Merge master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6

Conflicts:

	drivers/usb/input/Makefile
	drivers/usb/input/gtco.c

8 files changed, 151 insertions, 117 deletions

diff --git a/arch/mips/cobalt/Kconfig b/arch/mips/cobalt/Kconfig
deleted file mode 100644
index 7c42b088d16..00000000000
--- a/arch/mips/cobalt/Kconfig
+++ /dev/null
@@ -1,7 +0,0 @@
-config EARLY_PRINTK
-	bool "Early console support"
-	depends on MIPS_COBALT
-	help
-	  Provide early console support by direct access to the
-	  on board UART. The UART must have been previously
-	  initialised by the boot loader.
diff --git a/arch/mips/cobalt/Makefile b/arch/mips/cobalt/Makefile
index c35ee25e557..9565b2104dc 100644
--- a/arch/mips/cobalt/Makefile
+++ b/arch/mips/cobalt/Makefile
@@ -4,6 +4,6 @@
 
 obj-y	 := irq.o reset.o setup.o buttons.o
 
+obj-$(CONFIG_PCI)		+= pci.o
 obj-$(CONFIG_EARLY_PRINTK)	+= console.o
-
-EXTRA_AFLAGS := $(CFLAGS)
+obj-$(CONFIG_MTD_PHYSMAP)	+= mtd.o
diff --git a/arch/mips/cobalt/console.c b/arch/mips/cobalt/console.c
index 46c23b66bc1..0485d51f721 100644
--- a/arch/mips/cobalt/console.c
+++ b/arch/mips/cobalt/console.c
@@ -1,47 +1,16 @@
 /*
  * (C) P. Horton 2006
  */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/console.h>
 #include <linux/serial_reg.h>
+
 #include <asm/addrspace.h>
-#include <asm/mach-cobalt/cobalt.h>
 
-static void putchar(int c)
-{
-	if(c == '\n')
-		putchar('\r');
+#include <cobalt.h>
 
+void prom_putchar(char c)
+{
 	while(!(COBALT_UART[UART_LSR] & UART_LSR_THRE))
 		;
 
 	COBALT_UART[UART_TX] = c;
 }
-
-static void cons_write(struct console *c, const char *s, unsigned n)
-{
-	while(n-- && *s)
-		putchar(*s++);
-}
-
-static struct console cons_info =
-{
-	.name	= "uart",
-	.write	= cons_write,
-	.flags	= CON_PRINTBUFFER | CON_BOOT,
-	.index	= -1,
-};
-
-void __init cobalt_early_console(void)
-{
-	register_console(&cons_info);
-
-	printk("Cobalt: early console registered\n");
-}
-
-void __init disable_early_printk(void)
-{
-	unregister_console(&cons_info);
-}
diff --git a/arch/mips/cobalt/irq.c b/arch/mips/cobalt/irq.c
index fe93b846923..950ad1e8be4 100644
--- a/arch/mips/cobalt/irq.c
+++ b/arch/mips/cobalt/irq.c
@@ -17,7 +17,7 @@
 #include <asm/irq_cpu.h>
 #include <asm/gt64120.h>
 
-#include <asm/mach-cobalt/cobalt.h>
+#include <cobalt.h>
 
 /*
  * We have two types of interrupts that we handle, ones that come in through
diff --git a/arch/mips/cobalt/mtd.c b/arch/mips/cobalt/mtd.c
new file mode 100644
index 00000000000..2b088ef3839
--- /dev/null
+++ b/arch/mips/cobalt/mtd.c
@@ -0,0 +1,61 @@
+/*
+ *  Registration of Cobalt MTD device.
+ *
+ *  Copyright (C) 2006  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+static struct mtd_partition cobalt_mtd_partitions[] = {
+	{
+		.name	= "firmware",
+		.offset	= 0x0,
+		.size	= 0x80000,
+	},
+};
+
+static struct physmap_flash_data cobalt_flash_data = {
+	.width		= 1,
+	.nr_parts	= 1,
+	.parts		= cobalt_mtd_partitions,
+};
+
+static struct resource cobalt_mtd_resource = {
+	.start	= 0x1fc00000,
+	.end	= 0x1fc7ffff,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device cobalt_mtd = {
+	.name		= "physmap-flash",
+	.dev		= {
+		.platform_data	= &cobalt_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &cobalt_mtd_resource,
+};
+
+static int __init cobalt_mtd_init(void)
+{
+	platform_device_register(&cobalt_mtd);
+
+	return 0;
+}
+
+module_init(cobalt_mtd_init);
diff --git a/arch/mips/cobalt/pci.c b/arch/mips/cobalt/pci.c
new file mode 100644
index 00000000000..d91027f43de
--- /dev/null
+++ b/arch/mips/cobalt/pci.c
@@ -0,0 +1,47 @@
+/*
+ * Register PCI controller.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 1997, 2004, 05 by Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 2001, 2002, 2003 by Liam Davies (ldavies@agile.tv)
+ *
+ */
+#include <linux/init.h>
+#include <linux/pci.h>
+
+#include <asm/gt64120.h>
+
+extern struct pci_ops gt64xxx_pci0_ops;
+
+static struct resource cobalt_mem_resource = {
+	.start	= GT_DEF_PCI0_MEM0_BASE,
+	.end	= GT_DEF_PCI0_MEM0_BASE + GT_DEF_PCI0_MEM0_SIZE - 1,
+	.name	= "PCI memory",
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct resource cobalt_io_resource = {
+	.start	= 0x1000,
+	.end	= GT_DEF_PCI0_IO_SIZE - 1,
+	.name	= "PCI I/O",
+	.flags	= IORESOURCE_IO,
+};
+
+static struct pci_controller cobalt_pci_controller = {
+	.pci_ops	= &gt64xxx_pci0_ops,
+	.mem_resource	= &cobalt_mem_resource,
+	.io_resource	= &cobalt_io_resource,
+	.io_offset	= 0 - GT_DEF_PCI0_IO_BASE,
+};
+
+static int __init cobalt_pci_init(void)
+{
+	register_pci_controller(&cobalt_pci_controller);
+
+	return 0;
+}
+
+arch_initcall(cobalt_pci_init);
diff --git a/arch/mips/cobalt/reset.c b/arch/mips/cobalt/reset.c
index 753dfccae6f..43cca21fdbc 100644
--- a/arch/mips/cobalt/reset.c
+++ b/arch/mips/cobalt/reset.c
@@ -8,15 +8,12 @@
  * Copyright (C) 1995, 1996, 1997 by Ralf Baechle
  * Copyright (C) 2001 by Liam Davies (ldavies@agile.tv)
  */
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <asm/cacheflush.h>
+#include <linux/jiffies.h>
+
 #include <asm/io.h>
-#include <asm/processor.h>
 #include <asm/reboot.h>
-#include <asm/system.h>
-#include <asm/mipsregs.h>
-#include <asm/mach-cobalt/cobalt.h>
+
+#include <cobalt.h>
 
 void cobalt_machine_halt(void)
 {
diff --git a/arch/mips/cobalt/setup.c b/arch/mips/cobalt/setup.c
index a4b69b543bd..d0dd81790f7 100644
--- a/arch/mips/cobalt/setup.c
+++ b/arch/mips/cobalt/setup.c
@@ -19,12 +19,10 @@
 #include <asm/bootinfo.h>
 #include <asm/time.h>
 #include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/processor.h>
 #include <asm/reboot.h>
 #include <asm/gt64120.h>
 
-#include <asm/mach-cobalt/cobalt.h>
+#include <cobalt.h>
 
 extern void cobalt_machine_restart(char *command);
 extern void cobalt_machine_halt(void);
@@ -63,61 +61,38 @@ void __init plat_timer_setup(struct irqaction *irq)
 	GT_WRITE(GT_INTRMASK_OFS, GT_INTR_T0EXP_MSK | GT_READ(GT_INTRMASK_OFS));
 }
 
-extern struct pci_ops gt64111_pci_ops;
-
-static struct resource cobalt_mem_resource = {
-	.start	= GT_DEF_PCI0_MEM0_BASE,
-	.end	= GT_DEF_PCI0_MEM0_BASE + GT_DEF_PCI0_MEM0_SIZE - 1,
-	.name	= "PCI memory",
-	.flags	= IORESOURCE_MEM
-};
-
-static struct resource cobalt_io_resource = {
-	.start	= 0x1000,
-	.end	= 0xffff,
-	.name	= "PCI I/O",
-	.flags	= IORESOURCE_IO
-};
-
-static struct resource cobalt_io_resources[] = {
-	{
+/*
+ * Cobalt doesn't have PS/2 keyboard/mouse interfaces,
+ * keyboard conntroller is never used.
+ * Also PCI-ISA bridge DMA contoroller is never used.
+ */
+static struct resource cobalt_reserved_resources[] = {
+	{	/* dma1 */
 		.start	= 0x00,
 		.end	= 0x1f,
-		.name	= "dma1",
-		.flags	= IORESOURCE_BUSY
-	}, {
-		.start	= 0x40,
-		.end	= 0x5f,
-		.name	= "timer",
-		.flags	= IORESOURCE_BUSY
-	}, {
+		.name	= "reserved",
+		.flags	= IORESOURCE_BUSY | IORESOURCE_IO,
+	},
+	{	/* keyboard */
 		.start	= 0x60,
 		.end	= 0x6f,
-		.name	= "keyboard",
-		.flags	= IORESOURCE_BUSY
-	}, {
+		.name	= "reserved",
+		.flags	= IORESOURCE_BUSY | IORESOURCE_IO,
+	},
+	{	/* dma page reg */
 		.start	= 0x80,
 		.end	= 0x8f,
-		.name	= "dma page reg",
-		.flags	= IORESOURCE_BUSY
-	}, {
+		.name	= "reserved",
+		.flags	= IORESOURCE_BUSY | IORESOURCE_IO,
+	},
+	{	/* dma2 */
 		.start	= 0xc0,
 		.end	= 0xdf,
-		.name	= "dma2",
-		.flags	= IORESOURCE_BUSY
+		.name	= "reserved",
+		.flags	= IORESOURCE_BUSY | IORESOURCE_IO,
 	},
 };
 
-#define COBALT_IO_RESOURCES (sizeof(cobalt_io_resources)/sizeof(struct resource))
-
-static struct pci_controller cobalt_pci_controller = {
-	.pci_ops	= &gt64111_pci_ops,
-	.mem_resource	= &cobalt_mem_resource,
-	.mem_offset	= 0,
-	.io_resource	= &cobalt_io_resource,
-	.io_offset	= 0 - GT_DEF_PCI0_IO_BASE,
-};
-
 void __init plat_mem_setup(void)
 {
 	static struct uart_port uart;
@@ -130,12 +105,12 @@ void __init plat_mem_setup(void)
 
 	set_io_port_base(CKSEG1ADDR(GT_DEF_PCI0_IO_BASE));
 
-	/* I/O port resource must include UART and LCD/buttons */
+	/* I/O port resource must include LCD/buttons */
 	ioport_resource.end = 0x0fffffff;
 
-	/* request I/O space for devices used on all i[345]86 PCs */
-	for (i = 0; i < COBALT_IO_RESOURCES; i++)
-		request_resource(&ioport_resource, cobalt_io_resources + i);
+	/* These resources have been reserved by VIA SuperI/O chip. */
+	for (i = 0; i < ARRAY_SIZE(cobalt_reserved_resources); i++)
+		request_resource(&ioport_resource, cobalt_reserved_resources + i);
 
         /* Read the cobalt id register out of the PCI config space */
         PCI_CFG_SET(devfn, (VIA_COBALT_BRD_ID_REG & ~0x3));
@@ -145,28 +120,20 @@ void __init plat_mem_setup(void)
 
 	printk("Cobalt board ID: %d\n", cobalt_board_id);
 
-#ifdef CONFIG_PCI
-	register_pci_controller(&cobalt_pci_controller);
-#endif
-
-#ifdef CONFIG_SERIAL_8250
 	if (cobalt_board_id > COBALT_BRD_ID_RAQ1) {
-
-#ifdef CONFIG_EARLY_PRINTK
-		cobalt_early_console();
-#endif
-
+#ifdef CONFIG_SERIAL_8250
 		uart.line	= 0;
 		uart.type	= PORT_UNKNOWN;
 		uart.uartclk	= 18432000;
 		uart.irq	= COBALT_SERIAL_IRQ;
-		uart.flags	= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
-		uart.iobase	= 0xc800000;
-		uart.iotype	= UPIO_PORT;
+		uart.flags	= UPF_IOREMAP | UPF_BOOT_AUTOCONF |
+				  UPF_SKIP_TEST;
+		uart.iotype	= UPIO_MEM;
+		uart.mapbase	= 0x1c800000;
 
 		early_serial_setup(&uart);
-	}
 #endif
+	}
 }
 
 /*