[MIPS] EV64120: Remove support

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

7 files changed, 0 insertions, 532 deletions

diff --git a/arch/mips/gt64120/ev64120/Kconfig b/arch/mips/gt64120/ev64120/Kconfig
deleted file mode 100644
index d691762cb0f..00000000000
--- a/arch/mips/gt64120/ev64120/Kconfig
+++ /dev/null
@@ -1,3 +0,0 @@
-config EVB_PCI1
-	bool "Enable Second PCI (PCI1)"
-	depends on MIPS_EV64120
diff --git a/arch/mips/gt64120/ev64120/Makefile b/arch/mips/gt64120/ev64120/Makefile
deleted file mode 100644
index 323b2cebc69..00000000000
--- a/arch/mips/gt64120/ev64120/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-#  Copyright 2000 RidgeRun, Inc.
-#  Author: RidgeRun, Inc.
-#     	glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com
-#
-# Makefile for the Galileo EV64120 board.
-#
-
-obj-y	+= irq.o promcon.o reset.o serialGT.o setup.o
diff --git a/arch/mips/gt64120/ev64120/irq.c b/arch/mips/gt64120/ev64120/irq.c
deleted file mode 100644
index 64e4c80b613..00000000000
--- a/arch/mips/gt64120/ev64120/irq.c
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- * Code to handle irqs on GT64120A boards
- *  Derived from mips/orion and Cort <cort@fsmlabs.com>
- *
- * Copyright (C) 2000 RidgeRun, Inc.
- * Author: RidgeRun, Inc.
- *   glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/kernel_stat.h>
-#include <linux/module.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/timex.h>
-#include <linux/slab.h>
-#include <linux/random.h>
-#include <linux/bitops.h>
-#include <asm/bootinfo.h>
-#include <asm/io.h>
-#include <asm/mipsregs.h>
-#include <asm/system.h>
-#include <asm/gt64120.h>
-
-asmlinkage void plat_irq_dispatch(void)
-{
-	unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
-
-	if (pending & STATUSF_IP4)		/* int2 hardware line (timer) */
-		do_IRQ(4);
-	else if (pending & STATUSF_IP2)		/* int0 hardware line */
-		do_IRQ(GT_INTA);
-	else if (pending & STATUSF_IP5)		/* int3 hardware line */
-		do_IRQ(GT_INTD);
-	else if (pending & STATUSF_IP6)		/* int4 hardware line */
-		do_IRQ(6);
-	else if (pending & STATUSF_IP7)		/* compare int */
-		do_IRQ(7);
-	else
-		spurious_interrupt();
-}
-
-static void disable_ev64120_irq(unsigned int irq_nr)
-{
-	if (irq_nr >= 8) {	// All PCI interrupts are on line 5 or 2
-		clear_c0_status(9 << 10);
-	} else {
-		clear_c0_status(1 << (irq_nr + 8));
-	}
-}
-
-static void enable_ev64120_irq(unsigned int irq_nr)
-{
-	if (irq_nr >= 8)	// All PCI interrupts are on line 5 or 2
-		set_c0_status(9 << 10);
-	else
-		set_c0_status(1 << (irq_nr + 8));
-}
-
-static void end_ev64120_irq(unsigned int irq)
-{
-	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
-		enable_ev64120_irq(irq);
-}
-
-static struct irq_chip ev64120_irq_type = {
-	.name		= "EV64120",
-	.ack		= disable_ev64120_irq,
-	.mask		= disable_ev64120_irq,
-	.mask_ack	= disable_ev64120_irq,
-	.unmask		= enable_ev64120_irq,
-	.end		= end_ev64120_irq,
-};
-
-void gt64120_irq_setup(void)
-{
-	/*
-	 * Clear all of the interrupts while we change the able around a bit.
-	 */
-	clear_c0_status(ST0_IM);
-
-	/*
-	 * Enable timer.  Other interrupts will be enabled as they are
-	 * registered.
-	 */
-	set_c0_status(IE_IRQ2);
-}
-
-void __init arch_init_irq(void)
-{
-	gt64120_irq_setup();
-}
diff --git a/arch/mips/gt64120/ev64120/promcon.c b/arch/mips/gt64120/ev64120/promcon.c
deleted file mode 100644
index 6e0ecfed964..00000000000
--- a/arch/mips/gt64120/ev64120/promcon.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Wrap-around code for a console using the
- * SGI PROM io-routines.
- *
- * Copyright (c) 1999 Ulf Carlsson
- *
- * Derived from DECstation promcon.c
- * Copyright (c) 1998 Harald Koerfgen
- */
-#include <linux/tty.h>
-#include <linux/init.h>
-#include <linux/console.h>
-
-static void prom_console_write(struct console *co, const char *s,
-			       unsigned count)
-{
-	extern int CONSOLE_CHANNEL;	// The default serial port
-	unsigned i;
-
-	for (i = 0; i < count; i++) {
-		if (*s == 10)
-			serial_putc(CONSOLE_CHANNEL, 13);
-		serial_putc(CONSOLE_CHANNEL, *s++);
-	}
-}
-
-static struct console sercons = {
-    .name	= "ttyS",
-    .write	= prom_console_write,
-    .flags	= CON_PRINTBUFFER,
-    .index	= -1,
-};
-
-/*
- *    Register console.
- */
-
-static int gal_serial_console_init(void)
-{
-	//  serial_init();
-	//serial_set(115200);
-
-	register_console(&sercons);
-
-	return 0;
-}
-
-console_initcall(gal_serial_console_init);
diff --git a/arch/mips/gt64120/ev64120/reset.c b/arch/mips/gt64120/ev64120/reset.c
deleted file mode 100644
index 7b9f5e5bf21..00000000000
--- a/arch/mips/gt64120/ev64120/reset.c
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1997 Ralf Baechle
- */
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/processor.h>
-#include <asm/reboot.h>
-#include <asm/system.h>
-
-void galileo_machine_restart(char *command)
-{
-	*(volatile char *) 0xbc000000 = 0x0f;
-	/*
-	 * Ouch, we're still alive ... This time we take the silver bullet ...
-	 * ... and find that we leave the hardware in a state in which the
-	 * kernel in the flush locks up somewhen during of after the PCI
-	 * detection stuff.
-	 */
-	set_c0_status(ST0_BEV | ST0_ERL);
-	change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED);
-	flush_cache_all();
-	write_c0_wired(0);
-	__asm__ __volatile__("jr\t%0"::"r"(0xbfc00000));
-}
-
-void galileo_machine_halt(void)
-{
-	printk(KERN_NOTICE "You can safely turn off the power\n");
-	while (1)
-		__asm__(".set\tmips3\n\t"
-	                "wait\n\t"
-			".set\tmips0");
-
-}
-
-void galileo_machine_power_off(void)
-{
-	galileo_machine_halt();
-}
diff --git a/arch/mips/gt64120/ev64120/serialGT.c b/arch/mips/gt64120/ev64120/serialGT.c
deleted file mode 100644
index 8f0d835491f..00000000000
--- a/arch/mips/gt64120/ev64120/serialGT.c
+++ /dev/null
@@ -1,212 +0,0 @@
-/*
- * serialGT.c
- *
- * BRIEF MODULE DESCRIPTION
- *  Low Level Serial Port control for use
- *  with the Galileo EVB64120A MIPS eval board and
- *  its on board two channel 16552 Uart.
- *
- * Copyright (C) 2000 RidgeRun, Inc.
- * Author: RidgeRun, Inc.
- *   glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-// Note:
-//   Serial CHANNELS - 0 is the bottom connector of evb64120A.
-//                       (The one that maps to the "B" channel of the
-//                       board's uart)
-//                     1 is the top connector of evb64120A.
-//                       (The one that maps to the "A" channel of the
-//                       board's uart)
-int DEBUG_CHANNEL = 0;		// See Note Above
-int CONSOLE_CHANNEL = 1;	// See Note Above
-
-#define DUART 0xBD000000	/* Base address of Uart. */
-#define CHANNELOFFSET 0x20	/* DUART+CHANNELOFFSET gets you to the ChanA
-				   register set of the 16552 Uart device.
-				   DUART+0 gets you to the ChanB register set.
-				 */
-#define DUART_DELTA 0x4
-#define FIFO_ENABLE 0x07
-#define INT_ENABLE  0x04	/* default interrupt mask */
-
-#define RBR 0x00
-#define THR 0x00
-#define DLL 0x00
-#define IER 0x01
-#define DLM 0x01
-#define IIR 0x02
-#define FCR 0x02
-#define LCR 0x03
-#define MCR 0x04
-#define LSR 0x05
-#define MSR 0x06
-#define SCR 0x07
-
-#define LCR_DLAB 0x80
-#define XTAL 1843200
-#define LSR_THRE 0x20
-#define LSR_BI   0x10
-#define LSR_DR   0x01
-#define MCR_LOOP 0x10
-#define ACCESS_DELAY 0x10000
-
-/******************************
- Routine:
- Description:
- ******************************/
-int inreg(int channel, int reg)
-{
-	int val;
-	val =
-	    *((volatile unsigned char *) DUART +
-	      (channel * CHANNELOFFSET) + (reg * DUART_DELTA));
-	return val;
-}
-
-/******************************
- Routine:
- Description:
- ******************************/
-void outreg(int channel, int reg, unsigned char val)
-{
-	*((volatile unsigned char *) DUART + (channel * CHANNELOFFSET)
-	  + (reg * DUART_DELTA)) = val;
-}
-
-/******************************
- Routine:
- Description:
-   Initialize the device driver.
- ******************************/
-void serial_init(int channel)
-{
-	/*
-	 * Configure active port, (CHANNELOFFSET already set.)
-	 *
-	 * Set 8 bits, 1 stop bit, no parity.
-	 *
-	 * LCR<7>       0       divisor latch access bit
-	 * LCR<6>       0       break control (1=send break)
-	 * LCR<5>       0       stick parity (0=space, 1=mark)
-	 * LCR<4>       0       parity even (0=odd, 1=even)
-	 * LCR<3>       0       parity enable (1=enabled)
-	 * LCR<2>       0       # stop bits (0=1, 1=1.5)
-	 * LCR<1:0>     11      bits per character(00=5, 01=6, 10=7, 11=8)
-	 */
-	outreg(channel, LCR, 0x3);
-
-	outreg(channel, FCR, FIFO_ENABLE);	/* Enable the FIFO */
-
-	outreg(channel, IER, INT_ENABLE);	/* Enable appropriate interrupts */
-}
-
-/******************************
- Routine:
- Description:
-   Set the baud rate.
- ******************************/
-void serial_set(int channel, unsigned long baud)
-{
-	unsigned char sav_lcr;
-
-	/*
-	 * Enable access to the divisor latches by setting DLAB in LCR.
-	 *
-	 */
-	sav_lcr = inreg(channel, LCR);
-
-#if 0
-	/*
-	 * Set baud rate
-	 */
-	outreg(channel, LCR, LCR_DLAB | sav_lcr);
-	//  outreg(DLL,(XTAL/(16*2*(baud))-2));
-	outreg(channel, DLL, XTAL / (16 * baud));
-	//  outreg(DLM,(XTAL/(16*2*(baud))-2)>>8);
-	outreg(channel, DLM, (XTAL / (16 * baud)) >> 8);
-#else
-	/*
-	 * Note: Set baud rate, hardcoded here for rate of 115200
-	 * since became unsure of above "baud rate" algorithm (??).
-	 */
-	outreg(channel, LCR, 0x83);
-	outreg(channel, DLM, 0x00);	// See note above
-	outreg(channel, DLL, 0x02);	// See note above.
-	outreg(channel, LCR, 0x03);
-#endif
-
-	/*
-	 * Restore line control register
-	 */
-	outreg(channel, LCR, sav_lcr);
-}
-
-
-/******************************
- Routine:
- Description:
-   Transmit a character.
- ******************************/
-void serial_putc(int channel, int c)
-{
-	while ((inreg(channel, LSR) & LSR_THRE) == 0);
-	outreg(channel, THR, c);
-}
-
-/******************************
- Routine:
- Description:
-    Read a received character if one is
-    available.  Return -1 otherwise.
- ******************************/
-int serial_getc(int channel)
-{
-	if (inreg(channel, LSR) & LSR_DR) {
-		return inreg(channel, RBR);
-	}
-	return -1;
-}
-
-/******************************
- Routine:
- Description:
-   Used by embedded gdb client. (example; gdb-stub.c)
- ******************************/
-char getDebugChar()
-{
-	int val;
-	while ((val = serial_getc(DEBUG_CHANNEL)) == -1);	// loop until we get a character in.
-	return (char) val;
-}
-
-/******************************
- Routine:
- Description:
-   Used by embedded gdb target. (example; gdb-stub.c)
- ******************************/
-void putDebugChar(char c)
-{
-	serial_putc(DEBUG_CHANNEL, (int) c);
-}
diff --git a/arch/mips/gt64120/ev64120/setup.c b/arch/mips/gt64120/ev64120/setup.c
deleted file mode 100644
index 477848c22a2..00000000000
--- a/arch/mips/gt64120/ev64120/setup.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * Copyright (C) 2000 RidgeRun, Inc.
- * Author: RidgeRun, Inc.
- *   glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/ioport.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/timex.h>
-#include <linux/pm.h>
-
-#include <asm/bootinfo.h>
-#include <asm/page.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/pci.h>
-#include <asm/processor.h>
-#include <asm/time.h>
-#include <asm/reboot.h>
-#include <asm/traps.h>
-#include <linux/bootmem.h>
-
-unsigned long gt64120_base = KSEG1ADDR(0x14000000);
-
-/* These functions are used for rebooting or halting the machine*/
-extern void galileo_machine_restart(char *command);
-extern void galileo_machine_halt(void);
-extern void galileo_machine_power_off(void);
-/*
- *This structure holds pointers to the pci configuration space accesses
- *and interrupts allocating routine for device over the PCI
- */
-extern struct pci_ops galileo_pci_ops;
-
-void __init prom_free_prom_memory(void)
-{
-}
-
-/*
- * Initializes basic routines and structures pointers, memory size (as
- * given by the bios and saves the command line.
- */
-
-void __init plat_mem_setup(void)
-{
-	_machine_restart = galileo_machine_restart;
-	_machine_halt = galileo_machine_halt;
-	pm_power_off = galileo_machine_power_off;
-
-	set_io_port_base(KSEG1);
-}
-
-const char *get_system_type(void)
-{
-	return "Galileo EV64120A";
-}
-
-/*
- * Kernel arguments passed by the firmware
- *
- * $a0 - nothing
- * $a1 - holds a pointer to the eprom parameters
- * $a2 - nothing
- */
-
-void __init prom_init(void)
-{
-	mips_machgroup = MACH_GROUP_GALILEO;
-	mips_machtype = MACH_EV64120A;
-
-	add_memory_region(0, 32 << 20, BOOT_MEM_RAM);
-}