MIPS: Alchemy: Merge PB1200 support into DB1200 code.

The PB1200 is basically a DB1200 with additional MMC and camera sockets
and different base addresses for external hardware (CPLD, IDE, Net, NAND).

This patch implements the missing PB1200 features in DB1200 support code
and runtime board detection.

Tested on DB1200 only.

Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2880/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

1 files changed, 227 insertions, 18 deletions

diff --git a/arch/mips/alchemy/devboards/db1200.c b/arch/mips/alchemy/devboards/db1200.c
index e2cc5f92153..ec481f33aec 100644
--- a/arch/mips/alchemy/devboards/db1200.c
+++ b/arch/mips/alchemy/devboards/db1200.c
@@ -1,5 +1,5 @@
 /*
- * DBAu1200 board platform device registration
+ * DBAu1200/PBAu1200 board platform device registration
  *
  * Copyright (C) 2008-2011 Manuel Lauss
  *
@@ -44,10 +44,41 @@
 
 #include "platform.h"
 
+static const char *board_type_str(void)
+{
+	switch (BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI))) {
+	case BCSR_WHOAMI_PB1200_DDR1:
+	case BCSR_WHOAMI_PB1200_DDR2:
+		return "PB1200";
+	case BCSR_WHOAMI_DB1200:
+		return "DB1200";
+	default:
+		return "(unknown)";
+	}
+}
 
 const char *get_system_type(void)
 {
-	return "DB1200";
+	return board_type_str();
+}
+
+static int __init detect_board(void)
+{
+	int bid;
+
+	/* try the PB1200 first */
+	bcsr_init(PB1200_BCSR_PHYS_ADDR,
+		  PB1200_BCSR_PHYS_ADDR + PB1200_BCSR_HEXLED_OFS);
+	bid = BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI));
+	if ((bid == BCSR_WHOAMI_PB1200_DDR1) ||
+	    (bid == BCSR_WHOAMI_PB1200_DDR2))
+		return 0;
+
+	/* okay, try the DB1200 then */
+	bcsr_init(DB1200_BCSR_PHYS_ADDR,
+		  DB1200_BCSR_PHYS_ADDR + DB1200_BCSR_HEXLED_OFS);
+	bid = BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI));
+	return bid == BCSR_WHOAMI_DB1200 ? 0 : 1;
 }
 
 void __init board_setup(void)
@@ -55,12 +86,14 @@ void __init board_setup(void)
 	unsigned long freq0, clksrc, div, pfc;
 	unsigned short whoami;
 
-	bcsr_init(DB1200_BCSR_PHYS_ADDR,
-		  DB1200_BCSR_PHYS_ADDR + DB1200_BCSR_HEXLED_OFS);
+	if (detect_board()) {
+		printk(KERN_ERR "NOT running on a DB1200/PB1200 board!\n");
+		return;
+	}
 
 	whoami = bcsr_read(BCSR_WHOAMI);
-	printk(KERN_INFO "Alchemy/AMD/RMI DB1200 Board, CPLD Rev %d"
-		"  Board-ID %d  Daughtercard ID %d\n",
+	printk(KERN_INFO "Alchemy/AMD/RMI %s Board, CPLD Rev %d"
+		"  Board-ID %d  Daughtercard ID %d\n", board_type_str(),
 		(whoami >> 4) & 0xf, (whoami >> 8) & 0xf, whoami & 0xf);
 
 	/* SMBus/SPI on PSC0, Audio on PSC1 */
@@ -96,7 +129,7 @@ void __init board_setup(void)
 
 static struct mtd_partition db1200_spiflash_parts[] = {
 	{
-		.name	= "DB1200 SPI flash",
+		.name	= "spi_flash",
 		.offset	= 0,
 		.size	= MTDPART_SIZ_FULL,
 	},
@@ -376,12 +409,109 @@ static struct led_classdev db1200_mmc_led = {
 	.brightness_set	= db1200_mmcled_set,
 };
 
-static struct au1xmmc_platform_data db1200mmc_platdata = {
-	.cd_setup	= db1200_mmc_cd_setup,
-	.set_power	= db1200_mmc_set_power,
-	.card_inserted	= db1200_mmc_card_inserted,
-	.card_readonly	= db1200_mmc_card_readonly,
-	.led		= &db1200_mmc_led,
+/* -- */
+
+static irqreturn_t pb1200_mmc1_cd(int irq, void *ptr)
+{
+	void(*mmc_cd)(struct mmc_host *, unsigned long);
+
+	if (irq == PB1200_SD1_INSERT_INT) {
+		disable_irq_nosync(PB1200_SD1_INSERT_INT);
+		enable_irq(PB1200_SD1_EJECT_INT);
+	} else {
+		disable_irq_nosync(PB1200_SD1_EJECT_INT);
+		enable_irq(PB1200_SD1_INSERT_INT);
+	}
+
+	/* link against CONFIG_MMC=m */
+	mmc_cd = symbol_get(mmc_detect_change);
+	if (mmc_cd) {
+		mmc_cd(ptr, msecs_to_jiffies(500));
+		symbol_put(mmc_detect_change);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int pb1200_mmc1_cd_setup(void *mmc_host, int en)
+{
+	int ret;
+
+	if (en) {
+		ret = request_irq(PB1200_SD1_INSERT_INT, pb1200_mmc1_cd, 0,
+				  "sd1_insert", mmc_host);
+		if (ret)
+			goto out;
+
+		ret = request_irq(PB1200_SD1_EJECT_INT, pb1200_mmc1_cd, 0,
+				  "sd1_eject", mmc_host);
+		if (ret) {
+			free_irq(PB1200_SD1_INSERT_INT, mmc_host);
+			goto out;
+		}
+
+		if (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD1INSERT)
+			enable_irq(PB1200_SD1_EJECT_INT);
+		else
+			enable_irq(PB1200_SD1_INSERT_INT);
+
+	} else {
+		free_irq(PB1200_SD1_INSERT_INT, mmc_host);
+		free_irq(PB1200_SD1_EJECT_INT, mmc_host);
+	}
+	ret = 0;
+out:
+	return ret;
+}
+
+static void pb1200_mmc1led_set(struct led_classdev *led,
+			enum led_brightness brightness)
+{
+	if (brightness != LED_OFF)
+			bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED1, 0);
+	else
+			bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED1);
+}
+
+static struct led_classdev pb1200_mmc1_led = {
+	.brightness_set	= pb1200_mmc1led_set,
+};
+
+static void pb1200_mmc1_set_power(void *mmc_host, int state)
+{
+	if (state) {
+		bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_SD1PWR);
+		msleep(400);	/* stabilization time */
+	} else
+		bcsr_mod(BCSR_BOARD, BCSR_BOARD_SD1PWR, 0);
+}
+
+static int pb1200_mmc1_card_readonly(void *mmc_host)
+{
+	return (bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD1WP) ? 1 : 0;
+}
+
+static int pb1200_mmc1_card_inserted(void *mmc_host)
+{
+	return (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD1INSERT) ? 1 : 0;
+}
+
+
+static struct au1xmmc_platform_data db1200_mmc_platdata[2] = {
+	[0] = {
+		.cd_setup	= db1200_mmc_cd_setup,
+		.set_power	= db1200_mmc_set_power,
+		.card_inserted	= db1200_mmc_card_inserted,
+		.card_readonly	= db1200_mmc_card_readonly,
+		.led		= &db1200_mmc_led,
+	},
+	[1] = {
+		.cd_setup	= pb1200_mmc1_cd_setup,
+		.set_power	= pb1200_mmc1_set_power,
+		.card_inserted	= pb1200_mmc1_card_inserted,
+		.card_readonly	= pb1200_mmc1_card_readonly,
+		.led		= &pb1200_mmc1_led,
+	},
 };
 
 static struct resource au1200_mmc0_resources[] = {
@@ -415,12 +545,47 @@ static struct platform_device db1200_mmc0_dev = {
 	.dev = {
 		.dma_mask		= &au1xxx_mmc_dmamask,
 		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data		= &db1200mmc_platdata,
+		.platform_data		= &db1200_mmc_platdata[0],
 	},
 	.num_resources	= ARRAY_SIZE(au1200_mmc0_resources),
 	.resource	= au1200_mmc0_resources,
 };
 
+static struct resource au1200_mmc1_res[] = {
+	[0] = {
+		.start	= AU1100_SD1_PHYS_ADDR,
+		.end	= AU1100_SD1_PHYS_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1200_SD_INT,
+		.end	= AU1200_SD_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= AU1200_DSCR_CMD0_SDMS_TX1,
+		.end	= AU1200_DSCR_CMD0_SDMS_TX1,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start	= AU1200_DSCR_CMD0_SDMS_RX1,
+		.end	= AU1200_DSCR_CMD0_SDMS_RX1,
+		.flags	= IORESOURCE_DMA,
+	}
+};
+
+static struct platform_device pb1200_mmc1_dev = {
+	.name		= "au1xxx-mmc",
+	.id		= 1,
+	.dev = {
+		.dma_mask		= &au1xxx_mmc_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= &db1200_mmc_platdata[1],
+	},
+	.num_resources	= ARRAY_SIZE(au1200_mmc1_res),
+	.resource	= au1200_mmc1_res,
+};
+
 /**********************************************************************/
 
 static int db1200fb_panel_index(void)
@@ -598,14 +763,50 @@ static struct platform_device *db1200_devs[] __initdata = {
 	&db1200_sound_dev,
 };
 
+static struct platform_device *pb1200_devs[] __initdata = {
+	&pb1200_mmc1_dev,
+};
+
+/* Some peripheral base addresses differ on the PB1200 */
+static int __init pb1200_res_fixup(void)
+{
+	/* CPLD Revs earlier than 4 cause problems */
+	if (BCSR_WHOAMI_CPLD(bcsr_read(BCSR_WHOAMI)) <= 3) {
+		printk(KERN_ERR "WARNING!!!\n");
+		printk(KERN_ERR "WARNING!!!\n");
+		printk(KERN_ERR "PB1200 must be at CPLD rev 4. Please have\n");
+		printk(KERN_ERR "the board updated to latest revisions.\n");
+		printk(KERN_ERR "This software will not work reliably\n");
+		printk(KERN_ERR "on anything older than CPLD rev 4.!\n");
+		printk(KERN_ERR "WARNING!!!\n");
+		printk(KERN_ERR "WARNING!!!\n");
+		return 1;
+	}
+
+	db1200_nand_res[0].start = PB1200_NAND_PHYS_ADDR;
+	db1200_nand_res[0].end   = PB1200_NAND_PHYS_ADDR + 0xff;
+	db1200_ide_res[0].start = PB1200_IDE_PHYS_ADDR;
+	db1200_ide_res[0].end   = PB1200_IDE_PHYS_ADDR + DB1200_IDE_PHYS_LEN - 1;
+	db1200_eth_res[0].start = PB1200_ETH_PHYS_ADDR;
+	db1200_eth_res[0].end   = PB1200_ETH_PHYS_ADDR + 0xff;
+	return 0;
+}
+
 static int __init db1200_dev_init(void)
 {
 	unsigned long pfc;
 	unsigned short sw;
-	int swapped;
+	int swapped, bid;
+
+	bid = BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI));
+	if ((bid == BCSR_WHOAMI_PB1200_DDR1) ||
+	    (bid == BCSR_WHOAMI_PB1200_DDR2)) {
+		if (pb1200_res_fixup())
+			return -ENODEV;
+	}
 
 	/* GPIO7 is low-level triggered CPLD cascade */
-	irq_set_irq_type(AU1200_GPIO7_INT, IRQF_TRIGGER_LOW);
+	irq_set_irq_type(AU1200_GPIO7_INT, IRQ_TYPE_LEVEL_LOW);
 	bcsr_init_irq(DB1200_INT_BEGIN, DB1200_INT_END, AU1200_GPIO7_INT);
 
 	/* insert/eject pairs: one of both is always screaming.  To avoid
@@ -626,6 +827,7 @@ static int __init db1200_dev_init(void)
 
 	/* SWITCHES:	S6.8 I2C/SPI selector  (OFF=I2C  ON=SPI)
 	 *		S6.7 AC97/I2S selector (OFF=AC97 ON=I2S)
+	 *		or S12 on the PB1200.
 	 */
 
 	/* NOTE: GPIO215 controls OTG VBUS supply.  In SPI mode however
@@ -640,7 +842,7 @@ static int __init db1200_dev_init(void)
 	gpio_request(215, "otg-vbus");
 	gpio_direction_output(215, 1);
 
-	printk(KERN_INFO "DB1200 device configuration:\n");
+	printk(KERN_INFO "%s device configuration:\n", board_type_str());
 
 	sw = bcsr_read(BCSR_SWITCHES);
 	if (sw & BCSR_SWITCHES_DIP_8) {
@@ -707,6 +909,13 @@ static int __init db1200_dev_init(void)
 	swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1200_SWAPBOOT;
 	db1x_register_norflash(64 << 20, 2, swapped);
 
-	return platform_add_devices(db1200_devs, ARRAY_SIZE(db1200_devs));
+	platform_add_devices(db1200_devs, ARRAY_SIZE(db1200_devs));
+
+	/* PB1200 is a DB1200 with a 2nd MMC and Camera connector */
+	if ((bid == BCSR_WHOAMI_PB1200_DDR1) ||
+	    (bid == BCSR_WHOAMI_PB1200_DDR2))
+		platform_add_devices(pb1200_devs, ARRAY_SIZE(pb1200_devs));
+
+	return 0;
 }
 device_initcall(db1200_dev_init);