Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:

 o Add basic support for the Mediatek/Ralink Wireless SoC family.

 o The Qualcomm Atheros platform is extended by support for the new
   QCA955X SoC series as well as a bunch of patches that get the code
   ready for OF support.

 o Lantiq and BCM47XX platform have a few improvements and bug fixes.

 o MIPS has sent a few patches that get the kernel ready for the
   upcoming microMIPS support.

 o The rest of the series is made up of small bug fixes and cleanups
   that relate to various parts of the MIPS code.  The biggy in there is
   a whitespace cleanup.  After I was sent another set of whitespace
   cleanup patches I decided it was the time to clean the whitespace
   "issues" for once and and that touches many files below arch/mips/.

Fix up silly conflicts, mostly due to whitespace cleanups.

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (105 commits)
  MIPS: Quit exporting kernel internel break codes to uapi/asm/break.h
  MIPS: remove broken conditional inside vpe loader code
  MIPS: SMTC: fix implicit declaration of set_vi_handler
  MIPS: early_printk: drop __init annotations
  MIPS: Probe for and report hardware virtualization support.
  MIPS: ath79: add support for the Qualcomm Atheros AP136-010 board
  MIPS: ath79: add USB controller registration code for the QCA955X SoCs
  MIPS: ath79: add PCI controller registration code for the QCA955X SoCs
  MIPS: ath79: add WMAC registration code for the QCA955X SoCs
  MIPS: ath79: register UART for the QCA955X SoCs
  MIPS: ath79: add QCA955X specific glue to ath79_device_reset_{set, clear}
  MIPS: ath79: add GPIO setup code for the QCA955X SoCs
  MIPS: ath79: add IRQ handling code for the QCA955X SoCs
  MIPS: ath79: add clock setup code for the QCA955X SoCs
  MIPS: ath79: add SoC detection code for the QCA955X SoCs
  MIPS: ath79: add early printk support for the QCA955X SoCs
  MIPS: ath79: fix WMAC IRQ resource assignment
  mips: reserve elfcorehdr
  mips: Make sure kernel memory is in iomem
  MIPS: ath79: use dynamically allocated USB platform devices
  ...

3 files changed, 30 insertions, 25 deletions

diff --git a/arch/mips/oprofile/common.c b/arch/mips/oprofile/common.c
index e32db1ff02c..af763e838fd 100644
--- a/arch/mips/oprofile/common.c
+++ b/arch/mips/oprofile/common.c
@@ -27,10 +27,10 @@ static int op_mips_setup(void)
 	/* Pre-compute the values to stuff in the hardware registers.  */
 	model->reg_setup(ctr);
 
-	/* Configure the registers on all cpus.  */
+	/* Configure the registers on all cpus.	 */
 	on_each_cpu(model->cpu_setup, NULL, 1);
 
-        return 0;
+	return 0;
 }
 
 static int op_mips_create_files(struct super_block *sb, struct dentry *root)
@@ -78,6 +78,7 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
 	switch (current_cpu_type()) {
 	case CPU_5KC:
 	case CPU_M14KC:
+	case CPU_M14KEC:
 	case CPU_20KC:
 	case CPU_24K:
 	case CPU_25KF:
@@ -110,7 +111,7 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
 
 	ops->create_files	= op_mips_create_files;
 	ops->setup		= op_mips_setup;
-	//ops->shutdown         = op_mips_shutdown;
+	//ops->shutdown		= op_mips_shutdown;
 	ops->start		= op_mips_start;
 	ops->stop		= op_mips_stop;
 	ops->cpu_type		= lmodel->cpu_type;
diff --git a/arch/mips/oprofile/op_model_loongson2.c b/arch/mips/oprofile/op_model_loongson2.c
index 60d3ea60211..b249ec0bebb 100644
--- a/arch/mips/oprofile/op_model_loongson2.c
+++ b/arch/mips/oprofile/op_model_loongson2.c
@@ -18,13 +18,13 @@
 
 #define LOONGSON2_CPU_TYPE	"mips/loongson2"
 
-#define LOONGSON2_PERFCNT_OVERFLOW		(1ULL   << 31)
+#define LOONGSON2_PERFCNT_OVERFLOW		(1ULL	<< 31)
 
 #define LOONGSON2_PERFCTRL_EXL			(1UL	<<  0)
-#define LOONGSON2_PERFCTRL_KERNEL		(1UL    <<  1)
-#define LOONGSON2_PERFCTRL_SUPERVISOR		(1UL    <<  2)
-#define LOONGSON2_PERFCTRL_USER			(1UL    <<  3)
-#define LOONGSON2_PERFCTRL_ENABLE		(1UL    <<  4)
+#define LOONGSON2_PERFCTRL_KERNEL		(1UL	<<  1)
+#define LOONGSON2_PERFCTRL_SUPERVISOR		(1UL	<<  2)
+#define LOONGSON2_PERFCTRL_USER			(1UL	<<  3)
+#define LOONGSON2_PERFCTRL_ENABLE		(1UL	<<  4)
 #define LOONGSON2_PERFCTRL_EVENT(idx, event) \
 	(((event) & 0x0f) << ((idx) ? 9 : 5))
 
diff --git a/arch/mips/oprofile/op_model_mipsxx.c b/arch/mips/oprofile/op_model_mipsxx.c
index 78625463040..1fd361462c0 100644
--- a/arch/mips/oprofile/op_model_mipsxx.c
+++ b/arch/mips/oprofile/op_model_mipsxx.c
@@ -14,25 +14,25 @@
 
 #include "op_impl.h"
 
-#define M_PERFCTL_EXL			(1UL      <<  0)
-#define M_PERFCTL_KERNEL		(1UL      <<  1)
-#define M_PERFCTL_SUPERVISOR		(1UL      <<  2)
-#define M_PERFCTL_USER			(1UL      <<  3)
-#define M_PERFCTL_INTERRUPT_ENABLE	(1UL      <<  4)
+#define M_PERFCTL_EXL			(1UL	  <<  0)
+#define M_PERFCTL_KERNEL		(1UL	  <<  1)
+#define M_PERFCTL_SUPERVISOR		(1UL	  <<  2)
+#define M_PERFCTL_USER			(1UL	  <<  3)
+#define M_PERFCTL_INTERRUPT_ENABLE	(1UL	  <<  4)
 #define M_PERFCTL_EVENT(event)		(((event) & 0x3ff)  << 5)
-#define M_PERFCTL_VPEID(vpe)		((vpe)    << 16)
+#define M_PERFCTL_VPEID(vpe)		((vpe)	  << 16)
 #define M_PERFCTL_MT_EN(filter)		((filter) << 20)
-#define    M_TC_EN_ALL			M_PERFCTL_MT_EN(0)
-#define    M_TC_EN_VPE			M_PERFCTL_MT_EN(1)
-#define    M_TC_EN_TC			M_PERFCTL_MT_EN(2)
-#define M_PERFCTL_TCID(tcid)		((tcid)   << 22)
-#define M_PERFCTL_WIDE			(1UL      << 30)
-#define M_PERFCTL_MORE			(1UL      << 31)
+#define	   M_TC_EN_ALL			M_PERFCTL_MT_EN(0)
+#define	   M_TC_EN_VPE			M_PERFCTL_MT_EN(1)
+#define	   M_TC_EN_TC			M_PERFCTL_MT_EN(2)
+#define M_PERFCTL_TCID(tcid)		((tcid)	  << 22)
+#define M_PERFCTL_WIDE			(1UL	  << 30)
+#define M_PERFCTL_MORE			(1UL	  << 31)
 
-#define M_COUNTER_OVERFLOW		(1UL      << 31)
+#define M_COUNTER_OVERFLOW		(1UL	  << 31)
 
 /* Netlogic XLR specific, count events in all threads in a core */
-#define M_PERFCTL_COUNT_ALL_THREADS	(1UL      << 13)
+#define M_PERFCTL_COUNT_ALL_THREADS	(1UL	  << 13)
 
 static int (*save_perf_irq)(void);
 
@@ -143,7 +143,7 @@ static struct mipsxx_register_config {
 	unsigned int counter[4];
 } reg;
 
-/* Compute all of the registers in preparation for enabling profiling.  */
+/* Compute all of the registers in preparation for enabling profiling.	*/
 
 static void mipsxx_reg_setup(struct op_counter_config *ctr)
 {
@@ -159,7 +159,7 @@ static void mipsxx_reg_setup(struct op_counter_config *ctr)
 			continue;
 
 		reg.control[i] = M_PERFCTL_EVENT(ctr[i].event) |
-		                 M_PERFCTL_INTERRUPT_ENABLE;
+				 M_PERFCTL_INTERRUPT_ENABLE;
 		if (ctr[i].kernel)
 			reg.control[i] |= M_PERFCTL_KERNEL;
 		if (ctr[i].user)
@@ -172,7 +172,7 @@ static void mipsxx_reg_setup(struct op_counter_config *ctr)
 	}
 }
 
-/* Program all of the registers in preparation for enabling profiling.  */
+/* Program all of the registers in preparation for enabling profiling.	*/
 
 static void mipsxx_cpu_setup(void *args)
 {
@@ -351,6 +351,10 @@ static int __init mipsxx_init(void)
 		op_model_mipsxx_ops.cpu_type = "mips/M14Kc";
 		break;
 
+	case CPU_M14KEC:
+		op_model_mipsxx_ops.cpu_type = "mips/M14KEc";
+		break;
+
 	case CPU_20KC:
 		op_model_mipsxx_ops.cpu_type = "mips/20K";
 		break;