diff options
| author | Richard Retanubun <RichardRetanubun@RuggedCom.com> | 2009-04-08 11:51:27 +1000 |
|---|---|---|
| committer | Greg Ungerer <gerg@uclinux.org> | 2009-04-22 14:45:07 +1000 |
| commit | 592578a1dd1be0c940e36f769acdd3cc6651a7a1 (patch) | |
| tree | f91e06fd511870f19eb61f3cca3af3ef3f41d90b /arch/m68knommu | |
| parent | ccc5ff94c66e628d3c501b26ace5d4339667715d (diff) | |
m68knommu: Fixed GPIO pin initialization for CONFIG_M5271 FEC.
This processor only have one FEC and its MDIO pins are
located at a different offset than the code used for
the current CONFIG_M527x.
Tesed on M5271EVB eval platform.
Without this patch the FEC driver will report no PHY attached
if the bootloader does not pre-initialize the PAR_FECI2C GPIO register.
Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Diffstat (limited to 'arch/m68knommu')
| -rw-r--r-- | arch/m68knommu/platform/527x/config.c | 5 |
1 files changed, 5 insertions, 0 deletions
diff --git a/arch/m68knommu/platform/527x/config.c b/arch/m68knommu/platform/527x/config.c index 49343fb157b..428b15922ef 100644 --- a/arch/m68knommu/platform/527x/config.c +++ b/arch/m68knommu/platform/527x/config.c @@ -189,10 +189,15 @@ static void __init m527x_fec_init(void) m527x_fec_irq_init(0); /* Set multi-function pins to ethernet mode for fec0 */ +#if defined(CONFIG_M5271) + v = readb(MCF_IPSBAR + 0x100047); + writeb(v | 0xf0, MCF_IPSBAR + 0x100047); +#else par = readw(MCF_IPSBAR + 0x100082); writew(par | 0xf00, MCF_IPSBAR + 0x100082); v = readb(MCF_IPSBAR + 0x100078); writeb(v | 0xc0, MCF_IPSBAR + 0x100078); +#endif #ifdef CONFIG_FEC2 m527x_fec_irq_init(1); |