MIPS: Alchemy: Basic support for the DB1300 board.

Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2867/
Patchwork: https://patchwork.linux-mips.org/patch/2919/
Patchwork: https://patchwork.linux-mips.org/patch/2928/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

5 files changed, 807 insertions, 0 deletions

diff --git a/arch/mips/alchemy/Kconfig b/arch/mips/alchemy/Kconfig
index 766badaef3b..f9a13beada4 100644
--- a/arch/mips/alchemy/Kconfig
+++ b/arch/mips/alchemy/Kconfig
@@ -49,6 +49,14 @@ config MIPS_DB1200
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_HAS_EARLY_PRINTK
 
+config MIPS_DB1300
+	bool "NetLogic DB1300 board"
+	select ALCHEMY_GPIOINT_AU1300
+	select DMA_COHERENT
+	select MIPS_DISABLE_OBSOLETE_IDE
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_HAS_EARLY_PRINTK
+
 config MIPS_DB1500
 	bool "Alchemy DB1500 board"
 	select ALCHEMY_GPIOINT_AU1000
diff --git a/arch/mips/alchemy/Platform b/arch/mips/alchemy/Platform
index 2920af9c256..4d13e21eaf8 100644
--- a/arch/mips/alchemy/Platform
+++ b/arch/mips/alchemy/Platform
@@ -68,6 +68,13 @@ cflags-$(CONFIG_MIPS_DB1200)	+= -I$(srctree)/arch/mips/include/asm/mach-db1x00
 load-$(CONFIG_MIPS_DB1200)	+= 0xffffffff80100000
 
 #
+# NetLogic DBAu1300 development platform
+#
+platform-$(CONFIG_MIPS_DB1300)	+= alchemy/devboards/
+cflags-$(CONFIG_MIPS_DB1300)	+= -I$(srctree)/arch/mips/include/asm/mach-db1x00
+load-$(CONFIG_MIPS_DB1300)	+= 0xffffffff80100000
+
+#
 # 4G-Systems eval board
 #
 platform-$(CONFIG_MIPS_MTX1)	+= alchemy/mtx-1/
diff --git a/arch/mips/alchemy/devboards/Makefile b/arch/mips/alchemy/devboards/Makefile
index 5afaf944868..2eb75c92a58 100644
--- a/arch/mips/alchemy/devboards/Makefile
+++ b/arch/mips/alchemy/devboards/Makefile
@@ -11,5 +11,6 @@ obj-$(CONFIG_MIPS_PB1550)	+= pb1550/
 obj-$(CONFIG_MIPS_DB1000)	+= db1x00/
 obj-$(CONFIG_MIPS_DB1100)	+= db1x00/
 obj-$(CONFIG_MIPS_DB1200)	+= db1200/
+obj-$(CONFIG_MIPS_DB1300)	+= db1300.o
 obj-$(CONFIG_MIPS_DB1500)	+= db1x00/
 obj-$(CONFIG_MIPS_DB1550)	+= db1x00/
diff --git a/arch/mips/alchemy/devboards/db1300.c b/arch/mips/alchemy/devboards/db1300.c
new file mode 100644
index 00000000000..c41788c5927
--- /dev/null
+++ b/arch/mips/alchemy/devboards/db1300.c
@@ -0,0 +1,787 @@
+/*
+ * DBAu1300 init and platform device setup.
+ *
+ * (c) 2009 Manuel Lauss <manuel.lauss@googlemail.com>
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/init.h>
+#include <linux/input.h>	/* KEY_* codes */
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/leds.h>
+#include <linux/ata_platform.h>
+#include <linux/mmc/host.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/platform_device.h>
+#include <linux/smsc911x.h>
+
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/au1100_mmc.h>
+#include <asm/mach-au1x00/au1xxx_dbdma.h>
+#include <asm/mach-au1x00/au1xxx_psc.h>
+#include <asm/mach-db1x00/db1300.h>
+#include <asm/mach-db1x00/bcsr.h>
+#include <asm/mach-au1x00/prom.h>
+
+#include "platform.h"
+
+static struct i2c_board_info db1300_i2c_devs[] __initdata = {
+	{ I2C_BOARD_INFO("wm8731", 0x1b), },	/* I2S audio codec */
+	{ I2C_BOARD_INFO("ne1619", 0x2d), },	/* adm1025-compat hwmon */
+};
+
+/* multifunction pins to assign to GPIO controller */
+static int db1300_gpio_pins[] __initdata = {
+	AU1300_PIN_LCDPWM0, AU1300_PIN_PSC2SYNC1, AU1300_PIN_WAKE1,
+	AU1300_PIN_WAKE2, AU1300_PIN_WAKE3, AU1300_PIN_FG3AUX,
+	AU1300_PIN_EXTCLK1,
+	-1,	/* terminator */
+};
+
+/* multifunction pins to assign to device functions */
+static int db1300_dev_pins[] __initdata = {
+	/* wake-from-str pins 0-3 */
+	AU1300_PIN_WAKE0,
+	/* external clock sources for PSC0 */
+	AU1300_PIN_EXTCLK0,
+	/* 8bit MMC interface on SD0: 6-9 */
+	AU1300_PIN_SD0DAT4, AU1300_PIN_SD0DAT5, AU1300_PIN_SD0DAT6,
+	AU1300_PIN_SD0DAT7,
+	/* UART1 pins: 11-18 */
+	AU1300_PIN_U1RI, AU1300_PIN_U1DCD, AU1300_PIN_U1DSR,
+	AU1300_PIN_U1CTS, AU1300_PIN_U1RTS, AU1300_PIN_U1DTR,
+	AU1300_PIN_U1RX, AU1300_PIN_U1TX,
+	/* UART0 pins: 19-24 */
+	AU1300_PIN_U0RI, AU1300_PIN_U0DCD, AU1300_PIN_U0DSR,
+	AU1300_PIN_U0CTS, AU1300_PIN_U0RTS, AU1300_PIN_U0DTR,
+	/* UART2: 25-26 */
+	AU1300_PIN_U2RX, AU1300_PIN_U2TX,
+	/* UART3: 27-28 */
+	AU1300_PIN_U3RX, AU1300_PIN_U3TX,
+	/* LCD controller PWMs, ext pixclock: 30-31 */
+	AU1300_PIN_LCDPWM1, AU1300_PIN_LCDCLKIN,
+	/* SD1 interface: 32-37 */
+	AU1300_PIN_SD1DAT0, AU1300_PIN_SD1DAT1, AU1300_PIN_SD1DAT2,
+	AU1300_PIN_SD1DAT3, AU1300_PIN_SD1CMD, AU1300_PIN_SD1CLK,
+	/* SD2 interface: 38-43 */
+	AU1300_PIN_SD2DAT0, AU1300_PIN_SD2DAT1, AU1300_PIN_SD2DAT2,
+	AU1300_PIN_SD2DAT3, AU1300_PIN_SD2CMD, AU1300_PIN_SD2CLK,
+	/* PSC0/1 clocks: 44-45 */
+	AU1300_PIN_PSC0CLK, AU1300_PIN_PSC1CLK,
+	/* PSCs: 46-49/50-53/54-57/58-61 */
+	AU1300_PIN_PSC0SYNC0, AU1300_PIN_PSC0SYNC1, AU1300_PIN_PSC0D0,
+	AU1300_PIN_PSC0D1,
+	AU1300_PIN_PSC1SYNC0, AU1300_PIN_PSC1SYNC1, AU1300_PIN_PSC1D0,
+	AU1300_PIN_PSC1D1,
+	AU1300_PIN_PSC2SYNC0,                       AU1300_PIN_PSC2D0,
+	AU1300_PIN_PSC2D1,
+	AU1300_PIN_PSC3SYNC0, AU1300_PIN_PSC3SYNC1, AU1300_PIN_PSC3D0,
+	AU1300_PIN_PSC3D1,
+	/* PCMCIA interface: 62-70 */
+	AU1300_PIN_PCE2, AU1300_PIN_PCE1, AU1300_PIN_PIOS16,
+	AU1300_PIN_PIOR, AU1300_PIN_PWE, AU1300_PIN_PWAIT,
+	AU1300_PIN_PREG, AU1300_PIN_POE, AU1300_PIN_PIOW,
+	/* camera interface H/V sync inputs: 71-72 */
+	AU1300_PIN_CIMLS, AU1300_PIN_CIMFS,
+	/* PSC2/3 clocks: 73-74 */
+	AU1300_PIN_PSC2CLK, AU1300_PIN_PSC3CLK,
+	-1,	/* terminator */
+};
+
+static void __init db1300_gpio_config(void)
+{
+	int *i;
+
+	i = &db1300_dev_pins[0];
+	while (*i != -1)
+		au1300_pinfunc_to_dev(*i++);
+
+	i = &db1300_gpio_pins[0];
+	while (*i != -1)
+		au1300_gpio_direction_input(*i++);/* implies pin_to_gpio */
+
+	au1300_set_dbdma_gpio(1, AU1300_PIN_FG3AUX);
+}
+
+char *get_system_type(void)
+{
+	return "DB1300";
+}
+
+/**********************************************************************/
+
+static void au1300_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
+				 unsigned int ctrl)
+{
+	struct nand_chip *this = mtd->priv;
+	unsigned long ioaddr = (unsigned long)this->IO_ADDR_W;
+
+	ioaddr &= 0xffffff00;
+
+	if (ctrl & NAND_CLE) {
+		ioaddr += MEM_STNAND_CMD;
+	} else if (ctrl & NAND_ALE) {
+		ioaddr += MEM_STNAND_ADDR;
+	} else {
+		/* assume we want to r/w real data  by default */
+		ioaddr += MEM_STNAND_DATA;
+	}
+	this->IO_ADDR_R = this->IO_ADDR_W = (void __iomem *)ioaddr;
+	if (cmd != NAND_CMD_NONE) {
+		__raw_writeb(cmd, this->IO_ADDR_W);
+		wmb();
+	}
+}
+
+static int au1300_nand_device_ready(struct mtd_info *mtd)
+{
+	return __raw_readl((void __iomem *)MEM_STSTAT) & 1;
+}
+
+static const char *db1300_part_probes[] = { "cmdlinepart", NULL };
+
+static struct mtd_partition db1300_nand_parts[] = {
+	{
+		.name	= "NAND FS 0",
+		.offset	= 0,
+		.size	= 8 * 1024 * 1024,
+	},
+	{
+		.name	= "NAND FS 1",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= MTDPART_SIZ_FULL
+	},
+};
+
+struct platform_nand_data db1300_nand_platdata = {
+	.chip = {
+		.nr_chips	= 1,
+		.chip_offset	= 0,
+		.nr_partitions	= ARRAY_SIZE(db1300_nand_parts),
+		.partitions	= db1300_nand_parts,
+		.chip_delay	= 20,
+		.part_probe_types = db1300_part_probes,
+	},
+	.ctrl = {
+		.dev_ready	= au1300_nand_device_ready,
+		.cmd_ctrl	= au1300_nand_cmd_ctrl,
+	},
+};
+
+static struct resource db1300_nand_res[] = {
+	[0] = {
+		.start	= DB1300_NAND_PHYS_ADDR,
+		.end	= DB1300_NAND_PHYS_ADDR + 0xff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device db1300_nand_dev = {
+	.name		= "gen_nand",
+	.num_resources	= ARRAY_SIZE(db1300_nand_res),
+	.resource	= db1300_nand_res,
+	.id		= -1,
+	.dev		= {
+		.platform_data = &db1300_nand_platdata,
+	}
+};
+
+/**********************************************************************/
+
+static struct resource db1300_eth_res[] = {
+	[0] = {
+		.start		= DB1300_ETH_PHYS_ADDR,
+		.end		= DB1300_ETH_PHYS_END,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= DB1300_ETH_INT,
+		.end		= DB1300_ETH_INT,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct smsc911x_platform_config db1300_eth_config = {
+	.phy_interface		= PHY_INTERFACE_MODE_MII,
+	.irq_polarity		= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type		= SMSC911X_IRQ_TYPE_PUSH_PULL,
+	.flags			= SMSC911X_USE_32BIT,
+};
+
+static struct platform_device db1300_eth_dev = {
+	.name			= "smsc911x",
+	.id			= -1,
+	.num_resources		= ARRAY_SIZE(db1300_eth_res),
+	.resource		= db1300_eth_res,
+	.dev = {
+		.platform_data	= &db1300_eth_config,
+	},
+};
+
+/**********************************************************************/
+
+static struct resource au1300_psc1_res[] = {
+	[0] = {
+		.start	= AU1300_PSC1_PHYS_ADDR,
+		.end	= AU1300_PSC1_PHYS_ADDR + 0x0fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1300_PSC1_INT,
+		.end	= AU1300_PSC1_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= AU1300_DSCR_CMD0_PSC1_TX,
+		.end	= AU1300_DSCR_CMD0_PSC1_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start	= AU1300_DSCR_CMD0_PSC1_RX,
+		.end	= AU1300_DSCR_CMD0_PSC1_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device db1300_ac97_dev = {
+	.name		= "au1xpsc_ac97",
+	.id		= 1,	/* PSC ID. match with AC97 codec ID! */
+	.num_resources	= ARRAY_SIZE(au1300_psc1_res),
+	.resource	= au1300_psc1_res,
+};
+
+/**********************************************************************/
+
+static struct resource au1300_psc2_res[] = {
+	[0] = {
+		.start	= AU1300_PSC2_PHYS_ADDR,
+		.end	= AU1300_PSC2_PHYS_ADDR + 0x0fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1300_PSC2_INT,
+		.end	= AU1300_PSC2_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= AU1300_DSCR_CMD0_PSC2_TX,
+		.end	= AU1300_DSCR_CMD0_PSC2_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start	= AU1300_DSCR_CMD0_PSC2_RX,
+		.end	= AU1300_DSCR_CMD0_PSC2_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device db1300_i2s_dev = {
+	.name		= "au1xpsc_i2s",
+	.id		= 2,	/* PSC ID */
+	.num_resources	= ARRAY_SIZE(au1300_psc2_res),
+	.resource	= au1300_psc2_res,
+};
+
+/**********************************************************************/
+
+static struct resource au1300_psc3_res[] = {
+	[0] = {
+		.start	= AU1300_PSC3_PHYS_ADDR,
+		.end	= AU1300_PSC3_PHYS_ADDR + 0x0fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1300_PSC3_INT,
+		.end	= AU1300_PSC3_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= AU1300_DSCR_CMD0_PSC3_TX,
+		.end	= AU1300_DSCR_CMD0_PSC3_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start	= AU1300_DSCR_CMD0_PSC3_RX,
+		.end	= AU1300_DSCR_CMD0_PSC3_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device db1300_i2c_dev = {
+	.name		= "au1xpsc_smbus",
+	.id		= 0,	/* bus number */
+	.num_resources	= ARRAY_SIZE(au1300_psc3_res),
+	.resource	= au1300_psc3_res,
+};
+
+/**********************************************************************/
+
+/* proper key assignments when facing the LCD panel.  For key assignments
+ * according to the schematics swap up with down and left with right.
+ * I chose to use it to emulate the arrow keys of a keyboard.
+ */
+static struct gpio_keys_button db1300_5waysw_arrowkeys[] = {
+	{
+		.code			= KEY_DOWN,
+		.gpio			= AU1300_PIN_LCDPWM0,
+		.type			= EV_KEY,
+		.debounce_interval	= 1,
+		.active_low		= 1,
+		.desc			= "5waysw-down",
+	},
+	{
+		.code			= KEY_UP,
+		.gpio			= AU1300_PIN_PSC2SYNC1,
+		.type			= EV_KEY,
+		.debounce_interval	= 1,
+		.active_low		= 1,
+		.desc			= "5waysw-up",
+	},
+	{
+		.code			= KEY_RIGHT,
+		.gpio			= AU1300_PIN_WAKE3,
+		.type			= EV_KEY,
+		.debounce_interval	= 1,
+		.active_low		= 1,
+		.desc			= "5waysw-right",
+	},
+	{
+		.code			= KEY_LEFT,
+		.gpio			= AU1300_PIN_WAKE2,
+		.type			= EV_KEY,
+		.debounce_interval	= 1,
+		.active_low		= 1,
+		.desc			= "5waysw-left",
+	},
+	{
+		.code			= KEY_ENTER,
+		.gpio			= AU1300_PIN_WAKE1,
+		.type			= EV_KEY,
+		.debounce_interval	= 1,
+		.active_low		= 1,
+		.desc			= "5waysw-push",
+	},
+};
+
+static struct gpio_keys_platform_data db1300_5waysw_data = {
+	.buttons	= db1300_5waysw_arrowkeys,
+	.nbuttons	= ARRAY_SIZE(db1300_5waysw_arrowkeys),
+	.rep		= 1,
+	.name		= "db1300-5wayswitch",
+};
+
+static struct platform_device db1300_5waysw_dev = {
+	.name		= "gpio-keys",
+	.dev	= {
+		.platform_data	= &db1300_5waysw_data,
+	},
+};
+
+/**********************************************************************/
+
+static struct platform_device db1300_rtc_dev = {
+	.name	= "rtc-au1xxx",
+	.id	= -1,
+};
+
+/**********************************************************************/
+
+static struct pata_platform_info db1300_ide_info = {
+	.ioport_shift	= DB1300_IDE_REG_SHIFT,
+};
+
+#define IDE_ALT_START	(14 << DB1300_IDE_REG_SHIFT)
+static struct resource db1300_ide_res[] = {
+	[0] = {
+		.start	= DB1300_IDE_PHYS_ADDR,
+		.end	= DB1300_IDE_PHYS_ADDR + IDE_ALT_START - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= DB1300_IDE_PHYS_ADDR + IDE_ALT_START,
+		.end	= DB1300_IDE_PHYS_ADDR + DB1300_IDE_PHYS_LEN - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
+		.start	= DB1300_IDE_INT,
+		.end	= DB1300_IDE_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device db1300_ide_dev = {
+	.dev	= {
+		.platform_data	= &db1300_ide_info,
+	},
+	.name		= "pata_platform",
+	.resource	= db1300_ide_res,
+	.num_resources	= ARRAY_SIZE(db1300_ide_res),
+};
+
+/**********************************************************************/
+
+static irqreturn_t db1300_mmc_cd(int irq, void *ptr)
+{
+	void(*mmc_cd)(struct mmc_host *, unsigned long);
+
+	/* disable the one currently screaming. No other way to shut it up */
+	if (irq == DB1300_SD1_INSERT_INT) {
+		disable_irq_nosync(DB1300_SD1_INSERT_INT);
+		enable_irq(DB1300_SD1_EJECT_INT);
+	} else {
+		disable_irq_nosync(DB1300_SD1_EJECT_INT);
+		enable_irq(DB1300_SD1_INSERT_INT);
+	}
+
+	/* link against CONFIG_MMC=m.  We can only be called once MMC core has
+	 * initialized the controller, so symbol_get() should always succeed.
+	 */
+	mmc_cd = symbol_get(mmc_detect_change);
+	mmc_cd(ptr, msecs_to_jiffies(500));
+	symbol_put(mmc_detect_change);
+
+	return IRQ_HANDLED;
+}
+
+static int db1300_mmc_card_readonly(void *mmc_host)
+{
+	/* it uses SD1 interface, but the DB1200's SD0 bit in the CPLD */
+	return bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD0WP;
+}
+
+static int db1300_mmc_card_inserted(void *mmc_host)
+{
+	return bcsr_read(BCSR_SIGSTAT) & (1 << 12); /* insertion irq signal */
+}
+
+static int db1300_mmc_cd_setup(void *mmc_host, int en)
+{
+	int ret;
+
+	if (en) {
+		ret = request_irq(DB1300_SD1_INSERT_INT, db1300_mmc_cd, 0,
+				  "sd_insert", mmc_host);
+		if (ret)
+			goto out;
+
+		ret = request_irq(DB1300_SD1_EJECT_INT, db1300_mmc_cd, 0,
+				  "sd_eject", mmc_host);
+		if (ret) {
+			free_irq(DB1300_SD1_INSERT_INT, mmc_host);
+			goto out;
+		}
+
+		if (db1300_mmc_card_inserted(mmc_host))
+			enable_irq(DB1300_SD1_EJECT_INT);
+		else
+			enable_irq(DB1300_SD1_INSERT_INT);
+
+	} else {
+		free_irq(DB1300_SD1_INSERT_INT, mmc_host);
+		free_irq(DB1300_SD1_EJECT_INT, mmc_host);
+	}
+	ret = 0;
+out:
+	return ret;
+}
+
+static void db1300_mmcled_set(struct led_classdev *led,
+			      enum led_brightness brightness)
+{
+	if (brightness != LED_OFF)
+		bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED0, 0);
+	else
+		bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED0);
+}
+
+static struct led_classdev db1300_mmc_led = {
+	.brightness_set	= db1300_mmcled_set,
+};
+
+struct au1xmmc_platform_data db1300_sd1_platdata = {
+	.cd_setup	= db1300_mmc_cd_setup,
+	.card_inserted	= db1300_mmc_card_inserted,
+	.card_readonly	= db1300_mmc_card_readonly,
+	.led		= &db1300_mmc_led,
+};
+
+static struct resource au1300_sd1_res[] = {
+	[0] = {
+		.start	= AU1300_SD1_PHYS_ADDR,
+		.end	= AU1300_SD1_PHYS_ADDR,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1300_SD1_INT,
+		.end	= AU1300_SD1_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= AU1300_DSCR_CMD0_SDMS_TX1,
+		.end	= AU1300_DSCR_CMD0_SDMS_TX1,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start	= AU1300_DSCR_CMD0_SDMS_RX1,
+		.end	= AU1300_DSCR_CMD0_SDMS_RX1,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device db1300_sd1_dev = {
+	.dev = {
+		.platform_data	= &db1300_sd1_platdata,
+	},
+	.name		= "au1xxx-mmc",
+	.id		= 1,
+	.resource	= au1300_sd1_res,
+	.num_resources	= ARRAY_SIZE(au1300_sd1_res),
+};
+
+/**********************************************************************/
+
+static int db1300_movinand_inserted(void *mmc_host)
+{
+	return 0; /* disable for now, it doesn't work yet */
+}
+
+static int db1300_movinand_readonly(void *mmc_host)
+{
+	return 0;
+}
+
+static void db1300_movinand_led_set(struct led_classdev *led,
+				    enum led_brightness brightness)
+{
+	if (brightness != LED_OFF)
+		bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED1, 0);
+	else
+		bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED1);
+}
+
+static struct led_classdev db1300_movinand_led = {
+	.brightness_set		= db1300_movinand_led_set,
+};
+
+struct au1xmmc_platform_data db1300_sd0_platdata = {
+	.card_inserted		= db1300_movinand_inserted,
+	.card_readonly		= db1300_movinand_readonly,
+	.led			= &db1300_movinand_led,
+	.mask_host_caps		= MMC_CAP_NEEDS_POLL,
+};
+
+static struct resource au1300_sd0_res[] = {
+	[0] = {
+		.start	= AU1100_SD0_PHYS_ADDR,
+		.end	= AU1100_SD0_PHYS_ADDR,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1300_SD0_INT,
+		.end	= AU1300_SD0_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= AU1300_DSCR_CMD0_SDMS_TX0,
+		.end	= AU1300_DSCR_CMD0_SDMS_TX0,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start	= AU1300_DSCR_CMD0_SDMS_RX0,
+		.end	= AU1300_DSCR_CMD0_SDMS_RX0,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device db1300_sd0_dev = {
+	.dev = {
+		.platform_data	= &db1300_sd0_platdata,
+	},
+	.name		= "au1xxx-mmc",
+	.id		= 0,
+	.resource	= au1300_sd0_res,
+	.num_resources	= ARRAY_SIZE(au1300_sd0_res),
+};
+
+/**********************************************************************/
+
+static struct platform_device db1300_wm9715_dev = {
+	.name		= "wm9712-codec",
+	.id		= 1,	/* ID of PSC for AC97 audio, see asoc glue! */
+};
+
+static struct platform_device db1300_ac97dma_dev = {
+	.name		= "au1xpsc-pcm",
+	.id		= 1,	/* PSC ID */
+};
+
+static struct platform_device db1300_i2sdma_dev = {
+	.name		= "au1xpsc-pcm",
+	.id		= 2,	/* PSC ID */
+};
+
+static struct platform_device db1300_sndac97_dev = {
+	.name		= "db1300-ac97",
+};
+
+static struct platform_device db1300_sndi2s_dev = {
+	.name		= "db1300-i2s",
+};
+
+/**********************************************************************/
+
+static struct resource au1300_lcd_res[] = {
+	[0] = {
+		.start	= AU1200_LCD_PHYS_ADDR,
+		.end	= AU1200_LCD_PHYS_ADDR + 0x800 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1300_LCD_INT,
+		.end	= AU1300_LCD_INT,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static u64 au1300_lcd_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device db1300_lcd_dev = {
+	.name		= "au1200-lcd",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= &au1300_lcd_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.num_resources	= ARRAY_SIZE(au1300_lcd_res),
+	.resource	= au1300_lcd_res,
+};
+
+/**********************************************************************/
+
+static struct platform_device *db1300_dev[] __initdata = {
+	&db1300_eth_dev,
+	&db1300_i2c_dev,
+	&db1300_5waysw_dev,
+	&db1300_rtc_dev,
+	&db1300_nand_dev,
+	&db1300_ide_dev,
+	&db1300_sd0_dev,
+	&db1300_sd1_dev,
+	&db1300_lcd_dev,
+	&db1300_ac97_dev,
+	&db1300_i2s_dev,
+	&db1300_wm9715_dev,
+	&db1300_ac97dma_dev,
+	&db1300_i2sdma_dev,
+	&db1300_sndac97_dev,
+	&db1300_sndi2s_dev,
+};
+
+static int __init db1300_device_init(void)
+{
+	int swapped, cpldirq;
+
+	/* setup CPLD IRQ muxer */
+	cpldirq = au1300_gpio_to_irq(AU1300_PIN_EXTCLK1);
+	irq_set_irq_type(cpldirq, IRQ_TYPE_LEVEL_HIGH);
+	bcsr_init_irq(DB1300_FIRST_INT, DB1300_LAST_INT, cpldirq);
+
+	/* insert/eject IRQs: one always triggers so don't enable them
+	 * when doing request_irq() on them.  DB1200 has this bug too.
+	 */
+	irq_set_status_flags(DB1300_SD1_INSERT_INT, IRQ_NOAUTOEN);
+	irq_set_status_flags(DB1300_SD1_EJECT_INT, IRQ_NOAUTOEN);
+	irq_set_status_flags(DB1300_CF_INSERT_INT, IRQ_NOAUTOEN);
+	irq_set_status_flags(DB1300_CF_EJECT_INT, IRQ_NOAUTOEN);
+
+	/*
+	 * setup board
+	 */
+	prom_get_ethernet_addr(&db1300_eth_config.mac[0]);
+
+	i2c_register_board_info(0, db1300_i2c_devs,
+				ARRAY_SIZE(db1300_i2c_devs));
+
+	/* Audio PSC clock is supplied by codecs (PSC1, 2) */
+	__raw_writel(PSC_SEL_CLK_SERCLK,
+	    (void __iomem *)KSEG1ADDR(AU1300_PSC1_PHYS_ADDR) + PSC_SEL_OFFSET);
+	wmb();
+	__raw_writel(PSC_SEL_CLK_SERCLK,
+	    (void __iomem *)KSEG1ADDR(AU1300_PSC2_PHYS_ADDR) + PSC_SEL_OFFSET);
+	wmb();
+	/* I2C uses internal 48MHz EXTCLK1 */
+	__raw_writel(PSC_SEL_CLK_INTCLK,
+	    (void __iomem *)KSEG1ADDR(AU1300_PSC3_PHYS_ADDR) + PSC_SEL_OFFSET);
+	wmb();
+
+	/* enable power to USB ports */
+	bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_USBHPWR | BCSR_RESETS_OTGPWR);
+
+	/* although it is socket #0, it uses the CPLD bits which previous boards
+	 * have used for socket #1.
+	 */
+	db1x_register_pcmcia_socket(
+		AU1000_PCMCIA_ATTR_PHYS_ADDR,
+		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x00400000 - 1,
+		AU1000_PCMCIA_MEM_PHYS_ADDR,
+		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x00400000 - 1,
+		AU1000_PCMCIA_IO_PHYS_ADDR,
+		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x00010000 - 1,
+		DB1300_CF_INT, DB1300_CF_INSERT_INT, 0, DB1300_CF_EJECT_INT, 1);
+
+	swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1200_SWAPBOOT;
+	db1x_register_norflash(64 << 20, 2, swapped);
+
+	return platform_add_devices(db1300_dev, ARRAY_SIZE(db1300_dev));
+}
+device_initcall(db1300_device_init);
+
+
+void __init board_setup(void)
+{
+	unsigned short whoami;
+
+	db1300_gpio_config();
+	bcsr_init(DB1300_BCSR_PHYS_ADDR,
+		  DB1300_BCSR_PHYS_ADDR + DB1300_BCSR_HEXLED_OFS);
+
+	whoami = bcsr_read(BCSR_WHOAMI);
+	printk(KERN_INFO "NetLogic DBAu1300 Development Platform.\n\t"
+		"BoardID %d   CPLD Rev %d   DaughtercardID %d\n",
+		BCSR_WHOAMI_BOARD(whoami), BCSR_WHOAMI_CPLD(whoami),
+		BCSR_WHOAMI_DCID(whoami));
+
+	/* enable UARTs, YAMON only enables #2 */
+	alchemy_uart_enable(AU1300_UART0_PHYS_ADDR);
+	alchemy_uart_enable(AU1300_UART1_PHYS_ADDR);
+	alchemy_uart_enable(AU1300_UART3_PHYS_ADDR);
+}
+
+
+/* au1200fb calls these: STERBT EINEN TRAGISCHEN TOD!!! */
+int board_au1200fb_panel(void)
+{
+	return 9;	/* DB1300_800x480 */
+}
+
+int board_au1200fb_panel_init(void)
+{
+	/* Apply power (Vee/Vdd logic is inverted on Panel DB1300_800x480) */
+	bcsr_mod(BCSR_BOARD, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD,
+			     BCSR_BOARD_LCDBL);
+	return 0;
+}
+
+int board_au1200fb_panel_shutdown(void)
+{
+	/* Remove power (Vee/Vdd logic is inverted on Panel DB1300_800x480) */
+	bcsr_mod(BCSR_BOARD, BCSR_BOARD_LCDBL,
+			     BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD);
+	return 0;
+}
diff --git a/arch/mips/alchemy/devboards/prom.c b/arch/mips/alchemy/devboards/prom.c
index f734833fbdd..3a73f9663b0 100644
--- a/arch/mips/alchemy/devboards/prom.c
+++ b/arch/mips/alchemy/devboards/prom.c
@@ -61,5 +61,9 @@ void __init prom_init(void)
 
 void prom_putchar(unsigned char c)
 {
+#ifdef CONFIG_MIPS_DB1300
+	alchemy_uart_putchar(AU1300_UART2_PHYS_ADDR, c);
+#else
 	alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
+#endif
 }