diff options
| author | Atsushi Nemoto <anemo@mba.ocn.ne.jp> | 2007-10-25 01:34:09 +0900 |
|---|---|---|
| committer | Ralf Baechle <ralf@linux-mips.org> | 2007-10-29 19:35:35 +0000 |
| commit | 229f773ef4ee852ad7bfbe8e1238a2c35b2baa6f (patch) | |
| tree | 44d9dd3f2be845140024883db13ab879b4ce1f2e /arch/mips/tx4938/toshiba_rbtx4938 | |
| parent | 22df3f53e33d55335e1ef43d4e6ead54b379b3a2 (diff) | |
[MIPS] txx9tmr clockevent/clocksource driver
Convert jmr3927_clock_event_device to more generic
txx9tmr_clock_event_device which supports one-shot mode. The
txx9tmr_clock_event_device can be used for TX49 too if the cp0 timer
interrupt was not available.
Convert jmr3927_hpt_read to txx9_clocksource driver which does not
depends jiffies anymore. The txx9_clocksource itself can be used for
TX49, but normally TX49 uses higher precision clocksource_mips.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Diffstat (limited to 'arch/mips/tx4938/toshiba_rbtx4938')
| -rw-r--r-- | arch/mips/tx4938/toshiba_rbtx4938/setup.c | 19 |
1 files changed, 7 insertions, 12 deletions
diff --git a/arch/mips/tx4938/toshiba_rbtx4938/setup.c b/arch/mips/tx4938/toshiba_rbtx4938/setup.c index ceecaf49895..4a8152375ef 100644 --- a/arch/mips/tx4938/toshiba_rbtx4938/setup.c +++ b/arch/mips/tx4938/toshiba_rbtx4938/setup.c @@ -26,6 +26,7 @@ #include <asm/reboot.h> #include <asm/irq.h> #include <asm/time.h> +#include <asm/txx9tmr.h> #include <asm/uaccess.h> #include <asm/io.h> #include <asm/bootinfo.h> @@ -773,15 +774,8 @@ void __init tx4938_board_setup(void) } /* TMR */ - /* disable all timers */ - for (i = 0; i < TX4938_NR_TMR; i++) { - tx4938_tmrptr(i)->tcr = 0x00000020; - tx4938_tmrptr(i)->tisr = 0; - tx4938_tmrptr(i)->cpra = 0xffffffff; - tx4938_tmrptr(i)->itmr = 0; - tx4938_tmrptr(i)->ccdr = 0; - tx4938_tmrptr(i)->pgmr = 0; - } + for (i = 0; i < TX4938_NR_TMR; i++) + txx9_tmr_init(TX4938_TMR_REG(i) & 0xfffffffffULL); /* enable DMA */ TX4938_WR64(0xff1fb150, TX4938_DMA_MCR_MSTEN); @@ -852,12 +846,13 @@ void tx4938_report_pcic_status(void) #endif /* CONFIG_PCI */ -/* We use onchip r4k counter or TMR timer as our system wide timer - * interrupt running at 100HZ. */ - void __init plat_time_init(void) { mips_hpt_frequency = txx9_cpu_clock / 2; + if (tx4938_ccfgptr->ccfg & TX4938_CCFG_TINTDIS) + txx9_clockevent_init(TX4938_TMR_REG(0) & 0xfffffffffULL, + TXX9_IRQ_BASE + TX4938_IR_TMR(0), + txx9_gbus_clock / 2); } void __init toshiba_rbtx4938_setup(void) |