MIPS: Alchemy: abstract USB block control register access

Alchemy chips have one or more registers which control access
to the usb blocks as well as PHY configuration.  I don't want
the OHCI/EHCI glues to know about the different registers and bits;
new code hides the gory details of USB configuration from them.

Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
To: Linux-MIPS <linux-mips@linux-mips.org>
Cc: linux-usb@vger.kernel.org
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Patchwork: https://patchwork.linux-mips.org/patch/2709/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

 create mode 100644 drivers/usb/host/alchemy-common.c

2 files changed, 6 insertions, 48 deletions

diff --git a/arch/mips/alchemy/common/dma.c b/arch/mips/alchemy/common/dma.c
index 347980e79a8..6652a237b92 100644
--- a/arch/mips/alchemy/common/dma.c
+++ b/arch/mips/alchemy/common/dma.c
@@ -88,12 +88,12 @@ static const struct dma_dev {
 	{ AU1000_AC97_PHYS_ADDR + 0x08, DMA_DW16 | DMA_DR },	/* AC97 RX c */
 	{ AU1000_UART3_PHYS_ADDR + 0x04, DMA_DW8 | DMA_NC },	/* UART3_TX */
 	{ AU1000_UART3_PHYS_ADDR + 0x00, DMA_DW8 | DMA_NC | DMA_DR }, /* UART3_RX */
-	{ AU1000_USBD_PHYS_ADDR + 0x00, DMA_DW8 | DMA_NC | DMA_DR }, /* EP0RD */
-	{ AU1000_USBD_PHYS_ADDR + 0x04, DMA_DW8 | DMA_NC }, /* EP0WR */
-	{ AU1000_USBD_PHYS_ADDR + 0x08, DMA_DW8 | DMA_NC }, /* EP2WR */
-	{ AU1000_USBD_PHYS_ADDR + 0x0c, DMA_DW8 | DMA_NC }, /* EP3WR */
-	{ AU1000_USBD_PHYS_ADDR + 0x10, DMA_DW8 | DMA_NC | DMA_DR }, /* EP4RD */
-	{ AU1000_USBD_PHYS_ADDR + 0x14, DMA_DW8 | DMA_NC | DMA_DR }, /* EP5RD */
+	{ AU1000_USB_UDC_PHYS_ADDR + 0x00, DMA_DW8 | DMA_NC | DMA_DR }, /* EP0RD */
+	{ AU1000_USB_UDC_PHYS_ADDR + 0x04, DMA_DW8 | DMA_NC }, /* EP0WR */
+	{ AU1000_USB_UDC_PHYS_ADDR + 0x08, DMA_DW8 | DMA_NC }, /* EP2WR */
+	{ AU1000_USB_UDC_PHYS_ADDR + 0x0c, DMA_DW8 | DMA_NC }, /* EP3WR */
+	{ AU1000_USB_UDC_PHYS_ADDR + 0x10, DMA_DW8 | DMA_NC | DMA_DR }, /* EP4RD */
+	{ AU1000_USB_UDC_PHYS_ADDR + 0x14, DMA_DW8 | DMA_NC | DMA_DR }, /* EP5RD */
 	/* on Au1500, these 2 are DMA_REQ2/3 (GPIO208/209) instead! */
 	{ AU1000_I2S_PHYS_ADDR + 0x00, DMA_DW32 | DMA_NC},	/* I2S TX */
 	{ AU1000_I2S_PHYS_ADDR + 0x00, DMA_DW32 | DMA_NC | DMA_DR}, /* I2S RX */
diff --git a/arch/mips/alchemy/common/power.c b/arch/mips/alchemy/common/power.c
index 9ec85597bbf..bdd6651e9a4 100644
--- a/arch/mips/alchemy/common/power.c
+++ b/arch/mips/alchemy/common/power.c
@@ -47,7 +47,6 @@
  * We only have to save/restore registers that aren't otherwise
  * done as part of a driver pm_* function.
  */
-static unsigned int sleep_usb[2];
 static unsigned int sleep_sys_clocks[5];
 static unsigned int sleep_sys_pinfunc;
 static unsigned int sleep_static_memctlr[4][3];
@@ -55,31 +54,6 @@ static unsigned int sleep_static_memctlr[4][3];
 
 static void save_core_regs(void)
 {
-#ifndef CONFIG_SOC_AU1200
-	/* Shutdown USB host/device. */
-	sleep_usb[0] = au_readl(USB_HOST_CONFIG);
-
-	/* There appears to be some undocumented reset register.... */
-	au_writel(0, 0xb0100004);
-	au_sync();
-	au_writel(0, USB_HOST_CONFIG);
-	au_sync();
-
-	sleep_usb[1] = au_readl(USBD_ENABLE);
-	au_writel(0, USBD_ENABLE);
-	au_sync();
-
-#else	/* AU1200 */
-
-	/* enable access to OTG mmio so we can save OTG CAP/MUX.
-	 * FIXME: write an OTG driver and move this stuff there!
-	 */
-	au_writel(au_readl(USB_MSR_BASE + 4) | (1 << 6), USB_MSR_BASE + 4);
-	au_sync();
-	sleep_usb[0] = au_readl(0xb4020020);	/* OTG_CAP */
-	sleep_usb[1] = au_readl(0xb4020024);	/* OTG_MUX */
-#endif
-
 	/* Clocks and PLLs. */
 	sleep_sys_clocks[0] = au_readl(SYS_FREQCTRL0);
 	sleep_sys_clocks[1] = au_readl(SYS_FREQCTRL1);
@@ -123,22 +97,6 @@ static void restore_core_regs(void)
 	au_writel(sleep_sys_pinfunc, SYS_PINFUNC);
 	au_sync();
 
-#ifndef CONFIG_SOC_AU1200
-	au_writel(sleep_usb[0], USB_HOST_CONFIG);
-	au_writel(sleep_usb[1], USBD_ENABLE);
-	au_sync();
-#else
-	/* enable access to OTG memory */
-	au_writel(au_readl(USB_MSR_BASE + 4) | (1 << 6), USB_MSR_BASE + 4);
-	au_sync();
-
-	/* restore OTG caps and port mux. */
-	au_writel(sleep_usb[0], 0xb4020020 + 0);	/* OTG_CAP */
-	au_sync();
-	au_writel(sleep_usb[1], 0xb4020020 + 4);	/* OTG_MUX */
-	au_sync();
-#endif
-
 	/* Restore the static memory controller configuration. */
 	au_writel(sleep_static_memctlr[0][0], MEM_STCFG0);
 	au_writel(sleep_static_memctlr[0][1], MEM_STTIME0);