Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: (25 commits)
  m68knommu: fix broken setting of irq_chip and handler
  m68knommu: switch to using -mcpu= flags for ColdFire targets
  m68knommu: arch/m68knommu/Kconfig whitespace cleanup
  m68knommu: create optimal separate instruction and data cache for ColdFire
  m68knommu: support ColdFire caches that do copyback and write-through
  m68knommu: support version 2 ColdFire split cache
  m68knommu: make cache push code ColdFire generic
  m68knommu: clean up ColdFire cache control code
  m68knommu: move inclusion of ColdFire v4 cache registers
  m68knommu: merge bit definitions for version 3 ColdFire cache controller
  m68knommu: create bit definitions for the version 2 ColdFire cache controller
  m68knommu: remove empty __iounmap() it is no used
  m68knommu: remove kernel_map() code, it is not used
  m68knommu: remove do_page_fault(), it is not used
  m68knommu: use user stack pointer hardware on some ColdFire cores
  m68knommu: remove command line printing DEBUG
  m68knommu: remove fasthandler interrupt code
  m68knommu: move UART addressing to part specific includes
  m68knommu: fix clock rate value reported for ColdFire 54xx parts
  m68knommu: move ColdFire CPU names into their headers
  ...

4 files changed, 81 insertions, 53 deletions

diff --git a/arch/m68knommu/platform/coldfire/Makefile b/arch/m68knommu/platform/coldfire/Makefile
index 45f501fa452..a8967baabd7 100644
--- a/arch/m68knommu/platform/coldfire/Makefile
+++ b/arch/m68knommu/platform/coldfire/Makefile
@@ -14,7 +14,7 @@
 
 asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
 
-obj-$(CONFIG_COLDFIRE)	+= clk.o dma.o entry.o vectors.o
+obj-$(CONFIG_COLDFIRE)	+= cache.o clk.o dma.o entry.o vectors.o
 obj-$(CONFIG_M5206)	+= timers.o intc.o
 obj-$(CONFIG_M5206e)	+= timers.o intc.o
 obj-$(CONFIG_M520x)	+= pit.o intc-simr.o
@@ -26,7 +26,7 @@ obj-$(CONFIG_M528x)	+= pit.o intc-2.o
 obj-$(CONFIG_M5307)	+= timers.o intc.o
 obj-$(CONFIG_M532x)	+= timers.o intc-simr.o
 obj-$(CONFIG_M5407)	+= timers.o intc.o
-obj-$(CONFIG_M548x)	+= sltimers.o intc-2.o
+obj-$(CONFIG_M54xx)	+= sltimers.o intc-2.o
 
 obj-y			+= pinmux.o gpio.o
 extra-y := head.o
diff --git a/arch/m68knommu/platform/coldfire/cache.c b/arch/m68knommu/platform/coldfire/cache.c
new file mode 100644
index 00000000000..235d3c4f4f0
--- /dev/null
+++ b/arch/m68knommu/platform/coldfire/cache.c
@@ -0,0 +1,48 @@
+/***************************************************************************/
+
+/*
+ *	cache.c -- general ColdFire Cache maintainence code
+ *
+ *	Copyright (C) 2010, Greg Ungerer (gerg@snapgear.com)
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+
+/***************************************************************************/
+#ifdef CACHE_PUSH
+/***************************************************************************/
+
+/*
+ *	Use cpushl to push all dirty cache lines back to memory.
+ *	Older versions of GAS don't seem to know how to generate the
+ *	ColdFire cpushl instruction... Oh well, bit stuff it for now.
+ */
+
+void mcf_cache_push(void)
+{
+	__asm__ __volatile__ (
+		"clrl	%%d0\n\t"
+		"1:\n\t"
+		"movel	%%d0,%%a0\n\t"
+		"2:\n\t"
+		".word	0xf468\n\t"
+		"addl	%0,%%a0\n\t"
+		"cmpl	%1,%%a0\n\t"
+		"blt	2b\n\t"
+		"addql	#1,%%d0\n\t"
+		"cmpil	%2,%%d0\n\t"
+		"bne	1b\n\t"
+		: /* No output */
+		: "i" (CACHE_LINE_SIZE),
+		  "i" (DCACHE_SIZE / CACHE_WAYS),
+		  "i" (CACHE_WAYS)
+		: "d0", "a0" );
+}
+
+/***************************************************************************/
+#endif /* CACHE_PUSH */
+/***************************************************************************/
diff --git a/arch/m68knommu/platform/coldfire/entry.S b/arch/m68knommu/platform/coldfire/entry.S
index e1debc8285e..4ddfc3da70d 100644
--- a/arch/m68knommu/platform/coldfire/entry.S
+++ b/arch/m68knommu/platform/coldfire/entry.S
@@ -36,13 +36,16 @@
 #include <asm/asm-offsets.h>
 #include <asm/entry.h>
 
+#ifdef CONFIG_COLDFIRE_SW_A7
+/*
+ *	Define software copies of the supervisor and user stack pointers.
+ */
 .bss
-
 sw_ksp:
 .long	0
-
 sw_usp:
 .long	0
+#endif /* CONFIG_COLDFIRE_SW_A7 */
 
 .text
 
@@ -51,7 +54,6 @@ sw_usp:
 .globl ret_from_exception
 .globl ret_from_signal
 .globl sys_call_table
-.globl ret_from_interrupt
 .globl inthandler
 .globl fasthandler
 
@@ -140,20 +142,7 @@ Luser_return:
 	jne	Lwork_to_do		/* still work to do */
 
 Lreturn:
-	move	#0x2700,%sr		/* disable intrs */
-	movel	sw_usp,%a0		/* get usp */
-	movel	%sp@(PT_OFF_PC),%a0@-	/* copy exception program counter */
-	movel	%sp@(PT_OFF_FORMATVEC),%a0@- /* copy exception format/vector/sr */
-	moveml	%sp@,%d1-%d5/%a0-%a2
-	lea	%sp@(32),%sp		/* space for 8 regs */
-	movel	%sp@+,%d0
-	addql	#4,%sp			/* orig d0 */
-	addl	%sp@+,%sp		/* stk adj */
-	addql	#8,%sp			/* remove exception */
-	movel	%sp,sw_ksp		/* save ksp */
-	subql	#8,sw_usp		/* set exception */
-	movel	sw_usp,%sp		/* restore usp */
-	rte
+	RESTORE_USER
 
 Lwork_to_do:
 	movel	%a0@(TI_FLAGS),%d1	/* get thread_info->flags */
@@ -191,31 +180,7 @@ ENTRY(inthandler)
 	jbsr	do_IRQ			/* call high level irq handler */
 	lea	%sp@(8),%sp		/* pop args off stack */
 
-	bra	ret_from_interrupt	/* this was fallthrough */
-
-/*
- * This is the fast interrupt handler (for certain hardware interrupt
- * sources). Unlike the normal interrupt handler it just uses the
- * current stack (doesn't care if it is user or kernel). It also
- * doesn't bother doing the bottom half handlers.
- */
-ENTRY(fasthandler)
-	SAVE_LOCAL
-
-	movew	%sp@(PT_OFF_FORMATVEC),%d0
-	andl	#0x03fc,%d0		/* mask out vector only */
-
-	movel	%sp,%sp@-		/* push regs arg */
-	lsrl	#2,%d0			/* calculate real vector # */
-	movel	%d0,%sp@-		/* push vector number */
-	jbsr	do_IRQ			/* call high level irq handler */
-	lea	%sp@(8),%sp		/* pop args off stack */
-
-	RESTORE_LOCAL
-
-ENTRY(ret_from_interrupt)
-	/* the fasthandler is confusing me, haven't seen any user */
-	jmp	ret_from_exception
+	bra	ret_from_exception
 
 /*
  * Beware - when entering resume, prev (the current task) is
@@ -226,9 +191,8 @@ ENTRY(ret_from_interrupt)
  */
 ENTRY(resume)
 	movel	%a0, %d1			/* get prev thread in d1 */
-
-	movel	sw_usp,%d0			/* save usp */
-	movel	%d0,%a0@(TASK_THREAD+THREAD_USP)
+	RDUSP
+	movel	%a2,%a0@(TASK_THREAD+THREAD_USP)
 
 	SAVE_SWITCH_STACK
 	movel	%sp,%a0@(TASK_THREAD+THREAD_KSP) /* save kernel stack pointer */
@@ -236,5 +200,5 @@ ENTRY(resume)
 	RESTORE_SWITCH_STACK
 
 	movel	%a1@(TASK_THREAD+THREAD_USP),%a0 /* restore thread user stack */
-	movel	%a0, sw_usp
+	WRUSP
 	rts
diff --git a/arch/m68knommu/platform/coldfire/head.S b/arch/m68knommu/platform/coldfire/head.S
index 0b2d7c7adf7..d5977909ae5 100644
--- a/arch/m68knommu/platform/coldfire/head.S
+++ b/arch/m68knommu/platform/coldfire/head.S
@@ -3,7 +3,7 @@
 /*
  *	head.S -- common startup code for ColdFire CPUs.
  *
- *	(C) Copyright 1999-2006, Greg Ungerer <gerg@snapgear.com>.
+ *	(C) Copyright 1999-2010, Greg Ungerer <gerg@snapgear.com>.
  */
 
 /*****************************************************************************/
@@ -13,7 +13,6 @@
 #include <linux/init.h>
 #include <asm/asm-offsets.h>
 #include <asm/coldfire.h>
-#include <asm/mcfcache.h>
 #include <asm/mcfsim.h>
 #include <asm/thread_info.h>
 
@@ -173,10 +172,27 @@ _start:
 
 	/*
 	 *	Now that we know what the memory is, lets enable cache
-	 *	and get things moving. This is Coldfire CPU specific.
+	 *	and get things moving. This is Coldfire CPU specific. Not
+	 *	all version cores have identical cache register setup. But
+	 *	it is very similar. Define the exact settings in the headers
+	 *	then the code here is the same for all.
 	 */
-	CACHE_ENABLE				/* enable CPU cache */
-
+	movel	#CACHE_INIT,%d0			/* invalidate whole cache */
+	movec	%d0,%CACR
+	nop
+	movel	#ACR0_MODE,%d0			/* set RAM region for caching */
+	movec	%d0,%ACR0
+	movel	#ACR1_MODE,%d0			/* anything else to cache? */
+	movec	%d0,%ACR1
+#ifdef ACR2_MODE
+	movel	#ACR2_MODE,%d0
+	movec	%d0,%ACR2
+	movel	#ACR3_MODE,%d0
+	movec	%d0,%ACR3
+#endif
+	movel	#CACHE_MODE,%d0			/* enable cache */
+	movec	%d0,%CACR
+	nop
 
 #ifdef CONFIG_ROMFS_FS
 	/*