Merge branch 'master' into upstream

Conflicts:

	drivers/scsi/libata-core.c
	drivers/scsi/libata-scsi.c
	include/linux/pci_ids.h

1 files changed, 0 insertions, 136 deletions

diff --git a/arch/mips/ddb5xxx/ddb5476/dbg_io.c b/arch/mips/ddb5xxx/ddb5476/dbg_io.c
deleted file mode 100644
index f2296a99995..00000000000
--- a/arch/mips/ddb5xxx/ddb5476/dbg_io.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * kgdb io functions for DDB5476.  We use the second serial port.
- *
- * Copyright (C) 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-/* ======================= CONFIG ======================== */
-
-/* [jsun] we use the second serial port for kdb */
-#define         BASE                    0xa60002f8
-#define         MAX_BAUD                115200
-
-/* distance in bytes between two serial registers */
-#define         REG_OFFSET              1
-
-/*
- * 0 - kgdb does serial init
- * 1 - kgdb skip serial init
- */
-static int remoteDebugInitialized = 0;
-
-/*
- * the default baud rate *if* kgdb does serial init
- */
-#define		BAUD_DEFAULT		UART16550_BAUD_38400
-
-/* ======================= END OF CONFIG ======================== */
-
-typedef unsigned char uint8;
-typedef unsigned int uint32;
-
-#define         UART16550_BAUD_2400             2400
-#define         UART16550_BAUD_4800             4800
-#define         UART16550_BAUD_9600             9600
-#define         UART16550_BAUD_19200            19200
-#define         UART16550_BAUD_38400            38400
-#define         UART16550_BAUD_57600            57600
-#define         UART16550_BAUD_115200           115200
-
-#define         UART16550_PARITY_NONE           0
-#define         UART16550_PARITY_ODD            0x08
-#define         UART16550_PARITY_EVEN           0x18
-#define         UART16550_PARITY_MARK           0x28
-#define         UART16550_PARITY_SPACE          0x38
-
-#define         UART16550_DATA_5BIT             0x0
-#define         UART16550_DATA_6BIT             0x1
-#define         UART16550_DATA_7BIT             0x2
-#define         UART16550_DATA_8BIT             0x3
-
-#define         UART16550_STOP_1BIT             0x0
-#define         UART16550_STOP_2BIT             0x4
-
-/* register offset */
-#define         OFS_RCV_BUFFER          0
-#define         OFS_TRANS_HOLD          0
-#define         OFS_SEND_BUFFER         0
-#define         OFS_INTR_ENABLE         (1*REG_OFFSET)
-#define         OFS_INTR_ID             (2*REG_OFFSET)
-#define         OFS_DATA_FORMAT         (3*REG_OFFSET)
-#define         OFS_LINE_CONTROL        (3*REG_OFFSET)
-#define         OFS_MODEM_CONTROL       (4*REG_OFFSET)
-#define         OFS_RS232_OUTPUT        (4*REG_OFFSET)
-#define         OFS_LINE_STATUS         (5*REG_OFFSET)
-#define         OFS_MODEM_STATUS        (6*REG_OFFSET)
-#define         OFS_RS232_INPUT         (6*REG_OFFSET)
-#define         OFS_SCRATCH_PAD         (7*REG_OFFSET)
-
-#define         OFS_DIVISOR_LSB         (0*REG_OFFSET)
-#define         OFS_DIVISOR_MSB         (1*REG_OFFSET)
-
-
-/* memory-mapped read/write of the port */
-#define         UART16550_READ(y)    (*((volatile uint8*)(BASE + y)))
-#define         UART16550_WRITE(y, z)  ((*((volatile uint8*)(BASE + y))) = z)
-
-void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
-{
-        /* disable interrupts */
-        UART16550_WRITE(OFS_INTR_ENABLE, 0);
-
-        /* set up baud rate */
-        {
-                uint32 divisor;
-
-                /* set DIAB bit */
-                UART16550_WRITE(OFS_LINE_CONTROL, 0x80);
-
-                /* set divisor */
-                divisor = MAX_BAUD / baud;
-                UART16550_WRITE(OFS_DIVISOR_LSB, divisor & 0xff);
-                UART16550_WRITE(OFS_DIVISOR_MSB, (divisor & 0xff00) >> 8);
-
-                /* clear DIAB bit */
-                UART16550_WRITE(OFS_LINE_CONTROL, 0x0);
-        }
-
-        /* set data format */
-        UART16550_WRITE(OFS_DATA_FORMAT, data | parity | stop);
-}
-
-
-uint8 getDebugChar(void)
-{
-        if (!remoteDebugInitialized) {
-                remoteDebugInitialized = 1;
-                debugInit(BAUD_DEFAULT,
-                          UART16550_DATA_8BIT,
-                          UART16550_PARITY_NONE, UART16550_STOP_1BIT);
-        }
-
-        while ((UART16550_READ(OFS_LINE_STATUS) & 0x1) == 0);
-        return UART16550_READ(OFS_RCV_BUFFER);
-}
-
-
-int putDebugChar(uint8 byte)
-{
-        if (!remoteDebugInitialized) {
-                remoteDebugInitialized = 1;
-                debugInit(BAUD_DEFAULT,
-                          UART16550_DATA_8BIT,
-                          UART16550_PARITY_NONE, UART16550_STOP_1BIT);
-        }
-
-        while ((UART16550_READ(OFS_LINE_STATUS) & 0x20) == 0);
-        UART16550_WRITE(OFS_SEND_BUFFER, byte);
-        return 1;
-}