Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus

* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: (46 commits)
  ftrace/MIPS: Enable C Version of recordmcount
  ftrace/MIPS: Add module support for C version of recordmcount
  ftrace/MIPS: Add MIPS64 support for C version of recordmcount
  MIPS: Make TASK_SIZE reflect proper size for both 32 and 64 bit processes.
  MIPS: Allow UserLocal on MIPS_R1 processors
  MIPS: Honor L2 bypass bit
  MIPS: Add BMIPS CP0 register definitions
  MIPS: Add BMIPS processor types to Kconfig
  MIPS: Decouple BMIPS CPU support from bcm47xx/bcm63xx SoC code
  MIPS: Add support for hardware performance events (mipsxx)
  MIPS: Perf-events: Add callchain support
  MIPS: add support for hardware performance events (skeleton)
  MIPS: add support for software performance events
  MIPS: define local_xchg from xchg_local to atomic_long_xchg
  MIPS: AR7: Add support for Titan (TNETV10xx) SoC variant
  MIPS: AR7: Initialize GPIO earlier
  MIPS: Add platform device and Kconfig for Octeon USB EHCI / OHCI
  USB: Add EHCI and OHCH glue for OCTEON II SOCs.
  MIPS: Octeon: Add register definitions for EHCI / OHCI USB glue logic.
  MIPS: Octeon: Apply CN63XXP1 errata workarounds.
  ...

1 files changed, 30 insertions, 4 deletions

diff --git a/arch/mips/mm/sc-mips.c b/arch/mips/mm/sc-mips.c
index 5ab5fa8c1d8..505fecad468 100644
--- a/arch/mips/mm/sc-mips.c
+++ b/arch/mips/mm/sc-mips.c
@@ -57,6 +57,34 @@ static struct bcache_ops mips_sc_ops = {
 	.bc_inv = mips_sc_inv
 };
 
+/*
+ * Check if the L2 cache controller is activated on a particular platform.
+ * MTI's L2 controller and the L2 cache controller of Broadcom's BMIPS
+ * cores both use c0_config2's bit 12 as "L2 Bypass" bit, that is the
+ * cache being disabled.  However there is no guarantee for this to be
+ * true on all platforms.  In an act of stupidity the spec defined bits
+ * 12..15 as implementation defined so below function will eventually have
+ * to be replaced by a platform specific probe.
+ */
+static inline int mips_sc_is_activated(struct cpuinfo_mips *c)
+{
+	/* Check the bypass bit (L2B) */
+	switch (c->cputype) {
+	case CPU_34K:
+	case CPU_74K:
+	case CPU_1004K:
+	case CPU_BMIPS5000:
+		if (config2 & (1 << 12))
+			return 0;
+	}
+
+	tmp = (config2 >> 4) & 0x0f;
+	if (0 < tmp && tmp <= 7)
+		c->scache.linesz = 2 << tmp;
+	else
+		return 0;
+}
+
 static inline int __init mips_sc_probe(void)
 {
 	struct cpuinfo_mips *c = &current_cpu_data;
@@ -79,10 +107,8 @@ static inline int __init mips_sc_probe(void)
 		return 0;
 
 	config2 = read_c0_config2();
-	tmp = (config2 >> 4) & 0x0f;
-	if (0 < tmp && tmp <= 7)
-		c->scache.linesz = 2 << tmp;
-	else
+
+	if (!mips_sc_is_activated(c))
 		return 0;
 
 	tmp = (config2 >> 8) & 0x0f;