Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:

 o Add basic support for the Mediatek/Ralink Wireless SoC family.

 o The Qualcomm Atheros platform is extended by support for the new
   QCA955X SoC series as well as a bunch of patches that get the code
   ready for OF support.

 o Lantiq and BCM47XX platform have a few improvements and bug fixes.

 o MIPS has sent a few patches that get the kernel ready for the
   upcoming microMIPS support.

 o The rest of the series is made up of small bug fixes and cleanups
   that relate to various parts of the MIPS code.  The biggy in there is
   a whitespace cleanup.  After I was sent another set of whitespace
   cleanup patches I decided it was the time to clean the whitespace
   "issues" for once and and that touches many files below arch/mips/.

Fix up silly conflicts, mostly due to whitespace cleanups.

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (105 commits)
  MIPS: Quit exporting kernel internel break codes to uapi/asm/break.h
  MIPS: remove broken conditional inside vpe loader code
  MIPS: SMTC: fix implicit declaration of set_vi_handler
  MIPS: early_printk: drop __init annotations
  MIPS: Probe for and report hardware virtualization support.
  MIPS: ath79: add support for the Qualcomm Atheros AP136-010 board
  MIPS: ath79: add USB controller registration code for the QCA955X SoCs
  MIPS: ath79: add PCI controller registration code for the QCA955X SoCs
  MIPS: ath79: add WMAC registration code for the QCA955X SoCs
  MIPS: ath79: register UART for the QCA955X SoCs
  MIPS: ath79: add QCA955X specific glue to ath79_device_reset_{set, clear}
  MIPS: ath79: add GPIO setup code for the QCA955X SoCs
  MIPS: ath79: add IRQ handling code for the QCA955X SoCs
  MIPS: ath79: add clock setup code for the QCA955X SoCs
  MIPS: ath79: add SoC detection code for the QCA955X SoCs
  MIPS: ath79: add early printk support for the QCA955X SoCs
  MIPS: ath79: fix WMAC IRQ resource assignment
  mips: reserve elfcorehdr
  mips: Make sure kernel memory is in iomem
  MIPS: ath79: use dynamically allocated USB platform devices
  ...

1 files changed, 8 insertions, 8 deletions

diff --git a/arch/mips/sgi-ip22/ip22-nvram.c b/arch/mips/sgi-ip22/ip22-nvram.c
index 0177566475d..e077036a676 100644
--- a/arch/mips/sgi-ip22/ip22-nvram.c
+++ b/arch/mips/sgi-ip22/ip22-nvram.c
@@ -14,11 +14,11 @@
 #define EEPROM_WRITE	0xa000	/* serial memory write */
 #define EEPROM_WRALL	0x8800	/* write all registers */
 #define EEPROM_WDS	0x8000	/* disable all programming */
-#define	EEPROM_PRREAD	0xc000	/* read protect register */
-#define	EEPROM_PREN	0x9800	/* enable protect register mode */
-#define	EEPROM_PRCLEAR	0xffff	/* clear protect register */
-#define	EEPROM_PRWRITE	0xa000	/* write protect register */
-#define	EEPROM_PRDS	0x8000	/* disable protect register, forever */
+#define EEPROM_PRREAD	0xc000	/* read protect register */
+#define EEPROM_PREN	0x9800	/* enable protect register mode */
+#define EEPROM_PRCLEAR	0xffff	/* clear protect register */
+#define EEPROM_PRWRITE	0xa000	/* write protect register */
+#define EEPROM_PRDS	0x8000	/* disable protect register, forever */
 
 #define EEPROM_EPROT	0x01	/* Protect register enable */
 #define EEPROM_CSEL	0x02	/* Chip select */
@@ -27,7 +27,7 @@
 #define EEPROM_DATI	0x10	/* Data in */
 
 /* We need to use these functions early... */
-#define delay()	({						\
+#define delay() ({						\
 	int x;							\
 	for (x=0; x<100000; x++) __asm__ __volatile__(""); })
 
@@ -35,7 +35,7 @@
 	__raw_writel(__raw_readl(ptr) & ~EEPROM_DATO, ptr);	\
 	__raw_writel(__raw_readl(ptr) & ~EEPROM_ECLK, ptr);	\
 	__raw_writel(__raw_readl(ptr) & ~EEPROM_EPROT, ptr);	\
-	delay();		                                \
+	delay();						\
 	__raw_writel(__raw_readl(ptr) | EEPROM_CSEL, ptr);	\
 	__raw_writel(__raw_readl(ptr) | EEPROM_ECLK, ptr); })
 
@@ -46,7 +46,7 @@
 	__raw_writel(__raw_readl(ptr) | EEPROM_EPROT, ptr);	\
 	__raw_writel(__raw_readl(ptr) | EEPROM_ECLK, ptr); })
 
-#define	BITS_IN_COMMAND	11
+#define BITS_IN_COMMAND 11
 /*
  * clock in the nvram command and the register number. For the
  * national semiconductor nv ram chip the op code is 3 bits and