Merge tag 'omap-devel-dt-merged-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Device tree related changes for omaps.

Note that this branch is based on omap-cleanup-sparseirq-for-v3.7
to avoid merge conflicts with the sparseirq changes for gpio-twl4030
driver.

* tag 'omap-devel-dt-merged-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  arm/dts: Mux uart pins for omap4-sdp
  ARM: OMAP2+: select PINCTRL in Kconfig
  arm/dts: Add pinctrl driver entries for omap2/3/4
  arm/dts: Add omap36xx.dtsi file and rename omap3-beagle to omap3-beagle-xm
  ARM: dts: omap3-overo: Add support for the blue LED
  Documentation: dt: Update the OMAP documentation with Overo/Toby
  ARM: dts: OMAP3: Add support for Gumstix Overo with Tobi expansion board
  ARM: dts: OMAP4: Add reg and interrupts for every nodes
  ARM: dts: AM33XX: Specify reg and interrupt property for all nodes
  ARM: dts: AM33XX: Convert all hex numbers to lower-case
  ARM: dts: omap3-beagle: Enable audio support
  ARM: dts: omap5: Add McPDM and DMIC section to the dtsi file
  ARM: dts: omap5: Add McBSP entries
  ARM: dts: omap4: Add reg-names for McPDM and DMIC
  ARM: dts: omap4: Add McBSP entries
  ARM: dts: omap3: Add McBSP entries
  ARM: dts: omap2420-h4: Include omap2420.dtsi file instead the common omap2
  ARM: dts: omap2: Add McBSP entries for OMAP2420 and OMAP2430 SoC
  ARM: dts: omap3-beagle: Add heartbeat and mmc LEDs support
  ARM: dts: omap3: Add gpio-twl4030 properties for BeagleBoard and omap3-EVM
  ...

1 files changed, 15 insertions, 15 deletions

diff --git a/arch/mips/cavium-octeon/serial.c b/arch/mips/cavium-octeon/serial.c
index 138b2216b4f..569f41bdcc4 100644
--- a/arch/mips/cavium-octeon/serial.c
+++ b/arch/mips/cavium-octeon/serial.c
@@ -47,40 +47,40 @@ static int __devinit octeon_serial_probe(struct platform_device *pdev)
 {
 	int irq, res;
 	struct resource *res_mem;
-	struct uart_port port;
+	struct uart_8250_port up;
 
 	/* All adaptors have an irq.  */
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0)
 		return irq;
 
-	memset(&port, 0, sizeof(port));
+	memset(&up, 0, sizeof(up));
 
-	port.flags = ASYNC_SKIP_TEST | UPF_SHARE_IRQ | UPF_FIXED_TYPE;
-	port.type = PORT_OCTEON;
-	port.iotype = UPIO_MEM;
-	port.regshift = 3;
-	port.dev = &pdev->dev;
+	up.port.flags = ASYNC_SKIP_TEST | UPF_SHARE_IRQ | UPF_FIXED_TYPE;
+	up.port.type = PORT_OCTEON;
+	up.port.iotype = UPIO_MEM;
+	up.port.regshift = 3;
+	up.port.dev = &pdev->dev;
 
 	if (octeon_is_simulation())
 		/* Make simulator output fast*/
-		port.uartclk = 115200 * 16;
+		up.port.uartclk = 115200 * 16;
 	else
-		port.uartclk = octeon_get_io_clock_rate();
+		up.port.uartclk = octeon_get_io_clock_rate();
 
-	port.serial_in = octeon_serial_in;
-	port.serial_out = octeon_serial_out;
-	port.irq = irq;
+	up.port.serial_in = octeon_serial_in;
+	up.port.serial_out = octeon_serial_out;
+	up.port.irq = irq;
 
 	res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (res_mem == NULL) {
 		dev_err(&pdev->dev, "found no memory resource\n");
 		return -ENXIO;
 	}
-	port.mapbase = res_mem->start;
-	port.membase = ioremap(res_mem->start, resource_size(res_mem));
+	up.port.mapbase = res_mem->start;
+	up.port.membase = ioremap(res_mem->start, resource_size(res_mem));
 
-	res = serial8250_register_port(&port);
+	res = serial8250_register_8250_port(&up);
 
 	return res >= 0 ? 0 : res;
 }