diff options
| author | Manuel Lauss <manuel.lauss@googlemail.com> | 2011-11-10 12:06:21 +0000 |
|---|---|---|
| committer | Ralf Baechle <ralf@linux-mips.org> | 2011-12-07 22:02:06 +0000 |
| commit | 7c4b24da07d99b5473de7cc7ba3f67d85b889bc0 (patch) | |
| tree | ec1369de73ee0e682c07377b933706600a6725ff /arch/mips/alchemy/devboards | |
| parent | 8e026910fcd46c3cfcdf5cff7ebba013bb8ec85c (diff) | |
MIPS: Alchemy: merge devboard code into single per-board files.
Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2884/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Diffstat (limited to 'arch/mips/alchemy/devboards')
19 files changed, 464 insertions, 748 deletions
diff --git a/arch/mips/alchemy/devboards/Makefile b/arch/mips/alchemy/devboards/Makefile index 3467ec94d8b..f5628523c69 100644 --- a/arch/mips/alchemy/devboards/Makefile +++ b/arch/mips/alchemy/devboards/Makefile @@ -4,13 +4,13 @@ obj-y += prom.o bcsr.o platform.o obj-$(CONFIG_PM) += pm.o -obj-$(CONFIG_MIPS_PB1100) += pb1100/ -obj-$(CONFIG_MIPS_PB1200) += pb1200/ -obj-$(CONFIG_MIPS_PB1500) += pb1500/ -obj-$(CONFIG_MIPS_PB1550) += pb1550/ -obj-$(CONFIG_MIPS_DB1000) += db1x00/ -obj-$(CONFIG_MIPS_DB1100) += db1x00/ -obj-$(CONFIG_MIPS_DB1200) += db1200/ +obj-$(CONFIG_MIPS_PB1100) += pb1100.o +obj-$(CONFIG_MIPS_PB1200) += pb1200.o +obj-$(CONFIG_MIPS_PB1500) += pb1500.o +obj-$(CONFIG_MIPS_PB1550) += pb1550.o +obj-$(CONFIG_MIPS_DB1000) += db1x00.o +obj-$(CONFIG_MIPS_DB1100) += db1x00.o +obj-$(CONFIG_MIPS_DB1200) += db1200.o obj-$(CONFIG_MIPS_DB1300) += db1300.o -obj-$(CONFIG_MIPS_DB1500) += db1x00/ +obj-$(CONFIG_MIPS_DB1500) += db1x00.o obj-$(CONFIG_MIPS_DB1550) += db1550.o diff --git a/arch/mips/alchemy/devboards/db1200/platform.c b/arch/mips/alchemy/devboards/db1200.c index c61867c93c4..43f5f1be9d6 100644 --- a/arch/mips/alchemy/devboards/db1200/platform.c +++ b/arch/mips/alchemy/devboards/db1200.c @@ -1,7 +1,7 @@ /* * DBAu1200 board platform device registration * - * Copyright (C) 2008-2009 Manuel Lauss + * Copyright (C) 2008-2011 Manuel Lauss * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -22,6 +22,7 @@ #include <linux/gpio.h> #include <linux/i2c.h> #include <linux/init.h> +#include <linux/interrupt.h> #include <linux/io.h> #include <linux/leds.h> #include <linux/mmc/host.h> @@ -33,14 +34,64 @@ #include <linux/spi/spi.h> #include <linux/spi/flash.h> #include <linux/smc91x.h> - +#include <asm/mach-au1x00/au1000.h> #include <asm/mach-au1x00/au1100_mmc.h> #include <asm/mach-au1x00/au1xxx_dbdma.h> #include <asm/mach-au1x00/au1550_spi.h> #include <asm/mach-db1x00/bcsr.h> #include <asm/mach-db1x00/db1200.h> -#include "../platform.h" +#include "platform.h" + + +const char *get_system_type(void) +{ + return "DB1200"; +} + +void __init board_setup(void) +{ + unsigned long freq0, clksrc, div, pfc; + unsigned short whoami; + + bcsr_init(DB1200_BCSR_PHYS_ADDR, + DB1200_BCSR_PHYS_ADDR + DB1200_BCSR_HEXLED_OFS); + + whoami = bcsr_read(BCSR_WHOAMI); + printk(KERN_INFO "Alchemy/AMD/RMI DB1200 Board, CPLD Rev %d" + " Board-ID %d Daughtercard ID %d\n", + (whoami >> 4) & 0xf, (whoami >> 8) & 0xf, whoami & 0xf); + + /* SMBus/SPI on PSC0, Audio on PSC1 */ + pfc = __raw_readl((void __iomem *)SYS_PINFUNC); + pfc &= ~(SYS_PINFUNC_P0A | SYS_PINFUNC_P0B); + pfc &= ~(SYS_PINFUNC_P1A | SYS_PINFUNC_P1B | SYS_PINFUNC_FS3); + pfc |= SYS_PINFUNC_P1C; /* SPI is configured later */ + __raw_writel(pfc, (void __iomem *)SYS_PINFUNC); + wmb(); + + /* Clock configurations: PSC0: ~50MHz via Clkgen0, derived from + * CPU clock; all other clock generators off/unused. + */ + div = (get_au1x00_speed() + 25000000) / 50000000; + if (div & 1) + div++; + div = ((div >> 1) - 1) & 0xff; + + freq0 = div << SYS_FC_FRDIV0_BIT; + __raw_writel(freq0, (void __iomem *)SYS_FREQCTRL0); + wmb(); + freq0 |= SYS_FC_FE0; /* enable F0 */ + __raw_writel(freq0, (void __iomem *)SYS_FREQCTRL0); + wmb(); + + /* psc0_intclk comes 1:1 from F0 */ + clksrc = SYS_CS_MUX_FQ0 << SYS_CS_ME0_BIT; + __raw_writel(clksrc, (void __iomem *)SYS_CLKSRC); + wmb(); +} + +/******************************************************************************/ static struct mtd_partition db1200_spiflash_parts[] = { { @@ -78,18 +129,9 @@ static struct spi_board_info db1200_spi_devs[] __initdata = { }; static struct i2c_board_info db1200_i2c_devs[] __initdata = { - { - /* AT24C04-10 I2C eeprom */ - I2C_BOARD_INFO("24c04", 0x52), - }, - { - /* Philips NE1619 temp/voltage sensor (adm1025 drv) */ - I2C_BOARD_INFO("ne1619", 0x2d), - }, - { - /* I2S audio codec WM8731 */ - I2C_BOARD_INFO("wm8731", 0x1b), - }, + { I2C_BOARD_INFO("24c04", 0x52), }, /* AT24C04-10 I2C eeprom */ + { I2C_BOARD_INFO("ne1619", 0x2d), }, /* adm1025-compat hwmon */ + { I2C_BOARD_INFO("wm8731", 0x1b), }, /* I2S audio codec WM8731 */ }; /**********************************************************************/ @@ -206,7 +248,7 @@ static struct platform_device db1200_eth_dev = { static struct resource db1200_ide_res[] = { [0] = { .start = DB1200_IDE_PHYS_ADDR, - .end = DB1200_IDE_PHYS_ADDR + DB1200_IDE_PHYS_LEN - 1, + .end = DB1200_IDE_PHYS_ADDR + DB1200_IDE_PHYS_LEN - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -221,13 +263,13 @@ static struct resource db1200_ide_res[] = { }, }; -static u64 ide_dmamask = DMA_BIT_MASK(32); +static u64 au1200_ide_dmamask = DMA_BIT_MASK(32); static struct platform_device db1200_ide_dev = { .name = "au1200-ide", .id = 0, .dev = { - .dma_mask = &ide_dmamask, + .dma_mask = &au1200_ide_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), }, .num_resources = ARRAY_SIZE(db1200_ide_res), @@ -533,6 +575,21 @@ static int __init db1200_dev_init(void) unsigned short sw; int swapped; + /* GPIO7 is low-level triggered CPLD cascade */ + irq_set_irq_type(AU1200_GPIO7_INT, IRQF_TRIGGER_LOW); + bcsr_init_irq(DB1200_INT_BEGIN, DB1200_INT_END, AU1200_GPIO7_INT); + + /* insert/eject pairs: one of both is always screaming. To avoid + * issues they must not be automatically enabled when initially + * requested. + */ + irq_set_status_flags(DB1200_SD0_INSERT_INT, IRQ_NOAUTOEN); + irq_set_status_flags(DB1200_SD0_EJECT_INT, IRQ_NOAUTOEN); + irq_set_status_flags(DB1200_PC0_INSERT_INT, IRQ_NOAUTOEN); + irq_set_status_flags(DB1200_PC0_EJECT_INT, IRQ_NOAUTOEN); + irq_set_status_flags(DB1200_PC1_INSERT_INT, IRQ_NOAUTOEN); + irq_set_status_flags(DB1200_PC1_EJECT_INT, IRQ_NOAUTOEN); + i2c_register_board_info(0, db1200_i2c_devs, ARRAY_SIZE(db1200_i2c_devs)); spi_register_board_info(db1200_spi_devs, @@ -595,7 +652,7 @@ static int __init db1200_dev_init(void) /* Audio PSC clock is supplied externally. (FIXME: platdata!!) */ __raw_writel(PSC_SEL_CLK_SERCLK, - (void __iomem *)KSEG1ADDR(AU1550_PSC1_PHYS_ADDR) + PSC_SEL_OFFSET); + (void __iomem *)KSEG1ADDR(AU1550_PSC1_PHYS_ADDR) + PSC_SEL_OFFSET); wmb(); db1x_register_pcmcia_socket( diff --git a/arch/mips/alchemy/devboards/db1200/Makefile b/arch/mips/alchemy/devboards/db1200/Makefile deleted file mode 100644 index 17840a5e273..00000000000 --- a/arch/mips/alchemy/devboards/db1200/Makefile +++ /dev/null @@ -1 +0,0 @@ -obj-y += setup.o platform.o diff --git a/arch/mips/alchemy/devboards/db1200/setup.c b/arch/mips/alchemy/devboards/db1200/setup.c deleted file mode 100644 index 4a8980027ec..00000000000 --- a/arch/mips/alchemy/devboards/db1200/setup.c +++ /dev/null @@ -1,81 +0,0 @@ -/* - * Alchemy/AMD/RMI DB1200 board setup. - * - * Licensed under the terms outlined in the file COPYING in the root of - * this source archive. - */ - -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/io.h> -#include <linux/kernel.h> -#include <asm/mach-au1x00/au1000.h> -#include <asm/mach-db1x00/bcsr.h> -#include <asm/mach-db1x00/db1200.h> - -const char *get_system_type(void) -{ - return "Alchemy Db1200"; -} - -void __init board_setup(void) -{ - unsigned long freq0, clksrc, div, pfc; - unsigned short whoami; - - bcsr_init(DB1200_BCSR_PHYS_ADDR, - DB1200_BCSR_PHYS_ADDR + DB1200_BCSR_HEXLED_OFS); - - whoami = bcsr_read(BCSR_WHOAMI); - printk(KERN_INFO "Alchemy/AMD/RMI DB1200 Board, CPLD Rev %d" - " Board-ID %d Daughtercard ID %d\n", - (whoami >> 4) & 0xf, (whoami >> 8) & 0xf, whoami & 0xf); - - /* SMBus/SPI on PSC0, Audio on PSC1 */ - pfc = __raw_readl((void __iomem *)SYS_PINFUNC); - pfc &= ~(SYS_PINFUNC_P0A | SYS_PINFUNC_P0B); - pfc &= ~(SYS_PINFUNC_P1A | SYS_PINFUNC_P1B | SYS_PINFUNC_FS3); - pfc |= SYS_PINFUNC_P1C; /* SPI is configured later */ - __raw_writel(pfc, (void __iomem *)SYS_PINFUNC); - wmb(); - - /* Clock configurations: PSC0: ~50MHz via Clkgen0, derived from - * CPU clock; all other clock generators off/unused. - */ - div = (get_au1x00_speed() + 25000000) / 50000000; - if (div & 1) - div++; - div = ((div >> 1) - 1) & 0xff; - - freq0 = div << SYS_FC_FRDIV0_BIT; - __raw_writel(freq0, (void __iomem *)SYS_FREQCTRL0); - wmb(); - freq0 |= SYS_FC_FE0; /* enable F0 */ - __raw_writel(freq0, (void __iomem *)SYS_FREQCTRL0); - wmb(); - - /* psc0_intclk comes 1:1 from F0 */ - clksrc = SYS_CS_MUX_FQ0 << SYS_CS_ME0_BIT; - __raw_writel(clksrc, (void __iomem *)SYS_CLKSRC); - wmb(); -} - -static int __init db1200_arch_init(void) -{ - /* GPIO7 is low-level triggered CPLD cascade */ - irq_set_irq_type(AU1200_GPIO7_INT, IRQF_TRIGGER_LOW); - bcsr_init_irq(DB1200_INT_BEGIN, DB1200_INT_END, AU1200_GPIO7_INT); - - /* insert/eject pairs: one of both is always screaming. To avoid - * issues they must not be automatically enabled when initially - * requested. - */ - irq_set_status_flags(DB1200_SD0_INSERT_INT, IRQ_NOAUTOEN); - irq_set_status_flags(DB1200_SD0_EJECT_INT, IRQ_NOAUTOEN); - irq_set_status_flags(DB1200_PC0_INSERT_INT, IRQ_NOAUTOEN); - irq_set_status_flags(DB1200_PC0_EJECT_INT, IRQ_NOAUTOEN); - irq_set_status_flags(DB1200_PC1_INSERT_INT, IRQ_NOAUTOEN); - irq_set_status_flags(DB1200_PC1_EJECT_INT, IRQ_NOAUTOEN); - return 0; -} -arch_initcall(db1200_arch_init); diff --git a/arch/mips/alchemy/devboards/db1x00/platform.c b/arch/mips/alchemy/devboards/db1x00.c index 67b36e8a4c9..589ae2435cb 100644 --- a/arch/mips/alchemy/devboards/db1x00/platform.c +++ b/arch/mips/alchemy/devboards/db1x00.c @@ -1,7 +1,8 @@ /* - * DBAu1xxx board platform device registration + * DBAu1000/1500/1100 board support * - * Copyright (C) 2009 Manuel Lauss + * Copyright 2000, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -18,20 +19,61 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +#include <linux/dma-mapping.h> +#include <linux/gpio.h> #include <linux/init.h> #include <linux/interrupt.h> -#include <linux/dma-mapping.h> #include <linux/platform_device.h> - +#include <linux/pm.h> #include <asm/mach-au1x00/au1000.h> #include <asm/mach-au1x00/au1000_dma.h> #include <asm/mach-db1x00/bcsr.h> -#include "../platform.h" +#include <asm/reboot.h> +#include <prom.h> +#include "platform.h" struct pci_dev; +const char *get_system_type(void) +{ + return "Alchemy Db1x00"; +} + +void __init board_setup(void) +{ +#ifdef CONFIG_MIPS_DB1000 + printk(KERN_INFO "AMD Alchemy Au1000/Db1000 Board\n"); +#endif +#ifdef CONFIG_MIPS_DB1500 + printk(KERN_INFO "AMD Alchemy Au1500/Db1500 Board\n"); +#endif +#ifdef CONFIG_MIPS_DB1100 + printk(KERN_INFO "AMD Alchemy Au1100/Db1100 Board\n"); +#endif + /* initialize board register space */ + bcsr_init(DB1000_BCSR_PHYS_ADDR, + DB1000_BCSR_PHYS_ADDR + DB1000_BCSR_HEXLED_OFS); + +#if defined(CONFIG_IRDA) && defined(CONFIG_AU1000_FIR) + { + u32 pin_func; + + /* Set IRFIRSEL instead of GPIO15 */ + pin_func = au_readl(SYS_PINFUNC) | SYS_PF_IRF; + au_writel(pin_func, SYS_PINFUNC); + /* Power off until the driver is in use */ + bcsr_mod(BCSR_RESETS, BCSR_RESETS_IRDA_MODE_MASK, + BCSR_RESETS_IRDA_MODE_OFF); + } +#endif + bcsr_write(BCSR_PCMCIA, 0); /* turn off PCMCIA power */ + + /* Enable GPIO[31:0] inputs */ + alchemy_gpio1_input_enable(); +} + /* DB1xxx PCMCIA interrupt sources: - * CD0/1 GPIO0/3 + * CD0/1 GPIO0/3 * STSCHG0/1 GPIO1/4 * CARD0/1 GPIO2/5 */ @@ -174,6 +216,13 @@ static struct platform_device db1x00_audio_dev = { static int __init db1xxx_dev_init(void) { + irq_set_irq_type(DB1XXX_PCMCIA_CD0, IRQ_TYPE_EDGE_BOTH); + irq_set_irq_type(DB1XXX_PCMCIA_CD1, IRQ_TYPE_EDGE_BOTH); + irq_set_irq_type(DB1XXX_PCMCIA_CARD0, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(DB1XXX_PCMCIA_CARD1, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(DB1XXX_PCMCIA_STSCHG0, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(DB1XXX_PCMCIA_STSCHG1, IRQ_TYPE_LEVEL_LOW); + db1x_register_pcmcia_socket( AU1000_PCMCIA_ATTR_PHYS_ADDR, AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1, @@ -201,7 +250,7 @@ static int __init db1xxx_dev_init(void) platform_device_register(&alchemy_ac97c_dev); platform_device_register(&db1x00_audio_dev); - db1x_register_norflash(0x02000000, 4 /* 32bit */, F_SWAPPED); + db1x_register_norflash(32 << 20, 4 /* 32bit */, F_SWAPPED); return 0; } device_initcall(db1xxx_dev_init); diff --git a/arch/mips/alchemy/devboards/db1x00/Makefile b/arch/mips/alchemy/devboards/db1x00/Makefile deleted file mode 100644 index 613c0c0c8be..00000000000 --- a/arch/mips/alchemy/devboards/db1x00/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Copyright 2000, 2008 MontaVista Software Inc. -# Author: MontaVista Software, Inc. <source@mvista.com> -# -# Makefile for the Alchemy Semiconductor DBAu1xx0 boards. -# - -obj-y := board_setup.o platform.o diff --git a/arch/mips/alchemy/devboards/db1x00/board_setup.c b/arch/mips/alchemy/devboards/db1x00/board_setup.c deleted file mode 100644 index 2dbebcba020..00000000000 --- a/arch/mips/alchemy/devboards/db1x00/board_setup.c +++ /dev/null @@ -1,108 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * Alchemy Db1x00 board setup. - * - * Copyright 2000, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. <source@mvista.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/pm.h> - -#include <asm/mach-au1x00/au1000.h> -#include <asm/mach-au1x00/au1xxx_eth.h> -#include <asm/mach-db1x00/db1x00.h> -#include <asm/mach-db1x00/bcsr.h> -#include <asm/reboot.h> - -#include <prom.h> - -const char *get_system_type(void) -{ - return "Alchemy Db1x00"; -} - - -void __init board_setup(void) -{ -#ifdef CONFIG_MIPS_DB1000 - printk(KERN_INFO "AMD Alchemy Au1000/Db1000 Board\n"); -#endif -#ifdef CONFIG_MIPS_DB1500 - printk(KERN_INFO "AMD Alchemy Au1500/Db1500 Board\n"); -#endif -#ifdef CONFIG_MIPS_DB1100 - printk(KERN_INFO "AMD Alchemy Au1100/Db1100 Board\n"); -#endif - /* initialize board register space */ - bcsr_init(DB1000_BCSR_PHYS_ADDR, - DB1000_BCSR_PHYS_ADDR + DB1000_BCSR_HEXLED_OFS); - -#if defined(CONFIG_IRDA) && defined(CONFIG_AU1000_FIR) - { - u32 pin_func; - - /* Set IRFIRSEL instead of GPIO15 */ - pin_func = au_readl(SYS_PINFUNC) | SYS_PF_IRF; - au_writel(pin_func, SYS_PINFUNC); - /* Power off until the driver is in use */ - bcsr_mod(BCSR_RESETS, BCSR_RESETS_IRDA_MODE_MASK, - BCSR_RESETS_IRDA_MODE_OFF); - } -#endif - bcsr_write(BCSR_PCMCIA, 0); /* turn off PCMCIA power */ - - /* Enable GPIO[31:0] inputs */ - alchemy_gpio1_input_enable(); -} - -static int __init db1x00_init_irq(void) -{ -#if defined(CONFIG_MIPS_DB1500) - irq_set_irq_type(AU1500_GPIO0_INT, IRQF_TRIGGER_LOW); /* CD0# */ - irq_set_irq_type(AU1500_GPIO3_INT, IRQF_TRIGGER_LOW); /* CD1# */ - irq_set_irq_type(AU1500_GPIO2_INT, IRQF_TRIGGER_LOW); /* CARD0# */ - irq_set_irq_type(AU1500_GPIO5_INT, IRQF_TRIGGER_LOW); /* CARD1# */ - irq_set_irq_type(AU1500_GPIO1_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */ - irq_set_irq_type(AU1500_GPIO4_INT, IRQF_TRIGGER_LOW); /* STSCHG1# */ -#elif defined(CONFIG_MIPS_DB1100) - irq_set_irq_type(AU1100_GPIO0_INT, IRQF_TRIGGER_LOW); /* CD0# */ - irq_set_irq_type(AU1100_GPIO3_INT, IRQF_TRIGGER_LOW); /* CD1# */ - irq_set_irq_type(AU1100_GPIO2_INT, IRQF_TRIGGER_LOW); /* CARD0# */ - irq_set_irq_type(AU1100_GPIO5_INT, IRQF_TRIGGER_LOW); /* CARD1# */ - irq_set_irq_type(AU1100_GPIO1_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */ - irq_set_irq_type(AU1100_GPIO4_INT, IRQF_TRIGGER_LOW); /* STSCHG1# */ -#elif defined(CONFIG_MIPS_DB1000) - irq_set_irq_type(AU1000_GPIO0_INT, IRQF_TRIGGER_LOW); /* CD0# */ - irq_set_irq_type(AU1000_GPIO3_INT, IRQF_TRIGGER_LOW); /* CD1# */ - irq_set_irq_type(AU1000_GPIO2_INT, IRQF_TRIGGER_LOW); /* CARD0# */ - irq_set_irq_type(AU1000_GPIO5_INT, IRQF_TRIGGER_LOW); /* CARD1# */ - irq_set_irq_type(AU1000_GPIO1_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */ - irq_set_irq_type(AU1000_GPIO4_INT, IRQF_TRIGGER_LOW); /* STSCHG1# */ -#endif - return 0; -} -arch_initcall(db1x00_init_irq); diff --git a/arch/mips/alchemy/devboards/pb1100/board_setup.c b/arch/mips/alchemy/devboards/pb1100.c index d108fd573aa..cff50d05ddd 100644 --- a/arch/mips/alchemy/devboards/pb1100/board_setup.c +++ b/arch/mips/alchemy/devboards/pb1100.c @@ -1,42 +1,37 @@ /* - * Copyright 2002, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. <source@mvista.com> + * Pb1100 board platform device registration * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. + * Copyright (C) 2009 Manuel Lauss * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +#include <linux/delay.h> #include <linux/gpio.h> #include <linux/init.h> -#include <linux/delay.h> #include <linux/interrupt.h> - +#include <linux/dma-mapping.h> +#include <linux/platform_device.h> #include <asm/mach-au1x00/au1000.h> #include <asm/mach-db1x00/bcsr.h> - #include <prom.h> - +#include "platform.h" const char *get_system_type(void) { - return "Alchemy Pb1100"; + return "PB1100"; } void __init board_setup(void) @@ -115,13 +110,58 @@ void __init board_setup(void) } } -static int __init pb1100_init_irq(void) +/******************************************************************************/ + +static struct resource au1100_lcd_resources[] = { + [0] = { + .start = AU1100_LCD_PHYS_ADDR, + .end = AU1100_LCD_PHYS_ADDR + 0x800 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1100_LCD_INT, + .end = AU1100_LCD_INT, + .flags = IORESOURCE_IRQ, + } +}; + +static u64 au1100_lcd_dmamask = DMA_BIT_MASK(32); + +static struct platform_device au1100_lcd_device = { + .name = "au1100-lcd", + .id = 0, + .dev = { + .dma_mask = &au1100_lcd_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .num_resources = ARRAY_SIZE(au1100_lcd_resources), + .resource = au1100_lcd_resources, +}; + +static int __init pb1100_dev_init(void) { + int swapped; + irq_set_irq_type(AU1100_GPIO9_INT, IRQF_TRIGGER_LOW); /* PCCD# */ irq_set_irq_type(AU1100_GPIO10_INT, IRQF_TRIGGER_LOW); /* PCSTSCHG# */ irq_set_irq_type(AU1100_GPIO11_INT, IRQF_TRIGGER_LOW); /* PCCard# */ irq_set_irq_type(AU1100_GPIO13_INT, IRQF_TRIGGER_LOW); /* DC_IRQ# */ + /* PCMCIA. single socket, identical to Pb1500 */ + db1x_register_pcmcia_socket( + AU1000_PCMCIA_ATTR_PHYS_ADDR, + AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1, + AU1000_PCMCIA_MEM_PHYS_ADDR, + AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1, + AU1000_PCMCIA_IO_PHYS_ADDR, + AU1000_PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1, + AU1100_GPIO11_INT, AU1100_GPIO9_INT, /* card / insert */ + /*AU1100_GPIO10_INT*/0, 0, 0); /* stschg / eject / id */ + + swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1000_SWAPBOOT; + db1x_register_norflash(64 * 1024 * 1024, 4, swapped); + platform_device_register(&au1100_lcd_device); + return 0; } -arch_initcall(pb1100_init_irq); +device_initcall(pb1100_dev_init); diff --git a/arch/mips/alchemy/devboards/pb1100/Makefile b/arch/mips/alchemy/devboards/pb1100/Makefile deleted file mode 100644 index 7e3756c83fe..00000000000 --- a/arch/mips/alchemy/devboards/pb1100/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Copyright 2000, 2001, 2008 MontaVista Software Inc. -# Author: MontaVista Software, Inc. <source@mvista.com> -# -# Makefile for the Alchemy Semiconductor Pb1100 board. -# - -obj-y := board_setup.o platform.o diff --git a/arch/mips/alchemy/devboards/pb1100/platform.c b/arch/mips/alchemy/devboards/pb1100/platform.c deleted file mode 100644 index 9c57c01a68c..00000000000 --- a/arch/mips/alchemy/devboards/pb1100/platform.c +++ /dev/null @@ -1,77 +0,0 @@ -/* - * Pb1100 board platform device registration - * - * Copyright (C) 2009 Manuel Lauss - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <linux/init.h> -#include <linux/dma-mapping.h> -#include <linux/platform_device.h> - -#include <asm/mach-au1x00/au1000.h> -#include <asm/mach-db1x00/bcsr.h> - -#include "../platform.h" - -static struct resource au1100_lcd_resources[] = { - [0] = { - .start = AU1100_LCD_PHYS_ADDR, - .end = AU1100_LCD_PHYS_ADDR + 0x800 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AU1100_LCD_INT, - .end = AU1100_LCD_INT, - .flags = IORESOURCE_IRQ, - } -}; - -static u64 au1100_lcd_dmamask = DMA_BIT_MASK(32); - -static struct platform_device au1100_lcd_device = { - .name = "au1100-lcd", - .id = 0, - .dev = { - .dma_mask = &au1100_lcd_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .num_resources = ARRAY_SIZE(au1100_lcd_resources), - .resource = au1100_lcd_resources, -}; - -static int __init pb1100_dev_init(void) -{ - int swapped; - - /* PCMCIA. single socket, identical to Pb1500 */ - db1x_register_pcmcia_socket( - AU1000_PCMCIA_ATTR_PHYS_ADDR, - AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1, - AU1000_PCMCIA_MEM_PHYS_ADDR, - AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1, - AU1000_PCMCIA_IO_PHYS_ADDR, - AU1000_PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1, - AU1100_GPIO11_INT, AU1100_GPIO9_INT, /* card / insert */ - /*AU1100_GPIO10_INT*/0, 0, 0); /* stschg / eject / id */ - - swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1000_SWAPBOOT; - db1x_register_norflash(64 * 1024 * 1024, 4, swapped); - platform_device_register(&au1100_lcd_device); - - return 0; -} -device_initcall(pb1100_dev_init); diff --git a/arch/mips/alchemy/devboards/pb1200/platform.c b/arch/mips/alchemy/devboards/pb1200.c index 54f7f7b0676..a1b64977b47 100644 --- a/arch/mips/alchemy/devboards/pb1200/platform.c +++ b/arch/mips/alchemy/devboards/pb1200.c @@ -20,17 +20,97 @@ #include <linux/dma-mapping.h> #include <linux/init.h> +#include <linux/interrupt.h> #include <linux/leds.h> #include <linux/platform_device.h> #include <linux/smc91x.h> - #include <asm/mach-au1x00/au1000.h> #include <asm/mach-au1x00/au1100_mmc.h> #include <asm/mach-au1x00/au1xxx_dbdma.h> #include <asm/mach-db1x00/bcsr.h> #include <asm/mach-pb1x00/pb1200.h> +#include <prom.h> +#include "platform.h" + + +const char *get_system_type(void) +{ + return "PB1200"; +} + +void __init board_setup(void) +{ + printk(KERN_INFO "AMD Alchemy Pb1200 Board\n"); + bcsr_init(PB1200_BCSR_PHYS_ADDR, + PB1200_BCSR_PHYS_ADDR + PB1200_BCSR_HEXLED_OFS); + +#if 0 + { + u32 pin_func; + + /* + * Enable PSC1 SYNC for AC97. Normaly done in audio driver, + * but it is board specific code, so put it here. + */ + pin_func = au_readl(SYS_PINFUNC); + au_sync(); + pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1; + au_writel(pin_func, SYS_PINFUNC); + + au_writel(0, (u32)bcsr | 0x10); /* turn off PCMCIA power */ + au_sync(); + } +#endif + +#if defined(CONFIG_I2C_AU1550) + { + u32 freq0, clksrc; + u32 pin_func; + + /* Select SMBus in CPLD */ + bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC0MUX, 0); + + pin_func = au_readl(SYS_PINFUNC); + au_sync(); + pin_func &= ~(SYS_PINFUNC_P0A | SYS_PINFUNC_P0B); + /* Set GPIOs correctly */ + pin_func |= 2 << 17; + au_writel(pin_func, SYS_PINFUNC); + au_sync(); + + /* The I2C driver depends on 50 MHz clock */ + freq0 = au_readl(SYS_FREQCTRL0); + au_sync(); + freq0 &= ~(SYS_FC_FRDIV1_MASK | SYS_FC_FS1 | SYS_FC_FE1); + freq0 |= 3 << SYS_FC_FRDIV1_BIT; + /* 396 MHz / (3 + 1) * 2 == 49.5 MHz */ + au_writel(freq0, SYS_FREQCTRL0); + au_sync(); + freq0 |= SYS_FC_FE1; + au_writel(freq0, SYS_FREQCTRL0); + au_sync(); + + clksrc = au_readl(SYS_CLKSRC); + au_sync(); + clksrc &= ~(SYS_CS_CE0 | SYS_CS_DE0 | SYS_CS_ME0_MASK); + /* Bit 22 is EXTCLK0 for PSC0 */ + clksrc |= SYS_CS_MUX_FQ1 << SYS_CS_ME0_BIT; + au_writel(clksrc, SYS_CLKSRC); + au_sync(); + } +#endif + + /* + * The Pb1200 development board uses external MUX for PSC0 to + * support SMB/SPI. bcsr_resets bit 12: 0=SMB 1=SPI + */ +#ifdef CONFIG_I2C_AU1550 + bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC0MUX, 0); +#endif + au_sync(); +} -#include "../platform.h" +/******************************************************************************/ static int mmc_activity; @@ -183,7 +263,7 @@ static struct platform_device pb1200_mmc1_dev = { static struct resource ide_resources[] = { [0] = { .start = IDE_PHYS_ADDR, - .end = IDE_PHYS_ADDR + IDE_PHYS_LEN - 1, + .end = IDE_PHYS_ADDR + IDE_PHYS_LEN - 1, .flags = IORESOURCE_MEM }, [1] = { @@ -198,13 +278,13 @@ static struct resource ide_resources[] = { }, }; -static u64 ide_dmamask = DMA_BIT_MASK(32); +static u64 au1200_ide_dmamask = DMA_BIT_MASK(32); static struct platform_device ide_device = { .name = "au1200-ide", .id = 0, .dev = { - .dma_mask = &ide_dmamask, + .dma_mask = &au1200_ide_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), }, .num_resources = ARRAY_SIZE(ide_resources), @@ -310,6 +390,29 @@ static int __init board_register_devices(void) { int swapped; + /* We have a problem with CPLD rev 3. */ + if (BCSR_WHOAMI_CPLD(bcsr_read(BCSR_WHOAMI)) <= 3) { + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "Pb1200 must be at CPLD rev 4. Please have Pb1200\n"); + printk(KERN_ERR "updated to latest revision. This software will\n"); + printk(KERN_ERR "not work on anything less than CPLD rev 4.\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + panic("Game over. Your score is 0."); + } + + irq_set_irq_type(AU1200_GPIO7_INT, IRQF_TRIGGER_LOW); + bcsr_init_irq(PB1200_INT_BEGIN, PB1200_INT_END, AU1200_GPIO7_INT); + db1x_register_pcmcia_socket( AU1000_PCMCIA_ATTR_PHYS_ADDR, AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1, @@ -337,3 +440,25 @@ static int __init board_register_devices(void) ARRAY_SIZE(board_platform_devices)); } device_initcall(board_register_devices); + + +int board_au1200fb_panel(void) +{ + return (bcsr_read(BCSR_SWITCHES) >> 8) & 0x0f; +} + +int board_au1200fb_panel_init(void) +{ + /* Apply power */ + bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | + BCSR_BOARD_LCDBL); + return 0; +} + +int board_au1200fb_panel_shutdown(void) +{ + /* Remove power */ + bcsr_mod(BCSR_BOARD, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | + BCSR_BOARD_LCDBL, 0); + return 0; +} diff --git a/arch/mips/alchemy/devboards/pb1200/Makefile b/arch/mips/alchemy/devboards/pb1200/Makefile deleted file mode 100644 index 18c1bd53e4c..00000000000 --- a/arch/mips/alchemy/devboards/pb1200/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# -# Makefile for the Alchemy Semiconductor Pb1200/DBAu1200 boards. -# - -obj-y := board_setup.o platform.o diff --git a/arch/mips/alchemy/devboards/pb1200/board_setup.c b/arch/mips/alchemy/devboards/pb1200/board_setup.c deleted file mode 100644 index 6d06b07c238..00000000000 --- a/arch/mips/alchemy/devboards/pb1200/board_setup.c +++ /dev/null @@ -1,174 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * Alchemy Pb1200/Db1200 board setup. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/sched.h> - -#include <asm/mach-au1x00/au1000.h> -#include <asm/mach-db1x00/bcsr.h> - -#ifdef CONFIG_MIPS_PB1200 -#include <asm/mach-pb1x00/pb1200.h> -#endif - -#ifdef CONFIG_MIPS_DB1200 -#include <asm/mach-db1x00/db1200.h> -#define PB1200_INT_BEGIN DB1200_INT_BEGIN -#define PB1200_INT_END DB1200_INT_END -#endif - -#include <prom.h> - -const char *get_system_type(void) -{ - return "Alchemy Pb1200"; -} - -void __init board_setup(void) -{ - printk(KERN_INFO "AMD Alchemy Pb1200 Board\n"); - bcsr_init(PB1200_BCSR_PHYS_ADDR, - PB1200_BCSR_PHYS_ADDR + PB1200_BCSR_HEXLED_OFS); - -#if 0 - { - u32 pin_func; - - /* - * Enable PSC1 SYNC for AC97. Normaly done in audio driver, - * but it is board specific code, so put it here. - */ - pin_func = au_readl(SYS_PINFUNC); - au_sync(); - pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1; - au_writel(pin_func, SYS_PINFUNC); - - au_writel(0, (u32)bcsr | 0x10); /* turn off PCMCIA power */ - au_sync(); - } -#endif - -#if defined(CONFIG_I2C_AU1550) - { - u32 freq0, clksrc; - u32 pin_func; - - /* Select SMBus in CPLD */ - bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC0MUX, 0); - - pin_func = au_readl(SYS_PINFUNC); - au_sync(); - pin_func &= ~(SYS_PINFUNC_P0A | SYS_PINFUNC_P0B); - /* Set GPIOs correctly */ - pin_func |= 2 << 17; - au_writel(pin_func, SYS_PINFUNC); - au_sync(); - - /* The I2C driver depends on 50 MHz clock */ - freq0 = au_readl(SYS_FREQCTRL0); - au_sync(); - freq0 &= ~(SYS_FC_FRDIV1_MASK | SYS_FC_FS1 | SYS_FC_FE1); - freq0 |= 3 << SYS_FC_FRDIV1_BIT; - /* 396 MHz / (3 + 1) * 2 == 49.5 MHz */ - au_writel(freq0, SYS_FREQCTRL0); - au_sync(); - freq0 |= SYS_FC_FE1; - au_writel(freq0, SYS_FREQCTRL0); - au_sync(); - - clksrc = au_readl(SYS_CLKSRC); - au_sync(); - clksrc &= ~(SYS_CS_CE0 | SYS_CS_DE0 | SYS_CS_ME0_MASK); - /* Bit 22 is EXTCLK0 for PSC0 */ - clksrc |= SYS_CS_MUX_FQ1 << SYS_CS_ME0_BIT; - au_writel(clksrc, SYS_CLKSRC); - au_sync(); - } -#endif - - /* - * The Pb1200 development board uses external MUX for PSC0 to - * support SMB/SPI. bcsr_resets bit 12: 0=SMB 1=SPI - */ -#ifdef CONFIG_I2C_AU1550 - bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC0MUX, 0); -#endif - au_sync(); -} - -static int __init pb1200_init_irq(void) -{ - /* We have a problem with CPLD rev 3. */ - if (BCSR_WHOAMI_CPLD(bcsr_read(BCSR_WHOAMI)) <= 3) { - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "Pb1200 must be at CPLD rev 4. Please have Pb1200\n"); - printk(KERN_ERR "updated to latest revision. This software will\n"); - printk(KERN_ERR "not work on anything less than CPLD rev 4.\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - panic("Game over. Your score is 0."); - } - - irq_set_irq_type(AU1200_GPIO7_INT, IRQF_TRIGGER_LOW); - bcsr_init_irq(PB1200_INT_BEGIN, PB1200_INT_END, AU1200_GPIO7_INT); - - return 0; -} -arch_initcall(pb1200_init_irq); - - -int board_au1200fb_panel(void) -{ - return (bcsr_read(BCSR_SWITCHES) >> 8) & 0x0f; -} - -int board_au1200fb_panel_init(void) -{ - /* Apply power */ - bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | - BCSR_BOARD_LCDBL); - /* printk(KERN_DEBUG "board_au1200fb_panel_init()\n"); */ - return 0; -} - -int board_au1200fb_panel_shutdown(void) -{ - /* Remove power */ - bcsr_mod(BCSR_BOARD, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | - BCSR_BOARD_LCDBL, 0); - /* printk(KERN_DEBUG "board_au1200fb_panel_shutdown()\n"); */ - return 0; -} diff --git a/arch/mips/alchemy/devboards/pb1500/board_setup.c b/arch/mips/alchemy/devboards/pb1500.c index 37c1883b5ea..e7b807b3ec5 100644 --- a/arch/mips/alchemy/devboards/pb1500/board_setup.c +++ b/arch/mips/alchemy/devboards/pb1500.c @@ -1,41 +1,37 @@ /* - * Copyright 2000, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. <source@mvista.com> + * Pb1500 board support. * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. + * Copyright (C) 2009 Manuel Lauss * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ #include <linux/delay.h> +#include <linux/dma-mapping.h> #include <linux/gpio.h> #include <linux/init.h> #include <linux/interrupt.h> - +#include <linux/platform_device.h> #include <asm/mach-au1x00/au1000.h> #include <asm/mach-db1x00/bcsr.h> - #include <prom.h> +#include "platform.h" const char *get_system_type(void) { - return "Alchemy Pb1500"; + return "PB1500"; } void __init board_setup(void) @@ -123,17 +119,80 @@ void __init board_setup(void) } } -static int __init pb1500_init_irq(void) +/******************************************************************************/ + +static int pb1500_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin) { - irq_set_irq_type(AU1500_GPIO9_INT, IRQF_TRIGGER_LOW); /* CD0# */ - irq_set_irq_type(AU1500_GPIO10_INT, IRQF_TRIGGER_LOW); /* CARD0 */ - irq_set_irq_type(AU1500_GPIO11_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */ + if ((slot < 12) || (slot > 13) || pin == 0) + return -1; + if (slot == 12) + return (pin == 1) ? AU1500_PCI_INTA : 0xff; + if (slot == 13) { + switch (pin) { + case 1: return AU1500_PCI_INTA; + case 2: return AU1500_PCI_INTB; + case 3: return AU1500_PCI_INTC; + case 4: return AU1500_PCI_INTD; + } + } + return -1; +} + +static struct resource alchemy_pci_host_res[] = { + [0] = { + .start = AU1500_PCI_PHYS_ADDR, + .end = AU1500_PCI_PHYS_ADDR + 0xfff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct alchemy_pci_platdata pb1500_pci_pd = { + .board_map_irq = pb1500_map_pci_irq, + .pci_cfg_set = PCI_CONFIG_AEN | PCI_CONFIG_R2H | PCI_CONFIG_R1H | + PCI_CONFIG_CH | +#if defined(__MIPSEB__) + PCI_CONFIG_SIC_HWA_DAT | PCI_CONFIG_SM, +#else + 0, +#endif +}; + +static struct platform_device pb1500_pci_host = { + .dev.platform_data = &pb1500_pci_pd, + .name = "alchemy-pci", + .id = 0, + .num_resources = ARRAY_SIZE(alchemy_pci_host_res), + .resource = alchemy_pci_host_res, +}; + +static int __init pb1500_dev_init(void) +{ + int swapped; + + irq_set_irq_type(AU1500_GPIO9_INT, IRQF_TRIGGER_LOW); /* CD0# */ + irq_set_irq_type(AU1500_GPIO10_INT, IRQF_TRIGGER_LOW); /* CARD0 */ + irq_set_irq_type(AU1500_GPIO11_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */ irq_set_irq_type(AU1500_GPIO204_INT, IRQF_TRIGGER_HIGH); irq_set_irq_type(AU1500_GPIO201_INT, IRQF_TRIGGER_LOW); irq_set_irq_type(AU1500_GPIO202_INT, IRQF_TRIGGER_LOW); irq_set_irq_type(AU1500_GPIO203_INT, IRQF_TRIGGER_LOW); irq_set_irq_type(AU1500_GPIO205_INT, IRQF_TRIGGER_LOW); + /* PCMCIA. single socket, identical to Pb1100 */ + db1x_register_pcmcia_socket( + AU1000_PCMCIA_ATTR_PHYS_ADDR, + AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1, + AU1000_PCMCIA_MEM_PHYS_ADDR, + AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1, + AU1000_PCMCIA_IO_PHYS_ADDR, + AU1000_PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1, + AU1500_GPIO11_INT, AU1500_GPIO9_INT, /* card / insert */ + /*AU1500_GPIO10_INT*/0, 0, 0); /* stschg / eject / id */ + + swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1000_SWAPBOOT; + db1x_register_norflash(64 * 1024 * 1024, 4, swapped); + platform_device_register(&pb1500_pci_host); + return 0; } -arch_initcall(pb1500_init_irq); +arch_initcall(pb1500_dev_init); diff --git a/arch/mips/alchemy/devboards/pb1500/Makefile b/arch/mips/alchemy/devboards/pb1500/Makefile deleted file mode 100644 index e83b151b5b6..00000000000 --- a/arch/mips/alchemy/devboards/pb1500/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Copyright 2000, 2001, 2008 MontaVista Software Inc. -# Author: MontaVista Software, Inc. <source@mvista.com> -# -# Makefile for the Alchemy Semiconductor Pb1500 board. -# - -obj-y := board_setup.o platform.o diff --git a/arch/mips/alchemy/devboards/pb1500/platform.c b/arch/mips/alchemy/devboards/pb1500/platform.c deleted file mode 100644 index 1e52a01bac0..00000000000 --- a/arch/mips/alchemy/devboards/pb1500/platform.c +++ /dev/null @@ -1,94 +0,0 @@ -/* - * Pb1500 board platform device registration - * - * Copyright (C) 2009 Manuel Lauss - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <linux/dma-mapping.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <asm/mach-au1x00/au1000.h> -#include <asm/mach-db1x00/bcsr.h> - -#include "../platform.h" - -static int pb1500_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin) -{ - if ((slot < 12) || (slot > 13) || pin == 0) - return -1; - if (slot == 12) - return (pin == 1) ? AU1500_PCI_INTA : 0xff; - if (slot == 13) { - switch (pin) { - case 1: return AU1500_PCI_INTA; - case 2: return AU1500_PCI_INTB; - case 3: return AU1500_PCI_INTC; - case 4: return AU1500_PCI_INTD; - } - } - return -1; -} - -static struct resource alchemy_pci_host_res[] = { - [0] = { - .start = AU1500_PCI_PHYS_ADDR, - .end = AU1500_PCI_PHYS_ADDR + 0xfff, - .flags = IORESOURCE_MEM, - }, -}; - -static struct alchemy_pci_platdata pb1500_pci_pd = { - .board_map_irq = pb1500_map_pci_irq, - .pci_cfg_set = PCI_CONFIG_AEN | PCI_CONFIG_R2H | PCI_CONFIG_R1H | - PCI_CONFIG_CH | -#if defined(__MIPSEB__) - PCI_CONFIG_SIC_HWA_DAT | PCI_CONFIG_SM, -#else - 0, -#endif -}; - -static struct platform_device pb1500_pci_host = { - .dev.platform_data = &pb1500_pci_pd, - .name = "alchemy-pci", - .id = 0, - .num_resources = ARRAY_SIZE(alchemy_pci_host_res), - .resource = alchemy_pci_host_res, -}; - -static int __init pb1500_dev_init(void) -{ - int swapped; - - /* PCMCIA. single socket, identical to Pb1100 */ - db1x_register_pcmcia_socket( - AU1000_PCMCIA_ATTR_PHYS_ADDR, - AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1, - AU1000_PCMCIA_MEM_PHYS_ADDR, - AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1, - AU1000_PCMCIA_IO_PHYS_ADDR, - AU1000_PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1, - AU1500_GPIO11_INT, AU1500_GPIO9_INT, /* card / insert */ - /*AU1500_GPIO10_INT*/0, 0, 0); /* stschg / eject / id */ - - swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1000_SWAPBOOT; - db1x_register_norflash(64 * 1024 * 1024, 4, swapped); - platform_device_register(&pb1500_pci_host); - - return 0; -} -arch_initcall(pb1500_dev_init); diff --git a/arch/mips/alchemy/devboards/pb1550/platform.c b/arch/mips/alchemy/devboards/pb1550.c index a4604b8a349..e4a00a56a20 100644 --- a/arch/mips/alchemy/devboards/pb1550/platform.c +++ b/arch/mips/alchemy/devboards/pb1550.c @@ -1,7 +1,7 @@ /* - * Pb1550 board platform device registration + * Pb1550 board support. * - * Copyright (C) 2009 Manuel Lauss + * Copyright (C) 2009-2011 Manuel Lauss * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -20,13 +20,43 @@ #include <linux/dma-mapping.h> #include <linux/init.h> +#include <linux/interrupt.h> #include <linux/platform_device.h> #include <asm/mach-au1x00/au1000.h> #include <asm/mach-au1x00/au1xxx_dbdma.h> -#include <asm/mach-pb1x00/pb1550.h> +#include <asm/mach-au1x00/gpio.h> #include <asm/mach-db1x00/bcsr.h> +#include "platform.h" -#include "../platform.h" +const char *get_system_type(void) +{ + return "PB1550"; +} + +void __init board_setup(void) +{ + u32 pin_func; + + bcsr_init(PB1550_BCSR_PHYS_ADDR, + PB1550_BCSR_PHYS_ADDR + PB1550_BCSR_HEXLED_OFS); + + alchemy_gpio2_enable(); + + /* + * Enable PSC1 SYNC for AC'97. Normaly done in audio driver, + * but it is board specific code, so put it here. + */ + pin_func = au_readl(SYS_PINFUNC); + au_sync(); + pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1; + au_writel(pin_func, SYS_PINFUNC); + + bcsr_write(BCSR_PCMCIA, 0); /* turn off PCMCIA power */ + + printk(KERN_INFO "AMD Alchemy Pb1550 Board\n"); +} + +/******************************************************************************/ static int pb1550_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin) { @@ -105,6 +135,14 @@ static int __init pb1550_dev_init(void) { int swapped; + irq_set_irq_type(AU1550_GPIO0_INT, IRQF_TRIGGER_LOW); + irq_set_irq_type(AU1550_GPIO1_INT, IRQF_TRIGGER_LOW); + irq_set_irq_type(AU1550_GPIO201_205_INT, IRQF_TRIGGER_HIGH); + + /* enable both PCMCIA card irqs in the shared line */ + alchemy_gpio2_enable_int(201); + alchemy_gpio2_enable_int(202); + /* Pb1550, like all others, also has statuschange irqs; however they're * wired up on one of the Au1550's shared GPIO201_205 line, which also * services the PCMCIA card interrupts. So we ignore statuschange and diff --git a/arch/mips/alchemy/devboards/pb1550/Makefile b/arch/mips/alchemy/devboards/pb1550/Makefile deleted file mode 100644 index 9661b6ec5dd..00000000000 --- a/arch/mips/alchemy/devboards/pb1550/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Copyright 2000, 2008 MontaVista Software Inc. -# Author: MontaVista Software, Inc. <source@mvista.com> -# -# Makefile for the Alchemy Semiconductor Pb1550 board. -# - -obj-y := board_setup.o platform.o diff --git a/arch/mips/alchemy/devboards/pb1550/board_setup.c b/arch/mips/alchemy/devboards/pb1550/board_setup.c deleted file mode 100644 index 0f62d1e3df2..00000000000 --- a/arch/mips/alchemy/devboards/pb1550/board_setup.c +++ /dev/null @@ -1,80 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * Alchemy Pb1550 board setup. - * - * Copyright 2000, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. <source@mvista.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/init.h> -#include <linux/interrupt.h> - -#include <asm/mach-au1x00/au1000.h> -#include <asm/mach-pb1x00/pb1550.h> -#include <asm/mach-db1x00/bcsr.h> -#include <asm/mach-au1x00/gpio.h> - -#include <prom.h> - -const char *get_system_type(void) -{ - return "Alchemy Pb1550"; -} - -void __init board_setup(void) -{ - u32 pin_func; - - bcsr_init(PB1550_BCSR_PHYS_ADDR, - PB1550_BCSR_PHYS_ADDR + PB1550_BCSR_HEXLED_OFS); - - alchemy_gpio2_enable(); - - /* - * Enable PSC1 SYNC for AC'97. Normaly done in audio driver, - * but it is board specific code, so put it here. - */ - pin_func = au_readl(SYS_PINFUNC); - au_sync(); - pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1; - au_writel(pin_func, SYS_PINFUNC); - - bcsr_write(BCSR_PCMCIA, 0); /* turn off PCMCIA power */ - - printk(KERN_INFO "AMD Alchemy Pb1550 Board\n"); -} - -static int __init pb1550_init_irq(void) -{ - irq_set_irq_type(AU1550_GPIO0_INT, IRQF_TRIGGER_LOW); - irq_set_irq_type(AU1550_GPIO1_INT, IRQF_TRIGGER_LOW); - irq_set_irq_type(AU1550_GPIO201_205_INT, IRQF_TRIGGER_HIGH); - - /* enable both PCMCIA card irqs in the shared line */ - alchemy_gpio2_enable_int(201); - alchemy_gpio2_enable_int(202); - - return 0; -} -arch_initcall(pb1550_init_irq); |