summaryrefslogtreecommitdiffstats
path: root/arch/mips/sgi-ip22
diff options
context:
space:
mode:
authorRalf Baechle <ralf@linux-mips.org>2006-04-03 17:56:36 +0100
committerRalf Baechle <ralf@linux-mips.org>2006-04-19 04:14:21 +0200
commite4ac58afdfac792c0583af30dbd9eae53e24c78b (patch)
tree7517bef2c515fc630e4d3d238867b91cde96f558 /arch/mips/sgi-ip22
parentd35d473c25d43d7db3e5e18b66d558d2a631cca8 (diff)
[MIPS] Rewrite all the assembler interrupt handlers to C.
Saves like 1,600 lines of code, is way easier to debug, compilers frequently do a better job than the cut and paste type of handlers many boards had. And finally having all the stuff done in a single place also means alot of bug potencial for the MT ASE is gone. The only surviving handler in assembler is the DECstation one; I hope Maciej will rewrite it. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Diffstat (limited to 'arch/mips/sgi-ip22')
-rw-r--r--arch/mips/sgi-ip22/Makefile2
-rw-r--r--arch/mips/sgi-ip22/ip22-int.c59
-rw-r--r--arch/mips/sgi-ip22/ip22-irq.S118
3 files changed, 54 insertions, 125 deletions
diff --git a/arch/mips/sgi-ip22/Makefile b/arch/mips/sgi-ip22/Makefile
index eb0820fe50b..6aa4c0cd169 100644
--- a/arch/mips/sgi-ip22/Makefile
+++ b/arch/mips/sgi-ip22/Makefile
@@ -3,7 +3,7 @@
# under Linux.
#
-obj-y += ip22-mc.o ip22-hpc.o ip22-int.o ip22-irq.o ip22-berr.o \
+obj-y += ip22-mc.o ip22-hpc.o ip22-int.o ip22-berr.o \
ip22-time.o ip22-nvram.o ip22-reset.o ip22-setup.o
obj-$(CONFIG_EISA) += ip22-eisa.o
diff --git a/arch/mips/sgi-ip22/ip22-int.c b/arch/mips/sgi-ip22/ip22-int.c
index d16fb43b1a9..fc6a7e2b189 100644
--- a/arch/mips/sgi-ip22/ip22-int.c
+++ b/arch/mips/sgi-ip22/ip22-int.c
@@ -37,7 +37,6 @@ static char lc1msk_to_irqnr[256];
static char lc2msk_to_irqnr[256];
static char lc3msk_to_irqnr[256];
-extern asmlinkage void indyIRQ(void);
extern int ip22_eisa_init(void);
static void enable_local0_irq(unsigned int irq)
@@ -224,7 +223,7 @@ static struct hw_interrupt_type ip22_local3_irq_type = {
.end = end_local3_irq,
};
-void indy_local0_irqdispatch(struct pt_regs *regs)
+static void indy_local0_irqdispatch(struct pt_regs *regs)
{
u8 mask = sgint->istat0 & sgint->imask0;
u8 mask2;
@@ -242,7 +241,7 @@ void indy_local0_irqdispatch(struct pt_regs *regs)
return;
}
-void indy_local1_irqdispatch(struct pt_regs *regs)
+static void indy_local1_irqdispatch(struct pt_regs *regs)
{
u8 mask = sgint->istat1 & sgint->imask1;
u8 mask2;
@@ -262,7 +261,7 @@ void indy_local1_irqdispatch(struct pt_regs *regs)
extern void ip22_be_interrupt(int irq, struct pt_regs *regs);
-void indy_buserror_irq(struct pt_regs *regs)
+static void indy_buserror_irq(struct pt_regs *regs)
{
int irq = SGI_BUSERR_IRQ;
@@ -307,6 +306,56 @@ static struct irqaction map1_cascade = {
#define SGI_INTERRUPTS SGINT_LOCAL3
#endif
+extern void indy_r4k_timer_interrupt(struct pt_regs *regs);
+extern void indy_8254timer_irq(struct pt_regs *regs);
+
+/*
+ * IRQs on the INDY look basically (barring software IRQs which we don't use
+ * at all) like:
+ *
+ * MIPS IRQ Source
+ * -------- ------
+ * 0 Software (ignored)
+ * 1 Software (ignored)
+ * 2 Local IRQ level zero
+ * 3 Local IRQ level one
+ * 4 8254 Timer zero
+ * 5 8254 Timer one
+ * 6 Bus Error
+ * 7 R4k timer (what we use)
+ *
+ * We handle the IRQ according to _our_ priority which is:
+ *
+ * Highest ---- R4k Timer
+ * Local IRQ zero
+ * Local IRQ one
+ * Bus Error
+ * 8254 Timer zero
+ * Lowest ---- 8254 Timer one
+ *
+ * then we just return, if multiple IRQs are pending then we will just take
+ * another exception, big deal.
+ */
+
+asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
+{
+ unsigned int pending = read_c0_cause();
+
+ /*
+ * First we check for r4k counter/timer IRQ.
+ */
+ if (pending & CAUSEF_IP7)
+ indy_r4k_timer_interrupt(regs);
+ else if (pending & CAUSEF_IP2)
+ indy_local0_irqdispatch(regs);
+ else if (pending & CAUSEF_IP3)
+ indy_local1_irqdispatch(regs);
+ else if (pending & CAUSEF_IP6)
+ indy_buserror_irq(regs);
+ else if (pending & (CAUSEF_IP4 | CAUSEF_IP5))
+ indy_8254timer_irq(regs);
+}
+
extern void mips_cpu_irq_init(unsigned int irq_base);
void __init arch_init_irq(void)
@@ -369,8 +418,6 @@ void __init arch_init_irq(void)
sgint->cmeimask0 = 0;
sgint->cmeimask1 = 0;
- set_except_vector(0, indyIRQ);
-
/* init CPU irqs */
mips_cpu_irq_init(SGINT_CPU);
diff --git a/arch/mips/sgi-ip22/ip22-irq.S b/arch/mips/sgi-ip22/ip22-irq.S
deleted file mode 100644
index 6ccbd9e1d96..00000000000
--- a/arch/mips/sgi-ip22/ip22-irq.S
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * ip22-irq.S: Interrupt exception dispatch code for FullHouse and
- * Guiness.
- *
- * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
- */
-
-#include <asm/asm.h>
-#include <asm/mipsregs.h>
-#include <asm/regdef.h>
-#include <asm/stackframe.h>
-
-/* A lot of complication here is taken away because:
- *
- * 1) We handle one interrupt and return, sitting in a loop and moving across
- * all the pending IRQ bits in the cause register is _NOT_ the answer, the
- * common case is one pending IRQ so optimize in that direction.
- *
- * 2) We need not check against bits in the status register IRQ mask, that
- * would make this routine slow as hell.
- *
- * 3) Linux only thinks in terms of all IRQs on or all IRQs off, nothing in
- * between like BSD spl() brain-damage.
- *
- * Furthermore, the IRQs on the INDY look basically (barring software IRQs
- * which we don't use at all) like:
- *
- * MIPS IRQ Source
- * -------- ------
- * 0 Software (ignored)
- * 1 Software (ignored)
- * 2 Local IRQ level zero
- * 3 Local IRQ level one
- * 4 8254 Timer zero
- * 5 8254 Timer one
- * 6 Bus Error
- * 7 R4k timer (what we use)
- *
- * We handle the IRQ according to _our_ priority which is:
- *
- * Highest ---- R4k Timer
- * Local IRQ zero
- * Local IRQ one
- * Bus Error
- * 8254 Timer zero
- * Lowest ---- 8254 Timer one
- *
- * then we just return, if multiple IRQs are pending then we will just take
- * another exception, big deal.
- */
-
- .text
- .set noreorder
- .set noat
- .align 5
- NESTED(indyIRQ, PT_SIZE, sp)
- SAVE_ALL
- CLI
- .set at
- mfc0 s0, CP0_CAUSE # get irq mask
-
- /* First we check for r4k counter/timer IRQ. */
- andi a0, s0, CAUSEF_IP7
- beq a0, zero, 1f
- andi a0, s0, CAUSEF_IP2 # delay slot, check local level zero
-
- /* Wheee, a timer interrupt. */
- jal indy_r4k_timer_interrupt
- move a0, sp # delay slot
- j ret_from_irq
- nop # delay slot
-
-1:
- beq a0, zero, 1f
- andi a0, s0, CAUSEF_IP3 # delay slot, check local level one
-
- /* Wheee, local level zero interrupt. */
- jal indy_local0_irqdispatch
- move a0, sp # delay slot
-
- j ret_from_irq
- nop # delay slot
-
-1:
- beq a0, zero, 1f
- andi a0, s0, CAUSEF_IP6 # delay slot, check bus error
-
- /* Wheee, local level one interrupt. */
- jal indy_local1_irqdispatch
- move a0, sp # delay slot
- j ret_from_irq
- nop # delay slot
-
-1:
- beq a0, zero, 1f
- andi a0, s0, (CAUSEF_IP4 | CAUSEF_IP5) # delay slot
-
- /* Wheee, an asynchronous bus error... */
- jal indy_buserror_irq
- move a0, sp # delay slot
- j ret_from_irq
- nop # delay slot
-
-1:
- /* Here by mistake? It is possible, that by the time we take
- * the exception the IRQ pin goes low, so just leave if this
- * is the case.
- */
- beq a0, zero, 1f
- nop # delay slot
-
- /* Must be one of the 8254 timers... */
- jal indy_8254timer_irq
- move a0, sp # delay slot
-1:
- j ret_from_irq
- nop # delay slot
- END(indyIRQ)