Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6

Conflicts:
	drivers/net/stmmac/stmmac_main.c
	drivers/net/wireless/wl12xx/wl1271_cmd.c
	drivers/net/wireless/wl12xx/wl1271_main.c
	drivers/net/wireless/wl12xx/wl1271_spi.c
	net/core/ethtool.c
	net/mac80211/scan.c

7 files changed, 256 insertions, 256 deletions

diff --git a/arch/microblaze/include/asm/futex.h b/arch/microblaze/include/asm/futex.h
index 8dbb6e7a03a..ad3fd61b2fe 100644
--- a/arch/microblaze/include/asm/futex.h
+++ b/arch/microblaze/include/asm/futex.h
@@ -55,7 +55,7 @@ futex_atomic_op_inuser(int encoded_op, int __user *uaddr)
 		__futex_atomic_op("or %1,%0,%4;", ret, oldval, uaddr, oparg);
 		break;
 	case FUTEX_OP_ANDN:
-		__futex_atomic_op("and %1,%0,%4;", ret, oldval, uaddr, oparg);
+		__futex_atomic_op("andn %1,%0,%4;", ret, oldval, uaddr, oparg);
 		break;
 	case FUTEX_OP_XOR:
 		__futex_atomic_op("xor %1,%0,%4;", ret, oldval, uaddr, oparg);
diff --git a/arch/microblaze/include/asm/io.h b/arch/microblaze/include/asm/io.h
index 32d621a56ae..e45a6eea92e 100644
--- a/arch/microblaze/include/asm/io.h
+++ b/arch/microblaze/include/asm/io.h
@@ -108,6 +108,11 @@ static inline void writel(unsigned int v, volatile void __iomem *addr)
 #define iowrite16(v, addr)	__raw_writew((u16)(v), (u16 *)(addr))
 #define iowrite32(v, addr)	__raw_writel((u32)(v), (u32 *)(addr))
 
+#define ioread16be(addr)	__raw_readw((u16 *)(addr))
+#define ioread32be(addr)	__raw_readl((u32 *)(addr))
+#define iowrite16be(v, addr)	__raw_writew((u16)(v), (u16 *)(addr))
+#define iowrite32be(v, addr)	__raw_writel((u32)(v), (u32 *)(addr))
+
 /* These are the definitions for the x86 IO instructions
  * inb/inw/inl/outb/outw/outl, the "string" versions
  * insb/insw/insl/outsb/outsw/outsl, and the "pausing" versions
diff --git a/arch/microblaze/include/asm/processor.h b/arch/microblaze/include/asm/processor.h
index 563c6b9453f..8eeb09211ec 100644
--- a/arch/microblaze/include/asm/processor.h
+++ b/arch/microblaze/include/asm/processor.h
@@ -14,7 +14,6 @@
 #include <asm/ptrace.h>
 #include <asm/setup.h>
 #include <asm/registers.h>
-#include <asm/segment.h>
 #include <asm/entry.h>
 #include <asm/current.h>
 
diff --git a/arch/microblaze/include/asm/segment.h b/arch/microblaze/include/asm/segment.h
deleted file mode 100644
index 0e7102c3fb1..00000000000
--- a/arch/microblaze/include/asm/segment.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
- * Copyright (C) 2008-2009 PetaLogix
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_SEGMENT_H
-#define _ASM_MICROBLAZE_SEGMENT_H
-
-# ifndef __ASSEMBLY__
-
-typedef struct {
-	unsigned long seg;
-} mm_segment_t;
-
-/*
- * On Microblaze the fs value is actually the top of the corresponding
- * address space.
- *
- * The fs value determines whether argument validity checking should be
- * performed or not. If get_fs() == USER_DS, checking is performed, with
- * get_fs() == KERNEL_DS, checking is bypassed.
- *
- * For historical reasons, these macros are grossly misnamed.
- *
- * For non-MMU arch like Microblaze, KERNEL_DS and USER_DS is equal.
- */
-# define MAKE_MM_SEG(s)       ((mm_segment_t) { (s) })
-
-#  ifndef CONFIG_MMU
-#  define KERNEL_DS	MAKE_MM_SEG(0)
-#  define USER_DS	KERNEL_DS
-#  else
-#  define KERNEL_DS	MAKE_MM_SEG(0xFFFFFFFF)
-#  define USER_DS	MAKE_MM_SEG(TASK_SIZE - 1)
-#  endif
-
-# define get_ds()	(KERNEL_DS)
-# define get_fs()	(current_thread_info()->addr_limit)
-# define set_fs(val)	(current_thread_info()->addr_limit = (val))
-
-# define segment_eq(a, b)	((a).seg == (b).seg)
-
-# endif /* __ASSEMBLY__ */
-#endif /* _ASM_MICROBLAZE_SEGMENT_H */
diff --git a/arch/microblaze/include/asm/thread_info.h b/arch/microblaze/include/asm/thread_info.h
index 6e92885d381..b2ca80f6464 100644
--- a/arch/microblaze/include/asm/thread_info.h
+++ b/arch/microblaze/include/asm/thread_info.h
@@ -19,7 +19,6 @@
 #ifndef __ASSEMBLY__
 # include <linux/types.h>
 # include <asm/processor.h>
-# include <asm/segment.h>
 
 /*
  * low level task data that entry.S needs immediate access to
@@ -60,6 +59,10 @@ struct cpu_context {
 	__u32	fsr;
 };
 
+typedef struct {
+	unsigned long seg;
+} mm_segment_t;
+
 struct thread_info {
 	struct task_struct	*task; /* main task structure */
 	struct exec_domain	*exec_domain; /* execution domain */
diff --git a/arch/microblaze/include/asm/tlbflush.h b/arch/microblaze/include/asm/tlbflush.h
index bcb8b41d55a..2e1353c2d18 100644
--- a/arch/microblaze/include/asm/tlbflush.h
+++ b/arch/microblaze/include/asm/tlbflush.h
@@ -24,6 +24,7 @@ extern void _tlbie(unsigned long address);
 extern void _tlbia(void);
 
 #define __tlbia()	{ preempt_disable(); _tlbia(); preempt_enable(); }
+#define __tlbie(x)	{ _tlbie(x); }
 
 static inline void local_flush_tlb_all(void)
 	{ __tlbia(); }
@@ -31,7 +32,7 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm)
 	{ __tlbia(); }
 static inline void local_flush_tlb_page(struct vm_area_struct *vma,
 				unsigned long vmaddr)
-	{ _tlbie(vmaddr); }
+	{ __tlbie(vmaddr); }
 static inline void local_flush_tlb_range(struct vm_area_struct *vma,
 		unsigned long start, unsigned long end)
 	{ __tlbia(); }
diff --git a/arch/microblaze/include/asm/uaccess.h b/arch/microblaze/include/asm/uaccess.h
index 371bd6e56d9..446bec29b14 100644
--- a/arch/microblaze/include/asm/uaccess.h
+++ b/arch/microblaze/include/asm/uaccess.h
@@ -22,101 +22,73 @@
 #include <asm/mmu.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
-#include <asm/segment.h>
 #include <linux/string.h>
 
 #define VERIFY_READ	0
 #define VERIFY_WRITE	1
 
-#define __clear_user(addr, n)	(memset((void *)(addr), 0, (n)), 0)
-
-#ifndef CONFIG_MMU
-
-extern int ___range_ok(unsigned long addr, unsigned long size);
-
-#define __range_ok(addr, size) \
-		___range_ok((unsigned long)(addr), (unsigned long)(size))
-
-#define access_ok(type, addr, size) (__range_ok((addr), (size)) == 0)
-#define __access_ok(add, size) (__range_ok((addr), (size)) == 0)
-
-/* Undefined function to trigger linker error */
-extern int bad_user_access_length(void);
-
-/* FIXME this is function for optimalization -> memcpy */
-#define __get_user(var, ptr)				\
-({							\
-	int __gu_err = 0;				\
-	switch (sizeof(*(ptr))) {			\
-	case 1:						\
-	case 2:						\
-	case 4:						\
-		(var) = *(ptr);				\
-		break;					\
-	case 8:						\
-		memcpy((void *) &(var), (ptr), 8);	\
-		break;					\
-	default:					\
-		(var) = 0;				\
-		__gu_err = __get_user_bad();		\
-		break;					\
-	}						\
-	__gu_err;					\
-})
+/*
+ * On Microblaze the fs value is actually the top of the corresponding
+ * address space.
+ *
+ * The fs value determines whether argument validity checking should be
+ * performed or not. If get_fs() == USER_DS, checking is performed, with
+ * get_fs() == KERNEL_DS, checking is bypassed.
+ *
+ * For historical reasons, these macros are grossly misnamed.
+ *
+ * For non-MMU arch like Microblaze, KERNEL_DS and USER_DS is equal.
+ */
+# define MAKE_MM_SEG(s)       ((mm_segment_t) { (s) })
 
-#define __get_user_bad()	(bad_user_access_length(), (-EFAULT))
+#  ifndef CONFIG_MMU
+#  define KERNEL_DS	MAKE_MM_SEG(0)
+#  define USER_DS	KERNEL_DS
+#  else
+#  define KERNEL_DS	MAKE_MM_SEG(0xFFFFFFFF)
+#  define USER_DS	MAKE_MM_SEG(TASK_SIZE - 1)
+#  endif
 
-/* FIXME is not there defined __pu_val */
-#define __put_user(var, ptr)					\
-({								\
-	int __pu_err = 0;					\
-	switch (sizeof(*(ptr))) {				\
-	case 1:							\
-	case 2:							\
-	case 4:							\
-		*(ptr) = (var);					\
-		break;						\
-	case 8: {						\
-		typeof(*(ptr)) __pu_val = (var);		\
-		memcpy(ptr, &__pu_val, sizeof(__pu_val));	\
-		}						\
-		break;						\
-	default:						\
-		__pu_err = __put_user_bad();			\
-		break;						\
-	}							\
-	__pu_err;						\
-})
+# define get_ds()	(KERNEL_DS)
+# define get_fs()	(current_thread_info()->addr_limit)
+# define set_fs(val)	(current_thread_info()->addr_limit = (val))
 
-#define __put_user_bad()	(bad_user_access_length(), (-EFAULT))
+# define segment_eq(a, b)	((a).seg == (b).seg)
 
-#define put_user(x, ptr)	__put_user((x), (ptr))
-#define get_user(x, ptr)	__get_user((x), (ptr))
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue. No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path. This means when everything is well,
+ * we don't even have to jump over them. Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+struct exception_table_entry {
+	unsigned long insn, fixup;
+};
 
-#define copy_to_user(to, from, n)	(memcpy((to), (from), (n)), 0)
-#define copy_from_user(to, from, n)	(memcpy((to), (from), (n)), 0)
+/* Returns 0 if exception not found and fixup otherwise.  */
+extern unsigned long search_exception_table(unsigned long);
 
-#define __copy_to_user(to, from, n)	(copy_to_user((to), (from), (n)))
-#define __copy_from_user(to, from, n)	(copy_from_user((to), (from), (n)))
-#define __copy_to_user_inatomic(to, from, n) \
-			(__copy_to_user((to), (from), (n)))
-#define __copy_from_user_inatomic(to, from, n) \
-			(__copy_from_user((to), (from), (n)))
+#ifndef CONFIG_MMU
 
-static inline unsigned long clear_user(void *addr, unsigned long size)
+/* Check against bounds of physical memory */
+static inline int ___range_ok(unsigned long addr, unsigned long size)
 {
-	if (access_ok(VERIFY_WRITE, addr, size))
-		size = __clear_user(addr, size);
-	return size;
+	return ((addr < memory_start) ||
+		((addr + size) > memory_end));
 }
 
-/* Returns 0 if exception not found and fixup otherwise.  */
-extern unsigned long search_exception_table(unsigned long);
+#define __range_ok(addr, size) \
+		___range_ok((unsigned long)(addr), (unsigned long)(size))
 
-extern long strncpy_from_user(char *dst, const char *src, long count);
-extern long strnlen_user(const char *src, long count);
+#define access_ok(type, addr, size) (__range_ok((addr), (size)) == 0)
 
-#else /* CONFIG_MMU */
+#else
 
 /*
  * Address is valid if:
@@ -129,24 +101,88 @@ extern long strnlen_user(const char *src, long count);
 /* || printk("access_ok failed for %s at 0x%08lx (size %d), seg 0x%08x\n",
  type?"WRITE":"READ",addr,size,get_fs().seg)) */
 
-/*
- * All the __XXX versions macros/functions below do not perform
- * access checking. It is assumed that the necessary checks have been
- * already performed before the finction (macro) is called.
- */
+#endif
 
-#define get_user(x, ptr)						\
-({									\
-	access_ok(VERIFY_READ, (ptr), sizeof(*(ptr)))			\
-		? __get_user((x), (ptr)) : -EFAULT;			\
-})
+#ifdef CONFIG_MMU
+# define __FIXUP_SECTION	".section .fixup,\"ax\"\n"
+# define __EX_TABLE_SECTION	".section __ex_table,\"a\"\n"
+#else
+# define __FIXUP_SECTION	".section .discard,\"ax\"\n"
+# define __EX_TABLE_SECTION	".section .discard,\"a\"\n"
+#endif
 
-#define put_user(x, ptr)						\
-({									\
-	access_ok(VERIFY_WRITE, (ptr), sizeof(*(ptr)))			\
-		? __put_user((x), (ptr)) : -EFAULT;			\
+extern unsigned long __copy_tofrom_user(void __user *to,
+		const void __user *from, unsigned long size);
+
+/* Return: number of not copied bytes, i.e. 0 if OK or non-zero if fail. */
+static inline unsigned long __must_check __clear_user(void __user *to,
+							unsigned long n)
+{
+	/* normal memset with two words to __ex_table */
+	__asm__ __volatile__ (				\
+			"1:	sb	r0, %2, r0;"	\
+			"	addik	%0, %0, -1;"	\
+			"	bneid	%0, 1b;"	\
+			"	addik	%2, %2, 1;"	\
+			"2:			"	\
+			__EX_TABLE_SECTION		\
+			".word	1b,2b;"			\
+			".previous;"			\
+		: "=r"(n)				\
+		: "0"(n), "r"(to)
+	);
+	return n;
+}
+
+static inline unsigned long __must_check clear_user(void __user *to,
+							unsigned long n)
+{
+	might_sleep();
+	if (unlikely(!access_ok(VERIFY_WRITE, to, n)))
+		return n;
+
+	return __clear_user(to, n);
+}
+
+/* put_user and get_user macros */
+extern long __user_bad(void);
+
+#define __get_user_asm(insn, __gu_ptr, __gu_val, __gu_err)	\
+({								\
+	__asm__ __volatile__ (					\
+			"1:"	insn	" %1, %2, r0;"		\
+			"	addk	%0, r0, r0;"		\
+			"2:			"		\
+			__FIXUP_SECTION				\
+			"3:	brid	2b;"			\
+			"	addik	%0, r0, %3;"		\
+			".previous;"				\
+			__EX_TABLE_SECTION			\
+			".word	1b,3b;"				\
+			".previous;"				\
+		: "=&r"(__gu_err), "=r"(__gu_val)		\
+		: "r"(__gu_ptr), "i"(-EFAULT)			\
+	);							\
 })
 
+/**
+ * get_user: - Get a simple variable from user space.
+ * @x:   Variable to store result.
+ * @ptr: Source address, in user space.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * This macro copies a single simple variable from user space to kernel
+ * space.  It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and the result of
+ * dereferencing @ptr must be assignable to @x without a cast.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ * On error, the variable @x is set to zero.
+ */
+
 #define __get_user(x, ptr)						\
 ({									\
 	unsigned long __gu_val;						\
@@ -163,30 +199,74 @@ extern long strnlen_user(const char *src, long count);
 		__get_user_asm("lw", (ptr), __gu_val, __gu_err);	\
 		break;							\
 	default:							\
-		__gu_val = 0; __gu_err = -EINVAL;			\
+		/* __gu_val = 0; __gu_err = -EINVAL;*/ __gu_err = __user_bad();\
 	}								\
 	x = (__typeof__(*(ptr))) __gu_val;				\
 	__gu_err;							\
 })
 
-#define __get_user_asm(insn, __gu_ptr, __gu_val, __gu_err)		\
+
+#define get_user(x, ptr)						\
 ({									\
-	__asm__ __volatile__ (						\
-			"1:"	insn	" %1, %2, r0;			\
-				addk	%0, r0, r0;			\
-			2:						\
-			.section .fixup,\"ax\";				\
-			3:	brid	2b;				\
-				addik	%0, r0, %3;			\
-			.previous;					\
-			.section __ex_table,\"a\";			\
-			.word	1b,3b;					\
-			.previous;"					\
-		: "=r"(__gu_err), "=r"(__gu_val)			\
-		: "r"(__gu_ptr), "i"(-EFAULT)				\
-	);								\
+	access_ok(VERIFY_READ, (ptr), sizeof(*(ptr)))			\
+		? __get_user((x), (ptr)) : -EFAULT;			\
+})
+
+#define __put_user_asm(insn, __gu_ptr, __gu_val, __gu_err)	\
+({								\
+	__asm__ __volatile__ (					\
+			"1:"	insn	" %1, %2, r0;"		\
+			"	addk	%0, r0, r0;"		\
+			"2:			"		\
+			__FIXUP_SECTION				\
+			"3:	brid	2b;"			\
+			"	addik	%0, r0, %3;"		\
+			".previous;"				\
+			__EX_TABLE_SECTION			\
+			".word	1b,3b;"				\
+			".previous;"				\
+		: "=&r"(__gu_err)				\
+		: "r"(__gu_val), "r"(__gu_ptr), "i"(-EFAULT)	\
+	);							\
 })
 
+#define __put_user_asm_8(__gu_ptr, __gu_val, __gu_err)		\
+({								\
+	__asm__ __volatile__ ("	lwi	%0, %1, 0;"		\
+			"1:	swi	%0, %2, 0;"		\
+			"	lwi	%0, %1, 4;"		\
+			"2:	swi	%0, %2, 4;"		\
+			"	addk	%0, r0, r0;"		\
+			"3:			"		\
+			__FIXUP_SECTION				\
+			"4:	brid	3b;"			\
+			"	addik	%0, r0, %3;"		\
+			".previous;"				\
+			__EX_TABLE_SECTION			\
+			".word	1b,4b,2b,4b;"			\
+			".previous;"				\
+		: "=&r"(__gu_err)				\
+		: "r"(&__gu_val), "r"(__gu_ptr), "i"(-EFAULT)	\
+		);						\
+})
+
+/**
+ * put_user: - Write a simple value into user space.
+ * @x:   Value to copy to user space.
+ * @ptr: Destination address, in user space.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * This macro copies a single simple value from kernel space to user
+ * space.  It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and @x must be assignable
+ * to the result of dereferencing @ptr.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ */
+
 #define __put_user(x, ptr)						\
 ({									\
 	__typeof__(*(ptr)) volatile __gu_val = (x);			\
@@ -195,7 +275,7 @@ extern long strnlen_user(const char *src, long count);
 	case 1:								\
 		__put_user_asm("sb", (ptr), __gu_val, __gu_err);	\
 		break;							\
-	case 2: 							\
+	case 2:								\
 		__put_user_asm("sh", (ptr), __gu_val, __gu_err);	\
 		break;							\
 	case 4:								\
@@ -205,121 +285,82 @@ extern long strnlen_user(const char *src, long count);
 		__put_user_asm_8((ptr), __gu_val, __gu_err);		\
 		break;							\
 	default:							\
-		__gu_err = -EINVAL;					\
+		/*__gu_err = -EINVAL;*/	__gu_err = __user_bad();	\
 	}								\
 	__gu_err;							\
 })
 
-#define __put_user_asm_8(__gu_ptr, __gu_val, __gu_err)	\
-({							\
-__asm__ __volatile__ ("	lwi	%0, %1, 0;		\
-		1:	swi	%0, %2, 0;		\
-			lwi	%0, %1, 4;		\
-		2:	swi	%0, %2, 4;		\
-			addk	%0,r0,r0;		\
-		3:					\
-		.section .fixup,\"ax\";			\
-		4:	brid	3b;			\
-			addik	%0, r0, %3;		\
-		.previous;				\
-		.section __ex_table,\"a\";		\
-		.word	1b,4b,2b,4b;			\
-		.previous;"				\
-	: "=&r"(__gu_err)				\
-	: "r"(&__gu_val),				\
-	"r"(__gu_ptr), "i"(-EFAULT)			\
-	);						\
-})
+#ifndef CONFIG_MMU
 
-#define __put_user_asm(insn, __gu_ptr, __gu_val, __gu_err)	\
-({								\
-	__asm__ __volatile__ (					\
-			"1:"	insn	" %1, %2, r0;		\
-				addk	%0, r0, r0;		\
-			2:					\
-			.section .fixup,\"ax\";			\
-			3:	brid	2b;			\
-				addik	%0, r0, %3;		\
-			.previous;				\
-			.section __ex_table,\"a\";		\
-			.word	1b,3b;				\
-			.previous;"				\
-		: "=r"(__gu_err)				\
-		: "r"(__gu_val), "r"(__gu_ptr), "i"(-EFAULT)	\
-	);							\
-})
+#define put_user(x, ptr)	__put_user((x), (ptr))
 
-/*
- * Return: number of not copied bytes, i.e. 0 if OK or non-zero if fail.
- */
-static inline int clear_user(char *to, int size)
-{
-	if (size && access_ok(VERIFY_WRITE, to, size)) {
-		__asm__ __volatile__ ("				\
-				1:				\
-					sb	r0, %2, r0;	\
-					addik	%0, %0, -1;	\
-					bneid	%0, 1b;		\
-					addik	%2, %2, 1;	\
-				2:				\
-				.section __ex_table,\"a\";	\
-				.word	1b,2b;			\
-				.section .text;"		\
-			: "=r"(size)				\
-			: "0"(size), "r"(to)
-		);
-	}
-	return size;
-}
+#else /* CONFIG_MMU */
 
-#define __copy_from_user(to, from, n)	copy_from_user((to), (from), (n))
+#define put_user(x, ptr)						\
+({									\
+	access_ok(VERIFY_WRITE, (ptr), sizeof(*(ptr)))			\
+		? __put_user((x), (ptr)) : -EFAULT;			\
+})
+#endif /* CONFIG_MMU */
+
+/* copy_to_from_user */
+#define __copy_from_user(to, from, n)	\
+	__copy_tofrom_user((__force void __user *)(to), \
+				(void __user *)(from), (n))
 #define __copy_from_user_inatomic(to, from, n) \
 		copy_from_user((to), (from), (n))
 
-#define copy_to_user(to, from, n)					\
-	(access_ok(VERIFY_WRITE, (to), (n)) ?				\
-		__copy_tofrom_user((void __user *)(to),			\
-			(__force const void __user *)(from), (n))	\
-		: -EFAULT)
+static inline long copy_from_user(void *to,
+		const void __user *from, unsigned long n)
+{
+	might_sleep();
+	if (access_ok(VERIFY_READ, from, n))
+		return __copy_from_user(to, from, n);
+	return n;
+}
 
-#define __copy_to_user(to, from, n)	copy_to_user((to), (from), (n))
+#define __copy_to_user(to, from, n)	\
+		__copy_tofrom_user((void __user *)(to), \
+			(__force const void __user *)(from), (n))
 #define __copy_to_user_inatomic(to, from, n)	copy_to_user((to), (from), (n))
 
-#define copy_from_user(to, from, n)					\
-	(access_ok(VERIFY_READ, (from), (n)) ?				\
-		__copy_tofrom_user((__force void __user *)(to),		\
-			(void __user *)(from), (n))			\
-		: -EFAULT)
+static inline long copy_to_user(void __user *to,
+		const void *from, unsigned long n)
+{
+	might_sleep();
+	if (access_ok(VERIFY_WRITE, to, n))
+		return __copy_to_user(to, from, n);
+	return n;
+}
 
+/*
+ * Copy a null terminated string from userspace.
+ */
 extern int __strncpy_user(char *to, const char __user *from, int len);
-extern int __strnlen_user(const char __user *sstr, int len);
 
-#define strncpy_from_user(to, from, len)	\
-		(access_ok(VERIFY_READ, from, 1) ?	\
-			__strncpy_user(to, from, len) : -EFAULT)
-#define strnlen_user(str, len)	\
-		(access_ok(VERIFY_READ, str, 1) ? __strnlen_user(str, len) : 0)
+#define __strncpy_from_user	__strncpy_user
 
-#endif /* CONFIG_MMU */
-
-extern unsigned long __copy_tofrom_user(void __user *to,
-		const void __user *from, unsigned long size);
+static inline long
+strncpy_from_user(char *dst, const char __user *src, long count)
+{
+	if (!access_ok(VERIFY_READ, src, 1))
+		return -EFAULT;
+	return __strncpy_from_user(dst, src, count);
+}
 
 /*
- * The exception table consists of pairs of addresses: the first is the
- * address of an instruction that is allowed to fault, and the second is
- * the address at which the program should continue. No registers are
- * modified, so it is entirely up to the continuation code to figure out
- * what to do.
+ * Return the size of a string (including the ending 0)
  *
- * All the routines below use bits of fixup code that are out of line
- * with the main instruction path. This means when everything is well,
- * we don't even have to jump over them. Further, they do not intrude
- * on our cache or tlb entries.
+ * Return 0 on exception, a value greater than N if too long
  */
-struct exception_table_entry {
-	unsigned long insn, fixup;
-};
+extern int __strnlen_user(const char __user *sstr, int len);
+
+static inline long strnlen_user(const char __user *src, long n)
+{
+	if (!access_ok(VERIFY_READ, src, 1))
+		return 0;
+	return __strnlen_user(src, n);
+}
 
 #endif  /* __ASSEMBLY__ */
 #endif /* __KERNEL__ */