Merge branch 'linus' into x86/memtest

4 files changed, 39 insertions, 38 deletions

diff --git a/arch/mips/au1000/pb1100/Makefile b/arch/mips/au1000/pb1100/Makefile
index 996236df637..793e97c49e4 100644
--- a/arch/mips/au1000/pb1100/Makefile
+++ b/arch/mips/au1000/pb1100/Makefile
@@ -1,8 +1,8 @@
 #
-#  Copyright 2000,2001 MontaVista Software Inc.
-#  Author: MontaVista Software, Inc.
-#     	ppopov@mvista.com or source@mvista.com
+#  Copyright 2000, 2001, 2008 MontaVista Software Inc.
+#  Author: MontaVista Software, Inc. <source@mvista.com>
 #
 # Makefile for the Alchemy Semiconductor Pb1100 board.
+#
 
 lib-y := init.o board_setup.o irqmap.o
diff --git a/arch/mips/au1000/pb1100/board_setup.c b/arch/mips/au1000/pb1100/board_setup.c
index 656164c8e9c..c0bfd59a7a3 100644
--- a/arch/mips/au1000/pb1100/board_setup.c
+++ b/arch/mips/au1000/pb1100/board_setup.c
@@ -1,7 +1,6 @@
 /*
- * Copyright 2002 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *         	ppopov@mvista.com or source@mvista.com
+ * Copyright 2002, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
  *
  *  This program is free software; you can redistribute  it and/or modify it
  *  under  the terms of  the GNU General  Public License as published by the
@@ -32,15 +31,15 @@
 
 void board_reset(void)
 {
-    /* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
-    au_writel(0x00000000, 0xAE00001C);
+	/* Hit BCSR.RST_VDDI[SOFT_RESET] */
+	au_writel(0x00000000, PB1100_RST_VDDI);
 }
 
 void __init board_setup(void)
 {
-	volatile void __iomem * base = (volatile void __iomem *) 0xac000000UL;
+	volatile void __iomem *base = (volatile void __iomem *)0xac000000UL;
 
-	// set AUX clock to 12MHz * 8 = 96 MHz
+	/* Set AUX clock to 12 MHz * 8 = 96 MHz */
 	au_writel(8, SYS_AUXPLL);
 	au_writel(0, SYS_PININPUTEN);
 	udelay(100);
@@ -49,44 +48,47 @@ void __init board_setup(void)
 	{
 		u32 pin_func, sys_freqctrl, sys_clksrc;
 
-		// configure pins GPIO[14:9] as GPIO
-		pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x80);
+		/* Configure pins GPIO[14:9] as GPIO */
+		pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_UR3;
 
-		/* zero and disable FREQ2 */
+		/* Zero and disable FREQ2 */
 		sys_freqctrl = au_readl(SYS_FREQCTRL0);
 		sys_freqctrl &= ~0xFFF00000;
 		au_writel(sys_freqctrl, SYS_FREQCTRL0);
 
-		/* zero and disable USBH/USBD/IrDA clock */
+		/* Zero and disable USBH/USBD/IrDA clock */
 		sys_clksrc = au_readl(SYS_CLKSRC);
-		sys_clksrc &= ~0x0000001F;
+		sys_clksrc &= ~(SYS_CS_CIR | SYS_CS_DIR | SYS_CS_MIR_MASK);
 		au_writel(sys_clksrc, SYS_CLKSRC);
 
 		sys_freqctrl = au_readl(SYS_FREQCTRL0);
 		sys_freqctrl &= ~0xFFF00000;
 
 		sys_clksrc = au_readl(SYS_CLKSRC);
-		sys_clksrc &= ~0x0000001F;
+		sys_clksrc &= ~(SYS_CS_CIR | SYS_CS_DIR | SYS_CS_MIR_MASK);
 
-		// FREQ2 = aux/2 = 48 MHz
-		sys_freqctrl |= ((0<<22) | (1<<21) | (1<<20));
+		/* FREQ2 = aux / 2 = 48 MHz */
+		sys_freqctrl |= (0 << SYS_FC_FRDIV2_BIT) |
+				SYS_FC_FE2 | SYS_FC_FS2;
 		au_writel(sys_freqctrl, SYS_FREQCTRL0);
 
 		/*
-		 * Route 48MHz FREQ2 into USBH/USBD/IrDA
+		 * Route 48 MHz FREQ2 into USBH/USBD/IrDA
 		 */
-		sys_clksrc |= ((4<<2) | (0<<1) | 0 );
+		sys_clksrc |= SYS_CS_MUX_FQ2 << SYS_CS_MIR_BIT;
 		au_writel(sys_clksrc, SYS_CLKSRC);
 
-		/* setup the static bus controller */
+		/* Setup the static bus controller */
 		au_writel(0x00000002, MEM_STCFG3);  /* type = PCMCIA */
 		au_writel(0x280E3D07, MEM_STTIME3); /* 250ns cycle time */
 		au_writel(0x10000000, MEM_STADDR3); /* any PCMCIA select */
 
-		// get USB Functionality pin state (device vs host drive pins)
-		pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x8000);
-		// 2nd USB port is USB host
-		pin_func |= 0x8000;
+		/*
+		 * Get USB Functionality pin state (device vs host drive pins).
+		 */
+		pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_USB;
+		/* 2nd USB port is USB host. */
+		pin_func |= SYS_PF_USB;
 		au_writel(pin_func, SYS_PINFUNC);
 	}
 #endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
@@ -94,12 +96,12 @@ void __init board_setup(void)
 	/* Enable sys bus clock divider when IDLE state or no bus activity. */
 	au_writel(au_readl(SYS_POWERCTRL) | (0x3 << 5), SYS_POWERCTRL);
 
-	// Enable the RTC if not already enabled
+	/* Enable the RTC if not already enabled. */
 	if (!(readb(base + 0x28) & 0x20)) {
 		writeb(readb(base + 0x28) | 0x20, base + 0x28);
 		au_sync();
 	}
-	// Put the clock in BCD mode
+	/* Put the clock in BCD mode. */
 	if (readb(base + 0x2C) & 0x4) { /* reg B */
 		writeb(readb(base + 0x2c) & ~0x4, base + 0x2c);
 		au_sync();
diff --git a/arch/mips/au1000/pb1100/init.c b/arch/mips/au1000/pb1100/init.c
index c91344648ed..8355483f3de 100644
--- a/arch/mips/au1000/pb1100/init.c
+++ b/arch/mips/au1000/pb1100/init.c
@@ -3,9 +3,8 @@
  * BRIEF MODULE DESCRIPTION
  *	Pb1100 board setup
  *
- * Copyright 2002 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *         	ppopov@mvista.com or source@mvista.com
+ * Copyright 2002, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
  *
  *  This program is free software; you can redistribute  it and/or modify it
  *  under  the terms of  the GNU General  Public License as published by the
@@ -46,8 +45,8 @@ void __init prom_init(void)
 	unsigned long memsize;
 
 	prom_argc = fw_arg0;
-	prom_argv = (char **) fw_arg1;
-	prom_envp = (char **) fw_arg3;
+	prom_argv = (char **)fw_arg1;
+	prom_envp = (char **)fw_arg3;
 
 	prom_init_cmdline();
 
@@ -55,7 +54,7 @@ void __init prom_init(void)
 	if (!memsize_str)
 		memsize = 0x04000000;
 	else
-		memsize = simple_strtol(memsize_str, NULL, 0);
+		memsize = strict_strtol(memsize_str, 0, NULL);
 
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/au1000/pb1100/irqmap.c b/arch/mips/au1000/pb1100/irqmap.c
index b5021e3d477..9b7dd8b4128 100644
--- a/arch/mips/au1000/pb1100/irqmap.c
+++ b/arch/mips/au1000/pb1100/irqmap.c
@@ -1,6 +1,6 @@
 /*
  * BRIEF MODULE DESCRIPTION
- *	Au1xxx irq map table
+ *	Au1xx0 IRQ map table
  *
  * Copyright 2003 Embedded Edge, LLC
  *		dan@embeddededge.com
@@ -31,10 +31,10 @@
 #include <asm/mach-au1x00/au1000.h>
 
 struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
-	{ AU1000_GPIO_9, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card Fully_Interted#
-	{ AU1000_GPIO_10, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card STSCHG#
-	{ AU1000_GPIO_11, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card IRQ#
-	{ AU1000_GPIO_13, INTC_INT_LOW_LEVEL, 0 }, // DC_IRQ#
+	{ AU1000_GPIO_9,  INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card Fully_Inserted# */
+	{ AU1000_GPIO_10, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card STSCHG# */
+	{ AU1000_GPIO_11, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card IRQ# */
+	{ AU1000_GPIO_13, INTC_INT_LOW_LEVEL, 0 }, /* DC_IRQ# */
 };
 
 int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);