Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

2 files changed, 140 insertions, 0 deletions

diff --git a/arch/m68knommu/platform/5206e/Makefile b/arch/m68knommu/platform/5206e/Makefile
new file mode 100644
index 00000000000..701b7abe019
--- /dev/null
+++ b/arch/m68knommu/platform/5206e/Makefile
@@ -0,0 +1,20 @@
+#
+# Makefile for the m68knommu linux kernel.
+#
+
+#
+# If you want to play with the HW breakpoints then you will
+# need to add define this,  which will give you a stack backtrace
+# on the console port whenever a DBG interrupt occurs.  You have to
+# set up you HW breakpoints to trigger a DBG interrupt:
+#
+# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT
+# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT
+#
+
+ifdef CONFIG_FULLDEBUG
+AFLAGS += -DDEBUGGER_COMPATIBLE_CACHE=1
+endif
+
+obj-y := config.o
+
diff --git a/arch/m68knommu/platform/5206e/config.c b/arch/m68knommu/platform/5206e/config.c
new file mode 100644
index 00000000000..f35b8606c1e
--- /dev/null
+++ b/arch/m68knommu/platform/5206e/config.c
@@ -0,0 +1,120 @@
+/***************************************************************************/
+
+/*
+ *	linux/arch/m68knommu/platform/5206e/config.c
+ *
+ *	Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com)
+ */
+
+/***************************************************************************/
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/param.h>
+#include <linux/interrupt.h>
+#include <asm/irq.h>
+#include <asm/dma.h>
+#include <asm/traps.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcftimer.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfdma.h>
+#include <asm/irq.h>
+
+/***************************************************************************/
+
+void coldfire_tick(void);
+void coldfire_timer_init(irqreturn_t (*handler)(int, void *, struct pt_regs *));
+unsigned long coldfire_timer_offset(void);
+void coldfire_trap_init(void);
+void coldfire_reset(void);
+
+/***************************************************************************/
+
+/*
+ *	DMA channel base address table.
+ */
+unsigned int   dma_base_addr[MAX_M68K_DMA_CHANNELS] = {
+        MCF_MBAR + MCFDMA_BASE0,
+        MCF_MBAR + MCFDMA_BASE1,
+};
+
+unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS];
+
+/***************************************************************************/
+
+void mcf_autovector(unsigned int vec)
+{
+	volatile unsigned char  *mbar;
+	unsigned char		icr;
+
+	if ((vec >= 25) && (vec <= 31)) {
+		vec -= 25;
+		mbar = (volatile unsigned char *) MCF_MBAR;
+		icr = MCFSIM_ICR_AUTOVEC | (vec << 3);
+		*(mbar + MCFSIM_ICR1 + vec) = icr;
+		vec = 0x1 << (vec + 1);
+		mcf_setimr(mcf_getimr() & ~vec);
+	}
+}
+
+/***************************************************************************/
+
+void mcf_settimericr(unsigned int timer, unsigned int level)
+{
+	volatile unsigned char *icrp;
+	unsigned int icr, imr;
+
+	if (timer <= 2) {
+		switch (timer) {
+		case 2:  icr = MCFSIM_TIMER2ICR; imr = MCFSIM_IMR_TIMER2; break;
+		default: icr = MCFSIM_TIMER1ICR; imr = MCFSIM_IMR_TIMER1; break;
+		}
+
+		icrp = (volatile unsigned char *) (MCF_MBAR + icr);
+		*icrp = MCFSIM_ICR_AUTOVEC | (level << 2) | MCFSIM_ICR_PRI3;
+		mcf_setimr(mcf_getimr() & ~imr);
+	}
+}
+
+/***************************************************************************/
+
+int mcf_timerirqpending(int timer)
+{
+	unsigned int imr = 0;
+
+	switch (timer) {
+	case 1:  imr = MCFSIM_IMR_TIMER1; break;
+	case 2:  imr = MCFSIM_IMR_TIMER2; break;
+	default: break;
+	}
+	return (mcf_getipr() & imr);
+}
+
+/***************************************************************************/
+
+void config_BSP(char *commandp, int size)
+{
+	mcf_setimr(MCFSIM_IMR_MASKALL);
+
+#if defined(CONFIG_BOOTPARAM)
+	strncpy(commandp, CONFIG_BOOTPARAM_STRING, size);
+	commandp[size-1] = 0;
+#elif defined(CONFIG_NETtel)
+	/* Copy command line from FLASH to local buffer... */
+	memcpy(commandp, (char *) 0xf0004000, size);
+	commandp[size-1] = 0;
+#else
+	memset(commandp, 0, size);
+#endif /* CONFIG_NETtel */
+
+	mach_sched_init = coldfire_timer_init;
+	mach_tick = coldfire_tick;
+	mach_gettimeoffset = coldfire_timer_offset;
+	mach_trap_init = coldfire_trap_init;
+	mach_reset = coldfire_reset;
+}
+
+/***************************************************************************/