summaryrefslogtreecommitdiffstats
path: root/arch/microblaze
diff options
context:
space:
mode:
authorLucas De Marchi <lucas.demarchi@profusion.mobi>2011-03-30 22:57:33 -0300
committerLucas De Marchi <lucas.demarchi@profusion.mobi>2011-03-31 11:26:23 -0300
commit25985edcedea6396277003854657b5f3cb31a628 (patch)
treef026e810210a2ee7290caeb737c23cb6472b7c38 /arch/microblaze
parent6aba74f2791287ec407e0f92487a725a25908067 (diff)
Fix common misspellings
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Diffstat (limited to 'arch/microblaze')
-rw-r--r--arch/microblaze/Makefile2
-rw-r--r--arch/microblaze/include/asm/io.h2
-rw-r--r--arch/microblaze/include/asm/pci-bridge.h2
-rw-r--r--arch/microblaze/include/asm/pci.h2
-rw-r--r--arch/microblaze/kernel/cpu/cache.c2
-rw-r--r--arch/microblaze/lib/memcpy.c8
-rw-r--r--arch/microblaze/lib/memmove.c6
-rw-r--r--arch/microblaze/lib/memset.c2
-rw-r--r--arch/microblaze/pci/indirect_pci.c2
-rw-r--r--arch/microblaze/platform/generic/Kconfig.auto2
10 files changed, 15 insertions, 15 deletions
diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile
index 6f432e6df9a..b23c40eb7a5 100644
--- a/arch/microblaze/Makefile
+++ b/arch/microblaze/Makefile
@@ -18,7 +18,7 @@ export CPU_VER CPU_MAJOR CPU_MINOR CPU_REV
# rather than bools y/n
# Work out HW multipler support. This is tricky.
-# 1. Spartan2 has no HW multiplers.
+# 1. Spartan2 has no HW multipliers.
# 2. MicroBlaze v3.x always uses them, except in Spartan 2
# 3. All other FPGa/CPU ver combos, we can trust the CONFIG_ settings
ifeq (,$(findstring spartan2,$(CONFIG_XILINX_MICROBLAZE0_FAMILY)))
diff --git a/arch/microblaze/include/asm/io.h b/arch/microblaze/include/asm/io.h
index eae32220f44..8cdac14b55b 100644
--- a/arch/microblaze/include/asm/io.h
+++ b/arch/microblaze/include/asm/io.h
@@ -70,7 +70,7 @@ static inline void __raw_writeq(unsigned long v, volatile void __iomem *addr)
/*
* read (readb, readw, readl, readq) and write (writeb, writew,
- * writel, writeq) accessors are for PCI and thus littel endian.
+ * writel, writeq) accessors are for PCI and thus little endian.
* Linux 2.4 for Microblaze had this wrong.
*/
static inline unsigned char readb(const volatile void __iomem *addr)
diff --git a/arch/microblaze/include/asm/pci-bridge.h b/arch/microblaze/include/asm/pci-bridge.h
index 10717669e0c..746df91e579 100644
--- a/arch/microblaze/include/asm/pci-bridge.h
+++ b/arch/microblaze/include/asm/pci-bridge.h
@@ -76,7 +76,7 @@ struct pci_controller {
* Used for variants of PCI indirect handling and possible quirks:
* SET_CFG_TYPE - used on 4xx or any PHB that does explicit type0/1
* EXT_REG - provides access to PCI-e extended registers
- * SURPRESS_PRIMARY_BUS - we surpress the setting of PCI_PRIMARY_BUS
+ * SURPRESS_PRIMARY_BUS - we suppress the setting of PCI_PRIMARY_BUS
* on Freescale PCI-e controllers since they used the PCI_PRIMARY_BUS
* to determine which bus number to match on when generating type0
* config cycles
diff --git a/arch/microblaze/include/asm/pci.h b/arch/microblaze/include/asm/pci.h
index 2232ff942ba..ba65cf47254 100644
--- a/arch/microblaze/include/asm/pci.h
+++ b/arch/microblaze/include/asm/pci.h
@@ -158,7 +158,7 @@ extern void pci_resource_to_user(const struct pci_dev *dev, int bar,
extern void pcibios_setup_bus_devices(struct pci_bus *bus);
extern void pcibios_setup_bus_self(struct pci_bus *bus);
-/* This part of code was originaly in xilinx-pci.h */
+/* This part of code was originally in xilinx-pci.h */
#ifdef CONFIG_PCI_XILINX
extern void __init xilinx_pci_init(void);
#else
diff --git a/arch/microblaze/kernel/cpu/cache.c b/arch/microblaze/kernel/cpu/cache.c
index cf0afd90a2c..4b7d8a3f4ae 100644
--- a/arch/microblaze/kernel/cpu/cache.c
+++ b/arch/microblaze/kernel/cpu/cache.c
@@ -129,7 +129,7 @@ do { \
* to use for simple wdc or wic.
*
* start address is cache aligned
- * end address is not aligned, if end is aligned then I have to substract
+ * end address is not aligned, if end is aligned then I have to subtract
* cacheline length because I can't flush/invalidate the next cacheline.
* If is not, I align it because I will flush/invalidate whole line.
*/
diff --git a/arch/microblaze/lib/memcpy.c b/arch/microblaze/lib/memcpy.c
index cc495d7d99c..52746e718df 100644
--- a/arch/microblaze/lib/memcpy.c
+++ b/arch/microblaze/lib/memcpy.c
@@ -63,8 +63,8 @@ void *memcpy(void *v_dst, const void *v_src, __kernel_size_t c)
if (likely(c >= 4)) {
unsigned value, buf_hold;
- /* Align the dstination to a word boundry. */
- /* This is done in an endian independant manner. */
+ /* Align the destination to a word boundary. */
+ /* This is done in an endian independent manner. */
switch ((unsigned long)dst & 3) {
case 1:
*dst++ = *src++;
@@ -80,7 +80,7 @@ void *memcpy(void *v_dst, const void *v_src, __kernel_size_t c)
i_dst = (void *)dst;
/* Choose a copy scheme based on the source */
- /* alignment relative to dstination. */
+ /* alignment relative to destination. */
switch ((unsigned long)src & 3) {
case 0x0: /* Both byte offsets are aligned */
i_src = (const void *)src;
@@ -173,7 +173,7 @@ void *memcpy(void *v_dst, const void *v_src, __kernel_size_t c)
}
/* Finish off any remaining bytes */
- /* simple fast copy, ... unless a cache boundry is crossed */
+ /* simple fast copy, ... unless a cache boundary is crossed */
switch (c) {
case 3:
*dst++ = *src++;
diff --git a/arch/microblaze/lib/memmove.c b/arch/microblaze/lib/memmove.c
index 810fd68775e..2146c3752a8 100644
--- a/arch/microblaze/lib/memmove.c
+++ b/arch/microblaze/lib/memmove.c
@@ -83,8 +83,8 @@ void *memmove(void *v_dst, const void *v_src, __kernel_size_t c)
if (c >= 4) {
unsigned value, buf_hold;
- /* Align the destination to a word boundry. */
- /* This is done in an endian independant manner. */
+ /* Align the destination to a word boundary. */
+ /* This is done in an endian independent manner. */
switch ((unsigned long)dst & 3) {
case 3:
@@ -193,7 +193,7 @@ void *memmove(void *v_dst, const void *v_src, __kernel_size_t c)
dst = (void *)i_dst;
}
- /* simple fast copy, ... unless a cache boundry is crossed */
+ /* simple fast copy, ... unless a cache boundary is crossed */
/* Finish off any remaining bytes */
switch (c) {
case 4:
diff --git a/arch/microblaze/lib/memset.c b/arch/microblaze/lib/memset.c
index 834565d1607..ddf67939576 100644
--- a/arch/microblaze/lib/memset.c
+++ b/arch/microblaze/lib/memset.c
@@ -64,7 +64,7 @@ void *memset(void *v_src, int c, __kernel_size_t n)
if (likely(n >= 4)) {
/* Align the destination to a word boundary */
- /* This is done in an endian independant manner */
+ /* This is done in an endian independent manner */
switch ((unsigned) src & 3) {
case 1:
*src++ = c;
diff --git a/arch/microblaze/pci/indirect_pci.c b/arch/microblaze/pci/indirect_pci.c
index 25f18f017f2..4196eb6bd76 100644
--- a/arch/microblaze/pci/indirect_pci.c
+++ b/arch/microblaze/pci/indirect_pci.c
@@ -108,7 +108,7 @@ indirect_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
out_le32(hose->cfg_addr, (0x80000000 | (bus_no << 16) |
(devfn << 8) | reg | cfg_type));
- /* surpress setting of PCI_PRIMARY_BUS */
+ /* suppress setting of PCI_PRIMARY_BUS */
if (hose->indirect_type & INDIRECT_TYPE_SURPRESS_PRIMARY_BUS)
if ((offset == PCI_PRIMARY_BUS) &&
(bus->number == hose->first_busno))
diff --git a/arch/microblaze/platform/generic/Kconfig.auto b/arch/microblaze/platform/generic/Kconfig.auto
index 5d86fc19029..25a6f019e94 100644
--- a/arch/microblaze/platform/generic/Kconfig.auto
+++ b/arch/microblaze/platform/generic/Kconfig.auto
@@ -29,7 +29,7 @@ config KERNEL_BASE_ADDR
BASE Address for kernel
config XILINX_MICROBLAZE0_FAMILY
- string "Targetted FPGA family"
+ string "Targeted FPGA family"
default "virtex5"
config XILINX_MICROBLAZE0_USE_MSR_INSTR