[MIPS] Remove Momenco Ocelot C support

Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

 delete mode 100644 arch/mips/configs/ocelot_c_defconfig
 delete mode 100644 arch/mips/momentum/ocelot_c/Makefile
 delete mode 100644 arch/mips/momentum/ocelot_c/cpci-irq.c
 delete mode 100644 arch/mips/momentum/ocelot_c/dbg_io.c
 delete mode 100644 arch/mips/momentum/ocelot_c/irq.c
 delete mode 100644 arch/mips/momentum/ocelot_c/ocelot_c_fpga.h
 delete mode 100644 arch/mips/momentum/ocelot_c/platform.c
 delete mode 100644 arch/mips/momentum/ocelot_c/prom.c
 delete mode 100644 arch/mips/momentum/ocelot_c/reset.c
 delete mode 100644 arch/mips/momentum/ocelot_c/setup.c
 delete mode 100644 arch/mips/momentum/ocelot_c/uart-irq.c
 delete mode 100644 arch/mips/pci/fixup-ocelot-c.c
 delete mode 100644 arch/mips/pci/pci-ocelot-c.c

1 files changed, 0 insertions, 100 deletions

diff --git a/arch/mips/momentum/ocelot_c/cpci-irq.c b/arch/mips/momentum/ocelot_c/cpci-irq.c
deleted file mode 100644
index 186a140fd2a..00000000000
--- a/arch/mips/momentum/ocelot_c/cpci-irq.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * Copyright 2002 Momentum Computer
- * Author: mdharm@momenco.com
- *
- * arch/mips/momentum/ocelot_c/cpci-irq.c
- *     Interrupt routines for cpci.  Interrupt numbers are assigned from
- *     CPCI_IRQ_BASE to CPCI_IRQ_BASE+8 (8 interrupt sources).
- *
- * Note that the high-level software will need to be careful about using
- * these interrupts.  If this board is asserting a cPCI interrupt, it will
- * also see the asserted interrupt.  Care must be taken to avoid an
- * interrupt flood.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/kernel_stat.h>
-#include <asm/io.h>
-#include "ocelot_c_fpga.h"
-
-#define CPCI_IRQ_BASE	8
-
-static inline int ls1bit8(unsigned int x)
-{
-        int b = 7, s;
-
-        s =  4; if (((unsigned char)(x <<  4)) == 0) s = 0; b -= s; x <<= s;
-        s =  2; if (((unsigned char)(x <<  2)) == 0) s = 0; b -= s; x <<= s;
-        s =  1; if (((unsigned char)(x <<  1)) == 0) s = 0; b -= s;
-
-        return b;
-}
-
-/* mask off an interrupt -- 0 is enable, 1 is disable */
-static inline void mask_cpci_irq(unsigned int irq)
-{
-	uint32_t value;
-
-	value = OCELOT_FPGA_READ(INTMASK);
-	value |= 1 << (irq - CPCI_IRQ_BASE);
-	OCELOT_FPGA_WRITE(value, INTMASK);
-
-	/* read the value back to assure that it's really been written */
-	value = OCELOT_FPGA_READ(INTMASK);
-}
-
-/* unmask an interrupt -- 0 is enable, 1 is disable */
-static inline void unmask_cpci_irq(unsigned int irq)
-{
-	uint32_t value;
-
-	value = OCELOT_FPGA_READ(INTMASK);
-	value &= ~(1 << (irq - CPCI_IRQ_BASE));
-	OCELOT_FPGA_WRITE(value, INTMASK);
-
-	/* read the value back to assure that it's really been written */
-	value = OCELOT_FPGA_READ(INTMASK);
-}
-
-/*
- * Interrupt handler for interrupts coming from the FPGA chip.
- * It could be built in ethernet ports etc...
- */
-void ll_cpci_irq(void)
-{
-	unsigned int irq_src, irq_mask;
-
-	/* read the interrupt status registers */
-	irq_src = OCELOT_FPGA_READ(INTSTAT);
-	irq_mask = OCELOT_FPGA_READ(INTMASK);
-
-	/* mask for just the interrupts we want */
-	irq_src &= ~irq_mask;
-
-	do_IRQ(ls1bit8(irq_src) + CPCI_IRQ_BASE);
-}
-
-struct irq_chip cpci_irq_type = {
-	.name = "CPCI/FPGA",
-	.ack = mask_cpci_irq,
-	.mask = mask_cpci_irq,
-	.mask_ack = mask_cpci_irq,
-	.unmask = unmask_cpci_irq,
-};
-
-void cpci_irq_init(void)
-{
-	int i;
-
-	for (i = CPCI_IRQ_BASE; i < (CPCI_IRQ_BASE + 8); i++)
-		set_irq_chip_and_handler(i, &cpci_irq_type, handle_level_irq);
-}