[MIPS] New files for lemote fulong mini-PC support

Signed-off-by: Fuxin Zhang <zhangfx@lemote.com>
Signed-off-by: Songmao Tian <tiansm@lemote.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

1 files changed, 33 insertions, 55 deletions

diff --git a/arch/mips/pci/ops-bonito64.c b/arch/mips/pci/ops-bonito64.c
index dc35270b65a..f742c51acf0 100644
--- a/arch/mips/pci/ops-bonito64.c
+++ b/arch/mips/pci/ops-bonito64.c
@@ -29,83 +29,60 @@
 #define PCI_ACCESS_READ  0
 #define PCI_ACCESS_WRITE 1
 
-/*
- *  PCI configuration cycle AD bus definition
- */
-/* Type 0 */
-#define PCI_CFG_TYPE0_REG_SHF           0
-#define PCI_CFG_TYPE0_FUNC_SHF          8
+#ifdef CONFIG_LEMOTE_FULONG
+#define CFG_SPACE_REG(offset) (void *)CKSEG1ADDR(BONITO_PCICFG_BASE | (offset))
+#define ID_SEL_BEGIN 11
+#else
+#define CFG_SPACE_REG(offset) (void *)CKSEG1ADDR(_pcictrl_bonito_pcicfg + (offset))
+#define ID_SEL_BEGIN 10
+#endif
+#define MAX_DEV_NUM (31 - ID_SEL_BEGIN)
 
-/* Type 1 */
-#define PCI_CFG_TYPE1_REG_SHF           0
-#define PCI_CFG_TYPE1_FUNC_SHF          8
-#define PCI_CFG_TYPE1_DEV_SHF           11
-#define PCI_CFG_TYPE1_BUS_SHF           16
 
 static int bonito64_pcibios_config_access(unsigned char access_type,
 				      struct pci_bus *bus,
 				      unsigned int devfn, int where,
 				      u32 * data)
 {
-	unsigned char busnum = bus->number;
+	u32 busnum = bus->number;
+	u32 addr, type;
 	u32 dummy;
-	u64 pci_addr;
-
-	/* Algorithmics Bonito64 system controller. */
+	void *addrp;
+	int device = PCI_SLOT(devfn);
+	int function = PCI_FUNC(devfn);
+	int reg = where & ~3;
 
-	if ((busnum == 0) && (PCI_SLOT(devfn) > 21)) {
-		/* We number bus 0 devices from 0..21 */
-		return -1;
-	}
-
-	/* Clear cause register bits */
-	BONITO_PCICMD |= (BONITO_PCICMD_MABORT_CLR |
-			  BONITO_PCICMD_MTABORT_CLR);
-
-	/*
-	 * Setup pattern to be used as PCI "address" for
-	 * Type 0 cycle
-	 */
 	if (busnum == 0) {
-		/* IDSEL */
-		pci_addr = (u64) 1 << (PCI_SLOT(devfn) + 10);
-	} else {
-		/* Bus number */
-		pci_addr = busnum << PCI_CFG_TYPE1_BUS_SHF;
-
-		/* Device number */
-		pci_addr |=
-		    PCI_SLOT(devfn) << PCI_CFG_TYPE1_DEV_SHF;
-	}
-
-	/* Function (same for Type 0/1) */
-	pci_addr |= PCI_FUNC(devfn) << PCI_CFG_TYPE0_FUNC_SHF;
-
-	/* Register number (same for Type 0/1) */
-	pci_addr |= (where & ~0x3) << PCI_CFG_TYPE0_REG_SHF;
+		/* Type 0 configuration for onboard PCI bus */
+		if (device > MAX_DEV_NUM)
+			return -1;
 
-	if (busnum == 0) {
-		/* Type 0 */
-		BONITO_PCIMAP_CFG = pci_addr >> 16;
+		addr = (1 << (device + ID_SEL_BEGIN)) | (function << 8) | reg;
+		type = 0;
 	} else {
-		/* Type 1 */
-		BONITO_PCIMAP_CFG = (pci_addr >> 16) | 0x10000;
+		/* Type 1 configuration for offboard PCI bus */
+		addr = (busnum << 16) | (device << 11) | (function << 8) | reg;
+		type = 0x10000;
 	}
 
-	pci_addr &= 0xffff;
+	/* Clear aborts */
+	BONITO_PCICMD |= BONITO_PCICMD_MABORT_CLR | BONITO_PCICMD_MTABORT_CLR;
+
+	BONITO_PCIMAP_CFG = (addr >> 16) | type;
 
 	/* Flush Bonito register block */
 	dummy = BONITO_PCIMAP_CFG;
-	iob();		/* sync */
+	mmiowb();
 
-	/* Perform access */
+	addrp = CFG_SPACE_REG(addr & 0xffff);
 	if (access_type == PCI_ACCESS_WRITE) {
-		*(volatile u32 *) (_pcictrl_bonito_pcicfg + (u32)pci_addr) = *(u32 *) data;
-
+		writel(cpu_to_le32(*data), addrp);
+#ifndef CONFIG_LEMOTE_FULONG
 		/* Wait till done */
 		while (BONITO_PCIMSTAT & 0xF);
+#endif
 	} else {
-		*(u32 *) data = *(volatile u32 *) (_pcictrl_bonito_pcicfg + (u32)pci_addr);
+		*data = le32_to_cpu(readl(addrp));
 	}
 
 	/* Detect Master/Target abort */
@@ -121,6 +98,7 @@ static int bonito64_pcibios_config_access(unsigned char access_type,
 	}
 
 	return 0;
+
 }