Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:

 o Add basic support for the Mediatek/Ralink Wireless SoC family.

 o The Qualcomm Atheros platform is extended by support for the new
   QCA955X SoC series as well as a bunch of patches that get the code
   ready for OF support.

 o Lantiq and BCM47XX platform have a few improvements and bug fixes.

 o MIPS has sent a few patches that get the kernel ready for the
   upcoming microMIPS support.

 o The rest of the series is made up of small bug fixes and cleanups
   that relate to various parts of the MIPS code.  The biggy in there is
   a whitespace cleanup.  After I was sent another set of whitespace
   cleanup patches I decided it was the time to clean the whitespace
   "issues" for once and and that touches many files below arch/mips/.

Fix up silly conflicts, mostly due to whitespace cleanups.

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (105 commits)
  MIPS: Quit exporting kernel internel break codes to uapi/asm/break.h
  MIPS: remove broken conditional inside vpe loader code
  MIPS: SMTC: fix implicit declaration of set_vi_handler
  MIPS: early_printk: drop __init annotations
  MIPS: Probe for and report hardware virtualization support.
  MIPS: ath79: add support for the Qualcomm Atheros AP136-010 board
  MIPS: ath79: add USB controller registration code for the QCA955X SoCs
  MIPS: ath79: add PCI controller registration code for the QCA955X SoCs
  MIPS: ath79: add WMAC registration code for the QCA955X SoCs
  MIPS: ath79: register UART for the QCA955X SoCs
  MIPS: ath79: add QCA955X specific glue to ath79_device_reset_{set, clear}
  MIPS: ath79: add GPIO setup code for the QCA955X SoCs
  MIPS: ath79: add IRQ handling code for the QCA955X SoCs
  MIPS: ath79: add clock setup code for the QCA955X SoCs
  MIPS: ath79: add SoC detection code for the QCA955X SoCs
  MIPS: ath79: add early printk support for the QCA955X SoCs
  MIPS: ath79: fix WMAC IRQ resource assignment
  mips: reserve elfcorehdr
  mips: Make sure kernel memory is in iomem
  MIPS: ath79: use dynamically allocated USB platform devices
  ...

9 files changed, 64 insertions, 64 deletions

diff --git a/arch/mips/sibyte/Platform b/arch/mips/sibyte/Platform
index 911dfe39c63..d03a07516f8 100644
--- a/arch/mips/sibyte/Platform
+++ b/arch/mips/sibyte/Platform
@@ -9,7 +9,7 @@ platform-$(CONFIG_SIBYTE_BCM1x80)	+= sibyte/
 #
 # Sibyte SB1250 / BCM1480 family of SOCs
 #
-cflags-$(CONFIG_SIBYTE_BCM112X)	+=					\
+cflags-$(CONFIG_SIBYTE_BCM112X) +=					\
 		-I$(srctree)/arch/mips/include/asm/mach-sibyte		\
 		-DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1250_112x_ALL
 
@@ -18,11 +18,11 @@ cflags-$(CONFIG_SIBYTE_SB1250)	+=					\
 		-I$(srctree)/arch/mips/include/asm/mach-sibyte		\
 		-DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1250_112x_ALL
 
-cflags-$(CONFIG_SIBYTE_BCM1x55)	+=					\
+cflags-$(CONFIG_SIBYTE_BCM1x55) +=					\
 		-I$(srctree)/arch/mips/include/asm/mach-sibyte		\
 		-DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1480_ALL
 
-cflags-$(CONFIG_SIBYTE_BCM1x80)	+=					\
+cflags-$(CONFIG_SIBYTE_BCM1x80) +=					\
 		-I$(srctree)/arch/mips/include/asm/mach-sibyte		\
 		-DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1480_ALL
 
diff --git a/arch/mips/sibyte/bcm1480/irq.c b/arch/mips/sibyte/bcm1480/irq.c
index 215713e1f3c..09d6e16a70f 100644
--- a/arch/mips/sibyte/bcm1480/irq.c
+++ b/arch/mips/sibyte/bcm1480/irq.c
@@ -283,10 +283,10 @@ void __init arch_init_irq(void)
 	for (cpu = 0; cpu < 4; cpu++) {
 		__raw_writeq(IMR_IP3_VAL, IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) +
 						 (K_BCM1480_INT_MBOX_0_0 << 3)));
-        }
+	}
 
 
-	/* Clear the mailboxes.  The firmware may leave them dirty */
+	/* Clear the mailboxes.	 The firmware may leave them dirty */
 	for (cpu = 0; cpu < 4; cpu++) {
 		__raw_writeq(0xffffffffffffffffULL,
 			     IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_MAILBOX_0_CLR_CPU)));
@@ -307,7 +307,7 @@ void __init arch_init_irq(void)
 
 	/*
 	 * Note that the timer interrupts are also mapped, but this is
-	 * done in bcm1480_time_init().  Also, the profiling driver
+	 * done in bcm1480_time_init().	 Also, the profiling driver
 	 * does its own management of IP7.
 	 */
 
@@ -325,7 +325,7 @@ static inline void dispatch_ip2(void)
 
 	/*
 	 * Default...we've hit an IP[2] interrupt, which means we've got to
-	 * check the 1480 interrupt registers to figure out what to do.  Need
+	 * check the 1480 interrupt registers to figure out what to do.	 Need
 	 * to detect which CPU we're on, now that smp_affinity is supported.
 	 */
 	base = A_BCM1480_IMR_MAPPER(cpu);
diff --git a/arch/mips/sibyte/common/cfe.c b/arch/mips/sibyte/common/cfe.c
index 6343011e990..588e1806a1a 100644
--- a/arch/mips/sibyte/common/cfe.c
+++ b/arch/mips/sibyte/common/cfe.c
@@ -127,8 +127,8 @@ static __init void prom_meminit(void)
 				if ((initrd_pstart > addr) &&
 				    (initrd_pstart < (addr + size))) {
 					add_memory_region(addr,
-					                  initrd_pstart - addr,
-					                  BOOT_MEM_RAM);
+							  initrd_pstart - addr,
+							  BOOT_MEM_RAM);
 					rd_flag = 1;
 				}
 				if ((initrd_pend > addr) &&
@@ -195,7 +195,7 @@ static int __init initrd_setup(char *str)
 
 	/*
 	 *Initrd location comes in the form "<hex size of ramdisk in bytes>@<location in memory>"
-	 *  e.g. initrd=3abfd@80010000.  This is set up by the loader.
+	 *  e.g. initrd=3abfd@80010000.	 This is set up by the loader.
 	 */
 	for (tmp = str; *tmp != '@'; tmp++) {
 		if (!*tmp) {
@@ -244,7 +244,7 @@ void __init prom_init(void)
 	int *prom_vec = (int *) fw_arg3;
 
 	_machine_restart   = cfe_linux_restart;
-	_machine_halt      = cfe_linux_halt;
+	_machine_halt	   = cfe_linux_halt;
 	pm_power_off = cfe_linux_halt;
 
 	/*
@@ -299,7 +299,7 @@ void __init prom_init(void)
 #ifdef CONFIG_BLK_DEV_INITRD
 	{
 		char *ptr;
-		/* Need to find out early whether we've got an initrd.  So scan
+		/* Need to find out early whether we've got an initrd.	So scan
 		   the list looking now */
 		for (ptr = arcs_cmdline; *ptr; ptr++) {
 			while (*ptr == ' ') {
diff --git a/arch/mips/sibyte/common/sb_tbprof.c b/arch/mips/sibyte/common/sb_tbprof.c
index e8c4538c5f6..2188b39a125 100644
--- a/arch/mips/sibyte/common/sb_tbprof.c
+++ b/arch/mips/sibyte/common/sb_tbprof.c
@@ -152,7 +152,7 @@ static u64 tb_period;
 
 static void arm_tb(void)
 {
-        u64 scdperfcnt;
+	u64 scdperfcnt;
 	u64 next = (1ULL << 40) - tb_period;
 	u64 tb_options = M_SCD_TRACE_CFG_FREEZE_FULL;
 
@@ -257,8 +257,8 @@ static irqreturn_t sbprof_pc_intr(int irq, void *dev_id)
 
 /*
  * Requires: Already called zclk_timer_init with a value that won't
- *           saturate 40 bits.  No subsequent use of SCD performance counters
- *           or trace buffer.
+ *	     saturate 40 bits.	No subsequent use of SCD performance counters
+ *	     or trace buffer.
  */
 
 static int sbprof_zbprof_start(struct file *filp)
@@ -288,8 +288,8 @@ static int sbprof_zbprof_start(struct file *filp)
 
 	/*
 	 * We grab this interrupt to prevent others from trying to use
-         * it, even though we don't want to service the interrupts
-         * (they only feed into the trace-on-interrupt mechanism)
+	 * it, even though we don't want to service the interrupts
+	 * (they only feed into the trace-on-interrupt mechanism)
 	 */
 	if (request_irq(K_INT_PERF_CNT, sbprof_pc_intr, 0, DEVNAME " scd perfcnt", &sbp)) {
 		free_irq(K_INT_TRACE_FREEZE, &sbp);
@@ -298,7 +298,7 @@ static int sbprof_zbprof_start(struct file *filp)
 
 	/*
 	 * I need the core to mask these, but the interrupt mapper to
-	 *  pass them through.  I am exploiting my knowledge that
+	 *  pass them through.	I am exploiting my knowledge that
 	 *  cp0_status masks out IP[5]. krw
 	 */
 #if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
@@ -328,7 +328,7 @@ static int sbprof_zbprof_start(struct file *filp)
 	__raw_writeq(0, IOADDR(A_ADDR_TRAP_CFG_3));
 
 	/* Initialize Trace Event 0-7 */
-	/*				when interrupt  */
+	/*				when interrupt	*/
 	__raw_writeq(M_SCD_TREVT_INTERRUPT, IOADDR(A_SCD_TRACE_EVENT_0));
 	__raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_1));
 	__raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_2));
@@ -479,7 +479,7 @@ static ssize_t sbprof_tb_read(struct file *filp, char *buf,
 			return err;
 		}
 		pr_debug(DEVNAME ": read from sample %d, %d bytes\n",
-		         cur_sample, cur_count);
+			 cur_sample, cur_count);
 		size -= cur_count;
 		sample_left -= cur_count;
 		if (!sample_left) {
@@ -540,7 +540,7 @@ static const struct file_operations sbprof_tb_fops = {
 	.open		= sbprof_tb_open,
 	.release	= sbprof_tb_release,
 	.read		= sbprof_tb_read,
-	.unlocked_ioctl	= sbprof_tb_ioctl,
+	.unlocked_ioctl = sbprof_tb_ioctl,
 	.compat_ioctl	= sbprof_tb_ioctl,
 	.mmap		= NULL,
 	.llseek		= default_llseek,
diff --git a/arch/mips/sibyte/sb1250/bus_watcher.c b/arch/mips/sibyte/sb1250/bus_watcher.c
index 86e6e54dd15..e651105b3f0 100644
--- a/arch/mips/sibyte/sb1250/bus_watcher.c
+++ b/arch/mips/sibyte/sb1250/bus_watcher.c
@@ -71,7 +71,7 @@ static void print_summary(uint32_t status, uint32_t l2_err,
  * already been destructively read out of the registers.
  *
  * notes: this is currently used by the cache error handler
- *        should provide locking against the interrupt handler
+ *	  should provide locking against the interrupt handler
  */
 void check_bus_watcher(void)
 {
@@ -119,7 +119,7 @@ static int bw_print_buffer(char *page, struct bw_stats_struct *stats)
 		       (int)G_SCD_BERR_RID(stats->status),
 		       (int)G_SCD_BERR_DCODE(stats->status));
 	/* XXXKW indicate multiple errors between printings, or stats
-           collection (or both)? */
+	   collection (or both)? */
 	if (stats->status & M_SCD_BERR_MULTERRS)
 		len += sprintf(page+len, "Multiple errors observed since last check.\n");
 	if (stats->status_printed) {
@@ -168,7 +168,7 @@ static void create_proc_decoder(struct bw_stats_struct *stats)
  * sibyte_bw_int - handle bus watcher interrupts and accumulate counts
  *
  * notes: possible re-entry due to multiple sources
- *        should check/indicate saturation
+ *	  should check/indicate saturation
  */
 static irqreturn_t sibyte_bw_int(int irq, void *data)
 {
diff --git a/arch/mips/sibyte/sb1250/irq.c b/arch/mips/sibyte/sb1250/irq.c
index 340aaf62665..fca0cdb9950 100644
--- a/arch/mips/sibyte/sb1250/irq.c
+++ b/arch/mips/sibyte/sb1250/irq.c
@@ -264,7 +264,7 @@ void __init arch_init_irq(void)
 		     IOADDR(A_IMR_REGISTER(1, R_IMR_INTERRUPT_MAP_BASE) +
 			    (K_INT_MBOX_0 << 3)));
 
-	/* Clear the mailboxes.  The firmware may leave them dirty */
+	/* Clear the mailboxes.	 The firmware may leave them dirty */
 	__raw_writeq(0xffffffffffffffffULL,
 		     IOADDR(A_IMR_REGISTER(0, R_IMR_MAILBOX_CLR_CPU)));
 	__raw_writeq(0xffffffffffffffffULL,
@@ -277,7 +277,7 @@ void __init arch_init_irq(void)
 
 	/*
 	 * Note that the timer interrupts are also mapped, but this is
-	 * done in sb1250_time_init().  Also, the profiling driver
+	 * done in sb1250_time_init().	Also, the profiling driver
 	 * does its own management of IP7.
 	 */
 
@@ -294,7 +294,7 @@ static inline void dispatch_ip2(void)
 
 	/*
 	 * Default...we've hit an IP[2] interrupt, which means we've got to
-	 * check the 1250 interrupt registers to figure out what to do.  Need
+	 * check the 1250 interrupt registers to figure out what to do.	 Need
 	 * to detect which CPU we're on, now that smp_affinity is supported.
 	 */
 	mask = __raw_readq(IOADDR(A_IMR_REGISTER(cpu,
@@ -323,7 +323,7 @@ asmlinkage void plat_irq_dispatch(void)
 	if (pending & CAUSEF_IP7) /* CPU performance counter interrupt */
 		do_IRQ(MIPS_CPU_IRQ_BASE + 7);
 	else if (pending & CAUSEF_IP4)
-		do_IRQ(K_INT_TIMER_0 + cpu); 	/* sb1250_timer_interrupt() */
+		do_IRQ(K_INT_TIMER_0 + cpu);	/* sb1250_timer_interrupt() */
 
 #ifdef CONFIG_SMP
 	else if (pending & CAUSEF_IP3)
diff --git a/arch/mips/sibyte/sb1250/setup.c b/arch/mips/sibyte/sb1250/setup.c
index 92da3155ce0..a14bd4cb0bc 100644
--- a/arch/mips/sibyte/sb1250/setup.c
+++ b/arch/mips/sibyte/sb1250/setup.c
@@ -203,8 +203,8 @@ void __init sb1250_setup(void)
 	case K_SYS_REVISION_BCM1250_PASS1:
 #ifndef CONFIG_SB1_PASS_1_WORKAROUNDS
 		printk("@@@@ This is a BCM1250 A0-A2 (Pass 1) board, "
-		            "and the kernel doesn't have the proper "
-		            "workarounds compiled in. @@@@\n");
+			    "and the kernel doesn't have the proper "
+			    "workarounds compiled in. @@@@\n");
 		bad_config = 1;
 #endif
 		break;
@@ -213,28 +213,28 @@ void __init sb1250_setup(void)
 #if !defined(CONFIG_SB1_PASS_2_WORKAROUNDS) || \
     !defined(CONFIG_SB1_PASS_2_1_WORKAROUNDS)
 		printk("@@@@ This is a BCM1250 A3-A10 board, and the "
-		            "kernel doesn't have the proper workarounds "
-		            "compiled in. @@@@\n");
+			    "kernel doesn't have the proper workarounds "
+			    "compiled in. @@@@\n");
 		bad_config = 1;
 #endif
 #ifdef CONFIG_CPU_HAS_PREFETCH
 		printk("@@@@ Prefetches may be enabled in this kernel, "
-		            "but are buggy on this board.  @@@@\n");
+			    "but are buggy on this board.  @@@@\n");
 		bad_config = 1;
 #endif
 		break;
 	case K_SYS_REVISION_BCM1250_PASS2_2:
 #ifndef CONFIG_SB1_PASS_2_WORKAROUNDS
 		printk("@@@@ This is a BCM1250 B1/B2. board, and the "
-		            "kernel doesn't have the proper workarounds "
-		            "compiled in. @@@@\n");
+			    "kernel doesn't have the proper workarounds "
+			    "compiled in. @@@@\n");
 		bad_config = 1;
 #endif
 #if defined(CONFIG_SB1_PASS_2_1_WORKAROUNDS) || \
     !defined(CONFIG_CPU_HAS_PREFETCH)
 		printk("@@@@ This is a BCM1250 B1/B2, but the kernel is "
-		            "conservatively configured for an 'A' stepping. "
-		            "@@@@\n");
+			    "conservatively configured for an 'A' stepping. "
+			    "@@@@\n");
 #endif
 		break;
 	default:
diff --git a/arch/mips/sibyte/swarm/platform.c b/arch/mips/sibyte/swarm/platform.c
index 097335262fb..9480c14ec66 100644
--- a/arch/mips/sibyte/swarm/platform.c
+++ b/arch/mips/sibyte/swarm/platform.c
@@ -13,7 +13,7 @@
 
 #define DRV_NAME	"pata-swarm"
 
-#define SWARM_IDE_SHIFT	5
+#define SWARM_IDE_SHIFT 5
 #define SWARM_IDE_BASE	0x1f0
 #define SWARM_IDE_CTRL	0x3f6
 
@@ -123,7 +123,7 @@ static int __init sb1250_device_init(void)
 	case K_SYS_SOC_TYPE_BCM1120:
 	case K_SYS_SOC_TYPE_BCM1125:
 	case K_SYS_SOC_TYPE_BCM1125H:
-	case K_SYS_SOC_TYPE_BCM1250_ALT2:       /* Hybrid */
+	case K_SYS_SOC_TYPE_BCM1250_ALT2:	/* Hybrid */
 		ret = platform_add_devices(sb1250_devs, 2);
 		break;
 	case K_SYS_SOC_TYPE_BCM1x55:
diff --git a/arch/mips/sibyte/swarm/rtc_xicor1241.c b/arch/mips/sibyte/swarm/rtc_xicor1241.c
index 4438b2195c4..178a824b28d 100644
--- a/arch/mips/sibyte/swarm/rtc_xicor1241.c
+++ b/arch/mips/sibyte/swarm/rtc_xicor1241.c
@@ -4,8 +4,8 @@
  * Copyright (C) 2002 MontaVista Software Inc.
  * Author: jsun@mvista.com or jsun@junsun.net
  *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */
@@ -28,15 +28,15 @@
  * Register bits
  */
 
-#define X1241REG_SR_BAT	0x80		/* currently on battery power */
+#define X1241REG_SR_BAT 0x80		/* currently on battery power */
 #define X1241REG_SR_RWEL 0x04		/* r/w latch is enabled, can write RTC */
 #define X1241REG_SR_WEL 0x02		/* r/w latch is unlocked, can enable r/w now */
 #define X1241REG_SR_RTCF 0x01		/* clock failed */
 #define X1241REG_BL_BP2 0x80		/* block protect 2 */
 #define X1241REG_BL_BP1 0x40		/* block protect 1 */
 #define X1241REG_BL_BP0 0x20		/* block protect 0 */
-#define X1241REG_BL_WD1	0x10
-#define X1241REG_BL_WD0	0x08
+#define X1241REG_BL_WD1 0x10
+#define X1241REG_BL_WD0 0x08
 #define X1241REG_HR_MIL 0x80		/* military time format */
 
 /*
@@ -61,50 +61,50 @@
 
 static int xicor_read(uint8_t addr)
 {
-        while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
-                ;
+	while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+		;
 
 	__raw_writeq((addr >> 8) & 0x7, SMB_CSR(R_SMB_CMD));
 	__raw_writeq(addr & 0xff, SMB_CSR(R_SMB_DATA));
 	__raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR2BYTE,
 		     SMB_CSR(R_SMB_START));
 
-        while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
-                ;
+	while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+		;
 
 	__raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_RD1BYTE,
 		     SMB_CSR(R_SMB_START));
 
-        while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
-                ;
+	while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+		;
 
-        if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
-                /* Clear error bit by writing a 1 */
-                __raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
-                return -1;
-        }
+	if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
+		/* Clear error bit by writing a 1 */
+		__raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
+		return -1;
+	}
 
 	return (__raw_readq(SMB_CSR(R_SMB_DATA)) & 0xff);
 }
 
 static int xicor_write(uint8_t addr, int b)
 {
-        while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
-                ;
+	while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+		;
 
 	__raw_writeq(addr, SMB_CSR(R_SMB_CMD));
 	__raw_writeq((addr & 0xff) | ((b & 0xff) << 8), SMB_CSR(R_SMB_DATA));
 	__raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR3BYTE,
 		     SMB_CSR(R_SMB_START));
 
-        while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
-                ;
+	while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+		;
 
-        if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
-                /* Clear error bit by writing a 1 */
-                __raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
-                return -1;
-        } else {
+	if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
+		/* Clear error bit by writing a 1 */
+		__raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
+		return -1;
+	} else {
 		return 0;
 	}
 }