Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:
 "This is an unusually large pull request for MIPS - in parts because
  lots of patches missed the 3.18 deadline but primarily because some
  folks opened the flood gates.

   - Retire the MIPS-specific phys_t with the generic phys_addr_t.
   - Improvments for the backtrace code used by oprofile.
   - Better backtraces on SMP systems.
   - Cleanups for the Octeon platform code.
   - Cleanups and fixes for the Loongson platform code.
   - Cleanups and fixes to the firmware library.
   - Switch ATH79 platform to use the firmware library.
   - Grand overhault to the SEAD3 and Malta interrupt code.
   - Move the GIC interrupt code to drivers/irqchip
   - Lots of GIC cleanups and updates to the GIC code to use modern IRQ
     infrastructures and features of the kernel.
   - OF documentation updates for the GIC bindings
   - Move GIC clocksource driver to drivers/clocksource
   - Merge GIC clocksource driver with clockevent driver.
   - Further updates to bring the GIC clocksource driver up to date.
   - R3000 TLB code cleanups
   - Improvments to the Loongson 3 platform code.
   - Convert pr_warning to pr_warn.
   - Merge a bunch of small lantiq and ralink fixes that have been
     staged/lingering inside the openwrt tree for a while.
   - Update archhelp for IP22/IP32
   - Fix a number of issues for Loongson 1B.
   - New clocksource and clockevent driver for Loongson 1B.
   - Further work on clk handling for Loongson 1B.
   - Platform work for Broadcom BMIPS.
   - Error handling cleanups for TurboChannel.
   - Fixes and optimization to the microMIPS support.
   - Option to disable the FTLB.
   - Dump more relevant information on machine check exception
   - Change binfmt to allow arch to examine PT_*PROC headers
   - Support for new style FPU register model in O32
   - VDSO randomization.
   - BCM47xx cleanups
   - BCM47xx reimplement the way the kernel accesses NVRAM information.
   - Random cleanups
   - Add support for ATH25 platforms
   - Remove pointless locking code in some PCI platforms.
   - Some improvments to EVA support
   - Minor Alchemy cleanup"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (185 commits)
  MIPS: Add MFHC0 and MTHC0 instructions to uasm.
  MIPS: Cosmetic cleanups of page table headers.
  MIPS: Add CP0 macros for extended EntryLo registers
  MIPS: Remove now unused definition of phys_t.
  MIPS: Replace use of phys_t with phys_addr_t.
  MIPS: Replace MIPS-specific 64BIT_PHYS_ADDR with generic PHYS_ADDR_T_64BIT
  PCMCIA: Alchemy Don't select 64BIT_PHYS_ADDR in Kconfig.
  MIPS: lib: memset: Clean up some MIPS{EL,EB} ifdefery
  MIPS: iomap: Use __mem_{read,write}{b,w,l} for MMIO
  MIPS: <asm/types.h> fix indentation.
  MAINTAINERS: Add entry for BMIPS multiplatform kernel
  MIPS: Enable VDSO randomization
  MIPS: Remove a temporary hack for debugging cache flushes in SMTC configuration
  MIPS: Remove declaration of obsolete arch_init_clk_ops()
  MIPS: atomic.h: Reformat to fit in 79 columns
  MIPS: Apply `.insn' to fixup labels throughout
  MIPS: Fix microMIPS LL/SC immediate offsets
  MIPS: Kconfig: Only allow 32-bit microMIPS builds
  MIPS: signal.c: Fix an invalid cast in ISA mode bit handling
  MIPS: mm: Only build one microassembler that is suitable
  ...

1 files changed, 9 insertions, 9 deletions

diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index e3328a96e80..3978a3d8136 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -637,7 +637,7 @@ static __maybe_unused void build_convert_pte_to_entrylo(u32 **p,
 	if (cpu_has_rixi) {
 		UASM_i_ROTR(p, reg, reg, ilog2(_PAGE_GLOBAL));
 	} else {
-#ifdef CONFIG_64BIT_PHYS_ADDR
+#ifdef CONFIG_PHYS_ADDR_T_64BIT
 		uasm_i_dsrl_safe(p, reg, reg, ilog2(_PAGE_GLOBAL));
 #else
 		UASM_i_SRL(p, reg, reg, ilog2(_PAGE_GLOBAL));
@@ -1009,7 +1009,7 @@ static void build_update_entries(u32 **p, unsigned int tmp, unsigned int ptep)
 	 * 64bit address support (36bit on a 32bit CPU) in a 32bit
 	 * Kernel is a special case. Only a few CPUs use it.
 	 */
-#ifdef CONFIG_64BIT_PHYS_ADDR
+#ifdef CONFIG_PHYS_ADDR_T_64BIT
 	if (cpu_has_64bits) {
 		uasm_i_ld(p, tmp, 0, ptep); /* get even pte */
 		uasm_i_ld(p, ptep, sizeof(pte_t), ptep); /* get odd pte */
@@ -1510,14 +1510,14 @@ static void
 iPTE_LW(u32 **p, unsigned int pte, unsigned int ptr)
 {
 #ifdef CONFIG_SMP
-# ifdef CONFIG_64BIT_PHYS_ADDR
+# ifdef CONFIG_PHYS_ADDR_T_64BIT
 	if (cpu_has_64bits)
 		uasm_i_lld(p, pte, 0, ptr);
 	else
 # endif
 		UASM_i_LL(p, pte, 0, ptr);
 #else
-# ifdef CONFIG_64BIT_PHYS_ADDR
+# ifdef CONFIG_PHYS_ADDR_T_64BIT
 	if (cpu_has_64bits)
 		uasm_i_ld(p, pte, 0, ptr);
 	else
@@ -1530,13 +1530,13 @@ static void
 iPTE_SW(u32 **p, struct uasm_reloc **r, unsigned int pte, unsigned int ptr,
 	unsigned int mode)
 {
-#ifdef CONFIG_64BIT_PHYS_ADDR
+#ifdef CONFIG_PHYS_ADDR_T_64BIT
 	unsigned int hwmode = mode & (_PAGE_VALID | _PAGE_DIRTY);
 #endif
 
 	uasm_i_ori(p, pte, pte, mode);
 #ifdef CONFIG_SMP
-# ifdef CONFIG_64BIT_PHYS_ADDR
+# ifdef CONFIG_PHYS_ADDR_T_64BIT
 	if (cpu_has_64bits)
 		uasm_i_scd(p, pte, 0, ptr);
 	else
@@ -1548,7 +1548,7 @@ iPTE_SW(u32 **p, struct uasm_reloc **r, unsigned int pte, unsigned int ptr,
 	else
 		uasm_il_beqz(p, r, pte, label_smp_pgtable_change);
 
-# ifdef CONFIG_64BIT_PHYS_ADDR
+# ifdef CONFIG_PHYS_ADDR_T_64BIT
 	if (!cpu_has_64bits) {
 		/* no uasm_i_nop needed */
 		uasm_i_ll(p, pte, sizeof(pte_t) / 2, ptr);
@@ -1563,14 +1563,14 @@ iPTE_SW(u32 **p, struct uasm_reloc **r, unsigned int pte, unsigned int ptr,
 	uasm_i_nop(p);
 # endif
 #else
-# ifdef CONFIG_64BIT_PHYS_ADDR
+# ifdef CONFIG_PHYS_ADDR_T_64BIT
 	if (cpu_has_64bits)
 		uasm_i_sd(p, pte, 0, ptr);
 	else
 # endif
 		UASM_i_SW(p, pte, 0, ptr);
 
-# ifdef CONFIG_64BIT_PHYS_ADDR
+# ifdef CONFIG_PHYS_ADDR_T_64BIT
 	if (!cpu_has_64bits) {
 		uasm_i_lw(p, pte, sizeof(pte_t) / 2, ptr);
 		uasm_i_ori(p, pte, pte, hwmode);