Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 457 insertions, 0 deletions

diff --git a/arch/mips/sgi-ip27/ip27-irq.c b/arch/mips/sgi-ip27/ip27-irq.c
new file mode 100644
index 00000000000..61817a18aed
--- /dev/null
+++ b/arch/mips/sgi-ip27/ip27-irq.c
@@ -0,0 +1,457 @@
+/*
+ * ip27-irq.c: Highlevel interrupt handling for IP27 architecture.
+ *
+ * Copyright (C) 1999, 2000 Ralf Baechle (ralf@gnu.org)
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ * Copyright (C) 1999 - 2001 Kanoj Sarcar
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/irq.h>
+#include <linux/timex.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/smp_lock.h>
+#include <linux/kernel_stat.h>
+#include <linux/delay.h>
+#include <linux/bitops.h>
+
+#include <asm/bootinfo.h>
+#include <asm/io.h>
+#include <asm/mipsregs.h>
+#include <asm/system.h>
+
+#include <asm/ptrace.h>
+#include <asm/processor.h>
+#include <asm/pci/bridge.h>
+#include <asm/sn/addrs.h>
+#include <asm/sn/agent.h>
+#include <asm/sn/arch.h>
+#include <asm/sn/hub.h>
+#include <asm/sn/intr.h>
+
+#undef DEBUG_IRQ
+#ifdef DEBUG_IRQ
+#define DBG(x...) printk(x)
+#else
+#define DBG(x...)
+#endif
+
+/*
+ * Linux has a controller-independent x86 interrupt architecture.
+ * every controller has a 'controller-template', that is used
+ * by the main code to do the right thing. Each driver-visible
+ * interrupt source is transparently wired to the apropriate
+ * controller. Thus drivers need not be aware of the
+ * interrupt-controller.
+ *
+ * Various interrupt controllers we handle: 8259 PIC, SMP IO-APIC,
+ * PIIX4's internal 8259 PIC and SGI's Visual Workstation Cobalt (IO-)APIC.
+ * (IO-APICs assumed to be messaging to Pentium local-APICs)
+ *
+ * the code is designed to be easily extended with new/different
+ * interrupt controllers, without having to do assembly magic.
+ */
+
+extern asmlinkage void ip27_irq(void);
+
+extern struct bridge_controller *irq_to_bridge[];
+extern int irq_to_slot[];
+
+/*
+ * use these macros to get the encoded nasid and widget id
+ * from the irq value
+ */
+#define IRQ_TO_BRIDGE(i)		irq_to_bridge[(i)]
+#define	SLOT_FROM_PCI_IRQ(i)		irq_to_slot[i]
+
+static inline int alloc_level(int cpu, int irq)
+{
+	struct slice_data *si = cpu_data[cpu].data;
+	int level;				/* pre-allocated entries */
+
+	level = find_first_zero_bit(si->irq_alloc_mask, LEVELS_PER_SLICE);
+	if (level >= LEVELS_PER_SLICE)
+		panic("Cpu %d flooded with devices\n", cpu);
+
+	__set_bit(level, si->irq_alloc_mask);
+	si->level_to_irq[level] = irq;
+
+	return level;
+}
+
+static inline int find_level(cpuid_t *cpunum, int irq)
+{
+	int cpu, i;
+
+	for (cpu = 0; cpu <= NR_CPUS; cpu++) {
+		struct slice_data *si = cpu_data[cpu].data;
+
+		if (!cpu_online(cpu))
+			continue;
+
+		for (i = BASE_PCI_IRQ; i < LEVELS_PER_SLICE; i++)
+			if (si->level_to_irq[i] == irq) {
+				*cpunum = cpu;
+
+				return i;
+			}
+	}
+
+	panic("Could not identify cpu/level for irq %d\n", irq);
+}
+
+/*
+ * Find first bit set
+ */
+static int ms1bit(unsigned long x)
+{
+	int b = 0, s;
+
+	s = 16; if (x >> 16 == 0) s = 0; b += s; x >>= s;
+	s =  8; if (x >>  8 == 0) s = 0; b += s; x >>= s;
+	s =  4; if (x >>  4 == 0) s = 0; b += s; x >>= s;
+	s =  2; if (x >>  2 == 0) s = 0; b += s; x >>= s;
+	s =  1; if (x >>  1 == 0) s = 0; b += s;
+
+	return b;
+}
+
+/*
+ * This code is unnecessarily complex, because we do SA_INTERRUPT
+ * intr enabling. Basically, once we grab the set of intrs we need
+ * to service, we must mask _all_ these interrupts; firstly, to make
+ * sure the same intr does not intr again, causing recursion that
+ * can lead to stack overflow. Secondly, we can not just mask the
+ * one intr we are do_IRQing, because the non-masked intrs in the
+ * first set might intr again, causing multiple servicings of the
+ * same intr. This effect is mostly seen for intercpu intrs.
+ * Kanoj 05.13.00
+ */
+
+void ip27_do_irq_mask0(struct pt_regs *regs)
+{
+	int irq, swlevel;
+	hubreg_t pend0, mask0;
+	cpuid_t cpu = smp_processor_id();
+	int pi_int_mask0 =
+		(cputoslice(cpu) == 0) ?  PI_INT_MASK0_A : PI_INT_MASK0_B;
+
+	/* copied from Irix intpend0() */
+	pend0 = LOCAL_HUB_L(PI_INT_PEND0);
+	mask0 = LOCAL_HUB_L(pi_int_mask0);
+
+	pend0 &= mask0;		/* Pick intrs we should look at */
+	if (!pend0)
+		return;
+
+	swlevel = ms1bit(pend0);
+#ifdef CONFIG_SMP
+	if (pend0 & (1UL << CPU_RESCHED_A_IRQ)) {
+		LOCAL_HUB_CLR_INTR(CPU_RESCHED_A_IRQ);
+	} else if (pend0 & (1UL << CPU_RESCHED_B_IRQ)) {
+		LOCAL_HUB_CLR_INTR(CPU_RESCHED_B_IRQ);
+	} else if (pend0 & (1UL << CPU_CALL_A_IRQ)) {
+		LOCAL_HUB_CLR_INTR(CPU_CALL_A_IRQ);
+		smp_call_function_interrupt();
+	} else if (pend0 & (1UL << CPU_CALL_B_IRQ)) {
+		LOCAL_HUB_CLR_INTR(CPU_CALL_B_IRQ);
+		smp_call_function_interrupt();
+	} else
+#endif
+	{
+		/* "map" swlevel to irq */
+		struct slice_data *si = cpu_data[cpu].data;
+
+		irq = si->level_to_irq[swlevel];
+		do_IRQ(irq, regs);
+	}
+
+	LOCAL_HUB_L(PI_INT_PEND0);
+}
+
+void ip27_do_irq_mask1(struct pt_regs *regs)
+{
+	int irq, swlevel;
+	hubreg_t pend1, mask1;
+	cpuid_t cpu = smp_processor_id();
+	int pi_int_mask1 = (cputoslice(cpu) == 0) ?  PI_INT_MASK1_A : PI_INT_MASK1_B;
+	struct slice_data *si = cpu_data[cpu].data;
+
+	/* copied from Irix intpend0() */
+	pend1 = LOCAL_HUB_L(PI_INT_PEND1);
+	mask1 = LOCAL_HUB_L(pi_int_mask1);
+
+	pend1 &= mask1;		/* Pick intrs we should look at */
+	if (!pend1)
+		return;
+
+	swlevel = ms1bit(pend1);
+	/* "map" swlevel to irq */
+	irq = si->level_to_irq[swlevel];
+	LOCAL_HUB_CLR_INTR(swlevel);
+	do_IRQ(irq, regs);
+
+	LOCAL_HUB_L(PI_INT_PEND1);
+}
+
+void ip27_prof_timer(struct pt_regs *regs)
+{
+	panic("CPU %d got a profiling interrupt", smp_processor_id());
+}
+
+void ip27_hub_error(struct pt_regs *regs)
+{
+	panic("CPU %d got a hub error interrupt", smp_processor_id());
+}
+
+static int intr_connect_level(int cpu, int bit)
+{
+	nasid_t nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(cpu));
+	struct slice_data *si = cpu_data[cpu].data;
+
+	__set_bit(bit, si->irq_enable_mask);
+
+	if (!cputoslice(cpu)) {
+		REMOTE_HUB_S(nasid, PI_INT_MASK0_A, si->irq_enable_mask[0]);
+		REMOTE_HUB_S(nasid, PI_INT_MASK1_A, si->irq_enable_mask[1]);
+	} else {
+		REMOTE_HUB_S(nasid, PI_INT_MASK0_B, si->irq_enable_mask[0]);
+		REMOTE_HUB_S(nasid, PI_INT_MASK1_B, si->irq_enable_mask[1]);
+	}
+
+	return 0;
+}
+
+static int intr_disconnect_level(int cpu, int bit)
+{
+	nasid_t nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(cpu));
+	struct slice_data *si = cpu_data[cpu].data;
+
+	__clear_bit(bit, si->irq_enable_mask);
+
+	if (!cputoslice(cpu)) {
+		REMOTE_HUB_S(nasid, PI_INT_MASK0_A, si->irq_enable_mask[0]);
+		REMOTE_HUB_S(nasid, PI_INT_MASK1_A, si->irq_enable_mask[1]);
+	} else {
+		REMOTE_HUB_S(nasid, PI_INT_MASK0_B, si->irq_enable_mask[0]);
+		REMOTE_HUB_S(nasid, PI_INT_MASK1_B, si->irq_enable_mask[1]);
+	}
+
+	return 0;
+}
+
+/* Startup one of the (PCI ...) IRQs routes over a bridge.  */
+static unsigned int startup_bridge_irq(unsigned int irq)
+{
+	struct bridge_controller *bc;
+	bridgereg_t device;
+	bridge_t *bridge;
+	int pin, swlevel;
+	cpuid_t cpu;
+
+	pin = SLOT_FROM_PCI_IRQ(irq);
+	bc = IRQ_TO_BRIDGE(irq);
+	bridge = bc->base;
+
+	DBG("bridge_startup(): irq= 0x%x  pin=%d\n", irq, pin);
+	/*
+	 * "map" irq to a swlevel greater than 6 since the first 6 bits
+	 * of INT_PEND0 are taken
+	 */
+	swlevel = find_level(&cpu, irq);
+	bridge->b_int_addr[pin].addr = (0x20000 | swlevel | (bc->nasid << 8));
+	bridge->b_int_enable |= (1 << pin);
+	bridge->b_int_enable |= 0x7ffffe00;	/* more stuff in int_enable */
+
+	/*
+	 * Enable sending of an interrupt clear packt to the hub on a high to
+	 * low transition of the interrupt pin.
+	 *
+	 * IRIX sets additional bits in the address which are documented as
+	 * reserved in the bridge docs.
+	 */
+	bridge->b_int_mode |= (1UL << pin);
+
+	/*
+	 * We assume the bridge to have a 1:1 mapping between devices
+	 * (slots) and intr pins.
+	 */
+	device = bridge->b_int_device;
+	device &= ~(7 << (pin*3));
+	device |= (pin << (pin*3));
+	bridge->b_int_device = device;
+
+        bridge->b_wid_tflush;
+
+        return 0;       /* Never anything pending.  */
+}
+
+/* Shutdown one of the (PCI ...) IRQs routes over a bridge.  */
+static void shutdown_bridge_irq(unsigned int irq)
+{
+	struct bridge_controller *bc = IRQ_TO_BRIDGE(irq);
+	bridge_t *bridge = bc->base;
+	struct slice_data *si = cpu_data[bc->irq_cpu].data;
+	int pin, swlevel;
+	cpuid_t cpu;
+
+	DBG("bridge_shutdown: irq 0x%x\n", irq);
+	pin = SLOT_FROM_PCI_IRQ(irq);
+
+	/*
+	 * map irq to a swlevel greater than 6 since the first 6 bits
+	 * of INT_PEND0 are taken
+	 */
+	swlevel = find_level(&cpu, irq);
+	intr_disconnect_level(cpu, swlevel);
+
+	__clear_bit(swlevel, si->irq_alloc_mask);
+	si->level_to_irq[swlevel] = -1;
+
+	bridge->b_int_enable &= ~(1 << pin);
+	bridge->b_wid_tflush;
+}
+
+static inline void enable_bridge_irq(unsigned int irq)
+{
+	cpuid_t cpu;
+	int swlevel;
+
+	swlevel = find_level(&cpu, irq);	/* Criminal offence */
+	intr_connect_level(cpu, swlevel);
+}
+
+static inline void disable_bridge_irq(unsigned int irq)
+{
+	cpuid_t cpu;
+	int swlevel;
+
+	swlevel = find_level(&cpu, irq);	/* Criminal offence */
+	intr_disconnect_level(cpu, swlevel);
+}
+
+static void mask_and_ack_bridge_irq(unsigned int irq)
+{
+	disable_bridge_irq(irq);
+}
+
+static void end_bridge_irq(unsigned int irq)
+{
+	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)) &&
+	    irq_desc[irq].action)
+		enable_bridge_irq(irq);
+}
+
+static struct hw_interrupt_type bridge_irq_type = {
+	.typename	= "bridge",
+	.startup	= startup_bridge_irq,
+	.shutdown	= shutdown_bridge_irq,
+	.enable		= enable_bridge_irq,
+	.disable	= disable_bridge_irq,
+	.ack		= mask_and_ack_bridge_irq,
+	.end		= end_bridge_irq,
+};
+
+static unsigned long irq_map[NR_IRQS / BITS_PER_LONG];
+
+static int allocate_irqno(void)
+{
+	int irq;
+
+again:
+	irq = find_first_zero_bit(irq_map, NR_IRQS);
+
+	if (irq >= NR_IRQS)
+		return -ENOSPC;
+
+	if (test_and_set_bit(irq, irq_map))
+		goto again;
+
+	return irq;
+}
+
+void free_irqno(unsigned int irq)
+{
+	clear_bit(irq, irq_map);
+}
+
+void __devinit register_bridge_irq(unsigned int irq)
+{
+	irq_desc[irq].status	= IRQ_DISABLED;
+	irq_desc[irq].action	= 0;
+	irq_desc[irq].depth	= 1;
+	irq_desc[irq].handler	= &bridge_irq_type;
+}
+
+int __devinit request_bridge_irq(struct bridge_controller *bc)
+{
+	int irq = allocate_irqno();
+	int swlevel, cpu;
+	nasid_t nasid;
+
+	if (irq < 0)
+		return irq;
+
+	/*
+	 * "map" irq to a swlevel greater than 6 since the first 6 bits
+	 * of INT_PEND0 are taken
+	 */
+	cpu = bc->irq_cpu;
+	swlevel = alloc_level(cpu, irq);
+	if (unlikely(swlevel < 0)) {
+		free_irqno(irq);
+
+		return -EAGAIN;
+	}
+
+	/* Make sure it's not already pending when we connect it. */
+	nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(cpu));
+	REMOTE_HUB_CLR_INTR(nasid, swlevel);
+
+	intr_connect_level(cpu, swlevel);
+
+	register_bridge_irq(irq);
+
+	return irq;
+}
+
+void __init arch_init_irq(void)
+{
+	set_except_vector(0, ip27_irq);
+}
+
+void install_ipi(void)
+{
+	int slice = LOCAL_HUB_L(PI_CPU_NUM);
+	int cpu = smp_processor_id();
+	struct slice_data *si = cpu_data[cpu].data;
+	hubreg_t mask, set;
+
+	if (slice == 0) {
+		LOCAL_HUB_CLR_INTR(CPU_RESCHED_A_IRQ);
+		LOCAL_HUB_CLR_INTR(CPU_CALL_A_IRQ);
+		mask = LOCAL_HUB_L(PI_INT_MASK0_A);	/* Slice A */
+		set = (1UL << CPU_RESCHED_A_IRQ) | (1UL << CPU_CALL_A_IRQ);
+		mask |= set;
+		si->irq_enable_mask[0] |= set;
+		si->irq_alloc_mask[0] |= set;
+		LOCAL_HUB_S(PI_INT_MASK0_A, mask);
+	} else {
+		LOCAL_HUB_CLR_INTR(CPU_RESCHED_B_IRQ);
+		LOCAL_HUB_CLR_INTR(CPU_CALL_B_IRQ);
+		mask = LOCAL_HUB_L(PI_INT_MASK0_B);	/* Slice B */
+		set = (1UL << CPU_RESCHED_B_IRQ) | (1UL << CPU_CALL_B_IRQ);
+		mask |= set;
+		si->irq_enable_mask[1] |= set;
+		si->irq_alloc_mask[1] |= set;
+		LOCAL_HUB_S(PI_INT_MASK0_B, mask);
+	}
+}