Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 292 insertions, 0 deletions

diff --git a/arch/mips/pci/pci-sb1250.c b/arch/mips/pci/pci-sb1250.c
new file mode 100644
index 00000000000..7cca3bde59b
--- /dev/null
+++ b/arch/mips/pci/pci-sb1250.c
@@ -0,0 +1,292 @@
+/*
+ * Copyright (C) 2001,2002,2003 Broadcom Corporation
+ * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+/*
+ * BCM1250-specific PCI support
+ *
+ * This module provides the glue between Linux's PCI subsystem
+ * and the hardware.  We basically provide glue for accessing
+ * configuration space, and set up the translation for I/O
+ * space accesses.
+ *
+ * To access configuration space, we use ioremap.  In the 32-bit
+ * kernel, this consumes either 4 or 8 page table pages, and 16MB of
+ * kernel mapped memory.  Hopefully neither of these should be a huge
+ * problem.
+ */
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/console.h>
+#include <linux/tty.h>
+
+#include <asm/io.h>
+
+#include <asm/sibyte/sb1250_defs.h>
+#include <asm/sibyte/sb1250_regs.h>
+#include <asm/sibyte/sb1250_scd.h>
+#include <asm/sibyte/board.h>
+
+/*
+ * Macros for calculating offsets into config space given a device
+ * structure or dev/fun/reg
+ */
+#define CFGOFFSET(bus,devfn,where) (((bus)<<16) + ((devfn)<<8) + (where))
+#define CFGADDR(bus,devfn,where)   CFGOFFSET((bus)->number,(devfn),where)
+
+static void *cfg_space;
+
+#define PCI_BUS_ENABLED	1
+#define LDT_BUS_ENABLED	2
+#define PCI_DEVICE_MODE	4
+
+static int sb1250_bus_status = 0;
+
+#define PCI_BRIDGE_DEVICE  0
+#define LDT_BRIDGE_DEVICE  1
+
+#ifdef CONFIG_SIBYTE_HAS_LDT
+/*
+ * HT's level-sensitive interrupts require EOI, which is generated
+ * through a 4MB memory-mapped region
+ */
+unsigned long ldt_eoi_space;
+#endif
+
+/*
+ * Read/write 32-bit values in config space.
+ */
+static inline u32 READCFG32(u32 addr)
+{
+	return *(u32 *) (cfg_space + (addr & ~3));
+}
+
+static inline void WRITECFG32(u32 addr, u32 data)
+{
+	*(u32 *) (cfg_space + (addr & ~3)) = data;
+}
+
+int pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	return dev->irq;
+}
+
+/* Do platform specific device initialization at pci_enable_device() time */
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+	return 0;
+}
+
+/*
+ * Some checks before doing config cycles:
+ * In PCI Device Mode, hide everything on bus 0 except the LDT host
+ * bridge.  Otherwise, access is controlled by bridge MasterEn bits.
+ */
+static int sb1250_pci_can_access(struct pci_bus *bus, int devfn)
+{
+	u32 devno;
+
+	if (!(sb1250_bus_status & (PCI_BUS_ENABLED | PCI_DEVICE_MODE)))
+		return 0;
+
+	if (bus->number == 0) {
+		devno = PCI_SLOT(devfn);
+		if (devno == LDT_BRIDGE_DEVICE)
+			return (sb1250_bus_status & LDT_BUS_ENABLED) != 0;
+		else if (sb1250_bus_status & PCI_DEVICE_MODE)
+			return 0;
+		else
+			return 1;
+	} else
+		return 1;
+}
+
+/*
+ * Read/write access functions for various sizes of values
+ * in config space.  Return all 1's for disallowed accesses
+ * for a kludgy but adequate simulation of master aborts.
+ */
+
+static int sb1250_pcibios_read(struct pci_bus *bus, unsigned int devfn,
+			       int where, int size, u32 * val)
+{
+	u32 data = 0;
+
+	if ((size == 2) && (where & 1))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+	else if ((size == 4) && (where & 3))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+
+	if (sb1250_pci_can_access(bus, devfn))
+		data = READCFG32(CFGADDR(bus, devfn, where));
+	else
+		data = 0xFFFFFFFF;
+
+	if (size == 1)
+		*val = (data >> ((where & 3) << 3)) & 0xff;
+	else if (size == 2)
+		*val = (data >> ((where & 3) << 3)) & 0xffff;
+	else
+		*val = data;
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int sb1250_pcibios_write(struct pci_bus *bus, unsigned int devfn,
+				int where, int size, u32 val)
+{
+	u32 cfgaddr = CFGADDR(bus, devfn, where);
+	u32 data = 0;
+
+	if ((size == 2) && (where & 1))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+	else if ((size == 4) && (where & 3))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+
+	if (!sb1250_pci_can_access(bus, devfn))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+
+	data = READCFG32(cfgaddr);
+
+	if (size == 1)
+		data = (data & ~(0xff << ((where & 3) << 3))) |
+		    (val << ((where & 3) << 3));
+	else if (size == 2)
+		data = (data & ~(0xffff << ((where & 3) << 3))) |
+		    (val << ((where & 3) << 3));
+	else
+		data = val;
+
+	WRITECFG32(cfgaddr, data);
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+struct pci_ops sb1250_pci_ops = {
+	.read	= sb1250_pcibios_read,
+	.write	= sb1250_pcibios_write,
+};
+
+static struct resource sb1250_mem_resource = {
+	.name	= "SB1250 PCI MEM",
+	.start	= 0x40000000UL,
+	.end	= 0x5fffffffUL,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct resource sb1250_io_resource = {
+	.name	= "SB1250 PCI I/O",
+	.start	= 0x00000000UL,
+	.end	= 0x01ffffffUL,
+	.flags	= IORESOURCE_IO,
+};
+
+struct pci_controller sb1250_controller = {
+	.pci_ops	= &sb1250_pci_ops,
+	.mem_resource	= &sb1250_mem_resource,
+	.io_resource	= &sb1250_io_resource,
+};
+
+static int __init sb1250_pcibios_init(void)
+{
+	uint32_t cmdreg;
+	uint64_t reg;
+	extern int pci_probe_only;
+
+	/* CFE will assign PCI resources */
+	pci_probe_only = 1;
+
+	/* Avoid ISA compat ranges.  */
+	PCIBIOS_MIN_IO = 0x00008000UL;
+	PCIBIOS_MIN_MEM = 0x01000000UL;
+
+	/* Set I/O resource limits.  */
+	ioport_resource.end = 0x01ffffffUL;	/* 32MB accessible by sb1250 */
+	iomem_resource.end = 0xffffffffUL;	/* no HT support yet */
+
+	cfg_space =
+	    ioremap(A_PHYS_LDTPCI_CFG_MATCH_BITS, 16 * 1024 * 1024);
+
+	/*
+	 * See if the PCI bus has been configured by the firmware.
+	 */
+	reg = *((volatile uint64_t *) IOADDR(A_SCD_SYSTEM_CFG));
+	if (!(reg & M_SYS_PCI_HOST)) {
+		sb1250_bus_status |= PCI_DEVICE_MODE;
+	} else {
+		cmdreg =
+		    READCFG32(CFGOFFSET
+			      (0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0),
+			       PCI_COMMAND));
+		if (!(cmdreg & PCI_COMMAND_MASTER)) {
+			printk
+			    ("PCI: Skipping PCI probe.  Bus is not initialized.\n");
+			iounmap(cfg_space);
+			return 0;
+		}
+		sb1250_bus_status |= PCI_BUS_ENABLED;
+	}
+
+	/*
+	 * Establish mappings in KSEG2 (kernel virtual) to PCI I/O
+	 * space.  Use "match bytes" policy to make everything look
+	 * little-endian.  So, you need to also set
+	 * CONFIG_SWAP_IO_SPACE, but this is the combination that
+	 * works correctly with most of Linux's drivers.
+	 * XXX ehs: Should this happen in PCI Device mode?
+	 */
+
+	set_io_port_base((unsigned long)
+			 ioremap(A_PHYS_LDTPCI_IO_MATCH_BYTES, 65536));
+	isa_slot_offset = (unsigned long)
+	    ioremap(A_PHYS_LDTPCI_IO_MATCH_BYTES_32, 1024 * 1024);
+
+#ifdef CONFIG_SIBYTE_HAS_LDT
+	/*
+	 * Also check the LDT bridge's enable, just in case we didn't
+	 * initialize that one.
+	 */
+
+	cmdreg = READCFG32(CFGOFFSET(0, PCI_DEVFN(LDT_BRIDGE_DEVICE, 0),
+				     PCI_COMMAND));
+	if (cmdreg & PCI_COMMAND_MASTER) {
+		sb1250_bus_status |= LDT_BUS_ENABLED;
+
+		/*
+		 * Need bits 23:16 to convey vector number.  Note that
+		 * this consumes 4MB of kernel-mapped memory
+		 * (Kseg2/Kseg3) for 32-bit kernel.
+		 */
+		ldt_eoi_space = (unsigned long)
+		    ioremap(A_PHYS_LDT_SPECIAL_MATCH_BYTES,
+			    4 * 1024 * 1024);
+	}
+#endif
+
+	register_pci_controller(&sb1250_controller);
+
+#ifdef CONFIG_VGA_CONSOLE
+	take_over_console(&vga_con, 0, MAX_NR_CONSOLES - 1, 1);
+#endif
+	return 0;
+}
+arch_initcall(sb1250_pcibios_init);