libraries for optimization.  This is more specific in
+   intent than poking at uname or /proc/cpuinfo.  */
+
+#define ELF_PLATFORM  (NULL)
+
+#define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX)
+
+#endif
diff --git a/arch/m68knommu/include/asm/elia.h b/arch/m68knommu/include/asm/elia.h
new file mode 100644
index 00000000000..e037d4e2de3
--- /dev/null
+++ b/arch/m68knommu/include/asm/elia.h
@@ -0,0 +1,41 @@
+/****************************************************************************/
+
+/*
+ *	elia.h -- Lineo (formerly Moreton Bay) eLIA platform support.
+ *
+ *	(C) Copyright 1999-2000, Moreton Bay (www.moreton.com.au)
+ *	(C) Copyright 1999-2000, Lineo (www.lineo.com)
+ */
+
+/****************************************************************************/
+#ifndef	elia_h
+#define	elia_h
+/****************************************************************************/
+
+#include <asm/coldfire.h>
+
+#ifdef CONFIG_eLIA
+
+/*
+ *	The serial port DTR and DCD lines are also on the Parallel I/O
+ *	as well, so define those too.
+ */
+
+#define	eLIA_DCD1		0x0001
+#define	eLIA_DCD0		0x0002
+#define	eLIA_DTR1		0x0004
+#define	eLIA_DTR0		0x0008
+
+#define	eLIA_PCIRESET		0x0020
+
+/*
+ *	Kernel macros to set and unset the LEDs.
+ */
+#ifndef __ASSEMBLY__
+extern unsigned short	ppdata;
+#endif /* __ASSEMBLY__ */
+
+#endif	/* CONFIG_eLIA */
+
+/****************************************************************************/
+#endif	/* elia_h */
diff --git a/arch/m68knommu/include/asm/emergency-restart.h b/arch/m68knommu/include/asm/emergency-restart.h
new file mode 100644
index 00000000000..108d8c48e42
--- /dev/null
+++ b/arch/m68knommu/include/asm/emergency-restart.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_EMERGENCY_RESTART_H
+#define _ASM_EMERGENCY_RESTART_H
+
+#include <asm-generic/emergency-restart.h>
+
+#endif /* _ASM_EMERGENCY_RESTART_H */
diff --git a/arch/m68knommu/include/asm/entry.h b/arch/m68knommu/include/asm/entry.h
new file mode 100644
index 00000000000..c2553d26273
--- /dev/null
+++ b/arch/m68knommu/include/asm/entry.h
@@ -0,0 +1,182 @@
+#ifndef __M68KNOMMU_ENTRY_H
+#define __M68KNOMMU_ENTRY_H
+
+#include <asm/setup.h>
+#include <asm/page.h>
+
+/*
+ * Stack layout in 'ret_from_exception':
+ *
+ * This allows access to the syscall arguments in registers d1-d5
+ *
+ *	 0(sp) - d1
+ *	 4(sp) - d2
+ *	 8(sp) - d3
+ *	 C(sp) - d4
+ *	10(sp) - d5
+ *	14(sp) - a0
+ *	18(sp) - a1
+ *	1C(sp) - a2
+ *	20(sp) - d0
+ *	24(sp) - orig_d0
+ *	28(sp) - stack adjustment
+ *	2C(sp) - [ sr              ] [ format & vector ]
+ *	2E(sp) - [ pc-hiword       ] [ sr              ]
+ *	30(sp) - [ pc-loword       ] [ pc-hiword       ]
+ *	32(sp) - [ format & vector ] [ pc-loword       ]
+ *		  ^^^^^^^^^^^^^^^^^   ^^^^^^^^^^^^^^^^^
+ *			M68K		  COLDFIRE
+ */
+
+#define ALLOWINT 0xf8ff
+
+#ifdef __ASSEMBLY__
+
+/* process bits for task_struct.flags */
+PF_TRACESYS_OFF = 3
+PF_TRACESYS_BIT = 5
+PF_PTRACED_OFF = 3
+PF_PTRACED_BIT = 4
+PF_DTRACE_OFF = 1
+PF_DTRACE_BIT = 5
+
+LENOSYS = 38
+
+#define SWITCH_STACK_SIZE (6*4+4)	/* Includes return address */
+
+/*
+ * This defines the normal kernel pt-regs layout.
+ *
+ * regs are a2-a6 and d6-d7 preserved by C code
+ * the kernel doesn't mess with usp unless it needs to
+ */
+
+#ifdef CONFIG_COLDFIRE
+/*
+ * This is made a little more tricky on the ColdFire. There is no
+ * separate kernel and user stack pointers. Need to artificially
+ * construct a usp in software... When doing this we need to disable
+ * interrupts, otherwise bad things could happen.
+ */
+.macro SAVE_ALL
+	move	#0x2700,%sr		/* disable intrs */
+	btst	#5,%sp@(2)		/* from user? */
+	bnes	6f			/* no, skip */
+	movel	%sp,sw_usp		/* save user sp */
+	addql	#8,sw_usp		/* remove exception */
+	movel	sw_ksp,%sp		/* kernel sp */
+	subql	#8,%sp			/* room for exception */
+	clrl	%sp@-			/* stkadj */
+	movel	%d0,%sp@-		/* orig d0 */
+	movel	%d0,%sp@-		/* d0 */
+	lea	%sp@(-32),%sp		/* space for 8 regs */
+	moveml	%d1-%d5/%a0-%a2,%sp@
+	movel	sw_usp,%a0		/* get usp */
+	movel	%a0@-,%sp@(PT_PC)	/* copy exception program counter */
+	movel	%a0@-,%sp@(PT_FORMATVEC)/* copy exception format/vector/sr */
+	bra	7f
+	6:
+	clrl	%sp@-			/* stkadj */
+	movel	%d0,%sp@-		/* orig d0 */
+	movel	%d0,%sp@-		/* d0 */
+	lea	%sp@(-32),%sp		/* space for 8 regs */
+	moveml	%d1-%d5/%a0-%a2,%sp@
+	7:
+.endm
+
+.macro RESTORE_ALL
+	btst	#5,%sp@(PT_SR)		/* going user? */
+	bnes	8f			/* no, skip */
+	move	#0x2700,%sr		/* disable intrs */
+	movel	sw_usp,%a0		/* get usp */
+	movel	%sp@(PT_PC),%a0@-	/* copy exception program counter */
+	movel	%sp@(PT_FORMATVEC),%a0@-/* copy exception format/vector/sr */
+	moveml	%sp@,%d1-%d5/%a0-%a2
+	lea	%sp@(32),%sp		/* space for 8 regs */
+	movel	%sp@+,%d0
+	addql	#4,%sp			/* orig d0 */
+	addl	%sp@+,%sp		/* stkadj */
+	addql	#8,%sp			/* remove exception */
+	movel	%sp,sw_ksp		/* save ksp */
+	subql	#8,sw_usp		/* set exception */
+	movel	sw_usp,%sp		/* restore usp */
+	rte
+	8:
+	moveml	%sp@,%d1-%d5/%a0-%a2
+	lea	%sp@(32),%sp		/* space for 8 regs */
+	movel	%sp@+,%d0
+	addql	#4,%sp			/* orig d0 */
+	addl	%sp@+,%sp		/* stkadj */
+	rte
+.endm
+
+/*
+ * Quick exception save, use current stack only.
+ */
+.macro SAVE_LOCAL
+	move	#0x2700,%sr		/* disable intrs */
+	clrl	%sp@-			/* stkadj */
+	movel	%d0,%sp@-		/* orig d0 */
+	movel	%d0,%sp@-		/* d0 */
+	lea	%sp@(-32),%sp		/* space for 8 regs */
+	moveml	%d1-%d5/%a0-%a2,%sp@
+.endm
+
+.macro RESTORE_LOCAL
+	moveml	%sp@,%d1-%d5/%a0-%a2
+	lea	%sp@(32),%sp		/* space for 8 regs */
+	movel	%sp@+,%d0
+	addql	#4,%sp			/* orig d0 */
+	addl	%sp@+,%sp		/* stkadj */
+	rte
+.endm
+
+.macro SAVE_SWITCH_STACK
+	lea	%sp@(-24),%sp		/* 6 regs */
+	moveml	%a3-%a6/%d6-%d7,%sp@
+.endm
+
+.macro RESTORE_SWITCH_STACK
+	moveml	%sp@,%a3-%a6/%d6-%d7
+	lea	%sp@(24),%sp		/* 6 regs */
+.endm
+
+/*
+ * Software copy of the user and kernel stack pointers... Ugh...
+ * Need these to get around ColdFire not having separate kernel
+ * and user stack pointers.
+ */
+.globl sw_usp
+.globl sw_ksp
+
+#else /* !CONFIG_COLDFIRE */
+
+/*
+ * Standard 68k interrupt entry and exit macros.
+ */
+.macro SAVE_ALL
+	clrl	%sp@-			/* stkadj */
+	movel	%d0,%sp@-		/* orig d0 */
+	movel	%d0,%sp@-		/* d0 */
+	moveml	%d1-%d5/%a0-%a2,%sp@-
+.endm
+
+.macro RESTORE_ALL
+	moveml	%sp@+,%a0-%a2/%d1-%d5
+	movel	%sp@+,%d0
+	addql	#4,%sp			/* orig d0 */
+	addl	%sp@+,%sp		/* stkadj */
+	rte
+.endm
+
+.macro SAVE_SWITCH_STACK
+	moveml	%a3-%a6/%d6-%d7,%sp@-
+.endm
+
+.macro RESTORE_SWITCH_STACK
+	moveml	%sp@+,%a3-%a6/%d6-%d7
+.endm
+
+#endif /* !CONFIG_COLDFIRE */
+#endif /* __ASSEMBLY__ */
+#endif /* __M68KNOMMU_ENTRY_H */
diff --git a/arch/m68knommu/include/asm/errno.h b/arch/m68knommu/include/asm/errno.h
new file mode 100644
index 00000000000..7e8c22b9a5e
--- /dev/null
+++ b/arch/m68knommu/include/asm/errno.h
@@ -0,0 +1 @@
+#include <asm-m68k/errno.h>
diff --git a/arch/m68knommu/include/asm/fb.h b/arch/m68knommu/include/asm/fb.h
new file mode 100644
index 00000000000..c7df3803099
--- /dev/null
+++ b/arch/m68knommu/include/asm/fb.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_FB_H_
+#define _ASM_FB_H_
+#include <linux/fb.h>
+
+#define fb_pgprotect(...) do {} while (0)
+
+static inline int fb_is_primary_device(struct fb_info *info)
+{
+	return 0;
+}
+
+#endif /* _ASM_FB_H_ */
diff --git a/arch/m68knommu/include/asm/fcntl.h b/arch/m68knommu/include/asm/fcntl.h
new file mode 100644
index 00000000000..f6a552cda4c
--- /dev/null
+++ b/arch/m68knommu/include/asm/fcntl.h
@@ -0,0 +1 @@
+#include <asm-m68k/fcntl.h>
diff --git a/arch/m68knommu/include/asm/flat.h b/arch/m68knommu/include/asm/flat.h
new file mode 100644
index 00000000000..814b5174a8e
--- /dev/null
+++ b/arch/m68knommu/include/asm/flat.h
@@ -0,0 +1,17 @@
+/*
+ * include/asm-m68knommu/flat.h -- uClinux flat-format executables
+ */
+
+#ifndef __M68KNOMMU_FLAT_H__
+#define __M68KNOMMU_FLAT_H__
+
+#define	flat_stack_align(sp)			/* nothing needed */
+#define	flat_argvp_envp_on_stack()		1
+#define	flat_old_ram_flag(flags)		(flags)
+#define	flat_reloc_valid(reloc, size)		((reloc) <= (size))
+#define	flat_get_addr_from_rp(rp, relval, flags, p)	get_unaligned(rp)
+#define	flat_put_addr_at_rp(rp, val, relval)	put_unaligned(val,rp)
+#define	flat_get_relocate_addr(rel)		(rel)
+#define	flat_set_persistent(relval, p)		0
+
+#endif /* __M68KNOMMU_FLAT_H__ */
diff --git a/arch/m68knommu/include/asm/fpu.h b/arch/m68knommu/include/asm/fpu.h
new file mode 100644
index 00000000000..b16b2e4fca2
--- /dev/null
+++ b/arch/m68knommu/include/asm/fpu.h
@@ -0,0 +1,21 @@
+#ifndef __M68KNOMMU_FPU_H
+#define __M68KNOMMU_FPU_H
+
+
+/*
+ * MAX floating point unit state size (FSAVE/FRESTORE)
+ */
+#if defined(CONFIG_M68020) || defined(CONFIG_M68030)
+#define FPSTATESIZE (216/sizeof(unsigned char))
+#elif defined(CONFIG_M68040)
+#define FPSTATESIZE (96/sizeof(unsigned char))
+#elif defined(CONFIG_M68KFPU_EMU)
+#define FPSTATESIZE (28/sizeof(unsigned char))
+#elif defined(CONFIG_M68060)
+#define FPSTATESIZE (12/sizeof(unsigned char))
+#else
+/* Assume no FP unit present then... */
+#define FPSTATESIZE (2) /* dummy size */
+#endif
+
+#endif /* __M68K_FPU_H */
diff --git a/arch/m68knommu/include/asm/futex.h b/arch/m68knommu/include/asm/futex.h
new file mode 100644
index 00000000000..6a332a9f099
--- /dev/null
+++ b/arch/m68knommu/include/asm/futex.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_FUTEX_H
+#define _ASM_FUTEX_H
+
+#include <asm-generic/futex.h>
+
+#endif
diff --git a/arch/m68knommu/include/asm/hardirq.h b/arch/m68knommu/include/asm/hardirq.h
new file mode 100644
index 00000000000..bfad28149a4
--- /dev/null
+++ b/arch/m68knommu/include/asm/hardirq.h
@@ -0,0 +1,27 @@
+#ifndef __M68K_HARDIRQ_H
+#define __M68K_HARDIRQ_H
+
+#include <linux/cache.h>
+#include <linux/threads.h>
+#include <asm/irq.h>
+
+typedef struct {
+	unsigned int __softirq_pending;
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
+
+#define HARDIRQ_BITS	8
+
+/*
+ * The hardirq mask has to be large enough to have
+ * space for potentially all IRQ sources in the system
+ * nesting on a single CPU:
+ */
+#if (1 << HARDIRQ_BITS) < NR_IRQS
+# error HARDIRQ_BITS is too low!
+#endif
+
+void ack_bad_irq(unsigned int irq);
+
+#endif /* __M68K_HARDIRQ_H */
diff --git a/arch/m68knommu/include/asm/hw_irq.h b/arch/m68knommu/include/asm/hw_irq.h
new file mode 100644
index 00000000000..f3ec9e5ae04
--- /dev/null
+++ b/arch/m68knommu/include/asm/hw_irq.h
@@ -0,0 +1,4 @@
+#ifndef __M68KNOMMU_HW_IRQ_H__
+#define __M68KNOMMU_HW_IRQ_H__
+
+#endif /* __M68KNOMMU_HW_IRQ_H__ */
diff --git a/arch/m68knommu/include/asm/hwtest.h b/arch/m68knommu/include/asm/hwtest.h
new file mode 100644
index 00000000000..700626a1b1b
--- /dev/null
+++ b/arch/m68knommu/include/asm/hwtest.h
@@ -0,0 +1 @@
+#include <asm-m68k/hwtest.h>
diff --git a/arch/m68knommu/include/asm/io.h b/arch/m68knommu/include/asm/io.h
new file mode 100644
index 00000000000..6adef1ee208
--- /dev/null
+++ b/arch/m68knommu/include/asm/io.h
@@ -0,0 +1,194 @@
+#ifndef _M68KNOMMU_IO_H
+#define _M68KNOMMU_IO_H
+
+#ifdef __KERNEL__
+
+
+/*
+ * These are for ISA/PCI shared memory _only_ and should never be used
+ * on any other type of memory, including Zorro memory. They are meant to
+ * access the bus in the bus byte order which is little-endian!.
+ *
+ * readX/writeX() are used to access memory mapped devices. On some
+ * architectures the memory mapped IO stuff needs to be accessed
+ * differently. On the m68k architecture, we just read/write the
+ * memory location directly.
+ */
+/* ++roman: The assignments to temp. vars avoid that gcc sometimes generates
+ * two accesses to memory, which may be undesireable for some devices.
+ */
+
+/*
+ * swap functions are sometimes needed to interface little-endian hardware
+ */
+static inline unsigned short _swapw(volatile unsigned short v)
+{
+    return ((v << 8) | (v >> 8));
+}
+
+static inline unsigned int _swapl(volatile unsigned long v)
+{
+    return ((v << 24) | ((v & 0xff00) << 8) | ((v & 0xff0000) >> 8) | (v >> 24));
+}
+
+#define readb(addr) \
+    ({ unsigned char __v = (*(volatile unsigned char *) (addr)); __v; })
+#define readw(addr) \
+    ({ unsigned short __v = (*(volatile unsigned short *) (addr)); __v; })
+#define readl(addr) \
+    ({ unsigned int __v = (*(volatile unsigned int *) (addr)); __v; })
+
+#define readb_relaxed(addr) readb(addr)
+#define readw_relaxed(addr) readw(addr)
+#define readl_relaxed(addr) readl(addr)
+
+#define writeb(b,addr) (void)((*(volatile unsigned char *) (addr)) = (b))
+#define writew(b,addr) (void)((*(volatile unsigned short *) (addr)) = (b))
+#define writel(b,addr) (void)((*(volatile unsigned int *) (addr)) = (b))
+
+#define __raw_readb readb
+#define __raw_readw readw
+#define __raw_readl readl
+#define __raw_writeb writeb
+#define __raw_writew writew
+#define __raw_writel writel
+
+static inline void io_outsb(unsigned int addr, void *buf, int len)
+{
+	volatile unsigned char *ap = (volatile unsigned char *) addr;
+	unsigned char *bp = (unsigned char *) buf;
+	while (len--)
+		*ap = *bp++;
+}
+
+static inline void io_outsw(unsigned int addr, void *buf, int len)
+{
+	volatile unsigned short *ap = (volatile unsigned short *) addr;
+	unsigned short *bp = (unsigned short *) buf;
+	while (len--)
+		*ap = _swapw(*bp++);
+}
+
+static inline void io_outsl(unsigned int addr, void *buf, int len)
+{
+	volatile unsigned int *ap = (volatile unsigned int *) addr;
+	unsigned int *bp = (unsigned int *) buf;
+	while (len--)
+		*ap = _swapl(*bp++);
+}
+
+static inline void io_insb(unsigned int addr, void *buf, int len)
+{
+	volatile unsigned char *ap = (volatile unsigned char *) addr;
+	unsigned char *bp = (unsigned char *) buf;
+	while (len--)
+		*bp++ = *ap;
+}
+
+static inline void io_insw(unsigned int addr, void *buf, int len)
+{
+	volatile unsigned short *ap = (volatile unsigned short *) addr;
+	unsigned short *bp = (unsigned short *) buf;
+	while (len--)
+		*bp++ = _swapw(*ap);
+}
+
+static inline void io_insl(unsigned int addr, void *buf, int len)
+{
+	volatile unsigned int *ap = (volatile unsigned int *) addr;
+	unsigned int *bp = (unsigned int *) buf;
+	while (len--)
+		*bp++ = _swapl(*ap);
+}
+
+#define mmiowb()
+
+/*
+ *	make the short names macros so specific devices
+ *	can override them as required
+ */
+
+#define memset_io(a,b,c)	memset((void *)(a),(b),(c))
+#define memcpy_fromio(a,b,c)	memcpy((a),(void *)(b),(c))
+#define memcpy_toio(a,b,c)	memcpy((void *)(a),(b),(c))
+
+#define inb(addr)    readb(addr)
+#define inw(addr)    readw(addr)
+#define inl(addr)    readl(addr)
+#define outb(x,addr) ((void) writeb(x,addr))
+#define outw(x,addr) ((void) writew(x,addr))
+#define outl(x,addr) ((void) writel(x,addr))
+
+#define inb_p(addr)    inb(addr)
+#define inw_p(addr)    inw(addr)
+#define inl_p(addr)    inl(addr)
+#define outb_p(x,addr) outb(x,addr)
+#define outw_p(x,addr) outw(x,addr)
+#define outl_p(x,addr) outl(x,addr)
+
+#define outsb(a,b,l) io_outsb(a,b,l)
+#define outsw(a,b,l) io_outsw(a,b,l)
+#define outsl(a,b,l) io_outsl(a,b,l)
+
+#define insb(a,b,l) io_insb(a,b,l)
+#define insw(a,b,l) io_insw(a,b,l)
+#define insl(a,b,l) io_insl(a,b,l)
+
+#define IO_SPACE_LIMIT 0xffff
+
+
+/* Values for nocacheflag and cmode */
+#define IOMAP_FULL_CACHING		0
+#define IOMAP_NOCACHE_SER		1
+#define IOMAP_NOCACHE_NONSER		2
+#define IOMAP_WRITETHROUGH		3
+
+extern void *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag);
+extern void __iounmap(void *addr, unsigned long size);
+
+static inline void *ioremap(unsigned long physaddr, unsigned long size)
+{
+	return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
+}
+static inline void *ioremap_nocache(unsigned long physaddr, unsigned long size)
+{
+	return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
+}
+static inline void *ioremap_writethrough(unsigned long physaddr, unsigned long size)
+{
+	return __ioremap(physaddr, size, IOMAP_WRITETHROUGH);
+}
+static inline void *ioremap_fullcache(unsigned long physaddr, unsigned long size)
+{
+	return __ioremap(physaddr, size, IOMAP_FULL_CACHING);
+}
+
+extern void iounmap(void *addr);
+
+/* Pages to physical address... */
+#define page_to_phys(page)      ((page - mem_map) << PAGE_SHIFT)
+#define page_to_bus(page)       ((page - mem_map) << PAGE_SHIFT)
+
+/*
+ * Macros used for converting between virtual and physical mappings.
+ */
+#define phys_to_virt(vaddr)	((void *) (vaddr))
+#define virt_to_phys(vaddr)	((unsigned long) (vaddr))
+
+#define virt_to_bus virt_to_phys
+#define bus_to_virt phys_to_virt
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p)	__va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)	p
+
+#endif /* __KERNEL__ */
+
+#endif /* _M68KNOMMU_IO_H */
diff --git a/arch/m68knommu/include/asm/ioctl.h b/arch/m68knommu/include/asm/ioctl.h
new file mode 100644
index 00000000000..b279fe06dfe
--- /dev/null
+++ b/arch/m68knommu/include/asm/ioctl.h
@@ -0,0 +1 @@
+#include <asm-generic/ioctl.h>
diff --git a/arch/m68knommu/include/asm/ioctls.h b/arch/m68knommu/include/asm/ioctls.h
new file mode 100644
index 00000000000..0b1eb4d8505
--- /dev/null
+++ b/arch/m68knommu/include/asm/ioctls.h
@@ -0,0 +1 @@
+#include <asm-m68k/ioctls.h>
diff --git a/arch/m68knommu/include/asm/ipcbuf.h b/arch/m68knommu/include/asm/ipcbuf.h
new file mode 100644
index 00000000000..e4a7be6dd70
--- /dev/null
+++ b/arch/m68knommu/include/asm/ipcbuf.h
@@ -0,0 +1 @@
+#include <asm-m68k/ipcbuf.h>
diff --git a/arch/m68knommu/include/asm/irq.h b/arch/m68knommu/include/asm/irq.h
new file mode 100644
index 00000000000..9373c31ac87
--- /dev/null
+++ b/arch/m68knommu/include/asm/irq.h
@@ -0,0 +1,26 @@
+#ifndef _M68KNOMMU_IRQ_H_
+#define _M68KNOMMU_IRQ_H_
+
+#ifdef CONFIG_COLDFIRE
+/*
+ * On the ColdFire we keep track of all vectors. That way drivers
+ * can register whatever vector number they wish, and we can deal
+ * with it.
+ */
+#define	SYS_IRQS	256
+#define	NR_IRQS		SYS_IRQS
+
+#else
+
+/*
+ * # of m68k interrupts
+ */
+#define SYS_IRQS	8
+#define NR_IRQS		(24 + SYS_IRQS)
+
+#endif /* CONFIG_COLDFIRE */
+
+
+#define irq_canonicalize(irq)	(irq)
+
+#endif /* _M68KNOMMU_IRQ_H_ */
diff --git a/arch/m68knommu/include/asm/irq_regs.h b/arch/m68knommu/include/asm/irq_regs.h
new file mode 100644
index 00000000000..3dd9c0b7027
--- /dev/null
+++ b/arch/m68knommu/include/asm/irq_regs.h
@@ -0,0 +1 @@
+#include <asm-generic/irq_regs.h>
diff --git a/arch/m68knommu/include/asm/kdebug.h b/arch/m68knommu/include/asm/kdebug.h
new file mode 100644
index 00000000000..6ece1b03766
--- /dev/null
+++ b/arch/m68knommu/include/asm/kdebug.h
@@ -0,0 +1 @@
+#include <asm-generic/kdebug.h>
diff --git a/arch/m68knommu/include/asm/kmap_types.h b/arch/m68knommu/include/asm/kmap_types.h
new file mode 100644
index 00000000000..bfb6707575d
--- /dev/null
+++ b/arch/m68knommu/include/asm/kmap_types.h
@@ -0,0 +1,21 @@
+#ifndef __ASM_M68K_KMAP_TYPES_H
+#define __ASM_M68K_KMAP_TYPES_H
+
+enum km_type {
+	KM_BOUNCE_READ,
+	KM_SKB_SUNRPC_DATA,
+	KM_SKB_DATA_SOFTIRQ,
+	KM_USER0,
+	KM_USER1,
+	KM_BIO_SRC_IRQ,
+	KM_BIO_DST_IRQ,
+	KM_PTE0,
+	KM_PTE1,
+	KM_IRQ0,
+	KM_IRQ1,
+	KM_SOFTIRQ0,
+	KM_SOFTIRQ1,
+	KM_TYPE_NR
+};
+
+#endif
diff --git a/arch/m68knommu/include/asm/linkage.h b/arch/m68knommu/include/asm/linkage.h
new file mode 100644
index 00000000000..c288a19ff48
--- /dev/null
+++ b/arch/m68knommu/include/asm/linkage.h
@@ -0,0 +1 @@
+#include <asm-m68k/linkage.h>
diff --git a/arch/m68knommu/include/asm/local.h b/arch/m68knommu/include/asm/local.h
new file mode 100644
index 00000000000..84a39c1b86f
--- /dev/null
+++ b/arch/m68knommu/include/asm/local.h
@@ -0,0 +1,6 @@
+#ifndef __M68KNOMMU_LOCAL_H
+#define __M68KNOMMU_LOCAL_H
+
+#include <asm-generic/local.h>
+
+#endif /* __M68KNOMMU_LOCAL_H */
diff --git a/arch/m68knommu/include/asm/m5206sim.h b/arch/m68knommu/include/asm/m5206sim.h
new file mode 100644
index 00000000000..7e3594dea88
--- /dev/null
+++ b/arch/m68knommu/include/asm/m5206sim.h
@@ -0,0 +1,131 @@
+/****************************************************************************/
+
+/*
+ *	m5206sim.h -- ColdFire 5206 System Integration Module support.
+ *
+ *	(C) Copyright 1999, Greg Ungerer (gerg@snapgear.com)
+ * 	(C) Copyright 2000, Lineo Inc. (www.lineo.com) 
+ */
+
+/****************************************************************************/
+#ifndef	m5206sim_h
+#define	m5206sim_h
+/****************************************************************************/
+
+
+/*
+ *	Define the 5206 SIM register set addresses.
+ */
+#define	MCFSIM_SIMR		0x03		/* SIM Config reg (r/w) */
+#define	MCFSIM_ICR1		0x14		/* Intr Ctrl reg 1 (r/w) */
+#define	MCFSIM_ICR2		0x15		/* Intr Ctrl reg 2 (r/w) */
+#define	MCFSIM_ICR3		0x16		/* Intr Ctrl reg 3 (r/w) */
+#define	MCFSIM_ICR4		0x17		/* Intr Ctrl reg 4 (r/w) */
+#define	MCFSIM_ICR5		0x18		/* Intr Ctrl reg 5 (r/w) */
+#define	MCFSIM_ICR6		0x19		/* Intr Ctrl reg 6 (r/w) */
+#define	MCFSIM_ICR7		0x1a		/* Intr Ctrl reg 7 (r/w) */
+#define	MCFSIM_ICR8		0x1b		/* Intr Ctrl reg 8 (r/w) */
+#define	MCFSIM_ICR9		0x1c		/* Intr Ctrl reg 9 (r/w) */
+#define	MCFSIM_ICR10		0x1d		/* Intr Ctrl reg 10 (r/w) */
+#define	MCFSIM_ICR11		0x1e		/* Intr Ctrl reg 11 (r/w) */
+#define	MCFSIM_ICR12		0x1f		/* Intr Ctrl reg 12 (r/w) */
+#define	MCFSIM_ICR13		0x20		/* Intr Ctrl reg 13 (r/w) */
+#ifdef CONFIG_M5206e
+#define	MCFSIM_ICR14		0x21		/* Intr Ctrl reg 14 (r/w) */
+#define	MCFSIM_ICR15		0x22		/* Intr Ctrl reg 15 (r/w) */
+#endif
+
+#define MCFSIM_IMR		0x36		/* Interrupt Mask reg (r/w) */
+#define MCFSIM_IPR		0x3a		/* Interrupt Pend reg (r/w) */
+
+#define	MCFSIM_RSR		0x40		/* Reset Status reg (r/w) */
+#define	MCFSIM_SYPCR		0x41		/* System Protection reg (r/w)*/
+
+#define	MCFSIM_SWIVR		0x42		/* SW Watchdog intr reg (r/w) */
+#define	MCFSIM_SWSR		0x43		/* SW Watchdog service (r/w) */
+
+#define	MCFSIM_DCRR		0x46		/* DRAM Refresh reg (r/w) */
+#define	MCFSIM_DCTR		0x4a		/* DRAM Timing reg (r/w) */
+#define	MCFSIM_DAR0		0x4c		/* DRAM 0 Address reg(r/w) */
+#define	MCFSIM_DMR0		0x50		/* DRAM 0 Mask reg (r/w) */
+#define	MCFSIM_DCR0		0x57		/* DRAM 0 Control reg (r/w) */
+#define	MCFSIM_DAR1		0x58		/* DRAM 1 Address reg (r/w) */
+#define	MCFSIM_DMR1		0x5c		/* DRAM 1 Mask reg (r/w) */
+#define	MCFSIM_DCR1		0x63		/* DRAM 1 Control reg (r/w) */
+
+#define	MCFSIM_CSAR0		0x64		/* CS 0 Address 0 reg (r/w) */
+#define	MCFSIM_CSMR0		0x68		/* CS 0 Mask 0 reg (r/w) */
+#define	MCFSIM_CSCR0		0x6e		/* CS 0 Control reg (r/w) */
+#define	MCFSIM_CSAR1		0x70		/* CS 1 Address reg (r/w) */
+#define	MCFSIM_CSMR1		0x74		/* CS 1 Mask reg (r/w) */
+#define	MCFSIM_CSCR1		0x7a		/* CS 1 Control reg (r/w) */
+#define	MCFSIM_CSAR2		0x7c		/* CS 2 Address reg (r/w) */
+#define	MCFSIM_CSMR2		0x80		/* CS 2 Mask reg (r/w) */
+#define	MCFSIM_CSCR2		0x86		/* CS 2 Control reg (r/w) */
+#define	MCFSIM_CSAR3		0x88		/* CS 3 Address reg (r/w) */
+#define	MCFSIM_CSMR3		0x8c		/* CS 3 Mask reg (r/w) */
+#define	MCFSIM_CSCR3		0x92		/* CS 3 Control reg (r/w) */
+#define	MCFSIM_CSAR4		0x94		/* CS 4 Address reg (r/w) */
+#define	MCFSIM_CSMR4		0x98		/* CS 4 Mask reg (r/w) */
+#define	MCFSIM_CSCR4		0x9e		/* CS 4 Control reg (r/w) */
+#define	MCFSIM_CSAR5		0xa0		/* CS 5 Address reg (r/w) */
+#define	MCFSIM_CSMR5		0xa4		/* CS 5 Mask reg (r/w) */
+#define	MCFSIM_CSCR5		0xaa		/* CS 5 Control reg (r/w) */
+#define	MCFSIM_CSAR6		0xac		/* CS 6 Address reg (r/w) */
+#define	MCFSIM_CSMR6		0xb0		/* CS 6 Mask reg (r/w) */
+#define	MCFSIM_CSCR6		0xb6		/* CS 6 Control reg (r/w) */
+#define	MCFSIM_CSAR7		0xb8		/* CS 7 Address reg (r/w) */
+#define	MCFSIM_CSMR7		0xbc		/* CS 7 Mask reg (r/w) */
+#define	MCFSIM_CSCR7		0xc2		/* CS 7 Control reg (r/w) */
+#define	MCFSIM_DMCR		0xc6		/* Default control */
+
+#ifdef CONFIG_M5206e
+#define	MCFSIM_PAR		0xca		/* Pin Assignment reg (r/w) */
+#else
+#define	MCFSIM_PAR		0xcb		/* Pin Assignment reg (r/w) */
+#endif
+
+#define	MCFSIM_PADDR		0x1c5		/* Parallel Direction (r/w) */
+#define	MCFSIM_PADAT		0x1c9		/* Parallel Port Value (r/w) */
+
+/*
+ *	Some symbol defines for the Parallel Port Pin Assignment Register
+ */
+#ifdef CONFIG_M5206e
+#define MCFSIM_PAR_DREQ0        0x100           /* Set to select DREQ0 input */
+                                                /* Clear to select T0 input */
+#define MCFSIM_PAR_DREQ1        0x200           /* Select DREQ1 input */
+                                                /* Clear to select T0 output */
+#endif
+
+/*
+ *	Some symbol defines for the Interrupt Control Register
+ */
+#define	MCFSIM_SWDICR		MCFSIM_ICR8	/* Watchdog timer ICR */
+#define	MCFSIM_TIMER1ICR	MCFSIM_ICR9	/* Timer 1 ICR */
+#define	MCFSIM_TIMER2ICR	MCFSIM_ICR10	/* Timer 2 ICR */
+#define	MCFSIM_UART1ICR		MCFSIM_ICR12	/* UART 1 ICR */
+#define	MCFSIM_UART2ICR		MCFSIM_ICR13	/* UART 2 ICR */
+#ifdef CONFIG_M5206e
+#define	MCFSIM_DMA1ICR		MCFSIM_ICR14	/* DMA 1 ICR */
+#define	MCFSIM_DMA2ICR		MCFSIM_ICR15	/* DMA 2 ICR */
+#endif
+
+#if defined(CONFIG_M5206e)
+#define	MCFSIM_IMR_MASKALL	0xfffe		/* All SIM intr sources */
+#endif
+
+/*
+ *	Macro to get and set IMR register. It is 16 bits on the 5206.
+ */
+#define	mcf_getimr()		\
+	*((volatile unsigned short *) (MCF_MBAR + MCFSIM_IMR))
+
+#define	mcf_setimr(imr)		\
+	*((volatile unsigned short *) (MCF_MBAR + MCFSIM_IMR)) = (imr)
+
+#define	mcf_getipr()		\
+	*((volatile unsigned short *) (MCF_MBAR + MCFSIM_IPR))
+
+/****************************************************************************/
+#endif	/* m5206sim_h */
diff --git a/arch/m68knommu/include/asm/m520xsim.h b/arch/m68knommu/include/asm/m520xsim.h
new file mode 100644
index 00000000000..49d016e6391
--- /dev/null
+++ b/arch/m68knommu/include/asm/m520xsim.h
@@ -0,0 +1,63 @@
+/****************************************************************************/
+
+/*
+ *  m520xsim.h -- ColdFire 5207/5208 System Integration Module support.
+ *
+ *  (C) Copyright 2005, Intec Automation (mike@steroidmicros.com)
+ */
+
+/****************************************************************************/
+#ifndef m520xsim_h
+#define m520xsim_h
+/****************************************************************************/
+
+
+/*
+ *  Define the 5282 SIM register set addresses.
+ */
+#define MCFICM_INTC0        0x48000     /* Base for Interrupt Ctrl 0 */
+#define MCFINTC_IPRH        0x00        /* Interrupt pending 32-63 */
+#define MCFINTC_IPRL        0x04        /* Interrupt pending 1-31 */
+#define MCFINTC_IMRH        0x08        /* Interrupt mask 32-63 */
+#define MCFINTC_IMRL        0x0c        /* Interrupt mask 1-31 */
+#define MCFINTC_INTFRCH     0x10        /* Interrupt force 32-63 */
+#define MCFINTC_INTFRCL     0x14        /* Interrupt force 1-31 */
+#define MCFINTC_ICR0        0x40        /* Base ICR register */
+
+#define MCFINT_VECBASE      64
+#define MCFINT_UART0        26          /* Interrupt number for UART0 */
+#define MCFINT_UART1        27          /* Interrupt number for UART1 */
+#define MCFINT_UART2        28          /* Interrupt number for UART2 */
+#define MCFINT_QSPI         31          /* Interrupt number for QSPI */
+#define MCFINT_PIT1         4           /* Interrupt number for PIT1 (PIT0 in processor) */
+
+/*
+ *  SDRAM configuration registers.
+ */
+#define MCFSIM_SDMR         0x000a8000	/* SDRAM Mode/Extended Mode Register */
+#define MCFSIM_SDCR         0x000a8004	/* SDRAM Control Register */
+#define MCFSIM_SDCFG1       0x000a8008	/* SDRAM Configuration Register 1 */
+#define MCFSIM_SDCFG2       0x000a800c	/* SDRAM Configuration Register 2 */
+#define MCFSIM_SDCS0        0x000a8110	/* SDRAM Chip Select 0 Configuration */
+#define MCFSIM_SDCS1        0x000a8114	/* SDRAM Chip Select 1 Configuration */
+
+
+#define MCF_GPIO_PAR_UART                   (0xA4036)
+#define MCF_GPIO_PAR_FECI2C                 (0xA4033)
+#define MCF_GPIO_PAR_FEC                    (0xA4038)
+
+#define MCF_GPIO_PAR_UART_PAR_URXD0         (0x0001)
+#define MCF_GPIO_PAR_UART_PAR_UTXD0         (0x0002)
+
+#define MCF_GPIO_PAR_UART_PAR_URXD1         (0x0040)
+#define MCF_GPIO_PAR_UART_PAR_UTXD1         (0x0080)
+
+#define MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2   (0x02)
+#define MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2   (0x04)
+
+#define ICR_INTRCONF		0x05
+#define MCFPIT_IMR		MCFINTC_IMRL
+#define MCFPIT_IMR_IBIT		(1 << MCFINT_PIT1)
+
+/****************************************************************************/
+#endif  /* m520xsim_h */
diff --git a/arch/m68knommu/include/asm/m523xsim.h b/arch/m68knommu/include/asm/m523xsim.h
new file mode 100644
index 00000000000..bf397313e93
--- /dev/null
+++ b/arch/m68knommu/include/asm/m523xsim.h
@@ -0,0 +1,45 @@
+/****************************************************************************/
+
+/*
+ *	m523xsim.h -- ColdFire 523x System Integration Module support.
+ *
+ *	(C) Copyright 2003-2005, Greg Ungerer <gerg@snapgear.com>
+ */
+
+/****************************************************************************/
+#ifndef	m523xsim_h
+#define	m523xsim_h
+/****************************************************************************/
+
+
+/*
+ *	Define the 523x SIM register set addresses.
+ */
+#define	MCFICM_INTC0		0x0c00		/* Base for Interrupt Ctrl 0 */
+#define	MCFICM_INTC1		0x0d00		/* Base for Interrupt Ctrl 0 */
+#define	MCFINTC_IPRH		0x00		/* Interrupt pending 32-63 */
+#define	MCFINTC_IPRL		0x04		/* Interrupt pending 1-31 */
+#define	MCFINTC_IMRH		0x08		/* Interrupt mask 32-63 */
+#define	MCFINTC_IMRL		0x0c		/* Interrupt mask 1-31 */
+#define	MCFINTC_INTFRCH		0x10		/* Interrupt force 32-63 */
+#define	MCFINTC_INTFRCL		0x14		/* Interrupt force 1-31 */
+#define	MCFINTC_IRLR		0x18		/* */
+#define	MCFINTC_IACKL		0x19		/* */
+#define	MCFINTC_ICR0		0x40		/* Base ICR register */
+
+#define	MCFINT_VECBASE		64		/* Vector base number */
+#define	MCFINT_UART0		13		/* Interrupt number for UART0 */
+#define	MCFINT_PIT1		36		/* Interrupt number for PIT1 */
+#define MCFINT_QSPI		18		/* Interrupt number for QSPI */
+
+/*
+ *	SDRAM configuration registers.
+ */
+#define	MCFSIM_DCR		0x44		/* SDRAM control */
+#define	MCFSIM_DACR0		0x48		/* SDRAM base address 0 */
+#define	MCFSIM_DMR0		0x4c		/* SDRAM address mask 0 */
+#define	MCFSIM_DACR1		0x50		/* SDRAM base address 1 */
+#define	MCFSIM_DMR1		0x54		/* SDRAM address mask 1 */
+
+/****************************************************************************/
+#endif	/* m523xsim_h */
diff --git a/arch/m68knommu/include/asm/m5249sim.h b/arch/m68knommu/include/asm/m5249sim.h
new file mode 100644
index 00000000000..366eb8602d2
--- /dev/null
+++ b/arch/m68knommu/include/asm/m5249sim.h
@@ -0,0 +1,209 @@
+/****************************************************************************/
+
+/*
+ *	m5249sim.h -- ColdFire 5249 System Integration Module support.
+ *
+ *	(C) Copyright 2002, Greg Ungerer (gerg@snapgear.com)
+ */
+
+/****************************************************************************/
+#ifndef	m5249sim_h
+#define	m5249sim_h
+/****************************************************************************/
+
+/*
+ *	Define the 5249 SIM register set addresses.
+ */
+#define	MCFSIM_RSR		0x00		/* Reset Status reg (r/w) */
+#define	MCFSIM_SYPCR		0x01		/* System Protection reg (r/w)*/
+#define	MCFSIM_SWIVR		0x02		/* SW Watchdog intr reg (r/w) */
+#define	MCFSIM_SWSR		0x03		/* SW Watchdog service (r/w) */
+#define	MCFSIM_PAR		0x04		/* Pin Assignment reg (r/w) */
+#define	MCFSIM_IRQPAR		0x06		/* Interrupt Assignment reg (r/w) */
+#define	MCFSIM_MPARK		0x0C		/* BUS Master Control Reg*/
+#define	MCFSIM_IPR		0x40		/* Interrupt Pend reg (r/w) */
+#define	MCFSIM_IMR		0x44		/* Interrupt Mask reg (r/w) */
+#define	MCFSIM_AVR		0x4b		/* Autovector Ctrl reg (r/w) */
+#define	MCFSIM_ICR0		0x4c		/* Intr Ctrl reg 0 (r/w) */
+#define	MCFSIM_ICR1		0x4d		/* Intr Ctrl reg 1 (r/w) */
+#define	MCFSIM_ICR2		0x4e		/* Intr Ctrl reg 2 (r/w) */
+#define	MCFSIM_ICR3		0x4f		/* Intr Ctrl reg 3 (r/w) */
+#define	MCFSIM_ICR4		0x50		/* Intr Ctrl reg 4 (r/w) */
+#define	MCFSIM_ICR5		0x51		/* Intr Ctrl reg 5 (r/w) */
+#define	MCFSIM_ICR6		0x52		/* Intr Ctrl reg 6 (r/w) */
+#define	MCFSIM_ICR7		0x53		/* Intr Ctrl reg 7 (r/w) */
+#define	MCFSIM_ICR8		0x54		/* Intr Ctrl reg 8 (r/w) */
+#define	MCFSIM_ICR9		0x55		/* Intr Ctrl reg 9 (r/w) */
+#define	MCFSIM_ICR10		0x56		/* Intr Ctrl reg 10 (r/w) */
+#define	MCFSIM_ICR11		0x57		/* Intr Ctrl reg 11 (r/w) */
+
+#define MCFSIM_CSAR0		0x80		/* CS 0 Address 0 reg (r/w) */
+#define MCFSIM_CSMR0		0x84		/* CS 0 Mask 0 reg (r/w) */
+#define MCFSIM_CSCR0		0x8a		/* CS 0 Control reg (r/w) */
+#define MCFSIM_CSAR1		0x8c		/* CS 1 Address reg (r/w) */
+#define MCFSIM_CSMR1		0x90		/* CS 1 Mask reg (r/w) */
+#define MCFSIM_CSCR1		0x96		/* CS 1 Control reg (r/w) */
+#define MCFSIM_CSAR2		0x98		/* CS 2 Address reg (r/w) */
+#define MCFSIM_CSMR2		0x9c		/* CS 2 Mask reg (r/w) */
+#define MCFSIM_CSCR2		0xa2		/* CS 2 Control reg (r/w) */
+#define MCFSIM_CSAR3		0xa4		/* CS 3 Address reg (r/w) */
+#define MCFSIM_CSMR3		0xa8		/* CS 3 Mask reg (r/w) */
+#define MCFSIM_CSCR3		0xae		/* CS 3 Control reg (r/w) */
+
+#define MCFSIM_DCR		0x100		/* DRAM Control reg (r/w) */
+#define MCFSIM_DACR0		0x108		/* DRAM 0 Addr and Ctrl (r/w) */
+#define MCFSIM_DMR0		0x10c		/* DRAM 0 Mask reg (r/w) */
+#define MCFSIM_DACR1		0x110		/* DRAM 1 Addr and Ctrl (r/w) */
+#define MCFSIM_DMR1		0x114		/* DRAM 1 Mask reg (r/w) */
+
+
+/*
+ *	Some symbol defines for the above...
+ */
+#define	MCFSIM_SWDICR		MCFSIM_ICR0	/* Watchdog timer ICR */
+#define	MCFSIM_TIMER1ICR	MCFSIM_ICR1	/* Timer 1 ICR */
+#define	MCFSIM_TIMER2ICR	MCFSIM_ICR2	/* Timer 2 ICR */
+#define	MCFSIM_UART1ICR		MCFSIM_ICR4	/* UART 1 ICR */
+#define	MCFSIM_UART2ICR		MCFSIM_ICR5	/* UART 2 ICR */
+#define	MCFSIM_DMA0ICR		MCFSIM_ICR6	/* DMA 0 ICR */
+#define	MCFSIM_DMA1ICR		MCFSIM_ICR7	/* DMA 1 ICR */
+#define	MCFSIM_DMA2ICR		MCFSIM_ICR8	/* DMA 2 ICR */
+#define	MCFSIM_DMA3ICR		MCFSIM_ICR9	/* DMA 3 ICR */
+
+/*
+ *	General purpose IO registers (in MBAR2).
+ */
+#define	MCFSIM2_GPIOREAD	0x0		/* GPIO read values */
+#define	MCFSIM2_GPIOWRITE	0x4		/* GPIO write values */
+#define	MCFSIM2_GPIOENABLE	0x8		/* GPIO enabled */
+#define	MCFSIM2_GPIOFUNC	0xc		/* GPIO function */
+#define	MCFSIM2_GPIO1READ	0xb0		/* GPIO1 read values */
+#define	MCFSIM2_GPIO1WRITE	0xb4		/* GPIO1 write values */
+#define	MCFSIM2_GPIO1ENABLE	0xb8		/* GPIO1 enabled */
+#define	MCFSIM2_GPIO1FUNC	0xbc		/* GPIO1 function */
+
+#define	MCFSIM2_GPIOINTSTAT	0xc0		/* GPIO interrupt status */
+#define	MCFSIM2_GPIOINTCLEAR	0xc0		/* GPIO interrupt clear */
+#define	MCFSIM2_GPIOINTENABLE	0xc4		/* GPIO interrupt enable */
+
+#define	MCFSIM2_INTLEVEL1	0x140		/* Interrupt level reg 1 */
+#define	MCFSIM2_INTLEVEL2	0x144		/* Interrupt level reg 2 */
+#define	MCFSIM2_INTLEVEL3	0x148		/* Interrupt level reg 3 */
+#define	MCFSIM2_INTLEVEL4	0x14c		/* Interrupt level reg 4 */
+#define	MCFSIM2_INTLEVEL5	0x150		/* Interrupt level reg 5 */
+#define	MCFSIM2_INTLEVEL6	0x154		/* Interrupt level reg 6 */
+#define	MCFSIM2_INTLEVEL7	0x158		/* Interrupt level reg 7 */
+#define	MCFSIM2_INTLEVEL8	0x15c		/* Interrupt level reg 8 */
+
+#define	MCFSIM2_DMAROUTE	0x188		/* DMA routing */
+
+#define	MCFSIM2_IDECONFIG1	0x18c		/* IDEconfig1 */
+#define	MCFSIM2_IDECONFIG2	0x190		/* IDEconfig2 */
+
+
+/*
+ *	Macro to set IMR register. It is 32 bits on the 5249.
+ */
+#define	MCFSIM_IMR_MASKALL	0x7fffe		/* All SIM intr sources */
+
+#define	mcf_getimr()		\
+	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR))
+
+#define	mcf_setimr(imr)		\
+	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr);
+
+#define	mcf_getipr()		\
+	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR))
+
+/****************************************************************************/
+
+#ifdef __ASSEMBLER__
+
+/*
+ *	The M5249C3 board needs a little help getting all its SIM devices
+ *	initialized at kernel start time. dBUG doesn't set much up, so
+ *	we need to do it manually.
+ */
+.macro m5249c3_setup
+	/*
+	 *	Set MBAR1 and MBAR2, just incase they are not set.
+	 */
+	movel	#0x10000001,%a0
+	movec	%a0,%MBAR			/* map MBAR region */
+	subql	#1,%a0				/* get MBAR address in a0 */
+
+	movel	#0x80000001,%a1
+	movec	%a1,#3086			/* map MBAR2 region */
+	subql	#1,%a1				/* get MBAR2 address in a1 */
+
+	/*
+	 *      Move secondary interrupts to base at 128.
+	 */
+	moveb	#0x80,%d0
+	moveb	%d0,0x16b(%a1)			/* interrupt base register */
+
+	/*
+	 *      Work around broken CSMR0/DRAM vector problem.
+	 */
+	movel	#0x001F0021,%d0			/* disable C/I bit */
+	movel	%d0,0x84(%a0)			/* set CSMR0 */
+
+	/*
+	 *	Disable the PLL firstly. (Who knows what state it is
+	 *	in here!).
+	 */
+	movel	0x180(%a1),%d0			/* get current PLL value */
+	andl	#0xfffffffe,%d0			/* PLL bypass first */
+	movel	%d0,0x180(%a1)			/* set PLL register */
+	nop
+
+#if CONFIG_CLOCK_FREQ == 140000000
+	/*
+	 *	Set initial clock frequency. This assumes M5249C3 board
+	 *	is fitted with 11.2896MHz crystal. It will program the
+	 *	PLL for 140MHz. Lets go fast :-)
+	 */
+	movel	#0x125a40f0,%d0			/* set for 140MHz */
+	movel	%d0,0x180(%a1)			/* set PLL register */
+	orl	#0x1,%d0
+	movel	%d0,0x180(%a1)			/* set PLL register */
+#endif
+
+	/*
+	 *	Setup CS1 for ethernet controller.
+	 *	(Setup as per M5249C3 doco).
+	 */
+	movel  #0xe0000000,%d0			/* CS1 mapped at 0xe0000000 */
+	movel  %d0,0x8c(%a0)
+	movel  #0x001f0021,%d0			/* CS1 size of 1Mb */
+	movel  %d0,0x90(%a0)
+	movew  #0x0080,%d0			/* CS1 = 16bit port, AA */
+	movew  %d0,0x96(%a0)
+
+	/*
+	 *	Setup CS2 for IDE interface.
+	 */
+	movel	#0x50000000,%d0			/* CS2 mapped at 0x50000000 */
+	movel	%d0,0x98(%a0)
+	movel	#0x001f0001,%d0			/* CS2 size of 1MB */
+	movel	%d0,0x9c(%a0)
+	movew	#0x0080,%d0			/* CS2 = 16bit, TA */
+	movew	%d0,0xa2(%a0)
+
+	movel	#0x00107000,%d0			/* IDEconfig1 */
+	movel	%d0,0x18c(%a1)
+	movel	#0x000c0400,%d0			/* IDEconfig2 */
+	movel	%d0,0x190(%a1)
+
+	movel	#0x00080000,%d0			/* GPIO19, IDE reset bit */
+	orl	%d0,0xc(%a1)			/* function GPIO19 */
+	orl	%d0,0x8(%a1)			/* enable GPIO19 as output */
+        orl	%d0,0x4(%a1)			/* de-assert IDE reset */
+.endm
+
+#define	PLATFORM_SETUP	m5249c3_setup
+
+#endif /* __ASSEMBLER__ */
+
+/****************************************************************************/
+#endif	/* m5249sim_h */
diff --git a/arch/m68knommu/include/asm/m5272sim.h b/arch/m68knommu/include/asm/m5272sim.h
new file mode 100644
index 00000000000..6217edc2113
--- /dev/null
+++ b/arch/m68knommu/include/asm/m5272sim.h
@@ -0,0 +1,78 @@
+/****************************************************************************/
+
+/*
+ *	m5272sim.h -- ColdFire 5272 System Integration Module support.
+ *
+ *	(C) Copyright 1999, Greg Ungerer (gerg@snapgear.com)
+ * 	(C) Copyright 2000, Lineo Inc. (www.lineo.com) 
+ */
+
+/****************************************************************************/
+#ifndef	m5272sim_h
+#define	m5272sim_h
+/****************************************************************************/
+
+
+/*
+ *	Define the 5272 SIM register set addresses.
+ */
+#define	MCFSIM_SCR		0x04		/* SIM Config reg (r/w) */
+#define	MCFSIM_SPR		0x06		/* System Protection reg (r/w)*/
+#define	MCFSIM_PMR		0x08		/* Power Management reg (r/w) */
+#define	MCFSIM_APMR		0x0e		/* Active Low Power reg (r/w) */
+#define	MCFSIM_DIR		0x10		/* Device Identity reg (r/w) */
+
+#define	MCFSIM_ICR1		0x20		/* Intr Ctrl reg 1 (r/w) */
+#define	MCFSIM_ICR2		0x24		/* Intr Ctrl reg 2 (r/w) */
+#define	MCFSIM_ICR3		0x28		/* Intr Ctrl reg 3 (r/w) */
+#define	MCFSIM_ICR4		0x2c		/* Intr Ctrl reg 4 (r/w) */
+
+#define MCFSIM_ISR		0x30		/* Interrupt Source reg (r/w) */
+#define MCFSIM_PITR		0x34		/* Interrupt Transition (r/w) */
+#define	MCFSIM_PIWR		0x38		/* Interrupt Wakeup reg (r/w) */
+#define	MCFSIM_PIVR		0x3f		/* Interrupt Vector reg (r/w( */
+
+#define	MCFSIM_WRRR		0x280		/* Watchdog reference (r/w) */
+#define	MCFSIM_WIRR		0x284		/* Watchdog interrupt (r/w) */
+#define	MCFSIM_WCR		0x288		/* Watchdog counter (r/w) */
+#define	MCFSIM_WER		0x28c		/* Watchdog event (r/w) */
+
+#define	MCFSIM_CSBR0		0x40		/* CS0 Base Address (r/w) */
+#define	MCFSIM_CSOR0		0x44		/* CS0 Option (r/w) */
+#define	MCFSIM_CSBR1		0x48		/* CS1 Base Address (r/w) */
+#define	MCFSIM_CSOR1		0x4c		/* CS1 Option (r/w) */
+#define	MCFSIM_CSBR2		0x50		/* CS2 Base Address (r/w) */
+#define	MCFSIM_CSOR2		0x54		/* CS2 Option (r/w) */
+#define	MCFSIM_CSBR3		0x58		/* CS3 Base Address (r/w) */
+#define	MCFSIM_CSOR3		0x5c		/* CS3 Option (r/w) */
+#define	MCFSIM_CSBR4		0x60		/* CS4 Base Address (r/w) */
+#define	MCFSIM_CSOR4		0x64		/* CS4 Option (r/w) */
+#define	MCFSIM_CSBR5		0x68		/* CS5 Base Address (r/w) */
+#define	MCFSIM_CSOR5		0x6c		/* CS5 Option (r/w) */
+#define	MCFSIM_CSBR6		0x70		/* CS6 Base Address (r/w) */
+#define	MCFSIM_CSOR6		0x74		/* CS6 Option (r/w) */
+#define	MCFSIM_CSBR7		0x78		/* CS7 Base Address (r/w) */
+#define	MCFSIM_CSOR7		0x7c		/* CS7 Option (r/w) */
+
+#define	MCFSIM_SDCR		0x180		/* SDRAM Configuration (r/w) */
+#define	MCFSIM_SDTR		0x184		/* SDRAM Timing (r/w) */
+#define	MCFSIM_DCAR0		0x4c		/* DRAM 0 Address reg(r/w) */
+#define	MCFSIM_DCMR0		0x50		/* DRAM 0 Mask reg (r/w) */
+#define	MCFSIM_DCCR0		0x57		/* DRAM 0 Control reg (r/w) */
+#define	MCFSIM_DCAR1		0x58		/* DRAM 1 Address reg (r/w) */
+#define	MCFSIM_DCMR1		0x5c		/* DRAM 1 Mask reg (r/w) */
+#define	MCFSIM_DCCR1		0x63		/* DRAM 1 Control reg (r/w) */
+
+#define	MCFSIM_PACNT		0x80		/* Port A Control (r/w) */
+#define	MCFSIM_PADDR		0x84		/* Port A Direction (r/w) */
+#define	MCFSIM_PADAT		0x86		/* Port A Data (r/w) */
+#define	MCFSIM_PBCNT		0x88		/* Port B Control (r/w) */
+#define	MCFSIM_PBDDR		0x8c		/* Port B Direction (r/w) */
+#define	MCFSIM_PBDAT		0x8e		/* Port B Data (r/w) */
+#define	MCFSIM_PCDDR		0x94		/* Port C Direction (r/w) */
+#define	MCFSIM_PCDAT		0x96		/* Port C Data (r/w) */
+#define	MCFSIM_PDCNT		0x98		/* Port D Control (r/w) */
+
+
+/****************************************************************************/
+#endif	/* m5272sim_h */
diff --git a/arch/m68knommu/include/asm/m527xsim.h b/arch/m68knommu/include/asm/m527xsim.h
new file mode 100644
index 00000000000..1f63ab3fb3e
--- /dev/null
+++ b/arch/m68knommu/include/asm/m527xsim.h
@@ -0,0 +1,74 @@
+/****************************************************************************/
+
+/*
+ *	m527xsim.h -- ColdFire 5270/5271 System Integration Module support.
+ *
+ *	(C) Copyright 2004, Greg Ungerer (gerg@snapgear.com)
+ */
+
+/****************************************************************************/
+#ifndef	m527xsim_h
+#define	m527xsim_h
+/****************************************************************************/
+
+
+/*
+ *	Define the 5270/5271 SIM register set addresses.
+ */
+#define	MCFICM_INTC0		0x0c00		/* Base for Interrupt Ctrl 0 */
+#define	MCFICM_INTC1		0x0d00		/* Base for Interrupt Ctrl 1 */
+#define	MCFINTC_IPRH		0x00		/* Interrupt pending 32-63 */
+#define	MCFINTC_IPRL		0x04		/* Interrupt pending 1-31 */
+#define	MCFINTC_IMRH		0x08		/* Interrupt mask 32-63 */
+#define	MCFINTC_IMRL		0x0c		/* Interrupt mask 1-31 */
+#define	MCFINTC_INTFRCH		0x10		/* Interrupt force 32-63 */
+#define	MCFINTC_INTFRCL		0x14		/* Interrupt force 1-31 */
+#define	MCFINTC_IRLR		0x18		/* */
+#define	MCFINTC_IACKL		0x19		/* */
+#define	MCFINTC_ICR0		0x40		/* Base ICR register */
+
+#define	MCFINT_VECBASE		64		/* Vector base number */
+#define	MCFINT_UART0		13		/* Interrupt number for UART0 */
+#define	MCFINT_UART1		14		/* Interrupt number for UART1 */
+#define	MCFINT_UART2		15		/* Interrupt number for UART2 */
+#define	MCFINT_PIT1		36		/* Interrupt number for PIT1 */
+
+/*
+ *	SDRAM configuration registers.
+ */
+#ifdef CONFIG_M5271
+#define	MCFSIM_DCR		0x40		/* SDRAM control */
+#define	MCFSIM_DACR0		0x48		/* SDRAM base address 0 */
+#define	MCFSIM_DMR0		0x4c		/* SDRAM address mask 0 */
+#define	MCFSIM_DACR1		0x50		/* SDRAM base address 1 */
+#define	MCFSIM_DMR1		0x54		/* SDRAM address mask 1 */
+#endif
+#ifdef CONFIG_M5275
+#define	MCFSIM_DMR		0x40		/* SDRAM mode */
+#define	MCFSIM_DCR		0x44		/* SDRAM control */
+#define	MCFSIM_DCFG1		0x48		/* SDRAM configuration 1 */
+#define	MCFSIM_DCFG2		0x4c		/* SDRAM configuration 2 */
+#define	MCFSIM_DBAR0		0x50		/* SDRAM base address 0 */
+#define	MCFSIM_DMR0		0x54		/* SDRAM address mask 0 */
+#define	MCFSIM_DBAR1		0x58		/* SDRAM base address 1 */
+#define	MCFSIM_DMR1		0x5c		/* SDRAM address mask 1 */
+#endif
+
+/*
+ *	GPIO pins setups to enable the UARTs.
+ */
+#ifdef CONFIG_M5271
+#define MCF_GPIO_PAR_UART	0x100048	/* PAR UART address */
+#define UART0_ENABLE_MASK	0x000f
+#define UART1_ENABLE_MASK	0x0ff0
+#define UART2_ENABLE_MASK	0x3000
+#endif
+#ifdef CONFIG_M5275
+#define MCF_GPIO_PAR_UART	0x10007c	/* PAR UART address */
+#define UART0_ENABLE_MASK	0x000f
+#define UART1_ENABLE_MASK	0x00f0
+#define UART2_ENABLE_MASK	0x3f00 
+#endif
+
+/****************************************************************************/
+#endif	/* m527xsim_h */
diff --git a/arch/m68knommu/include/asm/m528xsim.h b/arch/m68knommu/include/asm/m528xsim.h
new file mode 100644
index 00000000000..28bf783a5d6
--- /dev/null
+++ b/arch/m68knommu/include/asm/m528xsim.h
@@ -0,0 +1,159 @@
+/****************************************************************************/
+
+/*
+ *	m528xsim.h -- ColdFire 5280/5282 System Integration Module support.
+ *
+ *	(C) Copyright 2003, Greg Ungerer (gerg@snapgear.com)
+ */
+
+/****************************************************************************/
+#ifndef	m528xsim_h
+#define	m528xsim_h
+/****************************************************************************/
+
+
+/*
+ *	Define the 5280/5282 SIM register set addresses.
+ */
+#define	MCFICM_INTC0		0x0c00		/* Base for Interrupt Ctrl 0 */
+#define	MCFICM_INTC1		0x0d00		/* Base for Interrupt Ctrl 0 */
+#define	MCFINTC_IPRH		0x00		/* Interrupt pending 32-63 */
+#define	MCFINTC_IPRL		0x04		/* Interrupt pending 1-31 */
+#define	MCFINTC_IMRH		0x08		/* Interrupt mask 32-63 */
+#define	MCFINTC_IMRL		0x0c		/* Interrupt mask 1-31 */
+#define	MCFINTC_INTFRCH		0x10		/* Interrupt force 32-63 */
+#define	MCFINTC_INTFRCL		0x14		/* Interrupt force 1-31 */
+#define	MCFINTC_IRLR		0x18		/* */
+#define	MCFINTC_IACKL		0x19		/* */
+#define	MCFINTC_ICR0		0x40		/* Base ICR register */
+
+#define	MCFINT_VECBASE		64		/* Vector base number */
+#define	MCFINT_UART0		13		/* Interrupt number for UART0 */
+#define	MCFINT_PIT1		55		/* Interrupt number for PIT1 */
+
+/*
+ *	SDRAM configuration registers.
+ */
+#define	MCFSIM_DCR		0x44		/* SDRAM control */
+#define	MCFSIM_DACR0		0x48		/* SDRAM base address 0 */
+#define	MCFSIM_DMR0		0x4c		/* SDRAM address mask 0 */
+#define	MCFSIM_DACR1		0x50		/* SDRAM base address 1 */
+#define	MCFSIM_DMR1		0x54		/* SDRAM address mask 1 */
+
+/*
+ *	Derek Cheung - 6 Feb 2005
+ *		add I2C and QSPI register definition using Freescale's MCF5282
+ */
+/* set Port AS pin for I2C or UART */
+#define MCF5282_GPIO_PASPAR     (volatile u16 *) (MCF_IPSBAR + 0x00100056)
+
+/* Port UA Pin Assignment Register (8 Bit) */
+#define MCF5282_GPIO_PUAPAR	0x10005C
+
+/* Interrupt Mask Register Register Low */ 
+#define MCF5282_INTC0_IMRL      (volatile u32 *) (MCF_IPSBAR + 0x0C0C)
+/* Interrupt Control Register 7 */
+#define MCF5282_INTC0_ICR17     (volatile u8 *) (MCF_IPSBAR + 0x0C51)
+
+
+
+/*********************************************************************
+*
+* Inter-IC (I2C) Module
+*
+*********************************************************************/
+/* Read/Write access macros for general use */
+#define MCF5282_I2C_I2ADR       (volatile u8 *) (MCF_IPSBAR + 0x0300) // Address 
+#define MCF5282_I2C_I2FDR       (volatile u8 *) (MCF_IPSBAR + 0x0304) // Freq Divider
+#define MCF5282_I2C_I2CR        (volatile u8 *) (MCF_IPSBAR + 0x0308) // Control
+#define MCF5282_I2C_I2SR        (volatile u8 *) (MCF_IPSBAR + 0x030C) // Status
+#define MCF5282_I2C_I2DR        (volatile u8 *) (MCF_IPSBAR + 0x0310) // Data I/O
+
+/* Bit level definitions and macros */
+#define MCF5282_I2C_I2ADR_ADDR(x)                       (((x)&0x7F)<<0x01)
+
+#define MCF5282_I2C_I2FDR_IC(x)                         (((x)&0x3F))
+
+#define MCF5282_I2C_I2CR_IEN    (0x80)	// I2C enable
+#define MCF5282_I2C_I2CR_IIEN   (0x40)  // interrupt enable
+#define MCF5282_I2C_I2CR_MSTA   (0x20)  // master/slave mode
+#define MCF5282_I2C_I2CR_MTX    (0x10)  // transmit/receive mode
+#define MCF5282_I2C_I2CR_TXAK   (0x08)  // transmit acknowledge enable
+#define MCF5282_I2C_I2CR_RSTA   (0x04)  // repeat start
+
+#define MCF5282_I2C_I2SR_ICF    (0x80)  // data transfer bit
+#define MCF5282_I2C_I2SR_IAAS   (0x40)  // I2C addressed as a slave
+#define MCF5282_I2C_I2SR_IBB    (0x20)  // I2C bus busy
+#define MCF5282_I2C_I2SR_IAL    (0x10)  // aribitration lost
+#define MCF5282_I2C_I2SR_SRW    (0x04)  // slave read/write
+#define MCF5282_I2C_I2SR_IIF    (0x02)  // I2C interrupt
+#define MCF5282_I2C_I2SR_RXAK   (0x01)  // received acknowledge
+
+
+
+/*********************************************************************
+*
+* Queued Serial Peripheral Interface (QSPI) Module
+*
+*********************************************************************/
+/* Derek - 21 Feb 2005 */
+/* change to the format used in I2C */
+/* Read/Write access macros for general use */
+#define MCF5282_QSPI_QMR        MCF_IPSBAR + 0x0340
+#define MCF5282_QSPI_QDLYR      MCF_IPSBAR + 0x0344
+#define MCF5282_QSPI_QWR        MCF_IPSBAR + 0x0348
+#define MCF5282_QSPI_QIR        MCF_IPSBAR + 0x034C
+#define MCF5282_QSPI_QAR        MCF_IPSBAR + 0x0350
+#define MCF5282_QSPI_QDR        MCF_IPSBAR + 0x0354
+#define MCF5282_QSPI_QCR        MCF_IPSBAR + 0x0354
+
+/* Bit level definitions and macros */
+#define MCF5282_QSPI_QMR_MSTR                           (0x8000)
+#define MCF5282_QSPI_QMR_DOHIE                          (0x4000)
+#define MCF5282_QSPI_QMR_BITS_16                        (0x0000)
+#define MCF5282_QSPI_QMR_BITS_8                         (0x2000)
+#define MCF5282_QSPI_QMR_BITS_9                         (0x2400)
+#define MCF5282_QSPI_QMR_BITS_10                        (0x2800)
+#define MCF5282_QSPI_QMR_BITS_11                        (0x2C00)
+#define MCF5282_QSPI_QMR_BITS_12                        (0x3000)
+#define MCF5282_QSPI_QMR_BITS_13                        (0x3400)
+#define MCF5282_QSPI_QMR_BITS_14                        (0x3800)
+#define MCF5282_QSPI_QMR_BITS_15                        (0x3C00)
+#define MCF5282_QSPI_QMR_CPOL                           (0x0200)
+#define MCF5282_QSPI_QMR_CPHA                           (0x0100)
+#define MCF5282_QSPI_QMR_BAUD(x)                        (((x)&0x00FF))
+
+#define MCF5282_QSPI_QDLYR_SPE                          (0x80)
+#define MCF5282_QSPI_QDLYR_QCD(x)                       (((x)&0x007F)<<8)
+#define MCF5282_QSPI_QDLYR_DTL(x)                       (((x)&0x00FF))
+
+#define MCF5282_QSPI_QWR_HALT                           (0x8000)
+#define MCF5282_QSPI_QWR_WREN                           (0x4000)
+#define MCF5282_QSPI_QWR_WRTO                           (0x2000)
+#define MCF5282_QSPI_QWR_CSIV                           (0x1000)
+#define MCF5282_QSPI_QWR_ENDQP(x)                       (((x)&0x000F)<<8)
+#define MCF5282_QSPI_QWR_CPTQP(x)                       (((x)&0x000F)<<4)
+#define MCF5282_QSPI_QWR_NEWQP(x)                       (((x)&0x000F))
+
+#define MCF5282_QSPI_QIR_WCEFB                          (0x8000)
+#define MCF5282_QSPI_QIR_ABRTB                          (0x4000)
+#define MCF5282_QSPI_QIR_ABRTL                          (0x1000)
+#define MCF5282_QSPI_QIR_WCEFE                          (0x0800)
+#define MCF5282_QSPI_QIR_ABRTE                          (0x0400)
+#define MCF5282_QSPI_QIR_SPIFE                          (0x0100)
+#define MCF5282_QSPI_QIR_WCEF                           (0x0008)
+#define MCF5282_QSPI_QIR_ABRT                           (0x0004)
+#define MCF5282_QSPI_QIR_SPIF                           (0x0001)
+
+#define MCF5282_QSPI_QAR_ADDR(x)                        (((x)&0x003F))
+
+#define MCF5282_QSPI_QDR_COMMAND(x)                     (((x)&0xFF00))
+#define MCF5282_QSPI_QCR_DATA(x)                        (((x)&0x00FF)<<8)
+#define MCF5282_QSPI_QCR_CONT                           (0x8000)
+#define MCF5282_QSPI_QCR_BITSE                          (0x4000)
+#define MCF5282_QSPI_QCR_DT                             (0x2000)
+#define MCF5282_QSPI_QCR_DSCK                           (0x1000)
+#define MCF5282_QSPI_QCR_CS                             (((x)&0x000F)<<8)
+
+/****************************************************************************/
+#endif	/* m528xsim_h */
diff --git a/arch/m68knommu/include/asm/m5307sim.h b/arch/m68knommu/include/asm/m5307sim.h
new file mode 100644
index 00000000000..5886728409c
--- /dev/null
+++ b/arch/m68knommu/include/asm/m5307sim.h
@@ -0,0 +1,181 @@
+/****************************************************************************/
+
+/*
+ *	m5307sim.h -- ColdFire 5307 System Integration Module support.
+ *
+ *	(C) Copyright 1999,  Moreton Bay Ventures Pty Ltd.
+ *	(C) Copyright 1999,  Lineo (www.lineo.com)
+ *
+ *      Modified by David W. Miller for the MCF5307 Eval Board.
+ */
+
+/****************************************************************************/
+#ifndef	m5307sim_h
+#define	m5307sim_h
+/****************************************************************************/
+
+/*
+ *	Define the 5307 SIM register set addresses.
+ */
+#define	MCFSIM_RSR		0x00		/* Reset Status reg (r/w) */
+#define	MCFSIM_SYPCR		0x01		/* System Protection reg (r/w)*/
+#define	MCFSIM_SWIVR		0x02		/* SW Watchdog intr reg (r/w) */
+#define	MCFSIM_SWSR		0x03		/* SW Watchdog service (r/w) */
+#define	MCFSIM_PAR		0x04		/* Pin Assignment reg (r/w) */
+#define	MCFSIM_IRQPAR		0x06		/* Interrupt Assignment reg (r/w) */
+#define	MCFSIM_PLLCR		0x08		/* PLL Controll Reg*/
+#define	MCFSIM_MPARK		0x0C		/* BUS Master Control Reg*/
+#define	MCFSIM_IPR		0x40		/* Interrupt Pend reg (r/w) */
+#define	MCFSIM_IMR		0x44		/* Interrupt Mask reg (r/w) */
+#define	MCFSIM_AVR		0x4b		/* Autovector Ctrl reg (r/w) */
+#define	MCFSIM_ICR0		0x4c		/* Intr Ctrl reg 0 (r/w) */
+#define	MCFSIM_ICR1		0x4d		/* Intr Ctrl reg 1 (r/w) */
+#define	MCFSIM_ICR2		0x4e		/* Intr Ctrl reg 2 (r/w) */
+#define	MCFSIM_ICR3		0x4f		/* Intr Ctrl reg 3 (r/w) */
+#define	MCFSIM_ICR4		0x50		/* Intr Ctrl reg 4 (r/w) */
+#define	MCFSIM_ICR5		0x51		/* Intr Ctrl reg 5 (r/w) */
+#define	MCFSIM_ICR6		0x52		/* Intr Ctrl reg 6 (r/w) */
+#define	MCFSIM_ICR7		0x53		/* Intr Ctrl reg 7 (r/w) */
+#define	MCFSIM_ICR8		0x54		/* Intr Ctrl reg 8 (r/w) */
+#define	MCFSIM_ICR9		0x55		/* Intr Ctrl reg 9 (r/w) */
+#define	MCFSIM_ICR10		0x56		/* Intr Ctrl reg 10 (r/w) */
+#define	MCFSIM_ICR11		0x57		/* Intr Ctrl reg 11 (r/w) */
+
+#define MCFSIM_CSAR0		0x80		/* CS 0 Address 0 reg (r/w) */
+#define MCFSIM_CSMR0		0x84		/* CS 0 Mask 0 reg (r/w) */
+#define MCFSIM_CSCR0		0x8a		/* CS 0 Control reg (r/w) */
+#define MCFSIM_CSAR1		0x8c		/* CS 1 Address reg (r/w) */
+#define MCFSIM_CSMR1		0x90		/* CS 1 Mask reg (r/w) */
+#define MCFSIM_CSCR1		0x96		/* CS 1 Control reg (r/w) */
+
+#ifdef CONFIG_OLDMASK
+#define MCFSIM_CSBAR		0x98		/* CS Base Address reg (r/w) */
+#define MCFSIM_CSBAMR		0x9c		/* CS Base Mask reg (r/w) */
+#define MCFSIM_CSMR2		0x9e		/* CS 2 Mask reg (r/w) */
+#define MCFSIM_CSCR2		0xa2		/* CS 2 Control reg (r/w) */
+#define MCFSIM_CSMR3		0xaa		/* CS 3 Mask reg (r/w) */
+#define MCFSIM_CSCR3		0xae		/* CS 3 Control reg (r/w) */
+#define MCFSIM_CSMR4		0xb6		/* CS 4 Mask reg (r/w) */
+#define MCFSIM_CSCR4		0xba		/* CS 4 Control reg (r/w) */
+#define MCFSIM_CSMR5		0xc2		/* CS 5 Mask reg (r/w) */
+#define MCFSIM_CSCR5		0xc6		/* CS 5 Control reg (r/w) */
+#define MCFSIM_CSMR6		0xce		/* CS 6 Mask reg (r/w) */
+#define MCFSIM_CSCR6		0xd2		/* CS 6 Control reg (r/w) */
+#define MCFSIM_CSMR7		0xda		/* CS 7 Mask reg (r/w) */
+#define MCFSIM_CSCR7		0xde		/* CS 7 Control reg (r/w) */
+#else
+#define MCFSIM_CSAR2		0x98		/* CS 2 Address reg (r/w) */
+#define MCFSIM_CSMR2		0x9c		/* CS 2 Mask reg (r/w) */
+#define MCFSIM_CSCR2		0xa2		/* CS 2 Control reg (r/w) */
+#define MCFSIM_CSAR3		0xa4		/* CS 3 Address reg (r/w) */
+#define MCFSIM_CSMR3		0xa8		/* CS 3 Mask reg (r/w) */
+#define MCFSIM_CSCR3		0xae		/* CS 3 Control reg (r/w) */
+#define MCFSIM_CSAR4		0xb0		/* CS 4 Address reg (r/w) */
+#define MCFSIM_CSMR4		0xb4		/* CS 4 Mask reg (r/w) */
+#define MCFSIM_CSCR4		0xba		/* CS 4 Control reg (r/w) */
+#define MCFSIM_CSAR5		0xbc		/* CS 5 Address reg (r/w) */
+#define MCFSIM_CSMR5		0xc0		/* CS 5 Mask reg (r/w) */
+#define MCFSIM_CSCR5		0xc6		/* CS 5 Control reg (r/w) */
+#define MCFSIM_CSAR6		0xc8		/* CS 6 Address reg (r/w) */
+#define MCFSIM_CSMR6		0xcc		/* CS 6 Mask reg (r/w) */
+#define MCFSIM_CSCR6		0xd2		/* CS 6 Control reg (r/w) */
+#define MCFSIM_CSAR7		0xd4		/* CS 7 Address reg (r/w) */
+#define MCFSIM_CSMR7		0xd8		/* CS 7 Mask reg (r/w) */
+#define MCFSIM_CSCR7		0xde		/* CS 7 Control reg (r/w) */
+#endif /* CONFIG_OLDMASK */
+
+#define MCFSIM_DCR		0x100		/* DRAM Control reg (r/w) */
+#define MCFSIM_DACR0		0x108		/* DRAM 0 Addr and Ctrl (r/w) */
+#define MCFSIM_DMR0		0x10c		/* DRAM 0 Mask reg (r/w) */
+#define MCFSIM_DACR1		0x110		/* DRAM 1 Addr and Ctrl (r/w) */
+#define MCFSIM_DMR1		0x114		/* DRAM 1 Mask reg (r/w) */
+
+#define	MCFSIM_PADDR		0x244		/* Parallel Direction (r/w) */
+#define	MCFSIM_PADAT		0x248		/* Parallel Data (r/w) */
+
+
+/* Definition offset address for CS2-7  -- old mask 5307 */
+
+#define	MCF5307_CS2		(0x400000)
+#define	MCF5307_CS3		(0x600000)
+#define	MCF5307_CS4		(0x800000)
+#define	MCF5307_CS5		(0xA00000)
+#define	MCF5307_CS6		(0xC00000)
+#define	MCF5307_CS7		(0xE00000)
+
+
+/*
+ *	Some symbol defines for the above...
+ */
+#define	MCFSIM_SWDICR		MCFSIM_ICR0	/* Watchdog timer ICR */
+#define	MCFSIM_TIMER1ICR	MCFSIM_ICR1	/* Timer 1 ICR */
+#define	MCFSIM_TIMER2ICR	MCFSIM_ICR2	/* Timer 2 ICR */
+#define	MCFSIM_UART1ICR		MCFSIM_ICR4	/* UART 1 ICR */
+#define	MCFSIM_UART2ICR		MCFSIM_ICR5	/* UART 2 ICR */
+#define	MCFSIM_DMA0ICR		MCFSIM_ICR6	/* DMA 0 ICR */
+#define	MCFSIM_DMA1ICR		MCFSIM_ICR7	/* DMA 1 ICR */
+#define	MCFSIM_DMA2ICR		MCFSIM_ICR8	/* DMA 2 ICR */
+#define	MCFSIM_DMA3ICR		MCFSIM_ICR9	/* DMA 3 ICR */
+
+#if defined(CONFIG_M5307)
+#define	MCFSIM_IMR_MASKALL	0x3fffe		/* All SIM intr sources */
+#endif
+
+/*
+ *	Macro to set IMR register. It is 32 bits on the 5307.
+ */
+#define	mcf_getimr()		\
+	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR))
+
+#define	mcf_setimr(imr)		\
+	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr);
+
+#define	mcf_getipr()		\
+	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR))
+
+
+/*
+ *	Some symbol defines for the Parallel Port Pin Assignment Register
+ */
+#define MCFSIM_PAR_DREQ0        0x40            /* Set to select DREQ0 input */
+                                                /* Clear to select par I/O */
+#define MCFSIM_PAR_DREQ1        0x20            /* Select DREQ1 input */
+                                                /* Clear to select par I/O */
+
+/*
+ *       Defines for the IRQPAR Register
+ */
+#define IRQ5_LEVEL4	0x80
+#define IRQ3_LEVEL6	0x40
+#define IRQ1_LEVEL2	0x20
+
+
+/*
+ *	Define the Cache register flags.
+ */
+#define	CACR_EC			(1<<31)
+#define	CACR_ESB		(1<<29)
+#define	CACR_DPI		(1<<28)
+#define	CACR_HLCK		(1<<27)
+#define	CACR_CINVA		(1<<24)
+#define	CACR_DNFB		(1<<10)
+#define	CACR_DCM_WTHRU		(0<<8)
+#define	CACR_DCM_WBACK		(1<<8)
+#define	CACR_DCM_OFF_PRE	(2<<8)
+#define	CACR_DCM_OFF_IMP	(3<<8)
+#define	CACR_DW			(1<<5)
+
+#define	ACR_BASE_POS		24
+#define	ACR_MASK_POS		16
+#define	ACR_ENABLE		(1<<15)
+#define	ACR_USER		(0<<13)
+#define	ACR_SUPER		(1<<13)
+#define	ACR_ANY			(2<<13)
+#define	ACR_CM_WTHRU		(0<<5)
+#define	ACR_CM_WBACK		(1<<5)
+#define	ACR_CM_OFF_PRE		(2<<5)
+#define	ACR_CM_OFF_IMP		(3<<5)
+#define	ACR_WPROTECT		(1<<2)
+
+/****************************************************************************/
+#endif	/* m5307sim_h */
diff --git a/arch/m68knommu/include/asm/m532xsim.h b/arch/m68knommu/include/asm/m532xsim.h
new file mode 100644
index 00000000000..1835fd20a82
--- /dev/null
+++ b/arch/m68knommu/include/asm/m532xsim.h
@@ -0,0 +1,2238 @@
+/****************************************************************************/
+
+/*
+ *	m532xsim.h -- ColdFire 5329 registers
+ */
+
+/****************************************************************************/
+#ifndef	m532xsim_h
+#define	m532xsim_h
+/****************************************************************************/
+
+#define MCF_REG32(x) (*(volatile unsigned long  *)(x))
+#define MCF_REG16(x) (*(volatile unsigned short *)(x))
+#define MCF_REG08(x) (*(volatile unsigned char  *)(x))
+
+#define MCFINT_VECBASE      64
+#define MCFINT_UART0        26          /* Interrupt number for UART0 */
+#define MCFINT_UART1        27          /* Interrupt number for UART1 */
+
+#define MCF_WTM_WCR	MCF_REG16(0xFC098000)
+
+/*
+ *	Define the 532x SIM register set addresses.
+ */
+#define	MCFSIM_IPRL		0xFC048004
+#define	MCFSIM_IPRH		0xFC048000
+#define	MCFSIM_IPR		MCFSIM_IPRL
+#define	MCFSIM_IMRL		0xFC04800C
+#define	MCFSIM_IMRH		0xFC048008
+#define	MCFSIM_IMR		MCFSIM_IMRL
+#define	MCFSIM_ICR0		0xFC048040	
+#define	MCFSIM_ICR1		0xFC048041	
+#define	MCFSIM_ICR2		0xFC048042	
+#define	MCFSIM_ICR3		0xFC048043	
+#define	MCFSIM_ICR4		0xFC048044	
+#define	MCFSIM_ICR5		0xFC048045	
+#define	MCFSIM_ICR6		0xFC048046	
+#define	MCFSIM_ICR7		0xFC048047	
+#define	MCFSIM_ICR8		0xFC048048	
+#define	MCFSIM_ICR9		0xFC048049	
+#define	MCFSIM_ICR10		0xFC04804A
+#define	MCFSIM_ICR11		0xFC04804B
+
+/*
+ *	Some symbol defines for the above...
+ */
+#define	MCFSIM_SWDICR		MCFSIM_ICR0	/* Watchdog timer ICR */
+#define	MCFSIM_TIMER1ICR	MCFSIM_ICR1	/* Timer 1 ICR */
+#define	MCFSIM_TIMER2ICR	MCFSIM_ICR2	/* Timer 2 ICR */
+#define	MCFSIM_UART1ICR		MCFSIM_ICR4	/* UART 1 ICR */
+#define	MCFSIM_UART2ICR		MCFSIM_ICR5	/* UART 2 ICR */
+#define	MCFSIM_DMA0ICR		MCFSIM_ICR6	/* DMA 0 ICR */
+#define	MCFSIM_DMA1ICR		MCFSIM_ICR7	/* DMA 1 ICR */
+#define	MCFSIM_DMA2ICR		MCFSIM_ICR8	/* DMA 2 ICR */
+#define	MCFSIM_DMA3ICR		MCFSIM_ICR9	/* DMA 3 ICR */
+
+
+#define	MCFSIM_IMR_MASKALL	0xFFFFFFFF	/* All SIM intr sources */
+
+#define MCFSIM_IMR_SIMR0	0xFC04801C
+#define MCFSIM_IMR_SIMR1	0xFC04C01C
+#define MCFSIM_IMR_CIMR0	0xFC04801D
+#define MCFSIM_IMR_CIMR1	0xFC04C01D
+
+#define MCFSIM_ICR_TIMER1	(0xFC048040+32)
+#define MCFSIM_ICR_TIMER2	(0xFC048040+33)
+
+
+/*
+ *	Macro to set IMR register. It is 32 bits on the 5307.
+ */
+#define	mcf_getimr()		\
+	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR))
+
+#define	mcf_setimr(imr)		\
+	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr);
+
+#define	mcf_getipr()		\
+	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR))
+
+#define	mcf_getiprl()		\
+	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPRL))
+
+#define	mcf_getiprh()		\
+	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPRH))
+
+
+#define mcf_enable_irq0(irq)		\
+	*((volatile unsigned char*) (MCFSIM_IMR_CIMR0)) = (irq);
+
+#define mcf_enable_irq1(irq)		\
+	*((volatile unsigned char*) (MCFSIM_IMR_CIMR1)) = (irq);
+
+#define mcf_disable_irq0(irq)		\
+	*((volatile unsigned char*) (MCFSIM_IMR_SIMR0)) = (irq);
+
+#define mcf_disable_irq1(irq)		\
+	*((volatile unsigned char*) (MCFSIM_IMR_SIMR1)) = (irq);
+
+/*
+ *	Define the Cache register flags.
+ */
+#define	CACR_EC			(1<<31)
+#define	CACR_ESB		(1<<29)
+#define	CACR_DPI		(1<<28)
+#define	CACR_HLCK		(1<<27)
+#define	CACR_CINVA		(1<<24)
+#define	CACR_DNFB		(1<<10)
+#define	CACR_DCM_WTHRU		(0<<8)
+#define	CACR_DCM_WBACK		(1<<8)
+#define	CACR_DCM_OFF_PRE	(2<<8)
+#define	CACR_DCM_OFF_IMP	(3<<8)
+#define	CACR_DW			(1<<5)
+
+#define	ACR_BASE_POS		24
+#define	ACR_MASK_POS		16
+#define	ACR_ENABLE		(1<<15)
+#define	ACR_USER		(0<<13)
+#define	ACR_SUPER		(1<<13)
+#define	ACR_ANY			(2<<13)
+#define	ACR_CM_WTHRU		(0<<5)
+#define	ACR_CM_WBACK		(1<<5)
+#define	ACR_CM_OFF_PRE		(2<<5)
+#define	ACR_CM_OFF_IMP		(3<<5)
+#define	ACR_WPROTECT		(1<<2)
+
+/*********************************************************************
+ *
+ * Inter-IC (I2C) Module
+ *
+ *********************************************************************/
+
+/* Read/Write access macros for general use */
+#define MCF532x_I2C_I2ADR       (volatile u8 *) (0xFC058000) // Address 
+#define MCF532x_I2C_I2FDR       (volatile u8 *) (0xFC058004) // Freq Divider
+#define MCF532x_I2C_I2CR        (volatile u8 *) (0xFC058008) // Control
+#define MCF532x_I2C_I2SR        (volatile u8 *) (0xFC05800C) // Status
+#define MCF532x_I2C_I2DR        (volatile u8 *) (0xFC058010) // Data I/O
+
+/* Bit level definitions and macros */
+#define MCF532x_I2C_I2ADR_ADDR(x)                       (((x)&0x7F)<<0x01)
+
+#define MCF532x_I2C_I2FDR_IC(x)                         (((x)&0x3F))
+
+#define MCF532x_I2C_I2CR_IEN    (0x80)	// I2C enable
+#define MCF532x_I2C_I2CR_IIEN   (0x40)  // interrupt enable
+#define MCF532x_I2C_I2CR_MSTA   (0x20)  // master/slave mode
+#define MCF532x_I2C_I2CR_MTX    (0x10)  // transmit/receive mode
+#define MCF532x_I2C_I2CR_TXAK   (0x08)  // transmit acknowledge enable
+#define MCF532x_I2C_I2CR_RSTA   (0x04)  // repeat start
+
+#define MCF532x_I2C_I2SR_ICF    (0x80)  // data transfer bit
+#define MCF532x_I2C_I2SR_IAAS   (0x40)  // I2C addressed as a slave
+#define MCF532x_I2C_I2SR_IBB    (0x20)  // I2C bus busy
+#define MCF532x_I2C_I2SR_IAL    (0x10)  // aribitration lost
+#define MCF532x_I2C_I2SR_SRW    (0x04)  // slave read/write
+#define MCF532x_I2C_I2SR_IIF    (0x02)  // I2C interrupt
+#define MCF532x_I2C_I2SR_RXAK   (0x01)  // received acknowledge
+
+#define MCF532x_PAR_FECI2C	(volatile u8 *) (0xFC0A4053)
+
+
+/*
+ *	The M5329EVB board needs a help getting its devices initialized 
+ *	at kernel start time if dBUG doesn't set it up (for example 
+ *	it is not used), so we need to do it manually.
+ */
+#ifdef __ASSEMBLER__
+.macro m5329EVB_setup
+	movel	#0xFC098000, %a7
+	movel	#0x0, (%a7)
+#define CORE_SRAM	0x80000000	
+#define CORE_SRAM_SIZE	0x8000
+	movel	#CORE_SRAM, %d0
+	addl	#0x221, %d0
+	movec	%d0,%RAMBAR1
+	movel	#CORE_SRAM, %sp
+	addl	#CORE_SRAM_SIZE, %sp
+	jsr	sysinit
+.endm
+#define	PLATFORM_SETUP	m5329EVB_setup
+
+#endif /* __ASSEMBLER__ */
+
+/*********************************************************************
+ *
+ * Chip Configuration Module (CCM)
+ *
+ *********************************************************************/
+
+/* Register read/write macros */
+#define MCF_CCM_CCR               MCF_REG16(0xFC0A0004)
+#define MCF_CCM_RCON              MCF_REG16(0xFC0A0008)
+#define MCF_CCM_CIR               MCF_REG16(0xFC0A000A)
+#define MCF_CCM_MISCCR            MCF_REG16(0xFC0A0010)
+#define MCF_CCM_CDR               MCF_REG16(0xFC0A0012)
+#define MCF_CCM_UHCSR             MCF_REG16(0xFC0A0014)
+#define MCF_CCM_UOCSR             MCF_REG16(0xFC0A0016)
+
+/* Bit definitions and macros for MCF_CCM_CCR */
+#define MCF_CCM_CCR_RESERVED      (0x0001)
+#define MCF_CCM_CCR_PLL_MODE      (0x0003)
+#define MCF_CCM_CCR_OSC_MODE      (0x0005)
+#define MCF_CCM_CCR_BOOTPS(x)     (((x)&0x0003)<<3|0x0001)
+#define MCF_CCM_CCR_LOAD          (0x0021)
+#define MCF_CCM_CCR_LIMP          (0x0041)
+#define MCF_CCM_CCR_CSC(x)        (((x)&0x0003)<<8|0x0001)
+
+/* Bit definitions and macros for MCF_CCM_RCON */
+#define MCF_CCM_RCON_RESERVED     (0x0001)
+#define MCF_CCM_RCON_PLL_MODE     (0x0003)
+#define MCF_CCM_RCON_OSC_MODE     (0x0005)
+#define MCF_CCM_RCON_BOOTPS(x)    (((x)&0x0003)<<3|0x0001)
+#define MCF_CCM_RCON_LOAD         (0x0021)
+#define MCF_CCM_RCON_LIMP         (0x0041)
+#define MCF_CCM_RCON_CSC(x)       (((x)&0x0003)<<8|0x0001)
+
+/* Bit definitions and macros for MCF_CCM_CIR */
+#define MCF_CCM_CIR_PRN(x)        (((x)&0x003F)<<0)
+#define MCF_CCM_CIR_PIN(x)        (((x)&0x03FF)<<6)
+
+/* Bit definitions and macros for MCF_CCM_MISCCR */
+#define MCF_CCM_MISCCR_USBSRC     (0x0001)
+#define MCF_CCM_MISCCR_USBDIV     (0x0002)
+#define MCF_CCM_MISCCR_SSI_SRC    (0x0010)
+#define MCF_CCM_MISCCR_TIM_DMA   (0x0020)
+#define MCF_CCM_MISCCR_SSI_PUS    (0x0040)
+#define MCF_CCM_MISCCR_SSI_PUE    (0x0080)
+#define MCF_CCM_MISCCR_LCD_CHEN   (0x0100)
+#define MCF_CCM_MISCCR_LIMP       (0x1000)
+#define MCF_CCM_MISCCR_PLL_LOCK   (0x2000)
+
+/* Bit definitions and macros for MCF_CCM_CDR */
+#define MCF_CCM_CDR_SSIDIV(x)     (((x)&0x000F)<<0)
+#define MCF_CCM_CDR_LPDIV(x)      (((x)&0x000F)<<8)
+
+/* Bit definitions and macros for MCF_CCM_UHCSR */
+#define MCF_CCM_UHCSR_XPDE        (0x0001)
+#define MCF_CCM_UHCSR_UHMIE       (0x0002)
+#define MCF_CCM_UHCSR_WKUP        (0x0004)
+#define MCF_CCM_UHCSR_PORTIND(x)  (((x)&0x0003)<<14)
+
+/* Bit definitions and macros for MCF_CCM_UOCSR */
+#define MCF_CCM_UOCSR_XPDE        (0x0001)
+#define MCF_CCM_UOCSR_UOMIE       (0x0002)
+#define MCF_CCM_UOCSR_WKUP        (0x0004)
+#define MCF_CCM_UOCSR_PWRFLT      (0x0008)
+#define MCF_CCM_UOCSR_SEND        (0x0010)
+#define MCF_CCM_UOCSR_VVLD        (0x0020)
+#define MCF_CCM_UOCSR_BVLD        (0x0040)
+#define MCF_CCM_UOCSR_AVLD        (0x0080)
+#define MCF_CCM_UOCSR_DPPU        (0x0100)
+#define MCF_CCM_UOCSR_DCR_VBUS    (0x0200)
+#define MCF_CCM_UOCSR_CRG_VBUS    (0x0400)
+#define MCF_CCM_UOCSR_DRV_VBUS    (0x0800)
+#define MCF_CCM_UOCSR_DMPD        (0x1000)
+#define MCF_CCM_UOCSR_DPPD        (0x2000)
+#define MCF_CCM_UOCSR_PORTIND(x)  (((x)&0x0003)<<14)
+
+/*********************************************************************
+ *
+ * DMA Timers (DTIM)
+ *
+ *********************************************************************/
+
+/* Register read/write macros */
+#define MCF_DTIM0_DTMR           MCF_REG16(0xFC070000)
+#define MCF_DTIM0_DTXMR          MCF_REG08(0xFC070002)
+#define MCF_DTIM0_DTER           MCF_REG08(0xFC070003)
+#define MCF_DTIM0_DTRR           MCF_REG32(0xFC070004)
+#define MCF_DTIM0_DTCR           MCF_REG32(0xFC070008)
+#define MCF_DTIM0_DTCN           MCF_REG32(0xFC07000C)
+#define MCF_DTIM1_DTMR           MCF_REG16(0xFC074000)
+#define MCF_DTIM1_DTXMR          MCF_REG08(0xFC074002)
+#define MCF_DTIM1_DTER           MCF_REG08(0xFC074003)
+#define MCF_DTIM1_DTRR           MCF_REG32(0xFC074004)
+#define MCF_DTIM1_DTCR           MCF_REG32(0xFC074008)
+#define MCF_DTIM1_DTCN           MCF_REG32(0xFC07400C)
+#define MCF_DTIM2_DTMR           MCF_REG16(0xFC078000)
+#define MCF_DTIM2_DTXMR          MCF_REG08(0xFC078002)
+#define MCF_DTIM2_DTER           MCF_REG08(0xFC078003)
+#define MCF_DTIM2_DTRR           MCF_REG32(0xFC078004)
+#define MCF_DTIM2_DTCR           MCF_REG32(0xFC078008)
+#define MCF_DTIM2_DTCN           MCF_REG32(0xFC07800C)
+#define MCF_DTIM3_DTMR           MCF_REG16(0xFC07C000)
+#define MCF_DTIM3_DTXMR          MCF_REG08(0xFC07C002)
+#define MCF_DTIM3_DTER           MCF_REG08(0xFC07C003)
+#define MCF_DTIM3_DTRR           MCF_REG32(0xFC07C004)
+#define MCF_DTIM3_DTCR           MCF_REG32(0xFC07C008)
+#define MCF_DTIM3_DTCN           MCF_REG32(0xFC07C00C)
+#define MCF_DTIM_DTMR(x)         MCF_REG16(0xFC070000+((x)*0x4000))
+#define MCF_DTIM_DTXMR(x)        MCF_REG08(0xFC070002+((x)*0x4000))
+#define MCF_DTIM_DTER(x)         MCF_REG08(0xFC070003+((x)*0x4000))
+#define MCF_DTIM_DTRR(x)         MCF_REG32(0xFC070004+((x)*0x4000))
+#define MCF_DTIM_DTCR(x)         MCF_REG32(0xFC070008+((x)*0x4000))
+#define MCF_DTIM_DTCN(x)         MCF_REG32(0xFC07000C+((x)*0x4000))
+
+/* Bit definitions and macros for MCF_DTIM_DTMR */
+#define MCF_DTIM_DTMR_RST        (0x0001)
+#define MCF_DTIM_DTMR_CLK(x)     (((x)&0x0003)<<1)
+#define MCF_DTIM_DTMR_FRR        (0x0008)
+#define MCF_DTIM_DTMR_ORRI       (0x0010)
+#define MCF_DTIM_DTMR_OM         (0x0020)
+#define MCF_DTIM_DTMR_CE(x)      (((x)&0x0003)<<6)
+#define MCF_DTIM_DTMR_PS(x)      (((x)&0x00FF)<<8)
+#define MCF_DTIM_DTMR_CE_ANY     (0x00C0)
+#define MCF_DTIM_DTMR_CE_FALL    (0x0080)
+#define MCF_DTIM_DTMR_CE_RISE    (0x0040)
+#define MCF_DTIM_DTMR_CE_NONE    (0x0000)
+#define MCF_DTIM_DTMR_CLK_DTIN   (0x0006)
+#define MCF_DTIM_DTMR_CLK_DIV16  (0x0004)
+#define MCF_DTIM_DTMR_CLK_DIV1   (0x0002)
+#define MCF_DTIM_DTMR_CLK_STOP   (0x0000)
+
+/* Bit definitions and macros for MCF_DTIM_DTXMR */
+#define MCF_DTIM_DTXMR_MODE16    (0x01)
+#define MCF_DTIM_DTXMR_DMAEN     (0x80)
+
+/* Bit definitions and macros for MCF_DTIM_DTER */
+#define MCF_DTIM_DTER_CAP        (0x01)
+#define MCF_DTIM_DTER_REF        (0x02)
+
+/* Bit definitions and macros for MCF_DTIM_DTRR */
+#define MCF_DTIM_DTRR_REF(x)     (((x)&0xFFFFFFFF)<<0)
+
+/* Bit definitions and macros for MCF_DTIM_DTCR */
+#define MCF_DTIM_DTCR_CAP(x)     (((x)&0xFFFFFFFF)<<0)
+
+/* Bit definitions and macros for MCF_DTIM_DTCN */
+#define MCF_DTIM_DTCN_CNT(x)     (((x)&0xFFFFFFFF)<<0)
+
+/*********************************************************************
+ *
+ * FlexBus Chip Selects (FBCS)
+ *
+ *********************************************************************/
+
+/* Register read/write macros */
+#define MCF_FBCS0_CSAR		MCF_REG32(0xFC008000)
+#define MCF_FBCS0_CSMR		MCF_REG32(0xFC008004)
+#define MCF_FBCS0_CSCR		MCF_REG32(0xFC008008)
+#define MCF_FBCS1_CSAR		MCF_REG32(0xFC00800C)
+#define MCF_FBCS1_CSMR		MCF_REG32(0xFC008010)
+#define MCF_FBCS1_CSCR		MCF_REG32(0xFC008014)
+#define MCF_FBCS2_CSAR		MCF_REG32(0xFC008018)
+#define MCF_FBCS2_CSMR		MCF_REG32(0xFC00801C)
+#define MCF_FBCS2_CSCR		MCF_REG32(0xFC008020)
+#define MCF_FBCS3_CSAR		MCF_REG32(0xFC008024)
+#define MCF_FBCS3_CSMR		MCF_REG32(0xFC008028)
+#define MCF_FBCS3_CSCR		MCF_REG32(0xFC00802C)
+#define MCF_FBCS4_CSAR		MCF_REG32(0xFC008030)
+#define MCF_FBCS4_CSMR		MCF_REG32(0xFC008034)
+#define MCF_FBCS4_CSCR		MCF_REG32(0xFC008038)
+#define MCF_FBCS5_CSAR		MCF_REG32(0xFC00803C)
+#define MCF_FBCS5_CSMR		MCF_REG32(0xFC008040)
+#define MCF_FBCS5_CSCR		MCF_REG32(0xFC008044)
+#define MCF_FBCS_CSAR(x)	MCF_REG32(0xFC008000+((x)*0x00C))
+#define MCF_FBCS_CSMR(x)	MCF_REG32(0xFC008004+((x)*0x00C))
+#define MCF_FBCS_CSCR(x)	MCF_REG32(0xFC008008+((x)*0x00C))
+
+/* Bit definitions and macros for MCF_FBCS_CSAR */
+#define MCF_FBCS_CSAR_BA(x)	((x)&0xFFFF0000)
+
+/* Bit definitions and macros for MCF_FBCS_CSMR */
+#define MCF_FBCS_CSMR_V		(0x00000001)
+#define MCF_FBCS_CSMR_WP	(0x00000100)
+#define MCF_FBCS_CSMR_BAM(x)	(((x)&0x0000FFFF)<<16)
+#define MCF_FBCS_CSMR_BAM_4G	(0xFFFF0000)
+#define MCF_FBCS_CSMR_BAM_2G	(0x7FFF0000)
+#define MCF_FBCS_CSMR_BAM_1G	(0x3FFF0000)
+#define MCF_FBCS_CSMR_BAM_1024M	(0x3FFF0000)
+#define MCF_FBCS_CSMR_BAM_512M	(0x1FFF0000)
+#define MCF_FBCS_CSMR_BAM_256M	(0x0FFF0000)
+#define MCF_FBCS_CSMR_BAM_128M	(0x07FF0000)
+#define MCF_FBCS_CSMR_BAM_64M	(0x03FF0000)
+#define MCF_FBCS_CSMR_BAM_32M	(0x01FF0000)
+#define MCF_FBCS_CSMR_BAM_16M	(0x00FF0000)
+#define MCF_FBCS_CSMR_BAM_8M	(0x007F0000)
+#define MCF_FBCS_CSMR_BAM_4M	(0x003F0000)
+#define MCF_FBCS_CSMR_BAM_2M	(0x001F0000)
+#define MCF_FBCS_CSMR_BAM_1M	(0x000F0000)
+#define MCF_FBCS_CSMR_BAM_1024K	(0x000F0000)
+#define MCF_FBCS_CSMR_BAM_512K	(0x00070000)
+#define MCF_FBCS_CSMR_BAM_256K	(0x00030000)
+#define MCF_FBCS_CSMR_BAM_128K	(0x00010000)
+#define MCF_FBCS_CSMR_BAM_64K	(0x00000000)
+
+/* Bit definitions and macros for MCF_FBCS_CSCR */
+#define MCF_FBCS_CSCR_BSTW	(0x00000008)
+#define MCF_FBCS_CSCR_BSTR	(0x00000010)
+#define MCF_FBCS_CSCR_BEM	(0x00000020)
+#define MCF_FBCS_CSCR_PS(x)	(((x)&0x00000003)<<6)
+#define MCF_FBCS_CSCR_AA	(0x00000100)
+#define MCF_FBCS_CSCR_SBM	(0x00000200)
+#define MCF_FBCS_CSCR_WS(x)	(((x)&0x0000003F)<<10)
+#define MCF_FBCS_CSCR_WRAH(x)	(((x)&0x00000003)<<16)
+#define MCF_FBCS_CSCR_RDAH(x)	(((x)&0x00000003)<<18)
+#define MCF_FBCS_CSCR_ASET(x)	(((x)&0x00000003)<<20)
+#define MCF_FBCS_CSCR_SWSEN	(0x00800000)
+#define MCF_FBCS_CSCR_SWS(x)	(((x)&0x0000003F)<<26)
+#define MCF_FBCS_CSCR_PS_8	(0x0040)
+#define MCF_FBCS_CSCR_PS_16	(0x0080)
+#define MCF_FBCS_CSCR_PS_32	(0x0000)
+
+/*********************************************************************
+ *
+ * General Purpose I/O (GPIO)
+ *
+ *********************************************************************/
+
+/* Register read/write macros */
+#define MCF_GPIO_PODR_FECH		MCF_REG08(0xFC0A4000)
+#define MCF_GPIO_PODR_FECL		MCF_REG08(0xFC0A4001)
+#define MCF_GPIO_PODR_SSI		MCF_REG08(0xFC0A4002)
+#define MCF_GPIO_PODR_BUSCTL		MCF_REG08(0xFC0A4003)
+#define MCF_GPIO_PODR_BE		MCF_REG08(0xFC0A4004)
+#define MCF_GPIO_PODR_CS		MCF_REG08(0xFC0A4005)
+#define MCF_GPIO_PODR_PWM		MCF_REG08(0xFC0A4006)
+#define MCF_GPIO_PODR_FECI2C		MCF_REG08(0xFC0A4007)
+#define MCF_GPIO_PODR_UART		MCF_REG08(0xFC0A4009)
+#define MCF_GPIO_PODR_QSPI		MCF_REG08(0xFC0A400A)
+#define MCF_GPIO_PODR_TIMER		MCF_REG08(0xFC0A400B)
+#define MCF_GPIO_PODR_LCDDATAH		MCF_REG08(0xFC0A400D)
+#define MCF_GPIO_PODR_LCDDATAM		MCF_REG08(0xFC0A400E)
+#define MCF_GPIO_PODR_LCDDATAL		MCF_REG08(0xFC0A400F)
+#define MCF_GPIO_PODR_LCDCTLH		MCF_REG08(0xFC0A4010)
+#define MCF_GPIO_PODR_LCDCTLL		MCF_REG08(0xFC0A4011)
+#define MCF_GPIO_PDDR_FECH		MCF_REG08(0xFC0A4014)
+#define MCF_GPIO_PDDR_FECL		MCF_REG08(0xFC0A4015)
+#define MCF_GPIO_PDDR_SSI		MCF_REG08(0xFC0A4016)
+#define MCF_GPIO_PDDR_BUSCTL		MCF_REG08(0xFC0A4017)
+#define MCF_GPIO_PDDR_BE		MCF_REG08(0xFC0A4018)
+#define MCF_GPIO_PDDR_CS		MCF_REG08(0xFC0A4019)
+#define MCF_GPIO_PDDR_PWM		MCF_REG08(0xFC0A401A)
+#define MCF_GPIO_PDDR_FECI2C		MCF_REG08(0xFC0A401B)
+#define MCF_GPIO_PDDR_UART		MCF_REG08(0xFC0A401C)
+#define MCF_GPIO_PDDR_QSPI		MCF_REG08(0xFC0A401E)
+#define MCF_GPIO_PDDR_TIMER		MCF_REG08(0xFC0A401F)
+#define MCF_GPIO_PDDR_LCDDATAH		MCF_REG08(0xFC0A4021)
+#define MCF_GPIO_PDDR_LCDDATAM		MCF_REG08(0xFC0A4022)
+#define MCF_GPIO_PDDR_LCDDATAL		MCF_REG08(0xFC0A4023)
+#define MCF_GPIO_PDDR_LCDCTLH		MCF_REG08(0xFC0A4024)
+#define MCF_GPIO_PDDR_LCDCTLL		MCF_REG08(0xFC0A4025)
+#define MCF_GPIO_PPDSDR_FECH		MCF_REG08(0xFC0A4028)
+#define MCF_GPIO_PPDSDR_FECL		MCF_REG08(0xFC0A4029)
+#define MCF_GPIO_PPDSDR_SSI		MCF_REG08(0xFC0A402A)
+#define MCF_GPIO_PPDSDR_BUSCTL		MCF_REG08(0xFC0A402B)
+#define MCF_GPIO_PPDSDR_BE		MCF_REG08(0xFC0A402C)
+#define MCF_GPIO_PPDSDR_CS		MCF_REG08(0xFC0A402D)
+#define MCF_GPIO_PPDSDR_PWM		MCF_REG08(0xFC0A402E)
+#define MCF_GPIO_PPDSDR_FECI2C		MCF_REG08(0xFC0A402F)
+#define MCF_GPIO_PPDSDR_UART		MCF_REG08(0xFC0A4031)
+#define MCF_GPIO_PPDSDR_QSPI		MCF_REG08(0xFC0A4032)
+#define MCF_GPIO_PPDSDR_TIMER		MCF_REG08(0xFC0A4033)
+#define MCF_GPIO_PPDSDR_LCDDATAH	MCF_REG08(0xFC0A4035)
+#define MCF_GPIO_PPDSDR_LCDDATAM	MCF_REG08(0xFC0A4036)
+#define MCF_GPIO_PPDSDR_LCDDATAL	MCF_REG08(0xFC0A4037)
+#define MCF_GPIO_PPDSDR_LCDCTLH		MCF_REG08(0xFC0A4038)
+#define MCF_GPIO_PPDSDR_LCDCTLL		MCF_REG08(0xFC0A4039)
+#define MCF_GPIO_PCLRR_FECH		MCF_REG08(0xFC0A403C)
+#define MCF_GPIO_PCLRR_FECL		MCF_REG08(0xFC0A403D)
+#define MCF_GPIO_PCLRR_SSI		MCF_REG08(0xFC0A403E)
+#define MCF_GPIO_PCLRR_BUSCTL		MCF_REG08(0xFC0A403F)
+#define MCF_GPIO_PCLRR_BE		MCF_REG08(0xFC0A4040)
+#define MCF_GPIO_PCLRR_CS		MCF_REG08(0xFC0A4041)
+#define MCF_GPIO_PCLRR_PWM		MCF_REG08(0xFC0A4042)
+#define MCF_GPIO_PCLRR_FECI2C		MCF_REG08(0xFC0A4043)
+#define MCF_GPIO_PCLRR_UART		MCF_REG08(0xFC0A4045)
+#define MCF_GPIO_PCLRR_QSPI		MCF_REG08(0xFC0A4046)
+#define MCF_GPIO_PCLRR_TIMER		MCF_REG08(0xFC0A4047)
+#define MCF_GPIO_PCLRR_LCDDATAH		MCF_REG08(0xFC0A4049)
+#define MCF_GPIO_PCLRR_LCDDATAM		MCF_REG08(0xFC0A404A)
+#define MCF_GPIO_PCLRR_LCDDATAL		MCF_REG08(0xFC0A404B)
+#define MCF_GPIO_PCLRR_LCDCTLH		MCF_REG08(0xFC0A404C)
+#define MCF_GPIO_PCLRR_LCDCTLL		MCF_REG08(0xFC0A404D)
+#define MCF_GPIO_PAR_FEC		MCF_REG08(0xFC0A4050)
+#define MCF_GPIO_PAR_PWM		MCF_REG08(0xFC0A4051)
+#define MCF_GPIO_PAR_BUSCTL		MCF_REG08(0xFC0A4052)
+#define MCF_GPIO_PAR_FECI2C		MCF_REG08(0xFC0A4053)
+#define MCF_GPIO_PAR_BE			MCF_REG08(0xFC0A4054)
+#define MCF_GPIO_PAR_CS			MCF_REG08(0xFC0A4055)
+#define MCF_GPIO_PAR_SSI		MCF_REG16(0xFC0A4056)
+#define MCF_GPIO_PAR_UART		MCF_REG16(0xFC0A4058)
+#define MCF_GPIO_PAR_QSPI		MCF_REG16(0xFC0A405A)
+#define MCF_GPIO_PAR_TIMER		MCF_REG08(0xFC0A405C)
+#define MCF_GPIO_PAR_LCDDATA		MCF_REG08(0xFC0A405D)
+#define MCF_GPIO_PAR_LCDCTL		MCF_REG16(0xFC0A405E)
+#define MCF_GPIO_PAR_IRQ		MCF_REG16(0xFC0A4060)
+#define MCF_GPIO_MSCR_FLEXBUS		MCF_REG08(0xFC0A4064)
+#define MCF_GPIO_MSCR_SDRAM		MCF_REG08(0xFC0A4065)
+#define MCF_GPIO_DSCR_I2C		MCF_REG08(0xFC0A4068)
+#define MCF_GPIO_DSCR_PWM		MCF_REG08(0xFC0A4069)
+#define MCF_GPIO_DSCR_FEC		MCF_REG08(0xFC0A406A)
+#define MCF_GPIO_DSCR_UART		MCF_REG08(0xFC0A406B)
+#define MCF_GPIO_DSCR_QSPI		MCF_REG08(0xFC0A406C)
+#define MCF_GPIO_DSCR_TIMER		MCF_REG08(0xFC0A406D)
+#define MCF_GPIO_DSCR_SSI		MCF_REG08(0xFC0A406E)
+#define MCF_GPIO_DSCR_LCD		MCF_REG08(0xFC0A406F)
+#define MCF_GPIO_DSCR_DEBUG		MCF_REG08(0xFC0A4070)
+#define MCF_GPIO_DSCR_CLKRST		MCF_REG08(0xFC0A4071)
+#define MCF_GPIO_DSCR_IRQ		MCF_REG08(0xFC0A4072)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_FECH */
+#define MCF_GPIO_PODR_FECH_PODR_FECH0              (0x01)
+#define MCF_GPIO_PODR_FECH_PODR_FECH1              (0x02)
+#define MCF_GPIO_PODR_FECH_PODR_FECH2              (0x04)
+#define MCF_GPIO_PODR_FECH_PODR_FECH3              (0x08)
+#define MCF_GPIO_PODR_FECH_PODR_FECH4              (0x10)
+#define MCF_GPIO_PODR_FECH_PODR_FECH5              (0x20)
+#define MCF_GPIO_PODR_FECH_PODR_FECH6              (0x40)
+#define MCF_GPIO_PODR_FECH_PODR_FECH7              (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_FECL */
+#define MCF_GPIO_PODR_FECL_PODR_FECL0              (0x01)
+#define MCF_GPIO_PODR_FECL_PODR_FECL1              (0x02)
+#define MCF_GPIO_PODR_FECL_PODR_FECL2              (0x04)
+#define MCF_GPIO_PODR_FECL_PODR_FECL3              (0x08)
+#define MCF_GPIO_PODR_FECL_PODR_FECL4              (0x10)
+#define MCF_GPIO_PODR_FECL_PODR_FECL5              (0x20)
+#define MCF_GPIO_PODR_FECL_PODR_FECL6              (0x40)
+#define MCF_GPIO_PODR_FECL_PODR_FECL7              (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_SSI */
+#define MCF_GPIO_PODR_SSI_PODR_SSI0                (0x01)
+#define MCF_GPIO_PODR_SSI_PODR_SSI1                (0x02)
+#define MCF_GPIO_PODR_SSI_PODR_SSI2                (0x04)
+#define MCF_GPIO_PODR_SSI_PODR_SSI3                (0x08)
+#define MCF_GPIO_PODR_SSI_PODR_SSI4                (0x10)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_BUSCTL */
+#define MCF_GPIO_PODR_BUSCTL_POSDR_BUSCTL0         (0x01)
+#define MCF_GPIO_PODR_BUSCTL_PODR_BUSCTL1          (0x02)
+#define MCF_GPIO_PODR_BUSCTL_PODR_BUSCTL2          (0x04)
+#define MCF_GPIO_PODR_BUSCTL_PODR_BUSCTL3          (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_BE */
+#define MCF_GPIO_PODR_BE_PODR_BE0                  (0x01)
+#define MCF_GPIO_PODR_BE_PODR_BE1                  (0x02)
+#define MCF_GPIO_PODR_BE_PODR_BE2                  (0x04)
+#define MCF_GPIO_PODR_BE_PODR_BE3                  (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_CS */
+#define MCF_GPIO_PODR_CS_PODR_CS1                  (0x02)
+#define MCF_GPIO_PODR_CS_PODR_CS2                  (0x04)
+#define MCF_GPIO_PODR_CS_PODR_CS3                  (0x08)
+#define MCF_GPIO_PODR_CS_PODR_CS4                  (0x10)
+#define MCF_GPIO_PODR_CS_PODR_CS5                  (0x20)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_PWM */
+#define MCF_GPIO_PODR_PWM_PODR_PWM2                (0x04)
+#define MCF_GPIO_PODR_PWM_PODR_PWM3                (0x08)
+#define MCF_GPIO_PODR_PWM_PODR_PWM4                (0x10)
+#define MCF_GPIO_PODR_PWM_PODR_PWM5                (0x20)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_FECI2C */
+#define MCF_GPIO_PODR_FECI2C_PODR_FECI2C0          (0x01)
+#define MCF_GPIO_PODR_FECI2C_PODR_FECI2C1          (0x02)
+#define MCF_GPIO_PODR_FECI2C_PODR_FECI2C2          (0x04)
+#define MCF_GPIO_PODR_FECI2C_PODR_FECI2C3          (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_UART */
+#define MCF_GPIO_PODR_UART_PODR_UART0              (0x01)
+#define MCF_GPIO_PODR_UART_PODR_UART1              (0x02)
+#define MCF_GPIO_PODR_UART_PODR_UART2              (0x04)
+#define MCF_GPIO_PODR_UART_PODR_UART3              (0x08)
+#define MCF_GPIO_PODR_UART_PODR_UART4              (0x10)
+#define MCF_GPIO_PODR_UART_PODR_UART5              (0x20)
+#define MCF_GPIO_PODR_UART_PODR_UART6              (0x40)
+#define MCF_GPIO_PODR_UART_PODR_UART7              (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_QSPI */
+#define MCF_GPIO_PODR_QSPI_PODR_QSPI0              (0x01)
+#define MCF_GPIO_PODR_QSPI_PODR_QSPI1              (0x02)
+#define MCF_GPIO_PODR_QSPI_PODR_QSPI2              (0x04)
+#define MCF_GPIO_PODR_QSPI_PODR_QSPI3              (0x08)
+#define MCF_GPIO_PODR_QSPI_PODR_QSPI4              (0x10)
+#define MCF_GPIO_PODR_QSPI_PODR_QSPI5              (0x20)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_TIMER */
+#define MCF_GPIO_PODR_TIMER_PODR_TIMER0            (0x01)
+#define MCF_GPIO_PODR_TIMER_PODR_TIMER1            (0x02)
+#define MCF_GPIO_PODR_TIMER_PODR_TIMER2            (0x04)
+#define MCF_GPIO_PODR_TIMER_PODR_TIMER3            (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_LCDDATAH */
+#define MCF_GPIO_PODR_LCDDATAH_PODR_LCDDATAH0      (0x01)
+#define MCF_GPIO_PODR_LCDDATAH_PODR_LCDDATAH1      (0x02)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_LCDDATAM */
+#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM0      (0x01)
+#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM1      (0x02)
+#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM2      (0x04)
+#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM3      (0x08)
+#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM4      (0x10)
+#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM5      (0x20)
+#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM6      (0x40)
+#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM7      (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_LCDDATAL */
+#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL0      (0x01)
+#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL1      (0x02)
+#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL2      (0x04)
+#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL3      (0x08)
+#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL4      (0x10)
+#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL5      (0x20)
+#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL6      (0x40)
+#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL7      (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_LCDCTLH */
+#define MCF_GPIO_PODR_LCDCTLH_PODR_LCDCTLH0        (0x01)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_LCDCTLL */
+#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL0        (0x01)
+#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL1        (0x02)
+#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL2        (0x04)
+#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL3        (0x08)
+#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL4        (0x10)
+#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL5        (0x20)
+#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL6        (0x40)
+#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL7        (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_FECH */
+#define MCF_GPIO_PDDR_FECH_PDDR_FECH0              (0x01)
+#define MCF_GPIO_PDDR_FECH_PDDR_FECH1              (0x02)
+#define MCF_GPIO_PDDR_FECH_PDDR_FECH2              (0x04)
+#define MCF_GPIO_PDDR_FECH_PDDR_FECH3              (0x08)
+#define MCF_GPIO_PDDR_FECH_PDDR_FECH4              (0x10)
+#define MCF_GPIO_PDDR_FECH_PDDR_FECH5              (0x20)
+#define MCF_GPIO_PDDR_FECH_PDDR_FECH6              (0x40)
+#define MCF_GPIO_PDDR_FECH_PDDR_FECH7              (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_FECL */
+#define MCF_GPIO_PDDR_FECL_PDDR_FECL0              (0x01)
+#define MCF_GPIO_PDDR_FECL_PDDR_FECL1              (0x02)
+#define MCF_GPIO_PDDR_FECL_PDDR_FECL2              (0x04)
+#define MCF_GPIO_PDDR_FECL_PDDR_FECL3              (0x08)
+#define MCF_GPIO_PDDR_FECL_PDDR_FECL4              (0x10)
+#define MCF_GPIO_PDDR_FECL_PDDR_FECL5              (0x20)
+#define MCF_GPIO_PDDR_FECL_PDDR_FECL6              (0x40)
+#define MCF_GPIO_PDDR_FECL_PDDR_FECL7              (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_SSI */
+#define MCF_GPIO_PDDR_SSI_PDDR_SSI0                (0x01)
+#define MCF_GPIO_PDDR_SSI_PDDR_SSI1                (0x02)
+#define MCF_GPIO_PDDR_SSI_PDDR_SSI2                (0x04)
+#define MCF_GPIO_PDDR_SSI_PDDR_SSI3                (0x08)
+#define MCF_GPIO_PDDR_SSI_PDDR_SSI4                (0x10)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_BUSCTL */
+#define MCF_GPIO_PDDR_BUSCTL_POSDR_BUSCTL0         (0x01)
+#define MCF_GPIO_PDDR_BUSCTL_PDDR_BUSCTL1          (0x02)
+#define MCF_GPIO_PDDR_BUSCTL_PDDR_BUSCTL2          (0x04)
+#define MCF_GPIO_PDDR_BUSCTL_PDDR_BUSCTL3          (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_BE */
+#define MCF_GPIO_PDDR_BE_PDDR_BE0                  (0x01)
+#define MCF_GPIO_PDDR_BE_PDDR_BE1                  (0x02)
+#define MCF_GPIO_PDDR_BE_PDDR_BE2                  (0x04)
+#define MCF_GPIO_PDDR_BE_PDDR_BE3                  (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_CS */
+#define MCF_GPIO_PDDR_CS_PDDR_CS1                  (0x02)
+#define MCF_GPIO_PDDR_CS_PDDR_CS2                  (0x04)
+#define MCF_GPIO_PDDR_CS_PDDR_CS3                  (0x08)
+#define MCF_GPIO_PDDR_CS_PDDR_CS4                  (0x10)
+#define MCF_GPIO_PDDR_CS_PDDR_CS5                  (0x20)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_PWM */
+#define MCF_GPIO_PDDR_PWM_PDDR_PWM2                (0x04)
+#define MCF_GPIO_PDDR_PWM_PDDR_PWM3                (0x08)
+#define MCF_GPIO_PDDR_PWM_PDDR_PWM4                (0x10)
+#define MCF_GPIO_PDDR_PWM_PDDR_PWM5                (0x20)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_FECI2C */
+#define MCF_GPIO_PDDR_FECI2C_PDDR_FECI2C0          (0x01)
+#define MCF_GPIO_PDDR_FECI2C_PDDR_FECI2C1          (0x02)
+#define MCF_GPIO_PDDR_FECI2C_PDDR_FECI2C2          (0x04)
+#define MCF_GPIO_PDDR_FECI2C_PDDR_FECI2C3          (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_UART */
+#define MCF_GPIO_PDDR_UART_PDDR_UART0              (0x01)
+#define MCF_GPIO_PDDR_UART_PDDR_UART1              (0x02)
+#define MCF_GPIO_PDDR_UART_PDDR_UART2              (0x04)
+#define MCF_GPIO_PDDR_UART_PDDR_UART3              (0x08)
+#define MCF_GPIO_PDDR_UART_PDDR_UART4              (0x10)
+#define MCF_GPIO_PDDR_UART_PDDR_UART5              (0x20)
+#define MCF_GPIO_PDDR_UART_PDDR_UART6              (0x40)
+#define MCF_GPIO_PDDR_UART_PDDR_UART7              (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_QSPI */
+#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI0              (0x01)
+#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI1              (0x02)
+#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI2              (0x04)
+#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI3              (0x08)
+#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI4              (0x10)
+#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI5              (0x20)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_TIMER */
+#define MCF_GPIO_PDDR_TIMER_PDDR_TIMER0            (0x01)
+#define MCF_GPIO_PDDR_TIMER_PDDR_TIMER1            (0x02)
+#define MCF_GPIO_PDDR_TIMER_PDDR_TIMER2            (0x04)
+#define MCF_GPIO_PDDR_TIMER_PDDR_TIMER3            (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_LCDDATAH */
+#define MCF_GPIO_PDDR_LCDDATAH_PDDR_LCDDATAH0      (0x01)
+#define MCF_GPIO_PDDR_LCDDATAH_PDDR_LCDDATAH1      (0x02)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_LCDDATAM */
+#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM0      (0x01)
+#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM1      (0x02)
+#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM2      (0x04)
+#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM3      (0x08)
+#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM4      (0x10)
+#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM5      (0x20)
+#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM6      (0x40)
+#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM7      (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_LCDDATAL */
+#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL0      (0x01)
+#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL1      (0x02)
+#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL2      (0x04)
+#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL3      (0x08)
+#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL4      (0x10)
+#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL5      (0x20)
+#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL6      (0x40)
+#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL7      (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_LCDCTLH */
+#define MCF_GPIO_PDDR_LCDCTLH_PDDR_LCDCTLH0        (0x01)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_LCDCTLL */
+#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL0        (0x01)
+#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL1        (0x02)
+#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL2        (0x04)
+#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL3        (0x08)
+#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL4        (0x10)
+#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL5        (0x20)
+#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL6        (0x40)
+#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL7        (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_FECH */
+#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH0          (0x01)
+#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH1          (0x02)
+#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH2          (0x04)
+#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH3          (0x08)
+#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH4          (0x10)
+#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH5          (0x20)
+#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH6          (0x40)
+#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH7          (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_FECL */
+#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL0          (0x01)
+#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL1          (0x02)
+#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL2          (0x04)
+#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL3          (0x08)
+#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL4          (0x10)
+#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL5          (0x20)
+#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL6          (0x40)
+#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL7          (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_SSI */
+#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI0            (0x01)
+#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI1            (0x02)
+#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI2            (0x04)
+#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI3            (0x08)
+#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI4            (0x10)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_BUSCTL */
+#define MCF_GPIO_PPDSDR_BUSCTL_POSDR_BUSCTL0       (0x01)
+#define MCF_GPIO_PPDSDR_BUSCTL_PPDSDR_BUSCTL1      (0x02)
+#define MCF_GPIO_PPDSDR_BUSCTL_PPDSDR_BUSCTL2      (0x04)
+#define MCF_GPIO_PPDSDR_BUSCTL_PPDSDR_BUSCTL3      (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_BE */
+#define MCF_GPIO_PPDSDR_BE_PPDSDR_BE0              (0x01)
+#define MCF_GPIO_PPDSDR_BE_PPDSDR_BE1              (0x02)
+#define MCF_GPIO_PPDSDR_BE_PPDSDR_BE2              (0x04)
+#define MCF_GPIO_PPDSDR_BE_PPDSDR_BE3              (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_CS */
+#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS1              (0x02)
+#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS2              (0x04)
+#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS3              (0x08)
+#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS4              (0x10)
+#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS5              (0x20)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_PWM */
+#define MCF_GPIO_PPDSDR_PWM_PPDSDR_PWM2            (0x04)
+#define MCF_GPIO_PPDSDR_PWM_PPDSDR_PWM3            (0x08)
+#define MCF_GPIO_PPDSDR_PWM_PPDSDR_PWM4            (0x10)
+#define MCF_GPIO_PPDSDR_PWM_PPDSDR_PWM5            (0x20)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_FECI2C */
+#define MCF_GPIO_PPDSDR_FECI2C_PPDSDR_FECI2C0      (0x01)
+#define MCF_GPIO_PPDSDR_FECI2C_PPDSDR_FECI2C1      (0x02)
+#define MCF_GPIO_PPDSDR_FECI2C_PPDSDR_FECI2C2      (0x04)
+#define MCF_GPIO_PPDSDR_FECI2C_PPDSDR_FECI2C3      (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_UART */
+#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART0          (0x01)
+#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART1          (0x02)
+#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART2          (0x04)
+#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART3          (0x08)
+#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART4          (0x10)
+#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART5          (0x20)
+#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART6          (0x40)
+#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART7          (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_QSPI */
+#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI0          (0x01)
+#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI1          (0x02)
+#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI2          (0x04)
+#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI3          (0x08)
+#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI4          (0x10)
+#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI5          (0x20)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_TIMER */
+#define MCF_GPIO_PPDSDR_TIMER_PPDSDR_TIMER0        (0x01)
+#define MCF_GPIO_PPDSDR_TIMER_PPDSDR_TIMER1        (0x02)
+#define MCF_GPIO_PPDSDR_TIMER_PPDSDR_TIMER2        (0x04)
+#define MCF_GPIO_PPDSDR_TIMER_PPDSDR_TIMER3        (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDDATAH */
+#define MCF_GPIO_PPDSDR_LCDDATAH_PPDSDR_LCDDATAH0  (0x01)
+#define MCF_GPIO_PPDSDR_LCDDATAH_PPDSDR_LCDDATAH1  (0x02)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDDATAM */
+#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM0  (0x01)
+#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM1  (0x02)
+#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM2  (0x04)
+#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM3  (0x08)
+#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM4  (0x10)
+#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM5  (0x20)
+#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM6  (0x40)
+#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM7  (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDDATAL */
+#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL0  (0x01)
+#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL1  (0x02)
+#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL2  (0x04)
+#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL3  (0x08)
+#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL4  (0x10)
+#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL5  (0x20)
+#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL6  (0x40)
+#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL7  (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDCTLH */
+#define MCF_GPIO_PPDSDR_LCDCTLH_PPDSDR_LCDCTLH0    (0x01)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDCTLL */
+#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL0    (0x01)
+#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL1    (0x02)
+#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL2    (0x04)
+#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL3    (0x08)
+#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL4    (0x10)
+#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL5    (0x20)
+#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL6    (0x40)
+#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL7    (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_FECH */
+#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH0            (0x01)
+#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH1            (0x02)
+#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH2            (0x04)
+#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH3            (0x08)
+#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH4            (0x10)
+#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH5            (0x20)
+#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH6            (0x40)
+#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH7            (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_FECL */
+#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL0            (0x01)
+#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL1            (0x02)
+#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL2            (0x04)
+#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL3            (0x08)
+#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL4            (0x10)
+#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL5            (0x20)
+#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL6            (0x40)
+#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL7            (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_SSI */
+#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI0              (0x01)
+#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI1              (0x02)
+#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI2              (0x04)
+#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI3              (0x08)
+#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI4              (0x10)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_BUSCTL */
+#define MCF_GPIO_PCLRR_BUSCTL_POSDR_BUSCTL0        (0x01)
+#define MCF_GPIO_PCLRR_BUSCTL_PCLRR_BUSCTL1        (0x02)
+#define MCF_GPIO_PCLRR_BUSCTL_PCLRR_BUSCTL2        (0x04)
+#define MCF_GPIO_PCLRR_BUSCTL_PCLRR_BUSCTL3        (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_BE */
+#define MCF_GPIO_PCLRR_BE_PCLRR_BE0                (0x01)
+#define MCF_GPIO_PCLRR_BE_PCLRR_BE1                (0x02)
+#define MCF_GPIO_PCLRR_BE_PCLRR_BE2                (0x04)
+#define MCF_GPIO_PCLRR_BE_PCLRR_BE3                (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_CS */
+#define MCF_GPIO_PCLRR_CS_PCLRR_CS1                (0x02)
+#define MCF_GPIO_PCLRR_CS_PCLRR_CS2                (0x04)
+#define MCF_GPIO_PCLRR_CS_PCLRR_CS3                (0x08)
+#define MCF_GPIO_PCLRR_CS_PCLRR_CS4                (0x10)
+#define MCF_GPIO_PCLRR_CS_PCLRR_CS5                (0x20)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_PWM */
+#define MCF_GPIO_PCLRR_PWM_PCLRR_PWM2              (0x04)
+#define MCF_GPIO_PCLRR_PWM_PCLRR_PWM3              (0x08)
+#define MCF_GPIO_PCLRR_PWM_PCLRR_PWM4              (0x10)
+#define MCF_GPIO_PCLRR_PWM_PCLRR_PWM5              (0x20)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_FECI2C */
+#define MCF_GPIO_PCLRR_FECI2C_PCLRR_FECI2C0        (0x01)
+#define MCF_GPIO_PCLRR_FECI2C_PCLRR_FECI2C1        (0x02)
+#define MCF_GPIO_PCLRR_FECI2C_PCLRR_FECI2C2        (0x04)
+#define MCF_GPIO_PCLRR_FECI2C_PCLRR_FECI2C3        (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_UART */
+#define MCF_GPIO_PCLRR_UART_PCLRR_UART0            (0x01)
+#define MCF_GPIO_PCLRR_UART_PCLRR_UART1            (0x02)
+#define MCF_GPIO_PCLRR_UART_PCLRR_UART2            (0x04)
+#define MCF_GPIO_PCLRR_UART_PCLRR_UART3            (0x08)
+#define MCF_GPIO_PCLRR_UART_PCLRR_UART4            (0x10)
+#define MCF_GPIO_PCLRR_UART_PCLRR_UART5            (0x20)
+#define MCF_GPIO_PCLRR_UART_PCLRR_UART6            (0x40)
+#define MCF_GPIO_PCLRR_UART_PCLRR_UART7            (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_QSPI */
+#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI0            (0x01)
+#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI1            (0x02)
+#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI2            (0x04)
+#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI3            (0x08)
+#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI4            (0x10)
+#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI5            (0x20)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_TIMER */
+#define MCF_GPIO_PCLRR_TIMER_PCLRR_TIMER0          (0x01)
+#define MCF_GPIO_PCLRR_TIMER_PCLRR_TIMER1          (0x02)
+#define MCF_GPIO_PCLRR_TIMER_PCLRR_TIMER2          (0x04)
+#define MCF_GPIO_PCLRR_TIMER_PCLRR_TIMER3          (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDDATAH */
+#define MCF_GPIO_PCLRR_LCDDATAH_PCLRR_LCDDATAH0    (0x01)
+#define MCF_GPIO_PCLRR_LCDDATAH_PCLRR_LCDDATAH1    (0x02)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDDATAM */
+#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM0    (0x01)
+#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM1    (0x02)
+#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM2    (0x04)
+#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM3    (0x08)
+#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM4    (0x10)
+#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM5    (0x20)
+#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM6    (0x40)
+#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM7    (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDDATAL */
+#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL0    (0x01)
+#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL1    (0x02)
+#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL2    (0x04)
+#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL3    (0x08)
+#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL4    (0x10)
+#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL5    (0x20)
+#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL6    (0x40)
+#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL7    (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDCTLH */
+#define MCF_GPIO_PCLRR_LCDCTLH_PCLRR_LCDCTLH0      (0x01)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDCTLL */
+#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL0      (0x01)
+#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL1      (0x02)
+#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL2      (0x04)
+#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL3      (0x08)
+#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL4      (0x10)
+#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL5      (0x20)
+#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL6      (0x40)
+#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL7      (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PAR_FEC */
+#define MCF_GPIO_PAR_FEC_PAR_FEC_MII(x)            (((x)&0x03)<<0)
+#define MCF_GPIO_PAR_FEC_PAR_FEC_7W(x)             (((x)&0x03)<<2)
+#define MCF_GPIO_PAR_FEC_PAR_FEC_7W_GPIO           (0x00)
+#define MCF_GPIO_PAR_FEC_PAR_FEC_7W_URTS1          (0x04)
+#define MCF_GPIO_PAR_FEC_PAR_FEC_7W_FEC            (0x0C)
+#define MCF_GPIO_PAR_FEC_PAR_FEC_MII_GPIO          (0x00)
+#define MCF_GPIO_PAR_FEC_PAR_FEC_MII_UART          (0x01)
+#define MCF_GPIO_PAR_FEC_PAR_FEC_MII_FEC           (0x03)
+
+/* Bit definitions and macros for MCF_GPIO_PAR_PWM */
+#define MCF_GPIO_PAR_PWM_PAR_PWM1(x)               (((x)&0x03)<<0)
+#define MCF_GPIO_PAR_PWM_PAR_PWM3(x)               (((x)&0x03)<<2)
+#define MCF_GPIO_PAR_PWM_PAR_PWM5                  (0x10)
+#define MCF_GPIO_PAR_PWM_PAR_PWM7                  (0x20)
+
+/* Bit definitions and macros for MCF_GPIO_PAR_BUSCTL */
+#define MCF_GPIO_PAR_BUSCTL_PAR_TS(x)              (((x)&0x03)<<3)
+#define MCF_GPIO_PAR_BUSCTL_PAR_RWB                (0x20)
+#define MCF_GPIO_PAR_BUSCTL_PAR_TA                 (0x40)
+#define MCF_GPIO_PAR_BUSCTL_PAR_OE                 (0x80)
+#define MCF_GPIO_PAR_BUSCTL_PAR_OE_GPIO            (0x00)
+#define MCF_GPIO_PAR_BUSCTL_PAR_OE_OE              (0x80)
+#define MCF_GPIO_PAR_BUSCTL_PAR_TA_GPIO            (0x00)
+#define MCF_GPIO_PAR_BUSCTL_PAR_TA_TA              (0x40)
+#define MCF_GPIO_PAR_BUSCTL_PAR_RWB_GPIO           (0x00)
+#define MCF_GPIO_PAR_BUSCTL_PAR_RWB_RWB            (0x20)
+#define MCF_GPIO_PAR_BUSCTL_PAR_TS_GPIO            (0x00)
+#define MCF_GPIO_PAR_BUSCTL_PAR_TS_DACK0           (0x10)
+#define MCF_GPIO_PAR_BUSCTL_PAR_TS_TS              (0x18)
+
+/* Bit definitions and macros for MCF_GPIO_PAR_FECI2C */
+#define MCF_GPIO_PAR_FECI2C_PAR_SDA(x)             (((x)&0x03)<<0)
+#define MCF_GPIO_PAR_FECI2C_PAR_SCL(x)             (((x)&0x03)<<2)
+#define MCF_GPIO_PAR_FECI2C_PAR_MDIO(x)            (((x)&0x03)<<4)
+#define MCF_GPIO_PAR_FECI2C_PAR_MDC(x)             (((x)&0x03)<<6)
+#define MCF_GPIO_PAR_FECI2C_PAR_MDC_GPIO           (0x00)
+#define MCF_GPIO_PAR_FECI2C_PAR_MDC_UTXD2          (0x40)
+#define MCF_GPIO_PAR_FECI2C_PAR_MDC_SCL            (0x80)
+#define MCF_GPIO_PAR_FECI2C_PAR_MDC_EMDC           (0xC0)
+#define MCF_GPIO_PAR_FECI2C_PAR_MDIO_GPIO          (0x00)
+#define MCF_GPIO_PAR_FECI2C_PAR_MDIO_URXD2         (0x10)
+#define MCF_GPIO_PAR_FECI2C_PAR_MDIO_SDA           (0x20)
+#define MCF_GPIO_PAR_FECI2C_PAR_MDIO_EMDIO         (0x30)
+#define MCF_GPIO_PAR_FECI2C_PAR_SCL_GPIO           (0x00)
+#define MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2          (0x04)
+#define MCF_GPIO_PAR_FECI2C_PAR_SCL_SCL            (0x0C)
+#define MCF_GPIO_PAR_FECI2C_PAR_SDA_GPIO           (0x00)
+#define MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2          (0x02)
+#define MCF_GPIO_PAR_FECI2C_PAR_SDA_SDA            (0x03)
+
+/* Bit definitions and macros for MCF_GPIO_PAR_BE */
+#define MCF_GPIO_PAR_BE_PAR_BE0                    (0x01)
+#define MCF_GPIO_PAR_BE_PAR_BE1                    (0x02)
+#define MCF_GPIO_PAR_BE_PAR_BE2                    (0x04)
+#define MCF_GPIO_PAR_BE_PAR_BE3                    (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PAR_CS */
+#define MCF_GPIO_PAR_CS_PAR_CS1                    (0x02)
+#define MCF_GPIO_PAR_CS_PAR_CS2                    (0x04)
+#define MCF_GPIO_PAR_CS_PAR_CS3                    (0x08)
+#define MCF_GPIO_PAR_CS_PAR_CS4                    (0x10)
+#define MCF_GPIO_PAR_CS_PAR_CS5                    (0x20)
+#define MCF_GPIO_PAR_CS_PAR_CS_CS1_GPIO            (0x00)
+#define MCF_GPIO_PAR_CS_PAR_CS_CS1_SDCS1           (0x01)
+#define MCF_GPIO_PAR_CS_PAR_CS_CS1_CS1             (0x03)
+
+/* Bit definitions and macros for MCF_GPIO_PAR_SSI */
+#define MCF_GPIO_PAR_SSI_PAR_MCLK                  (0x0080)
+#define MCF_GPIO_PAR_SSI_PAR_TXD(x)                (((x)&0x0003)<<8)
+#define MCF_GPIO_PAR_SSI_PAR_RXD(x)                (((x)&0x0003)<<10)
+#define MCF_GPIO_PAR_SSI_PAR_FS(x)                 (((x)&0x0003)<<12)
+#define MCF_GPIO_PAR_SSI_PAR_BCLK(x)               (((x)&0x0003)<<14)
+
+/* Bit definitions and macros for MCF_GPIO_PAR_UART */
+#define MCF_GPIO_PAR_UART_PAR_UTXD0                (0x0001)
+#define MCF_GPIO_PAR_UART_PAR_URXD0                (0x0002)
+#define MCF_GPIO_PAR_UART_PAR_URTS0                (0x0004)
+#define MCF_GPIO_PAR_UART_PAR_UCTS0                (0x0008)
+#define MCF_GPIO_PAR_UART_PAR_UTXD1(x)             (((x)&0x0003)<<4)
+#define MCF_GPIO_PAR_UART_PAR_URXD1(x)             (((x)&0x0003)<<6)
+#define MCF_GPIO_PAR_UART_PAR_URTS1(x)             (((x)&0x0003)<<8)
+#define MCF_GPIO_PAR_UART_PAR_UCTS1(x)             (((x)&0x0003)<<10)
+#define MCF_GPIO_PAR_UART_PAR_UCTS1_GPIO           (0x0000)
+#define MCF_GPIO_PAR_UART_PAR_UCTS1_SSI_BCLK       (0x0800)
+#define MCF_GPIO_PAR_UART_PAR_UCTS1_ULPI_D7        (0x0400)
+#define MCF_GPIO_PAR_UART_PAR_UCTS1_UCTS1          (0x0C00)
+#define MCF_GPIO_PAR_UART_PAR_URTS1_GPIO           (0x0000)
+#define MCF_GPIO_PAR_UART_PAR_URTS1_SSI_FS         (0x0200)
+#define MCF_GPIO_PAR_UART_PAR_URTS1_ULPI_D6        (0x0100)
+#define MCF_GPIO_PAR_UART_PAR_URTS1_URTS1          (0x0300)
+#define MCF_GPIO_PAR_UART_PAR_URXD1_GPIO           (0x0000)
+#define MCF_GPIO_PAR_UART_PAR_URXD1_SSI_RXD        (0x0080)
+#define MCF_GPIO_PAR_UART_PAR_URXD1_ULPI_D5        (0x0040)
+#define MCF_GPIO_PAR_UART_PAR_URXD1_URXD1          (0x00C0)
+#define MCF_GPIO_PAR_UART_PAR_UTXD1_GPIO           (0x0000)
+#define MCF_GPIO_PAR_UART_PAR_UTXD1_SSI_TXD        (0x0020)
+#define MCF_GPIO_PAR_UART_PAR_UTXD1_ULPI_D4        (0x0010)
+#define MCF_GPIO_PAR_UART_PAR_UTXD1_UTXD1          (0x0030)
+
+/* Bit definitions and macros for MCF_GPIO_PAR_QSPI */
+#define MCF_GPIO_PAR_QSPI_PAR_SCK(x)               (((x)&0x0003)<<4)
+#define MCF_GPIO_PAR_QSPI_PAR_DOUT(x)              (((x)&0x0003)<<6)
+#define MCF_GPIO_PAR_QSPI_PAR_DIN(x)               (((x)&0x0003)<<8)
+#define MCF_GPIO_PAR_QSPI_PAR_PCS0(x)              (((x)&0x0003)<<10)
+#define MCF_GPIO_PAR_QSPI_PAR_PCS1(x)              (((x)&0x0003)<<12)
+#define MCF_GPIO_PAR_QSPI_PAR_PCS2(x)              (((x)&0x0003)<<14)
+
+/* Bit definitions and macros for MCF_GPIO_PAR_TIMER */
+#define MCF_GPIO_PAR_TIMER_PAR_TIN0(x)             (((x)&0x03)<<0)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN1(x)             (((x)&0x03)<<2)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN2(x)             (((x)&0x03)<<4)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN3(x)             (((x)&0x03)<<6)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN3_GPIO           (0x00)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN3_TOUT3          (0x80)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN3_URXD2          (0x40)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN3_TIN3           (0xC0)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN2_GPIO           (0x00)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN2_TOUT2          (0x20)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN2_UTXD2          (0x10)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN2_TIN2           (0x30)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN1_GPIO           (0x00)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN1_TOUT1          (0x08)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN1_DACK1          (0x04)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN1_TIN1           (0x0C)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN0_GPIO           (0x00)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN0_TOUT0          (0x02)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN0_DREQ0          (0x01)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN0_TIN0           (0x03)
+
+/* Bit definitions and macros for MCF_GPIO_PAR_LCDDATA */
+#define MCF_GPIO_PAR_LCDDATA_PAR_LD7_0(x)          (((x)&0x03)<<0)
+#define MCF_GPIO_PAR_LCDDATA_PAR_LD15_8(x)         (((x)&0x03)<<2)
+#define MCF_GPIO_PAR_LCDDATA_PAR_LD16(x)           (((x)&0x03)<<4)
+#define MCF_GPIO_PAR_LCDDATA_PAR_LD17(x)           (((x)&0x03)<<6)
+
+/* Bit definitions and macros for MCF_GPIO_PAR_LCDCTL */
+#define MCF_GPIO_PAR_LCDCTL_PAR_CLS                (0x0001)
+#define MCF_GPIO_PAR_LCDCTL_PAR_PS                 (0x0002)
+#define MCF_GPIO_PAR_LCDCTL_PAR_REV                (0x0004)
+#define MCF_GPIO_PAR_LCDCTL_PAR_SPL_SPR            (0x0008)
+#define MCF_GPIO_PAR_LCDCTL_PAR_CONTRAST           (0x0010)
+#define MCF_GPIO_PAR_LCDCTL_PAR_LSCLK              (0x0020)
+#define MCF_GPIO_PAR_LCDCTL_PAR_LP_HSYNC           (0x0040)
+#define MCF_GPIO_PAR_LCDCTL_PAR_FLM_VSYNC          (0x0080)
+#define MCF_GPIO_PAR_LCDCTL_PAR_ACD_OE             (0x0100)
+
+/* Bit definitions and macros for MCF_GPIO_PAR_IRQ */
+#define MCF_GPIO_PAR_IRQ_PAR_IRQ1(x)               (((x)&0x0003)<<4)
+#define MCF_GPIO_PAR_IRQ_PAR_IRQ2(x)               (((x)&0x0003)<<6)
+#define MCF_GPIO_PAR_IRQ_PAR_IRQ4(x)               (((x)&0x0003)<<8)
+#define MCF_GPIO_PAR_IRQ_PAR_IRQ5(x)               (((x)&0x0003)<<10)
+#define MCF_GPIO_PAR_IRQ_PAR_IRQ6(x)               (((x)&0x0003)<<12)
+
+/* Bit definitions and macros for MCF_GPIO_MSCR_FLEXBUS */
+#define MCF_GPIO_MSCR_FLEXBUS_MSCR_ADDRCTL(x)      (((x)&0x03)<<0)
+#define MCF_GPIO_MSCR_FLEXBUS_MSCR_DLOWER(x)       (((x)&0x03)<<2)
+#define MCF_GPIO_MSCR_FLEXBUS_MSCR_DUPPER(x)       (((x)&0x03)<<4)
+
+/* Bit definitions and macros for MCF_GPIO_MSCR_SDRAM */
+#define MCF_GPIO_MSCR_SDRAM_MSCR_SDRAM(x)          (((x)&0x03)<<0)
+#define MCF_GPIO_MSCR_SDRAM_MSCR_SDCLK(x)          (((x)&0x03)<<2)
+#define MCF_GPIO_MSCR_SDRAM_MSCR_SDCLKB(x)         (((x)&0x03)<<4)
+
+/* Bit definitions and macros for MCF_GPIO_DSCR_I2C */
+#define MCF_GPIO_DSCR_I2C_I2C_DSE(x)               (((x)&0x03)<<0)
+
+/* Bit definitions and macros for MCF_GPIO_DSCR_PWM */
+#define MCF_GPIO_DSCR_PWM_PWM_DSE(x)               (((x)&0x03)<<0)
+
+/* Bit definitions and macros for MCF_GPIO_DSCR_FEC */
+#define MCF_GPIO_DSCR_FEC_FEC_DSE(x)               (((x)&0x03)<<0)
+
+/* Bit definitions and macros for MCF_GPIO_DSCR_UART */
+#define MCF_GPIO_DSCR_UART_UART0_DSE(x)            (((x)&0x03)<<0)
+#define MCF_GPIO_DSCR_UART_UART1_DSE(x)            (((x)&0x03)<<2)
+
+/* Bit definitions and macros for MCF_GPIO_DSCR_QSPI */
+#define MCF_GPIO_DSCR_QSPI_QSPI_DSE(x)             (((x)&0x03)<<0)
+
+/* Bit definitions and macros for MCF_GPIO_DSCR_TIMER */
+#define MCF_GPIO_DSCR_TIMER_TIMER_DSE(x)           (((x)&0x03)<<0)
+
+/* Bit definitions and macros for MCF_GPIO_DSCR_SSI */
+#define MCF_GPIO_DSCR_SSI_SSI_DSE(x)               (((x)&0x03)<<0)
+
+/* Bit definitions and macros for MCF_GPIO_DSCR_LCD */
+#define MCF_GPIO_DSCR_LCD_LCD_DSE(x)               (((x)&0x03)<<0)
+
+/* Bit definitions and macros for MCF_GPIO_DSCR_DEBUG */
+#define MCF_GPIO_DSCR_DEBUG_DEBUG_DSE(x)           (((x)&0x03)<<0)
+
+/* Bit definitions and macros for MCF_GPIO_DSCR_CLKRST */
+#define MCF_GPIO_DSCR_CLKRST_CLKRST_DSE(x)         (((x)&0x03)<<0)
+
+/* Bit definitions and macros for MCF_GPIO_DSCR_IRQ */
+#define MCF_GPIO_DSCR_IRQ_IRQ_DSE(x)               (((x)&0x03)<<0)
+
+/*********************************************************************
+ *
+ * Interrupt Controller (INTC)
+ *
+ *********************************************************************/
+
+/* Register read/write macros */
+#define MCF_INTC0_IPRH             MCF_REG32(0xFC048000)
+#define MCF_INTC0_IPRL             MCF_REG32(0xFC048004)
+#define MCF_INTC0_IMRH             MCF_REG32(0xFC048008)
+#define MCF_INTC0_IMRL             MCF_REG32(0xFC04800C)
+#define MCF_INTC0_INTFRCH          MCF_REG32(0xFC048010)
+#define MCF_INTC0_INTFRCL          MCF_REG32(0xFC048014)
+#define MCF_INTC0_ICONFIG          MCF_REG16(0xFC04801A)
+#define MCF_INTC0_SIMR             MCF_REG08(0xFC04801C)
+#define MCF_INTC0_CIMR             MCF_REG08(0xFC04801D)
+#define MCF_INTC0_CLMASK           MCF_REG08(0xFC04801E)
+#define MCF_INTC0_SLMASK           MCF_REG08(0xFC04801F)
+#define MCF_INTC0_ICR0             MCF_REG08(0xFC048040)
+#define MCF_INTC0_ICR1             MCF_REG08(0xFC048041)
+#define MCF_INTC0_ICR2             MCF_REG08(0xFC048042)
+#define MCF_INTC0_ICR3             MCF_REG08(0xFC048043)
+#define MCF_INTC0_ICR4             MCF_REG08(0xFC048044)
+#define MCF_INTC0_ICR5             MCF_REG08(0xFC048045)
+#define MCF_INTC0_ICR6             MCF_REG08(0xFC048046)
+#define MCF_INTC0_ICR7             MCF_REG08(0xFC048047)
+#define MCF_INTC0_ICR8             MCF_REG08(0xFC048048)
+#define MCF_INTC0_ICR9             MCF_REG08(0xFC048049)
+#define MCF_INTC0_ICR10            MCF_REG08(0xFC04804A)
+#define MCF_INTC0_ICR11            MCF_REG08(0xFC04804B)
+#define MCF_INTC0_ICR12            MCF_REG08(0xFC04804C)
+#define MCF_INTC0_ICR13            MCF_REG08(0xFC04804D)
+#define MCF_INTC0_ICR14            MCF_REG08(0xFC04804E)
+#define MCF_INTC0_ICR15            MCF_REG08(0xFC04804F)
+#define MCF_INTC0_ICR16            MCF_REG08(0xFC048050)
+#define MCF_INTC0_ICR17            MCF_REG08(0xFC048051)
+#define MCF_INTC0_ICR18            MCF_REG08(0xFC048052)
+#define MCF_INTC0_ICR19            MCF_REG08(0xFC048053)
+#define MCF_INTC0_ICR20            MCF_REG08(0xFC048054)
+#define MCF_INTC0_ICR21            MCF_REG08(0xFC048055)
+#define MCF_INTC0_ICR22            MCF_REG08(0xFC048056)
+#define MCF_INTC0_ICR23            MCF_REG08(0xFC048057)
+#define MCF_INTC0_ICR24            MCF_REG08(0xFC048058)
+#define MCF_INTC0_ICR25            MCF_REG08(0xFC048059)
+#define MCF_INTC0_ICR26            MCF_REG08(0xFC04805A)
+#define MCF_INTC0_ICR27            MCF_REG08(0xFC04805B)
+#define MCF_INTC0_ICR28            MCF_REG08(0xFC04805C)
+#define MCF_INTC0_ICR29            MCF_REG08(0xFC04805D)
+#define MCF_INTC0_ICR30            MCF_REG08(0xFC04805E)
+#define MCF_INTC0_ICR31            MCF_REG08(0xFC04805F)
+#define MCF_INTC0_ICR32            MCF_REG08(0xFC048060)
+#define MCF_INTC0_ICR33            MCF_REG08(0xFC048061)
+#define MCF_INTC0_ICR34            MCF_REG08(0xFC048062)
+#define MCF_INTC0_ICR35            MCF_REG08(0xFC048063)
+#define MCF_INTC0_ICR36            MCF_REG08(0xFC048064)
+#define MCF_INTC0_ICR37            MCF_REG08(0xFC048065)
+#define MCF_INTC0_ICR38            MCF_REG08(0xFC048066)
+#define MCF_INTC0_ICR39            MCF_REG08(0xFC048067)
+#define MCF_INTC0_ICR40            MCF_REG08(0xFC048068)
+#define MCF_INTC0_ICR41            MCF_REG08(0xFC048069)
+#define MCF_INTC0_ICR42            MCF_REG08(0xFC04806A)
+#define MCF_INTC0_ICR43            MCF_REG08(0xFC04806B)
+#define MCF_INTC0_ICR44            MCF_REG08(0xFC04806C)
+#define MCF_INTC0_ICR45            MCF_REG08(0xFC04806D)
+#define MCF_INTC0_ICR46            MCF_REG08(0xFC04806E)
+#define MCF_INTC0_ICR47            MCF_REG08(0xFC04806F)
+#define MCF_INTC0_ICR48            MCF_REG08(0xFC048070)
+#define MCF_INTC0_ICR49            MCF_REG08(0xFC048071)
+#define MCF_INTC0_ICR50            MCF_REG08(0xFC048072)
+#define MCF_INTC0_ICR51            MCF_REG08(0xFC048073)
+#define MCF_INTC0_ICR52            MCF_REG08(0xFC048074)
+#define MCF_INTC0_ICR53            MCF_REG08(0xFC048075)
+#define MCF_INTC0_ICR54            MCF_REG08(0xFC048076)
+#define MCF_INTC0_ICR55            MCF_REG08(0xFC048077)
+#define MCF_INTC0_ICR56            MCF_REG08(0xFC048078)
+#define MCF_INTC0_ICR57            MCF_REG08(0xFC048079)
+#define MCF_INTC0_ICR58            MCF_REG08(0xFC04807A)
+#define MCF_INTC0_ICR59            MCF_REG08(0xFC04807B)
+#define MCF_INTC0_ICR60            MCF_REG08(0xFC04807C)
+#define MCF_INTC0_ICR61            MCF_REG08(0xFC04807D)
+#define MCF_INTC0_ICR62            MCF_REG08(0xFC04807E)
+#define MCF_INTC0_ICR63            MCF_REG08(0xFC04807F)
+#define MCF_INTC0_ICR(x)           MCF_REG08(0xFC048040+((x)*0x001))
+#define MCF_INTC0_SWIACK           MCF_REG08(0xFC0480E0)
+#define MCF_INTC0_L1IACK           MCF_REG08(0xFC0480E4)
+#define MCF_INTC0_L2IACK           MCF_REG08(0xFC0480E8)
+#define MCF_INTC0_L3IACK           MCF_REG08(0xFC0480EC)
+#define MCF_INTC0_L4IACK           MCF_REG08(0xFC0480F0)
+#define MCF_INTC0_L5IACK           MCF_REG08(0xFC0480F4)
+#define MCF_INTC0_L6IACK           MCF_REG08(0xFC0480F8)
+#define MCF_INTC0_L7IACK           MCF_REG08(0xFC0480FC)
+#define MCF_INTC0_LIACK(x)         MCF_REG08(0xFC0480E4+((x)*0x004))
+#define MCF_INTC1_IPRH             MCF_REG32(0xFC04C000)
+#define MCF_INTC1_IPRL             MCF_REG32(0xFC04C004)
+#define MCF_INTC1_IMRH             MCF_REG32(0xFC04C008)
+#define MCF_INTC1_IMRL             MCF_REG32(0xFC04C00C)
+#define MCF_INTC1_INTFRCH          MCF_REG32(0xFC04C010)
+#define MCF_INTC1_INTFRCL          MCF_REG32(0xFC04C014)
+#define MCF_INTC1_ICONFIG          MCF_REG16(0xFC04C01A)
+#define MCF_INTC1_SIMR             MCF_REG08(0xFC04C01C)
+#define MCF_INTC1_CIMR             MCF_REG08(0xFC04C01D)
+#define MCF_INTC1_CLMASK           MCF_REG08(0xFC04C01E)
+#define MCF_INTC1_SLMASK           MCF_REG08(0xFC04C01F)
+#define MCF_INTC1_ICR0             MCF_REG08(0xFC04C040)
+#define MCF_INTC1_ICR1             MCF_REG08(0xFC04C041)
+#define MCF_INTC1_ICR2             MCF_REG08(0xFC04C042)
+#define MCF_INTC1_ICR3             MCF_REG08(0xFC04C043)
+#define MCF_INTC1_ICR4             MCF_REG08(0xFC04C044)
+#define MCF_INTC1_ICR5             MCF_REG08(0xFC04C045)
+#define MCF_INTC1_ICR6             MCF_REG08(0xFC04C046)
+#define MCF_INTC1_ICR7             MCF_REG08(0xFC04C047)
+#define MCF_INTC1_ICR8             MCF_REG08(0xFC04C048)
+#define MCF_INTC1_ICR9             MCF_REG08(0xFC04C049)
+#define MCF_INTC1_ICR10            MCF_REG08(0xFC04C04A)
+#define MCF_INTC1_ICR11            MCF_REG08(0xFC04C04B)
+#define MCF_INTC1_ICR12            MCF_REG08(0xFC04C04C)
+#define MCF_INTC1_ICR13            MCF_REG08(0xFC04C04D)
+#define MCF_INTC1_ICR14            MCF_REG08(0xFC04C04E)
+#define MCF_INTC1_ICR15            MCF_REG08(0xFC04C04F)
+#define MCF_INTC1_ICR16            MCF_REG08(0xFC04C050)
+#define MCF_INTC1_ICR17            MCF_REG08(0xFC04C051)
+#define MCF_INTC1_ICR18            MCF_REG08(0xFC04C052)
+#define MCF_INTC1_ICR19            MCF_REG08(0xFC04C053)
+#define MCF_INTC1_ICR20            MCF_REG08(0xFC04C054)
+#define MCF_INTC1_ICR21            MCF_REG08(0xFC04C055)
+#define MCF_INTC1_ICR22            MCF_REG08(0xFC04C056)
+#define MCF_INTC1_ICR23            MCF_REG08(0xFC04C057)
+#define MCF_INTC1_ICR24            MCF_REG08(0xFC04C058)
+#define MCF_INTC1_ICR25            MCF_REG08(0xFC04C059)
+#define MCF_INTC1_ICR26            MCF_REG08(0xFC04C05A)
+#define MCF_INTC1_ICR27            MCF_REG08(0xFC04C05B)
+#define MCF_INTC1_ICR28            MCF_REG08(0xFC04C05C)
+#define MCF_INTC1_ICR29            MCF_REG08(0xFC04C05D)
+#define MCF_INTC1_ICR30            MCF_REG08(0xFC04C05E)
+#define MCF_INTC1_ICR31            MCF_REG08(0xFC04C05F)
+#define MCF_INTC1_ICR32            MCF_REG08(0xFC04C060)
+#define MCF_INTC1_ICR33            MCF_REG08(0xFC04C061)
+#define MCF_INTC1_ICR34            MCF_REG08(0xFC04C062)
+#define MCF_INTC1_ICR35            MCF_REG08(0xFC04C063)
+#define MCF_INTC1_ICR36            MCF_REG08(0xFC04C064)
+#define MCF_INTC1_ICR37            MCF_REG08(0xFC04C065)
+#define MCF_INTC1_ICR38            MCF_REG08(0xFC04C066)
+#define MCF_INTC1_ICR39            MCF_REG08(0xFC04C067)
+#define MCF_INTC1_ICR40            MCF_REG08(0xFC04C068)
+#define MCF_INTC1_ICR41            MCF_REG08(0xFC04C069)
+#define MCF_INTC1_ICR42            MCF_REG08(0xFC04C06A)
+#define MCF_INTC1_ICR43            MCF_REG08(0xFC04C06B)
+#define MCF_INTC1_ICR44            MCF_REG08(0xFC04C06C)
+#define MCF_INTC1_ICR45            MCF_REG08(0xFC04C06D)
+#define MCF_INTC1_ICR46            MCF_REG08(0xFC04C06E)
+#define MCF_INTC1_ICR47            MCF_REG08(0xFC04C06F)
+#define MCF_INTC1_ICR48            MCF_REG08(0xFC04C070)
+#define MCF_INTC1_ICR49            MCF_REG08(0xFC04C071)
+#define MCF_INTC1_ICR50            MCF_REG08(0xFC04C072)
+#define MCF_INTC1_ICR51            MCF_REG08(0xFC04C073)
+#define MCF_INTC1_ICR52            MCF_REG08(0xFC04C074)
+#define MCF_INTC1_ICR53            MCF_REG08(0xFC04C075)
+#define MCF_INTC1_ICR54            MCF_REG08(0xFC04C076)
+#define MCF_INTC1_ICR55            MCF_REG08(0xFC04C077)
+#define MCF_INTC1_ICR56            MCF_REG08(0xFC04C078)
+#define MCF_INTC1_ICR57            MCF_REG08(0xFC04C079)
+#define MCF_INTC1_ICR58            MCF_REG08(0xFC04C07A)
+#define MCF_INTC1_ICR59            MCF_REG08(0xFC04C07B)
+#define MCF_INTC1_ICR60            MCF_REG08(0xFC04C07C)
+#define MCF_INTC1_ICR61            MCF_REG08(0xFC04C07D)
+#define MCF_INTC1_ICR62            MCF_REG08(0xFC04C07E)
+#define MCF_INTC1_ICR63            MCF_REG08(0xFC04C07F)
+#define MCF_INTC1_ICR(x)           MCF_REG08(0xFC04C040+((x)*0x001))
+#define MCF_INTC1_SWIACK           MCF_REG08(0xFC04C0E0)
+#define MCF_INTC1_L1IACK           MCF_REG08(0xFC04C0E4)
+#define MCF_INTC1_L2IACK           MCF_REG08(0xFC04C0E8)
+#define MCF_INTC1_L3IACK           MCF_REG08(0xFC04C0EC)
+#define MCF_INTC1_L4IACK           MCF_REG08(0xFC04C0F0)
+#define MCF_INTC1_L5IACK           MCF_REG08(0xFC04C0F4)
+#define MCF_INTC1_L6IACK           MCF_REG08(0xFC04C0F8)
+#define MCF_INTC1_L7IACK           MCF_REG08(0xFC04C0FC)
+#define MCF_INTC1_LIACK(x)         MCF_REG08(0xFC04C0E4+((x)*0x004))
+#define MCF_INTC_IPRH(x)           MCF_REG32(0xFC048000+((x)*0x4000))
+#define MCF_INTC_IPRL(x)           MCF_REG32(0xFC048004+((x)*0x4000))
+#define MCF_INTC_IMRH(x)           MCF_REG32(0xFC048008+((x)*0x4000))
+#define MCF_INTC_IMRL(x)           MCF_REG32(0xFC04800C+((x)*0x4000))
+#define MCF_INTC_INTFRCH(x)        MCF_REG32(0xFC048010+((x)*0x4000))
+#define MCF_INTC_INTFRCL(x)        MCF_REG32(0xFC048014+((x)*0x4000))
+#define MCF_INTC_ICONFIG(x)        MCF_REG16(0xFC04801A+((x)*0x4000))
+#define MCF_INTC_SIMR(x)           MCF_REG08(0xFC04801C+((x)*0x4000))
+#define MCF_INTC_CIMR(x)           MCF_REG08(0xFC04801D+((x)*0x4000))
+#define MCF_INTC_CLMASK(x)         MCF_REG08(0xFC04801E+((x)*0x4000))
+#define MCF_INTC_SLMASK(x)         MCF_REG08(0xFC04801F+((x)*0x4000))
+#define MCF_INTC_ICR0(x)           MCF_REG08(0xFC048040+((x)*0x4000))
+#define MCF_INTC_ICR1(x)           MCF_REG08(0xFC048041+((x)*0x4000))
+#define MCF_INTC_ICR2(x)           MCF_REG08(0xFC048042+((x)*0x4000))
+#define MCF_INTC_ICR3(x)           MCF_REG08(0xFC048043+((x)*0x4000))
+#define MCF_INTC_ICR4(x)           MCF_REG08(0xFC048044+((x)*0x4000))
+#define MCF_INTC_ICR5(x)           MCF_REG08(0xFC048045+((x)*0x4000))
+#define MCF_INTC_ICR6(x)           MCF_REG08(0xFC048046+((x)*0x4000))
+#define MCF_INTC_ICR7(x)           MCF_REG08(0xFC048047+((x)*0x4000))
+#define MCF_INTC_ICR8(x)           MCF_REG08(0xFC048048+((x)*0x4000))
+#define MCF_INTC_ICR9(x)           MCF_REG08(0xFC048049+((x)*0x4000))
+#define MCF_INTC_ICR10(x)          MCF_REG08(0xFC04804A+((x)*0x4000))
+#define MCF_INTC_ICR11(x)          MCF_REG08(0xFC04804B+((x)*0x4000))
+#define MCF_INTC_ICR12(x)          MCF_REG08(0xFC04804C+((x)*0x4000))
+#define MCF_INTC_ICR13(x)          MCF_REG08(0xFC04804D+((x)*0x4000))
+#define MCF_INTC_ICR14(x)          MCF_REG08(0xFC04804E+((x)*0x4000))
+#define MCF_INTC_ICR15(x)          MCF_REG08(0xFC04804F+((x)*0x4000))
+#define MCF_INTC_ICR16(x)          MCF_REG08(0xFC048050+((x)*0x4000))
+#define MCF_INTC_ICR17(x)          MCF_REG08(0xFC048051+((x)*0x4000))
+#define MCF_INTC_ICR18(x)          MCF_REG08(0xFC048052+((x)*0x4000))
+#define MCF_INTC_ICR19(x)          MCF_REG08(0xFC048053+((x)*0x4000))
+#define MCF_INTC_ICR20(x)          MCF_REG08(0xFC048054+((x)*0x4000))
+#define MCF_INTC_ICR21(x)          MCF_REG08(0xFC048055+((x)*0x4000))
+#define MCF_INTC_ICR22(x)          MCF_REG08(0xFC048056+((x)*0x4000))
+#define MCF_INTC_ICR23(x)          MCF_REG08(0xFC048057+((x)*0x4000))
+#define MCF_INTC_ICR24(x)          MCF_REG08(0xFC048058+((x)*0x4000))
+#define MCF_INTC_ICR25(x)          MCF_REG08(0xFC048059+((x)*0x4000))
+#define MCF_INTC_ICR26(x)          MCF_REG08(0xFC04805A+((x)*0x4000))
+#define MCF_INTC_ICR27(x)          MCF_REG08(0xFC04805B+((x)*0x4000))
+#define MCF_INTC_ICR28(x)          MCF_REG08(0xFC04805C+((x)*0x4000))
+#define MCF_INTC_ICR29(x)          MCF_REG08(0xFC04805D+((x)*0x4000))
+#define MCF_INTC_ICR30(x)          MCF_REG08(0xFC04805E+((x)*0x4000))
+#define MCF_INTC_ICR31(x)          MCF_REG08(0xFC04805F+((x)*0x4000))
+#define MCF_INTC_ICR32(x)          MCF_REG08(0xFC048060+((x)*0x4000))
+#define MCF_INTC_ICR33(x)          MCF_REG08(0xFC048061+((x)*0x4000))
+#define MCF_INTC_ICR34(x)          MCF_REG08(0xFC048062+((x)*0x4000))
+#define MCF_INTC_ICR35(x)          MCF_REG08(0xFC048063+((x)*0x4000))
+#define MCF_INTC_ICR36(x)          MCF_REG08(0xFC048064+((x)*0x4000))
+#define MCF_INTC_ICR37(x)          MCF_REG08(0xFC048065+((x)*0x4000))
+#define MCF_INTC_ICR38(x)          MCF_REG08(0xFC048066+((x)*0x4000))
+#define MCF_INTC_ICR39(x)          MCF_REG08(0xFC048067+((x)*0x4000))
+#define MCF_INTC_ICR40(x)          MCF_REG08(0xFC048068+((x)*0x4000))
+#define MCF_INTC_ICR41(x)          MCF_REG08(0xFC048069+((x)*0x4000))
+#define MCF_INTC_ICR42(x)          MCF_REG08(0xFC04806A+((x)*0x4000))
+#define MCF_INTC_ICR43(x)          MCF_REG08(0xFC04806B+((x)*0x4000))
+#define MCF_INTC_ICR44(x)          MCF_REG08(0xFC04806C+((x)*0x4000))
+#define MCF_INTC_ICR45(x)          MCF_REG08(0xFC04806D+((x)*0x4000))
+#define MCF_INTC_ICR46(x)          MCF_REG08(0xFC04806E+((x)*0x4000))
+#define MCF_INTC_ICR47(x)          MCF_REG08(0xFC04806F+((x)*0x4000))
+#define MCF_INTC_ICR48(x)          MCF_REG08(0xFC048070+((x)*0x4000))
+#define MCF_INTC_ICR49(x)          MCF_REG08(0xFC048071+((x)*0x4000))
+#define MCF_INTC_ICR50(x)          MCF_REG08(0xFC048072+((x)*0x4000))
+#define MCF_INTC_ICR51(x)          MCF_REG08(0xFC048073+((x)*0x4000))
+#define MCF_INTC_ICR52(x)          MCF_REG08(0xFC048074+((x)*0x4000))
+#define MCF_INTC_ICR53(x)          MCF_REG08(0xFC048075+((x)*0x4000))
+#define MCF_INTC_ICR54(x)          MCF_REG08(0xFC048076+((x)*0x4000))
+#define MCF_INTC_ICR55(x)          MCF_REG08(0xFC048077+((x)*0x4000))
+#define MCF_INTC_ICR56(x)          MCF_REG08(0xFC048078+((x)*0x4000))
+#define MCF_INTC_ICR57(x)          MCF_REG08(0xFC048079+((x)*0x4000))
+#define MCF_INTC_ICR58(x)          MCF_REG08(0xFC04807A+((x)*0x4000))
+#define MCF_INTC_ICR59(x)          MCF_REG08(0xFC04807B+((x)*0x4000))
+#define MCF_INTC_ICR60(x)          MCF_REG08(0xFC04807C+((x)*0x4000))
+#define MCF_INTC_ICR61(x)          MCF_REG08(0xFC04807D+((x)*0x4000))
+#define MCF_INTC_ICR62(x)          MCF_REG08(0xFC04807E+((x)*0x4000))
+#define MCF_INTC_ICR63(x)          MCF_REG08(0xFC04807F+((x)*0x4000))
+#define MCF_INTC_SWIACK(x)         MCF_REG08(0xFC0480E0+((x)*0x4000))
+#define MCF_INTC_L1IACK(x)         MCF_REG08(0xFC0480E4+((x)*0x4000))
+#define MCF_INTC_L2IACK(x)         MCF_REG08(0xFC0480E8+((x)*0x4000))
+#define MCF_INTC_L3IACK(x)         MCF_REG08(0xFC0480EC+((x)*0x4000))
+#define MCF_INTC_L4IACK(x)         MCF_REG08(0xFC0480F0+((x)*0x4000))
+#define MCF_INTC_L5IACK(x)         MCF_REG08(0xFC0480F4+((x)*0x4000))
+#define MCF_INTC_L6IACK(x)         MCF_REG08(0xFC0480F8+((x)*0x4000))
+#define MCF_INTC_L7IACK(x)         MCF_REG08(0xFC0480FC+((x)*0x4000))
+
+/* Bit definitions and macros for MCF_INTC_IPRH */
+#define MCF_INTC_IPRH_INT32        (0x00000001)
+#define MCF_INTC_IPRH_INT33        (0x00000002)
+#define MCF_INTC_IPRH_INT34        (0x00000004)
+#define MCF_INTC_IPRH_INT35        (0x00000008)
+#define MCF_INTC_IPRH_INT36        (0x00000010)
+#define MCF_INTC_IPRH_INT37        (0x00000020)
+#define MCF_INTC_IPRH_INT38        (0x00000040)
+#define MCF_INTC_IPRH_INT39        (0x00000080)
+#define MCF_INTC_IPRH_INT40        (0x00000100)
+#define MCF_INTC_IPRH_INT41        (0x00000200)
+#define MCF_INTC_IPRH_INT42        (0x00000400)
+#define MCF_INTC_IPRH_INT43        (0x00000800)
+#define MCF_INTC_IPRH_INT44        (0x00001000)
+#define MCF_INTC_IPRH_INT45        (0x00002000)
+#define MCF_INTC_IPRH_INT46        (0x00004000)
+#define MCF_INTC_IPRH_INT47        (0x00008000)
+#define MCF_INTC_IPRH_INT48        (0x00010000)
+#define MCF_INTC_IPRH_INT49        (0x00020000)
+#define MCF_INTC_IPRH_INT50        (0x00040000)
+#define MCF_INTC_IPRH_INT51        (0x00080000)
+#define MCF_INTC_IPRH_INT52        (0x00100000)
+#define MCF_INTC_IPRH_INT53        (0x00200000)
+#define MCF_INTC_IPRH_INT54        (0x00400000)
+#define MCF_INTC_IPRH_INT55        (0x00800000)
+#define MCF_INTC_IPRH_INT56        (0x01000000)
+#define MCF_INTC_IPRH_INT57        (0x02000000)
+#define MCF_INTC_IPRH_INT58        (0x04000000)
+#define MCF_INTC_IPRH_INT59        (0x08000000)
+#define MCF_INTC_IPRH_INT60        (0x10000000)
+#define MCF_INTC_IPRH_INT61        (0x20000000)
+#define MCF_INTC_IPRH_INT62        (0x40000000)
+#define MCF_INTC_IPRH_INT63        (0x80000000)
+
+/* Bit definitions and macros for MCF_INTC_IPRL */
+#define MCF_INTC_IPRL_INT0         (0x00000001)
+#define MCF_INTC_IPRL_INT1         (0x00000002)
+#define MCF_INTC_IPRL_INT2         (0x00000004)
+#define MCF_INTC_IPRL_INT3         (0x00000008)
+#define MCF_INTC_IPRL_INT4         (0x00000010)
+#define MCF_INTC_IPRL_INT5         (0x00000020)
+#define MCF_INTC_IPRL_INT6         (0x00000040)
+#define MCF_INTC_IPRL_INT7         (0x00000080)
+#define MCF_INTC_IPRL_INT8         (0x00000100)
+#define MCF_INTC_IPRL_INT9         (0x00000200)
+#define MCF_INTC_IPRL_INT10        (0x00000400)
+#define MCF_INTC_IPRL_INT11        (0x00000800)
+#define MCF_INTC_IPRL_INT12        (0x00001000)
+#define MCF_INTC_IPRL_INT13        (0x00002000)
+#define MCF_INTC_IPRL_INT14        (0x00004000)
+#define MCF_INTC_IPRL_INT15        (0x00008000)
+#define MCF_INTC_IPRL_INT16        (0x00010000)
+#define MCF_INTC_IPRL_INT17        (0x00020000)
+#define MCF_INTC_IPRL_INT18        (0x00040000)
+#define MCF_INTC_IPRL_INT19        (0x00080000)
+#define MCF_INTC_IPRL_INT20        (0x00100000)
+#define MCF_INTC_IPRL_INT21        (0x00200000)
+#define MCF_INTC_IPRL_INT22        (0x00400000)
+#define MCF_INTC_IPRL_INT23        (0x00800000)
+#define MCF_INTC_IPRL_INT24        (0x01000000)
+#define MCF_INTC_IPRL_INT25        (0x02000000)
+#define MCF_INTC_IPRL_INT26        (0x04000000)
+#define MCF_INTC_IPRL_INT27        (0x08000000)
+#define MCF_INTC_IPRL_INT28        (0x10000000)
+#define MCF_INTC_IPRL_INT29        (0x20000000)
+#define MCF_INTC_IPRL_INT30        (0x40000000)
+#define MCF_INTC_IPRL_INT31        (0x80000000)
+
+/* Bit definitions and macros for MCF_INTC_IMRH */
+#define MCF_INTC_IMRH_INT_MASK32   (0x00000001)
+#define MCF_INTC_IMRH_INT_MASK33   (0x00000002)
+#define MCF_INTC_IMRH_INT_MASK34   (0x00000004)
+#define MCF_INTC_IMRH_INT_MASK35   (0x00000008)
+#define MCF_INTC_IMRH_INT_MASK36   (0x00000010)
+#define MCF_INTC_IMRH_INT_MASK37   (0x00000020)
+#define MCF_INTC_IMRH_INT_MASK38   (0x00000040)
+#define MCF_INTC_IMRH_INT_MASK39   (0x00000080)
+#define MCF_INTC_IMRH_INT_MASK40   (0x00000100)
+#define MCF_INTC_IMRH_INT_MASK41   (0x00000200)
+#define MCF_INTC_IMRH_INT_MASK42   (0x00000400)
+#define MCF_INTC_IMRH_INT_MASK43   (0x00000800)
+#define MCF_INTC_IMRH_INT_MASK44   (0x00001000)
+#define MCF_INTC_IMRH_INT_MASK45   (0x00002000)
+#define MCF_INTC_IMRH_INT_MASK46   (0x00004000)
+#define MCF_INTC_IMRH_INT_MASK47   (0x00008000)
+#define MCF_INTC_IMRH_INT_MASK48   (0x00010000)
+#define MCF_INTC_IMRH_INT_MASK49   (0x00020000)
+#define MCF_INTC_IMRH_INT_MASK50   (0x00040000)
+#define MCF_INTC_IMRH_INT_MASK51   (0x00080000)
+#define MCF_INTC_IMRH_INT_MASK52   (0x00100000)
+#define MCF_INTC_IMRH_INT_MASK53   (0x00200000)
+#define MCF_INTC_IMRH_INT_MASK54   (0x00400000)
+#define MCF_INTC_IMRH_INT_MASK55   (0x00800000)
+#define MCF_INTC_IMRH_INT_MASK56   (0x01000000)
+#define MCF_INTC_IMRH_INT_MASK57   (0x02000000)
+#define MCF_INTC_IMRH_INT_MASK58   (0x04000000)
+#define MCF_INTC_IMRH_INT_MASK59   (0x08000000)
+#define MCF_INTC_IMRH_INT_MASK60   (0x10000000)
+#define MCF_INTC_IMRH_INT_MASK61   (0x20000000)
+#define MCF_INTC_IMRH_INT_MASK62   (0x40000000)
+#define MCF_INTC_IMRH_INT_MASK63   (0x80000000)
+
+/* Bit definitions and macros for MCF_INTC_IMRL */
+#define MCF_INTC_IMRL_INT_MASK0    (0x00000001)
+#define MCF_INTC_IMRL_INT_MASK1    (0x00000002)
+#define MCF_INTC_IMRL_INT_MASK2    (0x00000004)
+#define MCF_INTC_IMRL_INT_MASK3    (0x00000008)
+#define MCF_INTC_IMRL_INT_MASK4    (0x00000010)
+#define MCF_INTC_IMRL_INT_MASK5    (0x00000020)
+#define MCF_INTC_IMRL_INT_MASK6    (0x00000040)
+#define MCF_INTC_IMRL_INT_MASK7    (0x00000080)
+#define MCF_INTC_IMRL_INT_MASK8    (0x00000100)
+#define MCF_INTC_IMRL_INT_MASK9    (0x00000200)
+#define MCF_INTC_IMRL_INT_MASK10   (0x00000400)
+#define MCF_INTC_IMRL_INT_MASK11   (0x00000800)
+#define MCF_INTC_IMRL_INT_MASK12   (0x00001000)
+#define MCF_INTC_IMRL_INT_MASK13   (0x00002000)
+#define MCF_INTC_IMRL_INT_MASK14   (0x00004000)
+#define MCF_INTC_IMRL_INT_MASK15   (0x00008000)
+#define MCF_INTC_IMRL_INT_MASK16   (0x00010000)
+#define MCF_INTC_IMRL_INT_MASK17   (0x00020000)
+#define MCF_INTC_IMRL_INT_MASK18   (0x00040000)
+#define MCF_INTC_IMRL_INT_MASK19   (0x00080000)
+#define MCF_INTC_IMRL_INT_MASK20   (0x00100000)
+#define MCF_INTC_IMRL_INT_MASK21   (0x00200000)
+#define MCF_INTC_IMRL_INT_MASK22   (0x00400000)
+#define MCF_INTC_IMRL_INT_MASK23   (0x00800000)
+#define MCF_INTC_IMRL_INT_MASK24   (0x01000000)
+#define MCF_INTC_IMRL_INT_MASK25   (0x02000000)
+#define MCF_INTC_IMRL_INT_MASK26   (0x04000000)
+#define MCF_INTC_IMRL_INT_MASK27   (0x08000000)
+#define MCF_INTC_IMRL_INT_MASK28   (0x10000000)
+#define MCF_INTC_IMRL_INT_MASK29   (0x20000000)
+#define MCF_INTC_IMRL_INT_MASK30   (0x40000000)
+#define MCF_INTC_IMRL_INT_MASK31   (0x80000000)
+
+/* Bit definitions and macros for MCF_INTC_INTFRCH */
+#define MCF_INTC_INTFRCH_INTFRC32  (0x00000001)
+#define MCF_INTC_INTFRCH_INTFRC33  (0x00000002)
+#define MCF_INTC_INTFRCH_INTFRC34  (0x00000004)
+#define MCF_INTC_INTFRCH_INTFRC35  (0x00000008)
+#define MCF_INTC_INTFRCH_INTFRC36  (0x00000010)
+#define MCF_INTC_INTFRCH_INTFRC37  (0x00000020)
+#define MCF_INTC_INTFRCH_INTFRC38  (0x00000040)
+#define MCF_INTC_INTFRCH_INTFRC39  (0x00000080)
+#define MCF_INTC_INTFRCH_INTFRC40  (0x00000100)
+#define MCF_INTC_INTFRCH_INTFRC41  (0x00000200)
+#define MCF_INTC_INTFRCH_INTFRC42  (0x00000400)
+#define MCF_INTC_INTFRCH_INTFRC43  (0x00000800)
+#define MCF_INTC_INTFRCH_INTFRC44  (0x00001000)
+#define MCF_INTC_INTFRCH_INTFRC45  (0x00002000)
+#define MCF_INTC_INTFRCH_INTFRC46  (0x00004000)
+#define MCF_INTC_INTFRCH_INTFRC47  (0x00008000)
+#define MCF_INTC_INTFRCH_INTFRC48  (0x00010000)
+#define MCF_INTC_INTFRCH_INTFRC49  (0x00020000)
+#define MCF_INTC_INTFRCH_INTFRC50  (0x00040000)
+#define MCF_INTC_INTFRCH_INTFRC51  (0x00080000)
+#define MCF_INTC_INTFRCH_INTFRC52  (0x00100000)
+#define MCF_INTC_INTFRCH_INTFRC53  (0x00200000)
+#define MCF_INTC_INTFRCH_INTFRC54  (0x00400000)
+#define MCF_INTC_INTFRCH_INTFRC55  (0x00800000)
+#define MCF_INTC_INTFRCH_INTFRC56  (0x01000000)
+#define MCF_INTC_INTFRCH_INTFRC57  (0x02000000)
+#define MCF_INTC_INTFRCH_INTFRC58  (0x04000000)
+#define MCF_INTC_INTFRCH_INTFRC59  (0x08000000)
+#define MCF_INTC_INTFRCH_INTFRC60  (0x10000000)
+#define MCF_INTC_INTFRCH_INTFRC61  (0x20000000)
+#define MCF_INTC_INTFRCH_INTFRC62  (0x40000000)
+#define MCF_INTC_INTFRCH_INTFRC63  (0x80000000)
+
+/* Bit definitions and macros for MCF_INTC_INTFRCL */
+#define MCF_INTC_INTFRCL_INTFRC0   (0x00000001)
+#define MCF_INTC_INTFRCL_INTFRC1   (0x00000002)
+#define MCF_INTC_INTFRCL_INTFRC2   (0x00000004)
+#define MCF_INTC_INTFRCL_INTFRC3   (0x00000008)
+#define MCF_INTC_INTFRCL_INTFRC4   (0x00000010)
+#define MCF_INTC_INTFRCL_INTFRC5   (0x00000020)
+#define MCF_INTC_INTFRCL_INTFRC6   (0x00000040)
+#define MCF_INTC_INTFRCL_INTFRC7   (0x00000080)
+#define MCF_INTC_INTFRCL_INTFRC8   (0x00000100)
+#define MCF_INTC_INTFRCL_INTFRC9   (0x00000200)
+#define MCF_INTC_INTFRCL_INTFRC10  (0x00000400)
+#define MCF_INTC_INTFRCL_INTFRC11  (0x00000800)
+#define MCF_INTC_INTFRCL_INTFRC12  (0x00001000)
+#define MCF_INTC_INTFRCL_INTFRC13  (0x00002000)
+#define MCF_INTC_INTFRCL_INTFRC14  (0x00004000)
+#define MCF_INTC_INTFRCL_INTFRC15  (0x00008000)
+#define MCF_INTC_INTFRCL_INTFRC16  (0x00010000)
+#define MCF_INTC_INTFRCL_INTFRC17  (0x00020000)
+#define MCF_INTC_INTFRCL_INTFRC18  (0x00040000)
+#define MCF_INTC_INTFRCL_INTFRC19  (0x00080000)
+#define MCF_INTC_INTFRCL_INTFRC20  (0x00100000)
+#define MCF_INTC_INTFRCL_INTFRC21  (0x00200000)
+#define MCF_INTC_INTFRCL_INTFRC22  (0x00400000)
+#define MCF_INTC_INTFRCL_INTFRC23  (0x00800000)
+#define MCF_INTC_INTFRCL_INTFRC24  (0x01000000)
+#define MCF_INTC_INTFRCL_INTFRC25  (0x02000000)
+#define MCF_INTC_INTFRCL_INTFRC26  (0x04000000)
+#define MCF_INTC_INTFRCL_INTFRC27  (0x08000000)
+#define MCF_INTC_INTFRCL_INTFRC28  (0x10000000)
+#define MCF_INTC_INTFRCL_INTFRC29  (0x20000000)
+#define MCF_INTC_INTFRCL_INTFRC30  (0x40000000)
+#define MCF_INTC_INTFRCL_INTFRC31  (0x80000000)
+
+/* Bit definitions and macros for MCF_INTC_ICONFIG */
+#define MCF_INTC_ICONFIG_EMASK     (0x0020)
+#define MCF_INTC_ICONFIG_ELVLPRI1  (0x0200)
+#define MCF_INTC_ICONFIG_ELVLPRI2  (0x0400)
+#define MCF_INTC_ICONFIG_ELVLPRI3  (0x0800)
+#define MCF_INTC_ICONFIG_ELVLPRI4  (0x1000)
+#define MCF_INTC_ICONFIG_ELVLPRI5  (0x2000)
+#define MCF_INTC_ICONFIG_ELVLPRI6  (0x4000)
+#define MCF_INTC_ICONFIG_ELVLPRI7  (0x8000)
+
+/* Bit definitions and macros for MCF_INTC_SIMR */
+#define MCF_INTC_SIMR_SIMR(x)      (((x)&0x7F)<<0)
+
+/* Bit definitions and macros for MCF_INTC_CIMR */
+#define MCF_INTC_CIMR_CIMR(x)      (((x)&0x7F)<<0)
+
+/* Bit definitions and macros for MCF_INTC_CLMASK */
+#define MCF_INTC_CLMASK_CLMASK(x)  (((x)&0x0F)<<0)
+
+/* Bit definitions and macros for MCF_INTC_SLMASK */
+#define MCF_INTC_SLMASK_SLMASK(x)  (((x)&0x0F)<<0)
+
+/* Bit definitions and macros for MCF_INTC_ICR */
+#define MCF_INTC_ICR_IL(x)         (((x)&0x07)<<0)
+
+/* Bit definitions and macros for MCF_INTC_SWIACK */
+#define MCF_INTC_SWIACK_VECTOR(x)  (((x)&0xFF)<<0)
+
+/* Bit definitions and macros for MCF_INTC_LIACK */
+#define MCF_INTC_LIACK_VECTOR(x)   (((x)&0xFF)<<0)
+
+/********************************************************************/
+/*********************************************************************
+*
+* LCD Controller (LCDC)
+*
+*********************************************************************/
+
+/* Register read/write macros */
+#define MCF_LCDC_LSSAR                  MCF_REG32(0xFC0AC000)
+#define MCF_LCDC_LSR                    MCF_REG32(0xFC0AC004)
+#define MCF_LCDC_LVPWR                  MCF_REG32(0xFC0AC008)
+#define MCF_LCDC_LCPR                   MCF_REG32(0xFC0AC00C)
+#define MCF_LCDC_LCWHBR                 MCF_REG32(0xFC0AC010)
+#define MCF_LCDC_LCCMR                  MCF_REG32(0xFC0AC014)
+#define MCF_LCDC_LPCR                   MCF_REG32(0xFC0AC018)
+#define MCF_LCDC_LHCR                   MCF_REG32(0xFC0AC01C)
+#define MCF_LCDC_LVCR                   MCF_REG32(0xFC0AC020)
+#define MCF_LCDC_LPOR                   MCF_REG32(0xFC0AC024)
+#define MCF_LCDC_LSCR                   MCF_REG32(0xFC0AC028)
+#define MCF_LCDC_LPCCR                  MCF_REG32(0xFC0AC02C)
+#define MCF_LCDC_LDCR                   MCF_REG32(0xFC0AC030)
+#define MCF_LCDC_LRMCR                  MCF_REG32(0xFC0AC034)
+#define MCF_LCDC_LICR                   MCF_REG32(0xFC0AC038)
+#define MCF_LCDC_LIER                   MCF_REG32(0xFC0AC03C)
+#define MCF_LCDC_LISR                   MCF_REG32(0xFC0AC040)
+#define MCF_LCDC_LGWSAR                 MCF_REG32(0xFC0AC050)
+#define MCF_LCDC_LGWSR                  MCF_REG32(0xFC0AC054)
+#define MCF_LCDC_LGWVPWR                MCF_REG32(0xFC0AC058)
+#define MCF_LCDC_LGWPOR                 MCF_REG32(0xFC0AC05C)
+#define MCF_LCDC_LGWPR                  MCF_REG32(0xFC0AC060)
+#define MCF_LCDC_LGWCR                  MCF_REG32(0xFC0AC064)
+#define MCF_LCDC_LGWDCR                 MCF_REG32(0xFC0AC068)
+#define MCF_LCDC_BPLUT_BASE             MCF_REG32(0xFC0AC800)
+#define MCF_LCDC_GWLUT_BASE             MCF_REG32(0xFC0ACC00)
+
+/* Bit definitions and macros for MCF_LCDC_LSSAR */
+#define MCF_LCDC_LSSAR_SSA(x)           (((x)&0x3FFFFFFF)<<2)
+
+/* Bit definitions and macros for MCF_LCDC_LSR */
+#define MCF_LCDC_LSR_YMAX(x)            (((x)&0x000003FF)<<0)
+#define MCF_LCDC_LSR_XMAX(x)            (((x)&0x0000003F)<<20)
+
+/* Bit definitions and macros for MCF_LCDC_LVPWR */
+#define MCF_LCDC_LVPWR_VPW(x)           (((x)&0x000003FF)<<0)
+
+/* Bit definitions and macros for MCF_LCDC_LCPR */
+#define MCF_LCDC_LCPR_CYP(x)            (((x)&0x000003FF)<<0)
+#define MCF_LCDC_LCPR_CXP(x)            (((x)&0x000003FF)<<16)
+#define MCF_LCDC_LCPR_OP                (0x10000000)
+#define MCF_LCDC_LCPR_CC(x)             (((x)&0x00000003)<<30)
+#define MCF_LCDC_LCPR_CC_TRANSPARENT    (0x00000000)
+#define MCF_LCDC_LCPR_CC_OR             (0x40000000)
+#define MCF_LCDC_LCPR_CC_XOR            (0x80000000)
+#define MCF_LCDC_LCPR_CC_AND            (0xC0000000)
+#define MCF_LCDC_LCPR_OP_ON             (0x10000000)
+#define MCF_LCDC_LCPR_OP_OFF            (0x00000000)
+
+/* Bit definitions and macros for MCF_LCDC_LCWHBR */
+#define MCF_LCDC_LCWHBR_BD(x)           (((x)&0x000000FF)<<0)
+#define MCF_LCDC_LCWHBR_CH(x)           (((x)&0x0000001F)<<16)
+#define MCF_LCDC_LCWHBR_CW(x)           (((x)&0x0000001F)<<24)
+#define MCF_LCDC_LCWHBR_BK_EN           (0x80000000)
+#define MCF_LCDC_LCWHBR_BK_EN_ON        (0x80000000)
+#define MCF_LCDC_LCWHBR_BK_EN_OFF       (0x00000000)
+
+/* Bit definitions and macros for MCF_LCDC_LCCMR */
+#define MCF_LCDC_LCCMR_CUR_COL_B(x)     (((x)&0x0000003F)<<0)
+#define MCF_LCDC_LCCMR_CUR_COL_G(x)     (((x)&0x0000003F)<<6)
+#define MCF_LCDC_LCCMR_CUR_COL_R(x)     (((x)&0x0000003F)<<12)
+
+/* Bit definitions and macros for MCF_LCDC_LPCR */
+#define MCF_LCDC_LPCR_PCD(x)            (((x)&0x0000003F)<<0)
+#define MCF_LCDC_LPCR_SHARP             (0x00000040)
+#define MCF_LCDC_LPCR_SCLKSEL           (0x00000080)
+#define MCF_LCDC_LPCR_ACD(x)            (((x)&0x0000007F)<<8)
+#define MCF_LCDC_LPCR_ACDSEL            (0x00008000)
+#define MCF_LCDC_LPCR_REV_VS            (0x00010000)
+#define MCF_LCDC_LPCR_SWAP_SEL          (0x00020000)
+#define MCF_LCDC_LPCR_ENDSEL            (0x00040000)
+#define MCF_LCDC_LPCR_SCLKIDLE          (0x00080000)
+#define MCF_LCDC_LPCR_OEPOL             (0x00100000)
+#define MCF_LCDC_LPCR_CLKPOL            (0x00200000)
+#define MCF_LCDC_LPCR_LPPOL             (0x00400000)
+#define MCF_LCDC_LPCR_FLM               (0x00800000)
+#define MCF_LCDC_LPCR_PIXPOL            (0x01000000)
+#define MCF_LCDC_LPCR_BPIX(x)           (((x)&0x00000007)<<25)
+#define MCF_LCDC_LPCR_PBSIZ(x)          (((x)&0x00000003)<<28)
+#define MCF_LCDC_LPCR_COLOR             (0x40000000)
+#define MCF_LCDC_LPCR_TFT               (0x80000000)
+#define MCF_LCDC_LPCR_MODE_MONOCGROME   (0x00000000)
+#define MCF_LCDC_LPCR_MODE_CSTN         (0x40000000)
+#define MCF_LCDC_LPCR_MODE_TFT          (0xC0000000)
+#define MCF_LCDC_LPCR_PBSIZ_1           (0x00000000)
+#define MCF_LCDC_LPCR_PBSIZ_2           (0x10000000)
+#define MCF_LCDC_LPCR_PBSIZ_4           (0x20000000)
+#define MCF_LCDC_LPCR_PBSIZ_8           (0x30000000)
+#define MCF_LCDC_LPCR_BPIX_1bpp         (0x00000000)
+#define MCF_LCDC_LPCR_BPIX_2bpp         (0x02000000)
+#define MCF_LCDC_LPCR_BPIX_4bpp         (0x04000000)
+#define MCF_LCDC_LPCR_BPIX_8bpp         (0x06000000)
+#define MCF_LCDC_LPCR_BPIX_12bpp        (0x08000000)
+#define MCF_LCDC_LPCR_BPIX_16bpp        (0x0A000000)
+#define MCF_LCDC_LPCR_BPIX_18bpp        (0x0C000000)
+
+#define MCF_LCDC_LPCR_PANEL_TYPE(x)     (((x)&0x00000003)<<30) 
+
+/* Bit definitions and macros for MCF_LCDC_LHCR */
+#define MCF_LCDC_LHCR_H_WAIT_2(x)       (((x)&0x000000FF)<<0)
+#define MCF_LCDC_LHCR_H_WAIT_1(x)       (((x)&0x000000FF)<<8)
+#define MCF_LCDC_LHCR_H_WIDTH(x)        (((x)&0x0000003F)<<26)
+
+/* Bit definitions and macros for MCF_LCDC_LVCR */
+#define MCF_LCDC_LVCR_V_WAIT_2(x)       (((x)&0x000000FF)<<0)
+#define MCF_LCDC_LVCR_V_WAIT_1(x)       (((x)&0x000000FF)<<8)
+#define MCF_LCDC_LVCR_V_WIDTH(x)      (((x)&0x0000003F)<<26)
+
+/* Bit definitions and macros for MCF_LCDC_LPOR */
+#define MCF_LCDC_LPOR_POS(x)            (((x)&0x0000001F)<<0)
+
+/* Bit definitions and macros for MCF_LCDC_LPCCR */
+#define MCF_LCDC_LPCCR_PW(x)            (((x)&0x000000FF)<<0)
+#define MCF_LCDC_LPCCR_CC_EN            (0x00000100)
+#define MCF_LCDC_LPCCR_SCR(x)           (((x)&0x00000003)<<9)
+#define MCF_LCDC_LPCCR_LDMSK            (0x00008000)
+#define MCF_LCDC_LPCCR_CLS_HI_WIDTH(x)  (((x)&0x000001FF)<<16)
+#define MCF_LCDC_LPCCR_SCR_LINEPULSE    (0x00000000)
+#define MCF_LCDC_LPCCR_SCR_PIXELCLK     (0x00002000)
+#define MCF_LCDC_LPCCR_SCR_LCDCLOCK     (0x00004000)
+
+/* Bit definitions and macros for MCF_LCDC_LDCR */
+#define MCF_LCDC_LDCR_TM(x)             (((x)&0x0000001F)<<0)
+#define MCF_LCDC_LDCR_HM(x)             (((x)&0x0000001F)<<16)
+#define MCF_LCDC_LDCR_BURST             (0x80000000)
+
+/* Bit definitions and macros for MCF_LCDC_LRMCR */
+#define MCF_LCDC_LRMCR_SEL_REF          (0x00000001)
+
+/* Bit definitions and macros for MCF_LCDC_LICR */
+#define MCF_LCDC_LICR_INTCON            (0x00000001)
+#define MCF_LCDC_LICR_INTSYN            (0x00000004)
+#define MCF_LCDC_LICR_GW_INT_CON        (0x00000010)
+
+/* Bit definitions and macros for MCF_LCDC_LIER */
+#define MCF_LCDC_LIER_BOF_EN            (0x00000001)
+#define MCF_LCDC_LIER_EOF_EN            (0x00000002)
+#define MCF_LCDC_LIER_ERR_RES_EN        (0x00000004)
+#define MCF_LCDC_LIER_UDR_ERR_EN        (0x00000008)
+#define MCF_LCDC_LIER_GW_BOF_EN         (0x00000010)
+#define MCF_LCDC_LIER_GW_EOF_EN         (0x00000020)
+#define MCF_LCDC_LIER_GW_ERR_RES_EN     (0x00000040)
+#define MCF_LCDC_LIER_GW_UDR_ERR_EN     (0x00000080)
+
+/* Bit definitions and macros for MCF_LCDC_LISR */
+#define MCF_LCDC_LISR_BOF               (0x00000001)
+#define MCF_LCDC_LISR_EOF               (0x00000002)
+#define MCF_LCDC_LISR_ERR_RES           (0x00000004)
+#define MCF_LCDC_LISR_UDR_ERR           (0x00000008)
+#define MCF_LCDC_LISR_GW_BOF            (0x00000010)
+#define MCF_LCDC_LISR_GW_EOF            (0x00000020)
+#define MCF_LCDC_LISR_GW_ERR_RES        (0x00000040)
+#define MCF_LCDC_LISR_GW_UDR_ERR        (0x00000080)
+
+/* Bit definitions and macros for MCF_LCDC_LGWSAR */
+#define MCF_LCDC_LGWSAR_GWSA(x)         (((x)&0x3FFFFFFF)<<2)
+
+/* Bit definitions and macros for MCF_LCDC_LGWSR */
+#define MCF_LCDC_LGWSR_GWH(x)           (((x)&0x000003FF)<<0)
+#define MCF_LCDC_LGWSR_GWW(x)           (((x)&0x0000003F)<<20)
+
+/* Bit definitions and macros for MCF_LCDC_LGWVPWR */
+#define MCF_LCDC_LGWVPWR_GWVPW(x)       (((x)&0x000003FF)<<0)
+
+/* Bit definitions and macros for MCF_LCDC_LGWPOR */
+#define MCF_LCDC_LGWPOR_GWPO(x)         (((x)&0x0000001F)<<0)
+
+/* Bit definitions and macros for MCF_LCDC_LGWPR */
+#define MCF_LCDC_LGWPR_GWYP(x)          (((x)&0x000003FF)<<0)
+#define MCF_LCDC_LGWPR_GWXP(x)          (((x)&0x000003FF)<<16)
+
+/* Bit definitions and macros for MCF_LCDC_LGWCR */
+#define MCF_LCDC_LGWCR_GWCKB(x)         (((x)&0x0000003F)<<0)
+#define MCF_LCDC_LGWCR_GWCKG(x)         (((x)&0x0000003F)<<6)
+#define MCF_LCDC_LGWCR_GWCKR(x)         (((x)&0x0000003F)<<12)
+#define MCF_LCDC_LGWCR_GW_RVS           (0x00200000)
+#define MCF_LCDC_LGWCR_GWE              (0x00400000)
+#define MCF_LCDC_LGWCR_GWCKE            (0x00800000)
+#define MCF_LCDC_LGWCR_GWAV(x)          (((x)&0x000000FF)<<24)
+
+/* Bit definitions and macros for MCF_LCDC_LGWDCR */
+#define MCF_LCDC_LGWDCR_GWTM(x)         (((x)&0x0000001F)<<0)
+#define MCF_LCDC_LGWDCR_GWHM(x)         (((x)&0x0000001F)<<16)
+#define MCF_LCDC_LGWDCR_GWBT            (0x80000000)
+
+/* Bit definitions and macros for MCF_LCDC_LSCR */
+#define MCF_LCDC_LSCR_PS_RISE_DELAY(x)    (((x)&0x0000003F)<<26)
+#define MCF_LCDC_LSCR_CLS_RISE_DELAY(x)   (((x)&0x000000FF)<<16)
+#define MCF_LCDC_LSCR_REV_TOGGLE_DELAY(x) (((x)&0x0000000F)<<8)
+#define MCF_LCDC_LSCR_GRAY_2(x)  		  (((x)&0x0000000F)<<4)
+#define MCF_LCDC_LSCR_GRAY_1(x)  		  (((x)&0x0000000F)<<0)
+
+/* Bit definitions and macros for MCF_LCDC_BPLUT_BASE */
+#define MCF_LCDC_BPLUT_BASE_BASE(x)     (((x)&0xFFFFFFFF)<<0)
+
+/* Bit definitions and macros for MCF_LCDC_GWLUT_BASE */
+#define MCF_LCDC_GWLUT_BASE_BASE(x)     (((x)&0xFFFFFFFF)<<0)
+
+/*********************************************************************
+ *
+ * Phase Locked Loop (PLL)
+ *
+ *********************************************************************/
+
+/* Register read/write macros */
+#define MCF_PLL_PODR              MCF_REG08(0xFC0C0000)
+#define MCF_PLL_PLLCR             MCF_REG08(0xFC0C0004)
+#define MCF_PLL_PMDR              MCF_REG08(0xFC0C0008)
+#define MCF_PLL_PFDR              MCF_REG08(0xFC0C000C)
+
+/* Bit definitions and macros for MCF_PLL_PODR */
+#define MCF_PLL_PODR_BUSDIV(x)    (((x)&0x0F)<<0)
+#define MCF_PLL_PODR_CPUDIV(x)    (((x)&0x0F)<<4)
+
+/* Bit definitions and macros for MCF_PLL_PLLCR */
+#define MCF_PLL_PLLCR_DITHDEV(x)  (((x)&0x07)<<0)
+#define MCF_PLL_PLLCR_DITHEN      (0x80)
+
+/* Bit definitions and macros for MCF_PLL_PMDR */
+#define MCF_PLL_PMDR_MODDIV(x)    (((x)&0xFF)<<0)
+
+/* Bit definitions and macros for MCF_PLL_PFDR */
+#define MCF_PLL_PFDR_MFD(x)       (((x)&0xFF)<<0)
+
+/*********************************************************************
+ *
+ * System Control Module Registers (SCM)
+ *
+ *********************************************************************/
+
+/* Register read/write macros */
+#define MCF_SCM_MPR			MCF_REG32(0xFC000000)
+#define MCF_SCM_PACRA			MCF_REG32(0xFC000020)
+#define MCF_SCM_PACRB			MCF_REG32(0xFC000024)
+#define MCF_SCM_PACRC			MCF_REG32(0xFC000028)
+#define MCF_SCM_PACRD			MCF_REG32(0xFC00002C)
+#define MCF_SCM_PACRE			MCF_REG32(0xFC000040)
+#define MCF_SCM_PACRF			MCF_REG32(0xFC000044)
+
+#define MCF_SCM_BCR			MCF_REG32(0xFC040024)
+
+/*********************************************************************
+ *
+ * SDRAM Controller (SDRAMC)
+ *
+ *********************************************************************/
+
+/* Register read/write macros */
+#define MCF_SDRAMC_SDMR			MCF_REG32(0xFC0B8000)
+#define MCF_SDRAMC_SDCR			MCF_REG32(0xFC0B8004)
+#define MCF_SDRAMC_SDCFG1		MCF_REG32(0xFC0B8008)
+#define MCF_SDRAMC_SDCFG2		MCF_REG32(0xFC0B800C)
+#define MCF_SDRAMC_LIMP_FIX		MCF_REG32(0xFC0B8080)
+#define MCF_SDRAMC_SDDS			MCF_REG32(0xFC0B8100)
+#define MCF_SDRAMC_SDCS0		MCF_REG32(0xFC0B8110)
+#define MCF_SDRAMC_SDCS1		MCF_REG32(0xFC0B8114)
+#define MCF_SDRAMC_SDCS2		MCF_REG32(0xFC0B8118)
+#define MCF_SDRAMC_SDCS3		MCF_REG32(0xFC0B811C)
+#define MCF_SDRAMC_SDCS(x)		MCF_REG32(0xFC0B8110+((x)*0x004))
+
+/* Bit definitions and macros for MCF_SDRAMC_SDMR */
+#define MCF_SDRAMC_SDMR_CMD		(0x00010000)
+#define MCF_SDRAMC_SDMR_AD(x)		(((x)&0x00000FFF)<<18)
+#define MCF_SDRAMC_SDMR_BNKAD(x)	(((x)&0x00000003)<<30)
+#define MCF_SDRAMC_SDMR_BNKAD_LMR	(0x00000000)
+#define MCF_SDRAMC_SDMR_BNKAD_LEMR	(0x40000000)
+
+/* Bit definitions and macros for MCF_SDRAMC_SDCR */
+#define MCF_SDRAMC_SDCR_IPALL		(0x00000002)
+#define MCF_SDRAMC_SDCR_IREF		(0x00000004)
+#define MCF_SDRAMC_SDCR_DQS_OE(x)	(((x)&0x0000000F)<<8)
+#define MCF_SDRAMC_SDCR_PS(x)		(((x)&0x00000003)<<12)
+#define MCF_SDRAMC_SDCR_RCNT(x)		(((x)&0x0000003F)<<16)
+#define MCF_SDRAMC_SDCR_OE_RULE		(0x00400000)
+#define MCF_SDRAMC_SDCR_MUX(x)		(((x)&0x00000003)<<24)
+#define MCF_SDRAMC_SDCR_REF		(0x10000000)
+#define MCF_SDRAMC_SDCR_DDR		(0x20000000)
+#define MCF_SDRAMC_SDCR_CKE		(0x40000000)
+#define MCF_SDRAMC_SDCR_MODE_EN		(0x80000000)
+#define MCF_SDRAMC_SDCR_PS_16		(0x00002000)
+#define MCF_SDRAMC_SDCR_PS_32		(0x00000000)
+
+/* Bit definitions and macros for MCF_SDRAMC_SDCFG1 */
+#define MCF_SDRAMC_SDCFG1_WTLAT(x)	(((x)&0x00000007)<<4)
+#define MCF_SDRAMC_SDCFG1_REF2ACT(x)	(((x)&0x0000000F)<<8)
+#define MCF_SDRAMC_SDCFG1_PRE2ACT(x)	(((x)&0x00000007)<<12)
+#define MCF_SDRAMC_SDCFG1_ACT2RW(x)	(((x)&0x00000007)<<16)
+#define MCF_SDRAMC_SDCFG1_RDLAT(x)	(((x)&0x0000000F)<<20)
+#define MCF_SDRAMC_SDCFG1_SWT2RD(x)	(((x)&0x00000007)<<24)
+#define MCF_SDRAMC_SDCFG1_SRD2RW(x)	(((x)&0x0000000F)<<28)
+
+/* Bit definitions and macros for MCF_SDRAMC_SDCFG2 */
+#define MCF_SDRAMC_SDCFG2_BL(x)		(((x)&0x0000000F)<<16)
+#define MCF_SDRAMC_SDCFG2_BRD2WT(x)	(((x)&0x0000000F)<<20)
+#define MCF_SDRAMC_SDCFG2_BWT2RW(x)	(((x)&0x0000000F)<<24)
+#define MCF_SDRAMC_SDCFG2_BRD2PRE(x)	(((x)&0x0000000F)<<28)
+
+/* Device Errata - LIMP mode work around */
+#define MCF_SDRAMC_REFRESH		(0x40000000)
+
+/* Bit definitions and macros for MCF_SDRAMC_SDDS */
+#define MCF_SDRAMC_SDDS_SB_D(x)		(((x)&0x00000003)<<0)
+#define MCF_SDRAMC_SDDS_SB_S(x)		(((x)&0x00000003)<<2)
+#define MCF_SDRAMC_SDDS_SB_A(x)		(((x)&0x00000003)<<4)
+#define MCF_SDRAMC_SDDS_SB_C(x)		(((x)&0x00000003)<<6)
+#define MCF_SDRAMC_SDDS_SB_E(x)		(((x)&0x00000003)<<8)
+
+/* Bit definitions and macros for MCF_SDRAMC_SDCS */
+#define MCF_SDRAMC_SDCS_CSSZ(x)		(((x)&0x0000001F)<<0)
+#define MCF_SDRAMC_SDCS_BASE(x)		(((x)&0x00000FFF)<<20)
+#define MCF_SDRAMC_SDCS_BA(x)		((x)&0xFFF00000)
+#define MCF_SDRAMC_SDCS_CSSZ_DIABLE	(0x00000000)
+#define MCF_SDRAMC_SDCS_CSSZ_1MBYTE	(0x00000013)
+#define MCF_SDRAMC_SDCS_CSSZ_2MBYTE	(0x00000014)
+#define MCF_SDRAMC_SDCS_CSSZ_4MBYTE	(0x00000015)
+#define MCF_SDRAMC_SDCS_CSSZ_8MBYTE	(0x00000016)
+#define MCF_SDRAMC_SDCS_CSSZ_16MBYTE	(0x00000017)
+#define MCF_SDRAMC_SDCS_CSSZ_32MBYTE	(0x00000018)
+#define MCF_SDRAMC_SDCS_CSSZ_64MBYTE	(0x00000019)
+#define MCF_SDRAMC_SDCS_CSSZ_128MBYTE	(0x0000001A)
+#define MCF_SDRAMC_SDCS_CSSZ_256MBYTE	(0x0000001B)
+#define MCF_SDRAMC_SDCS_CSSZ_512MBYTE	(0x0000001C)
+#define MCF_SDRAMC_SDCS_CSSZ_1GBYTE	(0x0000001D)
+#define MCF_SDRAMC_SDCS_CSSZ_2GBYTE	(0x0000001E)
+#define MCF_SDRAMC_SDCS_CSSZ_4GBYTE	(0x0000001F)
+
+/*********************************************************************
+ *
+ *      FlexCAN module registers
+ *
+ *********************************************************************/
+#define MCF_FLEXCAN_BASEADDR(x)		(0xFC020000+(x)*0x0800)
+#define MCF_FLEXCAN_CANMCR(x)		MCF_REG32(0xFC020000+(x)*0x0800+0x00)
+#define MCF_FLEXCAN_CANCTRL(x)		MCF_REG32(0xFC020000+(x)*0x0800+0x04)
+#define MCF_FLEXCAN_TIMER(x)		MCF_REG32(0xFC020000+(x)*0x0800+0x08)
+#define MCF_FLEXCAN_RXGMASK(x)		MCF_REG32(0xFC020000+(x)*0x0800+0x10)
+#define MCF_FLEXCAN_RX14MASK(x)		MCF_REG32(0xFC020000+(x)*0x0800+0x14)
+#define MCF_FLEXCAN_RX15MASK(x)		MCF_REG32(0xFC020000+(x)*0x0800+0x18)
+#define MCF_FLEXCAN_ERRCNT(x)		MCF_REG32(0xFC020000+(x)*0x0800+0x1C)
+#define MCF_FLEXCAN_ERRSTAT(x)		MCF_REG32(0xFC020000+(x)*0x0800+0x20)
+#define MCF_FLEXCAN_IMASK(x)		MCF_REG32(0xFC020000+(x)*0x0800+0x28)
+#define MCF_FLEXCAN_IFLAG(x)		MCF_REG32(0xFC020000+(x)*0x0800+0x30)
+
+#define MCF_FLEXCAN_MB_CNT(x,y)		MCF_REG32(0xFC020080+(x)*0x0800+(y)*0x10+0x0)
+#define MCF_FLEXCAN_MB_ID(x,y)		MCF_REG32(0xFC020080+(x)*0x0800+(y)*0x10+0x4)
+#define MCF_FLEXCAN_MB_DB(x,y,z)	MCF_REG08(0xFC020080+(x)*0x0800+(y)*0x10+0x8+(z)*0x1)
+
+/*
+ *      FlexCAN Module Configuration Register
+ */
+#define CANMCR_MDIS		(0x80000000)
+#define CANMCR_FRZ		(0x40000000)
+#define CANMCR_HALT		(0x10000000)
+#define CANMCR_SOFTRST		(0x02000000)
+#define CANMCR_FRZACK		(0x01000000)
+#define CANMCR_SUPV		(0x00800000)
+#define CANMCR_MAXMB(x)         ((x)&0x0F)
+
+/*
+ *      FlexCAN Control Register
+ */
+#define CANCTRL_PRESDIV(x)      (((x)&0xFF)<<24)
+#define CANCTRL_RJW(x)          (((x)&0x03)<<22)
+#define CANCTRL_PSEG1(x)        (((x)&0x07)<<19)
+#define CANCTRL_PSEG2(x)        (((x)&0x07)<<16)
+#define CANCTRL_BOFFMSK         (0x00008000)
+#define CANCTRL_ERRMSK	        (0x00004000)
+#define CANCTRL_CLKSRC		(0x00002000)
+#define CANCTRL_LPB	        (0x00001000)
+#define CANCTRL_SAMP	        (0x00000080)
+#define CANCTRL_BOFFREC         (0x00000040)
+#define CANCTRL_TSYNC           (0x00000020)
+#define CANCTRL_LBUF            (0x00000010)
+#define CANCTRL_LOM             (0x00000008)
+#define CANCTRL_PROPSEG(x)      ((x)&0x07)
+
+/*
+ *      FlexCAN Error Counter Register
+ */
+#define ERRCNT_RXECTR(x)        (((x)&0xFF)<<8)
+#define ERRCNT_TXECTR(x)        ((x)&0xFF)
+
+/*
+ *      FlexCAN Error and Status Register
+ */
+#define ERRSTAT_BITERR(x)       (((x)&0x03)<<14)
+#define ERRSTAT_ACKERR           (0x00002000)
+#define ERRSTAT_CRCERR           (0x00001000)
+#define ERRSTAT_FRMERR           (0x00000800)
+#define ERRSTAT_STFERR           (0x00000400)
+#define ERRSTAT_TXWRN            (0x00000200)
+#define ERRSTAT_RXWRN            (0x00000100)
+#define ERRSTAT_IDLE             (0x00000080)
+#define ERRSTAT_TXRX             (0x00000040)
+#define ERRSTAT_FLTCONF(x)       (((x)&0x03)<<4)
+#define ERRSTAT_BOFFINT          (0x00000004)
+#define ERRSTAT_ERRINT           (0x00000002)
+
+/*
+ *      Interrupt Mask Register
+ */
+#define IMASK_BUF15M		(0x8000)
+#define IMASK_BUF14M		(0x4000)
+#define IMASK_BUF13M		(0x2000)
+#define IMASK_BUF12M		(0x1000)
+#define IMASK_BUF11M		(0x0800)
+#define IMASK_BUF10M		(0x0400)
+#define IMASK_BUF9M		(0x0200)
+#define IMASK_BUF8M		(0x0100)
+#define IMASK_BUF7M		(0x0080)
+#define IMASK_BUF6M		(0x0040)
+#define IMASK_BUF5M		(0x0020)
+#define IMASK_BUF4M		(0x0010)
+#define IMASK_BUF3M		(0x0008)
+#define IMASK_BUF2M		(0x0004)
+#define IMASK_BUF1M		(0x0002)
+#define IMASK_BUF0M		(0x0001)
+#define IMASK_BUFnM(x)		(0x1<<(x))
+#define IMASK_BUFF_ENABLE_ALL	(0x1111)
+#define IMASK_BUFF_DISABLE_ALL	(0x0000)
+
+/*
+ *      Interrupt Flag Register
+ */
+#define IFLAG_BUF15M		(0x8000)
+#define IFLAG_BUF14M		(0x4000)
+#define IFLAG_BUF13M		(0x2000)
+#define IFLAG_BUF12M		(0x1000)
+#define IFLAG_BUF11M		(0x0800)
+#define IFLAG_BUF10M		(0x0400)
+#define IFLAG_BUF9M		(0x0200)
+#define IFLAG_BUF8M		(0x0100)
+#define IFLAG_BUF7M		(0x0080)
+#define IFLAG_BUF6M		(0x0040)
+#define IFLAG_BUF5M		(0x0020)
+#define IFLAG_BUF4M		(0x0010)
+#define IFLAG_BUF3M		(0x0008)
+#define IFLAG_BUF2M		(0x0004)
+#define IFLAG_BUF1M		(0x0002)
+#define IFLAG_BUF0M		(0x0001)
+#define IFLAG_BUFF_SET_ALL	(0xFFFF)
+#define IFLAG_BUFF_CLEAR_ALL	(0x0000)
+#define IFLAG_BUFnM(x)		(0x1<<(x))
+
+/*
+ *      Message Buffers
+ */
+#define MB_CNT_CODE(x)		(((x)&0x0F)<<24)
+#define MB_CNT_SRR		(0x00400000)
+#define MB_CNT_IDE		(0x00200000)
+#define MB_CNT_RTR		(0x00100000)
+#define MB_CNT_LENGTH(x)	(((x)&0x0F)<<16)
+#define MB_CNT_TIMESTAMP(x)	((x)&0xFFFF)
+#define MB_ID_STD(x)		(((x)&0x07FF)<<18)
+#define MB_ID_EXT(x)		((x)&0x3FFFF)
+
+/*********************************************************************
+ *
+ * Edge Port Module (EPORT)
+ *
+ *********************************************************************/
+
+/* Register read/write macros */
+#define MCF_EPORT_EPPAR                MCF_REG16(0xFC094000)
+#define MCF_EPORT_EPDDR                MCF_REG08(0xFC094002)
+#define MCF_EPORT_EPIER                MCF_REG08(0xFC094003)
+#define MCF_EPORT_EPDR                 MCF_REG08(0xFC094004)
+#define MCF_EPORT_EPPDR                MCF_REG08(0xFC094005)
+#define MCF_EPORT_EPFR                 MCF_REG08(0xFC094006)
+
+/* Bit definitions and macros for MCF_EPORT_EPPAR */
+#define MCF_EPORT_EPPAR_EPPA1(x)       (((x)&0x0003)<<2)
+#define MCF_EPORT_EPPAR_EPPA2(x)       (((x)&0x0003)<<4)
+#define MCF_EPORT_EPPAR_EPPA3(x)       (((x)&0x0003)<<6)
+#define MCF_EPORT_EPPAR_EPPA4(x)       (((x)&0x0003)<<8)
+#define MCF_EPORT_EPPAR_EPPA5(x)       (((x)&0x0003)<<10)
+#define MCF_EPORT_EPPAR_EPPA6(x)       (((x)&0x0003)<<12)
+#define MCF_EPORT_EPPAR_EPPA7(x)       (((x)&0x0003)<<14)
+#define MCF_EPORT_EPPAR_LEVEL          (0)
+#define MCF_EPORT_EPPAR_RISING         (1)
+#define MCF_EPORT_EPPAR_FALLING        (2)
+#define MCF_EPORT_EPPAR_BOTH           (3)
+#define MCF_EPORT_EPPAR_EPPA7_LEVEL    (0x0000)
+#define MCF_EPORT_EPPAR_EPPA7_RISING   (0x4000)
+#define MCF_EPORT_EPPAR_EPPA7_FALLING  (0x8000)
+#define MCF_EPORT_EPPAR_EPPA7_BOTH     (0xC000)
+#define MCF_EPORT_EPPAR_EPPA6_LEVEL    (0x0000)
+#define MCF_EPORT_EPPAR_EPPA6_RISING   (0x1000)
+#define MCF_EPORT_EPPAR_EPPA6_FALLING  (0x2000)
+#define MCF_EPORT_EPPAR_EPPA6_BOTH     (0x3000)
+#define MCF_EPORT_EPPAR_EPPA5_LEVEL    (0x0000)
+#define MCF_EPORT_EPPAR_EPPA5_RISING   (0x0400)
+#define MCF_EPORT_EPPAR_EPPA5_FALLING  (0x0800)
+#define MCF_EPORT_EPPAR_EPPA5_BOTH     (0x0C00)
+#define MCF_EPORT_EPPAR_EPPA4_LEVEL    (0x0000)
+#define MCF_EPORT_EPPAR_EPPA4_RISING   (0x0100)
+#define MCF_EPORT_EPPAR_EPPA4_FALLING  (0x0200)
+#define MCF_EPORT_EPPAR_EPPA4_BOTH     (0x0300)
+#define MCF_EPORT_EPPAR_EPPA3_LEVEL    (0x0000)
+#define MCF_EPORT_EPPAR_EPPA3_RISING   (0x0040)
+#define MCF_EPORT_EPPAR_EPPA3_FALLING  (0x0080)
+#define MCF_EPORT_EPPAR_EPPA3_BOTH     (0x00C0)
+#define MCF_EPORT_EPPAR_EPPA2_LEVEL    (0x0000)
+#define MCF_EPORT_EPPAR_EPPA2_RISING   (0x0010)
+#define MCF_EPORT_EPPAR_EPPA2_FALLING  (0x0020)
+#define MCF_EPORT_EPPAR_EPPA2_BOTH     (0x0030)
+#define MCF_EPORT_EPPAR_EPPA1_LEVEL    (0x0000)
+#define MCF_EPORT_EPPAR_EPPA1_RISING   (0x0004)
+#define MCF_EPORT_EPPAR_EPPA1_FALLING  (0x0008)
+#define MCF_EPORT_EPPAR_EPPA1_BOTH     (0x000C)
+
+/* Bit definitions and macros for MCF_EPORT_EPDDR */
+#define MCF_EPORT_EPDDR_EPDD1          (0x02)
+#define MCF_EPORT_EPDDR_EPDD2          (0x04)
+#define MCF_EPORT_EPDDR_EPDD3          (0x08)
+#define MCF_EPORT_EPDDR_EPDD4          (0x10)
+#define MCF_EPORT_EPDDR_EPDD5          (0x20)
+#define MCF_EPORT_EPDDR_EPDD6          (0x40)
+#define MCF_EPORT_EPDDR_EPDD7          (0x80)
+
+/* Bit definitions and macros for MCF_EPORT_EPIER */
+#define MCF_EPORT_EPIER_EPIE1          (0x02)
+#define MCF_EPORT_EPIER_EPIE2          (0x04)
+#define MCF_EPORT_EPIER_EPIE3          (0x08)
+#define MCF_EPORT_EPIER_EPIE4          (0x10)
+#define MCF_EPORT_EPIER_EPIE5          (0x20)
+#define MCF_EPORT_EPIER_EPIE6          (0x40)
+#define MCF_EPORT_EPIER_EPIE7          (0x80)
+
+/* Bit definitions and macros for MCF_EPORT_EPDR */
+#define MCF_EPORT_EPDR_EPD1            (0x02)
+#define MCF_EPORT_EPDR_EPD2            (0x04)
+#define MCF_EPORT_EPDR_EPD3            (0x08)
+#define MCF_EPORT_EPDR_EPD4            (0x10)
+#define MCF_EPORT_EPDR_EPD5            (0x20)
+#define MCF_EPORT_EPDR_EPD6            (0x40)
+#define MCF_EPORT_EPDR_EPD7            (0x80)
+
+/* Bit definitions and macros for MCF_EPORT_EPPDR */
+#define MCF_EPORT_EPPDR_EPPD1          (0x02)
+#define MCF_EPORT_EPPDR_EPPD2          (0x04)
+#define MCF_EPORT_EPPDR_EPPD3          (0x08)
+#define MCF_EPORT_EPPDR_EPPD4          (0x10)
+#define MCF_EPORT_EPPDR_EPPD5          (0x20)
+#define MCF_EPORT_EPPDR_EPPD6          (0x40)
+#define MCF_EPORT_EPPDR_EPPD7          (0x80)
+
+/* Bit definitions and macros for MCF_EPORT_EPFR */
+#define MCF_EPORT_EPFR_EPF1            (0x02)
+#define MCF_EPORT_EPFR_EPF2            (0x04)
+#define MCF_EPORT_EPFR_EPF3            (0x08)
+#define MCF_EPORT_EPFR_EPF4            (0x10)
+#define MCF_EPORT_EPFR_EPF5            (0x20)
+#define MCF_EPORT_EPFR_EPF6            (0x40)
+#define MCF_EPORT_EPFR_EPF7            (0x80)
+
+/********************************************************************/
+#endif	/* m532xsim_h */
diff --git a/arch/m68knommu/include/asm/m5407sim.h b/arch/m68knommu/include/asm/m5407sim.h
new file mode 100644
index 00000000000..cc22c4a5300
--- /dev/null
+++ b/arch/m68knommu/include/asm/m5407sim.h
@@ -0,0 +1,157 @@
+/****************************************************************************/
+
+/*
+ *	m5407sim.h -- ColdFire 5407 System Integration Module support.
+ *
+ *	(C) Copyright 2000,  Lineo (www.lineo.com)
+ *	(C) Copyright 1999,  Moreton Bay Ventures Pty Ltd.
+ *
+ *      Modified by David W. Miller for the MCF5307 Eval Board.
+ */
+
+/****************************************************************************/
+#ifndef	m5407sim_h
+#define	m5407sim_h
+/****************************************************************************/
+
+/*
+ *	Define the 5407 SIM register set addresses.
+ */
+#define	MCFSIM_RSR		0x00		/* Reset Status reg (r/w) */
+#define	MCFSIM_SYPCR		0x01		/* System Protection reg (r/w)*/
+#define	MCFSIM_SWIVR		0x02		/* SW Watchdog intr reg (r/w) */
+#define	MCFSIM_SWSR		0x03		/* SW Watchdog service (r/w) */
+#define	MCFSIM_PAR		0x04		/* Pin Assignment reg (r/w) */
+#define	MCFSIM_IRQPAR		0x06		/* Interrupt Assignment reg (r/w) */
+#define	MCFSIM_PLLCR		0x08		/* PLL Controll Reg*/
+#define	MCFSIM_MPARK		0x0C		/* BUS Master Control Reg*/
+#define	MCFSIM_IPR		0x40		/* Interrupt Pend reg (r/w) */
+#define	MCFSIM_IMR		0x44		/* Interrupt Mask reg (r/w) */
+#define	MCFSIM_AVR		0x4b		/* Autovector Ctrl reg (r/w) */
+#define	MCFSIM_ICR0		0x4c		/* Intr Ctrl reg 0 (r/w) */
+#define	MCFSIM_ICR1		0x4d		/* Intr Ctrl reg 1 (r/w) */
+#define	MCFSIM_ICR2		0x4e		/* Intr Ctrl reg 2 (r/w) */
+#define	MCFSIM_ICR3		0x4f		/* Intr Ctrl reg 3 (r/w) */
+#define	MCFSIM_ICR4		0x50		/* Intr Ctrl reg 4 (r/w) */
+#define	MCFSIM_ICR5		0x51		/* Intr Ctrl reg 5 (r/w) */
+#define	MCFSIM_ICR6		0x52		/* Intr Ctrl reg 6 (r/w) */
+#define	MCFSIM_ICR7		0x53		/* Intr Ctrl reg 7 (r/w) */
+#define	MCFSIM_ICR8		0x54		/* Intr Ctrl reg 8 (r/w) */
+#define	MCFSIM_ICR9		0x55		/* Intr Ctrl reg 9 (r/w) */
+#define	MCFSIM_ICR10		0x56		/* Intr Ctrl reg 10 (r/w) */
+#define	MCFSIM_ICR11		0x57		/* Intr Ctrl reg 11 (r/w) */
+
+#define MCFSIM_CSAR0		0x80		/* CS 0 Address 0 reg (r/w) */
+#define MCFSIM_CSMR0		0x84		/* CS 0 Mask 0 reg (r/w) */
+#define MCFSIM_CSCR0		0x8a		/* CS 0 Control reg (r/w) */
+#define MCFSIM_CSAR1		0x8c		/* CS 1 Address reg (r/w) */
+#define MCFSIM_CSMR1		0x90		/* CS 1 Mask reg (r/w) */
+#define MCFSIM_CSCR1		0x96		/* CS 1 Control reg (r/w) */
+
+#define MCFSIM_CSAR2		0x98		/* CS 2 Address reg (r/w) */
+#define MCFSIM_CSMR2		0x9c		/* CS 2 Mask reg (r/w) */
+#define MCFSIM_CSCR2		0xa2		/* CS 2 Control reg (r/w) */
+#define MCFSIM_CSAR3		0xa4		/* CS 3 Address reg (r/w) */
+#define MCFSIM_CSMR3		0xa8		/* CS 3 Mask reg (r/w) */
+#define MCFSIM_CSCR3		0xae		/* CS 3 Control reg (r/w) */
+#define MCFSIM_CSAR4		0xb0		/* CS 4 Address reg (r/w) */
+#define MCFSIM_CSMR4		0xb4		/* CS 4 Mask reg (r/w) */
+#define MCFSIM_CSCR4		0xba		/* CS 4 Control reg (r/w) */
+#define MCFSIM_CSAR5		0xbc		/* CS 5 Address reg (r/w) */
+#define MCFSIM_CSMR5		0xc0		/* CS 5 Mask reg (r/w) */
+#define MCFSIM_CSCR5		0xc6		/* CS 5 Control reg (r/w) */
+#define MCFSIM_CSAR6		0xc8		/* CS 6 Address reg (r/w) */
+#define MCFSIM_CSMR6		0xcc		/* CS 6 Mask reg (r/w) */
+#define MCFSIM_CSCR6		0xd2		/* CS 6 Control reg (r/w) */
+#define MCFSIM_CSAR7		0xd4		/* CS 7 Address reg (r/w) */
+#define MCFSIM_CSMR7		0xd8		/* CS 7 Mask reg (r/w) */
+#define MCFSIM_CSCR7		0xde		/* CS 7 Control reg (r/w) */
+
+#define MCFSIM_DCR		0x100		/* DRAM Control reg (r/w) */
+#define MCFSIM_DACR0		0x108		/* DRAM 0 Addr and Ctrl (r/w) */
+#define MCFSIM_DMR0		0x10c		/* DRAM 0 Mask reg (r/w) */
+#define MCFSIM_DACR1		0x110		/* DRAM 1 Addr and Ctrl (r/w) */
+#define MCFSIM_DMR1		0x114		/* DRAM 1 Mask reg (r/w) */
+
+#define	MCFSIM_PADDR		0x244		/* Parallel Direction (r/w) */
+#define	MCFSIM_PADAT		0x248		/* Parallel Data (r/w) */
+
+
+/*
+ *	Some symbol defines for the above...
+ */
+#define	MCFSIM_SWDICR		MCFSIM_ICR0	/* Watchdog timer ICR */
+#define	MCFSIM_TIMER1ICR	MCFSIM_ICR1	/* Timer 1 ICR */
+#define	MCFSIM_TIMER2ICR	MCFSIM_ICR2	/* Timer 2 ICR */
+#define	MCFSIM_UART1ICR		MCFSIM_ICR4	/* UART 1 ICR */
+#define	MCFSIM_UART2ICR		MCFSIM_ICR5	/* UART 2 ICR */
+#define	MCFSIM_DMA0ICR		MCFSIM_ICR6	/* DMA 0 ICR */
+#define	MCFSIM_DMA1ICR		MCFSIM_ICR7	/* DMA 1 ICR */
+#define	MCFSIM_DMA2ICR		MCFSIM_ICR8	/* DMA 2 ICR */
+#define	MCFSIM_DMA3ICR		MCFSIM_ICR9	/* DMA 3 ICR */
+
+/*
+ *	Macro to set IMR register. It is 32 bits on the 5407.
+ */
+#define	mcf_getimr()		\
+	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR))
+
+#define	mcf_setimr(imr)		\
+	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr);
+
+#define	mcf_getipr()		\
+	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR))
+
+
+/*
+ *	Some symbol defines for the Parallel Port Pin Assignment Register
+ */
+#define MCFSIM_PAR_DREQ0        0x40            /* Set to select DREQ0 input */
+                                                /* Clear to select par I/O */
+#define MCFSIM_PAR_DREQ1        0x20            /* Select DREQ1 input */
+                                                /* Clear to select par I/O */
+
+/*
+ *       Defines for the IRQPAR Register
+ */
+#define IRQ5_LEVEL4	0x80
+#define IRQ3_LEVEL6	0x40
+#define IRQ1_LEVEL2	0x20
+
+
+/*
+ *	Define the Cache register flags.
+ */
+#define	CACR_DEC		0x80000000	/* Enable data cache */
+#define	CACR_DWP		0x40000000	/* Data write protection */
+#define	CACR_DESB		0x20000000	/* Enable data store buffer */
+#define	CACR_DDPI		0x10000000	/* Disable CPUSHL */
+#define	CACR_DHCLK		0x08000000	/* Half data cache lock mode */
+#define	CACR_DDCM_WT		0x00000000	/* Write through cache*/
+#define	CACR_DDCM_CP		0x02000000	/* Copyback cache */
+#define	CACR_DDCM_P		0x04000000	/* No cache, precise */
+#define	CACR_DDCM_IMP		0x06000000	/* No cache, imprecise */
+#define	CACR_DCINVA		0x01000000	/* Invalidate data cache */
+#define	CACR_BEC		0x00080000	/* Enable branch cache */
+#define	CACR_BCINVA		0x00040000	/* Invalidate branch cache */
+#define	CACR_IEC		0x00008000	/* Enable instruction cache */
+#define	CACR_DNFB		0x00002000	/* Inhibited fill buffer */
+#define	CACR_IDPI		0x00001000	/* Disable CPUSHL */
+#define	CACR_IHLCK		0x00000800	/* Intruction cache half lock */
+#define	CACR_IDCM		0x00000400	/* Intruction cache inhibit */
+#define	CACR_ICINVA		0x00000100	/* Invalidate instr cache */
+
+#define	ACR_BASE_POS		24		/* Address Base */
+#define	ACR_MASK_POS		16		/* Address Mask */
+#define	ACR_ENABLE		0x00008000	/* Enable address */
+#define	ACR_USER		0x00000000	/* User mode access only */
+#define	ACR_SUPER		0x00002000	/* Supervisor mode only */
+#define	ACR_ANY			0x00004000	/* Match any access mode */
+#define	ACR_CM_WT		0x00000000	/* Write through mode */
+#define	ACR_CM_CP		0x00000020	/* Copyback mode */
+#define	ACR_CM_OFF_PRE		0x00000040	/* No cache, precise */
+#define	ACR_CM_OFF_IMP		0x00000060	/* No cache, imprecise */
+#define	ACR_WPROTECT		0x00000004	/* Write protect */
+
+/****************************************************************************/
+#endif	/* m5407sim_h */
diff --git a/arch/m68knommu/include/asm/m68360.h b/arch/m68knommu/include/asm/m68360.h
new file mode 100644
index 00000000000..eb7d39ef285
--- /dev/null
+++ b/arch/m68knommu/include/asm/m68360.h
@@ -0,0 +1,13 @@
+#include "m68360_regs.h"
+#include "m68360_pram.h"
+#include "m68360_quicc.h"
+#include "m68360_enet.h"
+
+#ifdef CONFIG_M68360
+
+#define CPM_INTERRUPT    4
+
+/* see MC68360 User's Manual, p. 7-377  */
+#define CPM_VECTOR_BASE  0x04           /* 3 MSbits of CPM vector */
+
+#endif /* CONFIG_M68360 */
diff --git a/arch/m68knommu/include/asm/m68360_enet.h b/arch/m68knommu/include/asm/m68360_enet.h
new file mode 100644
index 00000000000..c36f4d05920
--- /dev/null
+++ b/arch/m68knommu/include/asm/m68360_enet.h
@@ -0,0 +1,177 @@
+/***********************************
+ * $Id: m68360_enet.h,v 1.1 2002/03/02 15:01:07 gerg Exp $
+ ***********************************
+ *
+ ***************************************
+ * Definitions for the ETHERNET controllers
+ ***************************************
+ */
+
+#ifndef __ETHER_H
+#define __ETHER_H
+
+#include "quicc_simple.h"
+
+/*
+ * transmit BD's
+ */
+#define T_R     0x8000          /* ready bit */
+#define E_T_PAD 0x4000          /* short frame padding */
+#define T_W     0x2000          /* wrap bit */
+#define T_I     0x1000          /* interrupt on completion */
+#define T_L     0x0800          /* last in frame */
+#define T_TC    0x0400          /* transmit CRC (when last) */
+
+#define T_DEF   0x0200          /* defer indication */
+#define T_HB    0x0100          /* heartbeat */
+#define T_LC    0x0080          /* error: late collision */
+#define T_RL    0x0040          /* error: retransmission limit */
+#define T_RC    0x003c          /* retry count */
+#define T_UN    0x0002          /* error: underrun */
+#define T_CSL   0x0001          /* carier sense lost */
+#define T_ERROR (T_HB | T_LC | T_RL | T_UN | T_CSL)
+
+/*
+ * receive BD's
+ */
+#define R_E     0x8000          /* buffer empty */
+#define R_W     0x2000          /* wrap bit */
+#define R_I     0x1000          /* interrupt on reception */
+#define R_L     0x0800          /* last BD in frame */
+#define R_F     0x0400          /* first BD in frame */
+#define R_M     0x0100          /* received because of promisc. mode */
+
+#define R_LG    0x0020          /* frame too long */
+#define R_NO    0x0010          /* non-octet aligned */
+#define R_SH    0x0008          /* short frame */
+#define R_CR    0x0004          /* receive CRC error */
+#define R_OV    0x0002          /* receive overrun */
+#define R_CL    0x0001          /* collision */
+#define ETHER_R_ERROR (R_LG | R_NO | R_SH | R_CR | R_OV | R_CL)
+
+
+/*
+ * ethernet interrupts
+ */
+#define ETHERNET_GRA    0x0080  /* graceful stop complete */
+#define ETHERNET_TXE    0x0010  /* transmit error         */
+#define ETHERNET_RXF    0x0008  /* receive frame          */
+#define ETHERNET_BSY    0x0004  /* busy condition         */
+#define ETHERNET_TXB    0x0002  /* transmit buffer        */
+#define ETHERNET_RXB    0x0001  /* receive buffer         */
+
+/*
+ * ethernet protocol specific mode register (PSMR)
+ */
+#define ETHER_HBC       0x8000    /* heartbeat checking      */
+#define ETHER_FC        0x4000    /* force collision         */
+#define ETHER_RSH       0x2000    /* receive short frames    */
+#define ETHER_IAM       0x1000    /* individual address mode */
+#define ETHER_CRC_32    (0x2<<10) /* Enable CRC              */
+#define ETHER_PRO       0x0200    /* promiscuous             */
+#define ETHER_BRO       0x0100    /* broadcast address       */
+#define ETHER_SBT       0x0080    /* stop backoff timer      */
+#define ETHER_LPB       0x0040    /* Loop Back Mode          */
+#define ETHER_SIP       0x0020    /* sample input pins       */
+#define ETHER_LCW       0x0010    /* late collision window   */
+#define ETHER_NIB_13    (0x0<<1)  /* # of ignored bits 13    */
+#define ETHER_NIB_14    (0x1<<1)  /* # of ignored bits 14    */
+#define ETHER_NIB_15    (0x2<<1)  /* # of ignored bits 15    */
+#define ETHER_NIB_16    (0x3<<1)  /* # of ignored bits 16    */
+#define ETHER_NIB_21    (0x4<<1)  /* # of ignored bits 21    */
+#define ETHER_NIB_22    (0x5<<1)  /* # of ignored bits 22    */
+#define ETHER_NIB_23    (0x6<<1)  /* # of ignored bits 23    */
+#define ETHER_NIB_24    (0x7<<1)  /* # of ignored bits 24    */
+
+/*
+ * ethernet specific parameters
+ */
+#define CRC_WORD 4          /* Length in bytes of CRC */               
+#define C_PRES   0xffffffff /* preform 32 bit CRC */
+#define C_MASK   0xdebb20e3 /* comply with 32 bit CRC */       
+#define CRCEC    0x00000000
+#define ALEC     0x00000000
+#define DISFC    0x00000000
+#define PADS     0x00000000
+#define RET_LIM  0x000f     /* retry 15 times to send a frame before interrupt */
+#define ETH_MFLR 0x05ee     /* 1518 max frame size */
+#define MINFLR   0x0040     /* Minimum frame size 64 */
+#define MAXD1    0x05ee     /* Max dma count 1518 */
+#define MAXD2    0x05ee
+#define GADDR1   0x00000000 /* Clear group address */  
+#define GADDR2   0x00000000
+#define GADDR3   0x00000000    
+#define GADDR4   0x00000000    
+#define P_PER    0x00000000 /*not used */              
+#define IADDR1   0x00000000 /* Individual hash table not used */       
+#define IADDR2   0x00000000
+#define IADDR3   0x00000000    
+#define IADDR4   0x00000000            
+#define TADDR_H  0x00000000 /* clear this regs */              
+#define TADDR_M  0x00000000            
+#define TADDR_L  0x00000000            
+
+/*       SCC Parameter Ram */
+#define RFCR    0x18 /* normal operation */
+#define TFCR    0x18 /* normal operation */
+#define E_MRBLR 1518 /* Max ethernet frame length */
+
+/*
+ * ethernet specific structure
+ */
+typedef union {
+        unsigned char b[6];
+        struct {
+            unsigned short high;
+            unsigned short middl;
+            unsigned short low;
+        } w;
+} ETHER_ADDR;
+
+typedef struct {
+    int        max_frame_length;
+    int        promisc_mode;
+    int        reject_broadcast;
+    ETHER_ADDR phys_adr;
+} ETHER_SPECIFIC;
+
+typedef struct {
+    ETHER_ADDR     dst_addr;
+    ETHER_ADDR     src_addr;
+    unsigned short type_or_len;
+    unsigned char  data[1];
+} ETHER_FRAME;
+
+#define MAX_DATALEN 1500
+typedef struct {
+    ETHER_ADDR     dst_addr;
+    ETHER_ADDR     src_addr;
+    unsigned short type_or_len;
+    unsigned char  data[MAX_DATALEN];
+    unsigned char  fcs[CRC_WORD];
+} ETHER_MAX_FRAME;
+
+
+/*
+ * Internal ethernet function prototypes
+ */
+void        ether_interrupt(int scc_num);
+/* mleslie: debug */
+/* static void ethernet_rx_internal(int scc_num); */
+/* static void ethernet_tx_internal(int scc_num); */
+
+/*
+ * User callable routines prototypes (ethernet specific)
+ */
+void ethernet_init(int                       scc_number,
+                   alloc_routine             *alloc_buffer,
+                   free_routine              *free_buffer,
+                   store_rx_buffer_routine   *store_rx_buffer,
+                   handle_tx_error_routine   *handle_tx_error,
+                   handle_rx_error_routine   *handle_rx_error,
+                   handle_lost_error_routine *handle_lost_error,
+                   ETHER_SPECIFIC            *ether_spec);
+int  ethernet_tx(int scc_number, void *buf, int length);
+
+#endif
+
diff --git a/arch/m68knommu/include/asm/m68360_pram.h b/arch/m68knommu/include/asm/m68360_pram.h
new file mode 100644
index 00000000000..e6088bbce93
--- /dev/null
+++ b/arch/m68knommu/include/asm/m68360_pram.h
@@ -0,0 +1,431 @@
+/***********************************
+ * $Id: m68360_pram.h,v 1.1 2002/03/02 15:01:07 gerg Exp $
+ ***********************************
+ *
+ ***************************************
+ * Definitions of the parameter area RAM.
+ * Note that different structures are overlaid
+ * at the same offsets for the different modes
+ * of operation.
+ ***************************************
+ */
+
+#ifndef __PRAM_H
+#define __PRAM_H
+
+/* Time slot assignment table */
+#define VALID_SLOT	0x8000
+#define WRAP_SLOT	0x4000
+
+/*****************************************************************
+        Global Multichannel parameter RAM
+*****************************************************************/
+struct global_multi_pram {
+    /*
+     * Global Multichannel parameter RAM
+     */
+    unsigned long   mcbase;		/* Multichannel Base pointer */
+    unsigned short  qmcstate;		/* Multichannel Controller state */
+    unsigned short  mrblr;		/* Maximum Receive Buffer Length */
+    unsigned short  tx_s_ptr;		/* TSTATx Pointer */
+    unsigned short  rxptr;		/* Current Time slot entry in TSATRx */
+    unsigned short  grfthr;		/* Global Receive frame threshold */
+    unsigned short  grfcnt;		/* Global Receive Frame Count */
+    unsigned long   intbase;		/* Multichannel Base address */
+    unsigned long   iintptr;		/* Pointer to interrupt queue */
+    unsigned short  rx_s_ptr;		/* TSTARx Pointer */
+
+    unsigned short  txptr;		/* Current Time slot entry in TSATTx */
+    unsigned long   c_mask32;		/* CRC Constant (debb20e3) */
+    unsigned short  tsatrx[32];		/* Time Slot Assignment Table Rx */
+    unsigned short  tsattx[32];		/* Time Slot Assignment Table Tx */
+    unsigned short  c_mask16;		/* CRC Constant (f0b8) */
+};
+
+/*****************************************************************
+        Quicc32 HDLC parameter RAM
+*****************************************************************/
+struct quicc32_pram {
+
+    unsigned short  tbase;		/* Tx Buffer Descriptors Base Address */
+    unsigned short  chamr;		/* Channel Mode Register */
+    unsigned long   tstate;		/* Tx Internal State */
+    unsigned long   txintr;		/* Tx Internal Data Pointer */
+    unsigned short  tbptr;		/* Tx Buffer Descriptor Pointer */
+    unsigned short  txcntr;		/* Tx Internal Byte Count */
+    unsigned long   tupack;		/* (Tx Temp) */
+    unsigned long   zistate;		/* Zero Insertion machine state */
+    unsigned long   tcrc;		/* Temp Transmit CRC */
+    unsigned short  intmask;		/* Channel's interrupt mask flags */
+    unsigned short  bdflags;		
+    unsigned short  rbase;		/* Rx Buffer Descriptors Base Address */
+    unsigned short  mflr;		/* Max Frame Length Register */
+    unsigned long   rstate;		/* Rx Internal State */
+    unsigned long   rxintr;		/* Rx Internal Data Pointer */
+    unsigned short  rbptr;		/* Rx Buffer Descriptor Pointer */
+    unsigned short  rxbyc;		/* Rx Internal Byte Count */
+    unsigned long   rpack;		/* (Rx Temp) */
+    unsigned long   zdstate;		/* Zero Deletion machine state */
+    unsigned long   rcrc;		/* Temp Transmit CRC */
+    unsigned short  maxc;		/* Max_length counter */
+    unsigned short  tmp_mb;		/* Temp */
+};
+
+
+/*****************************************************************
+        HDLC parameter RAM
+*****************************************************************/
+
+struct hdlc_pram {
+    /*
+     * SCC parameter RAM
+     */
+    unsigned short  rbase;          /* RX BD base address */
+    unsigned short  tbase;          /* TX BD base address */
+    unsigned char   rfcr;           /* Rx function code */
+    unsigned char   tfcr;           /* Tx function code */
+    unsigned short  mrblr;          /* Rx buffer length */
+    unsigned long   rstate;         /* Rx internal state */
+    unsigned long   rptr;           /* Rx internal data pointer */
+    unsigned short  rbptr;          /* rb BD Pointer */
+    unsigned short  rcount;         /* Rx internal byte count */
+    unsigned long   rtemp;          /* Rx temp */
+    unsigned long   tstate;         /* Tx internal state */
+    unsigned long   tptr;           /* Tx internal data pointer */
+    unsigned short  tbptr;          /* Tx BD pointer */
+    unsigned short  tcount;         /* Tx byte count */
+    unsigned long   ttemp;          /* Tx temp */
+    unsigned long   rcrc;           /* temp receive CRC */
+    unsigned long   tcrc;           /* temp transmit CRC */
+   
+    /*
+     * HDLC specific parameter RAM
+     */
+    unsigned char   RESERVED1[4];   /* Reserved area */
+    unsigned long   c_mask;         /* CRC constant */
+    unsigned long   c_pres;         /* CRC preset */
+    unsigned short  disfc;          /* discarded frame counter */
+    unsigned short  crcec;          /* CRC error counter */
+    unsigned short  abtsc;          /* abort sequence counter */
+    unsigned short  nmarc;          /* nonmatching address rx cnt */
+    unsigned short  retrc;          /* frame retransmission cnt */
+    unsigned short  mflr;           /* maximum frame length reg */
+    unsigned short  max_cnt;        /* maximum length counter */
+    unsigned short  rfthr;          /* received frames threshold */
+    unsigned short  rfcnt;          /* received frames count */
+    unsigned short  hmask;          /* user defined frm addr mask */
+    unsigned short  haddr1;         /* user defined frm address 1 */
+    unsigned short  haddr2;         /* user defined frm address 2 */
+    unsigned short  haddr3;         /* user defined frm address 3 */
+    unsigned short  haddr4;         /* user defined frm address 4 */
+    unsigned short  tmp;            /* temp */
+    unsigned short  tmp_mb;         /* temp */
+};
+
+
+
+/*****************************************************************
+        UART parameter RAM
+*****************************************************************/
+
+/*
+ * bits in uart control characters table
+ */
+#define CC_INVALID  0x8000          /* control character is valid */
+#define CC_REJ      0x4000          /* don't store char in buffer */
+#define CC_CHAR     0x00ff          /* control character */
+
+/* UART */
+struct uart_pram {
+    /*
+     * SCC parameter RAM
+     */
+    unsigned short  rbase;          /* RX BD base address */
+    unsigned short  tbase;          /* TX BD base address */
+    unsigned char   rfcr;           /* Rx function code */
+    unsigned char   tfcr;           /* Tx function code */
+    unsigned short  mrblr;          /* Rx buffer length */
+    unsigned long   rstate;         /* Rx internal state */
+    unsigned long   rptr;           /* Rx internal data pointer */
+    unsigned short  rbptr;          /* rb BD Pointer */
+    unsigned short  rcount;         /* Rx internal byte count */
+    unsigned long   rx_temp;        /* Rx temp */
+    unsigned long   tstate;         /* Tx internal state */
+    unsigned long   tptr;           /* Tx internal data pointer */
+    unsigned short  tbptr;          /* Tx BD pointer */
+    unsigned short  tcount;         /* Tx byte count */
+    unsigned long   ttemp;          /* Tx temp */
+    unsigned long   rcrc;           /* temp receive CRC */
+    unsigned long   tcrc;           /* temp transmit CRC */
+   
+    /*
+     * UART specific parameter RAM
+     */
+    unsigned char   RESERVED1[8];   /* Reserved area */
+    unsigned short  max_idl;        /* maximum idle characters */
+    unsigned short  idlc;           /* rx idle counter (internal) */
+    unsigned short  brkcr;          /* break count register */
+                   
+    unsigned short  parec;          /* Rx parity error counter */
+    unsigned short  frmer;          /* Rx framing error counter */
+    unsigned short  nosec;          /* Rx noise counter */
+    unsigned short  brkec;          /* Rx break character counter */
+    unsigned short  brkln;          /* Reaceive break length */
+                   
+    unsigned short  uaddr1;         /* address character 1 */
+    unsigned short  uaddr2;         /* address character 2 */
+    unsigned short  rtemp;          /* temp storage */
+    unsigned short  toseq;          /* Tx out of sequence char */
+    unsigned short  cc[8];          /* Rx control characters */
+    unsigned short  rccm;           /* Rx control char mask */
+    unsigned short  rccr;           /* Rx control char register */
+    unsigned short  rlbc;           /* Receive last break char */
+};
+
+
+
+/*****************************************************************
+        BISYNC parameter RAM
+*****************************************************************/
+
+struct bisync_pram {
+    /*
+     * SCC parameter RAM
+     */
+    unsigned short  rbase;          /* RX BD base address */
+    unsigned short  tbase;          /* TX BD base address */
+    unsigned char   rfcr;           /* Rx function code */
+    unsigned char   tfcr;           /* Tx function code */
+    unsigned short  mrblr;          /* Rx buffer length */
+    unsigned long   rstate;         /* Rx internal state */
+    unsigned long   rptr;           /* Rx internal data pointer */
+    unsigned short  rbptr;          /* rb BD Pointer */
+    unsigned short  rcount;         /* Rx internal byte count */
+    unsigned long   rtemp;          /* Rx temp */
+    unsigned long   tstate;         /* Tx internal state */
+    unsigned long   tptr;           /* Tx internal data pointer */
+    unsigned short  tbptr;          /* Tx BD pointer */
+    unsigned short  tcount;         /* Tx byte count */
+    unsigned long   ttemp;          /* Tx temp */
+    unsigned long   rcrc;           /* temp receive CRC */
+    unsigned long   tcrc;           /* temp transmit CRC */
+   
+    /*
+     * BISYNC specific parameter RAM
+     */
+    unsigned char   RESERVED1[4];   /* Reserved area */
+    unsigned long   crcc;           /* CRC Constant Temp Value */
+    unsigned short  prcrc;          /* Preset Receiver CRC-16/LRC */
+    unsigned short  ptcrc;          /* Preset Transmitter CRC-16/LRC */
+    unsigned short  parec;          /* Receive Parity Error Counter */
+    unsigned short  bsync;          /* BISYNC SYNC Character */
+    unsigned short  bdle;           /* BISYNC DLE Character */
+    unsigned short  cc[8];          /* Rx control characters */
+    unsigned short  rccm;           /* Receive Control Character Mask */
+};
+
+/*****************************************************************
+        IOM2 parameter RAM
+        (overlaid on tx bd[5] of SCC channel[2])
+*****************************************************************/
+struct iom2_pram {
+    unsigned short  ci_data;        /* ci data */
+    unsigned short  monitor_data;   /* monitor data */
+    unsigned short  tstate;         /* transmitter state */
+    unsigned short  rstate;         /* receiver state */
+};
+
+/*****************************************************************
+        SPI/SMC parameter RAM
+        (overlaid on tx bd[6,7] of SCC channel[2])
+*****************************************************************/
+
+#define SPI_R       0x8000          /* Ready bit in BD */
+
+struct spi_pram {
+    unsigned short  rbase;          /* Rx BD Base Address */
+    unsigned short  tbase;          /* Tx BD Base Address */
+    unsigned char   rfcr;           /* Rx function code */
+    unsigned char   tfcr;           /* Tx function code */
+    unsigned short  mrblr;          /* Rx buffer length */
+    unsigned long   rstate;         /* Rx internal state */
+    unsigned long   rptr;           /* Rx internal data pointer */
+    unsigned short  rbptr;          /* rb BD Pointer */
+    unsigned short  rcount;         /* Rx internal byte count */
+    unsigned long   rtemp;          /* Rx temp */
+    unsigned long   tstate;         /* Tx internal state */
+    unsigned long   tptr;           /* Tx internal data pointer */
+    unsigned short  tbptr;          /* Tx BD pointer */
+    unsigned short  tcount;         /* Tx byte count */
+    unsigned long   ttemp;          /* Tx temp */
+};
+
+struct smc_uart_pram {
+    unsigned short  rbase;          /* Rx BD Base Address */
+    unsigned short  tbase;          /* Tx BD Base Address */
+    unsigned char   rfcr;           /* Rx function code */
+    unsigned char   tfcr;           /* Tx function code */
+    unsigned short  mrblr;          /* Rx buffer length */
+    unsigned long   rstate;         /* Rx internal state */
+    unsigned long   rptr;           /* Rx internal data pointer */
+    unsigned short  rbptr;          /* rb BD Pointer */
+    unsigned short  rcount;         /* Rx internal byte count */
+    unsigned long   rtemp;          /* Rx temp */
+    unsigned long   tstate;         /* Tx internal state */
+    unsigned long   tptr;           /* Tx internal data pointer */
+    unsigned short  tbptr;          /* Tx BD pointer */
+    unsigned short  tcount;         /* Tx byte count */
+    unsigned long   ttemp;          /* Tx temp */
+    unsigned short  max_idl;        /* Maximum IDLE Characters */
+    unsigned short  idlc;           /* Temporary IDLE Counter */
+    unsigned short  brkln;          /* Last Rx Break Length */
+    unsigned short  brkec;          /* Rx Break Condition Counter */
+    unsigned short  brkcr;          /* Break Count Register (Tx) */
+    unsigned short  r_mask;         /* Temporary bit mask */
+};
+
+struct smc_trnsp_pram {
+    unsigned short  rbase;          /* rx BD Base Address */
+    unsigned short  tbase;          /* Tx BD Base Address */
+    unsigned char   rfcr;           /* Rx function code */
+    unsigned char   tfcr;           /* Tx function code */
+    unsigned short  mrblr;          /* Rx buffer length */
+    unsigned long   rstate;         /* Rx internal state */
+    unsigned long   rptr;           /* Rx internal data pointer */
+    unsigned short  rbptr;          /* rb BD Pointer */
+    unsigned short  rcount;         /* Rx internal byte count */
+    unsigned long   rtemp;          /* Rx temp */
+    unsigned long   tstate;         /* Tx internal state */
+    unsigned long   tptr;           /* Tx internal data pointer */
+    unsigned short  tbptr;          /* Tx BD pointer */
+    unsigned short  tcount;         /* Tx byte count */
+    unsigned long   ttemp;          /* Tx temp */
+    unsigned short  reserved[5];    /* Reserved */
+};
+
+struct idma_pram {
+    unsigned short  ibase;          /* IDMA BD Base Address */
+    unsigned short  ibptr;          /* IDMA buffer descriptor pointer */
+    unsigned long   istate;         /* IDMA internal state */
+    unsigned long   itemp;          /* IDMA temp */
+};
+
+struct ethernet_pram {
+    /*
+     * SCC parameter RAM
+     */
+    unsigned short  rbase;          /* RX BD base address */
+    unsigned short  tbase;          /* TX BD base address */
+    unsigned char   rfcr;           /* Rx function code */
+    unsigned char   tfcr;           /* Tx function code */
+    unsigned short  mrblr;          /* Rx buffer length */
+    unsigned long   rstate;         /* Rx internal state */
+    unsigned long   rptr;           /* Rx internal data pointer */
+    unsigned short  rbptr;          /* rb BD Pointer */
+    unsigned short  rcount;         /* Rx internal byte count */
+    unsigned long   rtemp;          /* Rx temp */
+    unsigned long   tstate;         /* Tx internal state */
+    unsigned long   tptr;           /* Tx internal data pointer */
+    unsigned short  tbptr;          /* Tx BD pointer */
+    unsigned short  tcount;         /* Tx byte count */
+    unsigned long   ttemp;          /* Tx temp */
+    unsigned long   rcrc;           /* temp receive CRC */
+    unsigned long   tcrc;           /* temp transmit CRC */
+   
+    /*
+     * ETHERNET specific parameter RAM
+     */
+    unsigned long   c_pres;         /* preset CRC */
+    unsigned long   c_mask;         /* constant mask for CRC */
+    unsigned long   crcec;          /* CRC error counter */
+    unsigned long   alec;           /* alighnment error counter */
+    unsigned long   disfc;          /* discard frame counter */
+    unsigned short  pads;           /* short frame PAD characters */
+    unsigned short  ret_lim;        /* retry limit threshold */
+    unsigned short  ret_cnt;        /* retry limit counter */
+    unsigned short  mflr;           /* maximum frame length reg */
+    unsigned short  minflr;         /* minimum frame length reg */
+    unsigned short  maxd1;          /* maximum DMA1 length reg */
+    unsigned short  maxd2;          /* maximum DMA2 length reg */
+    unsigned short  maxd;           /* rx max DMA */
+    unsigned short  dma_cnt;        /* rx dma counter */
+    unsigned short  max_b;          /* max bd byte count */
+    unsigned short  gaddr1;         /* group address filter 1 */
+    unsigned short  gaddr2;         /* group address filter 2 */
+    unsigned short  gaddr3;         /* group address filter 3 */
+    unsigned short  gaddr4;         /* group address filter 4 */
+    unsigned long   tbuf0_data0;    /* save area 0 - current frm */
+    unsigned long   tbuf0_data1;    /* save area 1 - current frm */
+    unsigned long   tbuf0_rba0;
+    unsigned long   tbuf0_crc;
+    unsigned short  tbuf0_bcnt;
+    union {
+        unsigned char b[6];
+        struct {
+            unsigned short high;
+            unsigned short middl;
+            unsigned short low;
+        } w;
+    } paddr;
+    unsigned short  p_per;          /* persistence */
+    unsigned short  rfbd_ptr;       /* rx first bd pointer */
+    unsigned short  tfbd_ptr;       /* tx first bd pointer */
+    unsigned short  tlbd_ptr;       /* tx last bd pointer */
+    unsigned long   tbuf1_data0;    /* save area 0 - next frame */
+    unsigned long   tbuf1_data1;    /* save area 1 - next frame */
+    unsigned long   tbuf1_rba0;
+    unsigned long   tbuf1_crc;
+    unsigned short  tbuf1_bcnt;
+    unsigned short  tx_len;         /* tx frame length counter */
+    unsigned short  iaddr1;         /* individual address filter 1*/
+    unsigned short  iaddr2;         /* individual address filter 2*/
+    unsigned short  iaddr3;         /* individual address filter 3*/
+    unsigned short  iaddr4;         /* individual address filter 4*/
+    unsigned short  boff_cnt;       /* back-off counter */
+    unsigned short  taddr_h;        /* temp address (MSB) */
+    unsigned short  taddr_m;        /* temp address */
+    unsigned short  taddr_l;        /* temp address (LSB) */
+};
+
+struct transparent_pram {
+    /*
+     * SCC parameter RAM
+     */
+    unsigned short  rbase;          /* RX BD base address */
+    unsigned short  tbase;          /* TX BD base address */
+    unsigned char   rfcr;           /* Rx function code */
+    unsigned char   tfcr;           /* Tx function code */
+    unsigned short  mrblr;          /* Rx buffer length */
+    unsigned long   rstate;         /* Rx internal state */
+    unsigned long   rptr;           /* Rx internal data pointer */
+    unsigned short  rbptr;          /* rb BD Pointer */
+    unsigned short  rcount;         /* Rx internal byte count */
+    unsigned long   rtemp;          /* Rx temp */
+    unsigned long   tstate;         /* Tx internal state */
+    unsigned long   tptr;           /* Tx internal data pointer */
+    unsigned short  tbptr;          /* Tx BD pointer */
+    unsigned short  tcount;         /* Tx byte count */
+    unsigned long   ttemp;          /* Tx temp */
+    unsigned long   rcrc;           /* temp receive CRC */
+    unsigned long   tcrc;           /* temp transmit CRC */
+   
+    /*
+     * TRANSPARENT specific parameter RAM
+     */
+    unsigned long   crc_p;          /* CRC Preset */
+    unsigned long   crc_c;          /* CRC constant */
+};
+
+struct timer_pram {
+    /*
+     * RISC timers parameter RAM
+     */
+    unsigned short  tm_base;        /* RISC timer table base adr */
+    unsigned short  tm_ptr;         /* RISC timer table pointer */
+    unsigned short  r_tmr;          /* RISC timer mode register */
+    unsigned short  r_tmv;          /* RISC timer valid register */
+    unsigned long   tm_cmd;         /* RISC timer cmd register */
+    unsigned long   tm_cnt;         /* RISC timer internal cnt */
+};
+
+#endif
diff --git a/arch/m68knommu/include/asm/m68360_quicc.h b/arch/m68knommu/include/asm/m68360_quicc.h
new file mode 100644
index 00000000000..6d40f4d18e1
--- /dev/null
+++ b/arch/m68knommu/include/asm/m68360_quicc.h
@@ -0,0 +1,362 @@
+/***********************************
+ * $Id: m68360_quicc.h,v 1.1 2002/03/02 15:01:07 gerg Exp $
+ ***********************************
+ *
+ ***************************************
+ * Definitions of QUICC memory structures
+ ***************************************
+ */
+
+#ifndef __M68360_QUICC_H
+#define __M68360_QUICC_H
+
+/*
+ * include registers and
+ * parameter ram definitions files
+ */
+#include <asm/m68360_regs.h>
+#include <asm/m68360_pram.h>
+
+
+
+/* Buffer Descriptors */
+typedef struct quicc_bd {
+    volatile unsigned short     status;
+    volatile unsigned short     length;
+    volatile unsigned char      *buf;     /* WARNING: This is only true if *char is 32 bits */
+} QUICC_BD;
+
+
+#ifdef MOTOROLA_ORIGINAL
+struct user_data {
+    /* BASE + 0x000: user data memory */
+    volatile unsigned char      udata_bd_ucode[0x400]; /*user data bd's Ucode*/
+    volatile unsigned char      udata_bd[0x200];       /*user data Ucode     */
+    volatile unsigned char      ucode_ext[0x100];      /*Ucode Extention ram */
+    volatile unsigned char      RESERVED1[0x500];      /* Reserved area      */
+};
+#else
+struct user_data {
+    /* BASE + 0x000: user data memory */
+    volatile unsigned char      udata_bd_ucode[0x400]; /* user data, bds, Ucode*/
+    volatile unsigned char      udata_bd1[0x200];       /* user, bds */
+    volatile unsigned char      ucode_bd_scratch[0x100]; /* user, bds, ucode scratch */
+    volatile unsigned char      udata_bd2[0x100];       /* user, bds */
+    volatile unsigned char      RESERVED1[0x400];      /* Reserved area      */
+};
+#endif
+
+
+/*
+ * internal ram
+ */
+typedef struct quicc {
+	union {
+		struct quicc32_pram ch_pram_tbl[32];	/* 32*64(bytes) per channel */	
+		struct user_data		u;
+	}ch_or_u;	/* multipul or user space */
+
+    /* BASE + 0xc00: PARAMETER RAM */
+	union {
+		struct scc_pram {
+			union {
+				struct hdlc_pram        h;
+				struct uart_pram        u;
+				struct bisync_pram      b;
+				struct transparent_pram t;
+				unsigned char   RESERVED66[0x70];
+			} pscc;               /* scc parameter area (protocol dependent) */
+			union {
+				struct {
+					unsigned char       RESERVED70[0x10];
+					struct spi_pram     spi;
+					unsigned char       RESERVED72[0x8];
+					struct timer_pram   timer;
+				} timer_spi;
+				struct {
+					struct idma_pram idma;
+					unsigned char       RESERVED67[0x4];
+					union {
+						struct smc_uart_pram u;
+						struct smc_trnsp_pram t;
+					} psmc;
+				} idma_smc;
+			} pothers;
+		} scc;
+		struct ethernet_pram    enet_scc;
+		struct global_multi_pram        m;
+		unsigned char   pr[0x100];
+	} pram[4];
+
+    /* reserved */
+
+    /* BASE + 0x1000: INTERNAL REGISTERS */
+    /* SIM */
+    volatile unsigned long      sim_mcr;        /* module configuration reg */
+    volatile unsigned short     sim_simtr;      /* module test register     */
+    volatile unsigned char      RESERVED2[0x2]; /* Reserved area            */
+    volatile unsigned char      sim_avr;        /* auto vector reg          */
+    volatile unsigned char      sim_rsr;        /* reset status reg         */
+    volatile unsigned char      RESERVED3[0x2]; /* Reserved area            */
+    volatile unsigned char      sim_clkocr;     /* CLCO control register    */
+    volatile unsigned char      RESERVED62[0x3];        /* Reserved area    */
+    volatile unsigned short     sim_pllcr;      /* PLL control register     */
+    volatile unsigned char      RESERVED63[0x2];        /* Reserved area    */
+    volatile unsigned short     sim_cdvcr;      /* Clock devider control register */
+    volatile unsigned short     sim_pepar;      /* Port E pin assignment register */
+    volatile unsigned char      RESERVED64[0xa];        /* Reserved area    */
+    volatile unsigned char      sim_sypcr;      /* system protection control*/
+    volatile unsigned char      sim_swiv;       /* software interrupt vector*/
+    volatile unsigned char      RESERVED6[0x2]; /* Reserved area            */
+    volatile unsigned short     sim_picr;       /* periodic interrupt control reg */
+    volatile unsigned char      RESERVED7[0x2]; /* Reserved area            */
+    volatile unsigned short     sim_pitr;       /* periodic interrupt timing reg */
+    volatile unsigned char      RESERVED8[0x3]; /* Reserved area            */
+    volatile unsigned char      sim_swsr;       /* software service         */
+    volatile unsigned long      sim_bkar;       /* breakpoint address register*/
+    volatile unsigned long      sim_bkcr;       /* breakpoint control register*/
+    volatile unsigned char      RESERVED10[0x8];        /* Reserved area    */
+    /* MEMC */
+    volatile unsigned long      memc_gmr;       /* Global memory register   */
+    volatile unsigned short     memc_mstat;     /* MEMC status register     */
+    volatile unsigned char      RESERVED11[0xa];        /* Reserved area    */
+    volatile unsigned long      memc_br0;       /* base register 0          */
+    volatile unsigned long      memc_or0;       /* option register 0        */
+    volatile unsigned char      RESERVED12[0x8];        /* Reserved area    */
+    volatile unsigned long      memc_br1;       /* base register 1          */
+    volatile unsigned long      memc_or1;       /* option register 1        */
+    volatile unsigned char      RESERVED13[0x8];        /* Reserved area    */
+    volatile unsigned long      memc_br2;       /* base register 2          */
+    volatile unsigned long      memc_or2;       /* option register 2        */
+    volatile unsigned char      RESERVED14[0x8];        /* Reserved area    */
+    volatile unsigned long      memc_br3;       /* base register 3          */
+    volatile unsigned long      memc_or3;       /* option register 3        */
+    volatile unsigned char      RESERVED15[0x8];        /* Reserved area    */
+    volatile unsigned long      memc_br4;       /* base register 3          */
+    volatile unsigned long      memc_or4;       /* option register 3        */
+    volatile unsigned char      RESERVED16[0x8];        /* Reserved area    */
+    volatile unsigned long      memc_br5;       /* base register 3          */
+    volatile unsigned long      memc_or5;       /* option register 3        */
+    volatile unsigned char      RESERVED17[0x8];        /* Reserved area    */
+    volatile unsigned long      memc_br6;       /* base register 3          */
+    volatile unsigned long      memc_or6;       /* option register 3        */
+    volatile unsigned char      RESERVED18[0x8];        /* Reserved area    */
+    volatile unsigned long      memc_br7;       /* base register 3          */
+    volatile unsigned long      memc_or7;       /* option register 3        */
+    volatile unsigned char      RESERVED9[0x28];        /* Reserved area    */
+    /* TEST */
+    volatile unsigned short     test_tstmra;    /* master shift a           */
+    volatile unsigned short     test_tstmrb;    /* master shift b           */
+    volatile unsigned short     test_tstsc;     /* shift count              */
+    volatile unsigned short     test_tstrc;     /* repetition counter       */
+    volatile unsigned short     test_creg;      /* control                  */
+    volatile unsigned short     test_dreg;      /* destributed register     */
+    volatile unsigned char      RESERVED58[0x404];      /* Reserved area    */
+    /* IDMA1 */
+    volatile unsigned short     idma_iccr;      /* channel configuration reg*/
+    volatile unsigned char      RESERVED19[0x2];        /* Reserved area    */
+    volatile unsigned short     idma1_cmr;      /* dma mode reg             */
+    volatile unsigned char      RESERVED68[0x2];        /* Reserved area    */
+    volatile unsigned long      idma1_sapr;     /* dma source addr ptr      */
+    volatile unsigned long      idma1_dapr;     /* dma destination addr ptr */
+    volatile unsigned long      idma1_bcr;      /* dma byte count reg       */
+    volatile unsigned char      idma1_fcr;      /* function code reg        */
+    volatile unsigned char      RESERVED20;     /* Reserved area            */
+    volatile unsigned char      idma1_cmar;     /* channel mask reg         */
+    volatile unsigned char      RESERVED21;     /* Reserved area            */
+    volatile unsigned char      idma1_csr;      /* channel status reg       */
+    volatile unsigned char      RESERVED22[0x3];        /* Reserved area    */
+    /* SDMA */
+    volatile unsigned char      sdma_sdsr;      /* status reg               */
+    volatile unsigned char      RESERVED23;     /* Reserved area            */
+    volatile unsigned short     sdma_sdcr;      /* configuration reg        */
+    volatile unsigned long      sdma_sdar;      /* address reg              */
+    /* IDMA2 */
+    volatile unsigned char      RESERVED69[0x2];        /* Reserved area    */
+    volatile unsigned short     idma2_cmr;      /* dma mode reg             */
+    volatile unsigned long      idma2_sapr;     /* dma source addr ptr      */
+    volatile unsigned long      idma2_dapr;     /* dma destination addr ptr */
+    volatile unsigned long      idma2_bcr;      /* dma byte count reg       */
+    volatile unsigned char      idma2_fcr;      /* function code reg        */
+    volatile unsigned char      RESERVED24;     /* Reserved area            */
+    volatile unsigned char      idma2_cmar;     /* channel mask reg         */
+    volatile unsigned char      RESERVED25;     /* Reserved area            */
+    volatile unsigned char      idma2_csr;      /* channel status reg       */
+    volatile unsigned char      RESERVED26[0x7];        /* Reserved area    */
+    /* Interrupt Controller */
+    volatile unsigned long      intr_cicr;      /* CP interrupt configuration reg*/
+    volatile unsigned long      intr_cipr;      /* CP interrupt pending reg */
+    volatile unsigned long      intr_cimr;      /* CP interrupt mask reg    */
+    volatile unsigned long      intr_cisr;      /* CP interrupt in service reg*/
+    /* Parallel I/O */
+    volatile unsigned short     pio_padir;      /* port A data direction reg */
+    volatile unsigned short     pio_papar;      /* port A pin assignment reg */
+    volatile unsigned short     pio_paodr;      /* port A open drain reg    */
+    volatile unsigned short     pio_padat;      /* port A data register     */
+    volatile unsigned char      RESERVED28[0x8];        /* Reserved area    */
+    volatile unsigned short     pio_pcdir;      /* port C data direction reg*/
+    volatile unsigned short     pio_pcpar;      /* port C pin assignment reg*/
+    volatile unsigned short     pio_pcso;       /* port C special options   */
+    volatile unsigned short     pio_pcdat;      /* port C data register     */
+    volatile unsigned short     pio_pcint;      /* port C interrupt cntrl reg */
+    volatile unsigned char      RESERVED29[0x16];       /* Reserved area    */
+    /* Timer */
+    volatile unsigned short     timer_tgcr;     /* timer global configuration reg */
+    volatile unsigned char      RESERVED30[0xe];        /* Reserved area    */
+    volatile unsigned short     timer_tmr1;     /* timer 1 mode reg         */
+    volatile unsigned short     timer_tmr2;     /* timer 2 mode reg         */
+    volatile unsigned short     timer_trr1;     /* timer 1 referance reg    */
+    volatile unsigned short     timer_trr2;     /* timer 2 referance reg    */
+    volatile unsigned short     timer_tcr1;     /* timer 1 capture reg      */
+    volatile unsigned short     timer_tcr2;     /* timer 2 capture reg      */
+    volatile unsigned short     timer_tcn1;     /* timer 1 counter reg      */
+    volatile unsigned short     timer_tcn2;     /* timer 2 counter reg      */
+    volatile unsigned short     timer_tmr3;     /* timer 3 mode reg         */
+    volatile unsigned short     timer_tmr4;     /* timer 4 mode reg         */
+    volatile unsigned short     timer_trr3;     /* timer 3 referance reg    */
+    volatile unsigned short     timer_trr4;     /* timer 4 referance reg    */
+    volatile unsigned short     timer_tcr3;     /* timer 3 capture reg      */
+    volatile unsigned short     timer_tcr4;     /* timer 4 capture reg      */
+    volatile unsigned short     timer_tcn3;     /* timer 3 counter reg      */
+    volatile unsigned short     timer_tcn4;     /* timer 4 counter reg      */
+    volatile unsigned short     timer_ter1;     /* timer 1 event reg        */
+    volatile unsigned short     timer_ter2;     /* timer 2 event reg        */
+    volatile unsigned short     timer_ter3;     /* timer 3 event reg        */
+    volatile unsigned short     timer_ter4;     /* timer 4 event reg        */
+    volatile unsigned char      RESERVED34[0x8];        /* Reserved area    */
+    /* CP */
+    volatile unsigned short     cp_cr;          /* command register         */
+    volatile unsigned char      RESERVED35[0x2];        /* Reserved area    */
+    volatile unsigned short     cp_rccr;        /* main configuration reg   */
+    volatile unsigned char      RESERVED37;     /* Reserved area            */
+    volatile unsigned char      cp_rmds;        /* development support status reg */
+    volatile unsigned long      cp_rmdr;        /* development support control reg */
+    volatile unsigned short     cp_rctr1;       /* ram break register 1     */
+    volatile unsigned short     cp_rctr2;       /* ram break register 2     */
+    volatile unsigned short     cp_rctr3;       /* ram break register 3     */
+    volatile unsigned short     cp_rctr4;       /* ram break register 4     */
+    volatile unsigned char      RESERVED59[0x2];        /* Reserved area    */
+    volatile unsigned short     cp_rter;        /* RISC timers event reg    */
+    volatile unsigned char      RESERVED38[0x2];        /* Reserved area    */
+    volatile unsigned short     cp_rtmr;        /* RISC timers mask reg     */
+    volatile unsigned char      RESERVED39[0x14];       /* Reserved area    */
+    /* BRG */
+    union {
+        volatile unsigned long l;
+        struct {
+            volatile unsigned short BRGC_RESERV:14;
+            volatile unsigned short rst:1;
+            volatile unsigned short en:1;
+            volatile unsigned short extc:2;
+            volatile unsigned short atb:1;
+            volatile unsigned short cd:12;
+            volatile unsigned short div16:1;
+        } b;
+    } brgc[4];                                  /* BRG1-BRG4 configuration regs*/
+    /* SCC registers */
+    struct scc_regs {
+        union {
+            struct {
+                /* Low word. */
+                volatile unsigned short GSMR_RESERV2:1;
+                volatile unsigned short edge:2;
+                volatile unsigned short tci:1;
+                volatile unsigned short tsnc:2;
+                volatile unsigned short rinv:1;
+                volatile unsigned short tinv:1;
+                volatile unsigned short tpl:3;
+                volatile unsigned short tpp:2;
+                volatile unsigned short tend:1;
+                volatile unsigned short tdcr:2;
+                volatile unsigned short rdcr:2;
+                volatile unsigned short renc:3;
+                volatile unsigned short tenc:3;
+                volatile unsigned short diag:2;
+                volatile unsigned short enr:1;
+                volatile unsigned short ent:1;
+                volatile unsigned short mode:4;
+                /* High word. */
+                volatile unsigned short GSMR_RESERV1:14;
+                volatile unsigned short pri:1;
+                volatile unsigned short gde:1;
+                volatile unsigned short tcrc:2;
+                volatile unsigned short revd:1;
+                volatile unsigned short trx:1;
+                volatile unsigned short ttx:1;
+                volatile unsigned short cdp:1;
+                volatile unsigned short ctsp:1;
+                volatile unsigned short cds:1;
+                volatile unsigned short ctss:1;
+                volatile unsigned short tfl:1;
+                volatile unsigned short rfw:1;
+                volatile unsigned short txsy:1;
+                volatile unsigned short synl:2;
+                volatile unsigned short rtsm:1;
+                volatile unsigned short rsyn:1;
+            } b;
+            struct {
+                volatile unsigned long low;
+                volatile unsigned long high;
+            } w;
+        } scc_gsmr;                         /* SCC general mode reg         */
+        volatile unsigned short scc_psmr;   /* protocol specific mode reg   */
+        volatile unsigned char  RESERVED42[0x2]; /* Reserved area           */
+        volatile unsigned short scc_todr; /* SCC transmit on demand         */
+        volatile unsigned short scc_dsr;        /* SCC data sync reg        */
+        volatile unsigned short scc_scce;       /* SCC event reg            */
+        volatile unsigned char  RESERVED43[0x2];/* Reserved area            */
+        volatile unsigned short scc_sccm;       /* SCC mask reg             */
+        volatile unsigned char  RESERVED44[0x1];/* Reserved area            */
+        volatile unsigned char  scc_sccs;       /* SCC status reg           */
+        volatile unsigned char  RESERVED45[0x8]; /* Reserved area           */
+    } scc_regs[4];
+    /* SMC */
+    struct smc_regs {
+        volatile unsigned char  RESERVED46[0x2]; /* Reserved area           */
+        volatile unsigned short smc_smcmr;       /* SMC mode reg            */
+        volatile unsigned char  RESERVED60[0x2]; /* Reserved area           */
+        volatile unsigned char  smc_smce;        /* SMC event reg           */
+        volatile unsigned char  RESERVED47[0x3]; /* Reserved area           */
+        volatile unsigned char  smc_smcm;        /* SMC mask reg            */
+        volatile unsigned char  RESERVED48[0x5]; /* Reserved area           */
+    } smc_regs[2];
+    /* SPI */
+    volatile unsigned short     spi_spmode;     /* SPI mode reg             */
+    volatile unsigned char      RESERVED51[0x4];        /* Reserved area    */
+    volatile unsigned char      spi_spie;       /* SPI event reg            */
+    volatile unsigned char      RESERVED52[0x3];        /* Reserved area    */
+    volatile unsigned char      spi_spim;       /* SPI mask reg             */
+    volatile unsigned char      RESERVED53[0x2];        /* Reserved area    */
+    volatile unsigned char      spi_spcom;      /* SPI command reg          */
+    volatile unsigned char      RESERVED54[0x4];        /* Reserved area    */
+    /* PIP */
+    volatile unsigned short     pip_pipc;       /* pip configuration reg    */
+    volatile unsigned char      RESERVED65[0x2];        /* Reserved area    */
+    volatile unsigned short     pip_ptpr;       /* pip timing parameters reg */
+    volatile unsigned long      pip_pbdir;      /* port b data direction reg */
+    volatile unsigned long      pip_pbpar;      /* port b pin assignment reg */
+    volatile unsigned long      pip_pbodr;      /* port b open drain reg    */
+    volatile unsigned long      pip_pbdat;      /* port b data reg          */
+    volatile unsigned char      RESERVED71[0x18];       /* Reserved area    */
+    /* Serial Interface */
+    volatile unsigned long      si_simode;      /* SI mode register         */
+    volatile unsigned char      si_sigmr;       /* SI global mode register  */
+    volatile unsigned char      RESERVED55;     /* Reserved area            */
+    volatile unsigned char      si_sistr;       /* SI status register       */
+    volatile unsigned char      si_sicmr;       /* SI command register      */
+    volatile unsigned char      RESERVED56[0x4]; /* Reserved area           */
+    volatile unsigned long      si_sicr;        /* SI clock routing         */
+    volatile unsigned long      si_sirp;        /* SI ram pointers          */
+    volatile unsigned char      RESERVED57[0xc]; /* Reserved area           */
+    volatile unsigned short     si_siram[0x80]; /* SI routing ram          */
+} QUICC;
+
+#endif
+
+/*
+ * Local variables:
+ *  c-indent-level: 4
+ *  c-basic-offset: 4
+ *  tab-width: 4
+ * End:
+ */
diff --git a/arch/m68knommu/include/asm/m68360_regs.h b/arch/m68knommu/include/asm/m68360_regs.h
new file mode 100644
index 00000000000..d57217ca4f2
--- /dev/null
+++ b/arch/m68knommu/include/asm/m68360_regs.h
@@ -0,0 +1,408 @@
+/***********************************
+ * $Id: m68360_regs.h,v 1.2 2002/10/26 15:03:55 gerg Exp $
+ ***********************************
+ *
+ ***************************************
+ * Definitions of the QUICC registers
+ ***************************************
+ */
+
+#ifndef __REGISTERS_H
+#define __REGISTERS_H
+
+#define CLEAR_BIT(x, bit)  x =bit 
+
+/*****************************************************************
+        Command Register
+*****************************************************************/
+
+/* bit fields within command register */
+#define SOFTWARE_RESET  0x8000
+#define CMD_OPCODE      0x0f00
+#define CMD_CHANNEL     0x00f0
+#define CMD_FLAG        0x0001
+
+/* general command opcodes */
+#define INIT_RXTX_PARAMS        0x0000
+#define INIT_RX_PARAMS          0x0100
+#define INIT_TX_PARAMS          0x0200
+#define ENTER_HUNT_MODE         0x0300
+#define STOP_TX                 0x0400
+#define GR_STOP_TX              0x0500
+#define RESTART_TX              0x0600
+#define CLOSE_RX_BD             0x0700
+#define SET_ENET_GROUP          0x0800
+#define RESET_ENET_GROUP        0x0900
+
+/* quicc32 CP commands */
+#define STOP_TX_32		0x0e00	/*add chan# bits 2-6 */
+#define ENTER_HUNT_MODE_32	0x1e00
+
+/* quicc32 mask/event SCC register */
+#define GOV	0x01
+#define GUN	0x02
+#define GINT	0x04
+#define IQOV	0x08
+
+
+/* Timer commands */
+#define SET_TIMER               0x0800
+
+/* Multi channel Interrupt structure */
+#define INTR_VALID	0x8000	/* Valid interrupt entry */
+#define INTR_WRAP	0x4000	/* Wrap bit in the interrupt entry table */
+#define INTR_CH_NU	0x07c0	/* Channel Num in interrupt table */
+#define INTR_MASK_BITS	0x383f
+
+/*
+ * General SCC mode register (GSMR)
+ */
+
+#define MODE_HDLC               0x0
+#define MODE_APPLE_TALK         0x2
+#define MODE_SS7                0x3
+#define MODE_UART               0x4
+#define MODE_PROFIBUS           0x5
+#define MODE_ASYNC_HDLC         0x6
+#define MODE_V14                0x7
+#define MODE_BISYNC             0x8
+#define MODE_DDCMP              0x9
+#define MODE_MULTI_CHANNEL      0xa
+#define MODE_ETHERNET           0xc
+
+#define DIAG_NORMAL             0x0
+#define DIAG_LOCAL_LPB          0x1
+#define DIAG_AUTO_ECHO          0x2
+#define DIAG_LBP_ECHO           0x3
+
+/* For RENC and TENC fields in GSMR */
+#define ENC_NRZ                 0x0
+#define ENC_NRZI                0x1
+#define ENC_FM0                 0x2
+#define ENC_MANCH               0x4
+#define ENC_DIFF_MANC           0x6
+
+/* For TDCR and RDCR fields in GSMR */
+#define CLOCK_RATE_1            0x0
+#define CLOCK_RATE_8            0x1
+#define CLOCK_RATE_16           0x2
+#define CLOCK_RATE_32           0x3
+
+#define TPP_00                  0x0
+#define TPP_10                  0x1
+#define TPP_01                  0x2
+#define TPP_11                  0x3
+
+#define TPL_NO                  0x0
+#define TPL_8                   0x1
+#define TPL_16                  0x2
+#define TPL_32                  0x3
+#define TPL_48                  0x4
+#define TPL_64                  0x5
+#define TPL_128                 0x6
+
+#define TSNC_INFINITE           0x0
+#define TSNC_14_65              0x1
+#define TSNC_4_15               0x2
+#define TSNC_3_1                0x3
+
+#define EDGE_BOTH               0x0
+#define EDGE_POS                0x1
+#define EDGE_NEG                0x2
+#define EDGE_NO                 0x3
+
+#define SYNL_NO                 0x0
+#define SYNL_4                  0x1
+#define SYNL_8                  0x2
+#define SYNL_16                 0x3
+
+#define TCRC_CCITT16            0x0
+#define TCRC_CRC16              0x1
+#define TCRC_CCITT32            0x2
+
+
+/*****************************************************************
+        TODR (Transmit on demand) Register
+*****************************************************************/
+#define TODR_TOD        0x8000  /* Transmit on demand */
+
+
+/*****************************************************************
+        CICR register settings
+*****************************************************************/
+
+/* note that relative irq priorities of the SCCs can be reordered
+ * if desired - see p. 7-377 of the MC68360UM */
+#define CICR_SCA_SCC1           ((uint)0x00000000)      /* SCC1 @ SCCa */
+#define CICR_SCB_SCC2           ((uint)0x00040000)      /* SCC2 @ SCCb */
+#define CICR_SCC_SCC3           ((uint)0x00200000)      /* SCC3 @ SCCc */
+#define CICR_SCD_SCC4           ((uint)0x00c00000)      /* SCC4 @ SCCd */
+
+#define CICR_IRL_MASK           ((uint)0x0000e000)      /* Core interrupt */
+#define CICR_HP_MASK            ((uint)0x00001f00)      /* Hi-pri int. */
+#define CICR_VBA_MASK           ((uint)0x000000e0)      /* Vector Base Address */
+#define CICR_SPS                ((uint)0x00000001)      /* SCC Spread */
+
+
+/*****************************************************************
+       Interrupt bits for CIPR and CIMR (MC68360UM p. 7-379)
+*****************************************************************/
+
+#define INTR_PIO_PC0    0x80000000      /* parallel I/O C bit 0 */
+#define INTR_SCC1       0x40000000      /* SCC port 1 */
+#define INTR_SCC2       0x20000000      /* SCC port 2 */
+#define INTR_SCC3       0x10000000      /* SCC port 3 */
+#define INTR_SCC4       0x08000000      /* SCC port 4 */
+#define INTR_PIO_PC1    0x04000000      /* parallel i/o C bit 1 */
+#define INTR_TIMER1     0x02000000      /* timer 1 */
+#define INTR_PIO_PC2    0x01000000      /* parallel i/o C bit 2 */
+#define INTR_PIO_PC3    0x00800000      /* parallel i/o C bit 3 */
+#define INTR_SDMA_BERR  0x00400000      /* SDMA channel bus error */
+#define INTR_DMA1       0x00200000      /* idma 1 */
+#define INTR_DMA2       0x00100000      /* idma 2 */
+#define INTR_TIMER2     0x00040000      /* timer 2 */
+#define INTR_CP_TIMER   0x00020000      /* CP timer */
+#define INTR_PIP_STATUS 0x00010000      /* PIP status */
+#define INTR_PIO_PC4    0x00008000      /* parallel i/o C bit 4 */
+#define INTR_PIO_PC5    0x00004000      /* parallel i/o C bit 5 */
+#define INTR_TIMER3     0x00001000      /* timer 3 */
+#define INTR_PIO_PC6    0x00000800      /* parallel i/o C bit 6 */
+#define INTR_PIO_PC7    0x00000400      /* parallel i/o C bit 7 */
+#define INTR_PIO_PC8    0x00000200      /* parallel i/o C bit 8 */
+#define INTR_TIMER4     0x00000080      /* timer 4 */
+#define INTR_PIO_PC9    0x00000040      /* parallel i/o C bit 9 */
+#define INTR_SCP        0x00000020      /* SCP */
+#define INTR_SMC1       0x00000010      /* SMC 1 */
+#define INTR_SMC2       0x00000008      /* SMC 2 */
+#define INTR_PIO_PC10   0x00000004      /* parallel i/o C bit 10 */
+#define INTR_PIO_PC11   0x00000002      /* parallel i/o C bit 11 */
+#define INTR_ERR        0x00000001      /* error */
+
+
+/*****************************************************************
+        CPM Interrupt vector encodings (MC68360UM p. 7-376)
+*****************************************************************/
+
+#define CPMVEC_NR		32
+#define CPMVEC_PIO_PC0		0x1f
+#define CPMVEC_SCC1		0x1e
+#define CPMVEC_SCC2		0x1d
+#define CPMVEC_SCC3		0x1c
+#define CPMVEC_SCC4		0x1b
+#define CPMVEC_PIO_PC1		0x1a
+#define CPMVEC_TIMER1		0x19
+#define CPMVEC_PIO_PC2		0x18
+#define CPMVEC_PIO_PC3		0x17
+#define CPMVEC_SDMA_CB_ERR	0x16
+#define CPMVEC_IDMA1		0x15
+#define CPMVEC_IDMA2		0x14
+#define CPMVEC_RESERVED3	0x13
+#define CPMVEC_TIMER2		0x12
+#define CPMVEC_RISCTIMER	0x11
+#define CPMVEC_RESERVED2	0x10
+#define CPMVEC_PIO_PC4		0x0f
+#define CPMVEC_PIO_PC5		0x0e
+#define CPMVEC_TIMER3		0x0c
+#define CPMVEC_PIO_PC6		0x0b
+#define CPMVEC_PIO_PC7		0x0a
+#define CPMVEC_PIO_PC8		0x09
+#define CPMVEC_RESERVED1	0x08
+#define CPMVEC_TIMER4		0x07
+#define CPMVEC_PIO_PC9		0x06
+#define CPMVEC_SPI		0x05
+#define CPMVEC_SMC1		0x04
+#define CPMVEC_SMC2		0x03
+#define CPMVEC_PIO_PC10		0x02
+#define CPMVEC_PIO_PC11		0x01
+#define CPMVEC_ERROR		0x00
+
+/* #define CPMVEC_PIO_PC0		((ushort)0x1f) */
+/* #define CPMVEC_SCC1		((ushort)0x1e) */
+/* #define CPMVEC_SCC2		((ushort)0x1d) */
+/* #define CPMVEC_SCC3		((ushort)0x1c) */
+/* #define CPMVEC_SCC4		((ushort)0x1b) */
+/* #define CPMVEC_PIO_PC1		((ushort)0x1a) */
+/* #define CPMVEC_TIMER1		((ushort)0x19) */
+/* #define CPMVEC_PIO_PC2		((ushort)0x18) */
+/* #define CPMVEC_PIO_PC3		((ushort)0x17) */
+/* #define CPMVEC_SDMA_CB_ERR	((ushort)0x16) */
+/* #define CPMVEC_IDMA1		((ushort)0x15) */
+/* #define CPMVEC_IDMA2		((ushort)0x14) */
+/* #define CPMVEC_RESERVED3	((ushort)0x13) */
+/* #define CPMVEC_TIMER2		((ushort)0x12) */
+/* #define CPMVEC_RISCTIMER	((ushort)0x11) */
+/* #define CPMVEC_RESERVED2	((ushort)0x10) */
+/* #define CPMVEC_PIO_PC4		((ushort)0x0f) */
+/* #define CPMVEC_PIO_PC5		((ushort)0x0e) */
+/* #define CPMVEC_TIMER3		((ushort)0x0c) */
+/* #define CPMVEC_PIO_PC6		((ushort)0x0b) */
+/* #define CPMVEC_PIO_PC7		((ushort)0x0a) */
+/* #define CPMVEC_PIO_PC8		((ushort)0x09) */
+/* #define CPMVEC_RESERVED1	((ushort)0x08) */
+/* #define CPMVEC_TIMER4		((ushort)0x07) */
+/* #define CPMVEC_PIO_PC9		((ushort)0x06) */
+/* #define CPMVEC_SPI		((ushort)0x05) */
+/* #define CPMVEC_SMC1		((ushort)0x04) */
+/* #define CPMVEC_SMC2		((ushort)0x03) */
+/* #define CPMVEC_PIO_PC10		((ushort)0x02) */
+/* #define CPMVEC_PIO_PC11		((ushort)0x01) */
+/* #define CPMVEC_ERROR		((ushort)0x00) */
+
+
+/*****************************************************************
+ *        PIO control registers
+ *****************************************************************/
+
+/* Port A - See 360UM p. 7-358
+ * 
+ *  Note that most of these pins have alternate functions
+ */
+
+
+/* The macros are nice, but there are all sorts of references to 1-indexed
+ * facilities on the 68360... */
+/* #define PA_RXD(n)	((ushort)(0x01<<(2*n))) */
+/* #define PA_TXD(n)	((ushort)(0x02<<(2*n))) */
+
+#define PA_RXD1		((ushort)0x0001)
+#define PA_TXD1		((ushort)0x0002)
+#define PA_RXD2		((ushort)0x0004)
+#define PA_TXD2		((ushort)0x0008)
+#define PA_RXD3		((ushort)0x0010)
+#define PA_TXD3		((ushort)0x0020)
+#define PA_RXD4		((ushort)0x0040)
+#define PA_TXD4		((ushort)0x0080)
+
+#define PA_CLK1		((ushort)0x0100)
+#define PA_CLK2		((ushort)0x0200)
+#define PA_CLK3		((ushort)0x0400)
+#define PA_CLK4		((ushort)0x0800)
+#define PA_CLK5		((ushort)0x1000)
+#define PA_CLK6		((ushort)0x2000)
+#define PA_CLK7		((ushort)0x4000)
+#define PA_CLK8		((ushort)0x8000)
+
+
+/* Port B - See 360UM p. 7-362
+ */
+
+
+/* Port C - See 360UM p. 7-365
+ */
+
+#define PC_RTS1		((ushort)0x0001)
+#define PC_RTS2		((ushort)0x0002)
+#define PC__RTS3	((ushort)0x0004) /* !RTS3 */
+#define PC__RTS4	((ushort)0x0008) /* !RTS4 */
+
+#define PC_CTS1		((ushort)0x0010)
+#define PC_CD1		((ushort)0x0020)
+#define PC_CTS2		((ushort)0x0040)
+#define PC_CD2		((ushort)0x0080)
+#define PC_CTS3		((ushort)0x0100)
+#define PC_CD3		((ushort)0x0200)
+#define PC_CTS4		((ushort)0x0400)
+#define PC_CD4		((ushort)0x0800)
+
+
+
+/*****************************************************************
+        chip select option register
+*****************************************************************/
+#define DTACK           0xe000
+#define ADR_MASK        0x1ffc
+#define RDWR_MASK       0x0002
+#define FC_MASK         0x0001
+
+/*****************************************************************
+        tbase and rbase registers
+*****************************************************************/
+#define TBD_ADDR(quicc,pram) ((struct quicc_bd *) \
+    (quicc->ch_or_u.u.udata_bd_ucode + pram->tbase))
+#define RBD_ADDR(quicc,pram) ((struct quicc_bd *) \
+    (quicc->ch_or_u.u.udata_bd_ucode + pram->rbase))
+#define TBD_CUR_ADDR(quicc,pram) ((struct quicc_bd *) \
+    (quicc->ch_or_u.u.udata_bd_ucode + pram->tbptr))
+#define RBD_CUR_ADDR(quicc,pram) ((struct quicc_bd *) \
+    (quicc->ch_or_u.u.udata_bd_ucode + pram->rbptr))
+#define TBD_SET_CUR_ADDR(bd,quicc,pram) pram->tbptr = \
+    ((unsigned short)((char *)(bd) - (char *)(quicc->ch_or_u.u.udata_bd_ucode)))
+#define RBD_SET_CUR_ADDR(bd,quicc,pram) pram->rbptr = \
+    ((unsigned short)((char *)(bd) - (char *)(quicc->ch_or_u.u.udata_bd_ucode)))
+#define INCREASE_TBD(bd,quicc,pram) {  \
+    if((bd)->status & T_W)             \
+        (bd) = TBD_ADDR(quicc,pram);   \
+    else                               \
+        (bd)++;                        \
+}
+#define DECREASE_TBD(bd,quicc,pram) {  \
+    if ((bd) == TBD_ADDR(quicc, pram)) \
+        while (!((bd)->status & T_W))  \
+            (bd)++;                    \
+    else                               \
+        (bd)--;                        \
+}
+#define INCREASE_RBD(bd,quicc,pram) {  \
+    if((bd)->status & R_W)             \
+        (bd) = RBD_ADDR(quicc,pram);   \
+    else                               \
+        (bd)++;                        \
+}
+#define DECREASE_RBD(bd,quicc,pram) {  \
+    if ((bd) == RBD_ADDR(quicc, pram)) \
+        while (!((bd)->status & T_W))  \
+            (bd)++;                    \
+    else                               \
+        (bd)--;                        \
+}
+
+/*****************************************************************
+        Macros for Multi channel
+*****************************************************************/
+#define QMC_BASE(quicc,page) (struct global_multi_pram *)(&quicc->pram[page])
+#define MCBASE(quicc,page) (unsigned long)(quicc->pram[page].m.mcbase)
+#define CHANNEL_PRAM_BASE(quicc,channel) ((struct quicc32_pram *) \
+		(&(quicc->ch_or_u.ch_pram_tbl[channel])))
+#define TBD_32_ADDR(quicc,page,channel) ((struct quicc_bd *) \
+    (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->tbase)))
+#define RBD_32_ADDR(quicc,page,channel) ((struct quicc_bd *) \
+    (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->rbase)))
+#define TBD_32_CUR_ADDR(quicc,page,channel) ((struct quicc_bd *) \
+    (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->tbptr)))
+#define RBD_32_CUR_ADDR(quicc,page,channel) ((struct quicc_bd *) \
+    (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->rbptr)))
+#define TBD_32_SET_CUR_ADDR(bd,quicc,page,channel) \
+     CHANNEL_PRAM_BASE(quicc,channel)->tbptr = \
+    ((unsigned short)((char *)(bd) - (char *)(MCBASE(quicc,page))))
+#define RBD_32_SET_CUR_ADDR(bd,quicc,page,channel) \
+     CHANNEL_PRAM_BASE(quicc,channel)->rbptr = \
+    ((unsigned short)((char *)(bd) - (char *)(MCBASE(quicc,page))))
+
+#define INCREASE_TBD_32(bd,quicc,page,channel) {  \
+    if((bd)->status & T_W)                        \
+        (bd) = TBD_32_ADDR(quicc,page,channel);   \
+    else                                          \
+        (bd)++;                                   \
+}
+#define DECREASE_TBD_32(bd,quicc,page,channel) {  \
+    if ((bd) == TBD_32_ADDR(quicc, page,channel)) \
+        while (!((bd)->status & T_W))             \
+            (bd)++;                               \
+    else                                          \
+        (bd)--;                                   \
+}
+#define INCREASE_RBD_32(bd,quicc,page,channel) {  \
+    if((bd)->status & R_W)                        \
+        (bd) = RBD_32_ADDR(quicc,page,channel);   \
+    else                                          \
+        (bd)++;                                   \
+}
+#define DECREASE_RBD_32(bd,quicc,page,channel) {  \
+    if ((bd) == RBD_32_ADDR(quicc, page,channel)) \
+        while (!((bd)->status & T_W))             \
+            (bd)++;                               \
+    else                                          \
+        (bd)--;                                   \
+}
+
+#endif
diff --git a/arch/m68knommu/include/asm/machdep.h b/arch/m68knommu/include/asm/machdep.h
new file mode 100644
index 00000000000..de9f47a51cc
--- /dev/null
+++ b/arch/m68knommu/include/asm/machdep.h
@@ -0,0 +1,26 @@
+#ifndef _M68KNOMMU_MACHDEP_H
+#define _M68KNOMMU_MACHDEP_H
+
+#include <linux/interrupt.h>
+
+/* Hardware clock functions */
+extern void hw_timer_init(void);
+extern unsigned long hw_timer_offset(void);
+
+extern irqreturn_t arch_timer_interrupt(int irq, void *dummy);
+
+/* Machine dependent time handling */
+extern void (*mach_gettod)(int *year, int *mon, int *day, int *hour,
+			   int *min, int *sec);
+extern int (*mach_set_clock_mmss)(unsigned long);
+
+/* machine dependent power off functions */
+extern void (*mach_reset)( void );
+extern void (*mach_halt)( void );
+extern void (*mach_power_off)( void );
+
+extern void config_BSP(char *command, int len);
+
+extern void do_IRQ(int irq, struct pt_regs *fp);
+
+#endif /* _M68KNOMMU_MACHDEP_H */
diff --git a/arch/m68knommu/include/asm/math-emu.h b/arch/m68knommu/include/asm/math-emu.h
new file mode 100644
index 00000000000..7e7090517b7
--- /dev/null
+++ b/arch/m68knommu/include/asm/math-emu.h
@@ -0,0 +1 @@
+#include <asm-m68k/math-emu.h>
diff --git a/arch/m68knommu/include/asm/mc146818rtc.h b/arch/m68knommu/include/asm/mc146818rtc.h
new file mode 100644
index 00000000000..907a0481a14
--- /dev/null
+++ b/arch/m68knommu/include/asm/mc146818rtc.h
@@ -0,0 +1,9 @@
+/*
+ * Machine dependent access functions for RTC registers.
+ */
+#ifndef _M68KNOMMU_MC146818RTC_H
+#define _M68KNOMMU_MC146818RTC_H
+
+/* empty include file to satisfy the include in genrtc.c/ide-geometry.c */
+
+#endif /* _M68KNOMMU_MC146818RTC_H */
diff --git a/arch/m68knommu/include/asm/mcfcache.h b/arch/m68knommu/include/asm/mcfcache.h
new file mode 100644
index 00000000000..c042634fada
--- /dev/null
+++ b/arch/m68knommu/include/asm/mcfcache.h
@@ -0,0 +1,150 @@
+/****************************************************************************/
+
+/*
+ *	mcfcache.h -- ColdFire CPU cache support code
+ *
+ *	(C) Copyright 2004, Greg Ungerer <gerg@snapgear.com>
+ */
+
+/****************************************************************************/
+#ifndef	__M68KNOMMU_MCFCACHE_H
+#define	__M68KNOMMU_MCFCACHE_H
+/****************************************************************************/
+
+
+/*
+ *	The different ColdFire families have different cache arrangments.
+ *	Everything from a small instruction only cache, to configurable
+ *	data and/or instruction cache, to unified instruction/data, to 
+ *	harvard style separate instruction and data caches.
+ */
+
+#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || defined(CONFIG_M5272)
+/*
+ *	Simple version 2 core cache. These have instruction cache only,
+ *	we just need to invalidate it and enable it.
+ */
+.macro CACHE_ENABLE
+	movel	#0x01000000,%d0		/* invalidate cache cmd */
+	movec	%d0,%CACR		/* do invalidate cache */
+	movel	#0x80000100,%d0		/* setup cache mask */
+	movec	%d0,%CACR		/* enable cache */
+.endm
+#endif /* CONFIG_M5206 || CONFIG_M5206e || CONFIG_M5272 */
+
+#if defined(CONFIG_M523x) || defined(CONFIG_M527x)
+/*
+ *	New version 2 cores have a configurable split cache arrangement.
+ *	For now I am just enabling instruction cache - but ultimately I
+ *	think a split instruction/data cache would be better.
+ */
+.macro CACHE_ENABLE
+	movel	#0x01400000,%d0
+	movec	%d0,%CACR		/* invalidate cache */
+	nop
+	movel	#0x0000c000,%d0		/* set SDRAM cached only */
+	movec	%d0,%ACR0
+	movel	#0x00000000,%d0		/* no other regions cached */
+	movec	%d0,%ACR1
+	movel	#0x80400100,%d0		/* configure cache */
+	movec	%d0,%CACR		/* enable cache */
+	nop
+.endm
+#endif /* CONFIG_M523x || CONFIG_M527x */
+
+#if defined(CONFIG_M528x)
+.macro CACHE_ENABLE
+	nop
+	movel	#0x01000000, %d0
+	movec	%d0, %CACR		/* Invalidate cache */
+	nop
+	movel	#0x0000c020, %d0	/* Set SDRAM cached only */
+	movec	%d0, %ACR0
+	movel	#0x00000000, %d0	/* No other regions cached */
+	movec	%d0, %ACR1
+	movel	#0x80000200, %d0	/* Setup cache mask */
+	movec	%d0, %CACR		/* Enable cache */
+	nop
+.endm
+#endif /* CONFIG_M528x */
+
+#if defined(CONFIG_M5249) || defined(CONFIG_M5307)
+/*
+ *	The version 3 core cache. Oddly enough the version 2 core 5249
+ *	has the same SDRAM and cache setup as the version 3 cores.
+ *	This is a single unified instruction/data cache.
+ */
+.macro CACHE_ENABLE
+	movel	#0x01000000,%d0		/* invalidate whole cache */
+	movec	%d0,%CACR
+	nop
+#if defined(DEBUGGER_COMPATIBLE_CACHE) || defined(CONFIG_SECUREEDGEMP3)
+	movel	#0x0000c000,%d0		/* set SDRAM cached (write-thru) */
+#else
+	movel	#0x0000c020,%d0		/* set SDRAM cached (copyback) */
+#endif
+	movec	%d0,%ACR0
+	movel	#0x00000000,%d0		/* no other regions cached */
+	movec	%d0,%ACR1
+	movel	#0xa0000200,%d0		/* enable cache */
+	movec	%d0,%CACR
+	nop
+.endm
+#endif /* CONFIG_M5249 || CONFIG_M5307 */
+
+#if defined(CONFIG_M532x)
+.macro CACHE_ENABLE
+	movel	#0x01000000,%d0		/* invalidate cache cmd */
+	movec	%d0,%CACR		/* do invalidate cache */
+	nop
+	movel	#0x4001C000,%d0		/* set SDRAM cached (write-thru) */
+	movec	%d0,%ACR0
+	movel	#0x00000000,%d0		/* no other regions cached */
+	movec	%d0,%ACR1
+	movel	#0x80000200,%d0		/* setup cache mask */
+	movec	%d0,%CACR		/* enable cache */
+	nop
+.endm
+#endif /* CONFIG_M532x */
+
+#if defined(CONFIG_M5407)
+/*
+ *	Version 4 cores have a true harvard style separate instruction
+ *	and data cache. Invalidate and enable cache, also enable write
+ *	buffers and branch accelerator.
+ */
+.macro CACHE_ENABLE
+	movel	#0x01040100,%d0		/* invalidate whole cache */
+	movec	%d0,%CACR
+	nop
+	movel	#0x000fc000,%d0		/* set SDRAM cached only */
+	movec	%d0, %ACR0
+	movel	#0x00000000,%d0		/* no other regions cached */
+	movec	%d0, %ACR1
+	movel	#0x000fc000,%d0		/* set SDRAM cached only */
+	movec	%d0, %ACR2
+	movel	#0x00000000,%d0		/* no other regions cached */
+	movec	%d0, %ACR3
+	movel	#0xb6088400,%d0		/* enable caches */
+	movec	%d0,%CACR
+	nop
+.endm
+#endif /* CONFIG_M5407 */
+
+#if defined(CONFIG_M520x)
+.macro CACHE_ENABLE
+	move.l	#0x01000000,%d0		/* invalidate whole cache */
+	movec	%d0,%CACR
+	nop
+	move.l	#0x0000c000,%d0		/* set SDRAM cached (write-thru) */
+	movec	%d0,%ACR0
+	move.l	#0x00000000,%d0		/* no other regions cached */
+	movec	%d0,%ACR1
+	move.l	#0x80400000,%d0		/* enable 8K instruction cache */
+	movec	%d0,%CACR
+	nop
+.endm
+#endif /* CONFIG_M520x */
+
+/****************************************************************************/
+#endif	/* __M68KNOMMU_MCFCACHE_H */
diff --git a/arch/m68knommu/include/asm/mcfdma.h b/arch/m68knommu/include/asm/mcfdma.h
new file mode 100644
index 00000000000..705c52c79cd
--- /dev/null
+++ b/arch/m68knommu/include/asm/mcfdma.h
@@ -0,0 +1,144 @@
+/****************************************************************************/
+
+/*
+ *	mcfdma.h -- Coldfire internal DMA support defines.
+ *
+ *	(C) Copyright 1999, Rob Scott (rscott@mtrob.ml.org)
+ */
+
+/****************************************************************************/
+#ifndef	mcfdma_h
+#define	mcfdma_h
+/****************************************************************************/
+
+
+/*
+ *	Get address specific defines for this Coldfire member.
+ */
+#if defined(CONFIG_M5206) || defined(CONFIG_M5206e)
+#define	MCFDMA_BASE0		0x200		/* Base address of DMA 0 */
+#define	MCFDMA_BASE1		0x240		/* Base address of DMA 1 */
+#elif defined(CONFIG_M5272)
+#define	MCFDMA_BASE0		0x0e0		/* Base address of DMA 0 */
+#elif defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
+/* These are relative to the IPSBAR, not MBAR */
+#define	MCFDMA_BASE0		0x100		/* Base address of DMA 0 */
+#define	MCFDMA_BASE1		0x140		/* Base address of DMA 1 */
+#define	MCFDMA_BASE2		0x180		/* Base address of DMA 2 */
+#define	MCFDMA_BASE3		0x1C0		/* Base address of DMA 3 */
+#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407)
+#define	MCFDMA_BASE0		0x300		/* Base address of DMA 0 */
+#define	MCFDMA_BASE1		0x340		/* Base address of DMA 1 */
+#define	MCFDMA_BASE2		0x380		/* Base address of DMA 2 */
+#define	MCFDMA_BASE3		0x3C0		/* Base address of DMA 3 */
+#endif
+
+
+#if !defined(CONFIG_M5272)
+
+/*
+ *	Define the DMA register set addresses.
+ *      Note: these are longword registers, use unsigned long as data type
+ */
+#define	MCFDMA_SAR		0x00		/* DMA source address (r/w) */
+#define	MCFDMA_DAR		0x01		/* DMA destination adr (r/w) */
+/* these are word registers, use unsigned short data type */
+#define	MCFDMA_DCR		0x04		/* DMA control reg (r/w) */
+#define	MCFDMA_BCR		0x06		/* DMA byte count reg (r/w) */
+/* these are byte registers, use unsiged char data type */
+#define	MCFDMA_DSR		0x10		/* DMA status reg (r/w) */
+#define	MCFDMA_DIVR		0x14		/* DMA interrupt vec (r/w) */
+
+/*
+ *	Bit definitions for the DMA Control Register (DCR).
+ */
+#define	MCFDMA_DCR_INT	        0x8000		/* Enable completion irq */
+#define	MCFDMA_DCR_EEXT	        0x4000		/* Enable external DMA req */
+#define	MCFDMA_DCR_CS 	        0x2000		/* Enable cycle steal */
+#define	MCFDMA_DCR_AA   	0x1000		/* Enable auto alignment */
+#define	MCFDMA_DCR_BWC_MASK  	0x0E00		/* Bandwidth ctl mask */
+#define MCFDMA_DCR_BWC_512      0x0200          /* Bandwidth:   512 Bytes */
+#define MCFDMA_DCR_BWC_1024     0x0400          /* Bandwidth:  1024 Bytes */
+#define MCFDMA_DCR_BWC_2048     0x0600          /* Bandwidth:  2048 Bytes */
+#define MCFDMA_DCR_BWC_4096     0x0800          /* Bandwidth:  4096 Bytes */
+#define MCFDMA_DCR_BWC_8192     0x0a00          /* Bandwidth:  8192 Bytes */
+#define MCFDMA_DCR_BWC_16384    0x0c00          /* Bandwidth: 16384 Bytes */
+#define MCFDMA_DCR_BWC_32768    0x0e00          /* Bandwidth: 32768 Bytes */
+#define	MCFDMA_DCR_SAA         	0x0100		/* Single Address Access */
+#define	MCFDMA_DCR_S_RW        	0x0080		/* SAA read/write value */
+#define	MCFDMA_DCR_SINC        	0x0040		/* Source addr inc enable */
+#define	MCFDMA_DCR_SSIZE_MASK  	0x0030		/* Src xfer size */
+#define	MCFDMA_DCR_SSIZE_LONG  	0x0000		/* Src xfer size, 00 = longw */
+#define	MCFDMA_DCR_SSIZE_BYTE  	0x0010		/* Src xfer size, 01 = byte */
+#define	MCFDMA_DCR_SSIZE_WORD  	0x0020		/* Src xfer size, 10 = word */
+#define	MCFDMA_DCR_SSIZE_LINE  	0x0030		/* Src xfer size, 11 = line */
+#define	MCFDMA_DCR_DINC        	0x0008		/* Dest addr inc enable */
+#define	MCFDMA_DCR_DSIZE_MASK  	0x0006		/* Dest xfer size */
+#define	MCFDMA_DCR_DSIZE_LONG  	0x0000		/* Dest xfer size, 00 = long */
+#define	MCFDMA_DCR_DSIZE_BYTE  	0x0002		/* Dest xfer size, 01 = byte */
+#define	MCFDMA_DCR_DSIZE_WORD  	0x0004		/* Dest xfer size, 10 = word */
+#define	MCFDMA_DCR_DSIZE_LINE  	0x0006		/* Dest xfer size, 11 = line */
+#define	MCFDMA_DCR_START       	0x0001		/* Start transfer */
+
+/*
+ *	Bit definitions for the DMA Status Register (DSR).
+ */
+#define	MCFDMA_DSR_CE	        0x40		/* Config error */
+#define	MCFDMA_DSR_BES	        0x20		/* Bus Error on source */
+#define	MCFDMA_DSR_BED 	        0x10		/* Bus Error on dest */
+#define	MCFDMA_DSR_REQ   	0x04		/* Requests remaining */
+#define	MCFDMA_DSR_BSY  	0x02		/* Busy */
+#define	MCFDMA_DSR_DONE        	0x01		/* DMA transfer complete */
+
+#else /* This is an MCF5272 */
+
+#define MCFDMA_DMR        0x00    /* Mode Register (r/w) */
+#define MCFDMA_DIR        0x03    /* Interrupt trigger register (r/w) */
+#define MCFDMA_DSAR       0x03    /* Source Address register (r/w) */
+#define MCFDMA_DDAR       0x04    /* Destination Address register (r/w) */
+#define MCFDMA_DBCR       0x02    /* Byte Count Register (r/w) */
+
+/* Bit definitions for the DMA Mode Register (DMR) */
+#define MCFDMA_DMR_RESET     0x80000000L /* Reset bit */
+#define MCFDMA_DMR_EN        0x40000000L /* DMA enable */
+#define MCFDMA_DMR_RQM       0x000C0000L /* Request Mode Mask */
+#define MCFDMA_DMR_RQM_DUAL  0x000C0000L /* Dual address mode, the only valid mode */
+#define MCFDMA_DMR_DSTM      0x00002000L /* Destination addressing mask */
+#define MCFDMA_DMR_DSTM_SA   0x00000000L /* Destination uses static addressing */
+#define MCFDMA_DMR_DSTM_IA   0x00002000L /* Destination uses incremental addressing */
+#define MCFDMA_DMR_DSTT_UD   0x00000400L /* Destination is user data */
+#define MCFDMA_DMR_DSTT_UC   0x00000800L /* Destination is user code */
+#define MCFDMA_DMR_DSTT_SD   0x00001400L /* Destination is supervisor data */
+#define MCFDMA_DMR_DSTT_SC   0x00001800L /* Destination is supervisor code */
+#define MCFDMA_DMR_DSTS_OFF  0x8         /* offset to the destination size bits */
+#define MCFDMA_DMR_DSTS_LONG 0x00000000L /* Long destination size */
+#define MCFDMA_DMR_DSTS_BYTE 0x00000100L /* Byte destination size */
+#define MCFDMA_DMR_DSTS_WORD 0x00000200L /* Word destination size */
+#define MCFDMA_DMR_DSTS_LINE 0x00000300L /* Line destination size */
+#define MCFDMA_DMR_SRCM      0x00000020L /* Source addressing mask */
+#define MCFDMA_DMR_SRCM_SA   0x00000000L /* Source uses static addressing */
+#define MCFDMA_DMR_SRCM_IA   0x00000020L /* Source uses incremental addressing */
+#define MCFDMA_DMR_SRCT_UD   0x00000004L /* Source is user data */
+#define MCFDMA_DMR_SRCT_UC   0x00000008L /* Source is user code */
+#define MCFDMA_DMR_SRCT_SD   0x00000014L /* Source is supervisor data */
+#define MCFDMA_DMR_SRCT_SC   0x00000018L /* Source is supervisor code */
+#define MCFDMA_DMR_SRCS_OFF  0x0         /* Offset to the source size bits */
+#define MCFDMA_DMR_SRCS_LONG 0x00000000L /* Long source size */
+#define MCFDMA_DMR_SRCS_BYTE 0x00000001L /* Byte source size */
+#define MCFDMA_DMR_SRCS_WORD 0x00000002L /* Word source size */
+#define MCFDMA_DMR_SRCS_LINE 0x00000003L /* Line source size */
+
+/* Bit definitions for the DMA interrupt register (DIR) */
+#define MCFDMA_DIR_INVEN     0x1000 /* Invalid Combination interrupt enable */
+#define MCFDMA_DIR_ASCEN     0x0800 /* Address Sequence Complete (Completion) interrupt enable */
+#define MCFDMA_DIR_TEEN      0x0200 /* Transfer Error interrupt enable */
+#define MCFDMA_DIR_TCEN      0x0100 /* Transfer Complete (a bus transfer, that is) interrupt enable */
+#define MCFDMA_DIR_INV       0x0010 /* Invalid Combination */
+#define MCFDMA_DIR_ASC       0x0008 /* Address Sequence Complete (DMA Completion) */
+#define MCFDMA_DIR_TE        0x0002 /* Transfer Error */
+#define MCFDMA_DIR_TC        0x0001 /* Transfer Complete */
+
+#endif /* !defined(CONFIG_M5272) */ 
+
+/****************************************************************************/
+#endif	/* mcfdma_h */
diff --git a/arch/m68knommu/include/asm/mcfmbus.h b/arch/m68knommu/include/asm/mcfmbus.h
new file mode 100644
index 00000000000..319899c47a2
--- /dev/null
+++ b/arch/m68knommu/include/asm/mcfmbus.h
@@ -0,0 +1,77 @@
+/****************************************************************************/
+
+/*
+ *      mcfmbus.h -- Coldfire MBUS support defines.
+ *
+ *      (C) Copyright 1999, Martin Floeer (mfloeer@axcent.de) 
+ */
+
+/****************************************************************************/
+
+
+#ifndef mcfmbus_h
+#define mcfmbus_h
+
+
+#define MCFMBUS_BASE		0x280
+#define MCFMBUS_IRQ_VECTOR	0x19
+#define MCFMBUS_IRQ		0x1
+#define MCFMBUS_CLK		0x3f
+#define MCFMBUS_IRQ_LEVEL	0x07	/*IRQ Level 1*/
+#define MCFMBUS_ADDRESS		0x01
+
+
+/*
+*	Define the 5307 MBUS register set addresses
+*/
+
+#define MCFMBUS_MADR	0x00
+#define MCFMBUS_MFDR	0x04
+#define MCFMBUS_MBCR	0x08
+#define MCFMBUS_MBSR	0x0C
+#define MCFMBUS_MBDR	0x10
+
+
+#define MCFMBUS_MADR_ADDR(a)	(((a)&0x7F)<<0x01) /*Slave Address*/
+
+#define MCFMBUS_MFDR_MBC(a)	((a)&0x3F)	   /*M-Bus Clock*/
+
+/*
+*	Define bit flags in Control Register
+*/
+
+#define MCFMBUS_MBCR_MEN           (0x80)  /* M-Bus Enable                 */
+#define MCFMBUS_MBCR_MIEN          (0x40)  /* M-Bus Interrupt Enable       */
+#define MCFMBUS_MBCR_MSTA          (0x20)  /* Master/Slave Mode Select Bit */
+#define MCFMBUS_MBCR_MTX           (0x10)  /* Transmit/Rcv Mode Select Bit */
+#define MCFMBUS_MBCR_TXAK          (0x08)  /* Transmit Acknowledge Enable  */
+#define MCFMBUS_MBCR_RSTA          (0x04)  /* Repeat Start                 */
+
+/*
+*	Define bit flags in Status Register
+*/
+
+#define MCFMBUS_MBSR_MCF           (0x80)  /* Data Transfer Complete       */
+#define MCFMBUS_MBSR_MAAS          (0x40)  /* Addressed as a Slave         */
+#define MCFMBUS_MBSR_MBB           (0x20)  /* Bus Busy                     */
+#define MCFMBUS_MBSR_MAL           (0x10)  /* Arbitration Lost             */
+#define MCFMBUS_MBSR_SRW           (0x04)  /* Slave Transmit               */
+#define MCFMBUS_MBSR_MIF           (0x02)  /* M-Bus Interrupt              */
+#define MCFMBUS_MBSR_RXAK          (0x01)  /* No Acknowledge Received      */
+
+/*
+*	Define bit flags in DATA I/O Register
+*/
+
+#define MCFMBUS_MBDR_READ          (0x01)  /* 1=read 0=write MBUS */
+
+#define MBUSIOCSCLOCK		1
+#define MBUSIOCGCLOCK		2
+#define MBUSIOCSADDR			3
+#define MBUSIOCGADDR			4
+#define MBUSIOCSSLADDR			5
+#define MBUSIOCGSLADDR			6
+#define MBUSIOCSSUBADDR			7
+#define MBUSIOCGSUBADDR			8
+
+#endif
diff --git a/arch/m68knommu/include/asm/mcfne.h b/arch/m68knommu/include/asm/mcfne.h
new file mode 100644
index 00000000000..431f63aadd0
--- /dev/null
+++ b/arch/m68knommu/include/asm/mcfne.h
@@ -0,0 +1,325 @@
+/****************************************************************************/
+
+/*
+ *	mcfne.h -- NE2000 in ColdFire eval boards.
+ *
+ *	(C) Copyright 1999-2000, Greg Ungerer (gerg@snapgear.com)
+ *	(C) Copyright 2000,      Lineo (www.lineo.com)
+ *	(C) Copyright 2001,      SnapGear (www.snapgear.com)
+ *
+ *      19990409 David W. Miller  Converted from m5206ne.h for 5307 eval board
+ *
+ *      Hacked support for m5206e Cadre III evaluation board
+ *      Fred Stevens (fred.stevens@pemstar.com) 13 April 1999
+ */
+
+/****************************************************************************/
+#ifndef	mcfne_h
+#define	mcfne_h
+/****************************************************************************/
+
+
+/*
+ *	Support for NE2000 clones devices in ColdFire based boards.
+ *	Not all boards address these parts the same way, some use a
+ *	direct addressing method, others use a side-band address space
+ *	to access odd address registers, some require byte swapping
+ *	others do not.
+ */
+#define	BSWAP(w)	(((w) << 8) | ((w) >> 8))
+#define	RSWAP(w)	(w)
+
+
+/*
+ *	Define the basic hardware resources of NE2000 boards.
+ */
+
+#if defined(CONFIG_ARN5206)
+#define NE2000_ADDR		0x40000300
+#define NE2000_ODDOFFSET	0x00010000
+#define	NE2000_IRQ_VECTOR	0xf0
+#define	NE2000_IRQ_PRIORITY	2
+#define	NE2000_IRQ_LEVEL	4
+#define	NE2000_BYTE		volatile unsigned short
+#endif
+
+#if defined(CONFIG_M5206eC3)
+#define	NE2000_ADDR		0x40000300
+#define	NE2000_ODDOFFSET	0x00010000
+#define	NE2000_IRQ_VECTOR	0x1c
+#define	NE2000_IRQ_PRIORITY	2
+#define	NE2000_IRQ_LEVEL	4
+#define	NE2000_BYTE		volatile unsigned short
+#endif
+
+#if defined(CONFIG_M5206e) && defined(CONFIG_NETtel)
+#define NE2000_ADDR		0x30000300
+#define NE2000_IRQ_VECTOR	25
+#define NE2000_IRQ_PRIORITY	1
+#define NE2000_IRQ_LEVEL	3
+#define	NE2000_BYTE		volatile unsigned char
+#endif
+
+#if defined(CONFIG_M5307C3)
+#define NE2000_ADDR		0x40000300
+#define NE2000_ODDOFFSET	0x00010000
+#define NE2000_IRQ_VECTOR	0x1b
+#define	NE2000_BYTE		volatile unsigned short
+#endif
+
+#if defined(CONFIG_M5272) && defined(CONFIG_NETtel)
+#define NE2000_ADDR		0x30600300
+#define NE2000_ODDOFFSET	0x00008000
+#define NE2000_IRQ_VECTOR	67
+#undef	BSWAP
+#define	BSWAP(w)		(w)
+#define	NE2000_BYTE		volatile unsigned short
+#undef	RSWAP
+#define	RSWAP(w)		(((w) << 8) | ((w) >> 8))
+#endif
+
+#if defined(CONFIG_M5307) && defined(CONFIG_NETtel)
+#define NE2000_ADDR0		0x30600300
+#define NE2000_ADDR1		0x30800300
+#define NE2000_ODDOFFSET	0x00008000
+#define NE2000_IRQ_VECTOR0	27
+#define NE2000_IRQ_VECTOR1	29
+#undef	BSWAP
+#define	BSWAP(w)		(w)
+#define	NE2000_BYTE		volatile unsigned short
+#undef	RSWAP
+#define	RSWAP(w)		(((w) << 8) | ((w) >> 8))
+#endif
+
+#if defined(CONFIG_M5307) && defined(CONFIG_SECUREEDGEMP3)
+#define NE2000_ADDR		0x30600300
+#define NE2000_ODDOFFSET	0x00008000
+#define NE2000_IRQ_VECTOR	27
+#undef	BSWAP
+#define	BSWAP(w)		(w)
+#define	NE2000_BYTE		volatile unsigned short
+#undef	RSWAP
+#define	RSWAP(w)		(((w) << 8) | ((w) >> 8))
+#endif
+
+#if defined(CONFIG_ARN5307)
+#define NE2000_ADDR		0xfe600300
+#define NE2000_ODDOFFSET	0x00010000
+#define NE2000_IRQ_VECTOR	0x1b
+#define NE2000_IRQ_PRIORITY	2
+#define NE2000_IRQ_LEVEL	3
+#define	NE2000_BYTE		volatile unsigned short
+#endif
+
+#if defined(CONFIG_M5407C3)
+#define NE2000_ADDR		0x40000300
+#define NE2000_ODDOFFSET	0x00010000
+#define NE2000_IRQ_VECTOR	0x1b
+#define	NE2000_BYTE		volatile unsigned short
+#endif
+
+/****************************************************************************/
+
+/*
+ *	Side-band address space for odd address requires re-mapping
+ *	many of the standard ISA access functions.
+ */
+#ifdef NE2000_ODDOFFSET
+
+#undef outb
+#undef outb_p
+#undef inb
+#undef inb_p
+#undef outsb
+#undef outsw
+#undef insb
+#undef insw
+
+#define	outb	ne2000_outb
+#define	inb	ne2000_inb
+#define	outb_p	ne2000_outb
+#define	inb_p	ne2000_inb
+#define	outsb	ne2000_outsb
+#define	outsw	ne2000_outsw
+#define	insb	ne2000_insb
+#define	insw	ne2000_insw
+
+
+#ifndef COLDFIRE_NE2000_FUNCS
+
+void ne2000_outb(unsigned int val, unsigned int addr);
+int  ne2000_inb(unsigned int addr);
+void ne2000_insb(unsigned int addr, void *vbuf, int unsigned long len);
+void ne2000_insw(unsigned int addr, void *vbuf, unsigned long len);
+void ne2000_outsb(unsigned int addr, void *vbuf, unsigned long len);
+void ne2000_outsw(unsigned int addr, void *vbuf, unsigned long len);
+
+#else
+
+/*
+ *	This macro converts a conventional register address into the
+ *	real memory pointer of the mapped NE2000 device.
+ *	On most NE2000 implementations on ColdFire boards the chip is
+ *	mapped in kinda funny, due to its ISA heritage.
+ */
+#define	NE2000_PTR(addr)	((addr&0x1)?(NE2000_ODDOFFSET+addr-1):(addr))
+#define	NE2000_DATA_PTR(addr)	(addr)
+
+
+void ne2000_outb(unsigned int val, unsigned int addr)
+{
+	NE2000_BYTE	*rp;
+
+	rp = (NE2000_BYTE *) NE2000_PTR(addr);
+	*rp = RSWAP(val);
+}
+
+int ne2000_inb(unsigned int addr)
+{
+	NE2000_BYTE	*rp, val;
+
+	rp = (NE2000_BYTE *) NE2000_PTR(addr);
+	val = *rp;
+	return((int) ((NE2000_BYTE) RSWAP(val)));
+}
+
+void ne2000_insb(unsigned int addr, void *vbuf, int unsigned long len)
+{
+	NE2000_BYTE	*rp, val;
+	unsigned char	*buf;
+
+	buf = (unsigned char *) vbuf;
+	rp = (NE2000_BYTE *) NE2000_DATA_PTR(addr);
+	for (; (len > 0); len--) {
+		val = *rp;
+		*buf++ = RSWAP(val);
+	}
+}
+
+void ne2000_insw(unsigned int addr, void *vbuf, unsigned long len)
+{
+	volatile unsigned short	*rp;
+	unsigned short		w, *buf;
+
+	buf = (unsigned short *) vbuf;
+	rp = (volatile unsigned short *) NE2000_DATA_PTR(addr);
+	for (; (len > 0); len--) {
+		w = *rp;
+		*buf++ = BSWAP(w);
+	}
+}
+
+void ne2000_outsb(unsigned int addr, const void *vbuf, unsigned long len)
+{
+	NE2000_BYTE	*rp, val;
+	unsigned char	*buf;
+
+	buf = (unsigned char *) vbuf;
+	rp = (NE2000_BYTE *) NE2000_DATA_PTR(addr);
+	for (; (len > 0); len--) {
+		val = *buf++;
+		*rp = RSWAP(val);
+	}
+}
+
+void ne2000_outsw(unsigned int addr, const void *vbuf, unsigned long len)
+{
+	volatile unsigned short	*rp;
+	unsigned short		w, *buf;
+
+	buf = (unsigned short *) vbuf;
+	rp = (volatile unsigned short *) NE2000_DATA_PTR(addr);
+	for (; (len > 0); len--) {
+		w = *buf++;
+		*rp = BSWAP(w);
+	}
+}
+
+#endif /* COLDFIRE_NE2000_FUNCS */
+#endif /* NE2000_OFFOFFSET */
+
+/****************************************************************************/
+
+#ifdef COLDFIRE_NE2000_FUNCS
+
+/*
+ *	Lastly the interrupt set up code...
+ *	Minor differences between the different board types.
+ */
+
+#if defined(CONFIG_ARN5206)
+void ne2000_irqsetup(int irq)
+{
+	volatile unsigned char  *icrp;
+
+	icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_ICR4);
+	*icrp = MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI2;
+	mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT4);
+}
+#endif
+
+#if defined(CONFIG_M5206eC3)
+void ne2000_irqsetup(int irq)
+{
+	volatile unsigned char  *icrp;
+
+	icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_ICR4);
+	*icrp = MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI2 | MCFSIM_ICR_AUTOVEC;
+	mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT4);
+}
+#endif
+
+#if defined(CONFIG_M5206e) && defined(CONFIG_NETtel)
+void ne2000_irqsetup(int irq)
+{
+	mcf_autovector(irq);
+}
+#endif
+
+#if defined(CONFIG_M5272) && defined(CONFIG_NETtel)
+void ne2000_irqsetup(int irq)
+{
+	volatile unsigned long	*icrp;
+	volatile unsigned long	*pitr;
+
+	/* The NE2000 device uses external IRQ3 */
+	icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1);
+	*icrp = (*icrp & 0x77077777) | 0x00d00000;
+
+	pitr = (volatile unsigned long *) (MCF_MBAR + MCFSIM_PITR);
+	*pitr = *pitr | 0x20000000;
+}
+
+void ne2000_irqack(int irq)
+{
+	volatile unsigned long	*icrp;
+
+	/* The NE2000 device uses external IRQ3 */
+	icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1);
+	*icrp = (*icrp & 0x77777777) | 0x00800000;
+}
+#endif
+
+#if defined(CONFIG_M5307) || defined(CONFIG_M5407)
+#if defined(CONFIG_NETtel) || defined(CONFIG_SECUREEDGEMP3)
+
+void ne2000_irqsetup(int irq)
+{
+	mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT3);
+	mcf_autovector(irq);
+}
+
+#else
+
+void ne2000_irqsetup(int irq)
+{
+	mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT3);
+}
+
+#endif /* ! CONFIG_NETtel || CONFIG_SECUREEDGEMP3 */
+#endif /* CONFIG_M5307 || CONFIG_M5407 */
+
+#endif /* COLDFIRE_NE2000_FUNCS */
+
+/****************************************************************************/
+#endif	/* mcfne_h */
diff --git a/arch/m68knommu/include/asm/mcfpci.h b/arch/m68knommu/include/asm/mcfpci.h
new file mode 100644
index 00000000000..f1507dd06ec
--- /dev/null
+++ b/arch/m68knommu/include/asm/mcfpci.h
@@ -0,0 +1,119 @@
+/****************************************************************************/
+
+/*
+ *	mcfpci.h -- PCI bridge on ColdFire eval boards.
+ *
+ *	(C) Copyright 2000, Greg Ungerer (gerg@snapgear.com)
+ *	(C) Copyright 2000, Lineo Inc. (www.lineo.com)
+ */
+
+/****************************************************************************/
+#ifndef	mcfpci_h
+#define	mcfpci_h
+/****************************************************************************/
+
+
+#ifdef CONFIG_PCI
+
+/*
+ *	Address regions in the PCI address space are not mapped into the
+ *	normal memory space of the ColdFire. They must be accessed via
+ *	handler routines. This is easy for I/O space (inb/outb/etc) but
+ *	needs some code changes to support ordinary memory. Interrupts
+ *	also need to be vectored through the PCI handler first, then it
+ *	will call the actual driver sub-handlers.
+ */
+
+/*
+ *	Un-define all the standard I/O access routines.
+ */
+#undef	inb
+#undef	inw
+#undef	inl
+#undef	inb_p
+#undef	inw_p
+#undef	insb
+#undef	insw
+#undef	insl
+#undef	outb
+#undef	outw
+#undef	outl
+#undef	outb_p
+#undef	outw_p
+#undef	outsb
+#undef	outsw
+#undef	outsl
+
+#undef	request_irq
+#undef	free_irq
+
+#undef	bus_to_virt
+#undef	virt_to_bus
+
+
+/*
+ *	Re-direct all I/O memory accesses functions to PCI specific ones.
+ */
+#define	inb	pci_inb
+#define	inw	pci_inw
+#define	inl	pci_inl
+#define	inb_p	pci_inb
+#define	inw_p	pci_inw
+#define	insb	pci_insb
+#define	insw	pci_insw
+#define	insl	pci_insl
+
+#define	outb	pci_outb
+#define	outw	pci_outw
+#define	outl	pci_outl
+#define	outb_p	pci_outb
+#define	outw_p	pci_outw
+#define	outsb	pci_outsb
+#define	outsw	pci_outsw
+#define	outsl	pci_outsl
+
+#define	request_irq	pci_request_irq
+#define	free_irq	pci_free_irq
+
+#define	virt_to_bus	pci_virt_to_bus
+#define	bus_to_virt	pci_bus_to_virt
+
+#define	CONFIG_COMEMPCI	1
+
+
+/*
+ *	Prototypes of the real PCI functions (defined in bios32.c).
+ */
+unsigned char	pci_inb(unsigned int addr);
+unsigned short	pci_inw(unsigned int addr);
+unsigned int	pci_inl(unsigned int addr);
+void		pci_insb(void *addr, void *buf, int len);
+void		pci_insw(void *addr, void *buf, int len);
+void		pci_insl(void *addr, void *buf, int len);
+
+void		pci_outb(unsigned char val, unsigned int addr);
+void		pci_outw(unsigned short val, unsigned int addr);
+void		pci_outl(unsigned int val, unsigned int addr);
+void		pci_outsb(void *addr, void *buf, int len);
+void		pci_outsw(void *addr, void *buf, int len);
+void		pci_outsl(void *addr, void *buf, int len);
+
+int		pci_request_irq(unsigned int irq,
+			void (*handler)(int, void *, struct pt_regs *),
+			unsigned long flags,
+			const char *device,
+			void *dev_id);
+void		pci_free_irq(unsigned int irq, void *dev_id);
+
+void		*pci_bmalloc(int size);
+void		pci_bmfree(void *bmp, int len);
+void		pci_copytoshmem(unsigned long bmp, void *src, int size);
+void		pci_copyfromshmem(void *dst, unsigned long bmp, int size);
+unsigned long	pci_virt_to_bus(volatile void *address);
+void		*pci_bus_to_virt(unsigned long address);
+void		pci_bmcpyto(void *dst, void *src, int len);
+void		pci_bmcpyfrom(void *dst, void *src, int len);
+
+#endif /* CONFIG_PCI */
+/****************************************************************************/
+#endif	/* mcfpci_h */
diff --git a/arch/m68knommu/include/asm/mcfpit.h b/arch/m68knommu/include/asm/mcfpit.h
new file mode 100644
index 00000000000..f570cf64fd2
--- /dev/null
+++ b/arch/m68knommu/include/asm/mcfpit.h
@@ -0,0 +1,64 @@
+/****************************************************************************/
+
+/*
+ *	mcfpit.h -- ColdFire internal PIT timer support defines.
+ *
+ *	(C) Copyright 2003, Greg Ungerer (gerg@snapgear.com)
+ */
+
+/****************************************************************************/
+#ifndef	mcfpit_h
+#define	mcfpit_h
+/****************************************************************************/
+
+
+/*
+ *	Get address specific defines for the 5270/5271, 5280/5282, and 5208.
+ */
+#if defined(CONFIG_M520x)
+#define	MCFPIT_BASE1		0x00080000	/* Base address of TIMER1 */
+#define	MCFPIT_BASE2		0x00084000	/* Base address of TIMER2 */
+#else
+#define	MCFPIT_BASE1		0x00150000	/* Base address of TIMER1 */
+#define	MCFPIT_BASE2		0x00160000	/* Base address of TIMER2 */
+#define	MCFPIT_BASE3		0x00170000	/* Base address of TIMER3 */
+#define	MCFPIT_BASE4		0x00180000	/* Base address of TIMER4 */
+#endif
+
+/*
+ *	Define the PIT timer register set addresses.
+ */
+#define	MCFPIT_PCSR		0x0		/* PIT control register */
+#define	MCFPIT_PMR		0x2		/* PIT modulus register */
+#define	MCFPIT_PCNTR		0x4		/* PIT count register */
+
+/*
+ *	Bit definitions for the PIT Control and Status register.
+ */
+#define	MCFPIT_PCSR_CLK1	0x0000		/* System clock divisor */
+#define	MCFPIT_PCSR_CLK2	0x0100		/* System clock divisor */
+#define	MCFPIT_PCSR_CLK4	0x0200		/* System clock divisor */
+#define	MCFPIT_PCSR_CLK8	0x0300		/* System clock divisor */
+#define	MCFPIT_PCSR_CLK16	0x0400		/* System clock divisor */
+#define	MCFPIT_PCSR_CLK32	0x0500		/* System clock divisor */
+#define	MCFPIT_PCSR_CLK64	0x0600		/* System clock divisor */
+#define	MCFPIT_PCSR_CLK128	0x0700		/* System clock divisor */
+#define	MCFPIT_PCSR_CLK256	0x0800		/* System clock divisor */
+#define	MCFPIT_PCSR_CLK512	0x0900		/* System clock divisor */
+#define	MCFPIT_PCSR_CLK1024	0x0a00		/* System clock divisor */
+#define	MCFPIT_PCSR_CLK2048	0x0b00		/* System clock divisor */
+#define	MCFPIT_PCSR_CLK4096	0x0c00		/* System clock divisor */
+#define	MCFPIT_PCSR_CLK8192	0x0d00		/* System clock divisor */
+#define	MCFPIT_PCSR_CLK16384	0x0e00		/* System clock divisor */
+#define	MCFPIT_PCSR_CLK32768	0x0f00		/* System clock divisor */
+#define	MCFPIT_PCSR_DOZE	0x0040		/* Clock run in doze mode */
+#define	MCFPIT_PCSR_HALTED	0x0020		/* Clock run in halt mode */
+#define	MCFPIT_PCSR_OVW		0x0010		/* Overwrite PIT counter now */
+#define	MCFPIT_PCSR_PIE		0x0008		/* Enable PIT interrupt */
+#define	MCFPIT_PCSR_PIF		0x0004		/* PIT interrupt flag */
+#define	MCFPIT_PCSR_RLD		0x0002		/* Reload counter */
+#define	MCFPIT_PCSR_EN		0x0001		/* Enable PIT */
+#define	MCFPIT_PCSR_DISABLE	0x0000		/* Disable PIT */
+
+/****************************************************************************/
+#endif	/* mcfpit_h */
diff --git a/arch/m68knommu/include/asm/mcfsim.h b/arch/m68knommu/include/asm/mcfsim.h
new file mode 100644
index 00000000000..da3f2ceff3a
--- /dev/null
+++ b/arch/m68knommu/include/asm/mcfsim.h
@@ -0,0 +1,126 @@
+/****************************************************************************/
+
+/*
+ *	mcfsim.h -- ColdFire System Integration Module support.
+ *
+ *	(C) Copyright 1999-2003, Greg Ungerer (gerg@snapgear.com)
+ * 	(C) Copyright 2000, Lineo Inc. (www.lineo.com) 
+ */
+
+/****************************************************************************/
+#ifndef	mcfsim_h
+#define	mcfsim_h
+/****************************************************************************/
+
+
+/*
+ *	Include 5204, 5206/e, 5235, 5249, 5270/5271, 5272, 5280/5282,
+ *	5307 or 5407 specific addresses.
+ */
+#if defined(CONFIG_M5206) || defined(CONFIG_M5206e)
+#include <asm/m5206sim.h>
+#elif defined(CONFIG_M520x)
+#include <asm/m520xsim.h>
+#elif defined(CONFIG_M523x)
+#include <asm/m523xsim.h>
+#elif defined(CONFIG_M5249)
+#include <asm/m5249sim.h>
+#elif defined(CONFIG_M527x)
+#include <asm/m527xsim.h>
+#elif defined(CONFIG_M5272)
+#include <asm/m5272sim.h>
+#elif defined(CONFIG_M528x)
+#include <asm/m528xsim.h>
+#elif defined(CONFIG_M5307)
+#include <asm/m5307sim.h>
+#elif defined(CONFIG_M532x)
+#include <asm/m532xsim.h>
+#elif defined(CONFIG_M5407)
+#include <asm/m5407sim.h>
+#endif
+
+
+/*
+ *	Define the base address of the SIM within the MBAR address space.
+ */
+#define	MCFSIM_BASE		0x0		/* Base address of SIM */
+
+
+/*
+ *	Bit definitions for the ICR family of registers.
+ */
+#define	MCFSIM_ICR_AUTOVEC	0x80		/* Auto-vectored intr */
+#define	MCFSIM_ICR_LEVEL0	0x00		/* Level 0 intr */
+#define	MCFSIM_ICR_LEVEL1	0x04		/* Level 1 intr */
+#define	MCFSIM_ICR_LEVEL2	0x08		/* Level 2 intr */
+#define	MCFSIM_ICR_LEVEL3	0x0c		/* Level 3 intr */
+#define	MCFSIM_ICR_LEVEL4	0x10		/* Level 4 intr */
+#define	MCFSIM_ICR_LEVEL5	0x14		/* Level 5 intr */
+#define	MCFSIM_ICR_LEVEL6	0x18		/* Level 6 intr */
+#define	MCFSIM_ICR_LEVEL7	0x1c		/* Level 7 intr */
+
+#define	MCFSIM_ICR_PRI0		0x00		/* Priority 0 intr */
+#define	MCFSIM_ICR_PRI1		0x01		/* Priority 1 intr */
+#define	MCFSIM_ICR_PRI2		0x02		/* Priority 2 intr */
+#define	MCFSIM_ICR_PRI3		0x03		/* Priority 3 intr */
+
+/*
+ *	Bit definitions for the Interrupt Mask register (IMR).
+ */
+#define	MCFSIM_IMR_EINT1	0x0002		/* External intr # 1 */
+#define	MCFSIM_IMR_EINT2	0x0004		/* External intr # 2 */
+#define	MCFSIM_IMR_EINT3	0x0008		/* External intr # 3 */
+#define	MCFSIM_IMR_EINT4	0x0010		/* External intr # 4 */
+#define	MCFSIM_IMR_EINT5	0x0020		/* External intr # 5 */
+#define	MCFSIM_IMR_EINT6	0x0040		/* External intr # 6 */
+#define	MCFSIM_IMR_EINT7	0x0080		/* External intr # 7 */
+
+#define	MCFSIM_IMR_SWD		0x0100		/* Software Watchdog intr */
+#define	MCFSIM_IMR_TIMER1	0x0200		/* TIMER 1 intr */
+#define	MCFSIM_IMR_TIMER2	0x0400		/* TIMER 2 intr */
+#define MCFSIM_IMR_MBUS		0x0800		/* MBUS intr	*/
+#define	MCFSIM_IMR_UART1	0x1000		/* UART 1 intr */
+#define	MCFSIM_IMR_UART2	0x2000		/* UART 2 intr */
+
+#if defined(CONFIG_M5206e)
+#define	MCFSIM_IMR_DMA1		0x4000		/* DMA 1 intr */
+#define	MCFSIM_IMR_DMA2		0x8000		/* DMA 2 intr */
+#elif defined(CONFIG_M5249) || defined(CONFIG_M5307)
+#define	MCFSIM_IMR_DMA0		0x4000		/* DMA 0 intr */
+#define	MCFSIM_IMR_DMA1		0x8000		/* DMA 1 intr */
+#define	MCFSIM_IMR_DMA2		0x10000		/* DMA 2 intr */
+#define	MCFSIM_IMR_DMA3		0x20000		/* DMA 3 intr */
+#endif
+
+/*
+ *	Mask for all of the SIM devices. Some parts have more or less
+ *	SIM devices. This is a catchall for the sandard set.
+ */
+#ifndef MCFSIM_IMR_MASKALL
+#define	MCFSIM_IMR_MASKALL	0x3ffe		/* All intr sources */
+#endif
+
+
+/*
+ *	PIT interrupt settings, if not found in mXXXXsim.h file.
+ */
+#ifndef	ICR_INTRCONF
+#define	ICR_INTRCONF		0x2b            /* PIT1 level 5, priority 3 */
+#endif
+#ifndef	MCFPIT_IMR
+#define	MCFPIT_IMR		MCFINTC_IMRH
+#endif
+#ifndef	MCFPIT_IMR_IBIT
+#define	MCFPIT_IMR_IBIT		(1 << (MCFINT_PIT1 - 32))
+#endif
+
+
+#ifndef __ASSEMBLY__
+/*
+ *	Definition for the interrupt auto-vectoring support.
+ */
+extern void	mcf_autovector(unsigned int vec);
+#endif /* __ASSEMBLY__ */
+
+/****************************************************************************/
+#endif	/* mcfsim_h */
diff --git a/arch/m68knommu/include/asm/mcfsmc.h b/arch/m68knommu/include/asm/mcfsmc.h
new file mode 100644
index 00000000000..2d7a4dbd968
--- /dev/null
+++ b/arch/m68knommu/include/asm/mcfsmc.h
@@ -0,0 +1,187 @@
+/****************************************************************************/
+
+/*
+ *	mcfsmc.h -- SMC ethernet support for ColdFire environments.
+ *
+ *	(C) Copyright 1999-2002, Greg Ungerer (gerg@snapgear.com)
+ *	(C) Copyright 2000, Lineo Inc. (www.lineo.com) 
+ */
+
+/****************************************************************************/
+#ifndef	mcfsmc_h
+#define	mcfsmc_h
+/****************************************************************************/
+
+/*
+ *	None of the current ColdFire targets that use the SMC91x111
+ *	allow 8 bit accesses. So this code is 16bit access only.
+ */
+
+
+#undef	outb
+#undef	inb
+#undef	outw
+#undef	outwd
+#undef	inw	
+#undef	outl
+#undef	inl
+
+#undef	outsb
+#undef	outsw
+#undef	outsl
+#undef	insb
+#undef	insw
+#undef	insl
+
+/*
+ *	Re-defines for ColdFire environment... The SMC part is
+ *	mapped into memory space, so remap the PC-style in/out
+ *	routines to handle that.
+ */
+#define	outb	smc_outb
+#define	inb	smc_inb
+#define	outw	smc_outw
+#define	outwd	smc_outwd
+#define	inw	smc_inw
+#define	outl	smc_outl
+#define	inl	smc_inl
+
+#define	outsb	smc_outsb
+#define	outsw	smc_outsw
+#define	outsl	smc_outsl
+#define	insb	smc_insb
+#define	insw	smc_insw
+#define	insl	smc_insl
+
+
+static inline int smc_inb(unsigned int addr)
+{
+	register unsigned short	w;
+	w = *((volatile unsigned short *) (addr & ~0x1));
+	return(((addr & 0x1) ? w : (w >> 8)) & 0xff);
+}
+
+static inline void smc_outw(unsigned int val, unsigned int addr)
+{
+	*((volatile unsigned short *) addr) = (val << 8) | (val >> 8);
+}
+
+static inline int smc_inw(unsigned int addr)
+{
+	register unsigned short	w;
+	w = *((volatile unsigned short *) addr);
+	return(((w << 8) | (w >> 8)) & 0xffff);
+}
+
+static inline void smc_outl(unsigned long val, unsigned int addr)
+{
+	*((volatile unsigned long *) addr) = 
+		((val << 8) & 0xff000000) | ((val >> 8) & 0x00ff0000) |
+		((val << 8) & 0x0000ff00) | ((val >> 8) & 0x000000ff);
+}
+
+static inline void smc_outwd(unsigned int val, unsigned int addr)
+{
+	*((volatile unsigned short *) addr) = val;
+}
+
+
+/*
+ *	The rep* functions are used to feed the data port with
+ *	raw data. So we do not byte swap them when copying.
+ */
+
+static inline void smc_insb(unsigned int addr, void *vbuf, int unsigned long len)
+{
+	volatile unsigned short	*rp;
+	unsigned short		*buf, *ebuf;
+
+	buf = (unsigned short *) vbuf;
+	rp = (volatile unsigned short *) addr;
+
+	/* Copy as words for as long as possible */
+	for (ebuf = buf + (len >> 1); (buf < ebuf); )
+		*buf++ = *rp;
+
+	/* Lastly, handle left over byte */
+	if (len & 0x1)
+		*((unsigned char *) buf) = (*rp >> 8) & 0xff;
+}
+
+static inline void smc_insw(unsigned int addr, void *vbuf, unsigned long len)
+{
+	volatile unsigned short	*rp;
+	unsigned short		*buf, *ebuf;
+
+	buf = (unsigned short *) vbuf;
+	rp = (volatile unsigned short *) addr;
+	for (ebuf = buf + len; (buf < ebuf); )
+		*buf++ = *rp;
+}
+
+static inline void smc_insl(unsigned int addr, void *vbuf, unsigned long len)
+{
+	volatile unsigned long	*rp;
+	unsigned long		*buf, *ebuf;
+
+	buf = (unsigned long *) vbuf;
+	rp = (volatile unsigned long *) addr;
+	for (ebuf = buf + len; (buf < ebuf); )
+		*buf++ = *rp;
+}
+
+static inline void smc_outsw(unsigned int addr, const void *vbuf, unsigned long len)
+{
+	volatile unsigned short	*rp;
+	unsigned short		*buf, *ebuf;
+
+	buf = (unsigned short *) vbuf;
+	rp = (volatile unsigned short *) addr;
+	for (ebuf = buf + len; (buf < ebuf); )
+		*rp = *buf++;
+}
+
+static inline void smc_outsl(unsigned int addr, void *vbuf, unsigned long len)
+{
+	volatile unsigned long	*rp;
+	unsigned long		*buf, *ebuf;
+
+	buf = (unsigned long *) vbuf;
+	rp = (volatile unsigned long *) addr;
+	for (ebuf = buf + len; (buf < ebuf); )
+		*rp = *buf++;
+}
+
+
+#ifdef CONFIG_NETtel
+/*
+ *	Re-map the address space of at least one of the SMC ethernet
+ *	parts. Both parts power up decoding the same address, so we
+ *	need to move one of them first, before doing enything else.
+ *
+ *	We also increase the number of wait states for this part by one.
+ */
+
+void smc_remap(unsigned int ioaddr)
+{
+	static int		once = 0;
+	extern unsigned short	ppdata;
+	if (once++ == 0) {
+		*((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADDR)) = 0x00ec;
+		ppdata |= 0x0080;
+		*((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADAT)) = ppdata;
+		outw(0x0001, ioaddr + BANK_SELECT);
+		outw(0x0001, ioaddr + BANK_SELECT);
+		outw(0x0067, ioaddr + BASE);
+
+		ppdata &= ~0x0080;
+		*((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADAT)) = ppdata;
+	}
+	
+	*((volatile unsigned short *)(MCF_MBAR+MCFSIM_CSCR3)) = 0x1180;
+}
+
+#endif
+
+/****************************************************************************/
+#endif	/* mcfsmc_h */
diff --git a/arch/m68knommu/include/asm/mcftimer.h b/arch/m68knommu/include/asm/mcftimer.h
new file mode 100644
index 00000000000..0f90f6d2227
--- /dev/null
+++ b/arch/m68knommu/include/asm/mcftimer.h
@@ -0,0 +1,80 @@
+/****************************************************************************/
+
+/*
+ *	mcftimer.h -- ColdFire internal TIMER support defines.
+ *
+ *	(C) Copyright 1999-2006, Greg Ungerer <gerg@snapgear.com>
+ * 	(C) Copyright 2000, Lineo Inc. (www.lineo.com) 
+ */
+
+/****************************************************************************/
+#ifndef	mcftimer_h
+#define	mcftimer_h
+/****************************************************************************/
+
+
+/*
+ *	Get address specific defines for this ColdFire member.
+ */
+#if defined(CONFIG_M5206) || defined(CONFIG_M5206e)
+#define	MCFTIMER_BASE1		0x100		/* Base address of TIMER1 */
+#define	MCFTIMER_BASE2		0x120		/* Base address of TIMER2 */
+#elif defined(CONFIG_M5272)
+#define MCFTIMER_BASE1		0x200           /* Base address of TIMER1 */
+#define MCFTIMER_BASE2		0x220           /* Base address of TIMER2 */
+#define MCFTIMER_BASE3		0x240           /* Base address of TIMER4 */
+#define MCFTIMER_BASE4		0x260           /* Base address of TIMER3 */
+#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407)
+#define MCFTIMER_BASE1		0x140           /* Base address of TIMER1 */
+#define MCFTIMER_BASE2		0x180           /* Base address of TIMER2 */
+#elif defined(CONFIG_M532x)
+#define MCFTIMER_BASE1		0xfc070000	/* Base address of TIMER1 */
+#define MCFTIMER_BASE2		0xfc074000	/* Base address of TIMER2 */
+#define MCFTIMER_BASE3		0xfc078000	/* Base address of TIMER3 */
+#define MCFTIMER_BASE4		0xfc07c000	/* Base address of TIMER4 */
+#endif
+
+
+/*
+ *	Define the TIMER register set addresses.
+ */
+#define	MCFTIMER_TMR		0x00		/* Timer Mode reg (r/w) */
+#define	MCFTIMER_TRR		0x04		/* Timer Reference (r/w) */
+#define	MCFTIMER_TCR		0x08		/* Timer Capture reg (r/w) */
+#define	MCFTIMER_TCN		0x0C		/* Timer Counter reg (r/w) */
+#if defined(CONFIG_M532x)
+#define	MCFTIMER_TER		0x03		/* Timer Event reg (r/w) */
+#else
+#define	MCFTIMER_TER		0x11		/* Timer Event reg (r/w) */
+#endif
+
+/*
+ *	Bit definitions for the Timer Mode Register (TMR).
+ *	Register bit flags are common accross ColdFires.
+ */
+#define	MCFTIMER_TMR_PREMASK	0xff00		/* Prescalar mask */
+#define	MCFTIMER_TMR_DISCE	0x0000		/* Disable capture */
+#define	MCFTIMER_TMR_ANYCE	0x00c0		/* Capture any edge */
+#define	MCFTIMER_TMR_FALLCE	0x0080		/* Capture fallingedge */
+#define	MCFTIMER_TMR_RISECE	0x0040		/* Capture rising edge */
+#define	MCFTIMER_TMR_ENOM	0x0020		/* Enable output toggle */
+#define	MCFTIMER_TMR_DISOM	0x0000		/* Do single output pulse  */
+#define	MCFTIMER_TMR_ENORI	0x0010		/* Enable ref interrupt */
+#define	MCFTIMER_TMR_DISORI	0x0000		/* Disable ref interrupt */
+#define	MCFTIMER_TMR_RESTART	0x0008		/* Restart counter */
+#define	MCFTIMER_TMR_FREERUN	0x0000		/* Free running counter */
+#define	MCFTIMER_TMR_CLKTIN	0x0006		/* Input clock is TIN */
+#define	MCFTIMER_TMR_CLK16	0x0004		/* Input clock is /16 */
+#define	MCFTIMER_TMR_CLK1	0x0002		/* Input clock is /1 */
+#define	MCFTIMER_TMR_CLKSTOP	0x0000		/* Stop counter */
+#define	MCFTIMER_TMR_ENABLE	0x0001		/* Enable timer */
+#define	MCFTIMER_TMR_DISABLE	0x0000		/* Disable timer */
+
+/*
+ *	Bit definitions for the Timer Event Registers (TER).
+ */
+#define	MCFTIMER_TER_CAP	0x01		/* Capture event */
+#define	MCFTIMER_TER_REF	0x02		/* Refernece event */
+
+/****************************************************************************/
+#endif	/* mcftimer_h */
diff --git a/arch/m68knommu/include/asm/mcfuart.h b/arch/m68knommu/include/asm/mcfuart.h
new file mode 100644
index 00000000000..ef229387361
--- /dev/null
+++ b/arch/m68knommu/include/asm/mcfuart.h
@@ -0,0 +1,216 @@
+/****************************************************************************/
+
+/*
+ *	mcfuart.h -- ColdFire internal UART support defines.
+ *
+ *	(C) Copyright 1999-2003, Greg Ungerer (gerg@snapgear.com)
+ * 	(C) Copyright 2000, Lineo Inc. (www.lineo.com) 
+ */
+
+/****************************************************************************/
+#ifndef	mcfuart_h
+#define	mcfuart_h
+/****************************************************************************/
+
+/*
+ *	Define the base address of the UARTS within the MBAR address
+ *	space.
+ */
+#if defined(CONFIG_M5272)
+#define	MCFUART_BASE1		0x100		/* Base address of UART1 */
+#define	MCFUART_BASE2		0x140		/* Base address of UART2 */
+#elif defined(CONFIG_M5206) || defined(CONFIG_M5206e)
+#if defined(CONFIG_NETtel)
+#define	MCFUART_BASE1		0x180		/* Base address of UART1 */
+#define	MCFUART_BASE2		0x140		/* Base address of UART2 */
+#else
+#define	MCFUART_BASE1		0x140		/* Base address of UART1 */
+#define	MCFUART_BASE2		0x180		/* Base address of UART2 */
+#endif
+#elif defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
+#define MCFUART_BASE1		0x200           /* Base address of UART1 */
+#define MCFUART_BASE2		0x240           /* Base address of UART2 */
+#define MCFUART_BASE3		0x280           /* Base address of UART3 */
+#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407)
+#if defined(CONFIG_NETtel) || defined(CONFIG_SECUREEDGEMP3)
+#define MCFUART_BASE1		0x200           /* Base address of UART1 */
+#define MCFUART_BASE2		0x1c0           /* Base address of UART2 */
+#else
+#define MCFUART_BASE1		0x1c0           /* Base address of UART1 */
+#define MCFUART_BASE2		0x200           /* Base address of UART2 */
+#endif
+#elif defined(CONFIG_M520x)
+#define MCFUART_BASE1		0x60000		/* Base address of UART1 */
+#define MCFUART_BASE2		0x64000		/* Base address of UART2 */
+#define MCFUART_BASE3		0x68000		/* Base address of UART2 */
+#elif defined(CONFIG_M532x)
+#define MCFUART_BASE1		0xfc060000	/* Base address of UART1 */
+#define MCFUART_BASE2		0xfc064000	/* Base address of UART2 */
+#define MCFUART_BASE3		0xfc068000	/* Base address of UART3 */
+#endif
+
+
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+struct mcf_platform_uart {
+	unsigned long	mapbase;	/* Physical address base */
+	void __iomem	*membase;	/* Virtual address if mapped */
+	unsigned int	irq;		/* Interrupt vector */
+	unsigned int	uartclk;	/* UART clock rate */
+};
+
+/*
+ *	Define the ColdFire UART register set addresses.
+ */
+#define	MCFUART_UMR		0x00		/* Mode register (r/w) */
+#define	MCFUART_USR		0x04		/* Status register (r) */
+#define	MCFUART_UCSR		0x04		/* Clock Select (w) */
+#define	MCFUART_UCR		0x08		/* Command register (w) */
+#define	MCFUART_URB		0x0c		/* Receiver Buffer (r) */
+#define	MCFUART_UTB		0x0c		/* Transmit Buffer (w) */
+#define	MCFUART_UIPCR		0x10		/* Input Port Change (r) */
+#define	MCFUART_UACR		0x10		/* Auxiliary Control (w) */
+#define	MCFUART_UISR		0x14		/* Interrupt Status (r) */
+#define	MCFUART_UIMR		0x14		/* Interrupt Mask (w) */
+#define	MCFUART_UBG1		0x18		/* Baud Rate MSB (r/w) */
+#define	MCFUART_UBG2		0x1c		/* Baud Rate LSB (r/w) */
+#ifdef	CONFIG_M5272
+#define	MCFUART_UTF		0x28		/* Transmitter FIFO (r/w) */
+#define	MCFUART_URF		0x2c		/* Receiver FIFO (r/w) */
+#define	MCFUART_UFPD		0x30		/* Frac Prec. Divider (r/w) */
+#else
+#define	MCFUART_UIVR		0x30		/* Interrupt Vector (r/w) */
+#endif
+#define	MCFUART_UIPR		0x34		/* Input Port (r) */
+#define	MCFUART_UOP1		0x38		/* Output Port Bit Set (w) */
+#define	MCFUART_UOP0		0x3c		/* Output Port Bit Reset (w) */
+
+
+/*
+ *	Define bit flags in Mode Register 1 (MR1).
+ */
+#define	MCFUART_MR1_RXRTS	0x80		/* Auto RTS flow control */
+#define	MCFUART_MR1_RXIRQFULL	0x40		/* RX IRQ type FULL */
+#define	MCFUART_MR1_RXIRQRDY	0x00		/* RX IRQ type RDY */
+#define	MCFUART_MR1_RXERRBLOCK	0x20		/* RX block error mode */
+#define	MCFUART_MR1_RXERRCHAR	0x00		/* RX char error mode */
+
+#define	MCFUART_MR1_PARITYNONE	0x10		/* No parity */
+#define	MCFUART_MR1_PARITYEVEN	0x00		/* Even parity */
+#define	MCFUART_MR1_PARITYODD	0x04		/* Odd parity */
+#define	MCFUART_MR1_PARITYSPACE	0x08		/* Space parity */
+#define	MCFUART_MR1_PARITYMARK	0x0c		/* Mark parity */
+
+#define	MCFUART_MR1_CS5		0x00		/* 5 bits per char */
+#define	MCFUART_MR1_CS6		0x01		/* 6 bits per char */
+#define	MCFUART_MR1_CS7		0x02		/* 7 bits per char */
+#define	MCFUART_MR1_CS8		0x03		/* 8 bits per char */
+
+/*
+ *	Define bit flags in Mode Register 2 (MR2).
+ */
+#define	MCFUART_MR2_LOOPBACK	0x80		/* Loopback mode */
+#define	MCFUART_MR2_REMOTELOOP	0xc0		/* Remote loopback mode */
+#define	MCFUART_MR2_AUTOECHO	0x40		/* Automatic echo */
+#define	MCFUART_MR2_TXRTS	0x20		/* Assert RTS on TX */
+#define	MCFUART_MR2_TXCTS	0x10		/* Auto CTS flow control */
+
+#define	MCFUART_MR2_STOP1	0x07		/* 1 stop bit */
+#define	MCFUART_MR2_STOP15	0x08		/* 1.5 stop bits */
+#define	MCFUART_MR2_STOP2	0x0f		/* 2 stop bits */
+
+/*
+ *	Define bit flags in Status Register (USR).
+ */
+#define	MCFUART_USR_RXBREAK	0x80		/* Received BREAK */
+#define	MCFUART_USR_RXFRAMING	0x40		/* Received framing error */
+#define	MCFUART_USR_RXPARITY	0x20		/* Received parity error */
+#define	MCFUART_USR_RXOVERRUN	0x10		/* Received overrun error */
+#define	MCFUART_USR_TXEMPTY	0x08		/* Transmitter empty */
+#define	MCFUART_USR_TXREADY	0x04		/* Transmitter ready */
+#define	MCFUART_USR_RXFULL	0x02		/* Receiver full */
+#define	MCFUART_USR_RXREADY	0x01		/* Receiver ready */
+
+#define	MCFUART_USR_RXERR	(MCFUART_USR_RXBREAK | MCFUART_USR_RXFRAMING | \
+				MCFUART_USR_RXPARITY | MCFUART_USR_RXOVERRUN)
+
+/*
+ *	Define bit flags in Clock Select Register (UCSR).
+ */
+#define	MCFUART_UCSR_RXCLKTIMER	0xd0		/* RX clock is timer */
+#define	MCFUART_UCSR_RXCLKEXT16	0xe0		/* RX clock is external x16 */
+#define	MCFUART_UCSR_RXCLKEXT1	0xf0		/* RX clock is external x1 */
+
+#define	MCFUART_UCSR_TXCLKTIMER	0x0d		/* TX clock is timer */
+#define	MCFUART_UCSR_TXCLKEXT16	0x0e		/* TX clock is external x16 */
+#define	MCFUART_UCSR_TXCLKEXT1	0x0f		/* TX clock is external x1 */
+
+/*
+ *	Define bit flags in Command Register (UCR).
+ */
+#define	MCFUART_UCR_CMDNULL		0x00	/* No command */
+#define	MCFUART_UCR_CMDRESETMRPTR	0x10	/* Reset MR pointer */
+#define	MCFUART_UCR_CMDRESETRX		0x20	/* Reset receiver */
+#define	MCFUART_UCR_CMDRESETTX		0x30	/* Reset transmitter */
+#define	MCFUART_UCR_CMDRESETERR		0x40	/* Reset error status */
+#define	MCFUART_UCR_CMDRESETBREAK	0x50	/* Reset BREAK change */
+#define	MCFUART_UCR_CMDBREAKSTART	0x60	/* Start BREAK */
+#define	MCFUART_UCR_CMDBREAKSTOP	0x70	/* Stop BREAK */
+
+#define	MCFUART_UCR_TXNULL	0x00		/* No TX command */
+#define	MCFUART_UCR_TXENABLE	0x04		/* Enable TX */
+#define	MCFUART_UCR_TXDISABLE	0x08		/* Disable TX */
+#define	MCFUART_UCR_RXNULL	0x00		/* No RX command */
+#define	MCFUART_UCR_RXENABLE	0x01		/* Enable RX */
+#define	MCFUART_UCR_RXDISABLE	0x02		/* Disable RX */
+
+/*
+ *	Define bit flags in Input Port Change Register (UIPCR).
+ */
+#define	MCFUART_UIPCR_CTSCOS	0x10		/* CTS change of state */
+#define	MCFUART_UIPCR_CTS	0x01		/* CTS value */
+
+/*
+ *	Define bit flags in Input Port Register (UIP).
+ */
+#define	MCFUART_UIPR_CTS	0x01		/* CTS value */
+
+/*
+ *	Define bit flags in Output Port Registers (UOP).
+ *	Clear bit by writing to UOP0, set by writing to UOP1.
+ */
+#define	MCFUART_UOP_RTS		0x01		/* RTS set or clear */
+
+/*
+ *	Define bit flags in the Auxiliary Control Register (UACR).
+ */
+#define	MCFUART_UACR_IEC	0x01		/* Input enable control */
+
+/*
+ *	Define bit flags in Interrupt Status Register (UISR).
+ *	These same bits are used for the Interrupt Mask Register (UIMR).
+ */
+#define	MCFUART_UIR_COS		0x80		/* Change of state (CTS) */
+#define	MCFUART_UIR_DELTABREAK	0x04		/* Break start or stop */
+#define	MCFUART_UIR_RXREADY	0x02		/* Receiver ready */
+#define	MCFUART_UIR_TXREADY	0x01		/* Transmitter ready */
+
+#ifdef	CONFIG_M5272
+/*
+ *	Define bit flags in the Transmitter FIFO Register (UTF).
+ */
+#define	MCFUART_UTF_TXB		0x1f		/* Transmitter data level */
+#define	MCFUART_UTF_FULL	0x20		/* Transmitter fifo full */
+#define	MCFUART_UTF_TXS		0xc0		/* Transmitter status */
+
+/*
+ *	Define bit flags in the Receiver FIFO Register (URF).
+ */
+#define	MCFUART_URF_RXB		0x1f		/* Receiver data level */
+#define	MCFUART_URF_FULL	0x20		/* Receiver fifo full */
+#define	MCFUART_URF_RXS		0xc0		/* Receiver status */
+#endif
+
+/****************************************************************************/
+#endif	/* mcfuart_h */
diff --git a/arch/m68knommu/include/asm/mcfwdebug.h b/arch/m68knommu/include/asm/mcfwdebug.h
new file mode 100644
index 00000000000..27f70e45d70
--- /dev/null
+++ b/arch/m68knommu/include/asm/mcfwdebug.h
@@ -0,0 +1,118 @@
+/****************************************************************************/
+
+/*
+ *	mcfdebug.h -- ColdFire Debug Module support.
+ *
+ * 	(C) Copyright 2001, Lineo Inc. (www.lineo.com) 
+ */
+
+/****************************************************************************/
+#ifndef mcfdebug_h
+#define mcfdebug_h
+/****************************************************************************/
+
+/* Define the debug module registers */
+#define MCFDEBUG_CSR	0x0			/* Configuration status		*/
+#define MCFDEBUG_BAAR	0x5			/* BDM address attribute	*/
+#define MCFDEBUG_AATR	0x6			/* Address attribute trigger	*/
+#define MCFDEBUG_TDR	0x7			/* Trigger definition		*/
+#define MCFDEBUG_PBR	0x8			/* PC breakpoint		*/
+#define MCFDEBUG_PBMR	0x9			/* PC breakpoint mask		*/
+#define MCFDEBUG_ABHR	0xc			/* High address breakpoint	*/
+#define MCFDEBUG_ABLR	0xd			/* Low address breakpoint	*/
+#define MCFDEBUG_DBR	0xe			/* Data breakpoint		*/
+#define MCFDEBUG_DBMR	0xf			/* Data breakpoint mask		*/
+
+/* Define some handy constants for the trigger definition register */
+#define MCFDEBUG_TDR_TRC_DISP	0x00000000	/* display on DDATA only	*/
+#define MCFDEBUG_TDR_TRC_HALT	0x40000000	/* Processor halt on BP		*/
+#define MCFDEBUG_TDR_TRC_INTR	0x80000000	/* Debug intr on BP		*/
+#define MCFDEBUG_TDR_LXT1	0x00004000	/* TDR level 1			*/
+#define MCFDEBUG_TDR_LXT2	0x00008000	/* TDR level 2			*/
+#define MCFDEBUG_TDR_EBL1	0x00002000	/* Enable breakpoint level 1	*/
+#define MCFDEBUG_TDR_EBL2	0x20000000	/* Enable breakpoint level 2	*/
+#define MCFDEBUG_TDR_EDLW1	0x00001000	/* Enable data BP longword	*/
+#define MCFDEBUG_TDR_EDLW2	0x10000000
+#define MCFDEBUG_TDR_EDWL1	0x00000800	/* Enable data BP lower word	*/
+#define MCFDEBUG_TDR_EDWL2	0x08000000
+#define MCFDEBUG_TDR_EDWU1	0x00000400	/* Enable data BP upper word	*/
+#define MCFDEBUG_TDR_EDWU2	0x04000000
+#define MCFDEBUG_TDR_EDLL1	0x00000200	/* Enable data BP low low byte	*/
+#define MCFDEBUG_TDR_EDLL2	0x02000000
+#define MCFDEBUG_TDR_EDLM1	0x00000100	/* Enable data BP low mid byte	*/
+#define MCFDEBUG_TDR_EDLM2	0x01000000
+#define MCFDEBUG_TDR_EDUM1	0x00000080	/* Enable data BP up mid byte	*/
+#define MCFDEBUG_TDR_EDUM2	0x00800000
+#define MCFDEBUG_TDR_EDUU1	0x00000040	/* Enable data BP up up byte	*/
+#define MCFDEBUG_TDR_EDUU2	0x00400000
+#define MCFDEBUG_TDR_DI1	0x00000020	/* Data BP invert		*/
+#define MCFDEBUG_TDR_DI2	0x00200000
+#define MCFDEBUG_TDR_EAI1	0x00000010	/* Enable address BP inverted	*/
+#define MCFDEBUG_TDR_EAI2	0x00100000
+#define MCFDEBUG_TDR_EAR1	0x00000008	/* Enable address BP range	*/
+#define MCFDEBUG_TDR_EAR2	0x00080000
+#define MCFDEBUG_TDR_EAL1	0x00000004	/* Enable address BP low	*/
+#define MCFDEBUG_TDR_EAL2	0x00040000
+#define MCFDEBUG_TDR_EPC1	0x00000002	/* Enable PC BP			*/
+#define MCFDEBUG_TDR_EPC2	0x00020000
+#define MCFDEBUG_TDR_PCI1	0x00000001	/* PC BP invert			*/
+#define MCFDEBUG_TDR_PCI2	0x00010000
+
+/* Constants for the address attribute trigger register */
+#define MCFDEBUG_AAR_RESET	0x00000005
+/* Fields not yet implemented */
+
+/* And some definitions for the writable sections of the CSR */
+#define MCFDEBUG_CSR_RESET	0x00100000
+#define MCFDEBUG_CSR_PSTCLK	0x00020000	/* PSTCLK disable		*/
+#define MCFDEBUG_CSR_IPW	0x00010000	/* Inhibit processor writes	*/
+#define MCFDEBUG_CSR_MAP	0x00008000	/* Processor refs in emul mode	*/
+#define MCFDEBUG_CSR_TRC	0x00004000	/* Emul mode on trace exception	*/
+#define MCFDEBUG_CSR_EMU	0x00002000	/* Force emulation mode		*/
+#define MCFDEBUG_CSR_DDC_READ	0x00000800	/* Debug data control		*/
+#define MCFDEBUG_CSR_DDC_WRITE	0x00001000
+#define MCFDEBUG_CSR_UHE	0x00000400	/* User mode halt enable	*/
+#define MCFDEBUG_CSR_BTB0	0x00000000	/* Branch target 0 bytes	*/
+#define MCFDEBUG_CSR_BTB2	0x00000100	/* Branch target 2 bytes	*/
+#define MCFDEBUG_CSR_BTB3	0x00000200	/* Branch target 3 bytes	*/
+#define MCFDEBUG_CSR_BTB4	0x00000300	/* Branch target 4 bytes	*/
+#define MCFDEBUG_CSR_NPL	0x00000040	/* Non-pipelined mode		*/
+#define MCFDEBUG_CSR_SSM	0x00000010	/* Single step mode		*/
+
+/* Constants for the BDM address attribute register */
+#define MCFDEBUG_BAAR_RESET	0x00000005
+/* Fields not yet implemented */
+
+
+/* This routine wrappers up the wdebug asm instruction so that the register
+ * and value can be relatively easily specified.  The biggest hassle here is
+ * that the debug module instructions (2 longs) must be long word aligned and
+ * some pointer fiddling is performed to ensure this.
+ */
+static inline void wdebug(int reg, unsigned long data) {
+	unsigned short dbg_spc[6];
+	unsigned short *dbg;
+
+	// Force alignment to long word boundary
+	dbg = (unsigned short *)((((unsigned long)dbg_spc) + 3) & 0xfffffffc);
+
+	// Build up the debug instruction
+	dbg[0] = 0x2c80 | (reg & 0xf);
+	dbg[1] = (data >> 16) & 0xffff;
+	dbg[2] = data & 0xffff;
+	dbg[3] = 0;
+
+	// Perform the wdebug instruction
+#if 0
+	// This strain is for gas which doesn't have the wdebug instructions defined
+	asm(	"move.l	%0, %%a0\n\t"
+		".word	0xfbd0\n\t"
+		".word	0x0003\n\t"
+	    :: "g" (dbg) : "a0");
+#else
+	// And this is for when it does
+	asm(	"wdebug	(%0)" :: "a" (dbg));
+#endif
+}
+
+#endif
diff --git a/arch/m68knommu/include/asm/md.h b/arch/m68knommu/include/asm/md.h
new file mode 100644
index 00000000000..d810c78de5f
--- /dev/null
+++ b/arch/m68knommu/include/asm/md.h
@@ -0,0 +1 @@
+#include <asm-m68k/md.h>
diff --git a/arch/m68knommu/include/asm/mman.h b/arch/m68knommu/include/asm/mman.h
new file mode 100644
index 00000000000..4846c682efe
--- /dev/null
+++ b/arch/m68knommu/include/asm/mman.h
@@ -0,0 +1 @@
+#include <asm-m68k/mman.h>
diff --git a/arch/m68knommu/include/asm/mmu.h b/arch/m68knommu/include/asm/mmu.h
new file mode 100644
index 00000000000..5fa6b68353b
--- /dev/null
+++ b/arch/m68knommu/include/asm/mmu.h
@@ -0,0 +1,11 @@
+#ifndef __M68KNOMMU_MMU_H
+#define __M68KNOMMU_MMU_H
+
+/* Copyright (C) 2002, David McCullough <davidm@snapgear.com> */
+
+typedef struct {
+	struct vm_list_struct	*vmlist;
+	unsigned long		end_brk;
+} mm_context_t;
+
+#endif /* __M68KNOMMU_MMU_H */
diff --git a/arch/m68knommu/include/asm/mmu_context.h b/arch/m68knommu/include/asm/mmu_context.h
new file mode 100644
index 00000000000..9ccee4278c9
--- /dev/null
+++ b/arch/m68knommu/include/asm/mmu_context.h
@@ -0,0 +1,33 @@
+#ifndef __M68KNOMMU_MMU_CONTEXT_H
+#define __M68KNOMMU_MMU_CONTEXT_H
+
+#include <asm/setup.h>
+#include <asm/page.h>
+#include <asm/pgalloc.h>
+#include <asm-generic/mm_hooks.h>
+
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+static inline int
+init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+{
+	// mm->context = virt_to_phys(mm->pgd);
+	return(0);
+}
+
+#define destroy_context(mm)		do { } while(0)
+
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk)
+{
+}
+
+#define deactivate_mm(tsk,mm)	do { } while (0)
+
+static inline void activate_mm(struct mm_struct *prev_mm,
+			       struct mm_struct *next_mm)
+{
+}
+
+#endif
diff --git a/arch/m68knommu/include/asm/module.h b/arch/m68knommu/include/asm/module.h
new file mode 100644
index 00000000000..2e45ab50b23
--- /dev/null
+++ b/arch/m68knommu/include/asm/module.h
@@ -0,0 +1,11 @@
+#ifndef ASM_M68KNOMMU_MODULE_H
+#define ASM_M68KNOMMU_MODULE_H
+
+struct mod_arch_specific {
+};
+
+#define Elf_Shdr Elf32_Shdr
+#define Elf_Sym Elf32_Sym
+#define Elf_Ehdr Elf32_Ehdr
+
+#endif /* ASM_M68KNOMMU_MODULE_H */
diff --git a/arch/m68knommu/include/asm/movs.h b/arch/m68knommu/include/asm/movs.h
new file mode 100644
index 00000000000..81a16779e83
--- /dev/null
+++ b/arch/m68knommu/include/asm/movs.h
@@ -0,0 +1 @@
+#include <asm-m68k/movs.h>
diff --git a/arch/m68knommu/include/asm/msgbuf.h b/arch/m68knommu/include/asm/msgbuf.h
new file mode 100644
index 00000000000..bdfadec4d52
--- /dev/null
+++ b/arch/m68knommu/include/asm/msgbuf.h
@@ -0,0 +1 @@
+#include <asm-m68k/msgbuf.h>
diff --git a/arch/m68knommu/include/asm/mutex.h b/arch/m68knommu/include/asm/mutex.h
new file mode 100644
index 00000000000..458c1f7fbc1
--- /dev/null
+++ b/arch/m68knommu/include/asm/mutex.h
@@ -0,0 +1,9 @@
+/*
+ * Pull in the generic implementation for the mutex fastpath.
+ *
+ * TODO: implement optimized primitives instead, or leave the generic
+ * implementation in place, or pick the atomic_xchg() based generic
+ * implementation. (see asm-generic/mutex-xchg.h for details)
+ */
+
+#include <asm-generic/mutex-dec.h>
diff --git a/arch/m68knommu/include/asm/nettel.h b/arch/m68knommu/include/asm/nettel.h
new file mode 100644
index 00000000000..0299f6a2dee
--- /dev/null
+++ b/arch/m68knommu/include/asm/nettel.h
@@ -0,0 +1,108 @@
+/****************************************************************************/
+
+/*
+ *	nettel.h -- Lineo (formerly Moreton Bay) NETtel support.
+ *
+ *	(C) Copyright 1999-2000, Moreton Bay (www.moretonbay.com)
+ * 	(C) Copyright 2000-2001, Lineo Inc. (www.lineo.com) 
+ * 	(C) Copyright 2001-2002, SnapGear Inc., (www.snapgear.com) 
+ */
+
+/****************************************************************************/
+#ifndef	nettel_h
+#define	nettel_h
+/****************************************************************************/
+
+
+/****************************************************************************/
+#ifdef CONFIG_NETtel
+/****************************************************************************/
+
+#ifdef CONFIG_COLDFIRE
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#endif
+
+/*---------------------------------------------------------------------------*/
+#if defined(CONFIG_M5307)
+/*
+ *	NETtel/5307 based hardware first. DTR/DCD lines are wired to
+ *	GPIO lines. Most of the LED's are driver through a latch
+ *	connected to CS2.
+ */
+#define	MCFPP_DCD1	0x0001
+#define	MCFPP_DCD0	0x0002
+#define	MCFPP_DTR1	0x0004
+#define	MCFPP_DTR0	0x0008
+
+#define	NETtel_LEDADDR	0x30400000
+
+#ifndef __ASSEMBLY__
+
+extern volatile unsigned short ppdata;
+
+/*
+ *	These functions defined to give quasi generic access to the
+ *	PPIO bits used for DTR/DCD.
+ */
+static __inline__ unsigned int mcf_getppdata(void)
+{
+	volatile unsigned short *pp;
+	pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PADAT);
+	return((unsigned int) *pp);
+}
+
+static __inline__ void mcf_setppdata(unsigned int mask, unsigned int bits)
+{
+	volatile unsigned short *pp;
+	pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PADAT);
+	ppdata = (ppdata & ~mask) | bits;
+	*pp = ppdata;
+}
+#endif
+
+/*---------------------------------------------------------------------------*/
+#elif defined(CONFIG_M5206e)
+/*
+ *	NETtel/5206e based hardware has leds on latch on CS3.
+ *	No support modem for lines??
+ */
+#define	NETtel_LEDADDR	0x50000000
+
+/*---------------------------------------------------------------------------*/
+#elif defined(CONFIG_M5272)
+/*
+ *	NETtel/5272 based hardware. DTR/DCD lines are wired to GPB lines.
+ */
+#define	MCFPP_DCD0	0x0080
+#define	MCFPP_DCD1	0x0000		/* Port 1 no DCD support */
+#define	MCFPP_DTR0	0x0040
+#define	MCFPP_DTR1	0x0000		/* Port 1 no DTR support */
+
+#ifndef __ASSEMBLY__
+/*
+ *	These functions defined to give quasi generic access to the
+ *	PPIO bits used for DTR/DCD.
+ */
+static __inline__ unsigned int mcf_getppdata(void)
+{
+	volatile unsigned short *pp;
+	pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PBDAT);
+	return((unsigned int) *pp);
+}
+
+static __inline__ void mcf_setppdata(unsigned int mask, unsigned int bits)
+{
+	volatile unsigned short *pp;
+	pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PBDAT);
+	*pp = (*pp & ~mask) | bits;
+}
+#endif
+
+#endif
+/*---------------------------------------------------------------------------*/
+
+/****************************************************************************/
+#endif /* CONFIG_NETtel */
+/****************************************************************************/
+#endif	/* nettel_h */
diff --git a/arch/m68knommu/include/asm/openprom.h b/arch/m68knommu/include/asm/openprom.h
new file mode 100644
index 00000000000..fdba7953ff9
--- /dev/null
+++ b/arch/m68knommu/include/asm/openprom.h
@@ -0,0 +1 @@
+#include <asm-m68k/openprom.h>
diff --git a/arch/m68knommu/include/asm/oplib.h b/arch/m68knommu/include/asm/oplib.h
new file mode 100644
index 00000000000..ce079dc332d
--- /dev/null
+++ b/arch/m68knommu/include/asm/oplib.h
@@ -0,0 +1 @@
+#include <asm-m68k/oplib.h>
diff --git a/arch/m68knommu/include/asm/page.h b/arch/m68knommu/include/asm/page.h
new file mode 100644
index 00000000000..3a1ede4544c
--- /dev/null
+++ b/arch/m68knommu/include/asm/page.h
@@ -0,0 +1,77 @@
+#ifndef _M68KNOMMU_PAGE_H
+#define _M68KNOMMU_PAGE_H
+
+/* PAGE_SHIFT determines the page size */
+
+#define PAGE_SHIFT	(12)
+#define PAGE_SIZE	(1UL << PAGE_SHIFT)
+#define PAGE_MASK	(~(PAGE_SIZE-1))
+
+#include <asm/setup.h>
+
+#ifndef __ASSEMBLY__
+ 
+#define get_user_page(vaddr)		__get_free_page(GFP_KERNEL)
+#define free_user_page(page, addr)	free_page(addr)
+
+#define clear_page(page)	memset((page), 0, PAGE_SIZE)
+#define copy_page(to,from)	memcpy((to), (from), PAGE_SIZE)
+
+#define clear_user_page(page, vaddr, pg)	clear_page(page)
+#define copy_user_page(to, from, vaddr, pg)	copy_page(to, from)
+
+#define __alloc_zeroed_user_highpage(movableflags, vma, vaddr) \
+	alloc_page_vma(GFP_HIGHUSER | __GFP_ZERO | movableflags, vma, vaddr)
+#define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE
+
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct { unsigned long pte; } pte_t;
+typedef struct { unsigned long pmd[16]; } pmd_t;
+typedef struct { unsigned long pgd; } pgd_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+typedef struct page *pgtable_t;
+
+#define pte_val(x)	((x).pte)
+#define pmd_val(x)	((&x)->pmd[0])
+#define pgd_val(x)	((x).pgd)
+#define pgprot_val(x)	((x).pgprot)
+
+#define __pte(x)	((pte_t) { (x) } )
+#define __pmd(x)	((pmd_t) { (x) } )
+#define __pgd(x)	((pgd_t) { (x) } )
+#define __pgprot(x)	((pgprot_t) { (x) } )
+
+extern unsigned long memory_start;
+extern unsigned long memory_end;
+
+#endif /* !__ASSEMBLY__ */
+
+#include <asm/page_offset.h>
+
+#define PAGE_OFFSET		(PAGE_OFFSET_RAW)
+
+#ifndef __ASSEMBLY__
+
+#define __pa(vaddr)		virt_to_phys((void *)(vaddr))
+#define __va(paddr)		phys_to_virt((unsigned long)(paddr))
+
+#define virt_to_pfn(kaddr)	(__pa(kaddr) >> PAGE_SHIFT)
+#define pfn_to_virt(pfn)	__va((pfn) << PAGE_SHIFT)
+
+#define virt_to_page(addr)	(mem_map + (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT))
+#define page_to_virt(page)	((((page) - mem_map) << PAGE_SHIFT) + PAGE_OFFSET)
+
+#define pfn_to_page(pfn)	virt_to_page(pfn_to_virt(pfn))
+#define page_to_pfn(page)	virt_to_pfn(page_to_virt(page))
+#define pfn_valid(pfn)	        ((pfn) < max_mapnr)
+
+#define	virt_addr_valid(kaddr)	(((void *)(kaddr) >= (void *)PAGE_OFFSET) && \
+				((void *)(kaddr) < (void *)memory_end))
+
+#endif /* __ASSEMBLY__ */
+
+#include <asm-generic/page.h>
+
+#endif /* _M68KNOMMU_PAGE_H */
diff --git a/arch/m68knommu/include/asm/page_offset.h b/arch/m68knommu/include/asm/page_offset.h
new file mode 100644
index 00000000000..d4e73e0ba64
--- /dev/null
+++ b/arch/m68knommu/include/asm/page_offset.h
@@ -0,0 +1,5 @@
+
+
+/* This handles the memory map.. */
+#define	PAGE_OFFSET_RAW		CONFIG_RAMBASE
+
diff --git a/arch/m68knommu/include/asm/param.h b/arch/m68knommu/include/asm/param.h
new file mode 100644
index 00000000000..6044397adb6
--- /dev/null
+++ b/arch/m68knommu/include/asm/param.h
@@ -0,0 +1,22 @@
+#ifndef _M68KNOMMU_PARAM_H
+#define _M68KNOMMU_PARAM_H
+
+#ifdef __KERNEL__
+#define HZ CONFIG_HZ
+#define	USER_HZ		HZ
+#define	CLOCKS_PER_SEC	(USER_HZ)
+#endif
+
+#ifndef HZ
+#define HZ	100
+#endif
+
+#define EXEC_PAGESIZE	4096
+
+#ifndef NOGROUP
+#define NOGROUP		(-1)
+#endif
+
+#define MAXHOSTNAMELEN	64	/* max length of hostname */
+
+#endif /* _M68KNOMMU_PARAM_H */
diff --git a/arch/m68knommu/include/asm/pci.h b/arch/m68knommu/include/asm/pci.h
new file mode 100644
index 00000000000..a13f3cc8745
--- /dev/null
+++ b/arch/m68knommu/include/asm/pci.h
@@ -0,0 +1,29 @@
+#ifndef M68KNOMMU_PCI_H
+#define	M68KNOMMU_PCI_H
+
+#include <asm-m68k/pci.h>
+
+#ifdef CONFIG_COMEMPCI
+/*
+ *	These are pretty much arbitary with the CoMEM implementation.
+ *	We have the whole address space to ourselves.
+ */
+#define PCIBIOS_MIN_IO		0x100
+#define PCIBIOS_MIN_MEM		0x00010000
+
+#define pcibios_scan_all_fns(a, b)	0
+
+/*
+ * Return whether the given PCI device DMA address mask can
+ * be supported properly.  For example, if your device can
+ * only drive the low 24-bits during PCI bus mastering, then
+ * you would pass 0x00ffffff as the mask to this function.
+ */
+static inline int pci_dma_supported(struct pci_dev *hwdev, u64 mask)
+{
+	return 1;
+}
+
+#endif /* CONFIG_COMEMPCI */
+
+#endif /* M68KNOMMU_PCI_H */
diff --git a/arch/m68knommu/include/asm/percpu.h b/arch/m68knommu/include/asm/percpu.h
new file mode 100644
index 00000000000..5de72c327ef
--- /dev/null
+++ b/arch/m68knommu/include/asm/percpu.h
@@ -0,0 +1,6 @@
+#ifndef __ARCH_M68KNOMMU_PERCPU__
+#define __ARCH_M68KNOMMU_PERCPU__
+
+#include <asm-generic/percpu.h>
+
+#endif /* __ARCH_M68KNOMMU_PERCPU__ */
diff --git a/arch/m68knommu/include/asm/pgalloc.h b/arch/m68knommu/include/asm/pgalloc.h
new file mode 100644
index 00000000000..d6352f671ec
--- /dev/null
+++ b/arch/m68knommu/include/asm/pgalloc.h
@@ -0,0 +1,8 @@
+#ifndef _M68KNOMMU_PGALLOC_H
+#define _M68KNOMMU_PGALLOC_H
+
+#include <asm/setup.h>
+
+#define check_pgt_cache()	do { } while (0)
+
+#endif /* _M68KNOMMU_PGALLOC_H */
diff --git a/arch/m68knommu/include/asm/pgtable.h b/arch/m68knommu/include/asm/pgtable.h
new file mode 100644
index 00000000000..46251016e82
--- /dev/null
+++ b/arch/m68knommu/include/asm/pgtable.h
@@ -0,0 +1,70 @@
+#ifndef _M68KNOMMU_PGTABLE_H
+#define _M68KNOMMU_PGTABLE_H
+
+#include <asm-generic/4level-fixup.h>
+
+/*
+ * (C) Copyright 2000-2002, Greg Ungerer <gerg@snapgear.com>
+ */
+
+#include <linux/slab.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/io.h>
+
+/*
+ * Trivial page table functions.
+ */
+#define pgd_present(pgd)	(1)
+#define pgd_none(pgd)		(0)
+#define pgd_bad(pgd)		(0)
+#define pgd_clear(pgdp)
+#define kern_addr_valid(addr)	(1)
+#define	pmd_offset(a, b)	((void *)0)
+
+#define PAGE_NONE	__pgprot(0)
+#define PAGE_SHARED	__pgprot(0)
+#define PAGE_COPY	__pgprot(0)
+#define PAGE_READONLY	__pgprot(0)
+#define PAGE_KERNEL	__pgprot(0)
+
+extern void paging_init(void);
+#define swapper_pg_dir ((pgd_t *) 0)
+
+#define __swp_type(x)		(0)
+#define __swp_offset(x)		(0)
+#define __swp_entry(typ,off)	((swp_entry_t) { ((typ) | ((off) << 7)) })
+#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)	((pte_t) { (x).val })
+
+static inline int pte_file(pte_t pte) { return 0; }
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+#define ZERO_PAGE(vaddr)	(virt_to_page(0))
+
+/*
+ * These would be in other places but having them here reduces the diffs.
+ */
+extern unsigned int kobjsize(const void *objp);
+
+/*
+ * No page table caches to initialise.
+ */
+#define pgtable_cache_init()	do { } while (0)
+
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot)		\
+		remap_pfn_range(vma, vaddr, pfn, size, prot)
+
+/*
+ * All 32bit addresses are effectively valid for vmalloc...
+ * Sort of meaningless for non-VM targets.
+ */
+#define	VMALLOC_START	0
+#define	VMALLOC_END	0xffffffff
+
+#include <asm-generic/pgtable.h>
+
+#endif /* _M68KNOMMU_PGTABLE_H */
diff --git a/arch/m68knommu/include/asm/poll.h b/arch/m68knommu/include/asm/poll.h
new file mode 100644
index 00000000000..ee1b6cb549c
--- /dev/null
+++ b/arch/m68knommu/include/asm/poll.h
@@ -0,0 +1 @@
+#include <asm-m68k/poll.h>
diff --git a/arch/m68knommu/include/asm/posix_types.h b/arch/m68knommu/include/asm/posix_types.h
new file mode 100644
index 00000000000..6205fb9392a
--- /dev/null
+++ b/arch/m68knommu/include/asm/posix_types.h
@@ -0,0 +1 @@
+#include <asm-m68k/posix_types.h>
diff --git a/arch/m68knommu/include/asm/processor.h b/arch/m68knommu/include/asm/processor.h
new file mode 100644
index 00000000000..91cba18acdd
--- /dev/null
+++ b/arch/m68knommu/include/asm/processor.h
@@ -0,0 +1,143 @@
+/*
+ * include/asm-m68knommu/processor.h
+ *
+ * Copyright (C) 1995 Hamish Macdonald
+ */
+
+#ifndef __ASM_M68K_PROCESSOR_H
+#define __ASM_M68K_PROCESSOR_H
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ __label__ _l; _l: &&_l;})
+
+#include <linux/compiler.h>
+#include <linux/threads.h>
+#include <asm/types.h>
+#include <asm/segment.h>
+#include <asm/fpu.h>
+#include <asm/ptrace.h>
+#include <asm/current.h>
+
+static inline unsigned long rdusp(void)
+{
+#ifdef CONFIG_COLDFIRE
+	extern unsigned int sw_usp;
+	return(sw_usp);
+#else
+  	unsigned long usp;
+	__asm__ __volatile__("move %/usp,%0" : "=a" (usp));
+	return usp;
+#endif
+}
+
+static inline void wrusp(unsigned long usp)
+{
+#ifdef CONFIG_COLDFIRE
+	extern unsigned int sw_usp;
+	sw_usp = usp;
+#else
+	__asm__ __volatile__("move %0,%/usp" : : "a" (usp));
+#endif
+}
+
+/*
+ * User space process size: 3.75GB. This is hardcoded into a few places,
+ * so don't change it unless you know what you are doing.
+ */
+#define TASK_SIZE	(0xF0000000UL)
+
+/*
+ * This decides where the kernel will search for a free chunk of vm
+ * space during mmap's. We won't be using it
+ */
+#define TASK_UNMAPPED_BASE	0
+
+/* 
+ * if you change this structure, you must change the code and offsets
+ * in m68k/machasm.S
+ */
+   
+struct thread_struct {
+	unsigned long  ksp;		/* kernel stack pointer */
+	unsigned long  usp;		/* user stack pointer */
+	unsigned short sr;		/* saved status register */
+	unsigned short fs;		/* saved fs (sfc, dfc) */
+	unsigned long  crp[2];		/* cpu root pointer */
+	unsigned long  esp0;		/* points to SR of stack frame */
+	unsigned long  fp[8*3];
+	unsigned long  fpcntl[3];	/* fp control regs */
+	unsigned char  fpstate[FPSTATESIZE];  /* floating point state */
+};
+
+#define INIT_THREAD  { \
+	sizeof(init_stack) + (unsigned long) init_stack, 0, \
+	PS_S, __KERNEL_DS, \
+	{0, 0}, 0, {0,}, {0, 0, 0}, {0,}, \
+}
+
+/*
+ * Coldfire stacks need to be re-aligned on trap exit, conventional
+ * 68k can handle this case cleanly.
+ */
+#if defined(CONFIG_COLDFIRE)
+#define	reformat(_regs)		do { (_regs)->format = 0x4; } while(0)
+#else
+#define	reformat(_regs)		do { } while (0)
+#endif
+
+/*
+ * Do necessary setup to start up a newly executed thread.
+ *
+ * pass the data segment into user programs if it exists,
+ * it can't hurt anything as far as I can tell
+ */
+#define start_thread(_regs, _pc, _usp)			\
+do {							\
+	set_fs(USER_DS); /* reads from user space */	\
+	(_regs)->pc = (_pc);				\
+	((struct switch_stack *)(_regs))[-1].a6 = 0;	\
+	reformat(_regs);				\
+	if (current->mm)				\
+		(_regs)->d5 = current->mm->start_data;	\
+	(_regs)->sr &= ~0x2000;				\
+	wrusp(_usp);					\
+} while(0)
+
+/* Forward declaration, a strange C thing */
+struct task_struct;
+
+/* Free all resources held by a thread. */
+static inline void release_thread(struct task_struct *dead_task)
+{
+}
+
+/* Prepare to copy thread state - unlazy all lazy status */
+#define prepare_to_copy(tsk)	do { } while (0)
+
+extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
+
+/*
+ * Free current thread data structures etc..
+ */
+static inline void exit_thread(void)
+{
+}
+
+unsigned long thread_saved_pc(struct task_struct *tsk);
+unsigned long get_wchan(struct task_struct *p);
+
+#define	KSTK_EIP(tsk)	\
+    ({			\
+	unsigned long eip = 0;	 \
+	if ((tsk)->thread.esp0 > PAGE_SIZE && \
+	    (virt_addr_valid((tsk)->thread.esp0))) \
+	      eip = ((struct pt_regs *) (tsk)->thread.esp0)->pc; \
+	eip; })
+#define	KSTK_ESP(tsk)	((tsk) == current ? rdusp() : (tsk)->thread.usp)
+
+#define cpu_relax()    barrier()
+
+#endif
diff --git a/arch/m68knommu/include/asm/ptrace.h b/arch/m68knommu/include/asm/ptrace.h
new file mode 100644
index 00000000000..8c9194b9854
--- /dev/null
+++ b/arch/m68knommu/include/asm/ptrace.h
@@ -0,0 +1,87 @@
+#ifndef _M68K_PTRACE_H
+#define _M68K_PTRACE_H
+
+#define PT_D1	   0
+#define PT_D2	   1
+#define PT_D3	   2
+#define PT_D4	   3
+#define PT_D5	   4
+#define PT_D6	   5
+#define PT_D7	   6
+#define PT_A0	   7
+#define PT_A1	   8
+#define PT_A2	   9
+#define PT_A3	   10
+#define PT_A4	   11
+#define PT_A5	   12
+#define PT_A6	   13
+#define PT_D0	   14
+#define PT_USP	   15
+#define PT_ORIG_D0 16
+#define PT_SR	   17
+#define PT_PC	   18
+
+#ifndef __ASSEMBLY__
+
+/* this struct defines the way the registers are stored on the
+   stack during a system call. */
+
+struct pt_regs {
+  long     d1;
+  long     d2;
+  long     d3;
+  long     d4;
+  long     d5;
+  long     a0;
+  long     a1;
+  long     a2;
+  long     d0;
+  long     orig_d0;
+  long     stkadj;
+#ifdef CONFIG_COLDFIRE
+  unsigned format :  4; /* frame format specifier */
+  unsigned vector : 12; /* vector offset */
+  unsigned short sr;
+  unsigned long  pc;
+#else
+  unsigned short sr;
+  unsigned long  pc;
+  unsigned format :  4; /* frame format specifier */
+  unsigned vector : 12; /* vector offset */
+#endif
+};
+
+/*
+ * This is the extended stack used by signal handlers and the context
+ * switcher: it's pushed after the normal "struct pt_regs".
+ */
+struct switch_stack {
+	unsigned long  d6;
+	unsigned long  d7;
+	unsigned long  a3;
+	unsigned long  a4;
+	unsigned long  a5;
+	unsigned long  a6;
+	unsigned long  retpc;
+};
+
+/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
+#define PTRACE_GETREGS            12
+#define PTRACE_SETREGS            13
+#define PTRACE_GETFPREGS          14
+#define PTRACE_SETFPREGS          15
+
+#ifdef __KERNEL__
+
+#ifndef PS_S
+#define PS_S  (0x2000)
+#define PS_M  (0x1000)
+#endif
+
+#define user_mode(regs) (!((regs)->sr & PS_S))
+#define instruction_pointer(regs) ((regs)->pc)
+#define profile_pc(regs) instruction_pointer(regs)
+extern void show_regs(struct pt_regs *);
+#endif /* __KERNEL__ */
+#endif /* __ASSEMBLY__ */
+#endif /* _M68K_PTRACE_H */
diff --git a/arch/m68knommu/include/asm/quicc_simple.h b/arch/m68knommu/include/asm/quicc_simple.h
new file mode 100644
index 00000000000..c3636932d4b
--- /dev/null
+++ b/arch/m68knommu/include/asm/quicc_simple.h
@@ -0,0 +1,52 @@
+/***********************************
+ * $Id: quicc_simple.h,v 1.1 2002/03/02 15:01:10 gerg Exp $
+ ***********************************
+ *
+ ***************************************
+ * Simple drivers common header
+ ***************************************
+ */
+
+#ifndef __SIMPLE_H
+#define __SIMPLE_H
+
+/* #include "quicc.h" */
+
+#define GLB_SCC_0   0
+#define GLB_SCC_1   1
+#define GLB_SCC_2   2
+#define GLB_SCC_3   3
+
+typedef void (int_routine)(unsigned short interrupt_event);
+typedef int_routine *int_routine_ptr; 
+typedef void *(alloc_routine)(int length);
+typedef void (free_routine)(int scc_num, int channel_num, void *buf);
+typedef void (store_rx_buffer_routine)(int scc_num, int channel_num, void *buff, int length);
+typedef int  (handle_tx_error_routine)(int scc_num, int channel_num, QUICC_BD *tbd);
+typedef void (handle_rx_error_routine)(int scc_num, int channel_num, QUICC_BD *rbd);
+typedef void (handle_lost_error_routine)(int scc_num, int channel_num);
+
+/* user defined functions for global errors */
+typedef void (handle_glob_overrun_routine)(int scc_number);
+typedef void (handle_glob_underrun_routine)(int scc_number);
+typedef void (glob_intr_q_overflow_routine)(int scc_number);
+
+/*
+ * General initialization and command routines
+ */
+void quicc_issue_cmd (unsigned short cmd, int scc_num);
+void quicc_init(void);
+void quicc_scc_init(int scc_number, int number_of_rx_buf, int number_of_tx_buf);
+void quicc_smc_init(int smc_number, int number_of_rx_buf, int number_of_tx_buf);
+void quicc_scc_start(int scc_num);
+void quicc_scc_loopback(int scc_num);
+
+/* Interrupt enable/disable routines for critical pieces of code*/
+unsigned short  IntrDis(void);
+void            IntrEna(unsigned short old_sr);
+
+/* For debugging */
+void print_rbd(int scc_num);
+void print_tbd(int scc_num);
+
+#endif
diff --git a/arch/m68knommu/include/asm/resource.h b/arch/m68knommu/include/asm/resource.h
new file mode 100644
index 00000000000..7fa63d5ea57
--- /dev/null
+++ b/arch/m68knommu/include/asm/resource.h
@@ -0,0 +1 @@
+#include <asm-m68k/resource.h>
diff --git a/arch/m68knommu/include/asm/rtc.h b/arch/m68knommu/include/asm/rtc.h
new file mode 100644
index 00000000000..eaf18ec83c8
--- /dev/null
+++ b/arch/m68knommu/include/asm/rtc.h
@@ -0,0 +1 @@
+#include <asm-m68k/rtc.h>
diff --git a/arch/m68knommu/include/asm/scatterlist.h b/arch/m68knommu/include/asm/scatterlist.h
new file mode 100644
index 00000000000..afc4788b0d2
--- /dev/null
+++ b/arch/m68knommu/include/asm/scatterlist.h
@@ -0,0 +1,22 @@
+#ifndef _M68KNOMMU_SCATTERLIST_H
+#define _M68KNOMMU_SCATTERLIST_H
+
+#include <linux/mm.h>
+#include <asm/types.h>
+
+struct scatterlist {
+#ifdef CONFIG_DEBUG_SG
+	unsigned long	sg_magic;
+#endif
+	unsigned long	page_link;
+	unsigned int	offset;
+	dma_addr_t	dma_address;
+	unsigned int	length;
+};
+
+#define sg_dma_address(sg)      ((sg)->dma_address)
+#define sg_dma_len(sg)          ((sg)->length)
+
+#define ISA_DMA_THRESHOLD	(0xffffffff)
+
+#endif /* !(_M68KNOMMU_SCATTERLIST_H) */
diff --git a/arch/m68knommu/include/asm/sections.h b/arch/m68knommu/include/asm/sections.h
new file mode 100644
index 00000000000..dd0ecb98ec0
--- /dev/null
+++ b/arch/m68knommu/include/asm/sections.h
@@ -0,0 +1,7 @@
+#ifndef _M68KNOMMU_SECTIONS_H
+#define _M68KNOMMU_SECTIONS_H
+
+/* nothing to see, move along */
+#include <asm-generic/sections.h>
+
+#endif
diff --git a/arch/m68knommu/include/asm/segment.h b/arch/m68knommu/include/asm/segment.h
new file mode 100644
index 00000000000..42318ebec7e
--- /dev/null
+++ b/arch/m68knommu/include/asm/segment.h
@@ -0,0 +1,51 @@
+#ifndef _M68K_SEGMENT_H
+#define _M68K_SEGMENT_H
+
+/* define constants */
+/* Address spaces (FC0-FC2) */
+#define USER_DATA     (1)
+#ifndef __USER_DS
+#define __USER_DS     (USER_DATA)
+#endif
+#define USER_PROGRAM  (2)
+#define SUPER_DATA    (5)
+#ifndef __KERNEL_DS
+#define __KERNEL_DS   (SUPER_DATA)
+#endif
+#define SUPER_PROGRAM (6)
+#define CPU_SPACE     (7)
+
+#ifndef __ASSEMBLY__
+
+typedef struct {
+	unsigned long seg;
+} mm_segment_t;
+
+#define MAKE_MM_SEG(s)	((mm_segment_t) { (s) })
+#define USER_DS		MAKE_MM_SEG(__USER_DS)
+#define KERNEL_DS	MAKE_MM_SEG(__KERNEL_DS)
+
+/*
+ * Get/set the SFC/DFC registers for MOVES instructions
+ */
+
+static inline mm_segment_t get_fs(void)
+{
+    return USER_DS;
+}
+
+static inline mm_segment_t get_ds(void)
+{
+    /* return the supervisor data space code */
+    return KERNEL_DS;
+}
+
+static inline void set_fs(mm_segment_t val)
+{
+}
+
+#define segment_eq(a,b)	((a).seg == (b).seg)
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _M68K_SEGMENT_H */
diff --git a/arch/m68knommu/include/asm/sembuf.h b/arch/m68knommu/include/asm/sembuf.h
new file mode 100644
index 00000000000..3a634f9ecf5
--- /dev/null
+++ b/arch/m68knommu/include/asm/sembuf.h
@@ -0,0 +1 @@
+#include <asm-m68k/sembuf.h>
diff --git a/arch/m68knommu/include/asm/setup.h b/arch/m68knommu/include/asm/setup.h
new file mode 100644
index 00000000000..fb86bb2a607
--- /dev/null
+++ b/arch/m68knommu/include/asm/setup.h
@@ -0,0 +1,10 @@
+#ifdef __KERNEL__
+
+#include <asm-m68k/setup.h>
+
+/* We have a bigger command line buffer. */
+#undef COMMAND_LINE_SIZE
+
+#endif  /*  __KERNEL__  */
+
+#define COMMAND_LINE_SIZE	512
diff --git a/arch/m68knommu/include/asm/shm.h b/arch/m68knommu/include/asm/shm.h
new file mode 100644
index 00000000000..cc8e522d905
--- /dev/null
+++ b/arch/m68knommu/include/asm/shm.h
@@ -0,0 +1 @@
+#include <asm-m68k/shm.h>
diff --git a/arch/m68knommu/include/asm/shmbuf.h b/arch/m68knommu/include/asm/shmbuf.h
new file mode 100644
index 00000000000..bc34cf8eefc
--- /dev/null
+++ b/arch/m68knommu/include/asm/shmbuf.h
@@ -0,0 +1 @@
+#include <asm-m68k/shmbuf.h>
diff --git a/arch/m68knommu/include/asm/shmparam.h b/arch/m68knommu/include/asm/shmparam.h
new file mode 100644
index 00000000000..d7ee69648eb
--- /dev/null
+++ b/arch/m68knommu/include/asm/shmparam.h
@@ -0,0 +1 @@
+#include <asm-m68k/shmparam.h>
diff --git a/arch/m68knommu/include/asm/sigcontext.h b/arch/m68knommu/include/asm/sigcontext.h
new file mode 100644
index 00000000000..36c293fc133
--- /dev/null
+++ b/arch/m68knommu/include/asm/sigcontext.h
@@ -0,0 +1,17 @@
+#ifndef _ASM_M68KNOMMU_SIGCONTEXT_H
+#define _ASM_M68KNOMMU_SIGCONTEXT_H
+
+struct sigcontext {
+	unsigned long  sc_mask; 	/* old sigmask */
+	unsigned long  sc_usp;		/* old user stack pointer */
+	unsigned long  sc_d0;
+	unsigned long  sc_d1;
+	unsigned long  sc_a0;
+	unsigned long  sc_a1;
+	unsigned long  sc_a5;
+	unsigned short sc_sr;
+	unsigned long  sc_pc;
+	unsigned short sc_formatvec;
+};
+
+#endif
diff --git a/arch/m68knommu/include/asm/siginfo.h b/arch/m68knommu/include/asm/siginfo.h
new file mode 100644
index 00000000000..b18e5f4064a
--- /dev/null
+++ b/arch/m68knommu/include/asm/siginfo.h
@@ -0,0 +1,6 @@
+#ifndef _M68KNOMMU_SIGINFO_H
+#define _M68KNOMMU_SIGINFO_H
+
+#include <asm-generic/siginfo.h>
+
+#endif
diff --git a/arch/m68knommu/include/asm/signal.h b/arch/m68knommu/include/asm/signal.h
new file mode 100644
index 00000000000..216c08be54a
--- /dev/null
+++ b/arch/m68knommu/include/asm/signal.h
@@ -0,0 +1,159 @@
+#ifndef _M68KNOMMU_SIGNAL_H
+#define _M68KNOMMU_SIGNAL_H
+
+#include <linux/types.h>
+
+/* Avoid too many header ordering problems.  */
+struct siginfo;
+
+#ifdef __KERNEL__
+/* Most things should be clean enough to redefine this at will, if care
+   is taken to make libc match.  */
+
+#define _NSIG		64
+#define _NSIG_BPW	32
+#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
+
+typedef unsigned long old_sigset_t;		/* at least 32 bits */
+
+typedef struct {
+	unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+#define NSIG		32
+typedef unsigned long sigset_t;
+
+#endif /* __KERNEL__ */
+
+#define SIGHUP		 1
+#define SIGINT		 2
+#define SIGQUIT		 3
+#define SIGILL		 4
+#define SIGTRAP		 5
+#define SIGABRT		 6
+#define SIGIOT		 6
+#define SIGBUS		 7
+#define SIGFPE		 8
+#define SIGKILL		 9
+#define SIGUSR1		10
+#define SIGSEGV		11
+#define SIGUSR2		12
+#define SIGPIPE		13
+#define SIGALRM		14
+#define SIGTERM		15
+#define SIGSTKFLT	16
+#define SIGCHLD		17
+#define SIGCONT		18
+#define SIGSTOP		19
+#define SIGTSTP		20
+#define SIGTTIN		21
+#define SIGTTOU		22
+#define SIGURG		23
+#define SIGXCPU		24
+#define SIGXFSZ		25
+#define SIGVTALRM	26
+#define SIGPROF		27
+#define SIGWINCH	28
+#define SIGIO		29
+#define SIGPOLL		SIGIO
+/*
+#define SIGLOST		29
+*/
+#define SIGPWR		30
+#define SIGSYS		31
+#define	SIGUNUSED	31
+
+/* These should not be considered constants from userland.  */
+#define SIGRTMIN	32
+#define SIGRTMAX	_NSIG
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP	0x00000001
+#define SA_NOCLDWAIT	0x00000002
+#define SA_SIGINFO	0x00000004
+#define SA_ONSTACK	0x08000000
+#define SA_RESTART	0x10000000
+#define SA_NODEFER	0x40000000
+#define SA_RESETHAND	0x80000000
+
+#define SA_NOMASK	SA_NODEFER
+#define SA_ONESHOT	SA_RESETHAND
+
+/* 
+ * sigaltstack controls
+ */
+#define SS_ONSTACK	1
+#define SS_DISABLE	2
+
+#define MINSIGSTKSZ	2048
+#define SIGSTKSZ	8192
+
+#include <asm-generic/signal.h>
+
+#ifdef __KERNEL__
+struct old_sigaction {
+	__sighandler_t sa_handler;
+	old_sigset_t sa_mask;
+	unsigned long sa_flags;
+	void (*sa_restorer)(void);
+};
+
+struct sigaction {
+	__sighandler_t sa_handler;
+	unsigned long sa_flags;
+	void (*sa_restorer)(void);
+	sigset_t sa_mask;		/* mask last for extensibility */
+};
+
+struct k_sigaction {
+	struct sigaction sa;
+};
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+struct sigaction {
+	union {
+	  __sighandler_t _sa_handler;
+	  void (*_sa_sigaction)(int, struct siginfo *, void *);
+	} _u;
+	sigset_t sa_mask;
+	unsigned long sa_flags;
+	void (*sa_restorer)(void);
+};
+
+#define sa_handler	_u._sa_handler
+#define sa_sigaction	_u._sa_sigaction
+
+#endif /* __KERNEL__ */
+
+typedef struct sigaltstack {
+	void *ss_sp;
+	int ss_flags;
+	size_t ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+
+#include <asm/sigcontext.h>
+#undef __HAVE_ARCH_SIG_BITOPS
+
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+#endif /* __KERNEL__ */
+
+#endif /* _M68KNOMMU_SIGNAL_H */
diff --git a/arch/m68knommu/include/asm/smp.h b/arch/m68knommu/include/asm/smp.h
new file mode 100644
index 00000000000..9e9bd7e5892
--- /dev/null
+++ b/arch/m68knommu/include/asm/smp.h
@@ -0,0 +1 @@
+/* nothing required here yet */
diff --git a/arch/m68knommu/include/asm/socket.h b/arch/m68knommu/include/asm/socket.h
new file mode 100644
index 00000000000..ac5478bf637
--- /dev/null
+++ b/arch/m68knommu/include/asm/socket.h
@@ -0,0 +1 @@
+#include <asm-m68k/socket.h>
diff --git a/arch/m68knommu/include/asm/sockios.h b/arch/m68knommu/include/asm/sockios.h
new file mode 100644
index 00000000000..dcc6a8900ce
--- /dev/null
+++ b/arch/m68knommu/include/asm/sockios.h
@@ -0,0 +1 @@
+#include <asm-m68k/sockios.h>
diff --git a/arch/m68knommu/include/asm/spinlock.h b/arch/m68knommu/include/asm/spinlock.h
new file mode 100644
index 00000000000..6bb1f06c478
--- /dev/null
+++ b/arch/m68knommu/include/asm/spinlock.h
@@ -0,0 +1 @@
+#include <asm-m68k/spinlock.h>
diff --git a/arch/m68knommu/include/asm/stat.h b/arch/m68knommu/include/asm/stat.h
new file mode 100644
index 00000000000..3d4b260e7c0
--- /dev/null
+++ b/arch/m68knommu/include/asm/stat.h
@@ -0,0 +1 @@
+#include <asm-m68k/stat.h>
diff --git a/arch/m68knommu/include/asm/statfs.h b/arch/m68knommu/include/asm/statfs.h
new file mode 100644
index 00000000000..2ce99eaf097
--- /dev/null
+++ b/arch/m68knommu/include/asm/statfs.h
@@ -0,0 +1 @@
+#include <asm-m68k/statfs.h>
diff --git a/arch/m68knommu/include/asm/string.h b/arch/m68knommu/include/asm/string.h
new file mode 100644
index 00000000000..af09e17000f
--- /dev/null
+++ b/arch/m68knommu/include/asm/string.h
@@ -0,0 +1,126 @@
+#ifndef _M68KNOMMU_STRING_H_
+#define _M68KNOMMU_STRING_H_
+
+#ifdef __KERNEL__ /* only set these up for kernel code */
+
+#include <asm/setup.h>
+#include <asm/page.h>
+
+#define __HAVE_ARCH_STRCPY
+static inline char * strcpy(char * dest,const char *src)
+{
+  char *xdest = dest;
+
+  __asm__ __volatile__
+       ("1:\tmoveb %1@+,%0@+\n\t"
+        "jne 1b"
+	: "=a" (dest), "=a" (src)
+        : "0" (dest), "1" (src) : "memory");
+  return xdest;
+}
+
+#define __HAVE_ARCH_STRNCPY
+static inline char * strncpy(char *dest, const char *src, size_t n)
+{
+  char *xdest = dest;
+
+  if (n == 0)
+    return xdest;
+
+  __asm__ __volatile__
+       ("1:\tmoveb %1@+,%0@+\n\t"
+	"jeq 2f\n\t"
+        "subql #1,%2\n\t"
+        "jne 1b\n\t"
+        "2:"
+        : "=a" (dest), "=a" (src), "=d" (n)
+        : "0" (dest), "1" (src), "2" (n)
+        : "memory");
+  return xdest;
+}
+
+
+#ifndef CONFIG_COLDFIRE
+
+#define __HAVE_ARCH_STRCMP
+static inline int strcmp(const char * cs,const char * ct)
+{
+  char __res;
+
+  __asm__
+       ("1:\tmoveb %0@+,%2\n\t" /* get *cs */
+        "cmpb %1@+,%2\n\t"      /* compare a byte */
+        "jne  2f\n\t"           /* not equal, break out */
+        "tstb %2\n\t"           /* at end of cs? */
+        "jne  1b\n\t"           /* no, keep going */
+        "jra  3f\n\t"		/* strings are equal */
+        "2:\tsubb %1@-,%2\n\t"  /* *cs - *ct */
+        "3:"
+        : "=a" (cs), "=a" (ct), "=d" (__res)
+        : "0" (cs), "1" (ct));
+
+  return __res;
+}
+
+#define __HAVE_ARCH_STRNCMP
+static inline int strncmp(const char * cs,const char * ct,size_t count)
+{
+  char __res;
+
+  if (!count)
+    return 0;
+  __asm__
+       ("1:\tmovb %0@+,%3\n\t"          /* get *cs */
+        "cmpb   %1@+,%3\n\t"            /* compare a byte */
+        "jne    3f\n\t"                 /* not equal, break out */
+        "tstb   %3\n\t"                 /* at end of cs? */
+        "jeq    4f\n\t"                 /* yes, all done */
+        "subql  #1,%2\n\t"              /* no, adjust count */
+        "jne    1b\n\t"                 /* more to do, keep going */
+        "2:\tmoveq #0,%3\n\t"           /* strings are equal */
+        "jra    4f\n\t"
+        "3:\tsubb %1@-,%3\n\t"          /* *cs - *ct */
+        "4:"
+        : "=a" (cs), "=a" (ct), "=d" (count), "=d" (__res)
+        : "0" (cs), "1" (ct), "2" (count));
+  return __res;
+}
+
+#endif /* CONFIG_COLDFIRE */
+
+#define __HAVE_ARCH_MEMSET
+extern void * memset(void * s, int c, size_t count);
+
+#define __HAVE_ARCH_MEMCPY
+extern void * memcpy(void *d, const void *s, size_t count);
+
+#else /* KERNEL */
+
+/*
+ *	let user libraries deal with these,
+ *	IMHO the kernel has no place defining these functions for user apps
+ */
+
+#define __HAVE_ARCH_STRCPY 1
+#define __HAVE_ARCH_STRNCPY 1
+#define __HAVE_ARCH_STRCAT 1
+#define __HAVE_ARCH_STRNCAT 1
+#define __HAVE_ARCH_STRCMP 1
+#define __HAVE_ARCH_STRNCMP 1
+#define __HAVE_ARCH_STRNICMP 1
+#define __HAVE_ARCH_STRCHR 1
+#define __HAVE_ARCH_STRRCHR 1
+#define __HAVE_ARCH_STRSTR 1
+#define __HAVE_ARCH_STRLEN 1
+#define __HAVE_ARCH_STRNLEN 1
+#define __HAVE_ARCH_MEMSET 1
+#define __HAVE_ARCH_MEMCPY 1
+#define __HAVE_ARCH_MEMMOVE 1
+#define __HAVE_ARCH_MEMSCAN 1
+#define __HAVE_ARCH_MEMCMP 1
+#define __HAVE_ARCH_MEMCHR 1
+#define __HAVE_ARCH_STRTOK 1
+
+#endif /* KERNEL */
+
+#endif /* _M68K_STRING_H_ */
diff --git a/arch/m68knommu/include/asm/system.h b/arch/m68knommu/include/asm/system.h
new file mode 100644
index 00000000000..40f49de6982
--- /dev/null
+++ b/arch/m68knommu/include/asm/system.h
@@ -0,0 +1,324 @@
+#ifndef _M68KNOMMU_SYSTEM_H
+#define _M68KNOMMU_SYSTEM_H
+
+#include <linux/linkage.h>
+#include <asm/segment.h>
+#include <asm/entry.h>
+
+/*
+ * switch_to(n) should switch tasks to task ptr, first checking that
+ * ptr isn't the current task, in which case it does nothing.  This
+ * also clears the TS-flag if the task we switched to has used the
+ * math co-processor latest.
+ */
+/*
+ * switch_to() saves the extra registers, that are not saved
+ * automatically by SAVE_SWITCH_STACK in resume(), ie. d0-d5 and
+ * a0-a1. Some of these are used by schedule() and its predecessors
+ * and so we might get see unexpected behaviors when a task returns
+ * with unexpected register values.
+ *
+ * syscall stores these registers itself and none of them are used
+ * by syscall after the function in the syscall has been called.
+ *
+ * Beware that resume now expects *next to be in d1 and the offset of
+ * tss to be in a1. This saves a few instructions as we no longer have
+ * to push them onto the stack and read them back right after.
+ *
+ * 02/17/96 - Jes Sorensen (jds@kom.auc.dk)
+ *
+ * Changed 96/09/19 by Andreas Schwab
+ * pass prev in a0, next in a1, offset of tss in d1, and whether
+ * the mm structures are shared in d2 (to avoid atc flushing).
+ */
+asmlinkage void resume(void);
+#define switch_to(prev,next,last)				\
+{								\
+  void *_last;							\
+  __asm__ __volatile__(						\
+  	"movel	%1, %%a0\n\t"					\
+	"movel	%2, %%a1\n\t"					\
+	"jbsr resume\n\t"					\
+	"movel	%%d1, %0\n\t"					\
+       : "=d" (_last)						\
+       : "d" (prev), "d" (next)					\
+       : "cc", "d0", "d1", "d2", "d3", "d4", "d5", "a0", "a1");	\
+  (last) = _last;						\
+}
+
+#ifdef CONFIG_COLDFIRE
+#define local_irq_enable() __asm__ __volatile__ (		\
+	"move %/sr,%%d0\n\t"					\
+	"andi.l #0xf8ff,%%d0\n\t"				\
+	"move %%d0,%/sr\n"					\
+	: /* no outputs */					\
+	:							\
+        : "cc", "%d0", "memory")
+#define local_irq_disable() __asm__ __volatile__ (		\
+	"move %/sr,%%d0\n\t"					\
+	"ori.l #0x0700,%%d0\n\t"				\
+	"move %%d0,%/sr\n"					\
+	: /* no outputs */					\
+	:							\
+	: "cc", "%d0", "memory")
+/* For spinlocks etc */
+#define local_irq_save(x) __asm__ __volatile__ (		\
+	"movew %%sr,%0\n\t"					\
+	"movew #0x0700,%%d0\n\t"				\
+	"or.l  %0,%%d0\n\t"					\
+	"movew %%d0,%/sr"					\
+	: "=d" (x)						\
+	:							\
+	: "cc", "%d0", "memory")
+#else
+
+/* portable version */ /* FIXME - see entry.h*/
+#define ALLOWINT 0xf8ff
+
+#define local_irq_enable() asm volatile ("andiw %0,%%sr": : "i" (ALLOWINT) : "memory")
+#define local_irq_disable() asm volatile ("oriw  #0x0700,%%sr": : : "memory")
+#endif
+
+#define local_save_flags(x) asm volatile ("movew %%sr,%0":"=d" (x) : : "memory")
+#define local_irq_restore(x) asm volatile ("movew %0,%%sr": :"d" (x) : "memory")
+
+/* For spinlocks etc */
+#ifndef local_irq_save
+#define local_irq_save(x) do { local_save_flags(x); local_irq_disable(); } while (0)
+#endif
+
+#define	irqs_disabled()			\
+({					\
+	unsigned long flags;		\
+	local_save_flags(flags);	\
+	((flags & 0x0700) == 0x0700);	\
+})
+
+#define iret() __asm__ __volatile__ ("rte": : :"memory", "sp", "cc")
+
+/*
+ * Force strict CPU ordering.
+ * Not really required on m68k...
+ */
+#define nop()  asm volatile ("nop"::)
+#define mb()   asm volatile (""   : : :"memory")
+#define rmb()  asm volatile (""   : : :"memory")
+#define wmb()  asm volatile (""   : : :"memory")
+#define set_mb(var, value)	({ (var) = (value); wmb(); })
+
+#ifdef CONFIG_SMP
+#define smp_mb()	mb()
+#define smp_rmb()	rmb()
+#define smp_wmb()	wmb()
+#define smp_read_barrier_depends()	read_barrier_depends()
+#else
+#define smp_mb()	barrier()
+#define smp_rmb()	barrier()
+#define smp_wmb()	barrier()
+#define smp_read_barrier_depends()	do { } while(0)
+#endif
+
+#define read_barrier_depends()  ((void)0)
+
+#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
+
+struct __xchg_dummy { unsigned long a[100]; };
+#define __xg(x) ((volatile struct __xchg_dummy *)(x))
+
+#ifndef CONFIG_RMW_INSNS
+static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
+{
+  unsigned long tmp, flags;
+
+  local_irq_save(flags);
+
+  switch (size) {
+  case 1:
+    __asm__ __volatile__
+    ("moveb %2,%0\n\t"
+     "moveb %1,%2"
+    : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory");
+    break;
+  case 2:
+    __asm__ __volatile__
+    ("movew %2,%0\n\t"
+     "movew %1,%2"
+    : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory");
+    break;
+  case 4:
+    __asm__ __volatile__
+    ("movel %2,%0\n\t"
+     "movel %1,%2"
+    : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory");
+    break;
+  }
+  local_irq_restore(flags);
+  return tmp;
+}
+#else
+static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
+{
+	switch (size) {
+	    case 1:
+		__asm__ __volatile__
+			("moveb %2,%0\n\t"
+			 "1:\n\t"
+			 "casb %0,%1,%2\n\t"
+			 "jne 1b"
+			 : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory");
+		break;
+	    case 2:
+		__asm__ __volatile__
+			("movew %2,%0\n\t"
+			 "1:\n\t"
+			 "casw %0,%1,%2\n\t"
+			 "jne 1b"
+			 : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory");
+		break;
+	    case 4:
+		__asm__ __volatile__
+			("movel %2,%0\n\t"
+			 "1:\n\t"
+			 "casl %0,%1,%2\n\t"
+			 "jne 1b"
+			 : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory");
+		break;
+	}
+	return x;
+}
+#endif
+
+#include <asm-generic/cmpxchg-local.h>
+
+/*
+ * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
+ * them available.
+ */
+#define cmpxchg_local(ptr, o, n)				  	       \
+	((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\
+			(unsigned long)(n), sizeof(*(ptr))))
+#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
+
+#ifndef CONFIG_SMP
+#include <asm-generic/cmpxchg.h>
+#endif
+
+#if defined( CONFIG_M68328 ) || defined( CONFIG_M68EZ328 ) || \
+	defined (CONFIG_M68360) || defined( CONFIG_M68VZ328 )
+#define HARD_RESET_NOW() ({		\
+        local_irq_disable();		\
+        asm("				\
+        moveal #0x10c00000, %a0;	\
+        moveb #0, 0xFFFFF300;		\
+        moveal 0(%a0), %sp;		\
+        moveal 4(%a0), %a0;		\
+        jmp (%a0);			\
+        ");				\
+})
+#endif
+
+#ifdef CONFIG_COLDFIRE
+#if defined(CONFIG_M5272) && defined(CONFIG_NETtel)
+/*
+ * Need to account for broken early mask of 5272 silicon. So don't
+ * jump through the original start address. Jump strait into the
+ * known start of the FLASH code.
+ */
+#define HARD_RESET_NOW() ({		\
+        asm("				\
+	movew #0x2700, %sr;		\
+        jmp 0xf0000400;			\
+        ");				\
+})
+#elif defined(CONFIG_NETtel) || defined(CONFIG_eLIA) || \
+      defined(CONFIG_SECUREEDGEMP3) || defined(CONFIG_CLEOPATRA)
+#define HARD_RESET_NOW() ({		\
+        asm("				\
+	movew #0x2700, %sr;		\
+	moveal #0x10000044, %a0;	\
+	movel #0xffffffff, (%a0);	\
+	moveal #0x10000001, %a0;	\
+	moveb #0x00, (%a0);		\
+        moveal #0xf0000004, %a0;	\
+        moveal (%a0), %a0;		\
+        jmp (%a0);			\
+        ");				\
+})
+#elif defined(CONFIG_M5272)
+/*
+ * Retrieve the boot address in flash using CSBR0 and CSOR0
+ * find the reset vector at flash_address + 4 (e.g. 0x400)
+ * remap it in the flash's current location (e.g. 0xf0000400)
+ * and jump there.
+ */ 
+#define HARD_RESET_NOW() ({		\
+	asm("				\
+	movew #0x2700, %%sr;		\
+	move.l	%0+0x40,%%d0;		\
+	and.l	%0+0x44,%%d0;		\
+	andi.l	#0xfffff000,%%d0;	\
+	mov.l	%%d0,%%a0;		\
+	or.l	4(%%a0),%%d0;		\
+	mov.l	%%d0,%%a0;		\
+	jmp (%%a0);"			\
+	: /* No output */		\
+	: "o" (*(char *)MCF_MBAR) );	\
+})
+#elif defined(CONFIG_M528x)
+/*
+ * The MCF528x has a bit (SOFTRST) in memory (Reset Control Register RCR),
+ * that when set, resets the MCF528x.
+ */
+#define HARD_RESET_NOW() \
+({						\
+	unsigned char volatile *reset;		\
+	asm("move.w	#0x2700, %sr");		\
+	reset = ((volatile unsigned char *)(MCF_IPSBAR + 0x110000));	\
+	while(1)				\
+	*reset |= (0x01 << 7);\
+})
+#elif defined(CONFIG_M523x)
+#define HARD_RESET_NOW() ({		\
+	asm("				\
+	movew #0x2700, %sr;		\
+	movel #0x01000000, %sp;		\
+	moveal #0x40110000, %a0;	\
+	moveb #0x80, (%a0);		\
+	");				\
+})
+#elif defined(CONFIG_M520x)
+	/*
+	 * The MCF5208 has a bit (SOFTRST) in memory (Reset Control Register 
+	 * RCR), that when set, resets the MCF5208.
+	 */
+#define HARD_RESET_NOW() 		\
+({					\
+	unsigned char volatile *reset;	\
+	asm("move.w     #0x2700, %sr");	\
+	reset = ((volatile unsigned char *)(MCF_IPSBAR + 0xA0000));	\
+	while(1)			\
+		*reset |= 0x80;		\
+})
+#else
+#define HARD_RESET_NOW() ({		\
+        asm("				\
+	movew #0x2700, %sr;		\
+        moveal #0x4, %a0;		\
+        moveal (%a0), %a0;		\
+        jmp (%a0);			\
+        ");				\
+})
+#endif
+#endif
+#define arch_align_stack(x) (x)
+
+
+static inline int irqs_disabled_flags(unsigned long flags)
+{
+	if (flags & 0x0700)
+		return 0;
+	else
+		return 1;
+}
+
+#endif /* _M68KNOMMU_SYSTEM_H */
diff --git a/arch/m68knommu/include/asm/termbits.h b/arch/m68knommu/include/asm/termbits.h
new file mode 100644
index 00000000000..05dd6bc2728
--- /dev/null
+++ b/arch/m68knommu/include/asm/termbits.h
@@ -0,0 +1 @@
+#include <asm-m68k/termbits.h>
diff --git a/arch/m68knommu/include/asm/termios.h b/arch/m68knommu/include/asm/termios.h
new file mode 100644
index 00000000000..e7337881a98
--- /dev/null
+++ b/arch/m68knommu/include/asm/termios.h
@@ -0,0 +1 @@
+#include <asm-m68k/termios.h>
diff --git a/arch/m68knommu/include/asm/thread_info.h b/arch/m68knommu/include/asm/thread_info.h
new file mode 100644
index 00000000000..0c9bc095f3f
--- /dev/null
+++ b/arch/m68knommu/include/asm/thread_info.h
@@ -0,0 +1,98 @@
+/* thread_info.h: m68knommu low-level thread information
+ * adapted from the i386 and PPC versions by Greg Ungerer (gerg@snapgear.com)
+ *
+ * Copyright (C) 2002  David Howells (dhowells@redhat.com)
+ * - Incorporating suggestions made by Linus Torvalds and Dave Miller
+ */
+
+#ifndef _ASM_THREAD_INFO_H
+#define _ASM_THREAD_INFO_H
+
+#include <asm/page.h>
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Size of kernel stack for each process. This must be a power of 2...
+ */
+#ifdef CONFIG_4KSTACKS
+#define THREAD_SIZE_ORDER (0)
+#else
+#define THREAD_SIZE_ORDER (1)
+#endif
+                                                                                
+/*
+ * for asm files, THREAD_SIZE is now generated by asm-offsets.c
+ */
+#define THREAD_SIZE (PAGE_SIZE<<THREAD_SIZE_ORDER)
+
+/*
+ * low level task data.
+ */
+struct thread_info {
+	struct task_struct *task;		/* main task structure */
+	struct exec_domain *exec_domain;	/* execution domain */
+	unsigned long	   flags;		/* low level flags */
+	int		   cpu;			/* cpu we're on */
+	int		   preempt_count;	/* 0 => preemptable, <0 => BUG */
+	struct restart_block restart_block;
+};
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ */
+#define INIT_THREAD_INFO(tsk)			\
+{						\
+	.task		= &tsk,			\
+	.exec_domain	= &default_exec_domain,	\
+	.flags		= 0,			\
+	.cpu		= 0,			\
+	.restart_block	= {			\
+		.fn = do_no_restart_syscall,	\
+	},					\
+}
+
+#define init_thread_info	(init_thread_union.thread_info)
+#define init_stack		(init_thread_union.stack)
+
+
+/* how to get the thread information struct from C */
+static inline struct thread_info *current_thread_info(void)
+{
+	struct thread_info *ti;
+	__asm__(
+		"move.l	%%sp, %0 \n\t"
+		"and.l	%1, %0"
+		: "=&d"(ti)
+		: "di" (~(THREAD_SIZE-1))
+		);
+	return ti;
+}
+
+#endif /* __ASSEMBLY__ */
+
+#define	PREEMPT_ACTIVE	0x4000000
+
+/*
+ * thread information flag bit numbers
+ */
+#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
+#define TIF_SIGPENDING		1	/* signal pending */
+#define TIF_NEED_RESCHED	2	/* rescheduling necessary */
+#define TIF_POLLING_NRFLAG	3	/* true if poll_idle() is polling
+					   TIF_NEED_RESCHED */
+#define TIF_MEMDIE		4
+
+/* as above, but as bit values */
+#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
+#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
+#define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
+
+#define _TIF_WORK_MASK		0x0000FFFE	/* work to do on interrupt/exception return */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_THREAD_INFO_H */
diff --git a/arch/m68knommu/include/asm/timex.h b/arch/m68knommu/include/asm/timex.h
new file mode 100644
index 00000000000..109050f3fe9
--- /dev/null
+++ b/arch/m68knommu/include/asm/timex.h
@@ -0,0 +1,23 @@
+/*
+ * linux/include/asm-m68knommu/timex.h
+ *
+ * m68knommu architecture timex specifications
+ */
+#ifndef _ASM_M68KNOMMU_TIMEX_H
+#define _ASM_M68KNOMMU_TIMEX_H
+
+#ifdef CONFIG_COLDFIRE
+#include <asm/coldfire.h>
+#define CLOCK_TICK_RATE	MCF_CLK
+#else
+#define CLOCK_TICK_RATE	1193180 /* Underlying HZ */
+#endif
+
+typedef unsigned long cycles_t;
+
+static inline cycles_t get_cycles(void)
+{
+	return 0;
+}
+
+#endif
diff --git a/arch/m68knommu/include/asm/tlb.h b/arch/m68knommu/include/asm/tlb.h
new file mode 100644
index 00000000000..77a7c51ca29
--- /dev/null
+++ b/arch/m68knommu/include/asm/tlb.h
@@ -0,0 +1 @@
+#include <asm-m68k/tlb.h>
diff --git a/arch/m68knommu/include/asm/tlbflush.h b/arch/m68knommu/include/asm/tlbflush.h
new file mode 100644
index 00000000000..a470cfb803e
--- /dev/null
+++ b/arch/m68knommu/include/asm/tlbflush.h
@@ -0,0 +1,55 @@
+#ifndef _M68KNOMMU_TLBFLUSH_H
+#define _M68KNOMMU_TLBFLUSH_H
+
+/*
+ * Copyright (C) 2000 Lineo, David McCullough <davidm@uclinux.org>
+ * Copyright (C) 2000-2002, Greg Ungerer <gerg@snapgear.com>
+ */
+
+#include <asm/setup.h>
+
+/*
+ * flush all user-space atc entries.
+ */
+static inline void __flush_tlb(void)
+{
+	BUG();
+}
+
+static inline void __flush_tlb_one(unsigned long addr)
+{
+	BUG();
+}
+
+#define flush_tlb() __flush_tlb()
+
+/*
+ * flush all atc entries (both kernel and user-space entries).
+ */
+static inline void flush_tlb_all(void)
+{
+	BUG();
+}
+
+static inline void flush_tlb_mm(struct mm_struct *mm)
+{
+	BUG();
+}
+
+static inline void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)
+{
+	BUG();
+}
+
+static inline void flush_tlb_range(struct mm_struct *mm,
+				   unsigned long start, unsigned long end)
+{
+	BUG();
+}
+
+static inline void flush_tlb_kernel_page(unsigned long addr)
+{
+	BUG();
+}
+
+#endif /* _M68KNOMMU_TLBFLUSH_H */
diff --git a/arch/m68knommu/include/asm/topology.h b/arch/m68knommu/include/asm/topology.h
new file mode 100644
index 00000000000..ca173e9f26f
--- /dev/null
+++ b/arch/m68knommu/include/asm/topology.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_M68K_TOPOLOGY_H
+#define _ASM_M68K_TOPOLOGY_H
+
+#include <asm-generic/topology.h>
+
+#endif /* _ASM_M68K_TOPOLOGY_H */
diff --git a/arch/m68knommu/include/asm/traps.h b/arch/m68knommu/include/asm/traps.h
new file mode 100644
index 00000000000..d0671e5f8e2
--- /dev/null
+++ b/arch/m68knommu/include/asm/traps.h
@@ -0,0 +1,154 @@
+/*
+ *  linux/include/asm/traps.h
+ *
+ *  Copyright (C) 1993        Hamish Macdonald
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _M68KNOMMU_TRAPS_H
+#define _M68KNOMMU_TRAPS_H
+
+#ifndef __ASSEMBLY__
+
+typedef void (*e_vector)(void);
+
+extern e_vector vectors[];
+extern void init_vectors(void);
+extern void enable_vector(unsigned int irq);
+extern void disable_vector(unsigned int irq);
+extern void ack_vector(unsigned int irq);
+
+#endif
+
+#define VEC_BUSERR  (2)
+#define VEC_ADDRERR (3)
+#define VEC_ILLEGAL (4)
+#define VEC_ZERODIV (5)
+#define VEC_CHK     (6)
+#define VEC_TRAP    (7)
+#define VEC_PRIV    (8)
+#define VEC_TRACE   (9)
+#define VEC_LINE10  (10)
+#define VEC_LINE11  (11)
+#define VEC_RESV1   (12)
+#define VEC_COPROC  (13)
+#define VEC_FORMAT  (14)
+#define VEC_UNINT   (15)
+#define VEC_SPUR    (24)
+#define VEC_INT1    (25)
+#define VEC_INT2    (26)
+#define VEC_INT3    (27)
+#define VEC_INT4    (28)
+#define VEC_INT5    (29)
+#define VEC_INT6    (30)
+#define VEC_INT7    (31)
+#define VEC_SYS     (32)
+#define VEC_TRAP1   (33)
+#define VEC_TRAP2   (34)
+#define VEC_TRAP3   (35)
+#define VEC_TRAP4   (36)
+#define VEC_TRAP5   (37)
+#define VEC_TRAP6   (38)
+#define VEC_TRAP7   (39)
+#define VEC_TRAP8   (40)
+#define VEC_TRAP9   (41)
+#define VEC_TRAP10  (42)
+#define VEC_TRAP11  (43)
+#define VEC_TRAP12  (44)
+#define VEC_TRAP13  (45)
+#define VEC_TRAP14  (46)
+#define VEC_TRAP15  (47)
+#define VEC_FPBRUC  (48)
+#define VEC_FPIR    (49)
+#define VEC_FPDIVZ  (50)
+#define VEC_FPUNDER (51)
+#define VEC_FPOE    (52)
+#define VEC_FPOVER  (53)
+#define VEC_FPNAN   (54)
+#define VEC_FPUNSUP (55)
+#define	VEC_UNIMPEA (60)
+#define	VEC_UNIMPII (61)
+#define VEC_USER    (64)
+
+#define VECOFF(vec) ((vec)<<2)
+
+#ifndef __ASSEMBLY__
+
+/* Status register bits */
+#define PS_T  (0x8000)
+#define PS_S  (0x2000)
+#define PS_M  (0x1000)
+#define PS_C  (0x0001)
+
+/* structure for stack frames */
+
+struct frame {
+    struct pt_regs ptregs;
+    union {
+	    struct {
+		    unsigned long  iaddr;    /* instruction address */
+	    } fmt2;
+	    struct {
+		    unsigned long  effaddr;  /* effective address */
+	    } fmt3;
+	    struct {
+		    unsigned long  effaddr;  /* effective address */
+		    unsigned long  pc;	     /* pc of faulted instr */
+	    } fmt4;
+	    struct {
+		    unsigned long  effaddr;  /* effective address */
+		    unsigned short ssw;      /* special status word */
+		    unsigned short wb3s;     /* write back 3 status */
+		    unsigned short wb2s;     /* write back 2 status */
+		    unsigned short wb1s;     /* write back 1 status */
+		    unsigned long  faddr;    /* fault address */
+		    unsigned long  wb3a;     /* write back 3 address */
+		    unsigned long  wb3d;     /* write back 3 data */
+		    unsigned long  wb2a;     /* write back 2 address */
+		    unsigned long  wb2d;     /* write back 2 data */
+		    unsigned long  wb1a;     /* write back 1 address */
+		    unsigned long  wb1dpd0;  /* write back 1 data/push data 0*/
+		    unsigned long  pd1;      /* push data 1*/
+		    unsigned long  pd2;      /* push data 2*/
+		    unsigned long  pd3;      /* push data 3*/
+	    } fmt7;
+	    struct {
+		    unsigned long  iaddr;    /* instruction address */
+		    unsigned short int1[4];  /* internal registers */
+	    } fmt9;
+	    struct {
+		    unsigned short int1;
+		    unsigned short ssw;      /* special status word */
+		    unsigned short isc;      /* instruction stage c */
+		    unsigned short isb;      /* instruction stage b */
+		    unsigned long  daddr;    /* data cycle fault address */
+		    unsigned short int2[2];
+		    unsigned long  dobuf;    /* data cycle output buffer */
+		    unsigned short int3[2];
+	    } fmta;
+	    struct {
+		    unsigned short int1;
+		    unsigned short ssw;     /* special status word */
+		    unsigned short isc;     /* instruction stage c */
+		    unsigned short isb;     /* instruction stage b */
+		    unsigned long  daddr;   /* data cycle fault address */
+		    unsigned short int2[2];
+		    unsigned long  dobuf;   /* data cycle output buffer */
+		    unsigned short int3[4];
+		    unsigned long  baddr;   /* stage B address */
+		    unsigned short int4[2];
+		    unsigned long  dibuf;   /* data cycle input buffer */
+		    unsigned short int5[3];
+		    unsigned	   ver : 4; /* stack frame version # */
+		    unsigned	   int6:12;
+		    unsigned short int7[18];
+	    } fmtb;
+    } un;
+};
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _M68KNOMMU_TRAPS_H */
diff --git a/arch/m68knommu/include/asm/types.h b/arch/m68knommu/include/asm/types.h
new file mode 100644
index 00000000000..031238c2d18
--- /dev/null
+++ b/arch/m68knommu/include/asm/types.h
@@ -0,0 +1 @@
+#include <asm-m68k/types.h>
diff --git a/arch/m68knommu/include/asm/uaccess.h b/arch/m68knommu/include/asm/uaccess.h
new file mode 100644
index 00000000000..68bbe9b312f
--- /dev/null
+++ b/arch/m68knommu/include/asm/uaccess.h
@@ -0,0 +1,181 @@
+#ifndef __M68KNOMMU_UACCESS_H
+#define __M68KNOMMU_UACCESS_H
+
+/*
+ * User space memory access functions
+ */
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/string.h>
+
+#include <asm/segment.h>
+
+#define VERIFY_READ	0
+#define VERIFY_WRITE	1
+
+#define access_ok(type,addr,size)	_access_ok((unsigned long)(addr),(size))
+
+/*
+ * It is not enough to just have access_ok check for a real RAM address.
+ * This would disallow the case of code/ro-data running XIP in flash/rom.
+ * Ideally we would check the possible flash ranges too, but that is
+ * currently not so easy.
+ */
+static inline int _access_ok(unsigned long addr, unsigned long size)
+{
+	return 1;
+}
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue.  No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry
+{
+	unsigned long insn, fixup;
+};
+
+/* Returns 0 if exception not found and fixup otherwise.  */
+extern unsigned long search_exception_table(unsigned long);
+
+
+/*
+ * These are the main single-value transfer routines.  They automatically
+ * use the right size if we just have the right pointer type.
+ */
+
+#define put_user(x, ptr)				\
+({							\
+    int __pu_err = 0;					\
+    typeof(*(ptr)) __pu_val = (x);			\
+    switch (sizeof (*(ptr))) {				\
+    case 1:						\
+	__put_user_asm(__pu_err, __pu_val, ptr, b);	\
+	break;						\
+    case 2:						\
+	__put_user_asm(__pu_err, __pu_val, ptr, w);	\
+	break;						\
+    case 4:						\
+	__put_user_asm(__pu_err, __pu_val, ptr, l);	\
+	break;						\
+    case 8:						\
+	memcpy(ptr, &__pu_val, sizeof (*(ptr))); \
+	break;						\
+    default:						\
+	__pu_err = __put_user_bad();			\
+	break;						\
+    }							\
+    __pu_err;						\
+})
+#define __put_user(x, ptr) put_user(x, ptr)
+
+extern int __put_user_bad(void);
+
+/*
+ * Tell gcc we read from memory instead of writing: this is because
+ * we do not write to any memory gcc knows about, so there are no
+ * aliasing issues.
+ */
+
+#define __ptr(x) ((unsigned long *)(x))
+
+#define __put_user_asm(err,x,ptr,bwl)				\
+	__asm__ ("move" #bwl " %0,%1"				\
+		: /* no outputs */						\
+		:"d" (x),"m" (*__ptr(ptr)) : "memory")
+
+#define get_user(x, ptr)					\
+({								\
+    int __gu_err = 0;						\
+    typeof(x) __gu_val = 0;					\
+    switch (sizeof(*(ptr))) {					\
+    case 1:							\
+	__get_user_asm(__gu_err, __gu_val, ptr, b, "=d");	\
+	break;							\
+    case 2:							\
+	__get_user_asm(__gu_err, __gu_val, ptr, w, "=r");	\
+	break;							\
+    case 4:							\
+	__get_user_asm(__gu_err, __gu_val, ptr, l, "=r");	\
+	break;							\
+    case 8:							\
+	memcpy((void *) &__gu_val, ptr, sizeof (*(ptr)));	\
+	break;							\
+    default:							\
+	__gu_val = 0;						\
+	__gu_err = __get_user_bad();				\
+	break;							\
+    }								\
+    (x) = (typeof(*(ptr))) __gu_val;				\
+    __gu_err;							\
+})
+#define __get_user(x, ptr) get_user(x, ptr)
+
+extern int __get_user_bad(void);
+
+#define __get_user_asm(err,x,ptr,bwl,reg)			\
+	__asm__ ("move" #bwl " %1,%0"				\
+		 : "=d" (x)					\
+		 : "m" (*__ptr(ptr)))
+
+#define copy_from_user(to, from, n)		(memcpy(to, from, n), 0)
+#define copy_to_user(to, from, n)		(memcpy(to, from, n), 0)
+
+#define __copy_from_user(to, from, n) copy_from_user(to, from, n)
+#define __copy_to_user(to, from, n) copy_to_user(to, from, n)
+#define __copy_to_user_inatomic __copy_to_user
+#define __copy_from_user_inatomic __copy_from_user
+
+#define copy_to_user_ret(to,from,n,retval) ({ if (copy_to_user(to,from,n)) return retval; })
+
+#define copy_from_user_ret(to,from,n,retval) ({ if (copy_from_user(to,from,n)) return retval; })
+
+/*
+ * Copy a null terminated string from userspace.
+ */
+
+static inline long
+strncpy_from_user(char *dst, const char *src, long count)
+{
+	char *tmp;
+	strncpy(dst, src, count);
+	for (tmp = dst; *tmp && count > 0; tmp++, count--)
+		;
+	return(tmp - dst); /* DAVIDM should we count a NUL ?  check getname */
+}
+
+/*
+ * Return the size of a string (including the ending 0)
+ *
+ * Return 0 on exception, a value greater than N if too long
+ */
+static inline long strnlen_user(const char *src, long n)
+{
+	return(strlen(src) + 1); /* DAVIDM make safer */
+}
+
+#define strlen_user(str) strnlen_user(str, 32767)
+
+/*
+ * Zero Userspace
+ */
+
+static inline unsigned long
+__clear_user(void *to, unsigned long n)
+{
+	memset(to, 0, n);
+	return 0;
+}
+
+#define	clear_user(to,n)	__clear_user(to,n)
+
+#endif /* _M68KNOMMU_UACCESS_H */
diff --git a/arch/m68knommu/include/asm/ucontext.h b/arch/m68knommu/include/asm/ucontext.h
new file mode 100644
index 00000000000..713a27f901c
--- /dev/null
+++ b/arch/m68knommu/include/asm/ucontext.h
@@ -0,0 +1,32 @@
+#ifndef _M68KNOMMU_UCONTEXT_H
+#define _M68KNOMMU_UCONTEXT_H
+
+typedef int greg_t;
+#define NGREG 18
+typedef greg_t gregset_t[NGREG];
+
+typedef struct fpregset {
+	int f_pcr;
+	int f_psr;
+	int f_fpiaddr;
+	int f_fpregs[8][3];
+} fpregset_t;
+
+struct mcontext {
+	int version;
+	gregset_t gregs;
+	fpregset_t fpregs;
+};
+
+#define MCONTEXT_VERSION 2
+
+struct ucontext {
+	unsigned long	  uc_flags;
+	struct ucontext  *uc_link;
+	stack_t		  uc_stack;
+	struct mcontext	  uc_mcontext;
+	unsigned long	  uc_filler[80];
+	sigset_t	  uc_sigmask;	/* mask last for extensibility */
+};
+
+#endif
diff --git a/arch/m68knommu/include/asm/unaligned.h b/arch/m68knommu/include/asm/unaligned.h
new file mode 100644
index 00000000000..eb1ea4cb9a5
--- /dev/null
+++ b/arch/m68knommu/include/asm/unaligned.h
@@ -0,0 +1,25 @@
+#ifndef _ASM_M68KNOMMU_UNALIGNED_H
+#define _ASM_M68KNOMMU_UNALIGNED_H
+
+
+#ifdef CONFIG_COLDFIRE
+#include <linux/unaligned/be_struct.h>
+#include <linux/unaligned/le_byteshift.h>
+#include <linux/unaligned/generic.h>
+
+#define get_unaligned	__get_unaligned_be
+#define put_unaligned	__put_unaligned_be
+
+#else
+/*
+ * The m68k can do unaligned accesses itself. 
+ */
+#include <linux/unaligned/access_ok.h>
+#include <linux/unaligned/generic.h>
+
+#define get_unaligned	__get_unaligned_be
+#define put_unaligned	__put_unaligned_be
+
+#endif
+
+#endif /* _ASM_M68KNOMMU_UNALIGNED_H */
diff --git a/arch/m68knommu/include/asm/unistd.h b/arch/m68knommu/include/asm/unistd.h
new file mode 100644
index 00000000000..b034a2f7b44
--- /dev/null
+++ b/arch/m68knommu/include/asm/unistd.h
@@ -0,0 +1,372 @@
+#ifndef _ASM_M68K_UNISTD_H_
+#define _ASM_M68K_UNISTD_H_
+
+/*
+ * This file contains the system call numbers.
+ */
+
+#define __NR_restart_syscall      0
+#define __NR_exit		  1
+#define __NR_fork		  2
+#define __NR_read		  3
+#define __NR_write		  4
+#define __NR_open		  5
+#define __NR_close		  6
+#define __NR_waitpid		  7
+#define __NR_creat		  8
+#define __NR_link		  9
+#define __NR_unlink		 10
+#define __NR_execve		 11
+#define __NR_chdir		 12
+#define __NR_time		 13
+#define __NR_mknod		 14
+#define __NR_chmod		 15
+#define __NR_chown		 16
+#define __NR_break		 17
+#define __NR_oldstat		 18
+#define __NR_lseek		 19
+#define __NR_getpid		 20
+#define __NR_mount		 21
+#define __NR_umount		 22
+#define __NR_setuid		 23
+#define __NR_getuid		 24
+#define __NR_stime		 25
+#define __NR_ptrace		 26
+#define __NR_alarm		 27
+#define __NR_oldfstat		 28
+#define __NR_pause		 29
+#define __NR_utime		 30
+#define __NR_stty		 31
+#define __NR_gtty		 32
+#define __NR_access		 33
+#define __NR_nice		 34
+#define __NR_ftime		 35
+#define __NR_sync		 36
+#define __NR_kill		 37
+#define __NR_rename		 38
+#define __NR_mkdir		 39
+#define __NR_rmdir		 40
+#define __NR_dup		 41
+#define __NR_pipe		 42
+#define __NR_times		 43
+#define __NR_prof		 44
+#define __NR_brk		 45
+#define __NR_setgid		 46
+#define __NR_getgid		 47
+#define __NR_signal		 48
+#define __NR_geteuid		 49
+#define __NR_getegid		 50
+#define __NR_acct		 51
+#define __NR_umount2		 52
+#define __NR_lock		 53
+#define __NR_ioctl		 54
+#define __NR_fcntl		 55
+#define __NR_mpx		 56
+#define __NR_setpgid		 57
+#define __NR_ulimit		 58
+#define __NR_oldolduname	 59
+#define __NR_umask		 60
+#define __NR_chroot		 61
+#define __NR_ustat		 62
+#define __NR_dup2		 63
+#define __NR_getppid		 64
+#define __NR_getpgrp		 65
+#define __NR_setsid		 66
+#define __NR_sigaction		 67
+#define __NR_sgetmask		 68
+#define __NR_ssetmask		 69
+#define __NR_setreuid		 70
+#define __NR_setregid		 71
+#define __NR_sigsuspend		 72
+#define __NR_sigpending		 73
+#define __NR_sethostname	 74
+#define __NR_setrlimit		 75
+#define __NR_getrlimit		 76
+#define __NR_getrusage		 77
+#define __NR_gettimeofday	 78
+#define __NR_settimeofday	 79
+#define __NR_getgroups		 80
+#define __NR_setgroups		 81
+#define __NR_select		 82
+#define __NR_symlink		 83
+#define __NR_oldlstat		 84
+#define __NR_readlink		 85
+#define __NR_uselib		 86
+#define __NR_swapon		 87
+#define __NR_reboot		 88
+#define __NR_readdir		 89
+#define __NR_mmap		 90
+#define __NR_munmap		 91
+#define __NR_truncate		 92
+#define __NR_ftruncate		 93
+#define __NR_fchmod		 94
+#define __NR_fchown		 95
+#define __NR_getpriority	 96
+#define __NR_setpriority	 97
+#define __NR_profil		 98
+#define __NR_statfs		 99
+#define __NR_fstatfs		100
+#define __NR_ioperm		101
+#define __NR_socketcall		102
+#define __NR_syslog		103
+#define __NR_setitimer		104
+#define __NR_getitimer		105
+#define __NR_stat		106
+#define __NR_lstat		107
+#define __NR_fstat		108
+#define __NR_olduname		109
+#define __NR_iopl		/* 110 */ not supported
+#define __NR_vhangup		111
+#define __NR_idle		/* 112 */ Obsolete
+#define __NR_vm86		/* 113 */ not supported
+#define __NR_wait4		114
+#define __NR_swapoff		115
+#define __NR_sysinfo		116
+#define __NR_ipc		117
+#define __NR_fsync		118
+#define __NR_sigreturn		119
+#define __NR_clone		120
+#define __NR_setdomainname	121
+#define __NR_uname		122
+#define __NR_cacheflush		123
+#define __NR_adjtimex		124
+#define __NR_mprotect		125
+#define __NR_sigprocmask	126
+#define __NR_create_module	127
+#define __NR_init_module	128
+#define __NR_delete_module	129
+#define __NR_get_kernel_syms	130
+#define __NR_quotactl		131
+#define __NR_getpgid		132
+#define __NR_fchdir		133
+#define __NR_bdflush		134
+#define __NR_sysfs		135
+#define __NR_personality	136
+#define __NR_afs_syscall	137 /* Syscall for Andrew File System */
+#define __NR_setfsuid		138
+#define __NR_setfsgid		139
+#define __NR__llseek		140
+#define __NR_getdents		141
+#define __NR__newselect		142
+#define __NR_flock		143
+#define __NR_msync		144
+#define __NR_readv		145
+#define __NR_writev		146
+#define __NR_getsid		147
+#define __NR_fdatasync		148
+#define __NR__sysctl		149
+#define __NR_mlock		150
+#define __NR_munlock		151
+#define __NR_mlockall		152
+#define __NR_munlockall		153
+#define __NR_sched_setparam		154
+#define __NR_sched_getparam		155
+#define __NR_sched_setscheduler		156
+#define __NR_sched_getscheduler		157
+#define __NR_sched_yield		158
+#define __NR_sched_get_priority_max	159
+#define __NR_sched_get_priority_min	160
+#define __NR_sched_rr_get_interval	161
+#define __NR_nanosleep		162
+#define __NR_mremap		163
+#define __NR_setresuid		164
+#define __NR_getresuid		165
+#define __NR_getpagesize	166
+#define __NR_query_module	167
+#define __NR_poll		168
+#define __NR_nfsservctl		169
+#define __NR_setresgid		170
+#define __NR_getresgid		171
+#define __NR_prctl		172
+#define __NR_rt_sigreturn	173
+#define __NR_rt_sigaction	174
+#define __NR_rt_sigprocmask	175
+#define __NR_rt_sigpending	176
+#define __NR_rt_sigtimedwait	177
+#define __NR_rt_sigqueueinfo	178
+#define __NR_rt_sigsuspend	179
+#define __NR_pread64		180
+#define __NR_pwrite64		181
+#define __NR_lchown		182
+#define __NR_getcwd		183
+#define __NR_capget		184
+#define __NR_capset		185
+#define __NR_sigaltstack	186
+#define __NR_sendfile		187
+#define __NR_getpmsg		188	/* some people actually want streams */
+#define __NR_putpmsg		189	/* some people actually want streams */
+#define __NR_vfork		190
+#define __NR_ugetrlimit		191
+#define __NR_mmap2		192
+#define __NR_truncate64		193
+#define __NR_ftruncate64	194
+#define __NR_stat64		195
+#define __NR_lstat64		196
+#define __NR_fstat64		197
+#define __NR_chown32		198
+#define __NR_getuid32		199
+#define __NR_getgid32		200
+#define __NR_geteuid32		201
+#define __NR_getegid32		202
+#define __NR_setreuid32		203
+#define __NR_setregid32		204
+#define __NR_getgroups32	205
+#define __NR_setgroups32	206
+#define __NR_fchown32		207
+#define __NR_setresuid32	208
+#define __NR_getresuid32	209
+#define __NR_setresgid32	210
+#define __NR_getresgid32	211
+#define __NR_lchown32		212
+#define __NR_setuid32		213
+#define __NR_setgid32		214
+#define __NR_setfsuid32		215
+#define __NR_setfsgid32		216
+#define __NR_pivot_root		217
+#define __NR_getdents64		220
+#define __NR_gettid		221
+#define __NR_tkill		222
+#define __NR_setxattr		223
+#define __NR_lsetxattr		224
+#define __NR_fsetxattr		225
+#define __NR_getxattr		226
+#define __NR_lgetxattr		227
+#define __NR_fgetxattr		228
+#define __NR_listxattr		229
+#define __NR_llistxattr		230
+#define __NR_flistxattr		231
+#define __NR_removexattr	232
+#define __NR_lremovexattr	233
+#define __NR_fremovexattr	234
+#define __NR_futex		235
+#define __NR_sendfile64		236
+#define __NR_mincore		237
+#define __NR_madvise		238
+#define __NR_fcntl64		239
+#define __NR_readahead		240
+#define __NR_io_setup		241
+#define __NR_io_destroy		242
+#define __NR_io_getevents	243
+#define __NR_io_submit		244
+#define __NR_io_cancel		245
+#define __NR_fadvise64		246
+#define __NR_exit_group		247
+#define __NR_lookup_dcookie	248
+#define __NR_epoll_create	249
+#define __NR_epoll_ctl		250
+#define __NR_epoll_wait		251
+#define __NR_remap_file_pages	252
+#define __NR_set_tid_address	253
+#define __NR_timer_create	254
+#define __NR_timer_settime	255
+#define __NR_timer_gettime	256
+#define __NR_timer_getoverrun	257
+#define __NR_timer_delete	258
+#define __NR_clock_settime	259
+#define __NR_clock_gettime	260
+#define __NR_clock_getres	261
+#define __NR_clock_nanosleep	262
+#define __NR_statfs64		263
+#define __NR_fstatfs64		264
+#define __NR_tgkill		265
+#define __NR_utimes		266
+#define __NR_fadvise64_64	267
+#define __NR_mbind		268
+#define __NR_get_mempolicy	269
+#define __NR_set_mempolicy	270
+#define __NR_mq_open		271
+#define __NR_mq_unlink		272
+#define __NR_mq_timedsend	273
+#define __NR_mq_timedreceive	274
+#define __NR_mq_notify		275
+#define __NR_mq_getsetattr	276
+#define __NR_waitid		277
+#define __NR_vserver		278
+#define __NR_add_key		279
+#define __NR_request_key	280
+#define __NR_keyctl		281
+#define __NR_ioprio_set		282
+#define __NR_ioprio_get		283
+#define __NR_inotify_init	284
+#define __NR_inotify_add_watch	285
+#define __NR_inotify_rm_watch	286
+#define __NR_migrate_pages	287
+#define __NR_openat		288
+#define __NR_mkdirat		289
+#define __NR_mknodat		290
+#define __NR_fchownat		291
+#define __NR_futimesat		292
+#define __NR_fstatat64		293
+#define __NR_unlinkat		294
+#define __NR_renameat		295
+#define __NR_linkat		296
+#define __NR_symlinkat		297
+#define __NR_readlinkat		298
+#define __NR_fchmodat		299
+#define __NR_faccessat		300
+#define __NR_pselect6		301
+#define __NR_ppoll		302
+#define __NR_unshare		303
+#define __NR_set_robust_list	304
+#define __NR_get_robust_list	305
+#define __NR_splice		306
+#define __NR_sync_file_range	307
+#define __NR_tee		308
+#define __NR_vmsplice		309
+#define __NR_move_pages		310
+#define __NR_sched_setaffinity	311
+#define __NR_sched_getaffinity	312
+#define __NR_kexec_load		313
+#define __NR_getcpu		314
+#define __NR_epoll_pwait	315
+#define __NR_utimensat		316
+#define __NR_signalfd		317
+#define __NR_timerfd_create	318
+#define __NR_eventfd		319
+#define __NR_fallocate		320
+#define __NR_timerfd_settime	321
+#define __NR_timerfd_gettime	322
+#define __NR_signalfd4		323
+#define __NR_eventfd2		324
+#define __NR_epoll_create1	325
+#define __NR_dup3		326
+#define __NR_pipe2		327
+#define __NR_inotify_init1	328
+
+#ifdef __KERNEL__
+
+#define NR_syscalls		329
+
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_OLD_STAT
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_M68K_UNISTD_H_ */
diff --git a/arch/m68knommu/include/asm/user.h b/arch/m68knommu/include/asm/user.h
new file mode 100644
index 00000000000..a5a555b761c
--- /dev/null
+++ b/arch/m68knommu/include/asm/user.h
@@ -0,0 +1 @@
+#include <asm-m68k/user.h>