Merge remote-tracking branch 'airlied/drm-fixes' into drm-intel-next-queued

Back-merge from drm-fixes into drm-intel-next to sort out two things:

- interlaced support: -fixes contains a bugfix to correctly clear
  interlaced configuration bits in case the bios sets up an interlaced
  mode and we want to set up the progressive mode (current kernels
  don't support interlaced). The actual feature work to support
  interlaced depends upon (and conflicts with) this bugfix.

- forcewake voodoo to workaround missed IRQ issues: -fixes only enabled
  this for ivybridge, but some recent bug reports indicate that we
  need this on Sandybridge, too. But in a slightly different flavour
  and with other fixes and reworks on top. Additionally there are some
  forcewake cleanup patches heading to -next that would conflict with
  currrent -fixes.

Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

1 files changed, 22 insertions, 27 deletions

diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c
index 40b223b603b..2f1773f3fb7 100644
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -709,15 +709,9 @@ void __init board_prom_init(void)
 	char cfe_version[32];
 	u32 val;
 
-	/* read base address of boot chip select (0)
-	 * 6345 does not have MPI but boots from standard
-	 * MIPS Flash address */
-	if (BCMCPU_IS_6345())
-		val = 0x1fc00000;
-	else {
-		val = bcm_mpi_readl(MPI_CSBASE_REG(0));
-		val &= MPI_CSBASE_BASE_MASK;
-	}
+	/* read base address of boot chip select (0) */
+	val = bcm_mpi_readl(MPI_CSBASE_REG(0));
+	val &= MPI_CSBASE_BASE_MASK;
 	boot_addr = (u8 *)KSEG1ADDR(val);
 
 	/* dump cfe version */
@@ -797,18 +791,6 @@ void __init board_prom_init(void)
 	}
 
 	bcm_gpio_writel(val, GPIO_MODE_REG);
-
-	/* Generate MAC address for WLAN and
-	 * register our SPROM */
-#ifdef CONFIG_SSB_PCIHOST
-	if (!board_get_mac_address(bcm63xx_sprom.il0mac)) {
-		memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
-		memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
-		if (ssb_arch_register_fallback_sprom(
-				&bcm63xx_get_fallback_sprom) < 0)
-			printk(KERN_ERR PFX "failed to register fallback SPROM\n");
-	}
-#endif
 }
 
 /*
@@ -834,10 +816,13 @@ static struct mtd_partition mtd_partitions[] = {
 	}
 };
 
+static const char *bcm63xx_part_types[] = { "bcm63xxpart", NULL };
+
 static struct physmap_flash_data flash_data = {
 	.width			= 2,
 	.nr_parts		= ARRAY_SIZE(mtd_partitions),
 	.parts			= mtd_partitions,
+	.part_probe_types	= bcm63xx_part_types,
 };
 
 static struct resource mtd_resources[] = {
@@ -892,13 +877,23 @@ int __init board_register_devices(void)
 	if (board.has_dsp)
 		bcm63xx_dsp_register(&board.dsp);
 
-	/* read base address of boot chip select (0) */
-	if (BCMCPU_IS_6345())
-		val = 0x1fc00000;
-	else {
-		val = bcm_mpi_readl(MPI_CSBASE_REG(0));
-		val &= MPI_CSBASE_BASE_MASK;
+	/* Generate MAC address for WLAN and register our SPROM,
+	 * do this after registering enet devices
+	 */
+#ifdef CONFIG_SSB_PCIHOST
+	if (!board_get_mac_address(bcm63xx_sprom.il0mac)) {
+		memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
+		memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
+		if (ssb_arch_register_fallback_sprom(
+				&bcm63xx_get_fallback_sprom) < 0)
+			pr_err(PFX "failed to register fallback SPROM\n");
 	}
+#endif
+
+	/* read base address of boot chip select (0) */
+	val = bcm_mpi_readl(MPI_CSBASE_REG(0));
+	val &= MPI_CSBASE_BASE_MASK;
+
 	mtd_resources[0].start = val;
 	mtd_resources[0].end = 0x1FFFFFFF;