m68knommu: Coldfire QSPI platform support

Since Grant has added the coldfire-qspi driver to next-spi, here is the
platform support for the parts that have qspi hardware.  This sets up
gpio to do the spi chip select using the default chip select pins; it should
be trivial for boards that require different or additional spi chip selects to
use other gpios as needed.

Signed-off-by: Steven King <sfking@fdwdc.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>

1 files changed, 182 insertions, 0 deletions

diff --git a/arch/m68knommu/platform/527x/config.c b/arch/m68knommu/platform/527x/config.c
index fa51be17283..3d9c35c98b9 100644
--- a/arch/m68knommu/platform/527x/config.c
+++ b/arch/m68knommu/platform/527x/config.c
@@ -16,10 +16,13 @@
 #include <linux/param.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/spi/spi.h>
+#include <linux/gpio.h>
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
 #include <asm/mcfuart.h>
+#include <asm/mcfqspi.h>
 
 /***************************************************************************/
 
@@ -106,12 +109,188 @@ static struct platform_device m527x_fec[] = {
 	},
 };
 
+#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
+static struct resource m527x_qspi_resources[] = {
+	{
+		.start		= MCFQSPI_IOBASE,
+		.end		= MCFQSPI_IOBASE + MCFQSPI_IOSIZE - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= MCFINT_VECBASE + MCFINT_QSPI,
+		.end		= MCFINT_VECBASE + MCFINT_QSPI,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+#if defined(CONFIG_M5271)
+#define MCFQSPI_CS0    91
+#define MCFQSPI_CS1    92
+#define MCFQSPI_CS2    99
+#define MCFQSPI_CS3    103
+#elif defined(CONFIG_M5275)
+#define MCFQSPI_CS0    59
+#define MCFQSPI_CS1    60
+#define MCFQSPI_CS2    61
+#define MCFQSPI_CS3    62
+#endif
+
+static int m527x_cs_setup(struct mcfqspi_cs_control *cs_control)
+{
+	int status;
+
+	status = gpio_request(MCFQSPI_CS0, "MCFQSPI_CS0");
+	if (status) {
+		pr_debug("gpio_request for MCFQSPI_CS0 failed\n");
+		goto fail0;
+	}
+	status = gpio_direction_output(MCFQSPI_CS0, 1);
+	if (status) {
+		pr_debug("gpio_direction_output for MCFQSPI_CS0 failed\n");
+		goto fail1;
+	}
+
+	status = gpio_request(MCFQSPI_CS1, "MCFQSPI_CS1");
+	if (status) {
+		pr_debug("gpio_request for MCFQSPI_CS1 failed\n");
+		goto fail1;
+	}
+	status = gpio_direction_output(MCFQSPI_CS1, 1);
+	if (status) {
+		pr_debug("gpio_direction_output for MCFQSPI_CS1 failed\n");
+		goto fail2;
+	}
+
+	status = gpio_request(MCFQSPI_CS2, "MCFQSPI_CS2");
+	if (status) {
+		pr_debug("gpio_request for MCFQSPI_CS2 failed\n");
+		goto fail2;
+	}
+	status = gpio_direction_output(MCFQSPI_CS2, 1);
+	if (status) {
+		pr_debug("gpio_direction_output for MCFQSPI_CS2 failed\n");
+		goto fail3;
+	}
+
+	status = gpio_request(MCFQSPI_CS3, "MCFQSPI_CS3");
+	if (status) {
+		pr_debug("gpio_request for MCFQSPI_CS3 failed\n");
+		goto fail3;
+	}
+	status = gpio_direction_output(MCFQSPI_CS3, 1);
+	if (status) {
+		pr_debug("gpio_direction_output for MCFQSPI_CS3 failed\n");
+		goto fail4;
+	}
+
+	return 0;
+
+fail4:
+	gpio_free(MCFQSPI_CS3);
+fail3:
+	gpio_free(MCFQSPI_CS2);
+fail2:
+	gpio_free(MCFQSPI_CS1);
+fail1:
+	gpio_free(MCFQSPI_CS0);
+fail0:
+	return status;
+}
+
+static void m527x_cs_teardown(struct mcfqspi_cs_control *cs_control)
+{
+	gpio_free(MCFQSPI_CS3);
+	gpio_free(MCFQSPI_CS2);
+	gpio_free(MCFQSPI_CS1);
+	gpio_free(MCFQSPI_CS0);
+}
+
+static void m527x_cs_select(struct mcfqspi_cs_control *cs_control,
+			    u8 chip_select, bool cs_high)
+{
+	switch (chip_select) {
+	case 0:
+		gpio_set_value(MCFQSPI_CS0, cs_high);
+		break;
+	case 1:
+		gpio_set_value(MCFQSPI_CS1, cs_high);
+		break;
+	case 2:
+		gpio_set_value(MCFQSPI_CS2, cs_high);
+		break;
+	case 3:
+		gpio_set_value(MCFQSPI_CS3, cs_high);
+		break;
+	}
+}
+
+static void m527x_cs_deselect(struct mcfqspi_cs_control *cs_control,
+			      u8 chip_select, bool cs_high)
+{
+	switch (chip_select) {
+	case 0:
+		gpio_set_value(MCFQSPI_CS0, !cs_high);
+		break;
+	case 1:
+		gpio_set_value(MCFQSPI_CS1, !cs_high);
+		break;
+	case 2:
+		gpio_set_value(MCFQSPI_CS2, !cs_high);
+		break;
+	case 3:
+		gpio_set_value(MCFQSPI_CS3, !cs_high);
+		break;
+	}
+}
+
+static struct mcfqspi_cs_control m527x_cs_control = {
+	.setup                  = m527x_cs_setup,
+	.teardown               = m527x_cs_teardown,
+	.select                 = m527x_cs_select,
+	.deselect               = m527x_cs_deselect,
+};
+
+static struct mcfqspi_platform_data m527x_qspi_data = {
+	.bus_num		= 0,
+	.num_chipselect		= 4,
+	.cs_control		= &m527x_cs_control,
+};
+
+static struct platform_device m527x_qspi = {
+	.name			= "mcfqspi",
+	.id			= 0,
+	.num_resources		= ARRAY_SIZE(m527x_qspi_resources),
+	.resource		= m527x_qspi_resources,
+	.dev.platform_data	= &m527x_qspi_data,
+};
+
+static void __init m527x_qspi_init(void)
+{
+#if defined(CONFIG_M5271)
+	u16 par;
+
+	/* setup QSPS pins for QSPI with gpio CS control */
+	writeb(0x1f, MCFGPIO_PAR_QSPI);
+	/* and CS2 & CS3 as gpio */
+	par = readw(MCFGPIO_PAR_TIMER);
+	par &= 0x3f3f;
+	writew(par, MCFGPIO_PAR_TIMER);
+#elif defined(CONFIG_M5275)
+	/* setup QSPS pins for QSPI with gpio CS control */
+	writew(0x003e, MCFGPIO_PAR_QSPI);
+#endif
+}
+#endif /* defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) */
+
 static struct platform_device *m527x_devices[] __initdata = {
 	&m527x_uart,
 	&m527x_fec[0],
 #ifdef CONFIG_FEC2
 	&m527x_fec[1],
 #endif
+#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
+	&m527x_qspi,
+#endif
 };
 
 /***************************************************************************/
@@ -187,6 +366,9 @@ void __init config_BSP(char *commandp, int size)
 	mach_reset = m527x_cpu_reset;
 	m527x_uarts_init();
 	m527x_fec_init();
+#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
+	m527x_qspi_init();
+#endif
 }
 
 /***************************************************************************/