Merge branch 'linus' into x86/platform

Reason: Import mainline device tree changes on which further patches
        depend on or conflict.

Trivial conflict in: drivers/spi/pxa2xx_spi_pci.c

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

7 files changed, 41 insertions, 33 deletions

diff --git a/arch/microblaze/include/asm/irqflags.h b/arch/microblaze/include/asm/irqflags.h
index 5fd31905775..c4532f032b3 100644
--- a/arch/microblaze/include/asm/irqflags.h
+++ b/arch/microblaze/include/asm/irqflags.h
@@ -12,7 +12,7 @@
 #include <linux/types.h>
 #include <asm/registers.h>
 
-#ifdef CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR
+#if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR
 
 static inline unsigned long arch_local_irq_save(void)
 {
diff --git a/arch/microblaze/include/asm/pgtable.h b/arch/microblaze/include/asm/pgtable.h
index b23f6807587..885574a73f0 100644
--- a/arch/microblaze/include/asm/pgtable.h
+++ b/arch/microblaze/include/asm/pgtable.h
@@ -411,20 +411,19 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 static inline unsigned long pte_update(pte_t *p, unsigned long clr,
 				unsigned long set)
 {
-	unsigned long old, tmp, msr;
-
-	__asm__ __volatile__("\
-	msrclr	%2, 0x2\n\
-	nop\n\
-	lw	%0, %4, r0\n\
-	andn	%1, %0, %5\n\
-	or	%1, %1, %6\n\
-	sw	%1, %4, r0\n\
-	mts     rmsr, %2\n\
-	nop"
-	: "=&r" (old), "=&r" (tmp), "=&r" (msr), "=m" (*p)
-	: "r" ((unsigned long)(p + 1) - 4), "r" (clr), "r" (set), "m" (*p)
-	: "cc");
+	unsigned long flags, old, tmp;
+
+	raw_local_irq_save(flags);
+
+	__asm__ __volatile__(	"lw	%0, %2, r0	\n"
+				"andn	%1, %0, %3	\n"
+				"or	%1, %1, %4	\n"
+				"sw	%1, %2, r0	\n"
+			: "=&r" (old), "=&r" (tmp)
+			: "r" ((unsigned long)(p + 1) - 4), "r" (clr), "r" (set)
+			: "cc");
+
+	raw_local_irq_restore(flags);
 
 	return old;
 }
diff --git a/arch/microblaze/kernel/cpu/pvr.c b/arch/microblaze/kernel/cpu/pvr.c
index e01afa68273..488c1ed24e3 100644
--- a/arch/microblaze/kernel/cpu/pvr.c
+++ b/arch/microblaze/kernel/cpu/pvr.c
@@ -27,7 +27,7 @@
 	register unsigned tmp __asm__("r3");			\
 	tmp = 0x0;	/* Prevent warning about unused */	\
 	__asm__ __volatile__ (					\
-			"mfs	%0, rpvr" #pvrid ";"	\
+			"mfs	%0, rpvr" #pvrid ";"		\
 			: "=r" (tmp) : : "memory"); 		\
 	val = tmp;						\
 }
@@ -54,7 +54,7 @@ int cpu_has_pvr(void)
 	if (!(flags & PVR_MSR_BIT))
 		return 0;
 
-	get_single_pvr(0x00, pvr0);
+	get_single_pvr(0, pvr0);
 	pr_debug("%s: pvr0 is 0x%08x\n", __func__, pvr0);
 
 	if (pvr0 & PVR0_PVR_FULL_MASK)
diff --git a/arch/microblaze/kernel/head.S b/arch/microblaze/kernel/head.S
index 42434008209..778a5ce2e4f 100644
--- a/arch/microblaze/kernel/head.S
+++ b/arch/microblaze/kernel/head.S
@@ -62,23 +62,32 @@ real_start:
 	andi	r1, r1, ~2
 	mts	rmsr, r1
 /*
- * Here is checking mechanism which check if Microblaze has msr instructions
- * We load msr and compare it with previous r1 value - if is the same,
- * msr instructions works if not - cpu don't have them.
+ * According to Xilinx, msrclr instruction behaves like 'mfs rX,rpc'
+ * if the msrclr instruction is not enabled. We use this to detect
+ * if the opcode is available, by issuing msrclr and then testing the result.
+ * r8 == 0 - msr instructions are implemented
+ * r8 != 0 - msr instructions are not implemented
  */
-	/* r8=0 - I have msr instr, 1 - I don't have them */
-	rsubi	r0, r0, 1	/* set the carry bit */
-	msrclr	r0, 0x4		/* try to clear it */
-	/* read the carry bit, r8 will be '0' if msrclr exists */
-	addik	r8, r0, 0
+	msrclr	r8, 0 /* clear nothing - just read msr for test */
+	cmpu	r8, r8, r1 /* r1 must contain msr reg content */
 
 /* r7 may point to an FDT, or there may be one linked in.
    if it's in r7, we've got to save it away ASAP.
    We ensure r7 points to a valid FDT, just in case the bootloader
    is broken or non-existent */
 	beqi	r7, no_fdt_arg			/* NULL pointer?  don't copy */
-	lw	r11, r0, r7			/* Does r7 point to a */
-	rsubi	r11, r11, OF_DT_HEADER		/* valid FDT? */
+/* Does r7 point to a valid FDT? Load HEADER magic number */
+	/* Run time Big/Little endian platform */
+	/* Save 1 as word and load byte - 0 - BIG, 1 - LITTLE */
+	addik	r11, r0, 0x1 /* BIG/LITTLE checking value */
+	/* __bss_start will be zeroed later - it is just temp location */
+	swi	r11, r0, TOPHYS(__bss_start)
+	lbui	r11, r0, TOPHYS(__bss_start)
+	beqid	r11, big_endian /* DO NOT break delay stop dependency */
+	lw	r11, r0, r7 /* Big endian load in delay slot */
+	lwr	r11, r0, r7 /* Little endian load */
+big_endian:
+	rsubi	r11, r11, OF_DT_HEADER	/* Check FDT header */
 	beqi	r11, _prepare_copy_fdt
 	or	r7, r0, r0		/* clear R7 when not valid DTB */
 	bnei	r11, no_fdt_arg			/* No - get out of here */
diff --git a/arch/microblaze/kernel/hw_exception_handler.S b/arch/microblaze/kernel/hw_exception_handler.S
index 25f6e07d8de..782680de312 100644
--- a/arch/microblaze/kernel/hw_exception_handler.S
+++ b/arch/microblaze/kernel/hw_exception_handler.S
@@ -147,10 +147,6 @@
 	#if CONFIG_XILINX_MICROBLAZE0_USE_BARREL > 0
 	#define BSRLI(rD, rA, imm)	\
 		bsrli rD, rA, imm
-	#elif CONFIG_XILINX_MICROBLAZE0_USE_DIV > 0
-	#define BSRLI(rD, rA, imm)	\
-		ori rD, r0, (1 << imm);	\
-		idivu rD, rD, rA
 	#else
 	#define BSRLI(rD, rA, imm) BSRLI ## imm (rD, rA)
 	/* Only the used shift constants defined here - add more if needed */
diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c
index bb1558e4b28..9312fbb37ef 100644
--- a/arch/microblaze/kernel/setup.c
+++ b/arch/microblaze/kernel/setup.c
@@ -161,11 +161,11 @@ void __init machine_early_init(const char *cmdline, unsigned int ram,
 #if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR
 	if (msr)
 		eprintk("!!!Your kernel has setup MSR instruction but "
-				"CPU don't have it %d\n", msr);
+				"CPU don't have it %x\n", msr);
 #else
 	if (!msr)
 		eprintk("!!!Your kernel not setup MSR instruction but "
-				"CPU have it %d\n", msr);
+				"CPU have it %x\n", msr);
 #endif
 
 	for (src = __ivt_start; src < __ivt_end; src++, dst++)
diff --git a/arch/microblaze/lib/fastcopy.S b/arch/microblaze/lib/fastcopy.S
index fdc48bb065d..62021d7e249 100644
--- a/arch/microblaze/lib/fastcopy.S
+++ b/arch/microblaze/lib/fastcopy.S
@@ -29,6 +29,10 @@
  *	between mem locations with size of xfer spec'd in bytes
  */
 
+#ifdef __MICROBLAZEEL__
+#error Microblaze LE not support ASM optimized lib func. Disable OPT_LIB_ASM.
+#endif
+
 #include <linux/linkage.h>
 	.text
 	.globl	memcpy