Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:
 "This is an unusually large pull request for MIPS - in parts because
  lots of patches missed the 3.18 deadline but primarily because some
  folks opened the flood gates.

   - Retire the MIPS-specific phys_t with the generic phys_addr_t.
   - Improvments for the backtrace code used by oprofile.
   - Better backtraces on SMP systems.
   - Cleanups for the Octeon platform code.
   - Cleanups and fixes for the Loongson platform code.
   - Cleanups and fixes to the firmware library.
   - Switch ATH79 platform to use the firmware library.
   - Grand overhault to the SEAD3 and Malta interrupt code.
   - Move the GIC interrupt code to drivers/irqchip
   - Lots of GIC cleanups and updates to the GIC code to use modern IRQ
     infrastructures and features of the kernel.
   - OF documentation updates for the GIC bindings
   - Move GIC clocksource driver to drivers/clocksource
   - Merge GIC clocksource driver with clockevent driver.
   - Further updates to bring the GIC clocksource driver up to date.
   - R3000 TLB code cleanups
   - Improvments to the Loongson 3 platform code.
   - Convert pr_warning to pr_warn.
   - Merge a bunch of small lantiq and ralink fixes that have been
     staged/lingering inside the openwrt tree for a while.
   - Update archhelp for IP22/IP32
   - Fix a number of issues for Loongson 1B.
   - New clocksource and clockevent driver for Loongson 1B.
   - Further work on clk handling for Loongson 1B.
   - Platform work for Broadcom BMIPS.
   - Error handling cleanups for TurboChannel.
   - Fixes and optimization to the microMIPS support.
   - Option to disable the FTLB.
   - Dump more relevant information on machine check exception
   - Change binfmt to allow arch to examine PT_*PROC headers
   - Support for new style FPU register model in O32
   - VDSO randomization.
   - BCM47xx cleanups
   - BCM47xx reimplement the way the kernel accesses NVRAM information.
   - Random cleanups
   - Add support for ATH25 platforms
   - Remove pointless locking code in some PCI platforms.
   - Some improvments to EVA support
   - Minor Alchemy cleanup"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (185 commits)
  MIPS: Add MFHC0 and MTHC0 instructions to uasm.
  MIPS: Cosmetic cleanups of page table headers.
  MIPS: Add CP0 macros for extended EntryLo registers
  MIPS: Remove now unused definition of phys_t.
  MIPS: Replace use of phys_t with phys_addr_t.
  MIPS: Replace MIPS-specific 64BIT_PHYS_ADDR with generic PHYS_ADDR_T_64BIT
  PCMCIA: Alchemy Don't select 64BIT_PHYS_ADDR in Kconfig.
  MIPS: lib: memset: Clean up some MIPS{EL,EB} ifdefery
  MIPS: iomap: Use __mem_{read,write}{b,w,l} for MMIO
  MIPS: <asm/types.h> fix indentation.
  MAINTAINERS: Add entry for BMIPS multiplatform kernel
  MIPS: Enable VDSO randomization
  MIPS: Remove a temporary hack for debugging cache flushes in SMTC configuration
  MIPS: Remove declaration of obsolete arch_init_clk_ops()
  MIPS: atomic.h: Reformat to fit in 79 columns
  MIPS: Apply `.insn' to fixup labels throughout
  MIPS: Fix microMIPS LL/SC immediate offsets
  MIPS: Kconfig: Only allow 32-bit microMIPS builds
  MIPS: signal.c: Fix an invalid cast in ISA mode bit handling
  MIPS: mm: Only build one microassembler that is suitable
  ...

1 files changed, 9 insertions, 9 deletions

diff --git a/arch/mips/include/asm/pgtable.h b/arch/mips/include/asm/pgtable.h
index d6d1928539b..62a6ba383d4 100644
--- a/arch/mips/include/asm/pgtable.h
+++ b/arch/mips/include/asm/pgtable.h
@@ -125,7 +125,7 @@ do {									\
 extern void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep,
 	pte_t pteval);
 
-#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+#if defined(CONFIG_PHYS_ADDR_T_64BIT) && defined(CONFIG_CPU_MIPS32)
 
 #define pte_none(pte)		(!(((pte).pte_low | (pte).pte_high) & ~_PAGE_GLOBAL))
 #define pte_present(pte)	((pte).pte_low & _PAGE_PRESENT)
@@ -227,7 +227,7 @@ extern pgd_t swapper_pg_dir[];
  * The following only work if pte_present() is true.
  * Undefined behaviour if not..
  */
-#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+#if defined(CONFIG_PHYS_ADDR_T_64BIT) && defined(CONFIG_CPU_MIPS32)
 static inline int pte_write(pte_t pte)	{ return pte.pte_low & _PAGE_WRITE; }
 static inline int pte_dirty(pte_t pte)	{ return pte.pte_low & _PAGE_MODIFIED; }
 static inline int pte_young(pte_t pte)	{ return pte.pte_low & _PAGE_ACCESSED; }
@@ -297,13 +297,13 @@ static inline pte_t pte_wrprotect(pte_t pte)
 
 static inline pte_t pte_mkclean(pte_t pte)
 {
-	pte_val(pte) &= ~(_PAGE_MODIFIED|_PAGE_SILENT_WRITE);
+	pte_val(pte) &= ~(_PAGE_MODIFIED | _PAGE_SILENT_WRITE);
 	return pte;
 }
 
 static inline pte_t pte_mkold(pte_t pte)
 {
-	pte_val(pte) &= ~(_PAGE_ACCESSED|_PAGE_SILENT_READ);
+	pte_val(pte) &= ~(_PAGE_ACCESSED | _PAGE_SILENT_READ);
 	return pte;
 }
 
@@ -382,13 +382,13 @@ static inline pgprot_t pgprot_writecombine(pgprot_t _prot)
  */
 #define mk_pte(page, pgprot)	pfn_pte(page_to_pfn(page), (pgprot))
 
-#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+#if defined(CONFIG_PHYS_ADDR_T_64BIT) && defined(CONFIG_CPU_MIPS32)
 static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 {
 	pte.pte_low  &= _PAGE_CHG_MASK;
-	pte.pte_high &= ~0x3f;
+	pte.pte_high &= (_PFN_MASK | _CACHE_MASK);
 	pte.pte_low  |= pgprot_val(newprot);
-	pte.pte_high |= pgprot_val(newprot) & 0x3f;
+	pte.pte_high |= pgprot_val(newprot) & ~(_PFN_MASK | _CACHE_MASK);
 	return pte;
 }
 #else
@@ -419,7 +419,7 @@ static inline void update_mmu_cache_pmd(struct vm_area_struct *vma,
 
 #define kern_addr_valid(addr)	(1)
 
-#ifdef CONFIG_64BIT_PHYS_ADDR
+#ifdef CONFIG_PHYS_ADDR_T_64BIT
 extern int remap_pfn_range(struct vm_area_struct *vma, unsigned long from, unsigned long pfn, unsigned long size, pgprot_t prot);
 
 static inline int io_remap_pfn_range(struct vm_area_struct *vma,
@@ -428,7 +428,7 @@ static inline int io_remap_pfn_range(struct vm_area_struct *vma,
 		unsigned long size,
 		pgprot_t prot)
 {
-	phys_t phys_addr_high = fixup_bigphys_addr(pfn << PAGE_SHIFT, size);
+	phys_addr_t phys_addr_high = fixup_bigphys_addr(pfn << PAGE_SHIFT, size);
 	return remap_pfn_range(vma, vaddr, phys_addr_high >> PAGE_SHIFT, size, prot);
 }
 #define io_remap_pfn_range io_remap_pfn_range