Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:

 o Add basic support for the Mediatek/Ralink Wireless SoC family.

 o The Qualcomm Atheros platform is extended by support for the new
   QCA955X SoC series as well as a bunch of patches that get the code
   ready for OF support.

 o Lantiq and BCM47XX platform have a few improvements and bug fixes.

 o MIPS has sent a few patches that get the kernel ready for the
   upcoming microMIPS support.

 o The rest of the series is made up of small bug fixes and cleanups
   that relate to various parts of the MIPS code.  The biggy in there is
   a whitespace cleanup.  After I was sent another set of whitespace
   cleanup patches I decided it was the time to clean the whitespace
   "issues" for once and and that touches many files below arch/mips/.

Fix up silly conflicts, mostly due to whitespace cleanups.

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (105 commits)
  MIPS: Quit exporting kernel internel break codes to uapi/asm/break.h
  MIPS: remove broken conditional inside vpe loader code
  MIPS: SMTC: fix implicit declaration of set_vi_handler
  MIPS: early_printk: drop __init annotations
  MIPS: Probe for and report hardware virtualization support.
  MIPS: ath79: add support for the Qualcomm Atheros AP136-010 board
  MIPS: ath79: add USB controller registration code for the QCA955X SoCs
  MIPS: ath79: add PCI controller registration code for the QCA955X SoCs
  MIPS: ath79: add WMAC registration code for the QCA955X SoCs
  MIPS: ath79: register UART for the QCA955X SoCs
  MIPS: ath79: add QCA955X specific glue to ath79_device_reset_{set, clear}
  MIPS: ath79: add GPIO setup code for the QCA955X SoCs
  MIPS: ath79: add IRQ handling code for the QCA955X SoCs
  MIPS: ath79: add clock setup code for the QCA955X SoCs
  MIPS: ath79: add SoC detection code for the QCA955X SoCs
  MIPS: ath79: add early printk support for the QCA955X SoCs
  MIPS: ath79: fix WMAC IRQ resource assignment
  mips: reserve elfcorehdr
  mips: Make sure kernel memory is in iomem
  MIPS: ath79: use dynamically allocated USB platform devices
  ...

1 files changed, 25 insertions, 25 deletions

diff --git a/arch/mips/include/asm/jazzdma.h b/arch/mips/include/asm/jazzdma.h
index 8bb37bba68f..2cefc3c4724 100644
--- a/arch/mips/include/asm/jazzdma.h
+++ b/arch/mips/include/asm/jazzdma.h
@@ -10,7 +10,7 @@
 extern unsigned long vdma_alloc(unsigned long paddr, unsigned long size);
 extern int vdma_free(unsigned long laddr);
 extern int vdma_remap(unsigned long laddr, unsigned long paddr,
-                      unsigned long size);
+		      unsigned long size);
 extern unsigned long vdma_phys2log(unsigned long paddr);
 extern unsigned long vdma_log2phys(unsigned long laddr);
 extern void vdma_stats(void);		/* for debugging only */
@@ -35,14 +35,14 @@ extern int vdma_get_enable(int channel);
  * Macros to get page no. and offset of a given address
  * Note that VDMA_PAGE() works for physical addresses only
  */
-#define VDMA_PAGE(a)            ((unsigned int)(a) >> 12)
-#define VDMA_OFFSET(a)          ((unsigned int)(a) & (VDMA_PAGESIZE-1))
+#define VDMA_PAGE(a)		((unsigned int)(a) >> 12)
+#define VDMA_OFFSET(a)		((unsigned int)(a) & (VDMA_PAGESIZE-1))
 
 /*
  * error code returned by vdma_alloc()
  * (See also arch/mips/kernel/jazzdma.c)
  */
-#define VDMA_ERROR              0xffffffff
+#define VDMA_ERROR		0xffffffff
 
 /*
  * VDMA pagetable entry description
@@ -59,37 +59,37 @@ typedef volatile struct VDMA_PGTBL_ENTRY {
  */
 #define JAZZ_R4030_CHNL_MODE	0xE0000100	/* 8 DMA Channel Mode Registers, */
 						/* 0xE0000100,120,140... */
-#define JAZZ_R4030_CHNL_ENABLE  0xE0000108	/* 8 DMA Channel Enable Regs, */
+#define JAZZ_R4030_CHNL_ENABLE	0xE0000108	/* 8 DMA Channel Enable Regs, */
 						/* 0xE0000108,128,148... */
-#define JAZZ_R4030_CHNL_COUNT   0xE0000110	/* 8 DMA Channel Byte Cnt Regs, */
+#define JAZZ_R4030_CHNL_COUNT	0xE0000110	/* 8 DMA Channel Byte Cnt Regs, */
 						/* 0xE0000110,130,150... */
 #define JAZZ_R4030_CHNL_ADDR	0xE0000118	/* 8 DMA Channel Address Regs, */
 						/* 0xE0000118,138,158... */
 
 /* channel enable register bits */
 
-#define R4030_CHNL_ENABLE        (1<<0)
-#define R4030_CHNL_WRITE         (1<<1)
-#define R4030_TC_INTR            (1<<8)
-#define R4030_MEM_INTR           (1<<9)
-#define R4030_ADDR_INTR          (1<<10)
+#define R4030_CHNL_ENABLE	 (1<<0)
+#define R4030_CHNL_WRITE	 (1<<1)
+#define R4030_TC_INTR		 (1<<8)
+#define R4030_MEM_INTR		 (1<<9)
+#define R4030_ADDR_INTR		 (1<<10)
 
 /*
  * Channel mode register bits
  */
-#define R4030_MODE_ATIME_40      (0) /* device access time on remote bus */
-#define R4030_MODE_ATIME_80      (1)
-#define R4030_MODE_ATIME_120     (2)
-#define R4030_MODE_ATIME_160     (3)
-#define R4030_MODE_ATIME_200     (4)
-#define R4030_MODE_ATIME_240     (5)
-#define R4030_MODE_ATIME_280     (6)
-#define R4030_MODE_ATIME_320     (7)
-#define R4030_MODE_WIDTH_8       (1<<3)	/* device data bus width */
-#define R4030_MODE_WIDTH_16      (2<<3)
-#define R4030_MODE_WIDTH_32      (3<<3)
-#define R4030_MODE_INTR_EN       (1<<5)
-#define R4030_MODE_BURST         (1<<6)	/* Rev. 2 only */
-#define R4030_MODE_FAST_ACK      (1<<7)	/* Rev. 2 only */
+#define R4030_MODE_ATIME_40	 (0) /* device access time on remote bus */
+#define R4030_MODE_ATIME_80	 (1)
+#define R4030_MODE_ATIME_120	 (2)
+#define R4030_MODE_ATIME_160	 (3)
+#define R4030_MODE_ATIME_200	 (4)
+#define R4030_MODE_ATIME_240	 (5)
+#define R4030_MODE_ATIME_280	 (6)
+#define R4030_MODE_ATIME_320	 (7)
+#define R4030_MODE_WIDTH_8	 (1<<3) /* device data bus width */
+#define R4030_MODE_WIDTH_16	 (2<<3)
+#define R4030_MODE_WIDTH_32	 (3<<3)
+#define R4030_MODE_INTR_EN	 (1<<5)
+#define R4030_MODE_BURST	 (1<<6) /* Rev. 2 only */
+#define R4030_MODE_FAST_ACK	 (1<<7) /* Rev. 2 only */
 
 #endif /* _ASM_JAZZDMA_H */