Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into rmobile-latest

32 files changed, 2536 insertions, 0 deletions

diff --git a/arch/mips/lantiq/Kconfig b/arch/mips/lantiq/Kconfig
new file mode 100644
index 00000000000..3fccf210451
--- /dev/null
+++ b/arch/mips/lantiq/Kconfig
@@ -0,0 +1,23 @@
+if LANTIQ
+
+config SOC_TYPE_XWAY
+	bool
+	default n
+
+choice
+	prompt "SoC Type"
+	default SOC_XWAY
+
+config SOC_AMAZON_SE
+	bool "Amazon SE"
+	select SOC_TYPE_XWAY
+
+config SOC_XWAY
+	bool "XWAY"
+	select SOC_TYPE_XWAY
+	select HW_HAS_PCI
+endchoice
+
+source "arch/mips/lantiq/xway/Kconfig"
+
+endif
diff --git a/arch/mips/lantiq/Makefile b/arch/mips/lantiq/Makefile
new file mode 100644
index 00000000000..e5dae0e24b0
--- /dev/null
+++ b/arch/mips/lantiq/Makefile
@@ -0,0 +1,11 @@
+# Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License version 2 as published
+# by the Free Software Foundation.
+
+obj-y := irq.o setup.o clk.o prom.o devices.o
+
+obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+
+obj-$(CONFIG_SOC_TYPE_XWAY) += xway/
diff --git a/arch/mips/lantiq/Platform b/arch/mips/lantiq/Platform
new file mode 100644
index 00000000000..f3dff05722d
--- /dev/null
+++ b/arch/mips/lantiq/Platform
@@ -0,0 +1,8 @@
+#
+# Lantiq
+#
+
+platform-$(CONFIG_LANTIQ)	+= lantiq/
+cflags-$(CONFIG_LANTIQ)		+= -I$(srctree)/arch/mips/include/asm/mach-lantiq
+load-$(CONFIG_LANTIQ)		= 0xffffffff80002000
+cflags-$(CONFIG_SOC_TYPE_XWAY)	+= -I$(srctree)/arch/mips/include/asm/mach-lantiq/xway
diff --git a/arch/mips/lantiq/clk.c b/arch/mips/lantiq/clk.c
new file mode 100644
index 00000000000..94560899d13
--- /dev/null
+++ b/arch/mips/lantiq/clk.c
@@ -0,0 +1,140 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ * Copyright (C) 2010 Thomas Langer <thomas.langer@lantiq.com>
+ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/list.h>
+
+#include <asm/time.h>
+#include <asm/irq.h>
+#include <asm/div64.h>
+
+#include <lantiq_soc.h>
+
+#include "clk.h"
+
+struct clk {
+	const char *name;
+	unsigned long rate;
+	unsigned long (*get_rate) (void);
+};
+
+static struct clk *cpu_clk;
+static int cpu_clk_cnt;
+
+/* lantiq socs have 3 static clocks */
+static struct clk cpu_clk_generic[] = {
+	{
+		.name = "cpu",
+		.get_rate = ltq_get_cpu_hz,
+	}, {
+		.name = "fpi",
+		.get_rate = ltq_get_fpi_hz,
+	}, {
+		.name = "io",
+		.get_rate = ltq_get_io_region_clock,
+	},
+};
+
+static struct resource ltq_cgu_resource = {
+	.name	= "cgu",
+	.start	= LTQ_CGU_BASE_ADDR,
+	.end	= LTQ_CGU_BASE_ADDR + LTQ_CGU_SIZE - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+/* remapped clock register range */
+void __iomem *ltq_cgu_membase;
+
+void clk_init(void)
+{
+	cpu_clk = cpu_clk_generic;
+	cpu_clk_cnt = ARRAY_SIZE(cpu_clk_generic);
+}
+
+static inline int clk_good(struct clk *clk)
+{
+	return clk && !IS_ERR(clk);
+}
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	if (unlikely(!clk_good(clk)))
+		return 0;
+
+	if (clk->rate != 0)
+		return clk->rate;
+
+	if (clk->get_rate != NULL)
+		return clk->get_rate();
+
+	return 0;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+	int i;
+
+	for (i = 0; i < cpu_clk_cnt; i++)
+		if (!strcmp(id, cpu_clk[i].name))
+			return &cpu_clk[i];
+	BUG();
+	return ERR_PTR(-ENOENT);
+}
+EXPORT_SYMBOL(clk_get);
+
+void clk_put(struct clk *clk)
+{
+	/* not used */
+}
+EXPORT_SYMBOL(clk_put);
+
+static inline u32 ltq_get_counter_resolution(void)
+{
+	u32 res;
+
+	__asm__ __volatile__(
+		".set   push\n"
+		".set   mips32r2\n"
+		"rdhwr  %0, $3\n"
+		".set pop\n"
+		: "=&r" (res)
+		: /* no input */
+		: "memory");
+
+	return res;
+}
+
+void __init plat_time_init(void)
+{
+	struct clk *clk;
+
+	if (insert_resource(&iomem_resource, &ltq_cgu_resource) < 0)
+		panic("Failed to insert cgu memory\n");
+
+	if (request_mem_region(ltq_cgu_resource.start,
+			resource_size(&ltq_cgu_resource), "cgu") < 0)
+		panic("Failed to request cgu memory\n");
+
+	ltq_cgu_membase = ioremap_nocache(ltq_cgu_resource.start,
+				resource_size(&ltq_cgu_resource));
+	if (!ltq_cgu_membase) {
+		pr_err("Failed to remap cgu memory\n");
+		unreachable();
+	}
+	clk = clk_get(0, "cpu");
+	mips_hpt_frequency = clk_get_rate(clk) / ltq_get_counter_resolution();
+	write_c0_compare(read_c0_count());
+	clk_put(clk);
+}
diff --git a/arch/mips/lantiq/clk.h b/arch/mips/lantiq/clk.h
new file mode 100644
index 00000000000..3328925f2c3
--- /dev/null
+++ b/arch/mips/lantiq/clk.h
@@ -0,0 +1,18 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#ifndef _LTQ_CLK_H__
+#define _LTQ_CLK_H__
+
+extern void clk_init(void);
+
+extern unsigned long ltq_get_cpu_hz(void);
+extern unsigned long ltq_get_fpi_hz(void);
+extern unsigned long ltq_get_io_region_clock(void);
+
+#endif
diff --git a/arch/mips/lantiq/devices.c b/arch/mips/lantiq/devices.c
new file mode 100644
index 00000000000..7b82c34cb16
--- /dev/null
+++ b/arch/mips/lantiq/devices.c
@@ -0,0 +1,122 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/reboot.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/etherdevice.h>
+#include <linux/reboot.h>
+#include <linux/time.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+
+#include <asm/bootinfo.h>
+#include <asm/irq.h>
+
+#include <lantiq_soc.h>
+
+#include "devices.h"
+
+/* nor flash */
+static struct resource ltq_nor_resource = {
+	.name	= "nor",
+	.start	= LTQ_FLASH_START,
+	.end	= LTQ_FLASH_START + LTQ_FLASH_MAX - 1,
+	.flags  = IORESOURCE_MEM,
+};
+
+static struct platform_device ltq_nor = {
+	.name		= "ltq_nor",
+	.resource	= &ltq_nor_resource,
+	.num_resources	= 1,
+};
+
+void __init ltq_register_nor(struct physmap_flash_data *data)
+{
+	ltq_nor.dev.platform_data = data;
+	platform_device_register(&ltq_nor);
+}
+
+/* watchdog */
+static struct resource ltq_wdt_resource = {
+	.name	= "watchdog",
+	.start  = LTQ_WDT_BASE_ADDR,
+	.end    = LTQ_WDT_BASE_ADDR + LTQ_WDT_SIZE - 1,
+	.flags  = IORESOURCE_MEM,
+};
+
+void __init ltq_register_wdt(void)
+{
+	platform_device_register_simple("ltq_wdt", 0, &ltq_wdt_resource, 1);
+}
+
+/* asc ports */
+static struct resource ltq_asc0_resources[] = {
+	{
+		.name	= "asc0",
+		.start  = LTQ_ASC0_BASE_ADDR,
+		.end    = LTQ_ASC0_BASE_ADDR + LTQ_ASC_SIZE - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	IRQ_RES(tx, LTQ_ASC_TIR(0)),
+	IRQ_RES(rx, LTQ_ASC_RIR(0)),
+	IRQ_RES(err, LTQ_ASC_EIR(0)),
+};
+
+static struct resource ltq_asc1_resources[] = {
+	{
+		.name	= "asc1",
+		.start  = LTQ_ASC1_BASE_ADDR,
+		.end    = LTQ_ASC1_BASE_ADDR + LTQ_ASC_SIZE - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	IRQ_RES(tx, LTQ_ASC_TIR(1)),
+	IRQ_RES(rx, LTQ_ASC_RIR(1)),
+	IRQ_RES(err, LTQ_ASC_EIR(1)),
+};
+
+void __init ltq_register_asc(int port)
+{
+	switch (port) {
+	case 0:
+		platform_device_register_simple("ltq_asc", 0,
+			ltq_asc0_resources, ARRAY_SIZE(ltq_asc0_resources));
+		break;
+	case 1:
+		platform_device_register_simple("ltq_asc", 1,
+			ltq_asc1_resources, ARRAY_SIZE(ltq_asc1_resources));
+		break;
+	default:
+		break;
+	}
+}
+
+#ifdef CONFIG_PCI
+/* pci */
+static struct platform_device ltq_pci = {
+	.name		= "ltq_pci",
+	.num_resources	= 0,
+};
+
+void __init ltq_register_pci(struct ltq_pci_data *data)
+{
+	ltq_pci.dev.platform_data = data;
+	platform_device_register(&ltq_pci);
+}
+#else
+void __init ltq_register_pci(struct ltq_pci_data *data)
+{
+	pr_err("kernel is compiled without PCI support\n");
+}
+#endif
diff --git a/arch/mips/lantiq/devices.h b/arch/mips/lantiq/devices.h
new file mode 100644
index 00000000000..2947bb19a52
--- /dev/null
+++ b/arch/mips/lantiq/devices.h
@@ -0,0 +1,23 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#ifndef _LTQ_DEVICES_H__
+#define _LTQ_DEVICES_H__
+
+#include <lantiq_platform.h>
+#include <linux/mtd/physmap.h>
+
+#define IRQ_RES(resname, irq) \
+	{.name = #resname, .start = (irq), .flags = IORESOURCE_IRQ}
+
+extern void ltq_register_nor(struct physmap_flash_data *data);
+extern void ltq_register_wdt(void);
+extern void ltq_register_asc(int port);
+extern void ltq_register_pci(struct ltq_pci_data *data);
+
+#endif
diff --git a/arch/mips/lantiq/early_printk.c b/arch/mips/lantiq/early_printk.c
new file mode 100644
index 00000000000..972e05f8763
--- /dev/null
+++ b/arch/mips/lantiq/early_printk.c
@@ -0,0 +1,33 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/init.h>
+#include <linux/cpu.h>
+
+#include <lantiq.h>
+#include <lantiq_soc.h>
+
+/* no ioremap possible at this early stage, lets use KSEG1 instead  */
+#define LTQ_ASC_BASE	KSEG1ADDR(LTQ_ASC1_BASE_ADDR)
+#define ASC_BUF		1024
+#define LTQ_ASC_FSTAT	((u32 *)(LTQ_ASC_BASE + 0x0048))
+#define LTQ_ASC_TBUF	((u32 *)(LTQ_ASC_BASE + 0x0020))
+#define TXMASK		0x3F00
+#define TXOFFSET	8
+
+void prom_putchar(char c)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	do { } while ((ltq_r32(LTQ_ASC_FSTAT) & TXMASK) >> TXOFFSET);
+	if (c == '\n')
+		ltq_w32('\r', LTQ_ASC_TBUF);
+	ltq_w32(c, LTQ_ASC_TBUF);
+	local_irq_restore(flags);
+}
diff --git a/arch/mips/lantiq/irq.c b/arch/mips/lantiq/irq.c
new file mode 100644
index 00000000000..fc89795cafd
--- /dev/null
+++ b/arch/mips/lantiq/irq.c
@@ -0,0 +1,326 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ * Copyright (C) 2010 Thomas Langer <thomas.langer@lantiq.com>
+ */
+
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+
+#include <asm/bootinfo.h>
+#include <asm/irq_cpu.h>
+
+#include <lantiq_soc.h>
+#include <irq.h>
+
+/* register definitions */
+#define LTQ_ICU_IM0_ISR		0x0000
+#define LTQ_ICU_IM0_IER		0x0008
+#define LTQ_ICU_IM0_IOSR	0x0010
+#define LTQ_ICU_IM0_IRSR	0x0018
+#define LTQ_ICU_IM0_IMR		0x0020
+#define LTQ_ICU_IM1_ISR		0x0028
+#define LTQ_ICU_OFFSET		(LTQ_ICU_IM1_ISR - LTQ_ICU_IM0_ISR)
+
+#define LTQ_EIU_EXIN_C		0x0000
+#define LTQ_EIU_EXIN_INIC	0x0004
+#define LTQ_EIU_EXIN_INEN	0x000C
+
+/* irq numbers used by the external interrupt unit (EIU) */
+#define LTQ_EIU_IR0		(INT_NUM_IM4_IRL0 + 30)
+#define LTQ_EIU_IR1		(INT_NUM_IM3_IRL0 + 31)
+#define LTQ_EIU_IR2		(INT_NUM_IM1_IRL0 + 26)
+#define LTQ_EIU_IR3		INT_NUM_IM1_IRL0
+#define LTQ_EIU_IR4		(INT_NUM_IM1_IRL0 + 1)
+#define LTQ_EIU_IR5		(INT_NUM_IM1_IRL0 + 2)
+#define LTQ_EIU_IR6		(INT_NUM_IM2_IRL0 + 30)
+
+#define MAX_EIU			6
+
+/* irqs generated by device attached to the EBU need to be acked in
+ * a special manner
+ */
+#define LTQ_ICU_EBU_IRQ		22
+
+#define ltq_icu_w32(x, y)	ltq_w32((x), ltq_icu_membase + (y))
+#define ltq_icu_r32(x)		ltq_r32(ltq_icu_membase + (x))
+
+#define ltq_eiu_w32(x, y)	ltq_w32((x), ltq_eiu_membase + (y))
+#define ltq_eiu_r32(x)		ltq_r32(ltq_eiu_membase + (x))
+
+static unsigned short ltq_eiu_irq[MAX_EIU] = {
+	LTQ_EIU_IR0,
+	LTQ_EIU_IR1,
+	LTQ_EIU_IR2,
+	LTQ_EIU_IR3,
+	LTQ_EIU_IR4,
+	LTQ_EIU_IR5,
+};
+
+static struct resource ltq_icu_resource = {
+	.name	= "icu",
+	.start	= LTQ_ICU_BASE_ADDR,
+	.end	= LTQ_ICU_BASE_ADDR + LTQ_ICU_SIZE - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct resource ltq_eiu_resource = {
+	.name	= "eiu",
+	.start	= LTQ_EIU_BASE_ADDR,
+	.end	= LTQ_EIU_BASE_ADDR + LTQ_ICU_SIZE - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static void __iomem *ltq_icu_membase;
+static void __iomem *ltq_eiu_membase;
+
+void ltq_disable_irq(struct irq_data *d)
+{
+	u32 ier = LTQ_ICU_IM0_IER;
+	int irq_nr = d->irq - INT_NUM_IRQ0;
+
+	ier += LTQ_ICU_OFFSET * (irq_nr / INT_NUM_IM_OFFSET);
+	irq_nr %= INT_NUM_IM_OFFSET;
+	ltq_icu_w32(ltq_icu_r32(ier) & ~(1 << irq_nr), ier);
+}
+
+void ltq_mask_and_ack_irq(struct irq_data *d)
+{
+	u32 ier = LTQ_ICU_IM0_IER;
+	u32 isr = LTQ_ICU_IM0_ISR;
+	int irq_nr = d->irq - INT_NUM_IRQ0;
+
+	ier += LTQ_ICU_OFFSET * (irq_nr / INT_NUM_IM_OFFSET);
+	isr += LTQ_ICU_OFFSET * (irq_nr / INT_NUM_IM_OFFSET);
+	irq_nr %= INT_NUM_IM_OFFSET;
+	ltq_icu_w32(ltq_icu_r32(ier) & ~(1 << irq_nr), ier);
+	ltq_icu_w32((1 << irq_nr), isr);
+}
+
+static void ltq_ack_irq(struct irq_data *d)
+{
+	u32 isr = LTQ_ICU_IM0_ISR;
+	int irq_nr = d->irq - INT_NUM_IRQ0;
+
+	isr += LTQ_ICU_OFFSET * (irq_nr / INT_NUM_IM_OFFSET);
+	irq_nr %= INT_NUM_IM_OFFSET;
+	ltq_icu_w32((1 << irq_nr), isr);
+}
+
+void ltq_enable_irq(struct irq_data *d)
+{
+	u32 ier = LTQ_ICU_IM0_IER;
+	int irq_nr = d->irq - INT_NUM_IRQ0;
+
+	ier += LTQ_ICU_OFFSET  * (irq_nr / INT_NUM_IM_OFFSET);
+	irq_nr %= INT_NUM_IM_OFFSET;
+	ltq_icu_w32(ltq_icu_r32(ier) | (1 << irq_nr), ier);
+}
+
+static unsigned int ltq_startup_eiu_irq(struct irq_data *d)
+{
+	int i;
+	int irq_nr = d->irq - INT_NUM_IRQ0;
+
+	ltq_enable_irq(d);
+	for (i = 0; i < MAX_EIU; i++) {
+		if (irq_nr == ltq_eiu_irq[i]) {
+			/* low level - we should really handle set_type */
+			ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_C) |
+				(0x6 << (i * 4)), LTQ_EIU_EXIN_C);
+			/* clear all pending */
+			ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_INIC) & ~(1 << i),
+				LTQ_EIU_EXIN_INIC);
+			/* enable */
+			ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_INEN) | (1 << i),
+				LTQ_EIU_EXIN_INEN);
+			break;
+		}
+	}
+
+	return 0;
+}
+
+static void ltq_shutdown_eiu_irq(struct irq_data *d)
+{
+	int i;
+	int irq_nr = d->irq - INT_NUM_IRQ0;
+
+	ltq_disable_irq(d);
+	for (i = 0; i < MAX_EIU; i++) {
+		if (irq_nr == ltq_eiu_irq[i]) {
+			/* disable */
+			ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_INEN) & ~(1 << i),
+				LTQ_EIU_EXIN_INEN);
+			break;
+		}
+	}
+}
+
+static struct irq_chip ltq_irq_type = {
+	"icu",
+	.irq_enable = ltq_enable_irq,
+	.irq_disable = ltq_disable_irq,
+	.irq_unmask = ltq_enable_irq,
+	.irq_ack = ltq_ack_irq,
+	.irq_mask = ltq_disable_irq,
+	.irq_mask_ack = ltq_mask_and_ack_irq,
+};
+
+static struct irq_chip ltq_eiu_type = {
+	"eiu",
+	.irq_startup = ltq_startup_eiu_irq,
+	.irq_shutdown = ltq_shutdown_eiu_irq,
+	.irq_enable = ltq_enable_irq,
+	.irq_disable = ltq_disable_irq,
+	.irq_unmask = ltq_enable_irq,
+	.irq_ack = ltq_ack_irq,
+	.irq_mask = ltq_disable_irq,
+	.irq_mask_ack = ltq_mask_and_ack_irq,
+};
+
+static void ltq_hw_irqdispatch(int module)
+{
+	u32 irq;
+
+	irq = ltq_icu_r32(LTQ_ICU_IM0_IOSR + (module * LTQ_ICU_OFFSET));
+	if (irq == 0)
+		return;
+
+	/* silicon bug causes only the msb set to 1 to be valid. all
+	 * other bits might be bogus
+	 */
+	irq = __fls(irq);
+	do_IRQ((int)irq + INT_NUM_IM0_IRL0 + (INT_NUM_IM_OFFSET * module));
+
+	/* if this is a EBU irq, we need to ack it or get a deadlock */
+	if ((irq == LTQ_ICU_EBU_IRQ) && (module == 0))
+		ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_PCC_ISTAT) | 0x10,
+			LTQ_EBU_PCC_ISTAT);
+}
+
+#define DEFINE_HWx_IRQDISPATCH(x)					\
+	static void ltq_hw ## x ## _irqdispatch(void)			\
+	{								\
+		ltq_hw_irqdispatch(x);					\
+	}
+DEFINE_HWx_IRQDISPATCH(0)
+DEFINE_HWx_IRQDISPATCH(1)
+DEFINE_HWx_IRQDISPATCH(2)
+DEFINE_HWx_IRQDISPATCH(3)
+DEFINE_HWx_IRQDISPATCH(4)
+
+static void ltq_hw5_irqdispatch(void)
+{
+	do_IRQ(MIPS_CPU_TIMER_IRQ);
+}
+
+asmlinkage void plat_irq_dispatch(void)
+{
+	unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
+	unsigned int i;
+
+	if (pending & CAUSEF_IP7) {
+		do_IRQ(MIPS_CPU_TIMER_IRQ);
+		goto out;
+	} else {
+		for (i = 0; i < 5; i++) {
+			if (pending & (CAUSEF_IP2 << i)) {
+				ltq_hw_irqdispatch(i);
+				goto out;
+			}
+		}
+	}
+	pr_alert("Spurious IRQ: CAUSE=0x%08x\n", read_c0_status());
+
+out:
+	return;
+}
+
+static struct irqaction cascade = {
+	.handler = no_action,
+	.flags = IRQF_DISABLED,
+	.name = "cascade",
+};
+
+void __init arch_init_irq(void)
+{
+	int i;
+
+	if (insert_resource(&iomem_resource, &ltq_icu_resource) < 0)
+		panic("Failed to insert icu memory\n");
+
+	if (request_mem_region(ltq_icu_resource.start,
+			resource_size(&ltq_icu_resource), "icu") < 0)
+		panic("Failed to request icu memory\n");
+
+	ltq_icu_membase = ioremap_nocache(ltq_icu_resource.start,
+				resource_size(&ltq_icu_resource));
+	if (!ltq_icu_membase)
+		panic("Failed to remap icu memory\n");
+
+	if (insert_resource(&iomem_resource, &ltq_eiu_resource) < 0)
+		panic("Failed to insert eiu memory\n");
+
+	if (request_mem_region(ltq_eiu_resource.start,
+			resource_size(&ltq_eiu_resource), "eiu") < 0)
+		panic("Failed to request eiu memory\n");
+
+	ltq_eiu_membase = ioremap_nocache(ltq_eiu_resource.start,
+				resource_size(&ltq_eiu_resource));
+	if (!ltq_eiu_membase)
+		panic("Failed to remap eiu memory\n");
+
+	/* make sure all irqs are turned off by default */
+	for (i = 0; i < 5; i++)
+		ltq_icu_w32(0, LTQ_ICU_IM0_IER + (i * LTQ_ICU_OFFSET));
+
+	/* clear all possibly pending interrupts */
+	ltq_icu_w32(~0, LTQ_ICU_IM0_ISR + (i * LTQ_ICU_OFFSET));
+
+	mips_cpu_irq_init();
+
+	for (i = 2; i <= 6; i++)
+		setup_irq(i, &cascade);
+
+	if (cpu_has_vint) {
+		pr_info("Setting up vectored interrupts\n");
+		set_vi_handler(2, ltq_hw0_irqdispatch);
+		set_vi_handler(3, ltq_hw1_irqdispatch);
+		set_vi_handler(4, ltq_hw2_irqdispatch);
+		set_vi_handler(5, ltq_hw3_irqdispatch);
+		set_vi_handler(6, ltq_hw4_irqdispatch);
+		set_vi_handler(7, ltq_hw5_irqdispatch);
+	}
+
+	for (i = INT_NUM_IRQ0;
+		i <= (INT_NUM_IRQ0 + (5 * INT_NUM_IM_OFFSET)); i++)
+		if ((i == LTQ_EIU_IR0) || (i == LTQ_EIU_IR1) ||
+			(i == LTQ_EIU_IR2))
+			irq_set_chip_and_handler(i, &ltq_eiu_type,
+				handle_level_irq);
+		/* EIU3-5 only exist on ar9 and vr9 */
+		else if (((i == LTQ_EIU_IR3) || (i == LTQ_EIU_IR4) ||
+			(i == LTQ_EIU_IR5)) && (ltq_is_ar9() || ltq_is_vr9()))
+			irq_set_chip_and_handler(i, &ltq_eiu_type,
+				handle_level_irq);
+		else
+			irq_set_chip_and_handler(i, &ltq_irq_type,
+				handle_level_irq);
+
+#if !defined(CONFIG_MIPS_MT_SMP) && !defined(CONFIG_MIPS_MT_SMTC)
+	set_c0_status(IE_IRQ0 | IE_IRQ1 | IE_IRQ2 |
+		IE_IRQ3 | IE_IRQ4 | IE_IRQ5);
+#else
+	set_c0_status(IE_SW0 | IE_SW1 | IE_IRQ0 | IE_IRQ1 |
+		IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5);
+#endif
+}
+
+unsigned int __cpuinit get_c0_compare_int(void)
+{
+	return CP0_LEGACY_COMPARE_IRQ;
+}
diff --git a/arch/mips/lantiq/machtypes.h b/arch/mips/lantiq/machtypes.h
new file mode 100644
index 00000000000..7e01b8c484e
--- /dev/null
+++ b/arch/mips/lantiq/machtypes.h
@@ -0,0 +1,20 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#ifndef _LANTIQ_MACH_H__
+#define _LANTIQ_MACH_H__
+
+#include <asm/mips_machine.h>
+
+enum lantiq_mach_type {
+	LTQ_MACH_GENERIC = 0,
+	LTQ_MACH_EASY50712,	/* Danube evaluation board */
+	LTQ_MACH_EASY50601,	/* Amazon SE evaluation board */
+};
+
+#endif
diff --git a/arch/mips/lantiq/prom.c b/arch/mips/lantiq/prom.c
new file mode 100644
index 00000000000..56ba007bf1e
--- /dev/null
+++ b/arch/mips/lantiq/prom.c
@@ -0,0 +1,71 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <asm/bootinfo.h>
+#include <asm/time.h>
+
+#include <lantiq.h>
+
+#include "prom.h"
+#include "clk.h"
+
+static struct ltq_soc_info soc_info;
+
+unsigned int ltq_get_cpu_ver(void)
+{
+	return soc_info.rev;
+}
+EXPORT_SYMBOL(ltq_get_cpu_ver);
+
+unsigned int ltq_get_soc_type(void)
+{
+	return soc_info.type;
+}
+EXPORT_SYMBOL(ltq_get_soc_type);
+
+const char *get_system_type(void)
+{
+	return soc_info.sys_type;
+}
+
+void prom_free_prom_memory(void)
+{
+}
+
+static void __init prom_init_cmdline(void)
+{
+	int argc = fw_arg0;
+	char **argv = (char **) KSEG1ADDR(fw_arg1);
+	int i;
+
+	for (i = 0; i < argc; i++) {
+		char *p = (char *)  KSEG1ADDR(argv[i]);
+
+		if (p && *p) {
+			strlcat(arcs_cmdline, p, sizeof(arcs_cmdline));
+			strlcat(arcs_cmdline, " ", sizeof(arcs_cmdline));
+		}
+	}
+}
+
+void __init prom_init(void)
+{
+	struct clk *clk;
+
+	ltq_soc_detect(&soc_info);
+	clk_init();
+	clk = clk_get(0, "cpu");
+	snprintf(soc_info.sys_type, LTQ_SYS_TYPE_LEN - 1, "%s rev1.%d",
+		soc_info.name, soc_info.rev);
+	clk_put(clk);
+	soc_info.sys_type[LTQ_SYS_TYPE_LEN - 1] = '\0';
+	pr_info("SoC: %s\n", soc_info.sys_type);
+	prom_init_cmdline();
+}
diff --git a/arch/mips/lantiq/prom.h b/arch/mips/lantiq/prom.h
new file mode 100644
index 00000000000..b4229d94280
--- /dev/null
+++ b/arch/mips/lantiq/prom.h
@@ -0,0 +1,25 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#ifndef _LTQ_PROM_H__
+#define _LTQ_PROM_H__
+
+#define LTQ_SYS_TYPE_LEN	0x100
+
+struct ltq_soc_info {
+	unsigned char *name;
+	unsigned int rev;
+	unsigned int partnum;
+	unsigned int type;
+	unsigned char sys_type[LTQ_SYS_TYPE_LEN];
+};
+
+extern void ltq_soc_detect(struct ltq_soc_info *i);
+extern void ltq_soc_setup(void);
+
+#endif
diff --git a/arch/mips/lantiq/setup.c b/arch/mips/lantiq/setup.c
new file mode 100644
index 00000000000..9b8af77ed0f
--- /dev/null
+++ b/arch/mips/lantiq/setup.c
@@ -0,0 +1,66 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <asm/bootinfo.h>
+
+#include <lantiq_soc.h>
+
+#include "machtypes.h"
+#include "devices.h"
+#include "prom.h"
+
+void __init plat_mem_setup(void)
+{
+	/* assume 16M as default incase uboot fails to pass proper ramsize */
+	unsigned long memsize = 16;
+	char **envp = (char **) KSEG1ADDR(fw_arg2);
+
+	ioport_resource.start = IOPORT_RESOURCE_START;
+	ioport_resource.end = IOPORT_RESOURCE_END;
+	iomem_resource.start = IOMEM_RESOURCE_START;
+	iomem_resource.end = IOMEM_RESOURCE_END;
+
+	set_io_port_base((unsigned long) KSEG1);
+
+	while (*envp) {
+		char *e = (char *)KSEG1ADDR(*envp);
+		if (!strncmp(e, "memsize=", 8)) {
+			e += 8;
+			if (strict_strtoul(e, 0, &memsize))
+				pr_warn("bad memsize specified\n");
+		}
+		envp++;
+	}
+	memsize *= 1024 * 1024;
+	add_memory_region(0x00000000, memsize, BOOT_MEM_RAM);
+}
+
+static int __init
+lantiq_setup(void)
+{
+	ltq_soc_setup();
+	mips_machine_setup();
+	return 0;
+}
+
+arch_initcall(lantiq_setup);
+
+static void __init
+lantiq_generic_init(void)
+{
+	/* Nothing to do */
+}
+
+MIPS_MACHINE(LTQ_MACH_GENERIC,
+	     "Generic",
+	     "Generic Lantiq based board",
+	     lantiq_generic_init);
diff --git a/arch/mips/lantiq/xway/Kconfig b/arch/mips/lantiq/xway/Kconfig
new file mode 100644
index 00000000000..2b857de3662
--- /dev/null
+++ b/arch/mips/lantiq/xway/Kconfig
@@ -0,0 +1,23 @@
+if SOC_XWAY
+
+menu "MIPS Machine"
+
+config LANTIQ_MACH_EASY50712
+	bool "Easy50712 - Danube"
+	default y
+
+endmenu
+
+endif
+
+if SOC_AMAZON_SE
+
+menu "MIPS Machine"
+
+config LANTIQ_MACH_EASY50601
+	bool "Easy50601 - Amazon SE"
+	default y
+
+endmenu
+
+endif
diff --git a/arch/mips/lantiq/xway/Makefile b/arch/mips/lantiq/xway/Makefile
new file mode 100644
index 00000000000..c517f2e7756
--- /dev/null
+++ b/arch/mips/lantiq/xway/Makefile
@@ -0,0 +1,7 @@
+obj-y := pmu.o ebu.o reset.o gpio.o gpio_stp.o gpio_ebu.o devices.o dma.o
+
+obj-$(CONFIG_SOC_XWAY) += clk-xway.o prom-xway.o setup-xway.o
+obj-$(CONFIG_SOC_AMAZON_SE) += clk-ase.o prom-ase.o setup-ase.o
+
+obj-$(CONFIG_LANTIQ_MACH_EASY50712) += mach-easy50712.o
+obj-$(CONFIG_LANTIQ_MACH_EASY50601) += mach-easy50601.o
diff --git a/arch/mips/lantiq/xway/clk-ase.c b/arch/mips/lantiq/xway/clk-ase.c
new file mode 100644
index 00000000000..22d823acd53
--- /dev/null
+++ b/arch/mips/lantiq/xway/clk-ase.c
@@ -0,0 +1,48 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2011 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+
+#include <asm/time.h>
+#include <asm/irq.h>
+#include <asm/div64.h>
+
+#include <lantiq_soc.h>
+
+/* cgu registers */
+#define LTQ_CGU_SYS	0x0010
+
+unsigned int ltq_get_io_region_clock(void)
+{
+	return CLOCK_133M;
+}
+EXPORT_SYMBOL(ltq_get_io_region_clock);
+
+unsigned int ltq_get_fpi_bus_clock(int fpi)
+{
+	return CLOCK_133M;
+}
+EXPORT_SYMBOL(ltq_get_fpi_bus_clock);
+
+unsigned int ltq_get_cpu_hz(void)
+{
+	if (ltq_cgu_r32(LTQ_CGU_SYS) & (1 << 5))
+		return CLOCK_266M;
+	else
+		return CLOCK_133M;
+}
+EXPORT_SYMBOL(ltq_get_cpu_hz);
+
+unsigned int ltq_get_fpi_hz(void)
+{
+	return CLOCK_133M;
+}
+EXPORT_SYMBOL(ltq_get_fpi_hz);
diff --git a/arch/mips/lantiq/xway/clk-xway.c b/arch/mips/lantiq/xway/clk-xway.c
new file mode 100644
index 00000000000..ddd39593c58
--- /dev/null
+++ b/arch/mips/lantiq/xway/clk-xway.c
@@ -0,0 +1,223 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+
+#include <asm/time.h>
+#include <asm/irq.h>
+#include <asm/div64.h>
+
+#include <lantiq_soc.h>
+
+static unsigned int ltq_ram_clocks[] = {
+	CLOCK_167M, CLOCK_133M, CLOCK_111M, CLOCK_83M };
+#define DDR_HZ ltq_ram_clocks[ltq_cgu_r32(LTQ_CGU_SYS) & 0x3]
+
+#define BASIC_FREQUENCY_1	35328000
+#define BASIC_FREQUENCY_2	36000000
+#define BASIS_REQUENCY_USB	12000000
+
+#define GET_BITS(x, msb, lsb) \
+	(((x) & ((1 << ((msb) + 1)) - 1)) >> (lsb))
+
+#define LTQ_CGU_PLL0_CFG	0x0004
+#define LTQ_CGU_PLL1_CFG	0x0008
+#define LTQ_CGU_PLL2_CFG	0x000C
+#define LTQ_CGU_SYS		0x0010
+#define LTQ_CGU_UPDATE		0x0014
+#define LTQ_CGU_IF_CLK		0x0018
+#define LTQ_CGU_OSC_CON		0x001C
+#define LTQ_CGU_SMD		0x0020
+#define LTQ_CGU_CT1SR		0x0028
+#define LTQ_CGU_CT2SR		0x002C
+#define LTQ_CGU_PCMCR		0x0030
+#define LTQ_CGU_PCI_CR		0x0034
+#define LTQ_CGU_PD_PC		0x0038
+#define LTQ_CGU_FMR		0x003C
+
+#define CGU_PLL0_PHASE_DIVIDER_ENABLE	\
+	(ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 31))
+#define CGU_PLL0_BYPASS			\
+	(ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 30))
+#define CGU_PLL0_CFG_DSMSEL		\
+	(ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 28))
+#define CGU_PLL0_CFG_FRAC_EN		\
+	(ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 27))
+#define CGU_PLL1_SRC			\
+	(ltq_cgu_r32(LTQ_CGU_PLL1_CFG) & (1 << 31))
+#define CGU_PLL2_PHASE_DIVIDER_ENABLE	\
+	(ltq_cgu_r32(LTQ_CGU_PLL2_CFG) & (1 << 20))
+#define CGU_SYS_FPI_SEL			(1 << 6)
+#define CGU_SYS_DDR_SEL			0x3
+#define CGU_PLL0_SRC			(1 << 29)
+
+#define CGU_PLL0_CFG_PLLK	GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL0_CFG), 26, 17)
+#define CGU_PLL0_CFG_PLLN	GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL0_CFG), 12, 6)
+#define CGU_PLL0_CFG_PLLM	GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL0_CFG), 5, 2)
+#define CGU_PLL2_SRC		GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL2_CFG), 18, 17)
+#define CGU_PLL2_CFG_INPUT_DIV	GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL2_CFG), 16, 13)
+
+static unsigned int ltq_get_pll0_fdiv(void);
+
+static inline unsigned int get_input_clock(int pll)
+{
+	switch (pll) {
+	case 0:
+		if (ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & CGU_PLL0_SRC)
+			return BASIS_REQUENCY_USB;
+		else if (CGU_PLL0_PHASE_DIVIDER_ENABLE)
+			return BASIC_FREQUENCY_1;
+		else
+			return BASIC_FREQUENCY_2;
+	case 1:
+		if (CGU_PLL1_SRC)
+			return BASIS_REQUENCY_USB;
+		else if (CGU_PLL0_PHASE_DIVIDER_ENABLE)
+			return BASIC_FREQUENCY_1;
+		else
+			return BASIC_FREQUENCY_2;
+	case 2:
+		switch (CGU_PLL2_SRC) {
+		case 0:
+			return ltq_get_pll0_fdiv();
+		case 1:
+			return CGU_PLL2_PHASE_DIVIDER_ENABLE ?
+				BASIC_FREQUENCY_1 :
+				BASIC_FREQUENCY_2;
+		case 2:
+			return BASIS_REQUENCY_USB;
+		}
+	default:
+		return 0;
+	}
+}
+
+static inline unsigned int cal_dsm(int pll, unsigned int num, unsigned int den)
+{
+	u64 res, clock = get_input_clock(pll);
+
+	res = num * clock;
+	do_div(res, den);
+	return res;
+}
+
+static inline unsigned int mash_dsm(int pll, unsigned int M, unsigned int N,
+	unsigned int K)
+{
+	unsigned int num = ((N + 1) << 10) + K;
+	unsigned int den = (M + 1) << 10;
+
+	return cal_dsm(pll, num, den);
+}
+
+static inline unsigned int ssff_dsm_1(int pll, unsigned int M, unsigned int N,
+	unsigned int K)
+{
+	unsigned int num = ((N + 1) << 11) + K + 512;
+	unsigned int den = (M + 1) << 11;
+
+	return cal_dsm(pll, num, den);
+}
+
+static inline unsigned int ssff_dsm_2(int pll, unsigned int M, unsigned int N,
+	unsigned int K)
+{
+	unsigned int num = K >= 512 ?
+		((N + 1) << 12) + K - 512 : ((N + 1) << 12) + K + 3584;
+	unsigned int den = (M + 1) << 12;
+
+	return cal_dsm(pll, num, den);
+}
+
+static inline unsigned int dsm(int pll, unsigned int M, unsigned int N,
+	unsigned int K, unsigned int dsmsel, unsigned int phase_div_en)
+{
+	if (!dsmsel)
+		return mash_dsm(pll, M, N, K);
+	else if (!phase_div_en)
+		return mash_dsm(pll, M, N, K);
+	else
+		return ssff_dsm_2(pll, M, N, K);
+}
+
+static inline unsigned int ltq_get_pll0_fosc(void)
+{
+	if (CGU_PLL0_BYPASS)
+		return get_input_clock(0);
+	else
+		return !CGU_PLL0_CFG_FRAC_EN
+			? dsm(0, CGU_PLL0_CFG_PLLM, CGU_PLL0_CFG_PLLN, 0,
+				CGU_PLL0_CFG_DSMSEL,
+				CGU_PLL0_PHASE_DIVIDER_ENABLE)
+			: dsm(0, CGU_PLL0_CFG_PLLM, CGU_PLL0_CFG_PLLN,
+				CGU_PLL0_CFG_PLLK, CGU_PLL0_CFG_DSMSEL,
+				CGU_PLL0_PHASE_DIVIDER_ENABLE);
+}
+
+static unsigned int ltq_get_pll0_fdiv(void)
+{
+	unsigned int div = CGU_PLL2_CFG_INPUT_DIV + 1;
+
+	return (ltq_get_pll0_fosc() + (div >> 1)) / div;
+}
+
+unsigned int ltq_get_io_region_clock(void)
+{
+	unsigned int ret = ltq_get_pll0_fosc();
+
+	switch (ltq_cgu_r32(LTQ_CGU_PLL2_CFG) & CGU_SYS_DDR_SEL) {
+	default:
+	case 0:
+		return (ret + 1) / 2;
+	case 1:
+		return (ret * 2 + 2) / 5;
+	case 2:
+		return (ret + 1) / 3;
+	case 3:
+		return (ret + 2) / 4;
+	}
+}
+EXPORT_SYMBOL(ltq_get_io_region_clock);
+
+unsigned int ltq_get_fpi_bus_clock(int fpi)
+{
+	unsigned int ret = ltq_get_io_region_clock();
+
+	if ((fpi == 2) && (ltq_cgu_r32(LTQ_CGU_SYS) & CGU_SYS_FPI_SEL))
+		ret >>= 1;
+	return ret;
+}
+EXPORT_SYMBOL(ltq_get_fpi_bus_clock);
+
+unsigned int ltq_get_cpu_hz(void)
+{
+	switch (ltq_cgu_r32(LTQ_CGU_SYS) & 0xc) {
+	case 0:
+		return CLOCK_333M;
+	case 4:
+		return DDR_HZ;
+	case 8:
+		return DDR_HZ << 1;
+	default:
+		return DDR_HZ >> 1;
+	}
+}
+EXPORT_SYMBOL(ltq_get_cpu_hz);
+
+unsigned int ltq_get_fpi_hz(void)
+{
+	unsigned int ddr_clock = DDR_HZ;
+
+	if (ltq_cgu_r32(LTQ_CGU_SYS) & 0x40)
+		return ddr_clock >> 1;
+	return ddr_clock;
+}
+EXPORT_SYMBOL(ltq_get_fpi_hz);
diff --git a/arch/mips/lantiq/xway/devices.c b/arch/mips/lantiq/xway/devices.c
new file mode 100644
index 00000000000..e09e789dfc2
--- /dev/null
+++ b/arch/mips/lantiq/xway/devices.c
@@ -0,0 +1,121 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/mtd/physmap.h>
+#include <linux/kernel.h>
+#include <linux/reboot.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/etherdevice.h>
+#include <linux/reboot.h>
+#include <linux/time.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+
+#include <asm/bootinfo.h>
+#include <asm/irq.h>
+
+#include <lantiq_soc.h>
+#include <lantiq_irq.h>
+#include <lantiq_platform.h>
+
+#include "devices.h"
+
+/* gpio */
+static struct resource ltq_gpio_resource[] = {
+	{
+		.name	= "gpio0",
+		.start  = LTQ_GPIO0_BASE_ADDR,
+		.end    = LTQ_GPIO0_BASE_ADDR + LTQ_GPIO_SIZE - 1,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.name	= "gpio1",
+		.start  = LTQ_GPIO1_BASE_ADDR,
+		.end    = LTQ_GPIO1_BASE_ADDR + LTQ_GPIO_SIZE - 1,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.name	= "gpio2",
+		.start  = LTQ_GPIO2_BASE_ADDR,
+		.end    = LTQ_GPIO2_BASE_ADDR + LTQ_GPIO_SIZE - 1,
+		.flags  = IORESOURCE_MEM,
+	}
+};
+
+void __init ltq_register_gpio(void)
+{
+	platform_device_register_simple("ltq_gpio", 0,
+		&ltq_gpio_resource[0], 1);
+	platform_device_register_simple("ltq_gpio", 1,
+		&ltq_gpio_resource[1], 1);
+
+	/* AR9 and VR9 have an extra gpio block */
+	if (ltq_is_ar9() || ltq_is_vr9()) {
+		platform_device_register_simple("ltq_gpio", 2,
+			&ltq_gpio_resource[2], 1);
+	}
+}
+
+/* serial to parallel conversion */
+static struct resource ltq_stp_resource = {
+	.name   = "stp",
+	.start  = LTQ_STP_BASE_ADDR,
+	.end    = LTQ_STP_BASE_ADDR + LTQ_STP_SIZE - 1,
+	.flags  = IORESOURCE_MEM,
+};
+
+void __init ltq_register_gpio_stp(void)
+{
+	platform_device_register_simple("ltq_stp", 0, &ltq_stp_resource, 1);
+}
+
+/* asc ports - amazon se has its own serial mapping */
+static struct resource ltq_ase_asc_resources[] = {
+	{
+		.name	= "asc0",
+		.start  = LTQ_ASC1_BASE_ADDR,
+		.end    = LTQ_ASC1_BASE_ADDR + LTQ_ASC_SIZE - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	IRQ_RES(tx, LTQ_ASC_ASE_TIR),
+	IRQ_RES(rx, LTQ_ASC_ASE_RIR),
+	IRQ_RES(err, LTQ_ASC_ASE_EIR),
+};
+
+void __init ltq_register_ase_asc(void)
+{
+	platform_device_register_simple("ltq_asc", 0,
+		ltq_ase_asc_resources, ARRAY_SIZE(ltq_ase_asc_resources));
+}
+
+/* ethernet */
+static struct resource ltq_etop_resources = {
+	.name	= "etop",
+	.start	= LTQ_ETOP_BASE_ADDR,
+	.end	= LTQ_ETOP_BASE_ADDR + LTQ_ETOP_SIZE - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device ltq_etop = {
+	.name		= "ltq_etop",
+	.resource	= &ltq_etop_resources,
+	.num_resources	= 1,
+};
+
+void __init
+ltq_register_etop(struct ltq_eth_data *eth)
+{
+	if (eth) {
+		ltq_etop.dev.platform_data = eth;
+		platform_device_register(&ltq_etop);
+	}
+}
diff --git a/arch/mips/lantiq/xway/devices.h b/arch/mips/lantiq/xway/devices.h
new file mode 100644
index 00000000000..e90493471bc
--- /dev/null
+++ b/arch/mips/lantiq/xway/devices.h
@@ -0,0 +1,20 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#ifndef _LTQ_DEVICES_XWAY_H__
+#define _LTQ_DEVICES_XWAY_H__
+
+#include "../devices.h"
+#include <linux/phy.h>
+
+extern void ltq_register_gpio(void);
+extern void ltq_register_gpio_stp(void);
+extern void ltq_register_ase_asc(void);
+extern void ltq_register_etop(struct ltq_eth_data *eth);
+
+#endif
diff --git a/arch/mips/lantiq/xway/dma.c b/arch/mips/lantiq/xway/dma.c
new file mode 100644
index 00000000000..4278a459d6c
--- /dev/null
+++ b/arch/mips/lantiq/xway/dma.c
@@ -0,0 +1,253 @@
+/*
+ *   This program is free software; you can redistribute it and/or modify it
+ *   under the terms of the GNU General Public License version 2 as published
+ *   by the Free Software Foundation.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ *   Copyright (C) 2011 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/dma-mapping.h>
+
+#include <lantiq_soc.h>
+#include <xway_dma.h>
+
+#define LTQ_DMA_CTRL		0x10
+#define LTQ_DMA_CPOLL		0x14
+#define LTQ_DMA_CS		0x18
+#define LTQ_DMA_CCTRL		0x1C
+#define LTQ_DMA_CDBA		0x20
+#define LTQ_DMA_CDLEN		0x24
+#define LTQ_DMA_CIS		0x28
+#define LTQ_DMA_CIE		0x2C
+#define LTQ_DMA_PS		0x40
+#define LTQ_DMA_PCTRL		0x44
+#define LTQ_DMA_IRNEN		0xf4
+
+#define DMA_DESCPT		BIT(3)		/* descriptor complete irq */
+#define DMA_TX			BIT(8)		/* TX channel direction */
+#define DMA_CHAN_ON		BIT(0)		/* channel on / off bit */
+#define DMA_PDEN		BIT(6)		/* enable packet drop */
+#define DMA_CHAN_RST		BIT(1)		/* channel on / off bit */
+#define DMA_RESET		BIT(0)		/* channel on / off bit */
+#define DMA_IRQ_ACK		0x7e		/* IRQ status register */
+#define DMA_POLL		BIT(31)		/* turn on channel polling */
+#define DMA_CLK_DIV4		BIT(6)		/* polling clock divider */
+#define DMA_2W_BURST		BIT(1)		/* 2 word burst length */
+#define DMA_MAX_CHANNEL		20		/* the soc has 20 channels */
+#define DMA_ETOP_ENDIANESS	(0xf << 8) /* endianess swap etop channels */
+#define DMA_WEIGHT	(BIT(17) | BIT(16))	/* default channel wheight */
+
+#define ltq_dma_r32(x)			ltq_r32(ltq_dma_membase + (x))
+#define ltq_dma_w32(x, y)		ltq_w32(x, ltq_dma_membase + (y))
+#define ltq_dma_w32_mask(x, y, z)	ltq_w32_mask(x, y, \
+						ltq_dma_membase + (z))
+
+static struct resource ltq_dma_resource = {
+	.name	= "dma",
+	.start	= LTQ_DMA_BASE_ADDR,
+	.end	= LTQ_DMA_BASE_ADDR + LTQ_DMA_SIZE - 1,
+	.flags  = IORESOURCE_MEM,
+};
+
+static void __iomem *ltq_dma_membase;
+
+void
+ltq_dma_enable_irq(struct ltq_dma_channel *ch)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	ltq_dma_w32(ch->nr, LTQ_DMA_CS);
+	ltq_dma_w32_mask(0, 1 << ch->nr, LTQ_DMA_IRNEN);
+	local_irq_restore(flags);
+}
+EXPORT_SYMBOL_GPL(ltq_dma_enable_irq);
+
+void
+ltq_dma_disable_irq(struct ltq_dma_channel *ch)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	ltq_dma_w32(ch->nr, LTQ_DMA_CS);
+	ltq_dma_w32_mask(1 << ch->nr, 0, LTQ_DMA_IRNEN);
+	local_irq_restore(flags);
+}
+EXPORT_SYMBOL_GPL(ltq_dma_disable_irq);
+
+void
+ltq_dma_ack_irq(struct ltq_dma_channel *ch)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	ltq_dma_w32(ch->nr, LTQ_DMA_CS);
+	ltq_dma_w32(DMA_IRQ_ACK, LTQ_DMA_CIS);
+	local_irq_restore(flags);
+}
+EXPORT_SYMBOL_GPL(ltq_dma_ack_irq);
+
+void
+ltq_dma_open(struct ltq_dma_channel *ch)
+{
+	unsigned long flag;
+
+	local_irq_save(flag);
+	ltq_dma_w32(ch->nr, LTQ_DMA_CS);
+	ltq_dma_w32_mask(0, DMA_CHAN_ON, LTQ_DMA_CCTRL);
+	ltq_dma_enable_irq(ch);
+	local_irq_restore(flag);
+}
+EXPORT_SYMBOL_GPL(ltq_dma_open);
+
+void
+ltq_dma_close(struct ltq_dma_channel *ch)
+{
+	unsigned long flag;
+
+	local_irq_save(flag);
+	ltq_dma_w32(ch->nr, LTQ_DMA_CS);
+	ltq_dma_w32_mask(DMA_CHAN_ON, 0, LTQ_DMA_CCTRL);
+	ltq_dma_disable_irq(ch);
+	local_irq_restore(flag);
+}
+EXPORT_SYMBOL_GPL(ltq_dma_close);
+
+static void
+ltq_dma_alloc(struct ltq_dma_channel *ch)
+{
+	unsigned long flags;
+
+	ch->desc = 0;
+	ch->desc_base = dma_alloc_coherent(NULL,
+				LTQ_DESC_NUM * LTQ_DESC_SIZE,
+				&ch->phys, GFP_ATOMIC);
+	memset(ch->desc_base, 0, LTQ_DESC_NUM * LTQ_DESC_SIZE);
+
+	local_irq_save(flags);
+	ltq_dma_w32(ch->nr, LTQ_DMA_CS);
+	ltq_dma_w32(ch->phys, LTQ_DMA_CDBA);
+	ltq_dma_w32(LTQ_DESC_NUM, LTQ_DMA_CDLEN);
+	ltq_dma_w32_mask(DMA_CHAN_ON, 0, LTQ_DMA_CCTRL);
+	wmb();
+	ltq_dma_w32_mask(0, DMA_CHAN_RST, LTQ_DMA_CCTRL);
+	while (ltq_dma_r32(LTQ_DMA_CCTRL) & DMA_CHAN_RST)
+		;
+	local_irq_restore(flags);
+}
+
+void
+ltq_dma_alloc_tx(struct ltq_dma_channel *ch)
+{
+	unsigned long flags;
+
+	ltq_dma_alloc(ch);
+
+	local_irq_save(flags);
+	ltq_dma_w32(DMA_DESCPT, LTQ_DMA_CIE);
+	ltq_dma_w32_mask(0, 1 << ch->nr, LTQ_DMA_IRNEN);
+	ltq_dma_w32(DMA_WEIGHT | DMA_TX, LTQ_DMA_CCTRL);
+	local_irq_restore(flags);
+}
+EXPORT_SYMBOL_GPL(ltq_dma_alloc_tx);
+
+void
+ltq_dma_alloc_rx(struct ltq_dma_channel *ch)
+{
+	unsigned long flags;
+
+	ltq_dma_alloc(ch);
+
+	local_irq_save(flags);
+	ltq_dma_w32(DMA_DESCPT, LTQ_DMA_CIE);
+	ltq_dma_w32_mask(0, 1 << ch->nr, LTQ_DMA_IRNEN);
+	ltq_dma_w32(DMA_WEIGHT, LTQ_DMA_CCTRL);
+	local_irq_restore(flags);
+}
+EXPORT_SYMBOL_GPL(ltq_dma_alloc_rx);
+
+void
+ltq_dma_free(struct ltq_dma_channel *ch)
+{
+	if (!ch->desc_base)
+		return;
+	ltq_dma_close(ch);
+	dma_free_coherent(NULL, LTQ_DESC_NUM * LTQ_DESC_SIZE,
+		ch->desc_base, ch->phys);
+}
+EXPORT_SYMBOL_GPL(ltq_dma_free);
+
+void
+ltq_dma_init_port(int p)
+{
+	ltq_dma_w32(p, LTQ_DMA_PS);
+	switch (p) {
+	case DMA_PORT_ETOP:
+		/*
+		 * Tell the DMA engine to swap the endianess of data frames and
+		 * drop packets if the channel arbitration fails.
+		 */
+		ltq_dma_w32_mask(0, DMA_ETOP_ENDIANESS | DMA_PDEN,
+			LTQ_DMA_PCTRL);
+		break;
+
+	case DMA_PORT_DEU:
+		ltq_dma_w32((DMA_2W_BURST << 4) | (DMA_2W_BURST << 2),
+			LTQ_DMA_PCTRL);
+		break;
+
+	default:
+		break;
+	}
+}
+EXPORT_SYMBOL_GPL(ltq_dma_init_port);
+
+int __init
+ltq_dma_init(void)
+{
+	int i;
+
+	/* insert and request the memory region */
+	if (insert_resource(&iomem_resource, &ltq_dma_resource) < 0)
+		panic("Failed to insert dma memory\n");
+
+	if (request_mem_region(ltq_dma_resource.start,
+			resource_size(&ltq_dma_resource), "dma") < 0)
+		panic("Failed to request dma memory\n");
+
+	/* remap dma register range */
+	ltq_dma_membase = ioremap_nocache(ltq_dma_resource.start,
+				resource_size(&ltq_dma_resource));
+	if (!ltq_dma_membase)
+		panic("Failed to remap dma memory\n");
+
+	/* power up and reset the dma engine */
+	ltq_pmu_enable(PMU_DMA);
+	ltq_dma_w32_mask(0, DMA_RESET, LTQ_DMA_CTRL);
+
+	/* disable all interrupts */
+	ltq_dma_w32(0, LTQ_DMA_IRNEN);
+
+	/* reset/configure each channel */
+	for (i = 0; i < DMA_MAX_CHANNEL; i++) {
+		ltq_dma_w32(i, LTQ_DMA_CS);
+		ltq_dma_w32(DMA_CHAN_RST, LTQ_DMA_CCTRL);
+		ltq_dma_w32(DMA_POLL | DMA_CLK_DIV4, LTQ_DMA_CPOLL);
+		ltq_dma_w32_mask(DMA_CHAN_ON, 0, LTQ_DMA_CCTRL);
+	}
+	return 0;
+}
+
+postcore_initcall(ltq_dma_init);
diff --git a/arch/mips/lantiq/xway/ebu.c b/arch/mips/lantiq/xway/ebu.c
new file mode 100644
index 00000000000..66eb52fa50a
--- /dev/null
+++ b/arch/mips/lantiq/xway/ebu.c
@@ -0,0 +1,53 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  EBU - the external bus unit attaches PCI, NOR and NAND
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/ioport.h>
+
+#include <lantiq_soc.h>
+
+/* all access to the ebu must be locked */
+DEFINE_SPINLOCK(ebu_lock);
+EXPORT_SYMBOL_GPL(ebu_lock);
+
+static struct resource ltq_ebu_resource = {
+	.name	= "ebu",
+	.start	= LTQ_EBU_BASE_ADDR,
+	.end	= LTQ_EBU_BASE_ADDR + LTQ_EBU_SIZE - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+/* remapped base addr of the clock unit and external bus unit */
+void __iomem *ltq_ebu_membase;
+
+static int __init lantiq_ebu_init(void)
+{
+	/* insert and request the memory region */
+	if (insert_resource(&iomem_resource, &ltq_ebu_resource) < 0)
+		panic("Failed to insert ebu memory\n");
+
+	if (request_mem_region(ltq_ebu_resource.start,
+			resource_size(&ltq_ebu_resource), "ebu") < 0)
+		panic("Failed to request ebu memory\n");
+
+	/* remap ebu register range */
+	ltq_ebu_membase = ioremap_nocache(ltq_ebu_resource.start,
+				resource_size(&ltq_ebu_resource));
+	if (!ltq_ebu_membase)
+		panic("Failed to remap ebu memory\n");
+
+	/* make sure to unprotect the memory region where flash is located */
+	ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_BUSCON0) & ~EBU_WRDIS, LTQ_EBU_BUSCON0);
+	return 0;
+}
+
+postcore_initcall(lantiq_ebu_init);
diff --git a/arch/mips/lantiq/xway/gpio.c b/arch/mips/lantiq/xway/gpio.c
new file mode 100644
index 00000000000..a321451a545
--- /dev/null
+++ b/arch/mips/lantiq/xway/gpio.c
@@ -0,0 +1,195 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+
+#include <lantiq_soc.h>
+
+#define LTQ_GPIO_OUT		0x00
+#define LTQ_GPIO_IN		0x04
+#define LTQ_GPIO_DIR		0x08
+#define LTQ_GPIO_ALTSEL0	0x0C
+#define LTQ_GPIO_ALTSEL1	0x10
+#define LTQ_GPIO_OD		0x14
+
+#define PINS_PER_PORT		16
+#define MAX_PORTS		3
+
+#define ltq_gpio_getbit(m, r, p)	(!!(ltq_r32(m + r) & (1 << p)))
+#define ltq_gpio_setbit(m, r, p)	ltq_w32_mask(0, (1 << p), m + r)
+#define ltq_gpio_clearbit(m, r, p)	ltq_w32_mask((1 << p), 0, m + r)
+
+struct ltq_gpio {
+	void __iomem *membase;
+	struct gpio_chip chip;
+};
+
+static struct ltq_gpio ltq_gpio_port[MAX_PORTS];
+
+int gpio_to_irq(unsigned int gpio)
+{
+	return -EINVAL;
+}
+EXPORT_SYMBOL(gpio_to_irq);
+
+int irq_to_gpio(unsigned int gpio)
+{
+	return -EINVAL;
+}
+EXPORT_SYMBOL(irq_to_gpio);
+
+int ltq_gpio_request(unsigned int pin, unsigned int alt0,
+	unsigned int alt1, unsigned int dir, const char *name)
+{
+	int id = 0;
+
+	if (pin >= (MAX_PORTS * PINS_PER_PORT))
+		return -EINVAL;
+	if (gpio_request(pin, name)) {
+		pr_err("failed to setup lantiq gpio: %s\n", name);
+		return -EBUSY;
+	}
+	if (dir)
+		gpio_direction_output(pin, 1);
+	else
+		gpio_direction_input(pin);
+	while (pin >= PINS_PER_PORT) {
+		pin -= PINS_PER_PORT;
+		id++;
+	}
+	if (alt0)
+		ltq_gpio_setbit(ltq_gpio_port[id].membase,
+			LTQ_GPIO_ALTSEL0, pin);
+	else
+		ltq_gpio_clearbit(ltq_gpio_port[id].membase,
+			LTQ_GPIO_ALTSEL0, pin);
+	if (alt1)
+		ltq_gpio_setbit(ltq_gpio_port[id].membase,
+			LTQ_GPIO_ALTSEL1, pin);
+	else
+		ltq_gpio_clearbit(ltq_gpio_port[id].membase,
+			LTQ_GPIO_ALTSEL1, pin);
+	return 0;
+}
+EXPORT_SYMBOL(ltq_gpio_request);
+
+static void ltq_gpio_set(struct gpio_chip *chip, unsigned int offset, int value)
+{
+	struct ltq_gpio *ltq_gpio = container_of(chip, struct ltq_gpio, chip);
+
+	if (value)
+		ltq_gpio_setbit(ltq_gpio->membase, LTQ_GPIO_OUT, offset);
+	else
+		ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_OUT, offset);
+}
+
+static int ltq_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+	struct ltq_gpio *ltq_gpio = container_of(chip, struct ltq_gpio, chip);
+
+	return ltq_gpio_getbit(ltq_gpio->membase, LTQ_GPIO_IN, offset);
+}
+
+static int ltq_gpio_direction_input(struct gpio_chip *chip, unsigned int offset)
+{
+	struct ltq_gpio *ltq_gpio = container_of(chip, struct ltq_gpio, chip);
+
+	ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_OD, offset);
+	ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_DIR, offset);
+
+	return 0;
+}
+
+static int ltq_gpio_direction_output(struct gpio_chip *chip,
+	unsigned int offset, int value)
+{
+	struct ltq_gpio *ltq_gpio = container_of(chip, struct ltq_gpio, chip);
+
+	ltq_gpio_setbit(ltq_gpio->membase, LTQ_GPIO_OD, offset);
+	ltq_gpio_setbit(ltq_gpio->membase, LTQ_GPIO_DIR, offset);
+	ltq_gpio_set(chip, offset, value);
+
+	return 0;
+}
+
+static int ltq_gpio_req(struct gpio_chip *chip, unsigned offset)
+{
+	struct ltq_gpio *ltq_gpio = container_of(chip, struct ltq_gpio, chip);
+
+	ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_ALTSEL0, offset);
+	ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_ALTSEL1, offset);
+	return 0;
+}
+
+static int ltq_gpio_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+
+	if (pdev->id >= MAX_PORTS) {
+		dev_err(&pdev->dev, "invalid gpio port %d\n",
+			pdev->id);
+		return -EINVAL;
+	}
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "failed to get memory for gpio port %d\n",
+			pdev->id);
+		return -ENOENT;
+	}
+	res = devm_request_mem_region(&pdev->dev, res->start,
+		resource_size(res), dev_name(&pdev->dev));
+	if (!res) {
+		dev_err(&pdev->dev,
+			"failed to request memory for gpio port %d\n",
+			pdev->id);
+		return -EBUSY;
+	}
+	ltq_gpio_port[pdev->id].membase = devm_ioremap_nocache(&pdev->dev,
+		res->start, resource_size(res));
+	if (!ltq_gpio_port[pdev->id].membase) {
+		dev_err(&pdev->dev, "failed to remap memory for gpio port %d\n",
+			pdev->id);
+		return -ENOMEM;
+	}
+	ltq_gpio_port[pdev->id].chip.label = "ltq_gpio";
+	ltq_gpio_port[pdev->id].chip.direction_input = ltq_gpio_direction_input;
+	ltq_gpio_port[pdev->id].chip.direction_output =
+		ltq_gpio_direction_output;
+	ltq_gpio_port[pdev->id].chip.get = ltq_gpio_get;
+	ltq_gpio_port[pdev->id].chip.set = ltq_gpio_set;
+	ltq_gpio_port[pdev->id].chip.request = ltq_gpio_req;
+	ltq_gpio_port[pdev->id].chip.base = PINS_PER_PORT * pdev->id;
+	ltq_gpio_port[pdev->id].chip.ngpio = PINS_PER_PORT;
+	platform_set_drvdata(pdev, &ltq_gpio_port[pdev->id]);
+	return gpiochip_add(&ltq_gpio_port[pdev->id].chip);
+}
+
+static struct platform_driver
+ltq_gpio_driver = {
+	.probe = ltq_gpio_probe,
+	.driver = {
+		.name = "ltq_gpio",
+		.owner = THIS_MODULE,
+	},
+};
+
+int __init ltq_gpio_init(void)
+{
+	int ret = platform_driver_register(&ltq_gpio_driver);
+
+	if (ret)
+		pr_info("ltq_gpio : Error registering platfom driver!");
+	return ret;
+}
+
+postcore_initcall(ltq_gpio_init);
diff --git a/arch/mips/lantiq/xway/gpio_ebu.c b/arch/mips/lantiq/xway/gpio_ebu.c
new file mode 100644
index 00000000000..a479355abdb
--- /dev/null
+++ b/arch/mips/lantiq/xway/gpio_ebu.c
@@ -0,0 +1,126 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+
+#include <lantiq_soc.h>
+
+/*
+ * By attaching hardware latches to the EBU it is possible to create output
+ * only gpios. This driver configures a special memory address, which when
+ * written to outputs 16 bit to the latches.
+ */
+
+#define LTQ_EBU_BUSCON	0x1e7ff		/* 16 bit access, slowest timing */
+#define LTQ_EBU_WP	0x80000000	/* write protect bit */
+
+/* we keep a shadow value of the last value written to the ebu */
+static int ltq_ebu_gpio_shadow = 0x0;
+static void __iomem *ltq_ebu_gpio_membase;
+
+static void ltq_ebu_apply(void)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&ebu_lock, flags);
+	ltq_ebu_w32(LTQ_EBU_BUSCON, LTQ_EBU_BUSCON1);
+	*((__u16 *)ltq_ebu_gpio_membase) = ltq_ebu_gpio_shadow;
+	ltq_ebu_w32(LTQ_EBU_BUSCON | LTQ_EBU_WP, LTQ_EBU_BUSCON1);
+	spin_unlock_irqrestore(&ebu_lock, flags);
+}
+
+static void ltq_ebu_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	if (value)
+		ltq_ebu_gpio_shadow |= (1 << offset);
+	else
+		ltq_ebu_gpio_shadow &= ~(1 << offset);
+	ltq_ebu_apply();
+}
+
+static int ltq_ebu_direction_output(struct gpio_chip *chip, unsigned offset,
+	int value)
+{
+	ltq_ebu_set(chip, offset, value);
+
+	return 0;
+}
+
+static struct gpio_chip ltq_ebu_chip = {
+	.label = "ltq_ebu",
+	.direction_output = ltq_ebu_direction_output,
+	.set = ltq_ebu_set,
+	.base = 72,
+	.ngpio = 16,
+	.can_sleep = 1,
+	.owner = THIS_MODULE,
+};
+
+static int ltq_ebu_probe(struct platform_device *pdev)
+{
+	int ret = 0;
+	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	if (!res) {
+		dev_err(&pdev->dev, "failed to get memory resource\n");
+		return -ENOENT;
+	}
+
+	res = devm_request_mem_region(&pdev->dev, res->start,
+		resource_size(res), dev_name(&pdev->dev));
+	if (!res) {
+		dev_err(&pdev->dev, "failed to request memory resource\n");
+		return -EBUSY;
+	}
+
+	ltq_ebu_gpio_membase = devm_ioremap_nocache(&pdev->dev, res->start,
+		resource_size(res));
+	if (!ltq_ebu_gpio_membase) {
+		dev_err(&pdev->dev, "Failed to ioremap mem region\n");
+		return -ENOMEM;
+	}
+
+	/* grab the default shadow value passed form the platform code */
+	ltq_ebu_gpio_shadow = (unsigned int) pdev->dev.platform_data;
+
+	/* tell the ebu controller which memory address we will be using */
+	ltq_ebu_w32(pdev->resource->start | 0x1, LTQ_EBU_ADDRSEL1);
+
+	/* write protect the region */
+	ltq_ebu_w32(LTQ_EBU_BUSCON | LTQ_EBU_WP, LTQ_EBU_BUSCON1);
+
+	ret = gpiochip_add(&ltq_ebu_chip);
+	if (!ret)
+		ltq_ebu_apply();
+	return ret;
+}
+
+static struct platform_driver ltq_ebu_driver = {
+	.probe = ltq_ebu_probe,
+	.driver = {
+		.name = "ltq_ebu",
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init ltq_ebu_init(void)
+{
+	int ret = platform_driver_register(&ltq_ebu_driver);
+
+	if (ret)
+		pr_info("ltq_ebu : Error registering platfom driver!");
+	return ret;
+}
+
+postcore_initcall(ltq_ebu_init);
diff --git a/arch/mips/lantiq/xway/gpio_stp.c b/arch/mips/lantiq/xway/gpio_stp.c
new file mode 100644
index 00000000000..67d59d69034
--- /dev/null
+++ b/arch/mips/lantiq/xway/gpio_stp.c
@@ -0,0 +1,157 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2007 John Crispin <blogic@openwrt.org>
+ *
+ */
+
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <lantiq_soc.h>
+
+#define LTQ_STP_CON0		0x00
+#define LTQ_STP_CON1		0x04
+#define LTQ_STP_CPU0		0x08
+#define LTQ_STP_CPU1		0x0C
+#define LTQ_STP_AR		0x10
+
+#define LTQ_STP_CON_SWU		(1 << 31)
+#define LTQ_STP_2HZ		0
+#define LTQ_STP_4HZ		(1 << 23)
+#define LTQ_STP_8HZ		(2 << 23)
+#define LTQ_STP_10HZ		(3 << 23)
+#define LTQ_STP_SPEED_MASK	(0xf << 23)
+#define LTQ_STP_UPD_FPI		(1 << 31)
+#define LTQ_STP_UPD_MASK	(3 << 30)
+#define LTQ_STP_ADSL_SRC	(3 << 24)
+
+#define LTQ_STP_GROUP0		(1 << 0)
+
+#define LTQ_STP_RISING		0
+#define LTQ_STP_FALLING		(1 << 26)
+#define LTQ_STP_EDGE_MASK	(1 << 26)
+
+#define ltq_stp_r32(reg)	__raw_readl(ltq_stp_membase + reg)
+#define ltq_stp_w32(val, reg)	__raw_writel(val, ltq_stp_membase + reg)
+#define ltq_stp_w32_mask(clear, set, reg) \
+		ltq_w32((ltq_r32(ltq_stp_membase + reg) & ~(clear)) | (set), \
+		ltq_stp_membase + (reg))
+
+static int ltq_stp_shadow = 0xffff;
+static void __iomem *ltq_stp_membase;
+
+static void ltq_stp_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	if (value)
+		ltq_stp_shadow |= (1 << offset);
+	else
+		ltq_stp_shadow &= ~(1 << offset);
+	ltq_stp_w32(ltq_stp_shadow, LTQ_STP_CPU0);
+}
+
+static int ltq_stp_direction_output(struct gpio_chip *chip, unsigned offset,
+	int value)
+{
+	ltq_stp_set(chip, offset, value);
+
+	return 0;
+}
+
+static struct gpio_chip ltq_stp_chip = {
+	.label = "ltq_stp",
+	.direction_output = ltq_stp_direction_output,
+	.set = ltq_stp_set,
+	.base = 48,
+	.ngpio = 24,
+	.can_sleep = 1,
+	.owner = THIS_MODULE,
+};
+
+static int ltq_stp_hw_init(void)
+{
+	/* the 3 pins used to control the external stp */
+	ltq_gpio_request(4, 1, 0, 1, "stp-st");
+	ltq_gpio_request(5, 1, 0, 1, "stp-d");
+	ltq_gpio_request(6, 1, 0, 1, "stp-sh");
+
+	/* sane defaults */
+	ltq_stp_w32(0, LTQ_STP_AR);
+	ltq_stp_w32(0, LTQ_STP_CPU0);
+	ltq_stp_w32(0, LTQ_STP_CPU1);
+	ltq_stp_w32(LTQ_STP_CON_SWU, LTQ_STP_CON0);
+	ltq_stp_w32(0, LTQ_STP_CON1);
+
+	/* rising or falling edge */
+	ltq_stp_w32_mask(LTQ_STP_EDGE_MASK, LTQ_STP_FALLING, LTQ_STP_CON0);
+
+	/* per default stp 15-0 are set */
+	ltq_stp_w32_mask(0, LTQ_STP_GROUP0, LTQ_STP_CON1);
+
+	/* stp are update periodically by the FPI bus */
+	ltq_stp_w32_mask(LTQ_STP_UPD_MASK, LTQ_STP_UPD_FPI, LTQ_STP_CON1);
+
+	/* set stp update speed */
+	ltq_stp_w32_mask(LTQ_STP_SPEED_MASK, LTQ_STP_8HZ, LTQ_STP_CON1);
+
+	/* tell the hardware that pin (led) 0 and 1 are controlled
+	 *  by the dsl arc
+	 */
+	ltq_stp_w32_mask(0, LTQ_STP_ADSL_SRC, LTQ_STP_CON0);
+
+	ltq_pmu_enable(PMU_LED);
+	return 0;
+}
+
+static int __devinit ltq_stp_probe(struct platform_device *pdev)
+{
+	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	int ret = 0;
+
+	if (!res)
+		return -ENOENT;
+	res = devm_request_mem_region(&pdev->dev, res->start,
+		resource_size(res), dev_name(&pdev->dev));
+	if (!res) {
+		dev_err(&pdev->dev, "failed to request STP memory\n");
+		return -EBUSY;
+	}
+	ltq_stp_membase = devm_ioremap_nocache(&pdev->dev, res->start,
+		resource_size(res));
+	if (!ltq_stp_membase) {
+		dev_err(&pdev->dev, "failed to remap STP memory\n");
+		return -ENOMEM;
+	}
+	ret = gpiochip_add(&ltq_stp_chip);
+	if (!ret)
+		ret = ltq_stp_hw_init();
+
+	return ret;
+}
+
+static struct platform_driver ltq_stp_driver = {
+	.probe = ltq_stp_probe,
+	.driver = {
+		.name = "ltq_stp",
+		.owner = THIS_MODULE,
+	},
+};
+
+int __init ltq_stp_init(void)
+{
+	int ret = platform_driver_register(&ltq_stp_driver);
+
+	if (ret)
+		pr_info("ltq_stp: error registering platfom driver");
+	return ret;
+}
+
+postcore_initcall(ltq_stp_init);
diff --git a/arch/mips/lantiq/xway/mach-easy50601.c b/arch/mips/lantiq/xway/mach-easy50601.c
new file mode 100644
index 00000000000..d5aaf637ab1
--- /dev/null
+++ b/arch/mips/lantiq/xway/mach-easy50601.c
@@ -0,0 +1,57 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/input.h>
+
+#include <lantiq.h>
+
+#include "../machtypes.h"
+#include "devices.h"
+
+static struct mtd_partition easy50601_partitions[] = {
+	{
+		.name	= "uboot",
+		.offset	= 0x0,
+		.size	= 0x10000,
+	},
+	{
+		.name	= "uboot_env",
+		.offset	= 0x10000,
+		.size	= 0x10000,
+	},
+	{
+		.name	= "linux",
+		.offset	= 0x20000,
+		.size	= 0xE0000,
+	},
+	{
+		.name	= "rootfs",
+		.offset	= 0x100000,
+		.size	= 0x300000,
+	},
+};
+
+static struct physmap_flash_data easy50601_flash_data = {
+	.nr_parts	= ARRAY_SIZE(easy50601_partitions),
+	.parts		= easy50601_partitions,
+};
+
+static void __init easy50601_init(void)
+{
+	ltq_register_nor(&easy50601_flash_data);
+}
+
+MIPS_MACHINE(LTQ_MACH_EASY50601,
+			"EASY50601",
+			"EASY50601 Eval Board",
+			easy50601_init);
diff --git a/arch/mips/lantiq/xway/mach-easy50712.c b/arch/mips/lantiq/xway/mach-easy50712.c
new file mode 100644
index 00000000000..ea5027b3239
--- /dev/null
+++ b/arch/mips/lantiq/xway/mach-easy50712.c
@@ -0,0 +1,74 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/input.h>
+#include <linux/phy.h>
+
+#include <lantiq_soc.h>
+#include <irq.h>
+
+#include "../machtypes.h"
+#include "devices.h"
+
+static struct mtd_partition easy50712_partitions[] = {
+	{
+		.name	= "uboot",
+		.offset	= 0x0,
+		.size	= 0x10000,
+	},
+	{
+		.name	= "uboot_env",
+		.offset	= 0x10000,
+		.size	= 0x10000,
+	},
+	{
+		.name	= "linux",
+		.offset	= 0x20000,
+		.size	= 0xe0000,
+	},
+	{
+		.name	= "rootfs",
+		.offset	= 0x100000,
+		.size	= 0x300000,
+	},
+};
+
+static struct physmap_flash_data easy50712_flash_data = {
+	.nr_parts	= ARRAY_SIZE(easy50712_partitions),
+	.parts		= easy50712_partitions,
+};
+
+static struct ltq_pci_data ltq_pci_data = {
+	.clock	= PCI_CLOCK_INT,
+	.gpio	= PCI_GNT1 | PCI_REQ1,
+	.irq	= {
+		[14] = INT_NUM_IM0_IRL0 + 22,
+	},
+};
+
+static struct ltq_eth_data ltq_eth_data = {
+	.mii_mode = PHY_INTERFACE_MODE_MII,
+};
+
+static void __init easy50712_init(void)
+{
+	ltq_register_gpio_stp();
+	ltq_register_nor(&easy50712_flash_data);
+	ltq_register_pci(&ltq_pci_data);
+	ltq_register_etop(&ltq_eth_data);
+}
+
+MIPS_MACHINE(LTQ_MACH_EASY50712,
+	     "EASY50712",
+	     "EASY50712 Eval Board",
+	      easy50712_init);
diff --git a/arch/mips/lantiq/xway/pmu.c b/arch/mips/lantiq/xway/pmu.c
new file mode 100644
index 00000000000..9d69f01e352
--- /dev/null
+++ b/arch/mips/lantiq/xway/pmu.c
@@ -0,0 +1,70 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/ioport.h>
+
+#include <lantiq_soc.h>
+
+/* PMU - the power management unit allows us to turn part of the core
+ * on and off
+ */
+
+/* the enable / disable registers */
+#define LTQ_PMU_PWDCR	0x1C
+#define LTQ_PMU_PWDSR	0x20
+
+#define ltq_pmu_w32(x, y)	ltq_w32((x), ltq_pmu_membase + (y))
+#define ltq_pmu_r32(x)		ltq_r32(ltq_pmu_membase + (x))
+
+static struct resource ltq_pmu_resource = {
+	.name	= "pmu",
+	.start	= LTQ_PMU_BASE_ADDR,
+	.end	= LTQ_PMU_BASE_ADDR + LTQ_PMU_SIZE - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static void __iomem *ltq_pmu_membase;
+
+void ltq_pmu_enable(unsigned int module)
+{
+	int err = 1000000;
+
+	ltq_pmu_w32(ltq_pmu_r32(LTQ_PMU_PWDCR) & ~module, LTQ_PMU_PWDCR);
+	do {} while (--err && (ltq_pmu_r32(LTQ_PMU_PWDSR) & module));
+
+	if (!err)
+		panic("activating PMU module failed!\n");
+}
+EXPORT_SYMBOL(ltq_pmu_enable);
+
+void ltq_pmu_disable(unsigned int module)
+{
+	ltq_pmu_w32(ltq_pmu_r32(LTQ_PMU_PWDCR) | module, LTQ_PMU_PWDCR);
+}
+EXPORT_SYMBOL(ltq_pmu_disable);
+
+int __init ltq_pmu_init(void)
+{
+	if (insert_resource(&iomem_resource, &ltq_pmu_resource) < 0)
+		panic("Failed to insert pmu memory\n");
+
+	if (request_mem_region(ltq_pmu_resource.start,
+			resource_size(&ltq_pmu_resource), "pmu") < 0)
+		panic("Failed to request pmu memory\n");
+
+	ltq_pmu_membase = ioremap_nocache(ltq_pmu_resource.start,
+				resource_size(&ltq_pmu_resource));
+	if (!ltq_pmu_membase)
+		panic("Failed to remap pmu memory\n");
+	return 0;
+}
+
+core_initcall(ltq_pmu_init);
diff --git a/arch/mips/lantiq/xway/prom-ase.c b/arch/mips/lantiq/xway/prom-ase.c
new file mode 100644
index 00000000000..abe49f4db57
--- /dev/null
+++ b/arch/mips/lantiq/xway/prom-ase.c
@@ -0,0 +1,39 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <asm/bootinfo.h>
+#include <asm/time.h>
+
+#include <lantiq_soc.h>
+
+#include "../prom.h"
+
+#define SOC_AMAZON_SE	"Amazon_SE"
+
+#define PART_SHIFT	12
+#define PART_MASK	0x0FFFFFFF
+#define REV_SHIFT	28
+#define REV_MASK	0xF0000000
+
+void __init ltq_soc_detect(struct ltq_soc_info *i)
+{
+	i->partnum = (ltq_r32(LTQ_MPS_CHIPID) & PART_MASK) >> PART_SHIFT;
+	i->rev = (ltq_r32(LTQ_MPS_CHIPID) & REV_MASK) >> REV_SHIFT;
+	switch (i->partnum) {
+	case SOC_ID_AMAZON_SE:
+		i->name = SOC_AMAZON_SE;
+		i->type = SOC_TYPE_AMAZON_SE;
+		break;
+
+	default:
+		unreachable();
+		break;
+	}
+}
diff --git a/arch/mips/lantiq/xway/prom-xway.c b/arch/mips/lantiq/xway/prom-xway.c
new file mode 100644
index 00000000000..1686692ac24
--- /dev/null
+++ b/arch/mips/lantiq/xway/prom-xway.c
@@ -0,0 +1,54 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <asm/bootinfo.h>
+#include <asm/time.h>
+
+#include <lantiq_soc.h>
+
+#include "../prom.h"
+
+#define SOC_DANUBE	"Danube"
+#define SOC_TWINPASS	"Twinpass"
+#define SOC_AR9		"AR9"
+
+#define PART_SHIFT	12
+#define PART_MASK	0x0FFFFFFF
+#define REV_SHIFT	28
+#define REV_MASK	0xF0000000
+
+void __init ltq_soc_detect(struct ltq_soc_info *i)
+{
+	i->partnum = (ltq_r32(LTQ_MPS_CHIPID) & PART_MASK) >> PART_SHIFT;
+	i->rev = (ltq_r32(LTQ_MPS_CHIPID) & REV_MASK) >> REV_SHIFT;
+	switch (i->partnum) {
+	case SOC_ID_DANUBE1:
+	case SOC_ID_DANUBE2:
+		i->name = SOC_DANUBE;
+		i->type = SOC_TYPE_DANUBE;
+		break;
+
+	case SOC_ID_TWINPASS:
+		i->name = SOC_TWINPASS;
+		i->type = SOC_TYPE_DANUBE;
+		break;
+
+	case SOC_ID_ARX188:
+	case SOC_ID_ARX168:
+	case SOC_ID_ARX182:
+		i->name = SOC_AR9;
+		i->type = SOC_TYPE_AR9;
+		break;
+
+	default:
+		unreachable();
+		break;
+	}
+}
diff --git a/arch/mips/lantiq/xway/reset.c b/arch/mips/lantiq/xway/reset.c
new file mode 100644
index 00000000000..a1be36d0e49
--- /dev/null
+++ b/arch/mips/lantiq/xway/reset.c
@@ -0,0 +1,91 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/pm.h>
+#include <linux/module.h>
+#include <asm/reboot.h>
+
+#include <lantiq_soc.h>
+
+#define ltq_rcu_w32(x, y)	ltq_w32((x), ltq_rcu_membase + (y))
+#define ltq_rcu_r32(x)		ltq_r32(ltq_rcu_membase + (x))
+
+/* register definitions */
+#define LTQ_RCU_RST		0x0010
+#define LTQ_RCU_RST_ALL		0x40000000
+
+#define LTQ_RCU_RST_STAT	0x0014
+#define LTQ_RCU_STAT_SHIFT	26
+
+static struct resource ltq_rcu_resource = {
+	.name   = "rcu",
+	.start  = LTQ_RCU_BASE_ADDR,
+	.end    = LTQ_RCU_BASE_ADDR + LTQ_RCU_SIZE - 1,
+	.flags  = IORESOURCE_MEM,
+};
+
+/* remapped base addr of the reset control unit */
+static void __iomem *ltq_rcu_membase;
+
+/* This function is used by the watchdog driver */
+int ltq_reset_cause(void)
+{
+	u32 val = ltq_rcu_r32(LTQ_RCU_RST_STAT);
+	return val >> LTQ_RCU_STAT_SHIFT;
+}
+EXPORT_SYMBOL_GPL(ltq_reset_cause);
+
+static void ltq_machine_restart(char *command)
+{
+	pr_notice("System restart\n");
+	local_irq_disable();
+	ltq_rcu_w32(ltq_rcu_r32(LTQ_RCU_RST) | LTQ_RCU_RST_ALL, LTQ_RCU_RST);
+	unreachable();
+}
+
+static void ltq_machine_halt(void)
+{
+	pr_notice("System halted.\n");
+	local_irq_disable();
+	unreachable();
+}
+
+static void ltq_machine_power_off(void)
+{
+	pr_notice("Please turn off the power now.\n");
+	local_irq_disable();
+	unreachable();
+}
+
+static int __init mips_reboot_setup(void)
+{
+	/* insert and request the memory region */
+	if (insert_resource(&iomem_resource, &ltq_rcu_resource) < 0)
+		panic("Failed to insert rcu memory\n");
+
+	if (request_mem_region(ltq_rcu_resource.start,
+			resource_size(&ltq_rcu_resource), "rcu") < 0)
+		panic("Failed to request rcu memory\n");
+
+	/* remap rcu register range */
+	ltq_rcu_membase = ioremap_nocache(ltq_rcu_resource.start,
+				resource_size(&ltq_rcu_resource));
+	if (!ltq_rcu_membase)
+		panic("Failed to remap rcu memory\n");
+
+	_machine_restart = ltq_machine_restart;
+	_machine_halt = ltq_machine_halt;
+	pm_power_off = ltq_machine_power_off;
+
+	return 0;
+}
+
+arch_initcall(mips_reboot_setup);
diff --git a/arch/mips/lantiq/xway/setup-ase.c b/arch/mips/lantiq/xway/setup-ase.c
new file mode 100644
index 00000000000..f6f326798a3
--- /dev/null
+++ b/arch/mips/lantiq/xway/setup-ase.c
@@ -0,0 +1,19 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2011 John Crispin <blogic@openwrt.org>
+ */
+
+#include <lantiq_soc.h>
+
+#include "../prom.h"
+#include "devices.h"
+
+void __init ltq_soc_setup(void)
+{
+	ltq_register_ase_asc();
+	ltq_register_gpio();
+	ltq_register_wdt();
+}
diff --git a/arch/mips/lantiq/xway/setup-xway.c b/arch/mips/lantiq/xway/setup-xway.c
new file mode 100644
index 00000000000..c292f643a85
--- /dev/null
+++ b/arch/mips/lantiq/xway/setup-xway.c
@@ -0,0 +1,20 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2011 John Crispin <blogic@openwrt.org>
+ */
+
+#include <lantiq_soc.h>
+
+#include "../prom.h"
+#include "devices.h"
+
+void __init ltq_soc_setup(void)
+{
+	ltq_register_asc(0);
+	ltq_register_asc(1);
+	ltq_register_gpio();
+	ltq_register_wdt();
+}