MIPS: Netlogic: Support for multi-chip configuration

Upto 4 Netlogic XLP SoCs can be connected over ICI links to form a
coherent multi-node system.  Each SoC has its own set of on-chip
devices including PIC.  To support this, add a per SoC stucture and
use it for the PIC and SYS block addresses instead of using global
variables.

Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Patchwork: http://patchwork.linux-mips.org/patch/4469
Signed-off-by: John Crispin <blogic@openwrt.org>

2 files changed, 32 insertions, 9 deletions

diff --git a/arch/mips/netlogic/xlr/setup.c b/arch/mips/netlogic/xlr/setup.c
index 8fca6807cab..696d4248b92 100644
--- a/arch/mips/netlogic/xlr/setup.c
+++ b/arch/mips/netlogic/xlr/setup.c
@@ -51,14 +51,11 @@
 #include <asm/netlogic/xlr/gpio.h>
 
 uint64_t nlm_io_base = DEFAULT_NETLOGIC_IO_BASE;
-uint64_t nlm_pic_base;
 struct psb_info nlm_prom_info;
 
-unsigned long nlm_common_ebase = 0x0;
-
 /* default to uniprocessor */
-uint32_t nlm_coremask = 1;
-int  nlm_threads_per_core = 1;
+unsigned int  nlm_threads_per_core = 1;
+struct nlm_soc_info nlm_nodes[NLM_NR_NODES];
 cpumask_t nlm_cpumask = CPU_MASK_CPU0;
 
 static void __init nlm_early_serial_setup(void)
@@ -177,6 +174,16 @@ static void prom_add_memory(void)
 	}
 }
 
+static void nlm_init_node(void)
+{
+	struct nlm_soc_info *nodep;
+
+	nodep = nlm_current_node();
+	nodep->picbase = nlm_mmio_base(NETLOGIC_IO_PIC_OFFSET);
+	nodep->ebase = read_c0_ebase() & (~((1 << 12) - 1));
+	spin_lock_init(&nodep->piclock);
+}
+
 void __init prom_init(void)
 {
 	int i, *argv, *envp;		/* passed as 32 bit ptrs */
@@ -188,11 +195,10 @@ void __init prom_init(void)
 	prom_infop = (struct psb_info *)(long)(int)fw_arg3;
 
 	nlm_prom_info = *prom_infop;
-	nlm_pic_base = nlm_mmio_base(NETLOGIC_IO_PIC_OFFSET);
+	nlm_init_node();
 
 	nlm_early_serial_setup();
 	build_arcs_cmdline(argv);
-	nlm_common_ebase = read_c0_ebase() & (~((1 << 12) - 1));
 	prom_add_memory();
 
 #ifdef CONFIG_SMP
diff --git a/arch/mips/netlogic/xlr/wakeup.c b/arch/mips/netlogic/xlr/wakeup.c
index 0878924da15..3ebf7411d67 100644
--- a/arch/mips/netlogic/xlr/wakeup.c
+++ b/arch/mips/netlogic/xlr/wakeup.c
@@ -33,6 +33,7 @@
  */
 
 #include <linux/init.h>
+#include <linux/delay.h>
 #include <linux/threads.h>
 
 #include <asm/asm.h>
@@ -50,18 +51,34 @@
 
 int __cpuinit xlr_wakeup_secondary_cpus(void)
 {
-	unsigned int i, boot_cpu;
+	struct nlm_soc_info *nodep;
+	unsigned int i, j, boot_cpu;
 
 	/*
 	 *  In case of RMI boot, hit with NMI to get the cores
 	 *  from bootloader to linux code.
 	 */
+	nodep = nlm_get_node(0);
 	boot_cpu = hard_smp_processor_id();
 	nlm_set_nmi_handler(nlm_rmiboot_preboot);
 	for (i = 0; i < NR_CPUS; i++) {
 		if (i == boot_cpu || !cpumask_test_cpu(i, &nlm_cpumask))
 			continue;
-		nlm_pic_send_ipi(nlm_pic_base, i, 1, 1); /* send NMI */
+		nlm_pic_send_ipi(nodep->picbase, i, 1, 1); /* send NMI */
+	}
+
+	/* Fill up the coremask early */
+	nodep->coremask = 1;
+	for (i = 1; i < NLM_CORES_PER_NODE; i++) {
+		for (j = 1000000; j > 0; j--) {
+			if (nlm_cpu_ready[i * NLM_THREADS_PER_CORE])
+				break;
+			udelay(10);
+		}
+		if (j != 0)
+			nodep->coremask |= (1u << i);
+		else
+			pr_err("Failed to wakeup core %d\n", i);
 	}
 
 	return 0;