[MIPS] Rewrite all the assembler interrupt handlers to C.

Saves like 1,600 lines of code, is way easier to debug, compilers
frequently do a better job than the cut and paste type of handlers many
boards had.  And finally having all the stuff done in a single place
also means alot of bug potencial for the MT ASE is gone.

The only surviving handler in assembler is the DECstation one; I hope
Maciej will rewrite it.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

3 files changed, 28 insertions, 117 deletions

diff --git a/arch/mips/sni/Makefile b/arch/mips/sni/Makefile
index 1e5676e4be8..9c7eaa5fb21 100644
--- a/arch/mips/sni/Makefile
+++ b/arch/mips/sni/Makefile
@@ -2,6 +2,6 @@
 # Makefile for the SNI specific part of the kernel
 #
 
-obj-y	 	+= int-handler.o irq.o pcimt_scache.o reset.o setup.o
+obj-y	 	+= irq.o pcimt_scache.o reset.o setup.o
 
 EXTRA_AFLAGS := $(CFLAGS)
diff --git a/arch/mips/sni/int-handler.S b/arch/mips/sni/int-handler.S
deleted file mode 100644
index 2cdc09f55f1..00000000000
--- a/arch/mips/sni/int-handler.S
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * SNI RM200 PCI specific interrupt handler code.
- *
- * Copyright (C) 1994, 95, 96, 97, 98, 1999, 2000, 01 by Ralf Baechle
- */
-#include <asm/asm.h>
-#include <asm/mipsregs.h>
-#include <asm/regdef.h>
-#include <asm/sni.h>
-#include <asm/stackframe.h>
-
-/*
- * The PCI ASIC has the nasty property that it may delay writes if it is busy.
- * As a consequence from writes that have not graduated when we exit from the
- * interrupt handler we might catch a spurious interrupt.  To avoid this we
- * force the PCI ASIC to graduate all writes by executing a read from the
- * PCI bus.
- */
-		.set	noreorder
-		.set	noat
-		.align	5
-		NESTED(sni_rm200_pci_handle_int, PT_SIZE, sp)
-		SAVE_ALL
-		CLI
-		.set	at
-
-		/* Blinken light ...  */
-		lb	t0, led_cache
-		addiu	t0, 1
-		sb	t0, led_cache
-		sb	t0, PCIMT_CSLED			# write only register
-		.data
-led_cache:	.byte	0
-		.text
-
-		mfc0	t0, CP0_STATUS
-		mfc0	t1, CP0_CAUSE
-		and	t0, t1
-
-		 andi	t1, t0, 0x0800			# hardware interrupt 1
-		bnez	t1, _hwint1
-		 andi	t1, t0, 0x4000			# hardware interrupt 4
-		bnez	t1, _hwint4
-		 andi	t1, t0, 0x2000			# hardware interrupt 3
-		bnez	t1, _hwint3
-		 andi	t1, t0, 0x1000			# hardware interrupt 2
-		bnez	t1, _hwint2
-		 andi	t1, t0, 0x8000			# hardware interrupt 5
-		bnez	t1, _hwint5
-		 andi	t1, t0, 0x0400			# hardware interrupt 0
-		bnez	t1, _hwint0
-		 nop
-
-		j	restore_all			# spurious interrupt
-		 nop
-
- ##############################################################################
-
-/* hwint0 should deal with MP agent, ASIC PCI, EISA NMI and debug
-   button interrupts.  */
-_hwint0:	jal	pciasic_hwint0
-		 move	a0, sp
-		j	ret_from_irq
-		 nop
-
-/*
- * hwint 1 deals with EISA and SCSI interrupts
- */
-_hwint1:	jal	pciasic_hwint1
-		 move	a0, sp
-		j	ret_from_irq
-		 nop
-
-
-/*
- * This interrupt was used for the com1 console on the first prototypes;
- * it's unsed otherwise
- */
-_hwint2:	jal	pciasic_hwint2
-		 move	a0, sp
-		j	ret_from_irq
-		 nop
-
-/*
- * hwint 3 are the PCI interrupts A - D
- */
-_hwint3:	jal	pciasic_hwint3
-		 move	a0, sp
-		j	ret_from_irq
-		 nop
-
-/*
- * hwint 4 is used for only the onboard PCnet 32.
- */
-_hwint4:	jal	pciasic_hwint4
-		 move	a0, sp
-		j	ret_from_irq
-		 nop
-
-/* hwint5 is the r4k count / compare interrupt  */
-_hwint5:	jal	pciasic_hwint5
-		 move	a0, sp
-		j	ret_from_irq
-		 nop
-
-		END(sni_rm200_pci_handle_int)
diff --git a/arch/mips/sni/irq.c b/arch/mips/sni/irq.c
index 952038aa4b9..7365b4853dd 100644
--- a/arch/mips/sni/irq.c
+++ b/arch/mips/sni/irq.c
@@ -19,8 +19,6 @@
 
 DEFINE_SPINLOCK(pciasic_lock);
 
-extern asmlinkage void sni_rm200_pci_handle_int(void);
-
 static void enable_pciasic_irq(unsigned int irq)
 {
 	unsigned int mask = 1 << (irq - PCIMT_IRQ_INT2);
@@ -71,20 +69,20 @@ static struct hw_interrupt_type pciasic_irq_type = {
  * hwint0 should deal with MP agent, ASIC PCI, EISA NMI and debug
  * button interrupts.  Later ...
  */
-void pciasic_hwint0(struct pt_regs *regs)
+static void pciasic_hwint0(struct pt_regs *regs)
 {
 	panic("Received int0 but no handler yet ...");
 }
 
 /* This interrupt was used for the com1 console on the first prototypes.  */
-void pciasic_hwint2(struct pt_regs *regs)
+static void pciasic_hwint2(struct pt_regs *regs)
 {
 	/* I think this shouldn't happen on production machines.  */
 	panic("hwint2 and no handler yet");
 }
 
 /* hwint5 is the r4k count / compare interrupt  */
-void pciasic_hwint5(struct pt_regs *regs)
+static void pciasic_hwint5(struct pt_regs *regs)
 {
 	panic("hwint5 and no handler yet");
 }
@@ -105,7 +103,7 @@ static unsigned int ls1bit8(unsigned int x)
  *
  * The EISA_INT bit in CSITPEND is high active, all others are low active.
  */
-void pciasic_hwint1(struct pt_regs *regs)
+static void pciasic_hwint1(struct pt_regs *regs)
 {
 	u8 pend = *(volatile char *)PCIMT_CSITPEND;
 	unsigned long flags;
@@ -135,7 +133,7 @@ void pciasic_hwint1(struct pt_regs *regs)
 /*
  * hwint 3 should deal with the PCI A - D interrupts,
  */
-void pciasic_hwint3(struct pt_regs *regs)
+static void pciasic_hwint3(struct pt_regs *regs)
 {
 	u8 pend = *(volatile char *)PCIMT_CSITPEND;
 	int irq;
@@ -150,13 +148,34 @@ void pciasic_hwint3(struct pt_regs *regs)
 /*
  * hwint 4 is used for only the onboard PCnet 32.
  */
-void pciasic_hwint4(struct pt_regs *regs)
+static void pciasic_hwint4(struct pt_regs *regs)
 {
 	clear_c0_status(IE_IRQ4);
 	do_IRQ(PCIMT_IRQ_ETHERNET, regs);
 	set_c0_status(IE_IRQ4);
 }
 
+asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
+{
+	unsigned int pending = read_c0_status() & read_c0_cause();
+	static unsigned char led_cache;
+
+	*(volatile unsigned char *) PCIMT_CSLED = ++led_cache;
+
+	if (pending & 0x0800)
+		pciasic_hwint1(regs);
+	else if (pending & 0x4000)
+		pciasic_hwint4(regs);
+	else if (pending & 0x2000)
+		pciasic_hwint3(regs);
+	else if (pending & 0x1000)
+		pciasic_hwint2(regs);
+	else if (pending & 0x8000)
+		pciasic_hwint5(regs);
+	else if (pending & 0x0400)
+		pciasic_hwint0(regs);
+}
+
 void __init init_pciasic(void)
 {
 	unsigned long flags;
@@ -176,8 +195,6 @@ void __init arch_init_irq(void)
 {
 	int i;
 
-	set_except_vector(0, sni_rm200_pci_handle_int);
-
 	init_i8259_irqs();			/* Integrated i8259  */
 	init_pciasic();