MIPS: Alchemy: move calc_clock function.

Now that nothing in time.c depends on calc_clock, it can
be moved to clocks.c where it belongs.
While at it, give it a better non-generic name and call it
as soon as possible in plat_mem_init.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

3 files changed, 63 insertions, 54 deletions

diff --git a/arch/mips/alchemy/common/clocks.c b/arch/mips/alchemy/common/clocks.c
index a8170fda493..d8991854530 100644
--- a/arch/mips/alchemy/common/clocks.c
+++ b/arch/mips/alchemy/common/clocks.c
@@ -27,11 +27,21 @@
  */
 
 #include <linux/module.h>
+#include <linux/spinlock.h>
+#include <asm/time.h>
 #include <asm/mach-au1x00/au1000.h>
 
+/*
+ * I haven't found anyone that doesn't use a 12 MHz source clock,
+ * but just in case.....
+ */
+#define AU1000_SRC_CLK	12000000
+
 static unsigned int au1x00_clock; /*  Hz */
 static unsigned long uart_baud_base;
 
+static DEFINE_SPINLOCK(time_lock);
+
 /*
  * Set the au1000_clock
  */
@@ -60,3 +70,47 @@ void set_au1x00_uart_baud_base(unsigned long new_baud_base)
 {
 	uart_baud_base = new_baud_base;
 }
+
+/*
+ * We read the real processor speed from the PLL.  This is important
+ * because it is more accurate than computing it from the 32 KHz
+ * counter, if it exists.  If we don't have an accurate processor
+ * speed, all of the peripherals that derive their clocks based on
+ * this advertised speed will introduce error and sometimes not work
+ * properly.  This function is futher convoluted to still allow configurations
+ * to do that in case they have really, really old silicon with a
+ * write-only PLL register.			-- Dan
+ */
+unsigned long au1xxx_calc_clock(void)
+{
+	unsigned long cpu_speed;
+	unsigned long flags;
+
+	spin_lock_irqsave(&time_lock, flags);
+
+	/*
+	 * On early Au1000, sys_cpupll was write-only. Since these
+	 * silicon versions of Au1000 are not sold by AMD, we don't bend
+	 * over backwards trying to determine the frequency.
+	 */
+	if (au1xxx_cpu_has_pll_wo())
+#ifdef CONFIG_SOC_AU1000_FREQUENCY
+		cpu_speed = CONFIG_SOC_AU1000_FREQUENCY;
+#else
+		cpu_speed = 396000000;
+#endif
+	else
+		cpu_speed = (au_readl(SYS_CPUPLL) & 0x0000003f) * AU1000_SRC_CLK;
+
+	/* On Alchemy CPU:counter ratio is 1:1 */
+	mips_hpt_frequency = cpu_speed;
+	/* Equation: Baudrate = CPU / (SD * 2 * CLKDIV * 16) */
+	set_au1x00_uart_baud_base(cpu_speed / (2 * ((int)(au_readl(SYS_POWERCTRL)
+							  & 0x03) + 2) * 16));
+
+	spin_unlock_irqrestore(&time_lock, flags);
+
+	set_au1x00_speed(cpu_speed);
+
+	return cpu_speed;
+}
diff --git a/arch/mips/alchemy/common/setup.c b/arch/mips/alchemy/common/setup.c
index 8ad453af2c6..3f036b3d400 100644
--- a/arch/mips/alchemy/common/setup.c
+++ b/arch/mips/alchemy/common/setup.c
@@ -44,6 +44,15 @@ extern void set_cpuspec(void);
 
 void __init plat_mem_setup(void)
 {
+	unsigned long est_freq;
+
+	/* determine core clock */
+	est_freq = au1xxx_calc_clock();
+	est_freq += 5000;    /* round */
+	est_freq -= est_freq % 10000;
+	printk(KERN_INFO "(PRId %08x) @ %lu.%02lu MHz\n", read_c0_prid(),
+	       est_freq / 1000000, ((est_freq % 1000000) * 100) / 1000000);
+
 	_machine_restart = au1000_restart;
 	_machine_halt = au1000_halt;
 	pm_power_off = au1000_power_off;
diff --git a/arch/mips/alchemy/common/time.c b/arch/mips/alchemy/common/time.c
index 57f0aec590b..32880146cbc 100644
--- a/arch/mips/alchemy/common/time.c
+++ b/arch/mips/alchemy/common/time.c
@@ -44,53 +44,6 @@
 
 extern int allow_au1k_wait; /* default off for CP0 Counter */
 
-static DEFINE_SPINLOCK(time_lock);
-
-/*
- * I haven't found anyone that doesn't use a 12 MHz source clock,
- * but just in case.....
- */
-#define AU1000_SRC_CLK	12000000
-
-/*
- * We read the real processor speed from the PLL.  This is important
- * because it is more accurate than computing it from the 32 KHz
- * counter, if it exists.  If we don't have an accurate processor
- * speed, all of the peripherals that derive their clocks based on
- * this advertised speed will introduce error and sometimes not work
- * properly.  This function is futher convoluted to still allow configurations
- * to do that in case they have really, really old silicon with a
- * write-only PLL register.			-- Dan
- */
-unsigned long calc_clock(void)
-{
-	unsigned long cpu_speed;
-	unsigned long flags;
-
-	spin_lock_irqsave(&time_lock, flags);
-
-	/*
-	 * On early Au1000, sys_cpupll was write-only. Since these
-	 * silicon versions of Au1000 are not sold by AMD, we don't bend
-	 * over backwards trying to determine the frequency.
-	 */
-	if (au1xxx_cpu_has_pll_wo())
-#ifdef CONFIG_SOC_AU1000_FREQUENCY
-		cpu_speed = CONFIG_SOC_AU1000_FREQUENCY;
-#else
-		cpu_speed = 396000000;
-#endif
-	else
-		cpu_speed = (au_readl(SYS_CPUPLL) & 0x0000003f) * AU1000_SRC_CLK;
-	/* On Alchemy CPU:counter ratio is 1:1 */
-	mips_hpt_frequency = cpu_speed;
-	/* Equation: Baudrate = CPU / (SD * 2 * CLKDIV * 16) */
-	set_au1x00_uart_baud_base(cpu_speed / (2 * ((int)(au_readl(SYS_POWERCTRL)
-							  & 0x03) + 2) * 16));
-	spin_unlock_irqrestore(&time_lock, flags);
-	return cpu_speed;
-}
-
 static cycle_t au1x_counter1_read(void)
 {
 	return au_readl(SYS_RTCREAD);
@@ -150,13 +103,6 @@ void __init plat_time_init(void)
 {
 	struct clock_event_device *cd = &au1x_rtcmatch2_clockdev;
 	unsigned long t;
-	unsigned int est_freq = calc_clock();
-
-	est_freq += 5000;    /* round */
-	est_freq -= est_freq%10000;
-	printk(KERN_INFO "(PRId %08x) @ %u.%02u MHz\n", read_c0_prid(),
-	       est_freq / 1000000, ((est_freq % 1000000) * 100) / 1000000);
-	set_au1x00_speed(est_freq);
 
 	/* Check if firmware (YAMON, ...) has enabled 32kHz and clock
 	 * has been detected.  If so install the rtcmatch2 clocksource,