Merge branch 'master' into for-3.12/upstream

Sync with Linus' tree to be able to apply fixup patch on top
of 9d9a04ee75 ("HID: apple: Add support for the 2013 Macbook Air")

Signed-off-by: Jiri Kosina <jkosina@suse.cz>

19 files changed, 712 insertions, 313 deletions

diff --git a/arch/mips/netlogic/Kconfig b/arch/mips/netlogic/Kconfig
index e0873a31eba..2447bf97d35 100644
--- a/arch/mips/netlogic/Kconfig
+++ b/arch/mips/netlogic/Kconfig
@@ -51,4 +51,15 @@ endif
 config NLM_COMMON
 	bool
 
+config IOMMU_HELPER
+	bool
+
+config NEED_SG_DMA_LENGTH
+	bool
+
+config SWIOTLB
+	def_bool y
+	select NEED_SG_DMA_LENGTH
+	select IOMMU_HELPER
+
 endif
diff --git a/arch/mips/netlogic/common/Makefile b/arch/mips/netlogic/common/Makefile
index 291372a086f..362739d62b1 100644
--- a/arch/mips/netlogic/common/Makefile
+++ b/arch/mips/netlogic/common/Makefile
@@ -1,3 +1,5 @@
 obj-y				+= irq.o time.o
+obj-y				+= nlm-dma.o
+obj-y				+= reset.o
 obj-$(CONFIG_SMP)		+= smp.o smpboot.o
 obj-$(CONFIG_EARLY_PRINTK)	+= earlycons.o
diff --git a/arch/mips/netlogic/common/irq.c b/arch/mips/netlogic/common/irq.c
index 9f84c60bf53..1c7e3a1b81a 100644
--- a/arch/mips/netlogic/common/irq.c
+++ b/arch/mips/netlogic/common/irq.c
@@ -40,6 +40,10 @@
 #include <linux/slab.h>
 #include <linux/irq.h>
 
+#include <linux/irqdomain.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
 #include <asm/errno.h>
 #include <asm/signal.h>
 #include <asm/ptrace.h>
@@ -223,17 +227,6 @@ static void nlm_init_node_irqs(int node)
 	nodep->irqmask = irqmask;
 }
 
-void __init arch_init_irq(void)
-{
-	/* Initialize the irq descriptors */
-	nlm_init_percpu_irqs();
-	nlm_init_node_irqs(0);
-	write_c0_eimr(nlm_current_node()->irqmask);
-#if defined(CONFIG_CPU_XLR)
-	nlm_setup_fmn_irq();
-#endif
-}
-
 void nlm_smp_irq_init(int hwcpuid)
 {
 	int node, cpu;
@@ -253,13 +246,12 @@ asmlinkage void plat_irq_dispatch(void)
 
 	node = nlm_nodeid();
 	eirr = read_c0_eirr_and_eimr();
-
-	i = __ilog2_u64(eirr);
-	if (i == -1)
+	if (eirr == 0)
 		return;
 
+	i = __ffs64(eirr);
 	/* per-CPU IRQs don't need translation */
-	if (eirr & PERCPU_IRQ_MASK) {
+	if (i < PIC_IRQ_BASE) {
 		do_IRQ(i);
 		return;
 	}
@@ -267,3 +259,56 @@ asmlinkage void plat_irq_dispatch(void)
 	/* top level irq handling */
 	do_IRQ(nlm_irq_to_xirq(node, i));
 }
+
+#ifdef CONFIG_OF
+static struct irq_domain *xlp_pic_domain;
+
+static const struct irq_domain_ops xlp_pic_irq_domain_ops = {
+	.xlate = irq_domain_xlate_onetwocell,
+};
+
+static int __init xlp_of_pic_init(struct device_node *node,
+					struct device_node *parent)
+{
+	const int n_picirqs = PIC_IRT_LAST_IRQ - PIC_IRQ_BASE + 1;
+	struct resource res;
+	int socid, ret;
+
+	/* we need a hack to get the PIC's SoC chip id */
+	ret = of_address_to_resource(node, 0, &res);
+	if (ret < 0) {
+		pr_err("PIC %s: reg property not found!\n", node->name);
+		return -EINVAL;
+	}
+	socid = (res.start >> 18) & 0x3;
+	xlp_pic_domain = irq_domain_add_legacy(node, n_picirqs,
+		nlm_irq_to_xirq(socid, PIC_IRQ_BASE), PIC_IRQ_BASE,
+		&xlp_pic_irq_domain_ops, NULL);
+	if (xlp_pic_domain == NULL) {
+		pr_err("PIC %s: Creating legacy domain failed!\n", node->name);
+		return -EINVAL;
+	}
+	pr_info("Node %d: IRQ domain created for PIC@%pa\n", socid,
+							&res.start);
+	return 0;
+}
+
+static struct of_device_id __initdata xlp_pic_irq_ids[] = {
+	{ .compatible = "netlogic,xlp-pic", .data = xlp_of_pic_init },
+	{},
+};
+#endif
+
+void __init arch_init_irq(void)
+{
+	/* Initialize the irq descriptors */
+	nlm_init_percpu_irqs();
+	nlm_init_node_irqs(0);
+	write_c0_eimr(nlm_current_node()->irqmask);
+#if defined(CONFIG_CPU_XLR)
+	nlm_setup_fmn_irq();
+#endif
+#if defined(CONFIG_OF)
+	of_irq_init(xlp_pic_irq_ids);
+#endif
+}
diff --git a/arch/mips/netlogic/common/nlm-dma.c b/arch/mips/netlogic/common/nlm-dma.c
new file mode 100644
index 00000000000..f3d4ae87abc
--- /dev/null
+++ b/arch/mips/netlogic/common/nlm-dma.c
@@ -0,0 +1,107 @@
+/*
+*  Copyright (C) 2003-2013 Broadcom Corporation
+*  All Rights Reserved
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the Broadcom
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include <linux/dma-mapping.h>
+#include <linux/scatterlist.h>
+#include <linux/bootmem.h>
+#include <linux/export.h>
+#include <linux/swiotlb.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+
+#include <asm/bootinfo.h>
+
+static char *nlm_swiotlb;
+
+static void *nlm_dma_alloc_coherent(struct device *dev, size_t size,
+	dma_addr_t *dma_handle, gfp_t gfp, struct dma_attrs *attrs)
+{
+	void *ret;
+
+	if (dma_alloc_from_coherent(dev, size, dma_handle, &ret))
+		return ret;
+
+	/* ignore region specifiers */
+	gfp &= ~(__GFP_DMA | __GFP_DMA32 | __GFP_HIGHMEM);
+
+#ifdef CONFIG_ZONE_DMA32
+	if (dev->coherent_dma_mask <= DMA_BIT_MASK(32))
+		gfp |= __GFP_DMA32;
+#endif
+
+	/* Don't invoke OOM killer */
+	gfp |= __GFP_NORETRY;
+
+	return swiotlb_alloc_coherent(dev, size, dma_handle, gfp);
+}
+
+static void nlm_dma_free_coherent(struct device *dev, size_t size,
+	void *vaddr, dma_addr_t dma_handle, struct dma_attrs *attrs)
+{
+	int order = get_order(size);
+
+	if (dma_release_from_coherent(dev, order, vaddr))
+		return;
+
+	swiotlb_free_coherent(dev, size, vaddr, dma_handle);
+}
+
+struct dma_map_ops nlm_swiotlb_dma_ops = {
+	.alloc = nlm_dma_alloc_coherent,
+	.free = nlm_dma_free_coherent,
+	.map_page = swiotlb_map_page,
+	.unmap_page = swiotlb_unmap_page,
+	.map_sg = swiotlb_map_sg_attrs,
+	.unmap_sg = swiotlb_unmap_sg_attrs,
+	.sync_single_for_cpu = swiotlb_sync_single_for_cpu,
+	.sync_single_for_device = swiotlb_sync_single_for_device,
+	.sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
+	.sync_sg_for_device = swiotlb_sync_sg_for_device,
+	.mapping_error = swiotlb_dma_mapping_error,
+	.dma_supported = swiotlb_dma_supported
+};
+
+void __init plat_swiotlb_setup(void)
+{
+	size_t swiotlbsize;
+	unsigned long swiotlb_nslabs;
+
+	swiotlbsize = 1 << 20; /* 1 MB for now */
+	swiotlb_nslabs = swiotlbsize >> IO_TLB_SHIFT;
+	swiotlb_nslabs = ALIGN(swiotlb_nslabs, IO_TLB_SEGSIZE);
+	swiotlbsize = swiotlb_nslabs << IO_TLB_SHIFT;
+
+	nlm_swiotlb = alloc_bootmem_low_pages(swiotlbsize);
+	swiotlb_init_with_tbl(nlm_swiotlb, swiotlb_nslabs, 1);
+}
diff --git a/arch/mips/netlogic/common/reset.S b/arch/mips/netlogic/common/reset.S
new file mode 100644
index 00000000000..adb18288a6c
--- /dev/null
+++ b/arch/mips/netlogic/common/reset.S
@@ -0,0 +1,230 @@
+/*
+ * Copyright 2003-2013 Broadcom Corporation.
+ * All Rights Reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the Broadcom
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/init.h>
+
+#include <asm/asm.h>
+#include <asm/asm-offsets.h>
+#include <asm/regdef.h>
+#include <asm/mipsregs.h>
+#include <asm/stackframe.h>
+#include <asm/asmmacro.h>
+#include <asm/addrspace.h>
+
+#include <asm/netlogic/common.h>
+
+#include <asm/netlogic/xlp-hal/iomap.h>
+#include <asm/netlogic/xlp-hal/xlp.h>
+#include <asm/netlogic/xlp-hal/sys.h>
+#include <asm/netlogic/xlp-hal/cpucontrol.h>
+
+#define CP0_EBASE	$15
+#define SYS_CPU_COHERENT_BASE(node)	CKSEG1ADDR(XLP_DEFAULT_IO_BASE) + \
+			XLP_IO_SYS_OFFSET(node) + XLP_IO_PCI_HDRSZ + \
+			SYS_CPU_NONCOHERENT_MODE * 4
+
+/* Enable XLP features and workarounds in the LSU */
+.macro xlp_config_lsu
+	li	t0, LSU_DEFEATURE
+	mfcr	t1, t0
+
+	lui	t2, 0xc080	/* SUE, Enable Unaligned Access, L2HPE */
+	or	t1, t1, t2
+	mtcr	t1, t0
+
+	li	t0, ICU_DEFEATURE
+	mfcr	t1, t0
+	ori	t1, 0x1000	/* Enable Icache partitioning */
+	mtcr	t1, t0
+
+	li	t0, SCHED_DEFEATURE
+	lui	t1, 0x0100	/* Disable BRU accepting ALU ops */
+	mtcr	t1, t0
+.endm
+
+/*
+ * Low level flush for L1D cache on XLP, the normal cache ops does
+ * not do the complete and correct cache flush.
+ */
+.macro	xlp_flush_l1_dcache
+	li	t0, LSU_DEBUG_DATA0
+	li	t1, LSU_DEBUG_ADDR
+	li	t2, 0		/* index */
+	li	t3, 0x1000	/* loop count */
+1:
+	sll	v0, t2, 5
+	mtcr	zero, t0
+	ori	v1, v0, 0x3	/* way0 | write_enable | write_active */
+	mtcr	v1, t1
+2:
+	mfcr	v1, t1
+	andi	v1, 0x1		/* wait for write_active == 0 */
+	bnez	v1, 2b
+	nop
+	mtcr	zero, t0
+	ori	v1, v0, 0x7	/* way1 | write_enable | write_active */
+	mtcr	v1, t1
+3:
+	mfcr	v1, t1
+	andi	v1, 0x1		/* wait for write_active == 0 */
+	bnez	v1, 3b
+	nop
+	addi	t2, 1
+	bne	t3, t2, 1b
+	nop
+.endm
+
+/*
+ * nlm_reset_entry will be copied to the reset entry point for
+ * XLR and XLP. The XLP cores start here when they are woken up. This
+ * is also the NMI entry point.
+ *
+ * We use scratch reg 6/7 to save k0/k1 and check for NMI first.
+ *
+ * The data corresponding to reset/NMI is stored at RESET_DATA_PHYS
+ * location, this will have the thread mask (used when core is woken up)
+ * and the current NMI handler in case we reached here for an NMI.
+ *
+ * When a core or thread is newly woken up, it marks itself ready and
+ * loops in a 'wait'. When the CPU really needs waking up, we send an NMI
+ * IPI to it, with the NMI handler set to prom_boot_secondary_cpus
+ */
+	.set	noreorder
+	.set	noat
+	.set	arch=xlr	/* for mfcr/mtcr, XLR is sufficient */
+
+FEXPORT(nlm_reset_entry)
+	dmtc0	k0, $22, 6
+	dmtc0	k1, $22, 7
+	mfc0	k0, CP0_STATUS
+	li	k1, 0x80000
+	and	k1, k0, k1
+	beqz	k1, 1f		/* go to real reset entry */
+	nop
+	li	k1, CKSEG1ADDR(RESET_DATA_PHYS) /* NMI */
+	ld	k0, BOOT_NMI_HANDLER(k1)
+	jr	k0
+	nop
+
+1:	/* Entry point on core wakeup */
+	mfc0	t0, CP0_EBASE, 1
+	mfc0	t1, CP0_EBASE, 1
+	srl	t1, 5
+	andi	t1, 0x3			/* t1 <- node */
+	li	t2, 0x40000
+	mul	t3, t2, t1		/* t3 = node * 0x40000 */
+	srl	t0, t0, 2
+	and	t0, t0, 0x7		/* t0 <- core */
+	li	t1, 0x1
+	sll	t0, t1, t0
+	nor	t0, t0, zero		/* t0 <- ~(1 << core) */
+	li	t2, SYS_CPU_COHERENT_BASE(0)
+	add	t2, t2, t3		/* t2 <- SYS offset for node */
+	lw	t1, 0(t2)
+	and	t1, t1, t0
+	sw	t1, 0(t2)
+
+	/* read back to ensure complete */
+	lw	t1, 0(t2)
+	sync
+
+	/* Configure LSU on Non-0 Cores. */
+	xlp_config_lsu
+	/* FALL THROUGH */
+
+/*
+ * Wake up sibling threads from the initial thread in
+ * a core.
+ */
+EXPORT(nlm_boot_siblings)
+	/* core L1D flush before enable threads */
+	xlp_flush_l1_dcache
+	/* Enable hw threads by writing to MAP_THREADMODE of the core */
+	li	t0, CKSEG1ADDR(RESET_DATA_PHYS)
+	lw	t1, BOOT_THREAD_MODE(t0)	/* t1 <- thread mode */
+	li	t0, ((CPU_BLOCKID_MAP << 8) | MAP_THREADMODE)
+	mfcr	t2, t0
+	or	t2, t2, t1
+	mtcr	t2, t0
+
+	/*
+	 * The new hardware thread starts at the next instruction
+	 * For all the cases other than core 0 thread 0, we will
+	* jump to the secondary wait function.
+	*/
+	mfc0	v0, CP0_EBASE, 1
+	andi	v0, 0x3ff		/* v0 <- node/core */
+
+	beqz	v0, 4f		/* boot cpu (cpuid == 0)? */
+	nop
+
+	/* setup status reg */
+	move	t1, zero
+#ifdef CONFIG_64BIT
+	ori	t1, ST0_KX
+#endif
+	mtc0	t1, CP0_STATUS
+
+	/* mark CPU ready, careful here, previous mtcr trashed registers */
+	li	t3, CKSEG1ADDR(RESET_DATA_PHYS)
+	ADDIU	t1, t3, BOOT_CPU_READY
+	sll	v1, v0, 2
+	PTR_ADDU t1, v1
+	li	t2, 1
+	sw	t2, 0(t1)
+	/* Wait until NMI hits */
+3:	wait
+	b	3b
+	nop
+
+	/*
+	 * For the boot CPU, we have to restore registers and
+	 * return
+	 */
+4:	dmfc0	t0, $4, 2	/* restore SP from UserLocal */
+	li	t1, 0xfadebeef
+	dmtc0	t1, $4, 2	/* restore SP from UserLocal */
+	PTR_SUBU sp, t0, PT_SIZE
+	RESTORE_ALL
+	jr	ra
+	nop
+EXPORT(nlm_reset_entry_end)
+
+LEAF(nlm_init_boot_cpu)
+#ifdef CONFIG_CPU_XLP
+	xlp_config_lsu
+#endif
+	jr	ra
+	nop
+END(nlm_init_boot_cpu)
diff --git a/arch/mips/netlogic/common/smp.c b/arch/mips/netlogic/common/smp.c
index ffba52489be..4e35d9c453e 100644
--- a/arch/mips/netlogic/common/smp.c
+++ b/arch/mips/netlogic/common/smp.c
@@ -116,7 +116,7 @@ void nlm_early_init_secondary(int cpu)
 /*
  * Code to run on secondary just after probing the CPU
  */
-static void __cpuinit nlm_init_secondary(void)
+static void nlm_init_secondary(void)
 {
 	int hwtid;
 
@@ -145,7 +145,6 @@ void nlm_cpus_done(void)
  * Boot all other cpus in the system, initialize them, and bring them into
  * the boot function
  */
-int nlm_cpu_ready[NR_CPUS];
 unsigned long nlm_next_gp;
 unsigned long nlm_next_sp;
 static cpumask_t phys_cpu_present_mask;
@@ -168,6 +167,7 @@ void __init nlm_smp_setup(void)
 {
 	unsigned int boot_cpu;
 	int num_cpus, i, ncore;
+	volatile u32 *cpu_ready = nlm_get_boot_data(BOOT_CPU_READY);
 	char buf[64];
 
 	boot_cpu = hard_smp_processor_id();
@@ -181,10 +181,10 @@ void __init nlm_smp_setup(void)
 	num_cpus = 1;
 	for (i = 0; i < NR_CPUS; i++) {
 		/*
-		 * nlm_cpu_ready array is not set for the boot_cpu,
+		 * cpu_ready array is not set for the boot_cpu,
 		 * it is only set for ASPs (see smpboot.S)
 		 */
-		if (nlm_cpu_ready[i]) {
+		if (cpu_ready[i]) {
 			cpumask_set_cpu(i, &phys_cpu_present_mask);
 			__cpu_number_map[i] = num_cpus;
 			__cpu_logical_map[num_cpus] = i;
@@ -252,23 +252,17 @@ unsupp:
 	return 0;
 }
 
-int __cpuinit nlm_wakeup_secondary_cpus(void)
+int nlm_wakeup_secondary_cpus(void)
 {
-	unsigned long reset_vec;
-	char *reset_data;
+	u32 *reset_data;
 	int threadmode;
 
-	/* Update reset entry point with CPU init code */
-	reset_vec = CKSEG1ADDR(RESET_VEC_PHYS);
-	memcpy((void *)reset_vec, (void *)nlm_reset_entry,
-			(nlm_reset_entry_end - nlm_reset_entry));
-
 	/* verify the mask and setup core config variables */
 	threadmode = nlm_parse_cpumask(&nlm_cpumask);
 
 	/* Setup CPU init parameters */
-	reset_data = (char *)CKSEG1ADDR(RESET_DATA_PHYS);
-	*(int *)(reset_data + BOOT_THREAD_MODE) = threadmode;
+	reset_data = nlm_get_boot_data(BOOT_THREAD_MODE);
+	*reset_data = threadmode;
 
 #ifdef CONFIG_CPU_XLP
 	xlp_wakeup_secondary_cpus();
diff --git a/arch/mips/netlogic/common/smpboot.S b/arch/mips/netlogic/common/smpboot.S
index 02651748858..aa6cff0a229 100644
--- a/arch/mips/netlogic/common/smpboot.S
+++ b/arch/mips/netlogic/common/smpboot.S
@@ -50,197 +50,12 @@
 #include <asm/netlogic/xlp-hal/cpucontrol.h>
 
 #define CP0_EBASE	$15
-#define SYS_CPU_COHERENT_BASE(node)	CKSEG1ADDR(XLP_DEFAULT_IO_BASE) + \
-			XLP_IO_SYS_OFFSET(node) + XLP_IO_PCI_HDRSZ + \
-			SYS_CPU_NONCOHERENT_MODE * 4
-
-#define XLP_AX_WORKAROUND	/* enable Ax silicon workarounds */
-
-/* Enable XLP features and workarounds in the LSU */
-.macro xlp_config_lsu
-	li	t0, LSU_DEFEATURE
-	mfcr	t1, t0
-
-	lui	t2, 0xc080	/* SUE, Enable Unaligned Access, L2HPE */
-	or	t1, t1, t2
-#ifdef XLP_AX_WORKAROUND
-	li	t2, ~0xe	/* S1RCM */
-	and	t1, t1, t2
-#endif
-	mtcr	t1, t0
-
-	li	t0, ICU_DEFEATURE
-	mfcr	t1, t0
-	ori	t1, 0x1000	/* Enable Icache partitioning */
-	mtcr	t1, t0
-
-
-#ifdef XLP_AX_WORKAROUND
-	li	t0, SCHED_DEFEATURE
-	lui	t1, 0x0100	/* Disable BRU accepting ALU ops */
-	mtcr	t1, t0
-#endif
-.endm
-
-/*
- * This is the code that will be copied to the reset entry point for
- * XLR and XLP. The XLP cores start here when they are woken up. This
- * is also the NMI entry point.
- */
-.macro	xlp_flush_l1_dcache
-	li	t0, LSU_DEBUG_DATA0
-	li	t1, LSU_DEBUG_ADDR
-	li	t2, 0		/* index */
-	li	t3, 0x1000	/* loop count */
-1:
-	sll	v0, t2, 5
-	mtcr	zero, t0
-	ori	v1, v0, 0x3	/* way0 | write_enable | write_active */
-	mtcr	v1, t1
-2:
-	mfcr	v1, t1
-	andi	v1, 0x1		/* wait for write_active == 0 */
-	bnez	v1, 2b
-	nop
-	mtcr	zero, t0
-	ori	v1, v0, 0x7	/* way1 | write_enable | write_active */
-	mtcr	v1, t1
-3:
-	mfcr	v1, t1
-	andi	v1, 0x1		/* wait for write_active == 0 */
-	bnez	v1, 3b
-	nop
-	addi	t2, 1
-	bne	t3, t2, 1b
-	nop
-.endm
-
-/*
- * The cores can come start when they are woken up. This is also the NMI
- * entry, so check that first.
- *
- * The data corresponding to reset/NMI is stored at RESET_DATA_PHYS
- * location, this will have the thread mask (used when core is woken up)
- * and the current NMI handler in case we reached here for an NMI.
- *
- * When a core or thread is newly woken up, it loops in a 'wait'. When
- * the CPU really needs waking up, we send an NMI to it, with the NMI
- * handler set to prom_boot_secondary_cpus
- */
 
 	.set	noreorder
 	.set	noat
-	.set	arch=xlr	/* for mfcr/mtcr, XLR is sufficient */
-
-FEXPORT(nlm_reset_entry)
-	dmtc0	k0, $22, 6
-	dmtc0	k1, $22, 7
-	mfc0	k0, CP0_STATUS
-	li	k1, 0x80000
-	and	k1, k0, k1
-	beqz	k1, 1f		/* go to real reset entry */
-	nop
-	li	k1, CKSEG1ADDR(RESET_DATA_PHYS) /* NMI */
-	ld	k0, BOOT_NMI_HANDLER(k1)
-	jr	k0
-	nop
-
-1:	/* Entry point on core wakeup */
-	mfc0	t0, CP0_EBASE, 1
-	mfc0	t1, CP0_EBASE, 1
-	srl	t1, 5
-	andi	t1, 0x3			/* t1 <- node */
-	li	t2, 0x40000
-	mul	t3, t2, t1		/* t3 = node * 0x40000 */
-	srl	t0, t0, 2
-	and	t0, t0, 0x7		/* t0 <- core */
-	li	t1, 0x1
-	sll	t0, t1, t0
-	nor	t0, t0, zero		/* t0 <- ~(1 << core) */
-	li	t2, SYS_CPU_COHERENT_BASE(0)
-	add	t2, t2, t3		/* t2 <- SYS offset for node */
-	lw	t1, 0(t2)
-	and	t1, t1, t0
-	sw	t1, 0(t2)
-
-	/* read back to ensure complete */
-	lw	t1, 0(t2)
-	sync
-
-	/* Configure LSU on Non-0 Cores. */
-	xlp_config_lsu
-	/* FALL THROUGH */
-
-/*
- * Wake up sibling threads from the initial thread in
- * a core.
- */
-EXPORT(nlm_boot_siblings)
-	/* core L1D flush before enable threads */
-	xlp_flush_l1_dcache
-	/* Enable hw threads by writing to MAP_THREADMODE of the core */
-	li	t0, CKSEG1ADDR(RESET_DATA_PHYS)
-	lw	t1, BOOT_THREAD_MODE(t0)	/* t1 <- thread mode */
-	li	t0, ((CPU_BLOCKID_MAP << 8) | MAP_THREADMODE)
-	mfcr	t2, t0
-	or	t2, t2, t1
-	mtcr	t2, t0
-
-	/*
-	 * The new hardware thread starts at the next instruction
-	 * For all the cases other than core 0 thread 0, we will
-	* jump to the secondary wait function.
-	*/
-	mfc0	v0, CP0_EBASE, 1
-	andi	v0, 0x3ff		/* v0 <- node/core */
-
-	/* Init MMU in the first thread after changing THREAD_MODE
-	 * register (Ax Errata?)
-	 */
-	andi	v1, v0, 0x3		/* v1 <- thread id */
-	bnez	v1, 2f
-	nop
-
-	li	t0, MMU_SETUP
-	li	t1, 0
-	mtcr	t1, t0
-	_ehb
-
-2:	beqz	v0, 4f		/* boot cpu (cpuid == 0)? */
-	nop
-
-	/* setup status reg */
-	move	t1, zero
-#ifdef CONFIG_64BIT
-	ori	t1, ST0_KX
-#endif
-	mtc0	t1, CP0_STATUS
-	/* mark CPU ready */
-	PTR_LA	t1, nlm_cpu_ready
-	sll	v1, v0, 2
-	PTR_ADDU t1, v1
-	li	t2, 1
-	sw	t2, 0(t1)
-	/* Wait until NMI hits */
-3:	wait
-	j	3b
-	nop
-
-	/*
-	 * For the boot CPU, we have to restore registers and
-	 * return
-	 */
-4:	dmfc0	t0, $4, 2	/* restore SP from UserLocal */
-	li	t1, 0xfadebeef
-	dmtc0	t1, $4, 2	/* restore SP from UserLocal */
-	PTR_SUBU sp, t0, PT_SIZE
-	RESTORE_ALL
-	jr   ra
-	nop
-EXPORT(nlm_reset_entry_end)
+	.set	arch=xlr		/* for mfcr/mtcr, XLR is sufficient */
 
 FEXPORT(xlp_boot_core0_siblings)	/* "Master" cpu starts from here */
-	xlp_config_lsu
 	dmtc0	sp, $4, 2		/* SP saved in UserLocal */
 	SAVE_ALL
 	sync
@@ -255,7 +70,6 @@ FEXPORT(xlp_boot_core0_siblings)	/* "Master" cpu starts from here */
 	nop
 	/* not reached */
 
-	__CPUINIT
 NESTED(nlm_boot_secondary_cpus, 16, sp)
 	/* Initialize CP0 Status */
 	move	t1, zero
@@ -279,7 +93,6 @@ NESTED(nlm_boot_secondary_cpus, 16, sp)
 	jr	t0
 	nop
 END(nlm_boot_secondary_cpus)
-	__FINIT
 
 /*
  * In case of RMIboot bootloader which is used on XLR boards, the CPUs
@@ -287,15 +100,15 @@ END(nlm_boot_secondary_cpus)
  * This will get them out of the bootloader code and into linux. Needed
  *  because the bootloader area will be taken and initialized by linux.
  */
-	__CPUINIT
 NESTED(nlm_rmiboot_preboot, 16, sp)
 	mfc0	t0, $15, 1	/* read ebase */
 	andi	t0, 0x1f	/* t0 has the processor_id() */
 	andi	t2, t0, 0x3	/* thread num */
 	sll	t0, 2		/* offset in cpu array */
 
-	PTR_LA	t1, nlm_cpu_ready /* mark CPU ready */
-	PTR_ADDU t1, t0
+	li	t3, CKSEG1ADDR(RESET_DATA_PHYS)
+	ADDIU	t1, t3, BOOT_CPU_READY
+	ADDU	t1, t0
 	li	t3, 1
 	sw	t3, 0(t1)
 
@@ -321,7 +134,6 @@ NESTED(nlm_rmiboot_preboot, 16, sp)
 	mtcr	t1, t0		/* update core control */
 
 1:	wait
-	j	1b
+	b	1b
 	nop
 END(nlm_rmiboot_preboot)
-	__FINIT
diff --git a/arch/mips/netlogic/common/time.c b/arch/mips/netlogic/common/time.c
index 5c56555380b..045a396c57c 100644
--- a/arch/mips/netlogic/common/time.c
+++ b/arch/mips/netlogic/common/time.c
@@ -54,7 +54,7 @@
 #error "Unknown CPU"
 #endif
 
-unsigned int __cpuinit get_c0_compare_int(void)
+unsigned int get_c0_compare_int(void)
 {
 	return IRQ_TIMER;
 }
diff --git a/arch/mips/netlogic/dts/xlp_evp.dts b/arch/mips/netlogic/dts/xlp_evp.dts
index e14f4230806..06407033678 100644
--- a/arch/mips/netlogic/dts/xlp_evp.dts
+++ b/arch/mips/netlogic/dts/xlp_evp.dts
@@ -76,10 +76,11 @@
 			};
 		};
 		pic: pic@4000 {
-			interrupt-controller;
+			compatible = "netlogic,xlp-pic";
 			#address-cells = <0>;
 			#interrupt-cells = <1>;
 			reg = <0 0x4000 0x200>;
+			interrupt-controller;
 		};
 
 		nor_flash@1,0 {
diff --git a/arch/mips/netlogic/dts/xlp_svp.dts b/arch/mips/netlogic/dts/xlp_svp.dts
index 8af4bdbe5d9..9c5db102df5 100644
--- a/arch/mips/netlogic/dts/xlp_svp.dts
+++ b/arch/mips/netlogic/dts/xlp_svp.dts
@@ -76,10 +76,11 @@
 			};
 		};
 		pic: pic@4000 {
-			interrupt-controller;
+			compatible = "netlogic,xlp-pic";
 			#address-cells = <0>;
 			#interrupt-cells = <1>;
 			reg = <0 0x4000 0x200>;
+			interrupt-controller;
 		};
 
 		nor_flash@1,0 {
diff --git a/arch/mips/netlogic/xlp/Makefile b/arch/mips/netlogic/xlp/Makefile
index a84d6ed3746..85ac4a892ce 100644
--- a/arch/mips/netlogic/xlp/Makefile
+++ b/arch/mips/netlogic/xlp/Makefile
@@ -1,3 +1,3 @@
-obj-y				+= setup.o nlm_hal.o
+obj-y				+= setup.o nlm_hal.o cop2-ex.o dt.o
 obj-$(CONFIG_SMP)		+= wakeup.o
 obj-$(CONFIG_USB)		+= usb-init.o
diff --git a/arch/mips/netlogic/xlp/cop2-ex.c b/arch/mips/netlogic/xlp/cop2-ex.c
new file mode 100644
index 00000000000..52bc5de4200
--- /dev/null
+++ b/arch/mips/netlogic/xlp/cop2-ex.c
@@ -0,0 +1,118 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2013 Broadcom Corporation.
+ *
+ * based on arch/mips/cavium-octeon/cpu.c
+ * Copyright (C) 2009 Wind River Systems,
+ *   written by Ralf Baechle <ralf@linux-mips.org>
+ */
+#include <linux/init.h>
+#include <linux/irqflags.h>
+#include <linux/notifier.h>
+#include <linux/prefetch.h>
+#include <linux/sched.h>
+
+#include <asm/cop2.h>
+#include <asm/current.h>
+#include <asm/mipsregs.h>
+#include <asm/page.h>
+
+#include <asm/netlogic/mips-extns.h>
+
+/*
+ * 64 bit ops are done in inline assembly to support 32 bit
+ * compilation
+ */
+void nlm_cop2_save(struct nlm_cop2_state *r)
+{
+	asm volatile(
+		".set	push\n"
+		".set	noat\n"
+		"dmfc2	$1, $0, 0\n"
+		"sd	$1, 0(%1)\n"
+		"dmfc2	$1, $0, 1\n"
+		"sd	$1, 8(%1)\n"
+		"dmfc2	$1, $0, 2\n"
+		"sd	$1, 16(%1)\n"
+		"dmfc2	$1, $0, 3\n"
+		"sd	$1, 24(%1)\n"
+		"dmfc2	$1, $1, 0\n"
+		"sd	$1, 0(%2)\n"
+		"dmfc2	$1, $1, 1\n"
+		"sd	$1, 8(%2)\n"
+		"dmfc2	$1, $1, 2\n"
+		"sd	$1, 16(%2)\n"
+		"dmfc2	$1, $1, 3\n"
+		"sd	$1, 24(%2)\n"
+		".set	pop\n"
+		: "=m"(*r)
+		: "r"(r->tx), "r"(r->rx));
+
+	r->tx_msg_status = __read_32bit_c2_register($2, 0);
+	r->rx_msg_status = __read_32bit_c2_register($3, 0) & 0x0fffffff;
+}
+
+void nlm_cop2_restore(struct nlm_cop2_state *r)
+{
+	u32 rstat;
+
+	asm volatile(
+		".set	push\n"
+		".set	noat\n"
+		"ld	$1, 0(%1)\n"
+		"dmtc2	$1, $0, 0\n"
+		"ld	$1, 8(%1)\n"
+		"dmtc2	$1, $0, 1\n"
+		"ld	$1, 16(%1)\n"
+		"dmtc2	$1, $0, 2\n"
+		"ld	$1, 24(%1)\n"
+		"dmtc2	$1, $0, 3\n"
+		"ld	$1, 0(%2)\n"
+		"dmtc2	$1, $1, 0\n"
+		"ld	$1, 8(%2)\n"
+		"dmtc2	$1, $1, 1\n"
+		"ld	$1, 16(%2)\n"
+		"dmtc2	$1, $1, 2\n"
+		"ld	$1, 24(%2)\n"
+		"dmtc2	$1, $1, 3\n"
+		".set	pop\n"
+		: : "m"(*r), "r"(r->tx), "r"(r->rx));
+
+	__write_32bit_c2_register($2, 0, r->tx_msg_status);
+	rstat = __read_32bit_c2_register($3, 0) & 0xf0000000u;
+	__write_32bit_c2_register($3, 0, r->rx_msg_status | rstat);
+}
+
+static int nlm_cu2_call(struct notifier_block *nfb, unsigned long action,
+	void *data)
+{
+	unsigned long flags;
+	unsigned int status;
+
+	switch (action) {
+	case CU2_EXCEPTION:
+		if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO))
+			break;
+		local_irq_save(flags);
+		KSTK_STATUS(current) |= ST0_CU2;
+		status = read_c0_status();
+		write_c0_status(status | ST0_CU2);
+		nlm_cop2_restore(&(current->thread.cp2));
+		write_c0_status(status & ~ST0_CU2);
+		local_irq_restore(flags);
+		pr_info("COP2 access enabled for pid %d (%s)\n",
+					current->pid, current->comm);
+		return NOTIFY_BAD;	/* Don't call default notifier */
+	}
+
+	return NOTIFY_OK;		/* Let default notifier send signals */
+}
+
+static int __init nlm_cu2_setup(void)
+{
+	return cu2_notifier(nlm_cu2_call, 0);
+}
+early_initcall(nlm_cu2_setup);
diff --git a/arch/mips/netlogic/xlp/dt.c b/arch/mips/netlogic/xlp/dt.c
new file mode 100644
index 00000000000..a15cdbb8d0b
--- /dev/null
+++ b/arch/mips/netlogic/xlp/dt.c
@@ -0,0 +1,99 @@
+/*
+ * Copyright 2003-2013 Broadcom Corporation.
+ * All Rights Reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the Broadcom
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/bootmem.h>
+
+#include <linux/of_fdt.h>
+#include <linux/of_platform.h>
+#include <linux/of_device.h>
+
+extern u32 __dtb_xlp_evp_begin[], __dtb_xlp_svp_begin[], __dtb_start[];
+
+void __init *xlp_dt_init(void *fdtp)
+{
+	if (!fdtp) {
+		switch (current_cpu_data.processor_id & 0xff00) {
+#ifdef CONFIG_DT_XLP_SVP
+		case PRID_IMP_NETLOGIC_XLP3XX:
+			fdtp = __dtb_xlp_svp_begin;
+			break;
+#endif
+#ifdef CONFIG_DT_XLP_EVP
+		case PRID_IMP_NETLOGIC_XLP8XX:
+			fdtp = __dtb_xlp_evp_begin;
+			break;
+#endif
+		default:
+			/* Pick a built-in if any, and hope for the best */
+			fdtp = __dtb_start;
+			break;
+		}
+	}
+	initial_boot_params = fdtp;
+	return fdtp;
+}
+
+void __init device_tree_init(void)
+{
+	unsigned long base, size;
+
+	if (!initial_boot_params)
+		return;
+
+	base = virt_to_phys((void *)initial_boot_params);
+	size = be32_to_cpu(initial_boot_params->totalsize);
+
+	/* Before we do anything, lets reserve the dt blob */
+	reserve_bootmem(base, size, BOOTMEM_DEFAULT);
+
+	unflatten_device_tree();
+
+	/* free the space reserved for the dt blob */
+	free_bootmem(base, size);
+}
+
+static struct of_device_id __initdata xlp_ids[] = {
+	{ .compatible = "simple-bus", },
+	{},
+};
+
+int __init xlp8xx_ds_publish_devices(void)
+{
+	if (!of_have_populated_dt())
+		return 0;
+	return of_platform_bus_probe(NULL, xlp_ids, NULL);
+}
+
+device_initcall(xlp8xx_ds_publish_devices);
diff --git a/arch/mips/netlogic/xlp/setup.c b/arch/mips/netlogic/xlp/setup.c
index eaa99d28cb8..7b638f7be49 100644
--- a/arch/mips/netlogic/xlp/setup.c
+++ b/arch/mips/netlogic/xlp/setup.c
@@ -33,19 +33,13 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/serial_8250.h>
-#include <linux/pm.h>
-#include <linux/bootmem.h>
+#include <linux/of_fdt.h>
 
 #include <asm/idle.h>
 #include <asm/reboot.h>
 #include <asm/time.h>
 #include <asm/bootinfo.h>
 
-#include <linux/of_fdt.h>
-#include <linux/of_platform.h>
-#include <linux/of_device.h>
-
 #include <asm/netlogic/haldefs.h>
 #include <asm/netlogic/common.h>
 
@@ -57,7 +51,6 @@ uint64_t nlm_io_base;
 struct nlm_soc_info nlm_nodes[NLM_NR_NODES];
 cpumask_t nlm_cpumask = CPU_MASK_CPU0;
 unsigned int nlm_threads_per_core;
-extern u32 __dtb_xlp_evp_begin[], __dtb_xlp_svp_begin[], __dtb_start[];
 
 static void nlm_linux_exit(void)
 {
@@ -68,41 +61,28 @@ static void nlm_linux_exit(void)
 		cpu_wait();
 }
 
-void __init plat_mem_setup(void)
+static void nlm_fixup_mem(void)
 {
-	void *fdtp;
+	const int pref_backup = 512;
+	int i;
+
+	for (i = 0; i < boot_mem_map.nr_map; i++) {
+		if (boot_mem_map.map[i].type != BOOT_MEM_RAM)
+			continue;
+		boot_mem_map.map[i].size -= pref_backup;
+	}
+}
 
+void __init plat_mem_setup(void)
+{
 	panic_timeout	= 5;
 	_machine_restart = (void (*)(char *))nlm_linux_exit;
 	_machine_halt	= nlm_linux_exit;
 	pm_power_off	= nlm_linux_exit;
 
-	/*
-	 * If no FDT pointer is passed in, use the built-in FDT.
-	 * device_tree_init() does not handle CKSEG0 pointers in
-	 * 64-bit, so convert pointer.
-	 */
-	fdtp = (void *)(long)fw_arg0;
-	if (!fdtp) {
-		switch (current_cpu_data.processor_id & 0xff00) {
-#ifdef CONFIG_DT_XLP_SVP
-		case PRID_IMP_NETLOGIC_XLP3XX:
-			fdtp = __dtb_xlp_svp_begin;
-			break;
-#endif
-#ifdef CONFIG_DT_XLP_EVP
-		case PRID_IMP_NETLOGIC_XLP8XX:
-			fdtp = __dtb_xlp_evp_begin;
-			break;
-#endif
-		default:
-			/* Pick a built-in if any, and hope for the best */
-			fdtp = __dtb_start;
-			break;
-		}
-	}
-	fdtp = phys_to_virt(__pa(fdtp));
-	early_init_devtree(fdtp);
+	/* memory and bootargs from DT */
+	early_init_devtree(initial_boot_params);
+	nlm_fixup_mem();
 }
 
 const char *get_system_type(void)
@@ -131,9 +111,19 @@ void nlm_percpu_init(int hwcpuid)
 
 void __init prom_init(void)
 {
+	void *reset_vec;
+
 	nlm_io_base = CKSEG1ADDR(XLP_DEFAULT_IO_BASE);
+	nlm_init_boot_cpu();
 	xlp_mmu_init();
 	nlm_node_init(0);
+	xlp_dt_init((void *)(long)fw_arg0);
+
+	/* Update reset entry point with CPU init code */
+	reset_vec = (void *)CKSEG1ADDR(RESET_VEC_PHYS);
+	memset(reset_vec, 0, RESET_VEC_SIZE);
+	memcpy(reset_vec, (void *)nlm_reset_entry,
+			(nlm_reset_entry_end - nlm_reset_entry));
 
 #ifdef CONFIG_SMP
 	cpumask_setall(&nlm_cpumask);
@@ -145,36 +135,3 @@ void __init prom_init(void)
 	register_smp_ops(&nlm_smp_ops);
 #endif
 }
-
-void __init device_tree_init(void)
-{
-	unsigned long base, size;
-
-	if (!initial_boot_params)
-		return;
-
-	base = virt_to_phys((void *)initial_boot_params);
-	size = be32_to_cpu(initial_boot_params->totalsize);
-
-	/* Before we do anything, lets reserve the dt blob */
-	reserve_bootmem(base, size, BOOTMEM_DEFAULT);
-
-	unflatten_device_tree();
-
-	/* free the space reserved for the dt blob */
-	free_bootmem(base, size);
-}
-
-static struct of_device_id __initdata xlp_ids[] = {
-	{ .compatible = "simple-bus", },
-	{},
-};
-
-int __init xlp8xx_ds_publish_devices(void)
-{
-	if (!of_have_populated_dt())
-		return 0;
-	return of_platform_bus_probe(NULL, xlp_ids, NULL);
-}
-
-device_initcall(xlp8xx_ds_publish_devices);
diff --git a/arch/mips/netlogic/xlp/usb-init.c b/arch/mips/netlogic/xlp/usb-init.c
index 9c401dd7833..ef3897ef0dc 100644
--- a/arch/mips/netlogic/xlp/usb-init.c
+++ b/arch/mips/netlogic/xlp/usb-init.c
@@ -119,7 +119,7 @@ static u64 xlp_usb_dmamask = ~(u32)0;
 static void nlm_usb_fixup_final(struct pci_dev *dev)
 {
 	dev->dev.dma_mask		= &xlp_usb_dmamask;
-	dev->dev.coherent_dma_mask	= DMA_BIT_MASK(64);
+	dev->dev.coherent_dma_mask	= DMA_BIT_MASK(32);
 	switch (dev->devfn) {
 	case 0x10:
 		dev->irq = PIC_EHCI_0_IRQ;
diff --git a/arch/mips/netlogic/xlp/wakeup.c b/arch/mips/netlogic/xlp/wakeup.c
index abb3e08cc05..0cce37cbffe 100644
--- a/arch/mips/netlogic/xlp/wakeup.c
+++ b/arch/mips/netlogic/xlp/wakeup.c
@@ -77,12 +77,28 @@ static int xlp_wakeup_core(uint64_t sysbase, int node, int core)
 	return count != 0;
 }
 
+static int wait_for_cpus(int cpu, int bootcpu)
+{
+	volatile uint32_t *cpu_ready = nlm_get_boot_data(BOOT_CPU_READY);
+	int i, count, notready;
+
+	count = 0x20000000;
+	do {
+		notready = nlm_threads_per_core;
+		for (i = 0; i < nlm_threads_per_core; i++)
+			if (cpu_ready[cpu + i] || cpu == bootcpu)
+				--notready;
+	} while (notready != 0 && --count > 0);
+
+	return count != 0;
+}
+
 static void xlp_enable_secondary_cores(const cpumask_t *wakeup_mask)
 {
 	struct nlm_soc_info *nodep;
 	uint64_t syspcibase;
 	uint32_t syscoremask;
-	int core, n, cpu, count, val;
+	int core, n, cpu;
 
 	for (n = 0; n < NLM_NR_NODES; n++) {
 		syspcibase = nlm_get_sys_pcibase(n);
@@ -122,11 +138,8 @@ static void xlp_enable_secondary_cores(const cpumask_t *wakeup_mask)
 			/* core is up */
 			nodep->coremask |= 1u << core;
 
-			/* spin until the first hw thread sets its ready */
-			count = 0x20000000;
-			do {
-				val = *(volatile int *)&nlm_cpu_ready[cpu];
-			} while (val == 0 && --count > 0);
+			/* spin until the hw threads sets their ready */
+			wait_for_cpus(cpu, 0);
 		}
 	}
 }
@@ -138,6 +151,7 @@ void xlp_wakeup_secondary_cpus()
 	 * first wakeup core 0 threads
 	 */
 	xlp_boot_core0_siblings();
+	wait_for_cpus(0, 0);
 
 	/* now get other cores out of reset */
 	xlp_enable_secondary_cores(&nlm_cpumask);
diff --git a/arch/mips/netlogic/xlr/fmn.c b/arch/mips/netlogic/xlr/fmn.c
index 4d74f03de50..d428e8471ee 100644
--- a/arch/mips/netlogic/xlr/fmn.c
+++ b/arch/mips/netlogic/xlr/fmn.c
@@ -74,13 +74,13 @@ static irqreturn_t fmn_message_handler(int irq, void *data)
 	struct nlm_fmn_msg msg;
 	uint32_t mflags, bkt_status;
 
-	mflags = nlm_cop2_enable();
+	mflags = nlm_cop2_enable_irqsave();
 	/* Disable message ring interrupt */
 	nlm_fmn_setup_intr(irq, 0);
 	while (1) {
 		/* 8 bkts per core, [24:31] each bit represents one bucket
 		 * Bit is Zero if bucket is not empty */
-		bkt_status = (nlm_read_c2_status() >> 24) & 0xff;
+		bkt_status = (nlm_read_c2_status0() >> 24) & 0xff;
 		if (bkt_status == 0xff)
 			break;
 		for (bucket = 0; bucket < 8; bucket++) {
@@ -97,16 +97,16 @@ static irqreturn_t fmn_message_handler(int irq, void *data)
 				pr_warn("No msgring handler for stnid %d\n",
 						src_stnid);
 			else {
-				nlm_cop2_restore(mflags);
+				nlm_cop2_disable_irqrestore(mflags);
 				hndlr->action(bucket, src_stnid, size, code,
 					&msg, hndlr->arg);
-				mflags = nlm_cop2_enable();
+				mflags = nlm_cop2_enable_irqsave();
 			}
 		}
 	};
 	/* Enable message ring intr, to any thread in core */
 	nlm_fmn_setup_intr(irq, (1 << nlm_threads_per_core) - 1);
-	nlm_cop2_restore(mflags);
+	nlm_cop2_disable_irqrestore(mflags);
 	return IRQ_HANDLED;
 }
 
@@ -128,7 +128,7 @@ void xlr_percpu_fmn_init(void)
 
 	bucket_sizes = xlr_board_fmn_config.bucket_size;
 	cpu_fmn_info = &xlr_board_fmn_config.cpu[id];
-	flags = nlm_cop2_enable();
+	flags = nlm_cop2_enable_irqsave();
 
 	/* Setup bucket sizes for the core. */
 	nlm_write_c2_bucksize(0, bucket_sizes[id * 8 + 0]);
@@ -166,7 +166,7 @@ void xlr_percpu_fmn_init(void)
 
 	/* enable FMN interrupts on this CPU */
 	nlm_fmn_setup_intr(IRQ_FMN, (1 << nlm_threads_per_core) - 1);
-	nlm_cop2_restore(flags);
+	nlm_cop2_disable_irqrestore(flags);
 }
 
 
@@ -198,7 +198,7 @@ void nlm_setup_fmn_irq(void)
 	/* setup irq only once */
 	setup_irq(IRQ_FMN, &fmn_irqaction);
 
-	flags = nlm_cop2_enable();
+	flags = nlm_cop2_enable_irqsave();
 	nlm_fmn_setup_intr(IRQ_FMN, (1 << nlm_threads_per_core) - 1);
-	nlm_cop2_restore(flags);
+	nlm_cop2_disable_irqrestore(flags);
 }
diff --git a/arch/mips/netlogic/xlr/setup.c b/arch/mips/netlogic/xlr/setup.c
index 89c8c106663..214d123b79f 100644
--- a/arch/mips/netlogic/xlr/setup.c
+++ b/arch/mips/netlogic/xlr/setup.c
@@ -196,6 +196,7 @@ void __init prom_init(void)
 {
 	int *argv, *envp;		/* passed as 32 bit ptrs */
 	struct psb_info *prom_infop;
+	void *reset_vec;
 #ifdef CONFIG_SMP
 	int i;
 #endif
@@ -208,6 +209,12 @@ void __init prom_init(void)
 	nlm_prom_info = *prom_infop;
 	nlm_init_node();
 
+	/* Update reset entry point with CPU init code */
+	reset_vec = (void *)CKSEG1ADDR(RESET_VEC_PHYS);
+	memset(reset_vec, 0, RESET_VEC_SIZE);
+	memcpy(reset_vec, (void *)nlm_reset_entry,
+			(nlm_reset_entry_end - nlm_reset_entry));
+
 	nlm_early_serial_setup();
 	build_arcs_cmdline(argv);
 	prom_add_memory();
diff --git a/arch/mips/netlogic/xlr/wakeup.c b/arch/mips/netlogic/xlr/wakeup.c
index 3ebf7411d67..9fb81fa6272 100644
--- a/arch/mips/netlogic/xlr/wakeup.c
+++ b/arch/mips/netlogic/xlr/wakeup.c
@@ -49,10 +49,11 @@
 #include <asm/netlogic/xlr/iomap.h>
 #include <asm/netlogic/xlr/pic.h>
 
-int __cpuinit xlr_wakeup_secondary_cpus(void)
+int xlr_wakeup_secondary_cpus(void)
 {
 	struct nlm_soc_info *nodep;
 	unsigned int i, j, boot_cpu;
+	volatile u32 *cpu_ready = nlm_get_boot_data(BOOT_CPU_READY);
 
 	/*
 	 *  In case of RMI boot, hit with NMI to get the cores
@@ -71,7 +72,7 @@ int __cpuinit xlr_wakeup_secondary_cpus(void)
 	nodep->coremask = 1;
 	for (i = 1; i < NLM_CORES_PER_NODE; i++) {
 		for (j = 1000000; j > 0; j--) {
-			if (nlm_cpu_ready[i * NLM_THREADS_PER_CORE])
+			if (cpu_ready[i * NLM_THREADS_PER_CORE])
 				break;
 			udelay(10);
 		}