MIPS FPU emulator: allow Cause bits of FCSR to be writeable by ctc1

    
    In the FPU emulator code of the MIPS, the Cause bits of the FCSR register
    are not currently writeable by the ctc1 instruction.  In odd corner cases,
    this can cause problems.  For example, a case existed where a divide-by-zero
    exception was generated by the FPU, and the signal handler attempted to
    restore the FPU registers to their state before the exception occurred.  In
    this particular setup, writing the old value to the FCSR register would
    cause another divide-by-zero exception to occur immediately.  The solution
    is to change the ctc1 instruction emulator code to allow the Cause bits of
    the FCSR register to be writeable.  This is the behaviour of the hardware
    that the code is emulating.
    
    This problem was found by Shane McDonald, but the credit for the fix goes
    to Kevin Kissell.  In Kevin's words:
    
    I submit that the bug is indeed in that ctc_op:  case of the emulator.  The
    Cause bits (17:12) are supposed to be writable by that instruction, but the
    CTC1 emulation won't let them be updated by the instruction.  I think that
    actually if you just completely removed lines 387-388 [...] things would
    work a good deal better.  At least, it would be a more accurate emulation of
    the architecturally defined FPU.  If I wanted to be really, really pedantic
    (which I sometimes do), I'd also protect the reserved bits that aren't
    necessarily writable.
    
    Signed-off-by: Shane McDonald <mcdonald.shane@gmail.com>
    To: anemo@mba.ocn.ne.jp
    To: kevink@paralogos.com
    To: sshtylyov@mvista.com
    Patchwork: http://patchwork.linux-mips.org/patch/1205/
    Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

---

1 files changed, 11 insertions, 4 deletions

diff --git a/arch/mips/math-emu/cp1emu.c b/arch/mips/math-emu/cp1emu.c
index 8f2f8e9d8b2..f2338d1c0b4 100644
--- a/arch/mips/math-emu/cp1emu.c
+++ b/arch/mips/math-emu/cp1emu.c
@@ -78,6 +78,9 @@ DEFINE_PER_CPU(struct mips_fpu_emulator_stats, fpuemustats);
 #define FPCREG_RID	0	/* $0  = revision id */
 #define FPCREG_CSR	31	/* $31 = csr */
 
+/* Determine rounding mode from the RM bits of the FCSR */
+#define modeindex(v) ((v) & FPU_CSR_RM)
+
 /* Convert Mips rounding mode (0..3) to IEEE library modes. */
 static const unsigned char ieee_rm[4] = {
 	[FPU_CSR_RN] = IEEE754_RN,
@@ -384,10 +387,14 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx)
 					(void *) (xcp->cp0_epc),
 					MIPSInst_RT(ir), value);
 #endif
-				value &= (FPU_CSR_FLUSH | FPU_CSR_ALL_E | FPU_CSR_ALL_S | 0x03);
-				ctx->fcr31 &= ~(FPU_CSR_FLUSH | FPU_CSR_ALL_E | FPU_CSR_ALL_S | 0x03);
-				/* convert to ieee library modes */
-				ctx->fcr31 |= (value & ~0x3) | ieee_rm[value & 0x3];
+
+				/*
+				 * Don't write reserved bits,
+				 * and convert to ieee library modes
+				 */
+				ctx->fcr31 = (value &
+						~(FPU_CSR_RSVD | FPU_CSR_RM)) |
+						ieee_rm[modeindex(value)];
 			}
 			if ((ctx->fcr31 >> 5) & ctx->fcr31 & FPU_CSR_ALL_E) {
 				return SIGFPE;